Run time Errors GETWA_NOT_ASSIGNED Date and Time
Hi Experts,
Please help me to resolve this...
While Executing the conversion program in EMIGALL, I come across the following short Dump.
"""Runtime Errors GETWA_NOT_ASSIGNED
Date and Time DD:MM:YYY xx:xx:xx
Short text
Field symbol has not yet been assigned.
Any help will be appreciated.""""""
Thanks and Regards
Vipin KV
Hello,
Can you please provide some more details from the dump?
Regards
Olivia
Similar Messages
-
Error: 0271: Real Time Clock Error - Check Date and Time settings.
Hello all,
I have lenovo T430s laptop that is configured with Bitlocker encruptions and TPM PIN entry. I don't think that has anything to do with the error msg I am getting but here it is. Error: 0271: Real Time Clock Error - Check Date and Time settings.
Press Esc to continue or F1 to enter setup. I am unable to get into BIOS or even the login screen for Windows 7.
Any advice would be appreciated.Thanks to everyone for the help. Just want to close this out. I had a IBM/Lenovo technician here today and he replaced the CMOS battery. Upon the change, the computer is fine being reconnected to the dock (the three times I tried it). So it has been resolved with the battery. Surprised by the incompatibility claim because I am not having issues now. Wondering if it's just a USB 2.0 vs. 3.0 thing (and Lenovo trying to sell more peripherals, of course).
Thanks! -
Real Time Clock Error - Check Date and Time settings, System CMOS Checksum bad
Hello everybody,
Can help anyone to resolve my problem.
I have an Thinkpad W520 (42823FG), BIOS 8BET60WW 1.4 When I disconect AC power and remove battery and connect again, I see this message on screen:
"Real Time Clock Error - Check Date and Time settings, System CMOS Checksum bad
Press Esc to continue or F1 to enter Setup"
Is this a system board problem or CMOS battery problem ?
Thank youHello and welcome,
It's probably (hopefully) just the CMOS battery. The easiest way to find out is to just replace that battery.
Page 85 of the Hardware Maintenance Manual:
Hardware Maintenance Manual
Here's an example of the battery. I'm not recommending (or not) this vendor:
http://www.ebay.com/itm/New-Lenovo-ThinkPad-W500-W510-W520-W530-W700-W701-W701ds-CMOS-RTC-Backup-BAT...
Z.
The large print: please read the Community Participation Rules before posting. Include as much information as possible: model, machine type, operating system, and a descriptive subject line. Do not include personal information: serial number, telephone number, email address, etc. The fine print: I do not work for, nor do I speak for Lenovo. Unsolicited private messages will be ignored. ... GeezBlog
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество -
As per title. Twice in a few hours. Happened each time when my BT router defaulted to plain public wi-fi and while I waited for airport to locate my router hub I just ticked my hub and boom this dark almost black see through screen slid down and instructed me to switch off using power button. It is a 3 year old desktop 21" and has been faultless until this. I get the default report an unexpected shutdown form and when I fire up it is fine as indeed it is now.
Any help or ideas how to deal with?That is a kernel panic.
What is a Kernel Panic?
http://support.apple.com/kb/TS3742
and http://support.apple.com/kb/TS1892?viewlocale=en_US
http://developer.apple.com/mac/library/technotes/tn2002/tn2063.html
More details here:
http://www.thexlab.com/faqs/kernelpanics.html
Useful articles on how to avoid and eliminate kernel panics here:
http://reviews.cnet.com/8301-13727_7-10344626-263.html?tag=mfiredir
http://www.macworld.com/article/2027201/how-to-troubleshoot-a-kernel-panic.html# tk.nl_mwhelp -
Run Time Error - You attempted to access an unassigned field s
Dear All
I created a report to display purchase order history. there is no syntax error.but runtime which i have pasted below.
help me to find the error.
Runtime Errors GETWA_NOT_ASSIGNED
Date and Time 26.02.2008 06:25:56
Short text
Field symbol has not yet been assigned.
Error analysis
You attempted to access an unassigned field s
(data segment 32820).
This error may occur if
- You address a typed field symbol before it
ASSIGN
- You address a field symbol that pointed to
internal table that was deleted
- You address a field symbol that was previou
UNASSIGN or that pointed to a local field t
longer exists
- You address a global function interface, al
respective function module is not active -
not in the list of active calls. The list o
can be taken from this short dump.
Trigger Location of Runtime Error
Program SAPLSLVC
Include LSLVCF36
Row 3.176
Module type (FORM)
Module Name FILL_DATA_TABLE
Source Code Extract
Line SourceCde
3146 alv_style_align_center_top.
3147 endif.
3148
3149 append ls_lvc_data to ct_lvc_data.
3150 endif.
3151
3152 ************************************
3153 * Column per Fieldcat Entry
3154 ************************************
3155 loop at it_fcat_local assigning <ls_fcat>.
3156 clear: ls_lvc_data-href_hndl,
3157 ls_lvc_data-drdn_hndl,
3157 ls_lvc_data-drdn_hndl,
3158 ls_lvc_data-style,
3159 ls_lvc_data-style2,
3160 ls_lvc_data-style3,
3161 ls_lvc_data-style4,
3162 ls_lvc_data-maxlen.
3163
3164 clear: lt_color_lvc, lt_color_slis.
3165
3166 add 1 to ls_lvc_data-col_pos.
3167
3168 if not <ls_fcat>-indx_field is initial.
3169 assign component <ls_fcat>-indx_field
3170 of structure <ls_data> to <l_field_value>.
3171 else.
3172 assign component <ls_fcat>-fieldname
3173 of structure <ls_data> to <l_field_value>.
3174 endif.
3175
>>>> macro_cell_data_get
3177 <ls_fcat>
3178 <ls_data>
3179 <l_field_value>
3180 ls_lvc_data-value.
3181
3182 *>>> new API
3183 if ir_salv_adapter is bound.
3184 clear ls_lvc_data-style.
3185
3186 * color
3187 if g_gui_type ne 1.
3188 if <ls_fcat>-key eq abap_true.
3189 ls_lvc_data-style = alv_style_color_int_key.
3190 elseif l_style_color is initial
3191 and ( <ls_fcat>-emphasize is initial or
3192 <ls_fcat>-emphasize = '$' ).
3193 if <ls_stin>-counter is initial.
3194 ls_lvc_data-style = alv_style_color_normal.
3195 else.Hi
You are getting the dump because you have not populated the field catalog properly. There will be some mistake in the structure which you are using. Kindly check the same.
THanks
Vijay
<REMOVED BY MODERATOR>
Edited by: Alvaro Tejada Galindo on Feb 26, 2008 12:41 PM -
RUn time error while saving po Field symbol has not yet been assigned.
Hi Experts,
I am getting abap dump while saving PO in ME21N plz seee the below dump plzzzzzzzzzzzzzzzzzzzzz help me
Runtime Errors GETWA_NOT_ASSIGNED
Date and Time 19.06.2009 11:24:46
Short dump has not been completely stored (too big)
Short text
Field symbol has not yet been assigned.
What happened?
Error in the ABAP Application Program
The current ABAP program "SAPLKKBL" had to be terminated because it has
come across a statement that unfortunately cannot be executed.
What can you do?
Note down which actions and inputs caused the error.
To process the problem further, contact you SAP system
administrator.
Using Transaction ST22 for ABAP Dump Analysis, you can look
at and manage termination messages, and you can also
keep them for a long time.
Error analysis
You attempted to access an unassigned field symbol
(data segment 106).
This error may occur if
- You address a typed field symbol before it has been set with
ASSIGN
- You address a field symbol that pointed to the line of an
internal table that was deleted
- You address a field symbol that was previously reset using
UNASSIGN or that pointed to a local field that no
longer exists
- You address a global function interface, although the
respective function module is not active - that is, is
not in the list of active calls. The list of active calls
can be taken from this short dump.
How to correct the error
If the error occures in a non-modified SAP program, you may be able to
find an interim solution in an SAP Note.
If you have access to SAP Notes, carry out a search with the following
keywords:
"GETWA_NOT_ASSIGNED" " "
"SAPLKKBL" or "LKKBLF99"
"GEN_FIELD_OUT2"
If you cannot solve the problem yourself and want to send an error
notification to SAP, include the following information:
1. The description of the current problem (short dump)
To save the description, choose "System->List->Save->Local File
(Unconverted)".
2. Corresponding system log
Display the system log by calling transaction SM21.
Restrict the time interval to 10 minutes before and five minutes
after the short dump. Then choose "System->List->Save->Local File
(Unconverted)".
3. If the problem occurs in a problem of your own or a modified SAP
program: The source code of the program
In the editor, choose "Utilities->More
Utilities->Upload/Download->Download".
4. Details about the conditions under which the error occurred or which
actions and input led to the error.
em environment
SAP-Release 700
Application server... "gplqty"
Network address...... "128.12.0.19"
Operating system..... "Windows NT"
Release.............. "5.2"
Hardware type........ "8x AMD64 Level"
Character length.... 16 Bits
Pointer length....... 64 Bits
Work process number.. 0
Shortdump setting.... "full"
Database server... "GPLQTY"
Database type..... "MSSQL"
Database name..... "GPQ"
Database user ID.. "gpq"
Char.set.... "C"
SAP kernel....... 700
created (date)... "Aug 4 2008 02:33:25"
create on........ "NT 5.2 3790 Service Pack 1 x86 MS VC++ 14.00"
Database version. "SQL_Server_8.00 "
Patch level. 172
Patch text.. " "
Database............. "MSSQL 7.00.699 or higher, MSSQL 8.00.194"
SAP database version. 700
Operating system..... "Windows NT 5.0, Windows NT 5.1, Windows NT 5.2, Windows
NT 6.0"
Memory consumption
Roll.... 16192
EM...... 16759360
Heap.... 0
Page.... 237568
MM Used. 12036016
MM Free. 530432
er and Transaction
Client.............. 410
User................ "SAP_SUPPORT"
Language key........ "E"
Transaction......... "ME21N "
Transactions ID..... "9E955CDE97CBF1648B4C001A64C7B85A"
Program............. "SAPLKKBL"
Screen.............. "SAPLKKBL 0500"
Screen line......... 3
Information on where terminated
Termination occurred in the ABAP program "SAPLKKBL" - in "GEN_FIELD_OUT2".
The main program was "RM_MEPO_GUI ".
In the source code you have the termination point in line 2908
of the (Include) program "LKKBLF99".
Source Code Extract
Line SourceCde
2878 else.
2879 assign <fs11> to <field>.
2880 gs_fc = gs_sfc11.
2881 endif.
2882 when 012.
2883 if gs_out_flags-slave ne 'X'.
2884 assign <fm12> to <field>.
2885 gs_fc = gs_mfc12.
2886 else.
2887 assign <fs12> to <field>.
2888 gs_fc = gs_sfc12.
2889 endif.
2890 when 013.
2891 if gs_out_flags-slave ne 'X'.
2892 assign <fm13> to <field>.
2893 gs_fc = gs_mfc13.
2894 else.
2895 assign <fs13> to <field>.
2896 gs_fc = gs_sfc13.
2897 endif.
2898 when 014.
2899 if gs_out_flags-slave ne 'X'.Hi,
this error occurs when you try to address a field-symbol before it has been assigned to a field or
the assignment has failed.
Use following code to remove this dump
Assign <mara-matnr> to <fs>.
if sy-subrc <> 0.
Error Message.
Endif.
Hope it helps,
Raj -
T-code MDBT runtime error GETWA_NOT_ASSIGNED
Hell everyone.
I copied a client from another client,then I runned MRP in the new client by T-code MDBT.
It happened an error.
Can anybody tell me how I can reslove this issue?
Thanks & Best regards!
The detail error as below:
Runtime Errors GETWA_NOT_ASSIGNED
Date and Time 2010.06.19 11:01:46
Kurztext
Field symbol has not yet been assigned.
发生了什么?
Error in ABAP application program.
The current ABAP program "FCR05205" had to be terminated because one of the
statements could not be executed.
This is probably due to an error in the ABAP program.
你能做什么?
Print out the error message (using the "Print" function)
and make a note of the actions and input that caused the
error.
To resolve the problem, contact your SAP system administrator.
You can use transaction ST22 (ABAP Dump Analysis) to view and administer
termination messages, especially those beyond their normal deletion
date.
is especially useful if you want to keep a particular message.
错误分析
You attempted to access an unassigned field symbol
(data segment 11).
This error may occur for any of the following reasons:
- You address a typed field symbol before it is set using ASSIGN
- You address a field symbol that points to a line in an internal table
that has been deleted
- You address a field symbol that had previously been reset using
UNASSIGN, or that pointed to a local field that no longer exists
- You address a global function interface parameter, even
though the relevant function module is not active,
that is it is not in the list of active calls. You can get the list
of active calls from the this short dump.
如何更正此错误
You may able to find an interim solution to the problem
in the SAP note system. If you have access to the note system your
use the following search criteria:
"GETWA_NOT_ASSIGNED" C
"FCR05205" or "FCR05F00"
"PUT_P_VGWXX"
If you cannot solve the problem yourself and you wish to send
an error message to SAP, include the following documents:
1. A printout of the problem description (short dump)
To obtain this, select in the current display "System->List->
Save->Local File (unconverted)".
2. A suitable printout of the system log
To obtain this, call the system log through transaction SM21.
Limit the time interval to 10 minutes before and 5 minutes
after the short dump. In the display, then select the function
"System->List->Save->Local File (unconverted)".
3. If the programs are your own programs or modified SAP programs,
supply the source code.
To do this, select the Editor function "Further Utilities->
Upload/Download->Download".
4. Details regarding the conditions under which the error occurred
or which actions and input led to the error.
Edited by: lzjsdxg on Jun 19, 2010 6:35 AMAre there anybody can help me?
Thanks! -
Dear All,
During the transaction /n/sapapo/ccr (Reconsilation of transaction data) in client SCP 950, system displays the run time error which are attached herewith.
This is the activity a used to execute regularly (Daily) and first time i recieved this message - -
Runtime Errors ASSERTION_FAILED
Date and Time 13.07.2007 10:13:37
ShrtText
The ASSERT condition has been violated.
What happened?
In the current application program, the system recognized a situation
involving the ASSERT statement that should not occur. A runtime error
occurred, either because there was no activation ID entered or because
the ID of the activation mode used was set to "Cancel.
What can you do?
Print out the error message (using the "Print" function)
and make a note of the actions and input that caused the
error.
To resolve the problem, contact your SAP system administrator.
You can use transaction ST22 (ABAP Dump Analysis) to view and administer
termination messages, especially those beyond their normal deletion
date.
is especially useful if you want to keep a particular message.
Error analysis
The following activation ID was used: "No checkpoint group specified"
If the FIELDS addition was used with this ASSERT statement, the content
of the first 8 fields is as follows:
" (not used) "
" (not used) "
" (not used) "
" (not used) "
" (not used) "
" (not used) "
" (not used) "
" (not used) "
How to correct the error
Probably the only way to eliminate the error is to correct the program.
You may able to find an interim solution to the problem
in the SAP note system. If you have access to the note system yourself,
use the following search criteria:
"ASSERTION_FAILED" C
"/SAPAPO/SAPLTIMESTAMP" or "/SAPAPO/LTIMESTAMPU08"
"/SAPAPO/TIMESTAMP_DIFFERENCE"
If you cannot solve the problem yourself and you wish to send
an error message to SAP, include the following documents:
1. A printout of the problem description (short dump)
To obtain this, select in the current display "System->List->
Save->Local File (unconverted)".
2. A suitable printout of the system log
To obtain this, call the system log through transaction SM21.
Limit the time interval to 10 minutes before and 5 minutes
after the short dump. In the display, then select the function
"System->List->Save->Local File (unconverted)".
3. If the programs are your own programs or modified SAP programs,
supply the source code.
To do this, select the Editor function "Further Utilities->
Upload/Download->Download".
4. Details regarding the conditions under which the error occurred
or which actions and input led to the error.
System environment
SAP Release.............. "640"
Application server....... "scmprd"
Network address.......... "172.16.10.47"
Operating system......... "AIX"
Release.................. "5.3"
Hardware type............ "0002BFAAD700"
Character length......... 16 Bits
Pointer length........... 64 Bits
Work process number...... 0
Short dump setting....... "full"
Database server.......... "scmprd"
Database type............ "ORACLE"
Database name............ "SCP"
Database owner........... "SAPSCP"
Character set............ "C"
SAP kernel............... "640"
Created on............... "Jan 18 2006 20:47:39"
Created in............... "AIX 1 5 00538A4A4C00"
Database version......... "OCI_920 "
Patch level.............. "109"
Patch text............... " "
Supported environment....
Database................. "ORACLE 9.2.0.., ORACLE 10.1.0.., ORACLE
10.2.0.."
SAP database version..... "640"
Operating system......... "AIX 1 5, AIX 2 5, AIX 3 5"
Memory usage.............
Roll..................... 16192
EM....................... 196923232
Heap..................... 0
Page..................... 98304
MM Used.................. 186636840
MM Free.................. 1895288
SAP Release.............. "640"
User and Transaction
Client.............. 950
User................ "SCMATP"
Language key........ "E"
Transaction......... "/SAPAPO/CCR "
Program............. "/SAPAPO/SAPLTIMESTAMP"
Screen.............. "SAPMSSY0 1000"
Screen line......... 6
Information on where terminated
The termination occurred in the ABAP program "/SAPAPO/SAPLTIMESTAMP" in
"/SAPAPO/TIMESTAMP_DIFFERENCE".
The main program was "/SAPAPO/CIF_DELTAREPORT3 ".
The termination occurred in line 61 of the source code of the (Include)
program "/SAPAPO/LTIMESTAMPU08"
of the source code of program "/SAPAPO/LTIMESTAMPU08" (when calling the editor
610).
Source Code Extract
Line SourceCde
31 lv_time_int_low TYPE i,
32 lv_timediff_int TYPE i,
33 lv_datediff_int TYPE i,
34 lv_time TYPE t,
35 ls_time TYPE tstr_timestr.
36
37 * check timestamp parameter
38 * ASSERT NOT iv_timestamp_high IS INITIAL.
39 * ASSERT NOT iv_timestamp_low IS INITIAL.
40 * ASSERT iv_timestamp_low <= iv_timestamp_high.
41 IF iv_timestamp_high IS INITIAL
42 OR iv_timestamp_low IS INITIAL.
43 RAISE invalid_parameter.
44 ENDIF.
45 IF iv_timestamp_high < iv_timestamp_low.
46 RAISE invalid_parameter.
47 ENDIF.
48
49 * prepare timestamps
50 * .. split into date and time integers
51 ls_timestamp_high = iv_timestamp_high.
52 lv_date_int_high = ls_timestamp_high-date.
53 lv_time_int_high = ls_timestamp_high-time.
54 ls_timestamp_low = iv_timestamp_low.
55 lv_date_int_low = ls_timestamp_low-date.
56 lv_time_int_low = ls_timestamp_low-time.
57
58 * .. calc date diff
59 * .. check against max. allowed integer difference
60 lv_datediff_int = lv_date_int_high - lv_date_int_low.
>>>>> ASSERT lv_datediff_int <= lc_datediff_intmax.
62
63 * calc time diff
64 lv_timediff_int = lv_time_int_high - lv_time_int_low.
65 IF lv_timediff_int < 0.
66 ADD 86400 TO lv_timediff_int.
67 SUBTRACT 1 FROM lv_datediff_int.
68 ENDIF.
69
70 * calc total duration
71 lv_duration_int = lv_datediff_int * 86400 + lv_timediff_int.
72 lv_time = lv_timediff_int.
73 ls_time = lv_time.
74 ls_duration-hours = lv_duration_int DIV 3600.
75 ls_duration-minutes = ls_time-minute.
76 ls_duration-seconds = ls_time-second.
77
78 ev_duration_packed = ls_duration.
79 ev_duration_integer = lv_duration_int.
80 ENDFUNCTION.
Contents of system fields
Name Val.
SY-SUBRC 0
SY-INDEX 0
SY-TABIX 1
SY-DBCNT 1
SY-FDPOS 6
SY-LSIND 0
SY-PAGNO 0
SY-LINNO 1
SY-COLNO 1
SY-PFKEY
SY-UCOMM
SY-TITLE CIF - Comparison/Reconciliation of Transaction Data
SY-MSGTY
SY-MSGID
SY-MSGNO 000
SY-MSGV1
SY-MSGV2
SY-MSGV3
SY-MSGV4
Active Calls/Events
No. Ty. Program Include Line
Name
5 FUNCTION /SAPAPO/SAPLTIMESTAMP /SAPAPO/LTIMESTAMPU08 61
/SAPAPO/TIMESTAMP_DIFFERENCE
4 FORM /SAPAPO/SAPLCIF_DELTA3 /SAPAPO/LCIF_DELTA3F17 349
COMPARE_ORDER_HEADER
3 FUNCTION /SAPAPO/SAPLCIF_DELTA3 /SAPAPO/LCIF_DELTA3U03 125
/SAPAPO/CIF_DELTA3_COMP_ORDER
2 FUNCTION /SAPAPO/SAPLCIF_DELTA3 /SAPAPO/LCIF_DELTA3U01 871
/SAPAPO/CIF_DELTA3_COMP
1 EVENT /SAPAPO/CIF_DELTAREPORT3 /SAPAPO/CIF_DELTAREPORT3 189
START-OF-SELECTION
Chosen variables
Name
Val.
No. 5 Ty. FUNCTION
Name /SAPAPO/TIMESTAMP_DIFFERENCE
IV_TIMESTAMP_HIGH
#q1###
02073899
2001125C
IV_TIMESTAMP_LOW
##q!####
00720899
2011125C
EV_DURATION_INTEGER
0
0000
0000
EV_DURATION_PACKED
000000
00000C
SYST-REPID
/SAPAPO/SAPLTIMESTAMP
0000000000000000000000000000000000000000
0000000000000000000000000000000000000000
2545454254545444554452222222222222222222
F31010FF310C49D5341D00000000000000000000
%_SPACE
0
0
2
0
LS_TIMESTAMP_HIGH
22000713182959
00000000000000
00000000000000
33333333333333
22000713182959
LV_DATE_INT_HIGH
803363
0042
0C23
LS_TIMESTAMP_HIGH-DATE
22000713
00000000
00000000
33333333
22000713
LV_TIME_INT_HIGH
66599
0002
0147
LS_TIMESTAMP_HIGH-TIME
182959
000000
000000
333333
182959
LS_TIMESTAMP_LOW
20071210182959
00000000000000
00000000000000
33333333333333
20071210182959
LV_DATE_INT_LOW
733021
0025
0BFD
LS_TIMESTAMP_LOW-DATE
20071210
00000000
00000000
33333333
20071210
LV_TIME_INT_LOW
66599
0002
0147
LS_TIMESTAMP_LOW-TIME
182959
000000
000000
333333
182959
SY-UNAME
SCMATP
000000000000
000000000000
544455222222
33D140000000
SCREEN-INPUT
1
0
0
3
1
LV_DATEDIFF_INT
70342
001C
0126
LV_TIMEDIFF_INT
0
0000
0000
SYST
#######################################Ō###############################################䵘 C#Ԁ##
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000004000000
000000000000000000000000000000000000000100000000000000000000000000000000000000000000000D000500
0000000000000000000000000000000800000004000000000000000000000000000000000000010900000005240000
0000010200000000000001060100010C0000000C0000000002000000000000000000000000000B000001000803000C
SY-REPID
/SAPAPO/SAPLTIMESTAMP
0000000000000000000000000000000000000000
0000000000000000000000000000000000000000
2545454254545444554452222222222222222222
F31010FF310C49D5341D00000000000000000000
%_DUMMY$$
0000
0000
2222
0000
No. 4 Ty. FORM
Name COMPARE_ORDER_HEADER
SYST-REPID
/SAPAPO/SAPLCIF_DELTA3
0000000000000000000000000000000000000000
0000000000000000000000000000000000000000
2545454254544445444543222222222222222222
F31010FF310C396F45C413000000000000000000
GC_APPEND_MODE
3
0
0
3
3
LS_FIELDS_TO_COMPARE-DUEDATE
X
0
0
5
8
SYST
#######################################Ō###############################################䵘 C#Ԁ##
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000004000000
000000000000000000000000000000000000000100000000000000000000000000000000000000000000000D000500
0000000000000000000000000000000800000004000000000000000000000000000000000000010900000005240000
0000010200000000000001060100010C0000000C0000000002000000000000000000000000000B000001000803000C
LS_APO_ORDER-ORDTYPE
5
0
0
3
5
GC_PLANNED_ORDER
5
0
0
3
5
LS_R3_ORDER-STATUSCNF
0
0
2
0
GC_ORDER_STATUS_NO_CONF
1
0
0
3
1
LS_APO_ORDER-STATUSCNF
0
0
2
0
GC_PRED_OUT_DEL
A
0
0
4
1
GC_TND_DELETE
CN
00
00
44
3EDear Sajit,
Go through the following OSS Notes:
<a href="https://websmp110.sap-ag.de/form/handler?_APP=01100107900000000342&_EVENT=REDIR&_NNUM=901957&_NLANG=E">901957</a>, <a href="https://websmp110.sap-ag.de/form/handler?_APP=01100107900000000342&_EVENT=REDIR&_NNUM=1036880&_NLANG=E">1036880</a>, <a href="https://websmp110.sap-ag.de/~form/handler?_APP=01100107900000000342&_EVENT=REDIR&_NNUM=1067414&_NLANG=E">1067414</a>
Regards,
Naveen. -
Run time error while login to RTF Template
Hi,
I am trying to create a sample report in BI Publisher. but while login into RTF Template I am getting below error.
Please rectify this problem?
Run time error '429'
Active x component can't ceate object
help me outRuntime Errors DYNPRO_FIELD_CONVERSION
Date and Time 07.05.2010 08:49:15
ShrtText
A conversion error occurred.
What happened?
The current screen processing was terminated, since a situation
occurred from which it could not continue processing.
This is probably due to an error in the current screen of the ABAP
program.
What can you do?
Make a note of the actions and input which caused the error.
To resolve the problem, contact your SAP system administrator.
You can use transaction ST22 (ABAP Dump Analysis) to view and administe
termination messages, especially those beyond their normal deletion
date.
Error analysis
The program flow was interrupted and could not be resumed.
Program "SAPMJ1IFN" tried to display fields on screen 1210. However, an
error occurred while this data was being converted. -
While doing SO, im getting run time error - reg;
Hi,
While doing sales order and whenever im doing save its getting runtime error.
Runtime Errors MESSAGE_TYPE_X
Date and Time 14.12.2011 10:55:26
Short dump has not been completely stored (too big)
Short text
The current application triggered a termination with a short dump.
What happened?
The current application program detected a situation which really
should not occur. Therefore, a termination with a short dump was
triggered on purpose by the key word MESSAGE (type X).
What can you do?
Note down which actions and inputs caused the error.
To process the problem further, contact you SAP system
administrator.
Using Transaction ST22 for ABAP Dump Analysis, you can look
at and manage termination messages, and you can also
keep them for a long time.
Error analysis
Short text of error message:
Maintain the current CRM release (table CRMPAROLTP)
Long text of error message:
Diagnosis
Various transfer errors occur when transferring SAP sales orders to
CRM or there is no status update or the status update has errors
when transferring from CRM to the SAP system. This is caused by an
incorrect entry for the CRM release in the SAP table CRMPAROLTP, or
no entry is maintained at all.
System Response
To avoid data inconsistencies, this message causes a short dump.
Procedure
Maintain table CRMPAROLTP in your SAP system as is described in SAP
Note 691710 and then repeat the process again.
Procedure for System Administration
Technical information about the message:
Message class....... "V3"
Number.............. 302
Variable 1.......... " "
Variable 2.......... " "
Variable 3.......... " "
Variable 4.......... " "
How to correct the error
Probably the only way to eliminate the error is to correct the program.
If the error occures in a non-modified SAP program, you may be able to
find an interim solution in an SAP Note.
Runtime Errors MESSAGE_TYPE_X
Date and Time 14.12.2011 10:55:26
hort dump has not been completely stored (too big)
If you have access to SAP Notes, carry out a search with the following
keywords:
"MESSAGE_TYPE_X" " "
"SAPMV45A" or "MV45AF0B_BAPIDATEN_ERMITTELN"
"BAPIDATEN_ERMITTELN"
If you cannot solve the problem yourself and want to send an error
notification to SAP, include the following information:
1. The description of the current problem (short dump)
To save the description, choose "System->List->Save->Local File
(Unconverted)".
2. Corresponding system log
Display the system log by calling transaction SM21.
Restrict the time interval to 10 minutes before and five minutes
after the short dump. Then choose "System->List->Save->Local File
(Unconverted)".
3. If the problem occurs in a problem of your own or a modified SAP
program: The source code of the program
In the editor, choose "Utilities->More
Utilities->Upload/Download->Download".
4. Details about the conditions under which the error occurred or which
actions and input led to the error.
System environment
SAP-Release 700
Application server... "personal"
Network address...... "192.168.2.11"
Operating system..... "Windows NT"
Release.............. "5.2"
Hardware type........ "4x Intel 80686"
Character length.... 16 Bits
Pointer length....... 32 Bits
Work process number.. 1
Shortdump setting.... "full"
Database server... "PERSONAL"
Database type..... "ORACLE"
Database name..... "GCU"
Database user ID.. "SAPSR3"
Char.set.... "C"
SAP kernel....... 700
created (date)... "Aug 29 2006 00:18:21"
create on........ "NT 5.0 2195 Service Pack 4 x86 MS VC++ 13.10"
Database version. "OCI_10201_SHARE (10.2.0.1.0) "
Patch level. 75
Patch text.. " "
Runtime Errors MESSAGE_TYPE_X
Date and Time 14.12.2011 10:55:26
hort dump has not been completely stored (too big)
Database............. "ORACLE 9.2.0.., ORACLE 10.1.0.., ORACLE 10.2.0.."
SAP database version. 700
Operating system..... "Windows NT 5.0, Windows NT 5.1, Windows NT 5.2"
Memory consumption
Roll.... 8176
EM...... 30311496
Heap.... 0
Page.... 139264
MM Used. 14538320
MM Free. 91952
User and Transaction
Client.............. 100
User................ "INFO_SD"
Language key........ "E"
Transaction......... "VA01 "
Program............. "SAPMV45A"
Screen.............. "SAPMV45A 4001"
Screen line......... 65
Information on where terminated
Termination occurred in the ABAP program "SAPMV45A" - in "BAPIDATEN_ERMITTELN".
The main program was "SAPMV45A ".
In the source code you have the termination point in line 338
of the (Include) program "MV45AF0B_BAPIDATEN_ERMITTELN".
Edited by: kiran35086 on Dec 14, 2011 6:30 AMDear kiran,
This might be many reasons.If you have not done configuration properly system will take you to dump(Run time error).
Try read the diagnosis possibly you may understand the problem.
If not You coordinate with your technical team.
Thanks&Regards
Raghu.k -
Hi Friends,
My user has run F110 payment program
payment proposal and payment run also created. open vendor invoices also cleared with cleared doucments. But Run Time ABAP Error occured. the job was cancelled.
the bank payments are not happend. below description is the Error analysis.
Runtime Errors CONVT_NO_NUMBER
Date and Time 17.02.2009 09:27:31
Short text
Unable to interpret "CSE " as a number.
What happened?
Error in the ABAP Application Program
The current ABAP program "SAPLFPAYM_NO" had to be terminated because it has
come across a statement that unfortunately cannot be executed.
What can you do?
Note down which actions and inputs caused the error.
To process the problem further, contact you SAP system
administrator.
Using Transaction ST22 for ABAP Dump Analysis, you can look
at and manage termination messages, and you can also
keep them for a long time.
Error analysis
An exception occurred that is explained in detail below.
This exception cannot be caught in the context of the current statement.
The reason for the exception is:
The program attempted to interpret the value "CSE " as a number, but
since the value contravenes the rules for correct number formats,
this was not possible.
How to correct the error
Whole numbers are represented in ABAP as a sequence of numbers, poss
with an algebraic sign.
The following are the possibilities for the representation of floati
point numbers:
[algebraic sign][mantissa]E[algebraic sign][exponent]
[algebraic sign][whole number part].[fraction part]
For example, -12E+34, +12E-34, 12E34, 12.34
If the error occurred in your own ABAP program or in an SAP
program you modified, try to remove the error.
If the error occures in a non-modified SAP program, you may be able
find an interim solution in an SAP Note.
If you have access to SAP Notes, carry out a search with the followi
keywords:
"CONVT_NO_NUMBER" " "
"SAPLFPAYM_NO" or "LFPAYM_NOU01"
"FI_PAYMEDIUM_DMEE_PAYMULNO_05"
If you cannot solve the problem yourself and want to send an error
notification to SAP, include the following information:
1. The description of the current problem (short dump)
To save the description, choose "System->List->Save->Local File
(Unconverted)".
2. Corresponding system log
please give me some inputs, should I suggest to user to reset the clear invoices and run again the
F110.
Points will be awarded.hi
ru using any kind of BAPi here
check following
/message/3794598#3794598 [original link is broken]
Re: Sdccn Runtime error CONVT_NO_NUMBER
plz do the analysis in ST22 with ur ABAper
regards
KI -
Run-time error "CONVERSION_CODEPAGE_UNKNOWN" occurred in BW SapNetweaver.
Today I have problem with this error dump: Run-time error "CONVERSION_CODEPAGE_UNKNOWN"
I got this problem from rspc chain manager but also from another place as place a filter on table VARI.
I suspect that this include "IMPORT_VARIANT_STATIC" got problem of the (Include)
program "RSDBSPVD".
This is first time that I got this error.
I think problem was linked to VARI tables and include IMPORT_VARIANT_STATIC in this program RSDBSPVD
Runtime Errors CONVERSION_CODEPAGE_UNKNOWN
Date and Time 03.06.2008 14:27:46
|Short text
| Unable to convert from code page ' ' to code page '4103'. |What happened?
Error in the ABAP Application Program
The current ABAP program "RSDBSPVD" had to be terminated because it has
come across a statement that unfortunately cannot be executed.
What can you do?
Note down which actions and inputs caused the error.
To process the problem further, contact you SAP system
administrator.
Using Transaction ST22 for ABAP Dump Analysis, you can look
at and manage termination messages, and you can also
keep them for a long time.
Error analysis
One of your chosen conversion tables (CODE PAGE) ' ' or '4103'
is unknown to the system.
For a list of conversion tables known to the system, see table
| TCP00. To display this, use Transaction SPAD.
Active Calls/Events
No. Ty. Program Include Line
Name
4 FORM RSDBSPVD RSDBSPVD 119
IMPORT_VARIANT_STATIC
3 FORM SAPLSVAR LSVARF07 522
IMPORT_VAR_SELC
2 FUNCTION SAPLSVAR LSVARU07 80
RS_VARIANT_CONTENTS
1 EVENT RS_VARIANT_VALUES RS_VARIANT_VALUES 22
| START-OF-SELECTIONSorry, but my Sap Netweaver 2004s is a build 700.
I'm manually imported this table, before I exported table VARI from an old database of this istance. (db2 dart /ddel 'table space number' 'table id number')
log about vari import table:
SQL3501W The table space(s) in which the table resides will not be placed in
backup pending state since forward recovery is disabled for the database.
SQL3109N The utility is beginning to load data from file
"D:db2BW2db2dumpDART000025".
SQL3500W The utility is beginning the "LOAD" phase at time "05/29/2008
18:56:04.266758".
SQL3519W Begin Load Consistency Point. Input record count = "0".
SQL3520W Load Consistency Point was successful.
SQL3114W Some data following """" in row "F0-1242" and column "10" was not
loaded.
SQL3114W Some data following """" in row "F0-1243" and column "10" was not
loaded.
SQL3227W Record token "F0-1242" refers to user record number "6536".
SQL3227W Record token "F0-1243" refers to user record number "6537".
SQL3114W Some data following """" in row "F0-1958" and column "10" was not
loaded.
SQL3114W Some data following """" in row "F0-1959" and column "10" was not
loaded.
SQL3114W Some data following "u0178õ o½@: s]ªÂÅúõB'r" in row "F0-1959" and
column "11" was not loaded.
SQL3114W Some data following """" in row "F0-1969" and column "10" was not
loaded.
SQL3114W Some data following """" in row "F0-1974" and column "10" was not
loaded.
SQL3114W Some data following """" in row "F1-1634" and column "10" was not
loaded.
SQL3114W Some data following """" in row "F1-1981" and column "10" was not
loaded.
SQL3114W Some data following """" in row "F1-1982" and column "10" was not
loaded.
SQL3114W Some data following """" in row "F1-1983" and column "10" was not
loaded.
SQL3114W Some data following """" in row "F1-1995" and column "10" was not
loaded.
SQL3114W Some data following """" in row "F1-1996" and column "10" was not
loaded.
SQL3114W Some data following """" in row "F1-1998" and column "10" was not
loaded.
SQL3114W Some data following """" in row "F1-2009" and column "10" was not
loaded.
SQL3114W Some data following """" in row "F1-2010" and column "10" was not
loaded.
SQL3114W Some data following "u0178õ o½@: s]ªÂÅúõB'r" in row "F1-2010" and
column "11" was not loaded.
SQL3114W Some data following """" in row "F1-2012" and column "10" was not
loaded.
SQL3114W Some data following """" in row "F1-2023" and column "10" was not
loaded.
SQL3114W Some data following """" in row "F1-2026" and column "10" was not
loaded.
SQL3114W Some data following """" in row "F1-2037" and column "10" was not
loaded.
SQL3114W Some data following """" in row "F1-2040" and column "10" was not
loaded.
SQL3114W Some data following """" in row "F1-2051" and column "10" was not
loaded.
SQL3114W Some data following """" in row "F1-2052" and column "10" was not
loaded.
SQL3114W Some data following "u0178õ o½@: s]ªÂÅúõB'r" in row "F1-2052" and
column "11" was not loaded.
SQL3114W Some data following """" in row "F1-2054" and column "10" was not
loaded.
SQL3114W Some data following """" in row "F1-2065" and column "10" was not
loaded.
SQL3114W Some data following """" in row "F1-2066" and column "10" was not
loaded.
SQL3114W Some data following """" in row "F1-2068" and column "10" was not
loaded.
SQL3114W Some data following """" in row "F1-2079" and column "10" was not
loaded.
SQL3114W Some data following """" in row "F1-2082" and column "10" was not
loaded.
SQL3114W Some data following """" in row "F0-2240" and column "10" was not
loaded.
SQL3114W Some data following """" in row "F0-2243" and column "10" was not
loaded.
SQL3114W Some data following """" in row "F0-2253" and column "10" was not
loaded.
SQL3114W Some data following """" in row "F0-2254" and column "10" was not
loaded.
SQL3114W Some data following """" in row "F0-2255" and column "10" was not
loaded.
SQL3114W Some data following """" in row "F0-2266" and column "10" was not
loaded.
SQL3114W Some data following """" in row "F0-2267" and column "10" was not
loaded.
SQL3114W Some data following """" in row "F0-2269" and column "10" was not
loaded.
SQL3114W Some data following """" in row "F0-2280" and column "10" was not
loaded.
SQL3114W Some data following """" in row "F0-2281" and column "10" was not
loaded.
SQL3114W Some data following """" in row "F0-2282" and column "10" was not
loaded.
SQL3227W Record token "F0-1958" refers to user record number "11636".
SQL3227W Record token "F0-1959" refers to user record number "11637".
SQL3227W Record token "F0-1969" refers to user record number "11647".
SQL3227W Record token "F0-1974" refers to user record number "11652".
SQL3227W Record token "F1-1634" refers to user record number "11661".
SQL3227W Record token "F0-2240" refers to user record number "14014".
SQL3227W Record token "F0-2243" refers to user record number "14017".
SQL3227W Record token "F0-2253" refers to user record number "14027".
SQL3227W Record token "F0-2254" refers to user record number "14028".
SQL3227W Record token "F0-2255" refers to user record number "14029".
SQL3227W Record token "F0-2266" refers to user record number "14040".
SQL3227W Record token "F0-2267" refers to user record number "14041".
SQL3227W Record token "F0-2269" refers to user record number "14043".
SQL3227W Record token "F0-2280" refers to user record number "14054".
SQL3227W Record token "F0-2281" refers to user record number "14055".
SQL3227W Record token "F0-2282" refers to user record number "14056".
SQL3227W Record token "F1-1981" refers to user record number "14068".
SQL3227W Record token "F1-1982" refers to user record number "14069".
SQL3227W Record token "F1-1983" refers to user record number "14070".
SQL3227W Record token "F1-1995" refers to user record number "14082".
SQL3227W Record token "F1-1996" refers to user record number "14083".
SQL3227W Record token "F1-1998" refers to user record number "14085".
SQL3227W Record token "F1-2009" refers to user record number "14096".
SQL3227W Record token "F1-2010" refers to user record number "14097".
SQL3227W Record token "F1-2012" refers to user record number "14099".
SQL3227W Record token "F1-2023" refers to user record number "14110".
SQL3227W Record token "F1-2026" refers to user record number "14113".
SQL3227W Record token "F1-2037" refers to user record number "14124".
SQL3227W Record token "F1-2040" refers to user record number "14127".
SQL3227W Record token "F1-2051" refers to user record number "14138".
SQL3227W Record token "F1-2052" refers to user record number "14139".
SQL3227W Record token "F1-2054" refers to user record number "14141".
SQL3227W Record token "F1-2065" refers to user record number "14152".
SQL3227W Record token "F1-2066" refers to user record number "14153".
SQL3227W Record token "F1-2068" refers to user record number "14155".
SQL3227W Record token "F1-2079" refers to user record number "14166".
SQL3227W Record token "F1-2082" refers to user record number "14169".
SQL3114W Some data following """" in row "F1-9602" and column "10" was not
loaded.
SQL3114W Some data following """" in row "F1-9603" and column "10" was not
loaded.
SQL3114W Some data following "u0178õ o½@: s]ªÂÅúõB'r" in row "F1-9603" and
column "11" was not loaded.
SQL3114W Some data following """" in row "F1-9612" and column "10" was not
loaded.
SQL3114W Some data following """" in row "F2-9374" and column "10" was not
loaded.
SQL3114W Some data following """" in row "F2-9375" and column "10" was not
loaded.
SQL3114W Some data following """" in row "F2-9383" and column "10" was not
loaded.
SQL3114W Some data following """" in row "F2-9397" and column "10" was not
loaded.
SQL3114W Some data following """" in row "F2-9410" and column "10" was not
loaded.
SQL3227W Record token "F1-9602" refers to user record number "66049".
SQL3227W Record token "F1-9603" refers to user record number "66050".
SQL3227W Record token "F1-9612" refers to user record number "66059".
SQL3227W Record token "F2-9374" refers to user record number "66063".
SQL3227W Record token "F2-9375" refers to user record number "66064".
SQL3227W Record token "F2-9383" refers to user record number "66072".
SQL3227W Record token "F2-9397" refers to user record number "66086".
SQL3227W Record token "F2-9410" refers to user record number "66099".
SQL3114W Some data following """" in row "F2-11966" and column "10" was not
loaded.
SQL3114W Some data following """" in row "F2-11969" and column "10" was not
loaded.
SQL3114W Some data following """" in row "F2-12580" and column "10" was not
loaded.
SQL3114W Some data following """" in row "F2-12581" and column "10" was not
loaded.
SQL3114W Some data following """" in row "F3-12270" and column "10" was not
loaded.
SQL3114W Some data following """" in row "F3-12273" and column "10" was not
loaded.
SQL3114W Some data following """" in row "F3-12274" and column "10" was not
loaded.
SQL3114W Some data following """" in row "F3-12283" and column "10" was not
loaded.
SQL3114W Some data following """" in row "F3-12286" and column "10" was not
loaded.
SQL3114W Some data following """" in row "F3-12287" and column "10" was not
loaded.
SQL3114W Some data following """" in row "F3-12295" and column "10" was not
loaded.
SQL3114W Some data following """" in row "F3-12299" and column "10" was not
loaded.
SQL3114W Some data following """" in row "F3-12300" and column "10" was not
loaded.
SQL3114W Some data following """" in row "F3-12308" and column "10" was not
loaded.
SQL3227W Record token "F2-11966" refers to user record number "83492".
SQL3227W Record token "F2-11969" refers to user record number "83495".
SQL3227W Record token "F2-12580" refers to user record number "86221".
SQL3227W Record token "F2-12581" refers to user record number "86222".
SQL3227W Record token "F3-12270" refers to user record number "86232".
SQL3227W Record token "F3-12273" refers to user record number "86235".
SQL3227W Record token "F3-12274" refers to user record number "86236".
SQL3227W Record token "F3-12283" refers to user record number "86245".
SQL3227W Record token "F3-12286" refers to user record number "86248".
SQL3227W Record token "F3-12287" refers to user record number "86249".
SQL3227W Record token "F3-12295" refers to user record number "86257".
SQL3227W Record token "F3-12299" refers to user record number "86261".
SQL3227W Record token "F3-12300" refers to user record number "86262".
SQL3227W Record token "F3-12308" refers to user record number "86270".
SQL3110N The utility has completed processing. "1053698" rows were read from
the input file.
SQL3519W Begin Load Consistency Point. Input record count = "1053698".
SQL3520W Load Consistency Point was successful.
SQL3515W The utility has finished the "LOAD" phase at time "05/29/2008
18:56:18.932604".
SQL3500W The utility is beginning the "BUILD" phase at time "05/29/2008
18:56:18.936928".
SQL3213I The indexing mode is "REBUILD".
SQL3515W The utility has finished the "BUILD" phase at time "05/29/2008
18:56:24.684630".
SQL3107W There is at least one warning message in the message file.
Number of rows read = 1053698
Number of rows skipped = 0
Number of rows loaded = 1053698
Number of rows rejected = 0
Number of rows deleted = 0
Number of rows committed = 1053698
Do you think that convert codepage errore is due to this warning message? -
ABAP Run time Error whle executing the Balance sheet report in FGI0
Hi,
I am getting the below ABAP Run time error while executing the Balance Sheet report in FGI0.It was working before but now it is giving the error.Kindly help me in solving this.
Runtime Errors MESSAGE_TYPE_X
Date and Time 06/12/2009 15:17:17
Short text
The current application triggered a termination with a short dump.
What happened?
The current application program detected a situation which really
should not occur. Therefore, a termination with a short dump was
triggered on purpose by the key word MESSAGE (type X).
Error analysis
Short text of error message:
RAISE RKD_CONDITION_READ (internal error)
Long text of error message:
Diagnosis
The program was terminated because a situation occurred which
should not have arisen.
Procedure
Analyze the situation and contact SAP.
Technical information about the message:
Message class....... "KH"
Number.............. 299
Variable 1.......... "RKD_CONDITION_READ"
Variable 2.......... " "
Variable 3.......... " "
Variable 4.......... " "
Trigger Location of Runtime Error
Program SAPLKYPR
Include LKYPRU31
Row 36
Module type (FUNCTION)
Module Name RKD_CONDITION_READ
Thanks
SupriyaHello,
Please refer SAP
Note 971535 - dump when deleting characteristic with hierarchy
Regards,
Ravi -
We are geting following run time error when executeing QA32 t-code of QM , error as follows ,
Error analysis
After a specific time, the program is terminated to make the work area
available to other users who may be waiting.
This is to prevent a work area being blocked unnecessarily long by, for
example:
- Endless loops (DO, WHILE, ...),
- Database accesses with a large result set
- Database accesses without a suitable index (full table scan)
The maximum runtime of a program is limited by the system profile
parameter "rdisp/max_wprun_time". The current setting is 600 seconds. If this
time limit is
exceeded, the system attempts to cancel any running SQL statement or
signals the ABAP processor to stop the running program. Then the system
waits another 60 seconds maximum. If the program is then still active,
the work process is restarted.
How to correct the error
Programs with long runtime should generally be started as background
jobs. If this is not possible, you can increase the system profile
parameter "rdisp/max_wprun_time".
Depending on the cause of the error, you may have to take one of the
following measures:
- Endless loop: Correct program;
- Dataset resulting from database access is too large:
Instead of "SELECT * ... ENDSELECT", use "SELECT * INTO internal table
(for example);
- Database has unsuitable index: Check index generation.
If the error occures in a non-modified SAP program, you may be able to
find an interim solution in an SAP Note.
Runtime Errors TIME_OUT
Date and Time 30.06.2009 10:17:31
Short dump has not been completely stored (too big)
If you have access to SAP Notes, carry out a search with the following
keywords:
"TIME_OUT" " "
"SAPLBSVA" or "LBSVAU14"
"STATUS_PRE_READ"
If you cannot solve the problem yourself and want to send an error
notification to SAP, include the following information:
1. The description of the current problem (short dump)
To save the description, choose "System->List->Save->Local File
(Unconverted)".
2. Corresponding system log
Display the system log by calling transaction SM21.
Restrict the time interval to 10 minutes before and five minutes
after the short dump. Then choose "System->List->Save->Local File
(Unconverted)".
3. If the problem occurs in a problem of your own or a modified SAP
program: The source code of the program
In the editor, choose "Utilities->More
Utilities->Upload/Download->Download".
4. Details about the conditions under which the error occurred or which
actions and input led to the error.
System environment
SAP-Release 700
Application server... "GALT"
Network address...... "202.54.13.238"
Operating system..... "Windows NT"
Release.............. "5.2"
Hardware type........ "2x Intel 80686"
Character length.... 8 Bits
Pointer length....... 32 Bits
Work process number.. 0
Shortdump setting.... "full"
Database server... "GALT"
Database type..... "ORACLE"
Database name..... "PRD"
Database user ID.. "SAPSR3"
Char.set.... "English_United State"
SAP kernel....... 700
created (date)... "Oct 13 2006 00:08:41"
create on........ "NT 5.0 2195 Service Pack 4 x86 MS VC++ 13.10"
Database version. "OCI_10201_SHARE (10.2.0.1.0) "
Patch level. 80
Patch text.. " "
Runtime Errors TIME_OUT
Date and Time 30.06.2009 10:17:31
Short dump has not been completely stored (too big)
Database............. "ORACLE 9.2.0.., ORACLE 10.1.0.., ORACLE 10.2.0.."
SAP database version. 700
Operating system..... "Windows NT 5.0, Windows NT 5.1, Windows NT 5.2"
Memory consumption
Roll.... 8112
EM...... 16724736
Heap.... 0
Page.... 450560
MM Used. 6688784
MM Free. 626280
User and Transaction
Client.............. 400
User................ "MGMTSER"
Language key........ "E"
Transaction......... "QA11 "
Program............. "SAPLBSVA"
Screen.............. "SAPMQEVA 0200"
Screen line......... 41
Information on where terminated
Termination occurred in the ABAP program "SAPLBSVA" - in "STATUS_PRE_READ".
The main program was "SAPMQEVA ".
In the source code you have the termination point in line 61
of the (Include) program "LBSVAU14".
Source Code Extract
Line SourceCde
31
32 OBJNR_TAB[] = JSTO_PRE_TAB[].
33
34 * Merken: jeweils bisherige Anzahl Einträge im Puffer
35 DESCRIBE TABLE JSTO_BUF LINES JSTO_BUF_LINES.
36 DESCRIBE TABLE JEST_BUF LINES JEST_BUF_LINES.
37 DESCRIBE TABLE OBJNR_TAB LINES OBJNR_TAB_LINES. "Note978655
38 ADD 1 TO JSTO_BUF_LINES.
39
40 l_percentage = OBJNR_TAB_LINES * 100 / JSTO_BUF_LINES. "Note978655
41 * Small number of object numbers to be read, insert records "Note978655
42 * sequentially to avoid expensive SORT on JSTO_BUF,JEST_BUF "Note978655
43 IF ( l_percentage <= 1 OR OBJNR_TAB_LINES < 20 ) AND "Note978655
44 get_change_documents IS INITIAL. "Note978655
45 LOOP AT objnr_tab. "Note978655
46 SELECT * FROM JSTO CLIENT SPECIFIED "Note978655
47 FOR ALL ENTRIES IN OBJNR_TAB "Note978655
48 WHERE MANDT EQ CLIENT "Note978655
49 AND OBJNR = OBJNR_TAB-OBJNR. "Note978655
50 READ TABLE JSTO_BUF WITH KEY MANDT = JSTO-MANDT "Note978655
51 OBJNR = JSTO-OBJNR "Note978655
52 BINARY SEARCH. "Note978655
53 IF SY-SUBRC <> 0. "Note978655
Runtime Errors TIME_OUT
Date and Time 30.06.2009 10:17:31
Short dump has not been completely stored (too big)
54 JSTO_BUF = JSTO. "Note978655
55 CLEAR JSTO_BUF-MOD. "Note978655
56 JSTO_BUF-STSMA_OLD = JSTO_BUF-STSMA. "Note978655
57 INSERT JSTO_BUF INDEX SY-TABIX. "Note978655
58 ENDIF. "Note978655
59 ENDSELECT. "Note978655
60 "Note978655
>>>>> SELECT * FROM JEST CLIENT SPECIFIED "Note978655
62 FOR ALL ENTRIES IN OBJNR_TAB "Note978655
63 WHERE MANDT EQ CLIENT "Note978655
64 AND OBJNR = OBJNR_TAB-OBJNR. "Note978655
65 READ TABLE JEST_BUF WITH KEY MANDT = JEST-MANDT "Note978655
66 OBJNR = JEST-OBJNR "Note978655
67 STAT = JEST-STAT "Note978655
68 BINARY SEARCH. "Note978655
69 IF SY-SUBRC <> 0. "Note978655
70 JEST_BUF = JEST. "Note978655
71 CLEAR JEST_BUF-MOD. "Note978655
72 JEST_BUF-INACT_OLD = JEST_BUF-INACT. "Note978655
73 INSERT JEST_BUF INDEX SY-TABIX. "Note978655
74 ENDIF. "Note978655
75 ENDSELECT. "Note978655
76 ENDLOOP. "Note978655
77 CLEAR: JSTO_BUF,JEST_BUF. "Note978655
78 EXIT. "Note978655
79 ENDIF. "Note978655
80
Contents of system fields
Name Val.
SY-SUBRC0
SY-INDEX0
SY-TABIX15
SY-DBCNT15
SY-FDPOS1
SY-LSIND0
SY-PAGNO0
SY-LINNO1
SY-COLNO1
SY-PFKEYA101
SY-UCOMMBU
SY-TITLE Record Usage Decision: Characteristic Overview
SY-MSGTY
SY-MSGID
SY-MSGNO000
SY-MSGV1
SY-MSGV2
SY-MSGV3
SY-MSGV4
SY-MODNO0
SY-DATUM20090630
SY-UZEIT101723
SY-XPROGSAPLQAMB
SY-XFORMCONVERSION_EXIT
Edited by: Raghavendra Balegar on Jul 3, 2009 12:21 PMNo Dear,
Not at all. I think it should work for atleast one month period.
But sometimes depending on the database size and hardware, this criteria can vary.
Regds,
Anil -
Run Time error : ITS_EXPRESSION_NOT_NUM
Dear Freinds,
When iam changing the Html templates IAC applicaion iam getting run time error as : ITS_EXPRESSION_NOT_NUM
Please find the dump analysis.
Runtime Errors ITS_EXPRESSION_NOT_NUM
Date and Time 04.01.2011 18:21:59
Short text
Template interpretation cancelled, runtime error. <<<<TRAN
What happened?
Template "templates/zhra_appraisal/99/saplzhra_appraisals_1041.html" has
triggered a runtime error in function "unknown".
Cause of error: "0.00 " could not be converted into a numerical value.
What can you do?
Call transaction SE80 and check the HTMLB program.
In SE80 choose 'Internet Service' and navigate to the relevant template.
You can find out the service, theme, and template name from the path of
the erroneous template:
"templates/zhra_appraisal/99/saplzhra_appraisals_1041.html".
Remember to publish the corrected template on the site
'INTERNAL' so that the change is activated.
Note down which actions and inputs caused the error.
To process the problem further, contact you SAP system
administrator.
Using Transaction ST22 for ABAP Dump Analysis, you can look
at and manage termination messages, and you can also
keep them for a long time.
Error analysis
The HTMLB program could not convert the character string "0.00 " into
numerical value. Check that the character string only contains valid
characters.
Could any one please let me knwo what could be the exact error as iam not sure regarding the Java Script.
regards
DivyaHello,
did you find a solution for this problem?
Waleed
Maybe you are looking for
-
Using F-03 and F-04 for Intercompany Postings..
HI Gurus, We have Debit 3000 and credit 3000 balance for Account:202024(Intercompany Manual Postings).. iam trying to auto clear with F-03 its shwoinng error message.. Use: Document Type GC for Intercompany Postings..trying to use with f-04: Doc Type
-
I have trouble creating a pdf portfolio from Outlook: it creates the portfolio, but the result does not have "From" or "Subject" in the index. Please help!
-
Problems with DSLR Footage in CS 5.5
I am using Premiere CS 5.5. I have no trouble editing AVCHD footage, but a new client is giving me footage shot with various DSLR cameras and this is causing me problems. First, my specs. Windows 7 i7-2600 processor GTX 460 card (1 GB memory, 336 CU
-
I am running Mail.app 3.6 on OS X 10.5.8. I have three IMAP mail accounts set up. Last night, Mail.app stopped pulling in new mail. You can click the Get Mail button, it goes and looks (it all looks normal in the Activity Window), and returns with no
-
Hello, I am in need of some assistance if possible. Is there a way of using postfix to archive the email coming in and going out of a single mail user without enabling always_bcc in main.cf? We have many mail users and archiving all email for one use