Recently i upgrade my iPad2 to 7.1(11D167) and now the wifi connection is very weak, I am not sure if it is a hardware or software issue, help please!

Recently i upgrade my iPad2 to 7.1(11D167) and now the wifi connection is very weak, I am not sure if it is a hardware or software issue, help please!

I am not sure, I have full signal on my iphone 5  and just 1 dot on my ipad, tomorrow I will test connection with other router and network, I thank you for your help and I will tell you the test result when done

Similar Messages

  • TS1702 I just updated my ipad2 to ios6.0.1 and now the stand view in maps shows no information.  The maps are there, but are just the outlines with no text or roads.  Help.

    I have just updated my ipad2 to ios6.0.1 and now having problems with the MAPS APP.  The standard view outlines the area, but it is blank, showing no text or roads.  Anyone know how to solve this?

    Have you tried a - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.
     Cheers, Tom

  • I upgraded to iso6.0.1 on 4s and now the battery runs out quickly and text sounds/music do not work. Please can someone help.

    Help - I upgraded to iso6.0.1 and now the battery runs out quickly and the text and sound does not work! can anyone help me?
    Thanks

    Use the search box at the top of this page or look in the MORE LIKE THIS box to your right.  If you can find your way to this forum, you certainly can manage a search.

  • Upgraded to iOS7 on my iPad Mini and now the mute button doesn't work

    I upgraded to iOS7 on my WiFi only iPad Mini and now the mute button doesn't work.   It toggles between Ringer on and off and of course, there is no ringer on my WiFi iPad. Same thing happens in the control panel when I switch functions and try to mute the sound there.  It used to toggle between Volume on and off.  Anyone know how to fix this?

    Try This...
    Close All Open Apps... Sigh Out of your Account... Perform a Reset... Try again...
    Reset  ( No Data will be Lost )
    Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Release the Buttons.
    http://support.apple.com/kb/ht1430

  • I tried upgrading my Ipad to IOS 4.3 and now i get a message that my ipad can not be activated. HELP!

    I recently tried to upgrade the software on my Ipad to IOS 4.3 (in order to get Google Earth and now I get this message:"  Your Ipad can not be activated because the activiation server is temporarily unavailable. Try connecting your Ipad to ITunes [i did] to activate it or try again [i did sever times] in a couple of minutes. If this problem persists, contact Apple Support at apple.com/support"

    You can only update to the current iOS 5.1.1.
    iOS 5: Updating your device to iOS 5
    http://support.apple.com/kb/HT4972
    iOS: How to update your iPhone, iPad, or iPod touch
    http://support.apple.com/kb/HT4623
    If you are currently running an iOS lower than 5.0, connect to your computer & click on the "Update your device using iTunes".
    Tip - You may need to disable your firewall and anitvirus software temporarily.  Then download and install the iOS update. After you update to iOS 5.x, the next update can be installed via wifi (i.e., not connected to your computer).
     Cheers, Tom

  • I upgraded my imac to OS Mountain Lion and now the Seagate Goflex external HDD is not recognised

    I upgraded the iMac to Mountain Lion and it does not recognize the Seagate Goflex External HDD that I was working from earlier. I do not want to buy a special program since the Goflex HDD was working on both mac and Windows without any problems before the upgrade. The Goflex HDD is still working on my Macbook pro so there is no problem in the HDD. Is there something that needs to be activated... Please help

    A bit more info for those of you reading this.... the problem seemed to be in iTunes. For each connected device , if I clicked on the Photo option I could no longer select the second radio button for limiting the photos by Events, Albums, etc.  It was an all or nothing deal. But selecting all would cause the error.
    So I had read the other forum posts about the "&" symbol being the cause of the problem.  I went through iPhoto and made all of the changes. It did not work. I then looked at iTunes, using the AlbumData2.xml file listed in the other forums as a reference.  I found one album with the "&". I edited that one.  Still would not work.  So then I spent 3 hours on the phone with AppleCare last week. I talked with 4 different advisors. None of them had heard about the "&" error from the forums. We tried everything in iPhoto including repair and rebuild.  Finally we created a whole new library and reimported my master photos from my original one.  Using this option would allow me to now check off that radio button in iTunes.  BUT... I now lost all of my albums and events and would need to rebuid them.  I was not happy. They agreed and we set up time to talk this week.
    So today I talked with AppleCare again. They now have more info and said the problem has to do with iTunes and the new iPhoto 9.4. It does not like the "&" symbol anywhere in either iPhoto or iTunes. So they now have me going through everything in my iTunes library. Genre is OK but any other item cannot have " & ". I have several dozen to edit and will do it over the weekend and then restore my original iPhoto Library and see if I can finally get it all to sync. I will let you know how I make out, but apparently you need to eliminate " & " from every entry in iTunes and iPhoto.
    Quality control is not up to par with Apple these days. 

  • I have upgraded my iPad 1st generation to ios5 and now my wifi is grade out cannot connect to any network

    Post I have upgraded to the latest is release from apple my wifi button under setting has grayed out

    First, take a look and see if you have airplane mode turned on.  If so, turn it off.
    Second, goto settings, general, reset, then reset all network settings.
    Third, if no joy, try a reboot.

  • TS1398 I recently got a new screen for my iPhone 4s and now no wifi networks are showing up when I turn the wifi on.

    I tried resetting my networks and turning my phone on and off with the wifi turned on, but neither of it worked. I don't know what to do and I really need wifi on my phone for tomorrow.

    Did Apple install the new screen?  Or an Authorized Apple Service Provider?  If so, you should return to the location that replaced your screen to see if they didn't hook something up properly.
    If it wasn't an Authorized Apple Service Provider, or an Apple Retail store, You should take it back to them and discuss it with them.  In this case, Apple will likely not offer any replacement service as it was opened by an unauthorized third party.

  • Recently changed my hard drive on my intel iMac and now the microphone doesnt work

    I might have messed up a connection but don't know where to look.
    Help

    Do a Google search for your model iMac (take apart instructions).  2 good places to start: 
    iFixit 
    YouTube’s “How To” tutorials.

  • I upgraded to Elements 12 from Elements 8 and now the Organizer locks up just as it is starting.

    Organizer first shows a box stating "restoring People Recognition Data" and then "Elements 12 has stopped working".  I am using Windows 8.

    Is that a large catalog from some previous version that is opened by default?
    Please see- http://www.elementsvillage.com/forums/showthread.php?t=66932
    Thanks
    Andaleeb

  • HELP: I downloaded upgrade for App World to BB 8900 and now the App World icon is gone!!

    Hi
    I downloaded BB App World 1.1.0.33 for my Javelin 8900 yesterday and just realized today that my App World icon is gone/ hidden!
    I hav searched all folders and it is not there.
    When I checked my applications in options it is very much there as being fully installed!
    How do I 'unhide' or find App World please??
    Solved!
    Go to Solution.

    jmrmb80 wrote:
    Is it hidden on the home screen? Did you check if it was hidden in either the Downloads or Applications folder?
    No it is not hidden on the home screen as i set it to show all. It wasnt located in the downloads folder either. I had mentioned earlier that when I checked on the list of Applications installed it was listed there as being installed on the system.
    My solution was to delete the installment from the Applications list, reboot the device then re-install it once more (I did this twice btw). When I did that the second time I checked the downloads folder and it was finally there! I hope this helps @ rcorai.
    Though I had pretty much preferred if I could have located the previous app rather than delete n re-installing it!

  • 10.8.5 upgrade and  now the battery drain is terrible

    I recently updated my MacBook Pro to 10.8.5 and now the battery drain is terrible.  Any suggestions?  I check the activity monitor and that seems to be fine.

    1. Check the cycle count of the battery. It may be due for replacement.
    2. If not, follow these instructions.
    3. You can also try resetting the SMC.
    4. Make sure your system is up to date in Software Update.
    5. Make a "Genius" appointment at an Apple Store, or go to another authorized service center.
    Back up all data on the internal drive(s) before you hand over your computer to anyone. If privacy is a concern, erase the data partition(s) with the option to write zeros* (do this only if you have at least two complete, independent backups, and you know how to restore to an empty drive from any of them.) Don’t erase the recovery partition, if present.
    Keeping your confidential data secure during hardware repair
    *An SSD doesn't need to be zeroed.

  • I have recently upgraded my iMac Intel G5 iSight to OS 10.6.8 and now the internal mic does not work with skype or facebook. I can here static when playing back clips. Do I need to update firmware or reload old sys parts

    I have recently upgraded my iMac Intel G5 iSight (iMac5,1) to OS 10.6.8 and now the internal mic does not work with skype or facebook. I can here static when playing back clips. Do I need to update firmware or reload old system parts. I have zapped PRAM. The blue indicator in system audio panel will appear for a second as I slide the bar for internal mic but then it disappears. Is there a fix?

    The sound seems very faint but can here static on playback.

  • HELP NEEDED! My wife's 5c won't recognise on my laptop anymore. I plug it in and the laptop makes a sound but won't show up the phone. I only recently discovered this problem when I upgraded. It will recognise my 5c and even the iPad but not her 5c

    I discovered this problem when I upgraded my iPhone 4 to a 5c.
    My laptop will recognise my 5c and even the wife's iPad but won't recognuse her 5c, when I plug it in it makes a sound but just doesn't show up in iTunes.
    It DID work on my laptop as recently as November when I backed up her phone and updated her software but like I say ever since I upgraded it just won't recognise her 5c but does mine.
    I just can't think what is wrong? I haven't messed around with anything on the laptop or messed around with the wife's settings on her 5c
    HELP!!!!

    I would test with another computer and another cable
    if it the device would not be detected by any computer I
    would say that it's connector was broken

  • Recently upgraded Mac 24" to Lion (clean install) and now no external hard disks work with Time Machine

    Recently upgraded Mac 24" to Lion (clean install) and now no external hard disks work with Time Machine.
    installed new internal disk first with fresh 10.7.3 Lion software. Also upgrade ram to 4GB. Work great, super fast.
    BUT.... my WD 1TB firewire400 external disks no longer work with the Lion enabled machine now.
    FURTHER... I read somewhere that WD is problematic with Lion but Seagate was not... so I went and bought a new 3TB Seagate GoFlex.
    When it didnt work properly either, I patiently searched and found a software/firward upgrade and applied.
    I re-partitioned disk to extened/journaled standard, etc.
    Then assigned the particition to Time Machine. Drive turned the blue/grey color, so I thought it would work.
    But, it has now been in "preparing" mode in Time Machine for HOURS....
    What is up Apple? So dissappointed. Ive read these type of problems are notorious with Lion and I wish I never upgraded.
    Are you trying to make issues with External disks, to drive people to iCloud?  That trick ont work in me. I will not reward bad behaviour Apple.
    Please provide a fix... I wasted hours/days screwing around with this, instead of using the Mac for what its intended!

    Solved by Pondini, on another thread I opened...
    Answer:
    Sounds like either:
    A directory problem on your internal HD.  Verify your internal HD, and Repair any other volumes being backed-up per #A5 in Time Machine - Troubleshooting.
    Something in OSX may be damaged.  You've tried the "combo," so a fresh copy of OSX (that won't disturb anything else) would be worth a try (and you don't need a tech for that).  See Installing the ''combo'' update and/or Reinstalling OSX.

Maybe you are looking for

  • How can we default a Purchase Organisation in the PR generated through MRP

    Hi, How can we default a Purchase Organisation in the PR generated through MRP (This is a Auto generated PR when the MRP Run is taken) We take a MRP Run for CBP. After the MRP Run system Auto generates a PR. But this PR does not have the P.organisati

  • IPTC legacy Contact - not imported by 3.4.1

    Last year I tried out Aperture and found that it was able to see the 'IPTC legacy Contact' field. This is important for me, as it corresponds to the field "People" in the wonderful iView programme that I've been using for ever. It lists the people on

  • ITunes rearranges my playlists ALPHABETICALLY when burning to CD !

    When I carefully put together a playlist from my library...I put the individual songs in a specific order. But when I click on 'burn disc' it automatically rearranges the songs into ALPHABETICAL order ! How to I get it to leave the songs on the playl

  • G4 Xserve as File Server..

    I have a G4 Xserve that I want to use for a file server. Can anyone point me in the right direction to start this process. I need to know it all I am not familiar about setting this up but it needs to be done soon. I don't know if I can do it using O

  • How to debug oracle forms 4.5 application

    Ww have an application which is behaving badly. We have no documentation on it ,nor any source code. It seems to be written in Oracle forms 4.5 ( of which I know little) . There is an applications directory with about 100 files ,all with ending .fmx