Receiving error messase for local name change

receiving message on my imac that local name already exists on the local network and "would you like to change to new name number .local"
not sure why this is happenining any answers out there?

its happening becuase your trying to make a user that allready is on the computer, pick a diffrent user name and you wont get that message

Similar Messages

Local name change on network

Hi everybody.
We have a lot of macbooks with OS mavericks registered to our domain system. Every time we change kind of network (wifi, cable) , a new local name is assigned to our MacBooks.
We tried to modify the file /etc/hostconfig adding "HOSTNAME=-ComputerName- but it doesn't work.
We tried to assign the name through terminal command " scutil --set Hostname..." but it doesn't work too.
Do you have any idea or suggestion to solve this network isssue?
thanks

There are several possible causes for this behavior.
1. Two (or more) computers on the local network have the same Bonjour name, such as "X's-MacBook-Pro.local". Resolve the name conflict by renaming one or more of them in the Sharing preference pane.
2. You have two simultaneous connections to the same local network: probably Ethernet and Wi-Fi. If applicable, disconnect the Ethernet cable or turn off Wi-Fi.
3. A Mac wakes from sleep due to network traffic. This is a bug in OS X that may only affect some models.
4. A device that gets its network address from the router wakes from sleep, and the address it was using before has been assigned to another device.
5. A third-party wireless router has incompatible settings or firmware. In that case, refer to the manufacturer or ISP for support. Restarting the router may help, temporarily.
6. See also this support article.

R11:RECEIVED ERROR MESSAGES FOR AP INVOICE APPROVAL IN ORACLE WORKFLOW

Hi All,
We have this error:
### Detailed Problem Statement ###
Received the following error messages in sysadmin notifications:
Event Error Name: 100
Event Error Message: ORA-01403: no data found
Event Error Stack: HZ_DQM_SYNC>REALTIME_SYNCH(oracle.apps.ar.hz.DQM.realtimesync,
30665979B704AE043C0A81404B04A)
Event Error Name: WFE_DISPATCH_RULE_ERR
Event Error Message: [WFE_DISPATCH_RULE_ERR] ENAME=oracle.apps.ap.payment EKEY=10001
RULE=ap_payment_event_wf_pfg.rule_function SQLCODE=100 SQLERRM=ORA-01403: no
data found
Event Error Stack: WF_Event.dispatch_internal()
In addition, during the set-up of Oracle Approvals Management, there was no available list of
values in the Notification Style in the workflow configurator page.
Action Plan
=======
1) Confirm if the workflow is customized in any way.
2) Confirm whether you are able to select global preferences for the other invoices approval, meaning are you
getting the list of values for the other invoices.
There are no workflow customizations. We are trying to implement it to AP invoice
approval only.
Can you instruct me on how to test this one? I thought I could only select the global preferences from the workflow configuration window. And there are no distinction as to which invoice approval
process it is applicable. Where could I select the global preferences for other
invoices approval?
Thanks a lot

thanks hussein , but still we can not see LOV values even if we inserted data manually...:(
But it has improved and we moved on to another error which is:
*****received the error message:3120: Activity 'APINV/52822' has no performer
### Problem description or inquiry details ###
Received the following error message:
Error Message
3120: Activity 'APINV/52822' has no performer.
Error Stack
Wf_Engine_Util.Notification_Send(APINV, 115191_1, 52822, APINV:APINV_MRA) Wf_Engine_Util.Notification(APINV, 115191_1, 52822, RUN)
Encountered the following:
No list of values in the notification style field in the global configuration region in the Workflow Configuration Page
Please note that we could not update the workflow configuration page using the forms because there
is no list of values to select in the above-mentioned field. We just recently
changed the workflow administrator role from SYSADMIN to KCAALIM to reduce
changing of user log-in. We have previously used the sysadmin user log-in to
access the workflow configuration page. there was still no list of values for
the notification style. we changed the wf admin role to kcaalim using the sql:
udpate wf_resources set text = 'KCAALIM' where name like 'WF_ADMIN_ROLE';
Commit;
Hence, changing of wf admin role and user log-in (to sysadmin) won't help (just in case you would advise me to do so) since we tried it
already.
### Responsibility and navigational paths to reproduce ###
1. set-up the AME for ap invoice approval.
2. test an actual transaction.
3. when the list is generated, set-up workflow for AP approval.
when setting up the configuration page, there is no list of values available for the notification style. hence the workflow
configuration could not be updated.
4. Run the required programs (i.e., synchronizations)
5. run the approval workflow from the developer studio page.
6. review the status from the Status Monitor page.
7. The error message appears
8. payables, create a sample invoice.
9. validate and initiate approval.
10. review the approval history to find out the required approver. (the approver's name appears with 0 amount of approval)
11. check the notifications in the required approver's worklist.
12. there are no notifications sent.
Text continued in next action...
**** screen shots availble >http://rapidshare.com/files/176008682/error_-noperformer.doc.html
Thanks again...

PowerShell script for AD name change

I need to change all users logon name in AD to their first name.last name   Server 2003

Here is my suggestion of a PowerShell V1 script to rename all users (sAMAccountName):
# Filter on all users that have givenName and sn assigned.
$searcher=[adsisearcher]'(&(objectCategory=person)(objectClass=user)(givenName=*)(sn=*))'
[void]$searcher.PropertiesToLoad.Add('distinguishedName')
[void]$searcher.PropertiesToLoad.Add('sAMAccountName')
[void]$searcher.PropertiesToLoad.Add('givenName')
[void]$searcher.PropertiesToLoad.Add('sn')
$searcher.PageSize
= 200
$Results =
$searcher.FindAll()
ForEach ($Result
In $Results)
    # Retrieve values.
    $DN
= $Result.Properties.Item("distinguishedName")
    $NTName
= $Result.Properties.Item("sAMAccountName")
    $First
= $Result.Properties.Item("givenName")
    $Last
= $Result.Properties.Item("sn")
    # Construct desired "pre-Windows 2000 logon" name.
    $NewName
= "$First.Last"
    # Make sure new name 20 characters or less.
    If ($NewName.Length
-gt 20)
        # I don't know how to trim $First in PowerShell to make $NewName 20 characters.
    # Check if name should be updated (case insensitive).
    If ($NTName
-ine $NewName)
        # Trap possible error.
        Trap
            "Unable to rename user $DN to $NewName"
            "Error description: $_"
            Continue
        # Bind to user object in AD.
        $User
= [ADSI]"LDAP://$DN"
        # Assign new name.
        $User.sAMAccountName
= $NewName
        # Save the change to AD.
        $User.SetInfo()
Test first, by commenting out the SetInfo() statement and echo $DN and $NewName for all users. Note that the script could trim $First to limit $First.$Last to 20 characters, but I could not find a way to do this. Also, this script does nothing to prevent
duplicate sAMAccountName values, but the possible error will echo to the screen.
Richard Mueller - MVP Directory Services

[Swing] JTable & Oracle DB: SQL Query for Column Names Change

Hello,
I apologise for the 'stupid' thread subject name.
Now i have a JTable wich i fill with rows from an Oracle DB.
The query is something like this: "SELECT location_id, location_name FROM locations*bold*", and in the table i will have the columns names LOCATION_ID & LOCATION_NAME.
I want to change this query like: "SELECT location_id "Location ID", location_name "Location Name" FROM locations".
The only problem is that i CAN NOT insert "" inside ""
So if anyone know how to fix this 'problem' please share that with me.
Thank you,
B.

found it.. \" \"
:)

Transport error - Search for technical name

Hi Experts,
I have transported an order from T-System to Q-System without any errors. But from Q to P-System it shows me some errors.
The error protocol gives me some technical names which are not in the system. For example 4E15PO57C6T4LN8Y3EI6W0EA5.
Now I have no idea which object calls 4E15PO57C6T4LN8Y3EI6W0EA5. I can`t search for it or anything else.
How can I identify objects If I have just this id 4E15PO57C6T4LN8Y3EI6W0EA5?
Thank you very much for all answers.

Hi Marian,
If it is a transformation ID, dso etc you can search for the ID in the DEV system by selecting RSA1 and ctrl + F to find. Paste the ID in and search.
If it is a bex object (query, view, variable etc) then you can use table RSZELTDIR from se16 enter then name of the object in ELTUID. This will display the name of the object.
Thanks,
Nick.

BADi or exit for customer name change

Hi all,
i want to retrieve the customer details based on the name entered in the selection screen.
but the customer name is stored in the Database like combination of CAPITAL letters and small letters and Numbers and some special characters like -(Hyphen), .(DOT), etc.
Assume name is stored in the database like: RAJA RAM.
but the selection-screen , if the i enter raja ram, or Raja Ram, it should fetch from the database.
what i am thinking that at the time of customer creation , i want conver the customer name into either CAPITALS or Small letters.
for this is there any BADI or Exit is available.?
Thanks
Vimala.

In what table are these customers stored? In tabel BUT000 for example, you have two columns in which the names are always stored in capitals to avoid these situations. And these columns are part of the secondary index as well. So no need to convert.
If you do want to convert, despite the above argument, you will have to tell what transaction you are using to create / change customers to find the exit / badi.

Only in Firefox Ver. 7.0.1, receive error message for one site only " Tired help advice -didn't workAn error occurred while displaying this page"

The above error message suddenly appeared trying to load Schwab.com. Couldn't get help to solve problem. Uninstalled Firefox and then downloaded fresh version - still doesn't. Note I have McAfee security suite installed. Performed Delete of Firefox and then reinstall - still no help

Download Microsoft Visual C++ 2005 Redistributable Package (x86) at
http://www.microsoft.com/downloads/details.aspx?FamilyID=32bc1bee-a3f9-4c13-9c99 -220b62a191ee&DisplayLang=en
It should fix the sidebyside errors. It did for me.

ITunes Get Artwork: "Artwork for [album name] cannot be found. You do not have permission to access the requested resource."

I just installed iTunes 10.5 (latest version as of 11 Jan 2012), onto a computer running Windows 7 Ultimate x64. I loaded my music library into it, it compiled the list and separated them by album. But even though I'd assigned most of the albums artwork through my Zune management software (a Microsoft product), almost none of them populated into iTunes. So I went through and started asking the software to try to find album artwork where possible.
I did this a few times album by album, then I decided to select multiple albums and see what happened. No problems. Then I selected all of the albums I had--about 600 in all--and asked it to get artwork. It seemed to process for a bit, then came back with the error, "Artwork for [album name] could not be located. You do not have permission to access the requested resource." I tried this on several individual albums, only to receive that same error.
The very first time I did it, I was told I needed an account with the iTunes store to make it work, so I signed in using an old Apple ID (the account had been inactive for so long it had been locked for security, I unlocked it and that seemed to be that). Then I did what I described above.
The weird thing--to me--is that I can still add artwork to the albums manually if I want to, from imagery stored locally on my own computer. The only thing it seems to have a problem with is when I ask it to go find artwork from the iTunes store.
Do I need to uninstall iTunes and then reinstall it? Did something go wrong with the process of authorizing the computer to work with the iTunes store? Do I need to de-authorize and then re-authorize the computer? Could this be something related to Windows permissions on the iTunes library?

Right on about how to reset the warnings, it was exactly that.
I went through the steps to let iTunes through Windows Firewall, but still get the same problem when I access the iTunes store (and even though I followed the steps in the help file to the letter, I notice it still says iTunes is NOT enabled for it). And now, thanks to the re-enabled warnings, when I try to get it to download artwork for single albums, this is what I get:
"Artwork for [album name] could not be found. An unknown error occurred (-50)."
New results from the diagnostics too:
Microsoft Windows 7 x64 Ultimate Edition Service Pack 1 (Build 7601)
Acer Aspire 8930
iTunes 10.5.2.11
QuickTime 7.7.1
FairPlay 1.13.37
Apple Application Support 2.1.6
iPod Updater Library 10.0d2
CD Driver 2.2.0.1
CD Driver DLL 2.1.1.1
Apple Mobile Device 4.0.0.97
Apple Mobile Device Driver 1.57.0.0
Bonjour 3.0.0.10 (333.10)
Gracenote SDK 1.9.5.502
Gracenote MusicID 1.9.5.115
Gracenote Submit 1.9.5.143
Gracenote DSP 1.9.5.45
iTunes Serial Number 0034AA84038F17E0
Current user is an administrator.
The current local date and time is 2012-01-13 09:21:52.
iTunes is not running in safe mode.
WebKit accelerated compositing is enabled.
HDCP is supported.
Core Media is supported.
Video Display Information
NVIDIA, NVIDIA GeForce 9700M GT
**** External Plug-ins Information ****
No external plug-ins installed.
The drive Q: SEMC CD-ROM Rev 0001 is a USB 1 device.
iPodService 10.5.2.11 (x64) is currently running.
iTunesHelper 10.5.2.11 is currently running.
Apple Mobile Device service 3.3.0.0 is currently running.
**** Network Connectivity Tests ****
Network Adapter Information
Adapter Name: {403AFC2C-1FCE-43B2-B9E8-D414B29FF5D1}
Description: Intel(R) WiFi Link 5100 AGN
IP Address: 10.100.3.244
Subnet Mask: 255.255.248.0
Default Gateway: 10.100.0.1
DHCP Enabled: Yes
DHCP Server: 10.100.0.1
Lease Obtained: Fri Jan 13 09:00:56 2012
Lease Expires: Sat Jan 14 09:00:56 2012
DNS Servers: 202.174.158.10
8.8.8.8
Adapter Name: {B50EA825-FB09-459D-8855-77E5A43E18B1}
Description: Atheros AR8121/AR8113/AR8114 PCI-E Ethernet Controller
IP Address: 0.0.0.0
Subnet Mask: 0.0.0.0
Default Gateway: 0.0.0.0
DHCP Enabled: Yes
DHCP Server:
Lease Obtained: Thu Jan 01 04:30:00 1970
Lease Expires: Thu Jan 01 04:30:00 1970
DNS Servers:
Active Connection: LAN Connection
Connected: Yes
Online: Yes
Using Modem: No
Using LAN: Yes
Using Proxy: No
SSL 3.0 Support: Enabled
TLS 1.0 Support: Enabled
Firewall Information
Windows Firewall is on.
iTunes is NOT enabled in Windows Firewall.
Connection attempt to Apple web site was successful.
Basic connection to the store failed.
An unknown error occurred (-50).
Connection attempt to Gracenote server was successful.
Last successful iTunes Store access was 2012-01-12 07:09:14.

Automatic SMS/Mail notification for local auto-reaction method

Hello!
We would like to be informed via SMS/Mail about the Availability of satellite system.
When we assign a Local auto-reaction method for this MTE (Availability_SysPercent_ABAP) we receive the SMS/Mail notification only in case we manually start the auto reaction method from RZ20.
When we try to assign the central auto reaction method from RZ20 we get the following error:
Assignment for local system only works with nodes from agent segments
What is the procedure for the automatic SMS/Mail notification in case of local auto-reaction method?
Thank you very much!

Dear Team,
As I have understood, you want to be informed each time a satellite system is not up and running ?
Option 01
========
1. Install the CCSMPING agent in SOLMAN
2. Create your satellites systems through RZ21 - Technical Infrastructure - Availability Monitoring - Configure CCMSPING ...
    Create all satelittes systems ...
3. Then, from SOLMAN_WORCENTER, in SYSTEM Monitoring, you have the status of each satellites systems created
    in RZ21 (point 2).
This option will not advised when a satellite system is down. But from one WEB page, you will have the status of all satellites systems.
Option 02
========
1.Install the CCSMPING agent in SOLMAN
2. Create your satellites systems through RZ21 - Technical Infrastructure - Availability Monitoring - Configure CCMSPING ...
    Create all satellites systems.
3. RZ20 - SAP CCMS Monitor Templates - Double-click on "Availability and Performance Overview"
    Open "Availability" - Then, all satellites systems which have been added under point 2 will appear.
4. Select one satelitte system
5. Open "Availability"
6. Select "ABAP: Checked by CCMSPING.<solman-hostname>.00"
7. When selected, click on "Properties" button.
8. Then, you assign here an auto-reaction method - for example :
    "ccms_send_alert_to_alm_ccms_containerv4".
9. Copy this method to Zccms_send_alert_to_alm_ccms_containerv4.
10. In this method, add you email address.
11. Then, check that job "SAP_CCMS_MONI_BATCH_DP is running. This job collects data in the CCCMS (RZ20).
12. Then, the alert will be automatically sends to your email adress.
Hope it helps ?
Best regards
SAPNetWeaverAdmin

Lumira Login Error "Check the Server Name and Instance ID"

Dear Experts
I installed Lumira Desktop and was able to connect to the
HANA Server.
Later while I was working the software hanged and I had to
shut it down.
Now, after re-opening the software I receive error "Check the Server Name and Instance ID"
(though the server credentials are same as error and correct”
Any suggests on how to rectify

I wonder if one of the following KBAs may give you a clue?
1995325 - Error HDB 11009: The dataset could not be published to SAP Lumira Server because publishing to the SAP HANA layer failed. Lumira Server
2134259 - Lumira LaunchPad Logon Hangs
- Ludek
Senior Support Engineer AGS Product Support, Global Support Center Canada
Follow me on Twitter (#SAPLumira)
Got Enhancement ideas? Use the SAP Idea Place

"Error opening for writing" error msg.

While installing Shockwave Player 12.1.0.150 I received "Error opening for writing" error message. The file C:\Windows\System32\Adobe\Director\SwDir_1210150.dll is missing.
I uninstalled older versions of it using Add/Delete function of Programs and Features in the Control Panel. My OS is Windows 7 Pro, and default browser is Google Chrome. How/Where to fix this? Thank you in advance.

SMH What is up with this download???? NOW, I used the Slim version, it installed with no problem, and in the SysWOW folder where I found the missing .dll file. However, when I check if it's working and it's not. Checked Chrome's plug-ins and it's not there. This is enough to make a bulldog break his chain.

Name Change Issues

I have tried several times to change my name, uploaded supporting documents and nothing has happened. Why is this such an issue and why do I not even get any confirmation that I tried? Anyone else have this problem and were able to get around it? This is seriously frustrating. Thanks for any help.

I am so glad it's not just me. I've been trying to change to my married name for ages - I wouldn't even bother at this point, except parcels keep defaulting to the name on my PayPal account and then I have issues getting them from the post office. I uploaded docs and these were fine, except I hadn't confirmed the reason for my name change - it doesn't give you a space to, in the limited character box I was just able to confirm my new name - so they messaged me asking me to confirm the info, which I did. Then I get another message saying that they can't change my name because: "This was due to a change in the original email subject or not utilizing the customized contact form via the website." Now, I didn't change the email subject heading and the original message didn't advise me to contact them in any special way. So I submitted a new request. Now the image I'm sending them is too blurry - it's the exact same file I sent you last time and it's perfectly clear. They want me to submit supporting information, which is fine, except the instructions on how to do this were apparently written by someone using a different paypal to me. I finally found the link to the resolution centre - which was not where they said it would be - where I can allegedly upload a file. Well, if you can upload a file to there I can't see how. Maybe I'm just an idiot. Also, they insist on communicating with me using my maiden name - which wouldn't bother me except they've hacked me off! I've told them I have a new name, even if they aren't satisfied they've confirmed it for my account, it's just basic courtesy to address me how I asked while resolving my problem. Not that they seem bothered about resolving my problem at all. Argh. rant over

Undo name change

I just (thought) I double clicked a song to start it playing. Unfortunately, rather than start to play, it highlighted the song for me to rename it. I accidentally hit the enter key. It was an obscure piece of classical music that I don't know the name of (well, I know the name (par of), but as part of the name I usually include other info which I don't know). So the question, Is there an undo in iTunes (even Windows Explorer has an undo function for accidental name changes)?

Yeah, I know. If you highlight a song and then click it, it goes to rename mode. The difference between that and double-clicking can be a matter of split second timing! And since there is no Undo, you just have to be careful. Anyway, enjoy the music!

My ipad receives email with the hotel wifi but will not send. The error message is "user name or password for ........is incorrect" but both are correct and unchanged. Restarting iPad didnt help.

My iPad receives email on the hotel wifi but will not send. The error message reads "user name or password for smpt......is incorrect" but both are correct and unchanged. Restarting iPad did not help.

I did try this too, but when I access my webmail on the iPad, the iPad doesn't allow me to type my message. I am able to enter in the "to" address and the "subject" line, but then the keyboard will not come up for me to type my message. Is there some trick to this? Very frustrating!

Receiving error messase for local name change

Similar Messages

Maybe you are looking for