Receiving run time error GETWA_NOT_ASSIGNED  for a particular a Datasource

Hi all,
In the test system receiving run time error GETWA_NOT_ASSIGNED  for a particular a Datasource 
8ZSD_O07 while trying check PSA maintenance.  For rest of data source able to display the PSA maintenance.
Kindly help to resolve the issue. 
Thanks

Re-generate Export Data Source for ZSD_O07 in test system .
Please share the result
Regards
Anindya

Similar Messages

  • Package failed with run time error: " GETWA_NOT_ASSIGNED".

    Hi,
    One of our custom package is failing with run time error " GETWA_NOT_ASSIGNED". We are getting this error after refresh. Infact this package is working fine both in production and Dev, but in QA system it giving runtime error.
    Here with I am pasting run time error details. Please see...If any one have any idea or clue or if you have faced this kind of error.
    Thanks is advance.
    Error Details.
    What happened?
        Error in the ABAP Application Program
        The current ABAP program "CL_UJK_CUSTOM_LOGIC===========CP" had to be
         terminated because it has
        come across a statement that unfortunately cannot be executed.
    What can you do?
        Note down which actions and inputs caused the error.
        To process the problem further, contact you SAP system
        administrator.
        Using Transaction ST22 for ABAP Dump Analysis, you can look
        at and manage termination messages, and you can also
        keep them for a long time.
    Error analysis
        You attempted to access an unassigned field symbol
        (data segment 32774).
        This error may occur if
        - You address a typed field symbol before it has been set with
          ASSIGN
        - You address a field symbol that pointed to the line of an
          internal table that was deleted
        - You address a field symbol that was previously reset using
          UNASSIGN or that pointed to a local field that no
          longer exists
        - You address a global function interface, although the
          respective function module is not active - that is, is
          not in the list of active calls. The list of active calls
          can be taken from this short dump.
    Regards, Trine

    Hi Trine,
    the error is about some field you are trying to map using field-simbols, that is diferent in the other system.
    Go to the code program in the st22, there you will see when the erros occurs e what field gives the error.
    Best Regards,
    António

  • Run time Errors GETWA_NOT_ASSIGNED at Time of Print Reports.

    Hello hy All experts.
    I ma trying to print Reports, but at time of preview i got an error message. Run time Errors GETWA_NOT_ASSIGNED.
    Please Give me Solutions.
    Thnks
    Bhavesh Panchal.
    Baroda

    FORM fetch_data.
      break mtabap.
      SELECT *
              FROM vbep
              INTO TABLE it_vbep
              WHERE edatu IN so_edatu
              AND vbeln IN so_vbeln.
      IF NOT it_vbep[] IS INITIAL.
        SELECT *
                       FROM vbak
                       INTO TABLE it_vbak
                       FOR ALL ENTRIES IN it_vbep
                       WHERE vbeln = it_vbep-vbeln
                       AND kunnr IN so_kunnr.
      ENDIF.
      IF NOT it_vbak[] IS INITIAL.
        SELECT *
                FROM vbpa
                INTO TABLE it_vbpa
                FOR ALL ENTRIES IN it_vbak
                WHERE vbeln = it_vbak-vbeln
                AND   posnr = space.
        SELECT *
                 FROM vbap
                 INTO TABLE it_vbap
                 FOR ALL ENTRIES IN it_vbak
                 WHERE vbeln = it_vbak-vbeln.
    Select all Customer Data
        SELECT * FROM kna1 INTO TABLE it_kna1
        FOR ALL ENTRIES IN it_vbak
        WHERE kunnr = it_vbak-kunnr .
        SELECT *
                 FROM vbkd
                 INTO TABLE it_vbkd
                 FOR ALL ENTRIES IN it_vbap
                 WHERE vbeln = it_vbap-vbeln.
               and posnr = IT_VBAP-POSNR.
        SELECT *
                 FROM vbbe
                 INTO TABLE it_vbbe
                 FOR ALL ENTRIES IN it_vbap
                 WHERE vbeln = it_vbap-vbeln
                 AND posnr = it_vbap-posnr.
        SELECT *
                 FROM vbup
                 INTO TABLE it_vbup
                 FOR ALL ENTRIES IN it_vbap
                 WHERE vbeln = it_vbap-vbeln
                 AND posnr = it_vbap-posnr.
        SELECT *
                 FROM konv
                 INTO TABLE it_konv
                 FOR ALL ENTRIES IN it_vbak
                 WHERE knumv = it_vbak-knumv
                 AND kinak = space .
        SELECT *
              FROM vbrp
              INTO TABLE it_vbrp
              FOR ALL ENTRIES IN it_vbak
              WHERE aubel = it_vbak-vbeln.
        IF NOT it_vbrp[] IS INITIAL.
          SELECT * FROM likp
                            INTO TABLE it_likp
                            FOR ALL ENTRIES IN it_vbrp
                            WHERE vbeln = it_vbrp-vgbel.
          SELECT * FROM lips
                            INTO TABLE it_lips
                            FOR ALL ENTRIES IN it_vbrp
                            WHERE vbeln = it_vbrp-vgbel
                            AND posnr = it_vbrp-vgpos.
        ENDIF.
      ENDIF.
      LOOP AT it_vbap.
        itab-posnr = it_vbap-posnr.
        itab-posar = it_vbap-posar.
    ITAB-BRGEW = IT_VBAP-BRGEW.
        itab-brgew = it_vbap-brgew.
        itab-ntgew = it_vbap-ntgew.
        READ TABLE it_vbak WITH KEY vbeln = it_vbap-vbeln.
        itab-vbeln = it_vbak-vbeln.
        itab-netwr = it_vbak-netwr.
        itab-kunnr = it_vbak-kunnr.
        READ TABLE it_vbep WITH KEY vbeln = it_vbap-vbeln.
        itab-edatu = it_vbep-edatu.
        READ TABLE it_kna1 WITH KEY kunnr = it_vbak-kunnr.
        itab-name1 = it_kna1-name1.
        READ TABLE it_vbkd WITH KEY vbeln = it_vbap-vbeln .
        itab-bstdk = it_vbkd-bstdk.
        itab-bstkd = it_vbkd-bstkd.
        READ TABLE it_vbrp WITH KEY aubel = it_vbap-vbeln aupos = it_vbap-posnr.
        READ TABLE it_lips WITH KEY vbeln = it_vbrp-aubel posnr = it_vbrp-aupos.
        itab-delivery = it_lips-vbeln.
        itab-lfimg = it_lips-lfimg.
        READ TABLE it_likp WITH KEY vbeln = it_vbrp-aubel   .
        itab-lfdat = it_likp-lfdat.
       itab-ntgew = it_likp-ntgew.
        break mtabap.
        READ TABLE it_vbup WITH KEY vbeln = it_vbap-vbeln posnr = it_vbap-posnr.
        itab-lfsta = it_vbup-lfsta.
        READ TABLE it_vbep WITH KEY vbeln = it_vbap-vbeln posnr = it_vbap-posnr.
        itab-wmeng = it_vbep-wmeng .
        itab-bmeng = it_vbep-bmeng.
        READ TABLE it_vbbe WITH KEY vbeln = it_vbap-vbeln posnr = it_vbap-posnr.
        itab-omeng = it_vbbe-omeng .
        READ TABLE it_konv WITH KEY knumv = it_vbak-knumv
                                    kposn = it_vbap-posnr
                                    kschl = 'PR00'.
       ITAB-KBETR = IT_KONV-KBETR / 10. " CONDITION RATE
        itab-kbetr = it_konv-kbetr.
        itab-kwert = it_konv-kwert . "CONDITION VALUE
       itab-pending_val =  ITAB-OMENG * ITAB-KWERT .
        itab-pending_val =  itab-omeng * itab-kbetr .
        APPEND itab.
      ENDLOOP.
    ENDFORM. "data_retrieval
    *&      Form  build_listheader
          text
         -->IT_LISTHEADER  text
    Show quoted text -
    FORM build_listheader USING it_listheader TYPE slis_t_listheader.
    DATA HLINE TYPE SLIS_LISTHEADER.
      DATA: ls_line TYPE slis_listheader.
    bhavesh
    HLINE-INFO = 'report Developed by Bhavesh'.
    HLINE-TYP = 'H'.
    Header
    Bhavesh
      CLEAR ls_line.
      ls_line-typ = 'H'.
    LS_LINE-KEY: not used for this type
      ls_line-info = 'Sales ORDER Report'.
      APPEND ls_line TO it_listheader.
    bhavesh
    ***Selection
      CLEAR ls_line.
      ls_line-typ = 'S'.
      ls_line-key = 'Key 1'.
      ls_line-info = 'SFEL'.
      APPEND ls_line TO it_listheader.
      ls_line-key = 'Key 2'.
      ls_line-info = 'SFEL'.
      APPEND ls_line TO it_listheader.
    ***Action
      CLEAR ls_line.
      ls_line-typ = 'A'.
    LS_LINE-KEY: not used for this type
      ls_line-info = 'Status list'.
      APPEND ls_line TO it_listheader.
    ENDFORM. "BUILD_LISTHEADER
    *ENDFORM. "build_listheader
    *&      Form  display
    *&       text
    FORM display.
      CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
            EXPORTING
              i_callback_program      = sy-repid
             i_callback_top_of_page  = 'TOP_OF_PAGE'
              is_layout               = alv_layout
              it_fieldcat             = i_fieldcat
             it_events               = gt_events[]
              i_callback_user_command     = 'USER_COMMAND'
              i_grid_title            = 'BHAVESH REPORT'
            TABLES
              t_outtab                = itab[].
      CLEAR : itab .
    ENDFORM.                    "display
    *&      Form  top_of_page
          text
    FORM top_of_page.
      CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
        EXPORTING
          it_list_commentary = it_listheader[].
    i_logo = 'ENJOYSAP_LOGO'.
    I_END_OF_LIST_GRID =
    ENDFORM. "TOP_OF_PAGE

  • Run time Errors GETWA_NOT_ASSIGNED Date and Time

    Hi Experts,
    Please help me to resolve this...
    While Executing the conversion program in EMIGALL, I come across the following  short Dump.
    """Runtime Errors GETWA_NOT_ASSIGNED
    Date and Time DD:MM:YYY xx:xx:xx
    Short text
    Field symbol has not yet been assigned.
    Any help will be appreciated.""""""
    Thanks and Regards
    Vipin KV

    Hello,
    Can you please provide some more details from the dump?
    Regards
    Olivia

  • Run Time Error- Getwa_not_assigned

    Getwa_not_assigned
    Program : CL_FAA_DC_SEGMENTS
    ROW 50
    Module type  ( method)
    Module name  HLPSEGCREATE

    Hi,
    You missed out to fill some parameters before passing it to function module or any call. you can look at the below link for more information
    Need help on ALV Print dump.
    Regards
    Sudheer

  • DTW 2007B PL:7 - DTW always showing run time error on record key no. 1377

    Hi,
    I've encountered a strange problem while transferring Customer Master.
    Firstly, the DTW throws error randomly asking for 'Ship To' Address along with given 'Bill To' Address.
    Also, at Record Key No. 1377, DTW shows run time error & asks for debugging.
    Once the debugging is started, it goes on & on with any probable end of debugging.
    And if the debugging option is not chosen DTW crashes & the corresponding error file is blank.
    If anyone had encountered similar problem, pls respond ASAP.
    Thanks,
    Prashant

    Hi Kapil,
    did you use a template for importing the BPMaster and BPAddress data ? Such error normally causes by wrong LineNum and wrong signs for type of addresses.
    Please reffer to SAP note 899093 and 979116. This would be helpful.
    Regards Steffen
    PS. templates are located in <program folder>\SAP\Data Transfer...\Template\Template\oBusinessPartners

  • Run time Error in accessing Analyzer on VIsa 64 bit, Office 2007 and SAP GU

    Hello experts-
    I can not run Bex Analyzer using WINDOWS VISTA HOME PREMIUM 64 bit OS, Office 2007 and SAP GUI 7.10
    I am receiving Run time error "5" and does not let me open or create a new query. Please share your experience and thoughts so that I could be able to fix this issue
    Thanks

    Hi Suresh,
    Check the RFC connection of Source system. It seems that your rfc connection is not working properly. So make sure that you are able to establisthed the connection between these 2 systems.
    Regards
    Subhash

  • Portal run time error while accessing R/3 transaction code

    Hi all,
    We have configured R/3 system and BW system to the Portal.
    In R/3 system we have user ids named "ADMIN" and "FIAR" . ADMIN is for adminstrator and FIAR is for FIAR module. I created the same user ids in Portal , for ADMIN i have assigned ADMINSTRATOR role and for FIAR BI as it is also for our BW system.
    But when iam checking the r/3 iviews for FIAR , it shows PORTAL RUN TIME ERROR , while for ADMIN it works fine.
    Can any body have some ideas about this , pts will be assigned,
    Thanks ..

    Have you collected the error log details which looks similar to the below one??
    "The initial exception that caused the request to fail was:
    User has no RFC authorization for function group SDIFRUNTIME.
    com.sap.mw.jco.JCO$Exception: (104) RFC_ERROR_SYSTEM_FAILURE: User has no RFC authorization for function group SDIFRUNTIME.
    at com.sap.mw.jco.MiddlewareJRfc.generateJCoException(MiddlewareJRfc.java:455)
    at com.sap.mw.jco.MiddlewareJRfc$Client.execute(MiddlewareJRfc.java:1442)
    at com.sap.mw.jco.JCO$Client.execute(JCO.java:3979)
    at com.sap.mw.jco.JCO$Client.execute(JCO.java:3416)
    at com.sap.mw.jco.JCO$Repository.execute(JCO.java:20471)"

  • Run time error in report for a particular month : "  TIME_OUT"

    hi frends, we have developed a report for PM module in SAP. it is a monthy report. and user have to enter the month for which he wants to see the report. we are facing runtime error for a particular oct. and nov month of 2009 only , all other months are working fine. The error is :
    The program "ZPMR_EQUP_PERFORMANCE_REPORT" has exceeded the maximum permitted
      runtime without
    interruption and has therefore been terminated.
    what could be the reason.

    Hi  Achalmehra,
    By seeing the run time error "TIME_OUT", I suspect this is due to Performance issue.
    There is a chance that they had huge data dump into PM server from other servers and there is also chance that
    They have many records available for these 2 months.
    IN any case, please chk with Run time analysis (SE30) by executing your program...
    If it displays the graph more than 30 % for Database then it is an issue with the Performance.
    Also chk with SQL trace.....
    Second case :
    Check you had not used Nested Loops,  Select queries in Loop.
    Make sure you use Binary search for  Read Statements....
    Third : Chk with the runtime error at which place of the code it is throwing Time_out error at Source code extract.
    To help you further, please paste your code here and also paste the Run time error that you receive with the select queries.
    Regards,
    Kittu

  • Run time error '9' while installing BIP Desktop 10.1.3.4.1 for Windows

    Hi,
    I've been getting 'run time error '9' Subscript out of range error while installing BIP Desktop.
    I have MS Word 2003 and the laptop's OS is Windows XP SP3. I have searched the net and this forum for suggestions
    and followed what was recommended (install .NET framework 2.0, make sure no MS Office processes are not running while
    installing the software, Admin rights at Registry level on BI Publisher folder etc..) but no use.
    This is a new laptop which I just received. On my existing laptop (which has similar configuration), I've installed BIP long time
    ago and do not remember facing this error. If any one has come across this problem recently and was able to trouble shoot it,
    please share with me how you were able to overcome the problem.
    Thanks and Regards,
    Srini

    Hello,
    Since I haven't heard from any one, I have opened a service request with Oracle support.
    Support recommended that I down load a desktop publisher from edelivery.oracle.com but even that didn't help.
    Will keep you posted.
    Regards,
    Srini

  • After updating my itunes per the update notice I received a run-time error R6034 message. Now I am unable to use iTunes. What can I do to repair this error?

    After updating my iTunes per the update notice I received a run-time error R6034. Now I am unable to access iTunes at all.
    Can someone tell me how to correct this problem?

    Uninstall your existing copy of iTunes. Delete any copies of the iTunesSetup.exe (or iTunes64Setup.exe) installer files from your downloads areas for your web browsers and download a fresh copy of the iTunes installer from the Apple website:
    http://www.apple.com/itunes/download/
    (The current build of the 11.1.4.62 installer was changed a few days ago, which fixed the bulk of the reports of MSVCR80.dll/R6034/APSDaemon.exe/Error-7/AMDS-could-not-start trouble ... but the build number on the installer was not changed. So we're trying to make sure you do the reinstall using a "new good" 11.1.4.62 installer instead of an "old bad".)
    Does the install with the new copy of the installer go through properly? If so, does that clear up the error message?
    If you still have the same error messages cropping up, then try the procedures from the following user tip:
    Troubleshooting issues with iTunes for Windows updates

  • Run time error in FMBB after execution of RGZZGLUX GETWA_NOT_ASSIGNED FM

    Hello Experts,
    We have activated funds management in Development it is working fine without any issues. Transported same changes to Quality system and executed Program RGZZGLUX.
    Issue: Run time error in FMBB transaction code even after execution of program RGZZGLUX. similar error in funds center group also.
    Category               ABAP Programming Error
    Runtime Errors         GETWA_NOT_ASSIGNED
    ABAP Program           SAPLFMBD_DATABASE_ACCESS
    Application Component  PSM-FM-BCS-BU
    Date and Time          10.06.2014 13:28:36
    Short text
        Field symbol has not yet been assigned.
    Requirement:  Please let us know how to solve this issue
    we have checked note:0000939958 - and changed Inactive status for tables FMIT, FMIP and FMIA, but no use, when we run program RGZZGLUX, it has deactivated this tables again.
    Regards,
    Chalapathi

    Hello Shyam / Javed,
    Thank you for your inputs.
    I have solved issue, now it is working fine.
    Activated EA-PS and included into transport request. executed program RGZZGLUX.
    Note used to solve issue :0000908007
    Regards,
    Chalapathi

  • Run time error while running BDC for production order creation and confirmation:

    Dear Gurus,
    We have a situation, where the users are trying to do the entries creation of order or confirmation (through manual and BDC). But, if there is any kind of a deficit quantities in consumption or GR quantity, then it is going to run time error and Dumps are coming in program SAPLCORB
    and the transaction code is coming for CO11N.
    How to avoid this error to run the production system in smoothing way...Any flash lights on this will be great full
    Regards,
    Madhu.G

    Hi Madhu,
    Expert Caetano has rightly point out. Refer Note 1840705 - RAISE_EXCEPTION short dump if running CO11N in background
    Cause
    The short dump is triggered because SAP transaction CO11N contains new GUI elements that cannot always be dealt with in a background process,
    such as the confirmation texts.
    Resolution
    SAP recommends that the standard production order BAPIs, such as BAPI_PRODORDCONF_CREATE_TT, should be used to post a confirmation in background.
    If this is not feasible, the following workaround may be uses:
    Define a confirmation profile in transaction OPK0; 
    In the detail areas, remove the area "Confirmation text"; 
    Set this profile as standard, so that it is chosen automatically by the system when a batch-job
    is started; 
    Assign this confirmation profile to the batch user with transaction SU3 using parameter CORUPROF.
    Also see Note 429432 - CO11N: Batch input in background dumps if long text is maintained
    Refer to note 1154692 - Endless loop during confirmation in background if you doing Auto GR during confirmations
    Thanks & Regards,
    Ramagiri

  • Run time error while doing VL10B transaction for STO

    Dear All,
    We are facing problem of run time error while creating Delivery (VL10B) for  STO .We have two company codes .For one company code its working fine .But we are trying for another company code ,this error coming.error detals
    Error in the ABAP Application Program
    The current ABAP program "SAPLV05I" had to be terminated because it has
    come across a statement that unfortunately cannot be executed.
    Error analysis
        An exception occurred that is explained in detail below.
        The exception, which is assigned to class 'CX_SY_OPEN_SQL_DB', was not cau
         in
        procedure "SD_PARTNER_UPDATE" "(FUNCTION)", nor was it propagated by a RAI
         clause.
        Since the caller of the procedure could not have anticipated that the
        exception would occur, the current program is terminated.
        The reason for the exception is:
        If you use an ABAP/4 Open SQL array insert to insert a record in
        the database and that record already exists with the same key,
        this results in a termination.
        (With an ABAP/4 Open SQL single record insert in the same error
    Kindly suggest as to how to resolve this asap.
    regards
    umesh

    These Kind of Errors Generally Occor for the wrong maitnaince of the partner functions. If you are using any user exits to detremine the partner functions. check the logic in that routine.
    Because we do frequently get this error, but only if we hae not maintained as per the rule written in the  user exit..
    The USer exits for partner Determiantion to check is Function Module EXIT_SAPLV09A_003.  THis gets activated, if you have give the source parner function as "X/Y/Z" in your partenr determiantion procedures.

  • Run time error for program: RPCALCU0_CE

    Hi Abapers,
    When we execute the standard program: RPCALCU0_CE from SE38. Below run time error is getting trigerred before selection screen is displayed. Below are the run time error details -
    Runtime Error          UNCAUGHT_EXCEPTION
    Exception              CX_HRPA_INVALID_PARAMETER
           Occurred on     08/04/2010 at   01:22:17
    What happened?
    The exception 'CX_HRPA_INVALID_PARAMETER' was raised but was not caught at any
    stage in the
    call hierarchy.
    Since exceptions represent error situations, and since the system could
    not react adequately to this error, the current program,
    'CL_HRPA_RESOLVE_EXCEPTION=====CP', had to
    be terminated.
    Error analysis
    An exception occurred. This exception is dealt with in more detail below
    . The exception, which is assigned to the class 'CX_HRPA_INVALID_PARAMETER',
    was neither
    caught nor passed along using a RAISING clause, in the procedure
    "RESOLVE_EXCEPTION" "(FORM)"
    Since the caller of the procedure could not have expected this exception
    to occur, the running program was terminated.
    The reason for the exception is:
    Invalid parameter EXCEPTION, value
    The occurrence of the exception is closely linked to the occurrence of a
    previous exception, "CX_HRPA_VIOLATED_PRECONDITION", which occurred in the
    program "CL_HRPA_MASTERDATA_FACTORY====CP" -
    specifically in line 6 of the (Include) program
    "CL_HRPA_MASTERDATA_FACTORY====CM004".
    The reason for the exception was:
    Precondition violated
    Please suggest the solution to overcome this.

    Hey,
        I could not figure your exact problem. But you can go to the transaction ST22 to take a better look at the error that you got. This gives a detailed explanation of the exact error that you are getting. The moment you enter this transaction, you will see the number of runtime errors you got today. Just click on 'Today'. This will give you the list of runtime errors. Click on the relevent error and you can get a much more detailed explanation of the same.
    Hope this helps.

Maybe you are looking for