Reclassification package running on GNONE group level

Hi all
I am having trouble with Reclassification process where BPC is posting at GNONE group level also with GROUP CURRENCY. Reclass is executing POST CONSOLIDATION DATA.
Ex:
Unit         Act       GROUP     DataSoruce                       Amount
1000    ACT1     GNONE       UPLOAD_DATA                200
1000    ACT1     GROUP1       UPLOAD_DATA               200   --- Post Consolidation Data
Reclass DM for Unit - 1000
Result:
1000    ACT1     GNONE       UPLOAD_DATA                200
1000    ACT1     GNONE       RECLASS                        - 200    : Post RECLASS
1000    ACT1     GROUP1       UPLOAD_DATA               200   --- Post Consolidation Data
1000    ACT1     GROUP1      RECLASS                        - 200   :   Post RECLASS
My concern is GNONE level from Reclass Result and I am using STANDARD BPC SCRIPPT Logic
Any Inputs are highly appreciated
Thanks
Ramana

Resolved now

Similar Messages

Group level balance retrieval

Hi,
I was wondering if anyone of you had to report on balance values for the GRE_RUN and GRE_YTD dimensions. So far, the only packages that I've found take a parameter for the assignment_action_id, which doesn't make sense to me given that the dimensions I'm looking for don't take into account any particular assignment.
I've read on Metalink about the Balance Reporting Architecture, and the document for "Phase 1" mentions "Group Level Balances", but it doesn't give much detail on how to query the balance tables. Any clues on what package to use (and how to use it), or any example of a SQL statement will be truly appreciated (even more if it’s Canadian-specific)
Thanks,
Pablo

Hi Thierry,
Indeed, this is what I tried first, but did not manage to find a good example for my legislation (CA). After a second look, I found a report that uses the pay_ca_group_level_bal_pkg package, which provides better access to group level balances.
Thanks again for your help!
Pablo

BPC MS 10 SPRunConversion at Group level

Dear BPC Experts,
We are implementing SAP BPC MS 10. SPRunConversion is running for each currency defined but its not running at Group level. I am getting errors FX-140 No Currency Available, sometimes i get FX-300 Timeid=20140700 - Nothing to extract from Fact - CLCFXTRANS... I have run FX conversion for the same timeid. Different errors if I change some parameter.
FX rates are maintained. My SP is below:
*RUN_STORED_PROCEDURE =
SPRUNCONVERSION([Conso_FX],[ACTUAL],[INR],[GLOBAL],[%SCOPETABLE%],[%LOGTABLE%])
*COMMIT
Figures are getting converted into INR. Ownership and Scopes are maintained. I am unable to figure out the reason why N_SCOPE is not getting updated with Group so that i can proceed with IC Elimination.
Can you please help with some pointers based on experience.
Regards,
Rajat Gupta

Hi Arnold,
I ran:
*RUN_STORED_PROCEDURE =
SPRUNCONVERSION([Conso_FX],[ACTUAL],[INR],[GLOBAL],[%SCOPETABLE%],[%LOGTABLE%])
The system converted USD to INR.
Then i ran:
*RUN_STORED_PROCEDURE =
SPRUNCONVERSION([Conso_FX],[ACTUAL],[S_CGM01],[GLOBAL],[%SCOPETABLE%],[%LOGTABLE%])
*COMMIT
S_CGM01 is a member from Scope dimension. I get "*ERROR* FX-300 Timeid=20110200 - Nothing Extract from Fact - CLCFXTRANS
I checked the data is correctly maintained.
Regards,
Rajat Gupta

PSV3 Business Information Report - comparing at Group level and Type level

Good afternoon folks
I am getting some instances where the summation of the hours for the "Business Event Information" report for a specific business event, when I run it at Event Group level is incorrect; however when run at Event Type level it is correct.
Eg: business event 50135548 has a schedule of 2 hours.
When I run the Business Event Information report at event type level it shows 2 hours for this specific event; however when I run it at Event Group levle it shows 120 hours for this specific event.
Can anybody suggest as to why this is happening.
Many thanks
Dawn

You could do this like this, I think:
If Sum ({@total}, {@monthName}) = 0 Then
0
Else
Sum ({@Unscheduled}, {@monthName}) / Sum ({@total}, {@monthName}) * 100;

Reporting level Currency translation and group level Currency translation

Hi All,
Could any body explain me reporting level Currency translation and group level Currency translation.Please expalin me step by step scenario.
Thanks in advance.
Setty.

Hi Jian,
In my recent implementation completed, business only had one currency to deal with i.e. USD. Data was coming from ECC and we loaded all the data in LC instead of USD using transformation *NEWCOL(LC). Next, you can maintain a rate of 1 in the rate model and run the currency conversion.
This will generate the same data values against USD. So, your statement " if we load LC and than convert it into USD, the data vulu will de double." is incorrect. In the system, you will have same set of values against LC as well as USD.
I suggest that you configure Currency Conversion for future reqmts if any.
Regarding BCF, balances from previous year (Balance Sheet Accounts) will need to be carried forward as opening balances to next year else your BS won't give true picture.
Regards,
Ashish

Row level access at the Group level assignments

I know the concept ROW LEVEL security or "Access Restrictions" but I haven't really implemented it before.
1. Create a Row level security from the BO -UNIVERSE designer from the TOOLS> MANAGE SECURITY>MANAGER ACCESS RESTRICTIONS.
RESTRICTION-EMPLOYEE ( If user is available in the table then only display the results)
In the where clause Employees.Employee_Name = @Variable('BOUSER') here the BO user always at the user level ID.
2. Then assign the above restriction to the USER or GROUP.
The question what I have.. if I assign the Restriction at the GROUP level, will this condition be applied for all users under that group. Do I need to do anything else.
Please confirm.

THose are two different things you are talking about here:
1) @Variable('BOUSER') is a placeholder that is replaced during the runtime with the ID of the user who is running the report accessing your universe. Adding this expresson somewhere in your universe (does not have to be necessary the where clause of an access restriction) will mean that the generated SQL statement will contain the user ID at the related place.
2) Access restrictions: You can setup access restriction for users or even groups. If you set those for groups then the restriction will be applied to ALL users being members of this group, when they run a report that uses your universe. If a specific user belongs to 2 different groups for which universe restrictions are applied, then the conflict will be solved according to the settings in your universe. Access restrictions can be used to change the where clause of the generated statements but also for using different credentilas to connect to the database (based on the group) and/or a different set of parameters eg. the maximum bnumber of rows fetched by the universe can vary among different groups.
Hope this helps.
Regards,
Stratos

ME21N Material group level authorization is not working in ECC 6.0

Dear Security Experts,
We have created a role Z_ME21N with one Tcode ME21N. The role has to restrict users in the material group level.
For that, we added Authorization object M_MATE_WGR.
1. When we are trying to add field values for {M_MATE_WGR, BEGRU}, generally it should show me the list possible values to be used based on the MM configuration related to Material Authorization Group. We have correctly configured the authorization groups from V_TBRG for M_MATE_WGR. But itu2019s not showing any possible values.
2. However we are able to add values manually, but I guess these are not being considered during authorization check and our restriction on Authorization group level in ME21N is not working.
Test Scenario: We have manually added values 005,007,009,010,013 (which is pointing to specific material group) to BEGRU of M_MATE_WGR. We already assigned this Authorization Object to role Z_ME21N and this role has been assigned to u2018testuseru2019, but the authorization check with the M_MATE_WGR authorization group is not happening. It allows operations on all the material groups.
Anybody came accross same scenario?
SAP Prodcut version : ECC 6.0
Database : SQL Server 2005
Support pack level : 15
Please share your views, thanks in advance.
Regards,
Abu Sandeep

Dear All,
I got a reply just now from SAP regarding the same issue.
I coudnt understand what SAP and you are saying.
Dear Abu
*Apologies for the delay. This message has been turned on to application*
*area of MM from the Basis side just now.*
*Unfortunately, authorization object "M_MATE_WGR " is not checked*
*in the purchasing transactions (PR & PO), the system works as standard*
*functional designed.*
*Only the following objects are checked in PR/PO:*
*M_BEST_BSA Document Type in PO M_BANF_BSA Document Type in PR*
*M_BEST_EKG Purchasing Group in PO M_BANF_EKG Purchasing Group in PR*
*M_BEST_EKO Purchasing Org. in PO M_BANF_EKO Purchasing Org. in PR*
*M_BEST_WRK Plant in PO M_BANF_WRK Plant in PR*
*Setting in check/maintain on in SU24 only means that the profile*
*generator will propose the object when creating a user, however is*
*does not mean that M-MATE_WGR will be checked.*
*Please close this message by pressing the confirm button at your*
*earliest convenience.*
*Many thanks in advance for your understanding.*
So, how can I resolve this problem? John, are you sure that, you implemented this successfully?
SAP says, this cant be done.
Regards,
Abu Sandeep.

SSIS 2012 package runs under SSDT but fails with permission error from SSMS

I have a simple package that pulls data from a text file located on a Windows file server that runs successfully from SSDT on my client.
However, when deployed and running the package via SSMS from the client, the package fails with a permission error, with the error stating that the data file could not be opened.
I have done some investigation and have seen some info that states that a package run from SSMS runs under the account on which you are logged on to the machine, which I would have thought is correct. This is therefore the same account when running from
SSDT (which works) and I can see from the SSIS Report that the 'Caller' is stated as my account, so if this is the case why isin't the package working.
I've also seen an MSDN forum answer which stated the opposite that the package when run from the IS Catalog in SSMS doesn't run under the account on which the client is logged on with, which is the opposite of the above, but doesn't indicate which account
it is using.
So what account is being used to run SSIS 2012 packages from the IS catalog from within SSMS ?
If it is the account on which you are logged onto the client running SSMS, why is it not working when the account has the necessary permissions (as provent when running from SSDT) ?

I am aware it's using my account and not one of the service. There's nothing in the posts above which suggests I'm using the service account. I don't know why people keep assuming that I'm running the package from a job. I've never stated that in any of
the posts I'm running the package from a job. It's been made quite clear I'm running the package from the IS Catalog on SSMS:
"This is simply selecting a package from the IS Catalog, right-clicking and selecting Execute package.", as per the Nov 18 post, and in the original post "....So what account is being used to run SSIS 2012 packages from the IS catalog from
within SSMS".
Just to be clear, the package is NOT being run from a job. It's using the Execute package option when selecting the package within SSMS from the IS Catalog and it's running under the account on which I am logged on to my client.
Please read carefully. I was just answering your question "So what account is being used to run SSIS 2012 packages from the IS catalog from within SSMS ?" and stating that you where right and that it uses your account to run the package
when you execute a package manually from the Catalog and that you can prove that by logging the system variable.
A good suggestion about using a share in the task to map the drive and I will try this. I would find it strange that SSMS requires this mapping whereas SSDT does not though.
Ok let us know your findings. If it doesn't work you can also test it with a password and username:
net use f: \\financial\public yourpassword /user:username
Please mark the post as answered if it answers your question | My SSIS Blog:
http://microsoft-ssis.blogspot.com |
Twitter

How to create a formula based on group level

Hi,
If there are three group level ins a report:
How can I creat a formula to put on page header depended on current group level?
Thanks!

Thanks, Abhilash ans Sastry
I really try to do is to show different text on page header depend on which group level is. the reason is that if there are multi pages group footer, only the first page has group name on tilte if I put group name on the footer.
I would like to put group name on page header, but have to know which group level is.
Thanks again

BW Report Designer - Group level changes

Dear all,
we intent to use BW Report Designer and want to insert page breaks between group level changes
so that we get one page per item of a group (as it is possible in Crystal reports).
Example:
Sales organization is listed in column 1 of our query - we need one page per item -
page 1 - Sales organization 100
page 2 - Sales organization 200
Concerning to the online documentation it should be possible, but we can't find this functionality
within the BW Report designer.
Could anybody assist us?
Thanks
Hagen

Check the below post and you'll have your solution! Hope this helps.
Page Breaks in Report Designer

Group Level Data Level Security not working

I'm trying to test the data level security at the group level.
Here's what I did
1. Went to the security -> Groups -> Permissions -> Filters
2. In Name added the Fact table on which I want to filter.
3. Selected "Enable"
4. In Filter Column I added a filter on a column in the dimension. (I didn't use any session variables in the filter)
When I create an answers query with the column from the dimension (Which I used in filter) and fact from the fact table where I defined the filter, the filter is not applied..
Am I missing something in the creation of filters?
Thanks in Advance.
Rama.

Hi,
If the user is member of both user defined and Administrator group no filter will be applied to them because Administrator group will take precedence and no filter can be applied to Administrator.Even if you ooen Administrator group, you will see that permission tab is disabled for Administrator group.
Hope this helps.
Regards,
Sandeep

Bug in report sorting? Sort doesn't work in last group level.

Is this a known error? Is there documentation from Oracle about it?
My query is a simple select from a table. I then created three group levels. Each group contains a value for sorting (up arrow next to column). However, data is not sorted by the value in the third group.
Try:
create table test_sort (a number, b varchar2(5), c varchar2(5));
insert into test_sort (a, b, c) values (1, 'A', 'X');
insert into test_sort (a, b, c) values (1, 'B', 'Y');
insert into test_sort (a, b, c) values (1, 'B', 'Z');
insert into test_sort (a, b, c) values (1, 'A', 'Z');
insert into test_sort (a, b, c) values (2, 'A', 'Z');
insert into test_sort (a, b, c) values (2, 'A', 'Y');
insert into test_sort (a, b, c) values (2, 'A', 'X');
insert into test_sort (a, b, c) values (1, 'A', 'Y');
insert into test_sort (a, b, c) values (1, 'B', 'X');
Create a query tabular report with the wizard (select * from test_sort). Then make the groups: first a, then b, then c. Make sure that there is an arrow next to the values (sorting).
The report only displays a and b values sorted.
Edited by: user489847 on Jun 3, 2010 1:19 AM

Hello,
This is the normal behaviour documented here :
http://www.oracle.com/webapps/online-help/reports/10.1.2/topics/htmlhelp_rwbuild_hs/rwcontxt/props/pi_col_break_order.htm
Restrictions
Break Order has no effect on columns that belong to the lowest group of a particular query.
Break Order only affects columns in groups that are above the lowest child group of a query.
You have to add an "ORDER BY" in the SQL query in order to sort the columns belonging to the "lowest group"
Regards

Problem in package run inside stored procedure

i have ssis package to import data from excel to database.
package is running correctly inside BIDS.
but when i run package under stored procedure it is giving error :
Error:   Code: 0xC0014023
   Source: loop sheets in excel
   Description: The GetEnumerator method of the ForEach Enumerator has failed with error 0x80040E21 "(null)". This occurs when the ForEach Enumerator cannot enumerate.

Hi BI_DEV_19,
Does the package connects with network resources? If so, try set the job step to run under a proxy account that is created based on a domain account. In BIDS, the package runs under the Windows account that you log onto the operating system.
The error message “The GetEnumerator method of the ForEach Enumerator has failed with error 0x80040E21” may occur because the ADODB.dll file is corrupted or missing. You can check whether the ADODB.dll exists in the following folder:
C:\program files (x86)\Microsoft.NET\Primary Interop Assemblies
In this situation, you can back up the existing ADODB.dll file, and copy one from another machine to this server.
Regards,
Mike Yin
TechNet Community Support

Groups & Levels issue !!

Dear Experts/Gurus,
I have created the Groups & Levels through Revise Pay Scale Groups and Levels for both Staff & Workers separately but when i checked the details in PA30 through infotype 0008 only Staff grps & levels is displayed their but Workers grps & levels is not at all displayed even though i have created the same.
Please let me know what may be the issue.
Rgds,
Vikrant

Hi,
For both groups do you have one allowance grouping or different?
assin the allowance group to your payscale sturcture(payscale type, area, group, level) in the table of V_T7INA3. Then you can get the groups the in master data 0008IT.
And also maintain he V_T510 table, maintain your wage types to your group and level.
Good luck
Devi

Repeating group level headings.

Using the table wizard, I have created a "group above" table with two levels like this:
Group Level 1
Group Level 2
table_element_1 table_element_2 table_element_n
On the first page, both group level 1 and group level 2 print. As I get subsequent group level 2 breaks, the report won't repeat level 1 so I only get Group level 2 in my heading. The output is coming out like this:
Group Level 1
Group Level 2
table_element_1 table_element_2 table_element_n
Group Level 2a
table_element_1 table_element_2 table_element_n
Group Level 2b
table_element_1 table_element_2 table_element_n
I always want to repeat group level 1 in my table heading. Is there a an xml or template command that I can use to say "always print" ?
I'd like to see it like this:
Group Level 1
Group Level 2
table_element_1 table_element_2 table_element_n
Group Level 1
Group Level 2a
table_element_1 table_element_2 table_element_n
Group Level 1
Group Level 2b
table_element_1 table_element_2 table_element_n

Probably you are using tables to format it as each group.
so in-order to display the group level element 1 ,
You got to display that element before the second group table .
its like
<for-each:level1>
<GRP-LEVEL1-ELEMENT>
<for-each:level2>
<GRP-LEVEL2-ELEMENT>
..................something else
<end-for-each>
<end-for-each>
you can select the table and table properties, repeat as header row in top of every page
pass me your template and xml to fusionDOTobjectATgmailDOTcom.
i wll have a look at where you went wrong ;)

Reclassification package running on GNONE group level

Similar Messages

Maybe you are looking for