Receiving zfs snapshots from remote system

Hi guys,
if you create zfs snapshots on systemA and then send them to systemB, how do you recover the snapshots from systemB back to systemA?
Thanks guys .

The same way, just do a send/receive from B to A. But that would create a new filesystem, not get you the snapshot within the original zfs back.
cheers
bjoern

Similar Messages

Receive syslog messages from remote system

I want to replace my ancient and aging Slackware 12.0 server with an Arch server. One of the hurdles is to receive syslog messages (UDP/IP, port 514) over the network from a Cisco 678 DSL modem/router, and from a DD-WRT based wireless access point.
How do I go about getting a systemd-based Arch server to receive syslog-formatted messages from the network on UDP port 514?
I'm not looking to view the Arch system's journal over the network, but rather to receive non-local messages and log them.
Last edited by bediger4000 (2013-08-01 15:44:48)

WonderWoofy: I hope you mean "man systemd-journal-gatewayd", as I find that man page, but not "systemd-journal-gateway". systemd-journal-gatewayd works the other way. According to the man page it "serves journal events over the network. Clients must connect using HTTP."
sbmomeni: I agree that your reference says the systemd journal provides the same function - but how? And does "this functionality" refer to the logging part of syslog-ng, or to the receiving messages from other machines part?

SQL from remote systems failes

Hi All,
First of all, it may not be a database issue.
In brief, Not able to execute sql statements which returns more amount of data for ex: select * from v$session,select * from dict; I Could execute simple statements like select * from version / some user tables with less number of data by using “where” clause.
This is not an issue when I am in a remote system which are located in the same network as the database server (North America). Issue is from my local system (Asia) alone. I am sure that it has something to do with network side.
C:\Documents and Settings>sqlplus system/******@XXXX
SQL*Plus: Release 11.1.0.6.0 - Production on Wed May 12 11:11:39 2010
Copyright (c) 1982, 2007, Oracle. All rights reserved.
Connected to:
Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - 64bit Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options
SQL>
SQL>
SQL> select * from v$session;
It just stops there. Session won’t disconnect or any ORA-XXXX error.
Done the following checks,
- v$session shows that the above session in question is in status as “INACTIVE” and state as “WAITING”
- tnsping from remote system and localsystem returns almost similar response time (600 msec - 670 msec)
- Couldn’t find anything unusual in alert / trace also in listener log.
- Since I am able to run some queries, no need to bother about firewall side.
- Done some basic analysis using wireshark packet analyzer - couldn’t see any error. However could see that local system is getting “response data” from the database server.
- MTU set to different size , 1500,1400,Defaul;t etc with no luck.
I am sure that many of you working on scattered environment might have faced similar issues. Your inputs will be very helpful for me.
Server – Oracle 11.2.0.1.0 64 on RHEL 5.4
Client - Oracle 11.1.0.6.0 on Xp. Tried with jdbc thin drivers also.
Thanks.

please refer below,
oracle@XXXXX$=>tail -100 alert_db1.log | more
Mon May 10 22:14:50 2010
Thread 1 advanced to log sequence 1947 (LGWR switch)
Current log# 3 seq# 1947 mem# 0: /data/oracle/oradata/db1/redo03.log
Tue May 11 01:31:48 2010
Thread 1 advanced to log sequence 1948 (LGWR switch)
Current log# 1 seq# 1948 mem# 0: /data/oracle/oradata/db1/redo01.log
Tue May 11 01:32:09 2010
Thread 1 advanced to log sequence 1949 (LGWR switch)
Current log# 2 seq# 1949 mem# 0: /data/oracle/oradata/db1/redo02.log
Thread 1 cannot allocate new log, sequence 1950
Checkpoint not complete
Current log# 2 seq# 1949 mem# 0: /data/oracle/oradata/db1/redo02.log
Tue May 11 01:32:28 2010
Thread 1 advanced to log sequence 1950 (LGWR switch)
Current log# 3 seq# 1950 mem# 0: /data/oracle/oradata/db1/redo03.log
Thread 1 cannot allocate new log, sequence 1951
Checkpoint not complete
Current log# 3 seq# 1950 mem# 0: /data/oracle/oradata/db1/redo03.log
Tue May 11 01:32:40 2010
Thread 1 advanced to log sequence 1951 (LGWR switch)
Current log# 1 seq# 1951 mem# 0: /data/oracle/oradata/db1/redo01.log
Thread 1 cannot allocate new log, sequence 1952
Checkpoint not complete
Current log# 1 seq# 1951 mem# 0: /data/oracle/oradata/db1/redo01.log
Thread 1 advanced to log sequence 1952 (LGWR switch)
Current log# 2 seq# 1952 mem# 0: /data/oracle/oradata/db1/redo02.log
Tue May 11 02:00:03 2010
Clearing Resource Manager plan via parameter
Tue May 11 02:01:03 2010
Thread 1 advanced to log sequence 1953 (LGWR switch)
Current log# 3 seq# 1953 mem# 0: /data/oracle/oradata/db1/redo03.log
Tue May 11 03:10:44 2010
Stopping background process CJQ0
Tue May 11 07:00:10 2010
Thread 1 advanced to log sequence 1954 (LGWR switch)
Current log# 1 seq# 1954 mem# 0: /data/oracle/oradata/db1/redo01.log
Tue May 11 13:37:35 2010
Thread 1 advanced to log sequence 1955 (LGWR switch)
Current log# 2 seq# 1955 mem# 0: /data/oracle/oradata/db1/redo02.log
Tue May 11 20:00:37 2010
Thread 1 advanced to log sequence 1956 (LGWR switch)
Current log# 3 seq# 1956 mem# 0: /data/oracle/oradata/db1/redo03.log
Tue May 11 21:30:45 2010
Starting background process CJQ0
Tue May 11 21:30:45 2010
CJQ0 started with pid=22, OS id=2034
Tue May 11 22:00:00 2010
Setting Resource Manager plan SCHEDULER[0x2FF5]:DEFAULT_MAINTENANCE_PLAN via scheduler window
Setting Resource Manager plan DEFAULT_MAINTENANCE_PLAN via parameter
Tue May 11 22:00:01 2010
Starting background process VKRM
Tue May 11 22:00:01 2010
VKRM started with pid=29, OS id=3328
Tue May 11 22:01:21 2010
Begin automatic SQL Tuning Advisor run for special tuning task "SYS_AUTO_SQL_TUNING_TASK"
Tue May 11 22:04:22 2010
Thread 1 advanced to log sequence 1957 (LGWR switch)
Current log# 1 seq# 1957 mem# 0: /data/oracle/oradata/db1/redo01.log
Tue May 11 22:04:41 2010
End automatic SQL Tuning Advisor run for special tuning task "SYS_AUTO_SQL_TUNING_TASK"
Tue May 11 22:06:29 2010
Thread 1 advanced to log sequence 1958 (LGWR switch)
Current log# 2 seq# 1958 mem# 0: /data/oracle/oradata/db1/redo02.log
Tue May 11 22:10:22 2010
Thread 1 cannot allocate new log, sequence 1959
Checkpoint not complete
Current log# 2 seq# 1958 mem# 0: /data/oracle/oradata/db1/redo02.log
Tue May 11 22:13:00 2010
Thread 1 advanced to log sequence 1959 (LGWR switch)
Current log# 3 seq# 1959 mem# 0: /data/oracle/oradata/db1/redo03.log
Tue May 11 22:15:58 2010
Thread 1 advanced to log sequence 1960 (LGWR switch)
Current log# 1 seq# 1960 mem# 0: /data/oracle/oradata/db1/redo01.log
Wed May 12 01:32:46 2010
Thread 1 advanced to log sequence 1961 (LGWR switch)
Current log# 2 seq# 1961 mem# 0: /data/oracle/oradata/db1/redo02.log
Thread 1 advanced to log sequence 1962 (LGWR switch)
Current log# 3 seq# 1962 mem# 0: /data/oracle/oradata/db1/redo03.log
Wed May 12 01:32:57 2010
Thread 1 cannot allocate new log, sequence 1963
Checkpoint not complete
Current log# 3 seq# 1962 mem# 0: /data/oracle/oradata/db1/redo03.log
Thread 1 advanced to log sequence 1963 (LGWR switch)
Current log# 1 seq# 1963 mem# 0: /data/oracle/oradata/db1/redo01.log
Thread 1 cannot allocate new log, sequence 1964
Checkpoint not complete
Current log# 1 seq# 1963 mem# 0: /data/oracle/oradata/db1/redo01.log
Wed May 12 01:33:11 2010
Thread 1 advanced to log sequence 1964 (LGWR switch)
Current log# 2 seq# 1964 mem# 0: /data/oracle/oradata/db1/redo02.log
Thread 1 cannot allocate new log, sequence 1965
Checkpoint not complete
Current log# 2 seq# 1964 mem# 0: /data/oracle/oradata/db1/redo02.log
Thread 1 advanced to log sequence 1965 (LGWR switch)
Current log# 3 seq# 1965 mem# 0: /data/oracle/oradata/db1/redo03.log
Wed May 12 02:00:00 2010
Clearing Resource Manager plan via parameter
Wed May 12 02:00:55 2010
Thread 1 advanced to log sequence 1966 (LGWR switch)
Current log# 1 seq# 1966 mem# 0: /data/oracle/oradata/db1/redo01.log

Why did I receive a request from Adobe Systems Incorporated to change my password?

I received a email from Adobe Systems Incorporated to change my password. I changed my password, then received another email that stated that I had changed my password and the if I did not request the change to contact Adobe System Incorporated.

The same thing happened to me.
Yesterday, when I logged in, I was told that I HAD to change my password which is understandable, because Adobe was recently hacked and nearly three million accounts were compromised.
See: http://www.pcmag.com/article2/0,2817,2425215,00.asp
I changed my password at that time, because I had no other choice.
This morning, I received an e-mail from adobe, telling me that I had to change my password because of the recent hacking, etc. This probably means that whatever automated system they're using to inform members hadn't been updated to take into account those who had just changed their passwords.
In any event, since I had just changed my password--and supposedly Adobe is no longer being hacked--I just left the new password as-is. But, it's probably a good idea, going forward, to change passwords on a regular basis--say once every few months. Most sites tell you to do that.
OF

Printing or exporting files from remote system running SAP

Hi to everyone,
I am trying to print or save exported data from SAP (in Excel)to a remote system where I am working. SAP is running in a remote server to which I am connected. So far I have only been able to print and save in the remote system (where SAP is running ), but can't do it to my printer/PC. It is probably a simple problem but I can't see an answer.
Thank very much to anyone who can give me a clue.
Antonio

check if printer LP02 or similar is defined on your SAP system. It prints via SAPLPD to your local printer.
To save anything to your local PC - you can use "save to local file" from the report, or WS_DOWNLOAD FM from ABAP.

Data request deletion problem from remote system.

Hi experts.
Now i am facing one critical problem . The description is as following:
we design the edw level in one phsical BW machine(A) which contains only dso infoprovider. This machine(A) works as datasource to provide data to another physical BW machine(B).
The dso in A system is exported as datasource , Cubes in B system load data through this datasource .
We first do the initialization with data contained on B system and then load delta data from A system. But if we want to delete some request in system A ,the system indicate this request can not be deleted unless the initialization in system B is deleted( this will lead to all the data missing in system B).
Can anyone explain this mechanism to me , please help me suggesting some kind of methods to delete the request in system A without deleting the initialization information in system B.
Thanks in advance.
Waiting online for your kindly reply.

1. Ask your Basis to look into it.
2. try analyse your Baqckground Process in SM51.
3. Is your Deletion Job started immediately or any Delay?
4. If That cube or ODS has only this request which you are deleting, go with Context Menu Cube or ODS (by right click) --> Delete Contents.
Delete Contents will improve performence compare to Request Deletion..
If you have request more than this, you should not go for this.
Nagesh Ganisetti.
Assign points if it helps.

Pages not displaying images when accessed from remote system-error on page.

Urgent pls help...
Hi,
We installed 10G database and installed application express.
we installed apex using the command @apexins SYSAUX SYSAUX TEMP /i/
then changed password using @apxchpwd
then @apxldimg.sql D:\oraclexe
we installed databse in D:
in D:/oraclexe we copied apex folder and done the above operations.
we run the listener using command
java -Dapex.home=D:/oraclexe/apex -Dapex.images=D:/oraclexe/apex/apex/images -Dapex.port=8585 -jar D:/oraclexe/apex/apex.war
then for four days it was working fine,
our team can access pages from client system and we were working on our project.
But for the last two days it is not working properly. I mean apex is loading with errors(without images).
the page is showing without images and links are not working
just data's in pages is only seen.
But when i connect through localhost it is working properly.
we installed it on server then there also localhost:8080 is working
but from client system has the above said problem
Give us a solution...
Thanks in advance...
Edited by: 874343 on Jul 22, 2011 5:26 AM

ListenerAdmin is showing blank screen
this is my command prompt when running listener
D:\oraclexe>cd apex
D:\oraclexe\apex>java -Dapex.home=D:/oraclexe/apex -Dapex.images=D:/oraclexe/ape
x/apex/images -Dapex.port=8585 -jar D:/oraclexe/apex/apex.war
INFO: Starting: D:\oraclexe\apex\apex.war
See: 'java -jar apex.war --help' for full range of configuration options
INFO: Extracting to: D:\oraclexe\apex
INFO: Using classpath: file:/D:/oraclexe/apex/apex/____embedded/start.jar:file:/
D:/oraclexe/apex/apex/WEB-INF/lib/apex.jar:file:/D:/oraclexe/apex/apex/WEB-INF/l
ib/commons-fileupload-1.2.1.jar:file:/D:/oraclexe/apex/apex/WEB-INF/lib/je-4.0.1
03.jar:file:/D:/oraclexe/apex/apex/WEB-INF/lib/ojdbc6.jar:file:/D:/oraclexe/apex
/apex/WEB-INF/lib/ojmisc.jar:file:/D:/oraclexe/apex/apex/WEB-INF/lib/poi-3.6-200
91214.jar:file:/D:/oraclexe/apex/apex/WEB-INF/lib/ucp.jar:file:/D:/oraclexe/apex
/apex/WEB-INF/lib/xdb-11.2.0.jar:file:/D:/oraclexe/apex/apex/WEB-INF/lib/xmlpars
erv2-11.2.0.jar:
INFO: Starting Embedded Web Container in: D:\oraclexe\apex
Jul 22, 2011 6:48:19 PM ____bootstrap.Deployer deploy
INFO: Will deploy application path=D:\oraclexe\apex\apex\WEB-INF\web.xml
Jul 22, 2011 6:48:19 PM ____bootstrap.Deployer deploy
INFO: deployed application path=D:\oraclexe\apex\apex\WEB-INF\web.xml
Using config file: D:\oraclexe\apex\apex-config.xml
-- listing properties --
PropertyCheckInterval=60
ValidateConnection=true
MinLimit=1
MaxLimit=10
InitialLimit=3
AbandonedConnectionTimeout=900
MaxStatementsLimit=10
InactivityTimeout=1800
MaxConnectionReuseCount=1000
APEX Listener version : 1.1.2.131.15.23
APEX Listener server info: Grizzly/1.9.18-o
Jul 22, 2011 6:48:44 PM com.sun.grizzly.Controller logVersion
INFO: Starting Grizzly Framework 1.9.18-o - Fri Jul 22 18:48:44 IST 2011
INFO: http://localhost:8585/apex started.
Using JDBC driver: Oracle JDBC driver version: 11.2.0.2.0
Edited by: 874343 on Jul 22, 2011 6:42 AM
Edited by: 874343 on Jul 22, 2011 6:51 AM

Readtimeout error while generating JCA from remote system usingoraclestudio

Please anyone give the solution to the following query
when i tried to generate the JCA file using oracle studio which is in remote system, it gives the timeout exception.
Please any one give the reason.
Thanks
amar
Edited by: 897448 on Nov 16, 2011 11:04 PM

You are trying to use a custom class as a return type?
The return type needs to be JAX-B compatible
see: http://download.oracle.com/docs/cd/E17802_01/webservices/webservices/docs/2.0/tutorial/doc/JAXWS3.html
You should avoid using user defined complex types as much as possible because they require the clients to be able to process them as well making your webservice less portable and thus defeating the main advantages of webservices.

Mounting a shared zfs onto a remote system : how to restrict permissions

I'm trying to setup some basic nfs shares out of a zpool and failing miserably as it is.
Here's what I have; all my machines are in 10.154.22.0/24 .. it's basically a test (pre-prod) network
- oslo, the nfs server, 10.154.22.1, SunOS 5.10-x86
- helsinki, the remote machine, 10.154.22.4, linux 2.6.22
On oslo I've created a zpool named pool2 with a zfs filesytem called tools. pool2/tools is mounted in /tools. I've further restricted access to /tools with : chown 0:nfsusers /tools && chmod 770 /tools . I want to ensure that only users from the group nfsusers will be able to read/write/execute into /tools.
I have a user, dbusr who is part of the nfsusers group. He can access the FS as he wants. All usernames / uids / gids are identical across the whole network .
Ok now, on helsinki, I have a directory /export/helsinki/tools . This directory is also chowned 0:nfsusers and chmoded 770.
Now, on helsinki everytime I try : mount -t nfs oslo:/tools /export/helsinki/tools I get :
mount.nfs: oslo:/tools failed, reason given by server: Permission denied
Server-side I've modified /etc/default/nfs so that both client and server run at NFSv3 (I've read somewhere that NFSv4 is not that well supported on Linux). The zfs share is set up like this:
zfs set sharenfs=rw=10.154.22.0/255.255.255.0 pool2/tools .
I'd like all my users in the group nfsusers to be able to write on the remote nfs FS, and optionally, root to be able, too.
What am I missing, here ?
Regards,
Jeff

It was not a problem. The raw partition with the soft partition or ZFS filesystem works fine in the local zone.
Thank you for your help.
-Yong

RFCs calling from remote systems

Hello Abapers,
Can anyone tell me how to find the list of programs which are calling remote function modules? For example programs in CRM system calling function modules in ECC...
Thanks,
Himadama

Hi,
this is only ardly possible depending on your goal.
There are lots of RFC calls especially in CRM for middleware purposes.
Option a) - You try to find all pla ces where z*modules are called that are not existing in CRM
Option b) - You want to find all RFC enabled modules of ERP called in CRM
Option c) - You want to find all RFC calls in CRM targeting the defaulting ERP destination
Solution for a)
- Go to table WBCROSS (which is global the "where used list")
and check for all Z* modules
- Copy the list of modules e.g. in a file
- Search table trdir (registry of function modules) with this list
-> all modules that are not in this list are probably RFC modules from a backend
Solution for b)
- Go to ERP SE37 and open the help
- open the advanced options
- mark "RFC modules"
- search and save the whole list of RFCs relevant
- Go to CRM and check table WBCROSS where these modules are used
Solution for c)
- go to CRM and check for a module called "SMOFERP" or similar
It returns the name of the default RFC destination of an CRm system to its default ERP.
- Check the where used list of this module - should guide you close to the calls
mfg,

How to Download a file from remote system.

Hi,
If anybody knows how to download a file directly from database to localdirectory

I have data in a blob column of one table.
from a html page if i click download link then a download dialog box shoud come saying save and cancle etc ., the blobdata from database should be retrived and stored in desired loaction in client system.

Best scenario sending/receiving data to/from remote office

We must implement some interfaces, sending and receiving from/to a great number of local office (more than two hundred) located arround our country.
Moreover this local office may be off-line all night long and also at times, so we must control it sending them information.
So... what's the best scenario in the case of SAP --> local office?
and what's the best scenario in the case local office --> SAP?
It's very important to guarantee control of exception and avoid lost of information.
Thanks, in advance.

hi
if you want to transfer data from local offices to SAP and vice versa u need to use SAp XI in between and schedule the interfaces.
if u tell me you requirement in deatil i can help you out
regards
Sheetal

How to reset my apple id password if i never received the email from system?

i forget my apple id password and tried to reset it by email, but i never received the email from the system, how can i do??

If you haven't received the email, and you've checked the spam folder on the account (if you have a rescue email address on your iTunes account then you've checked that email account as well ?) and tried requesting the email again, then try contacting Support in your country, they should be able to reset it for you : http://support.apple.com/kb/HT5699

Delete a .csv file from desktop system

Hi All,
My requirement is to read the .csv file from the desktop system having the shared folder and delete the file after read successfully.
Here I can read the .csv file from the location using the function RFC_REMOTE_FILE and updated the content into internal table.
But I cant delete the file from the presentation server ( Desktop system).
Can anyone tell me how to delete the .csv file from the desktop system on different location.
Note:
I followed this link to read file:
http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/9831750a-0801-0010-1d9e-f8c64efb2bd2&overridelayout=true

Hi Rob,
Thanks. I solved this problem myself.
The solution to delete the file from remote system is
concatenate 'DEL' i_filename i_dirname into v_bkfile separated by space .
call function 'RFC_REMOTE_EXEC'
destination c_dest
exporting
    command               = v_bkfile
exceptions
    system_failure        = 1 MESSAGE v_ermsg
    communication_failure = 2 MESSAGE v_ermsg.

Calling a transaction in Remote System

I've a report in System A which shows data from System A & System B. When I click on a record which belongs to System A, I do a call Transaction 'XXX' etc...When I click on a record which belongs to System B, is there a way to show the transaction from remote system? Please let me know & an advance Thanks for all the inputs.
Regards
Shantharam

This is easier than you think. All you need is an RFC destination and this function module. In this example, I am using the STARTING NEW TASK to open anther session for the transaction called.
call function 'ABAP4_CALL_TRANSACTION'
    destination 'PRD'           "<---- Your destination
    starting new task 'Test'
exporting
    tcode                         = 'SM50' "<- Your tcode
EXCEPTIONS
   CALL_TRANSACTION_DENIED       = 1
   TCODE_INVALID                 = 2
   OTHERS                        = 3.
Regards,
Rich Heilman

Receiving zfs snapshots from remote system

Similar Messages

Maybe you are looking for