Recognise own file name

simple question, but probably not so simple answer.
Is there a way to get flash to recognise its own file name
i.e. 'image1.swf'

there are other ways to do this, but you can get it from the
_url property
var myswfname=unescape(String(_root._url.split("/").pop()));
trace(myswfname)

Similar Messages

Ecxpert Problem in getting the original file name submitted by FTP

hai,
when i use the scheduled FTP Application receive mode to receive files from the remote machine, i am not able to get the original file name, Ecxpert itself maintaining it's own file name,
Even i query the tracking table also i am not able to find the original filename.
If anybody know how i can able to get the original file name?
thanks....

I don't think there is an easy to capture this information. We ended up writing our own FTP tool so we could gather better data. The other problem we had seemed to be sporadic downloads from sites where setting Passive was required.

I am trying to find out how to assign files with particular extensions to the appropriate software. At the moment when I create a file using Word it is apparently given the extension .docx but Word doesn't recognise its own files. How do I alocate th

I am trying to find out how to assign files with particular extensions to the appropriate software. At the moment when I create a file using Word it is apparently given the extension .docx but Word doesn't recognise its own files. How do I allocate the extension .docx to Word? There used to be a way of doing it, I think under "Preferences" but I can't seem to find it.

Still in the same location:
File > Get Info > Open with (select) > Change All (button)

How can transfer the read file name via own developed adapter module

Hello experts,
I want to know how I can handle the following issue:
I developed a J2EE adapter module for the file adapter "sender" with the aim to read the file name of incoming files. Thereto I implement the following code like this:
public ModuleData process(ModuleContext mc, ModuleData md) throws
ModuleException
Hashtable mp = (Hashtable)
md.getSupplementalData("module.parameters");
String fileName = null;
if (mp != null)
fileName = (String) mp.get("FileName");
Now I get the filename which includes a order nr. I need this order number to call a RFC Adapter via mapping. So my question is how can transfer this order nr to the RFC adapter?
Kind regards,
Fatih

Hi,
>> to read the file name of incoming files
Use file adapter with Adapter specific identifiers selected.
>>Thereto I implement the following code like this:
use udf in message mapping and avoid module
>>Now I get the filename which includes a order nr. I need this order number to call a RFC Adapter via mapping. So my question is how can transfer this order nr to the RFC adapter?
use RFC Look up function in message mapping...
Is module so necessary in this case???
Regards
Suraj

Copy a file name to its own metadata

I am re-organizing a large database of images. I do want to rename all the files but I need to keep the original file name for future reference. Is there a way to copy the original file name to the metadata without having to do it by hand (one by one)? I'm using Photoshop CS2, Bridge or Lightroom with a Mac running on OSX 10.4.8 and enough ram.

I have Bridge CS2 and CS3 and for some reason the CS3 version has the "Preserve Filename..." checkbox grayed out and I cannot figure out why. I was also looking for a way to view the "Preserved Filename..." and the only way I could do this was by using Bridge CS2 (since it isn't working for me in CS3), going to rename the file I am trying to view the old name on, and select "Preserved Filename" under the dropdown menu. This is a huge hastle and for some reason Lightroom 1.0 does not have the capability of preserving filenames at all! The DAM capabilities of Lightroom truly need work, but it is a wonderful application nonetheless, and I use it now for everything and haven't needed to use Bridge since I got Lightroom.

Aperture does not recognise TIF files from Nikon CoolScan

The TIF files from my Coolscan are good in every other application, but Aperture does not recognise them. I've tried re-saving the TIFs as JPG and PDS but Aperture doesn't recognise any file generated from the TIF. Maybe it's something to do with the scanner driver? Any ideas how to load these files into Aperture?

You might check the color space that is assigned to the files. If you are using Nikon Scan software to manage your CoolScan, there is a preference for setting the color space of the saved file. FWIW, Nikon CoolScan .nef files are a 'raw' file, not camera raw, that was/is a Nikon proprietary format for their scans. If you use the Nikon Scan for image editing, the edits are non-destructive in saved files and can be adjusted by re-opening the file in NS. Adobe first made editing camera raw available in early 2003 and the Nikon format preceded that. Nikon's camera raw format also has the .nef extension, but is not the same as the CoolScan .nef-- really confusing. I suggested checking the color space, because Nikon has different internal names for Adobe RGB(1988) as well as their own Wide Gamut space.
All said, I've not had a problem opening .tif scan files in Aperture.

Can't search contents of files only file names.

I am really stuck guys. It's been aggrevating me for days. I tried to download 3rd party programs for searching in files and it still doesn't work. I checked the forums here and people only have trouble searching for kinds of files. Even when I use search strings like "contents" or "description" it still will only look for file names not contents.
It's frustrating because I am typing up my own personal book and I am in the process of fixing all the mistakes which requires searching by contents in my folder where my files are stored!
Thanks in advance!

I've tried various file types.
I tried adding my HD to the list and literally waited 1 minuted but to no avail.
The next step is probably reinstalling Snow Leopard, right?
By the way, I mostly use Finder for searching, so how would I enable the indexing there? Or is it only spotlight that has this indexing thing?

How do I make iTunes recognise album/ artist names?

I had to format my computer and so backed up my iTunes collection, all 25gb ripped with all correct information tags. I backed up my music using a program called syncback pro which backed up my files as I added them instead of using the iTunes backup.
When I set up my computer again and copied my music back into iTunes iTunes failed to recognise roughly 60-80% of my album titles and 10% of my artist tags whilst in the file directories everything is sound. I have compared 2 files from different albums. One with album titles and one without and there is no difference in either any file names or any tags in the file properties.
Also when I changed my windows media player directory to my iTunes then windows media player instantly recognised all of my music 100%.
I have tried reinstalling iTunes, changing the directory, importing through consolidation and also through selecting a folder. None of these work.
I have tried using other media players such as doubletwist and someother open source (foobar) but I encounter the same problems as i do with iTunes. Why could this be????
Any help would be greatly apprechiated!! thankyou!

My guess would be that the files in question have multiple tags and while other applications are reading the most complete set of data, iTunes is reading partial information. If you have the files in a sensible artist & album folder structure then my script TagFromFilename might help.
I take it you didn't preserve the iTunes Library.itl file from the old system. In future you should simply clone the entire iTunes folder structure to create a backup as this will preserve not only your media, but all the other infomation not stored in tags such as playcounts, ratings, playlists etc.
tt2

Insane XML Import, Huge Project, Duplicate file names work around...

I planned on kicking off my journey attempting to edit a massive multi year documentary on FCPX with a nice introduction of the blog I'm going to keep about the experience, but I've run into a bit of a roadblock, or maybe major speed bump at least before even getting to that point. I wanted to share what is working as a work around for me and you guys can tell me how I'm doing it wrong.
Ok, I will try to explain this as succinctly as possible. I'll write in somewhat stream of consciousness just to try and get through it quicker... Basically, after discovering the work around below, I am now utterly confused on how FCPX handles the relationship between its own database of where media is stored, and the actual media itself. I have plenty experience on FCPX now, probably done 30-40 pro commercial jobs on it over the last year since XML became doable as I'm also a Resolve Colorist and all the FCPX projects where hardcore coloring product spots. For commercial work, I never needed to worry about splitting up footage up over multiple Events. Everything, all in one, FCPX handled it no problem. (well the occasional beach ball, but that seems to be a thing with FCPX in general)
This will be my 10th feature documentary as an Editor. Every one before it was either on Avid's many flavors over the last 12 years or FCP Studio. When this new film came along, I made the decision a few months ago to use FCPX for a few reasons, but mostly because I'm insane and I like to try to mix it up for myself in a career that can get stale quick if you aren't willing to be that way. The film was shot over 2+ years, every shoot was multi cam 5D (yes i know, looks great, but please kill me), I haven't done the math on length, but there is over 10,000 clips of video (this is actually medium in size compared to what I've dealt with before). Its 5D, so theres external audio for everything. FCPX's syncing is great, but I've learned that theres an unsaid window of heads and tales clips must fall within to sync properly with the nearby clips, if they are too far apart FCPX gives up. One shoot day could have 3 cams, 50 clips each, and 2 audio files to sync to, FCPX simply cannot handle this, so off to Plural eyes they went, no problems.
Ok, all this is relevant eventually I swear! Again, in the past, all in one event, no problem. I tried for fun to bring all media into one Event on this film. It worked, but there is a 10+ second spinning beach ball for every single move you make, so thats no good. Ok, I'll separate the Events out to, lets say, each shoot month. Well that's dumb, in verite documentary, any shot could be the first, any shot could be the last, you need a command over all searchable footage at all times. Shift selecting all events to search *****, and it actually takes longer for FCP to reload each event each time than it does to just have the one massive one. So no go there. Next hair brained idea... What if make a new Event that is just Compound Clips of all the other Event's contents and do more with Markers and Favorites in logging that I was planning to parse it all out. That way I'm working with and FCPX is dealing with 50-60 clips instead of 10,000+ Quick test, Cmd-A, Opt-G, boom, boom, boom, move all to dedicated to Event, hide huge Event, BEHOLD, that works! FCPX chokes a little bit on the insane length of some of the clips, but searching, and general performance is back on par!
So your saying to yourself "Ok *********, sounds like you figured it out, what's the problem." Well to you I say, "Not so fast!" Remember, that was just a quick test using the media I had imported into the massive 10,000+ clip Event. To do this project proper, I am having to import Multicam sync'd XMLs from Plural Eyes. And this is where it all starts to fall apart. A little foreshadowing for your eager eyes. 10,000+ files all shot with multiple 5D's over the course of years. What does that mean? many, many duplicate file names!
FCPX as well all know irritatingly imports XML's as new Events, not into existing ones. This obviously takes a lot of burden off media management because with a new Event comes a new database referencing its own version of the raw media. All well and good, and I'm betting its starting to click for some if you advanced users where I'm finally going with this. So I have 50 or so XMLs to bring in, all done no problem. Now I want to replicate that singular Event like I did with the Compound Clip test and have it all in one place to be my master as extensive logging begins for easy searching once editing begins. Highlight the Events, click Merge Events. NOPE. I get a new "Kill Yourself Now" error (a term I coined for Out of Memory and General Error messages in FCP Legacy meaning there ain't much you can do about it): "Two or more files have the same name. Change the names and try again, because I don't know what the **** to do with them." Ok I made up that last part but that's basically what it's saying. Just take the variable out of the equation, this happens with every which way you could try to get the clips together. Merge Events, dragging events on top of each other, dragging just the Multicam clip alone, nothing gets passed that message. What's worse is that while Batch Renaming seems like a solution, the renames do not populate inside the created clips and there is no way to Batch Rename those. Renaming everything at the finder level isn't so great because then I'd have to resync and theres an offline/online thing going here where the film has to be reconformed eventually.
Basically, I've found that FCPX handles media management in completely different ways depending on whether you are importing into one Event yourself or doing essentially what is a new import with FCPX moving or merging Events. If you bring in all the media to one Event, on a macro level FCPX goes through file by file making aliases referencing the master file. If it hits a duplicate, it makes a parenthesis counter, and keeps going. And with the genius of FCPX metadata, that file name doesn't even matter, you can change it at the Finder level and FCPX will keep the link intact. BUT for some reason if you try to do this outside the realm of a single Event and combine files after the fact a different process takes over in creating this database system and can't handle the duplicates. I can't totally figure the reason other than it probably is scared to change the originally referenced alias to something else (which it shouldn't be scared of since Merge Events deletes the original anyway).
This is where it gets INSANE and where I lose all understanding of what is going on, and believe me it was a delicate understanding to begin with. It comes in to play with the work around I figured out. I make the master Event with the 10,000+ clips. Then I import all the XMLs as dedicated Events. Now, I then drag the Multicam clips into the master Event, it WORKS! just takes it, no "Kill Yourself Now" error. Stranger still, now with the switched referenced Event, it even takes into account which aliased duplicate file name it's referencing in the Original Media folder. Somehow, it's taking into account the original file path and saying "Ok, I see 5 instances of MVI_5834.mov. Based on the original file path or maybe creation date or god knows what, it must be MVI_5834 (fcp3).mov." It connects perfectly. I can even remove the old XML imported Event with no problem. Crazier yet, I can now move those again to the dedicated Event I wanted originally that only contains those Multicam or Compound Clips.
So instead of going straight from A to C, going from A to B to C works even though that actually seems way more complicated. Why can't FCPX handle Merge Events and dragging clips the same way it handles media imported into a single Event. And weirder still, why can't FCPX handle the (fcp1,2,3...) appending in the same scenario. But if the appended links are already there, No Problem. And for the love of god, it'd be nice to important XML's into existing Events and make the correct referencing happen right from the get go, which is really the source of all the above headache. I'd have no problem helping FCPX with a little manual pointing in the right direction just like any other NLE needs.
Ok, having said all of that crap above, my question is, have I missed something completely simple I should have done instead? Now that I have everything in place how I originally envisioned, I think I will still play around a little bit more to make sure FCPX is really going to be able to handle this project. I'm at a stage right now where going another direction is still an option, although the dare devil in me wants to make this work. Media management aside, once you start editing on a FCPX timeline, its hard to go back to anything else. Apple is going to have to figure out some way not to access to everything at all times to work fluidly or big projects like this are never going to be practical in FCPX.
Sorry for the long confusing post....

I'm having the exact same problem, but I know nothing of ruby scripts. I've exhausted my resources with tech support, and after literally hours of work with them it seems I now am faced with either re-rating each individual song, or pointing iTunes to each song that it can't locate. Is yours a solution that could help me? How can I find out more about Ruby Scripts? Thanks for your help, hellolylo (or anyone else who might also be able to help...)
Kenn

How can I remove the list of 20 recently saved items when you click on the arrow on the far right side of the File Name screen for images, web pages, ect?

When I right click and go save image/page/ect as the file save popup screen appears and on the right side of the File Name bar there is an arrow. If you click the arrow it shows the last 20? items that have been saved and their save location. Is there anyway to not have the list of recent items there or at the very least a way to clear them? I'm running Firefox 17 on Windows 7.
Also when you save items as you were typing in the name you want to save them as it used to show filenames with the same name as you type that are saved in that directory so instead of typing the whole filename or copy/pasting you could start typing a filename and then hit the up or down arrow, backspace and just change the end of the filename without having to retype the entire filename.
Hopefully you understand what I mean and can help me fix it, thanks.

It's in the proper directory. I can scroll down the window on the right and see the files but if I start typing the file name of one of them the autocomplete drop down thing that shows matching file names does not appear. In the back of my mind I'm starting to think a setting got changed and then the list of matching file names stopped appearing but I can't recall what setting may have been changed, if it was a firefox or microsoft change or for certain if anything got changed at all. Yeah I know I'm not helping my own cause but what can you do.

How can I create my own tag name while creating a partition table.

I have X4500 running Solaris 10. I have formatted a disk and created partition table as given below.
Specify disk (enter its number): 0
selecting c0t0d0
[disk formatted]
/dev/dsk/c0t0d0s0 is part of active ZFS pool zpool1. Please see zpool(1M).
FORMAT MENU:
disk - select a disk
type - select (define) a disk type
partition - select (define) a partition table
current - describe the current disk
format - format and analyze the disk
fdisk - run the fdisk program
repair - repair a defective sector
label - write label to the disk
analyze - surface analysis
defect - defect list management
backup - search for backup labels
verify - read and display labels
inquiry - show vendor, product and revision
volname - set 8-character volume name
!<cmd> - execute <cmd>, then return
quit
format> partition
PARTITION MENU:
0 - change `0' partition
1 - change `1' partition
2 - change `2' partition
3 - change `3' partition
4 - change `4' partition
5 - change `5' partition
6 - change `6' partition
select - select a predefined table
modify - modify a predefined partition table
name - name the current table
print - display the current table
label - write partition map and label to the disk
!<cmd> - execute <cmd>, then return
quit
partition> print
Current partition table (original):
Total disk sectors available: 1953508749 + 16384 (reserved sectors)
Part Tag Flag First Sector Size Last Sector
0 usr wm 34 4.00GB 8388641
1 usr wm 8388642 2.00GB 12582945
2 usr wm 12582946 200.00GB 432013345
3 usr wm 432013346 175.00GB 799014945
4 usr wm 1166180386 375.43GB 1953508748
5 usr wm 799014946 175.00GB 1166016545
6 usr wm 1166016546 80.00MB 1166180385
8 reserved wm 1953508749 8.00MB 1953525132
partition>
I am unable to specify my own tag name. How can I change the tag name to one of my interest.
I need to create 3 partitions as told below
partitions:
/earth
/mars
/work
/earth and /work should be roughly equal in size, /mars should be twice the size of the others, if that is possible. If not 3 partitions of equal size will do.
Please, help me .
Thank you.

Exactly 1TB? Slightly under/slightly over?
Traditional Solaris disk labels are in VTOC format, but this format cannot describe disks larger than 1TB. So EFI labels must be used on disks larger than 1TB. Setup is slightly different.
Are these physical disks or LUNs from a SAN array? If they are array LUNS, it is often the case that they don't have a Sun label of any type. So...
#1 Apply a Solaris label
If the LUNS don't have a label (when selected in 'format', it gives a warning that no label is present and offers to apply a label immediately). When run non-interactively, format assumes "yes" for any questions. So all you'd have to do is select every disk to have it apply labels to any unlabled disk. Run 'format' once and find the highest number (maybe it's 50 for you). Create a text file that looks like this:
disk 1
disk 2
disk 3
disk 50Then feed that to format like this:
# format -f /tmp/disklist or whatever you've named the file.
#2 Apply the partition layout to all disks you want.
You asked if you should do the same procedure, but I don't see that you've actually done anything above other than print out the existing layout. Take one of your 48 drives and partition it the way you want manually (set the slices to the sizes that you want). Then you can copy the layout of that disk to others. You only want to do this between disks/LUNs of the same size. As an example, if you've explicitly partitioned c1t0d0 and you want to apply this to c1t1d0, do this:
# prtvtoc /dev/rdsk/c1t0d0s2 | fmthard -s - /dev/rdsk/c1t1d0s2Repeat for all of your other disks.
Darren

Can't seem to get my own domain name to work

First of all I'm sure this has been asked a lot so apologies if it's a repetitive post I'm just at the hair pulling stage!
Well. I've had no issues joining mobile me (joined a week ago) and publishing my site from iWeb.
But then I wanted to get my own domain name.
(i got it from 123-reg.co.uk just in case that is is anyway significant.)
This is where my question becomes a bit "Balloon" shaped.
When setting my CName on 123-reg I was asked to enter info into two boxes. (That seemed to tally with the help files I have read.)
I entered web.me.com into the first box and my domain name into the second. I'll just call it for now www.mywebsite.co.uk
Then it asked me to enter my website IP which I located by using one of those pages you can type a domain into and it searches...
Sorry if this is dumb but does that sound about right?
Some questions-
-Is it correct to put www.mywebsite.co.uk as well as web.me.com or should it be something else?
-Would there be any mobile-me issues while I'm still on the free trial?
-Are some domain name providers incompatible with mobile-me?
-And if I change the CName with the registrar should I delete and reconfigure myown domain in my mobile me-account?
If anyone could enlighten me they would basically be my new hero!
Thanks.

Oh one more thing..
When asked for the IP of your website does that mean the IP of your own website or the host (being Mobileme of course? i.e. the IP of www.web.me.com/mywebsitetemporaryname or me.com?

"not a valid short file name" and "invalid character" install errors

Disclaimer: Apple does not necessarily endorse any suggestions, solutions, or third-party software products that may be mentioned in the topic below. Apple encourages you to first seek a solution at Apple Support. The following links are provided as is, with no guarantee of the effectiveness or reliability of the information. Apple does not guarantee that these links will be maintained or functional at any given time. Use the information below at your own discretion.
Symptoms
While upgrading or uninstalling a Windows software application (such as iTunes for Windows or QuickTime for Windows), you may receive one of the following error messages:
file name is not a valid short file name
The folder path 'folder name' contains an invalid character.
... where file name could be the name of any file, and folder name could be the name of any folder.
In the case of software that uses advertised shortcuts (such as recent versions of iTunes for Windows or Safari for Windows), the messages may also appear when attempting to launch software that has already been installed.
Resolution
The error messages are usually caused by damage to the installation database for the application. Clearing the installation database for the application by using the Windows Installer CleanUp utility can usually get you past the error message.
(1) Click [here|http://support.microsoft.com/kb/290301] first, and read the important information about the utility.
(2) Click the *Download the Windows Installer Cleanup Utility package now* link on that page to download a file titled msicuu2.exe.
(3) Open the msicuu2.exe file and follow the prompts to install it.
(4) In your Start menu click *All Programs* and then click *Windows Install Clean Up.* The Windows Installer CleanUp utility window appears, listing software that is currently installed on your computer.
(5) Select the software you're getting the "not a valid short file name" or "invalid character" message for from the list and click Remove.
(6) Click OK in the confirmation dialog that appears.
(7) If you have multiple entries for the software you're getting the "not a valid short file name" or "invalid character" message for, repeat steps 5 and 6 for the other entries for the software.
(8) Click Exit.
(9) Restart the computer.
If you were getting the "not a valid short file name" or "invalid character" message when trying to upgrade or launch software, now try reinstalling the latest version of the software.
If you were getting the "not a valid short file name" or "invalid character" message when just trying to uninstall software, program files for the software in question will remain on the PC after it has been removed by the Windows Installer CleanUp utility. If you want to remove leftover program files, check in at the appropriate forum at [Apple Discussions|http://discussions.apple.com/index.jspa?categoryID=1] and ask which files can be safely removed.
This is the 1st version of this tip. It was submitted on March 24, 2010 by b noir.
Do you want to provide feedback on this User Contributed Tip or contribute your own? If you have achieved Level 2 status, visit the User Tips Library Contributions forum for more information.

Go to Microsoft website to fix installer file problems.
Click "Run now" from Fix it to remove all iTunes & related installer files:
http://support.microsoft.com/mats/Program_Install_and_Uninstall
Be aware that Windows Installer CleanUp Utility will not remove the actual program from your computer. However, it will remove the installation files so that you can start the installation, upgrade, or uninstall over.
Download and Install iTunes

Office Web Apps Attachment Preview Fails When Capital Letter in File Name Extension

It appears that when we send any attachments that contain a capital letter in the filename extension, and try previewing the attachment from within Outlook Web Access, the server returns an Internal Server Error 500 with the following response:
{"Body":{"ErrorCode":500,"FaultMessage":"The process failed to get the correct properties.","IsTransient":false,"StackTrace":"Microsoft.Exchange.Data.Storage.ObjectNotFoundException: The process failed to get the correct properties. ---> Microsoft.Mapi.MapiExceptionNotFound: MapiExceptionNotFound: Unable to get properties on object. (hr=0x8004010f, ec=-2147221233)\u000aDiagnostic context:\u000a Lid: 55847 EMSMDBPOOL.EcPoolSessionDoRpc called [length=657]\u000a Lid: 43559 EMSMDBPOOL.EcPoolSessionDoRpc returned [ec=0x0][length=238][latency=0]\u000a Lid: 52176 ClientVersion: 15.0.913.22\u000a Lid: 50032 ServerVersion: 15.0.913.6020\u000a Lid: 23226 --- ROP Parse Start ---\u000a Lid: 27962 ROP: ropOpenMessage [3]\u000a Lid: 17082 ROP Error: 0x8004010F\u000a Lid: 26977 \u000a Lid: 21921 StoreEc: 0x8004010F\u000a Lid: 27962 ROP: ropExtendedError [250]\u000a Lid: 1494 ---- Remote Context Beg ----\u000a Lid: 50428 \u000a Lid: 59416 StoreEc: 0x8004010F\u000a Lid: 38536 \u000a Lid: 10786 dwParam: 0x0 Msg: 15.00.0913.000:exchange-01\u000a Lid: 1750 ---- Remote Context End ----\u000a Lid: 27962 ROP: ropGetPropsSpecific [7]\u000a Lid: 17082 ROP Error: 0x4B9 \u000a Lid: 26465 \u000a Lid: 21921 StoreEc: 0x4B9 \u000a Lid: 31418 --- ROP Parse Done ---\u000a Lid: 22753 \u000a Lid: 21817 ROP Failure: 0x4B9 \u000a Lid: 20385 \u000a Lid: 28577 StoreEc: 0x8004010F\u000a Lid: 32001 \u000a Lid: 29953 StoreEc: 0x8004010F\u000a Lid: 32768 \u000a Lid: 33024 StoreEc: 0x8004010F\u000d\u000a at Microsoft.Mapi.MapiExceptionHelper.InternalThrowIfErrorOrWarning(String message, Int32 hresult, Boolean allowWarnings, Int32 ec, DiagnosticContext diagCtx, Exception innerException)\u000d\u000a at Microsoft.Mapi.MapiExceptionHelper.ThrowIfError(String message, Int32 hresult, IExInterface iUnknown, Exception innerException)\u000d\u000a at Microsoft.Mapi.MapiProp.GetProps(ICollection`1 propTagsRequested)\u000d\u000a at Microsoft.Exchange.Data.Storage.MapiPropertyBag.GetProperties(IList`1 propertyDefinitions)\u000d\u000a --- End of inner exception stack trace ---\u000d\u000a at Microsoft.Exchange.Data.Storage.MapiPropertyBag.GetProperties(IList`1 propertyDefinitions)\u000d\u000a at Microsoft.Exchange.Data.Storage.StoreObjectPropertyBag.InternalLoad(ICollection`1 extraProperties)\u000d\u000a at Microsoft.Exchange.Data.Storage.StoreObjectPropertyBag..ctor(StoreSession session, MapiProp mapiProp, ICollection`1 autoloadProperties, Boolean canSaveOrDisposeMapiProp)\u000d\u000a at Microsoft.Exchange.Data.Storage.StoreObjectPropertyBag..ctor(StoreSession session, MapiProp mapiProp, ICollection`1 autoloadProperties)\u000d\u000a at Microsoft.Exchange.Data.Storage.ItemBuilder.CoreItemBind(StoreSession session, StoreId storeId, MapiMessageCreator mapiMessageCreator, ItemBindOption itemBindOption, ICollection`1 propertiesToLoad, StoreObjectType& storeObjectType)\u000d\u000a at Microsoft.Exchange.Data.Storage.ItemBuilder.ItemBind[T](StoreSession session, StoreId storeId, Schema expectedSchema, MapiMessageCreator mapiMessageCreator, ItemBindOption itemBindOption, ICollection`1 propertiesToLoad)\u000d\u000a at Microsoft.Exchange.Data.Storage.Item.Bind(StoreSession session, StoreId storeId, ItemBindOption itemBindOption, ICollection`1 propsToReturn)\u000d\u000a at Microsoft.Exchange.Services.Core.ServiceCommandBase.GetXsoItem(StoreSession session, StoreId id, PropertyDefinition[] properties)\u000d\u000a at Microsoft.Exchange.Services.Core.Types.IdConverter.CorrectIdForObjectType(StoreSession session, StoreObjectId objectId, StoreObjectType deserializedObjectType, Item& cachedItem)\u000d\u000a at Microsoft.Exchange.Services.Core.Types.IdConverter.CreateStoreObjectId(StoreSession session, Byte[] storeObjectIdBytes, StoreObjectType objectType, IdProcessingInstruction idProcessingInstruction, BasicTypes expectedType, ConvertOption convertOption, Item& cachedItem)\u000d\u000a at Microsoft.Exchange.Services.Core.Types.IdConverter.CreateAppropriateStoreIdType(StoreSession session, IdHeaderInformation idHeaderInformation, String changeKey, ConvertOption convertOption, BasicTypes expectedType, Item& cachedItem)\u000d\u000a at Microsoft.Exchange.Services.Core.Types.IdConverter.ConvertId(CallContext callContext, IdHeaderInformation headerInformation, ConvertOption convertOption, BasicTypes expectedType, List`1 attachmentIds, String changeKey, Int32 hashCode, Boolean unifiedLogon, Item& cachedItem)\u000d\u000a at Microsoft.Exchange.Services.Core.Types.IdConverter.ConvertId(CallContext callContext, IdHeaderInformation headerInformation, ConvertOption convertOption, BasicTypes expectedType, List`1 attachmentIds, String changeKey, Int32 hashCode, Boolean unifiedLogon)\u000d\u000a at Microsoft.Exchange.Services.Core.Types.IdConverter.ConvertId(CallContext callContext, IdHeaderInformation headerInformation, ConvertOption convertOption, BasicTypes expectedType, List`1 attachmentIds, String changeKey, Int32 hashCode)\u000d\u000a at Microsoft.Exchange.Services.Core.Types.IdConverter.ConvertAttachmentIdToIdAndSessionReadOnly(String itemId)\u000d\u000a at Microsoft.Exchange.Clients.Owa2.Server.Core.GetWacAttachmentInfo.GetIdAndSession(CallContext callContext, String ewsAttachmentId)\u000d\u000a at Microsoft.Exchange.Clients.Owa2.Server.Core.GetWacAttachmentInfo.Execute(String ewsAttachmentId, Boolean isEdit, String draftId, CallContext callContext)\u000d\u000a at Microsoft.Exchange.Clients.Owa2.Server.Core.GetWacIframeUrl.InternalExecute()\u000d\u000a at Microsoft.Exchange.Services.Wcf.ServiceCommand`1.DetectDuplicatedCallOrExecute()\u000d\u000a at Microsoft.Exchange.Services.Wcf.ServiceCommand`1.Execute()\u000d\u000a at Microsoft.Exchange.Clients.Owa2.Server.Core.OWAService.GetWacIframeUrl(String attachmentId)\u000d\u000a at SyncInvokeGetWacIframeUrl(Object , Object[] , Object[] )\u000d\u000a at System.ServiceModel.Dispatcher.SyncMethodInvoker.Invoke(Object instance, Object[] inputs, Object[]& outputs)\u000d\u000a at System.ServiceModel.Dispatcher.DispatchOperationRuntime.InvokeBegin(MessageRpc& rpc)\u000d\u000a at System.ServiceModel.Dispatcher.ImmutableDispatchRuntime.ProcessMessage5(MessageRpc& rpc)\u000d\u000a at System.ServiceModel.Dispatcher.ImmutableDispatchRuntime.ProcessMessage31(MessageRpc& rpc)\u000d\u000a at System.ServiceModel.Dispatcher.MessageRpc.Process(Boolean isOperationContextSet)"}}
This happens on the network call for:
https://exchange.mydomain.com/owa/[email protected]/service.svc?action=GetWacIframeUrl&ID=-2&AC=1
I have tried with varying attachment file names and it consistently only happens if there is a capital in the extension. For example:
.pdf - Works
.PDF - does not work
.Pdf - does not work
.pDf - does not work
It also seems to happen across document types, PDF, DOCX, XLSX, etc. So that doesn't seem to be dependent either.
Anyone run into this before or is there a KB article or a setting that I am missing somewhere that explains how to resolve this?Thanks!

By default, there are 8 bindings for DOCX. Do you see any other bindings available?
Trevor Seward, MCC
Follow or contact me at...
&nbsp&nbsp
This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

Automator: Create folder from suffix of filename and put file names with same suffix into folder

I've been using a script to use automator to create a folder from the filename and put that file into it the folder just created.
I have a bunch of files that have similar names to them, but I don't want every file to be put into its own folder, instead I want all files with the same suffix (001) to go into the same folder. I would also like the folder name to just be named the same as the suffix (001) instead of the full file name.
For example all of these files names that end with the same integer (001) should be dumped into the same folder named "001":
Boston_ProRes422_1920x1080_24p_Audio_001
Boston_ProRes422_3840x2160_24p_Audio_001
Boston_ProRes422_3840x2160_24p_RAW_Audio_001
Boston_ProRes422_1920x1080_24p_Audio_002
Boston_ProRes422_1920x1080_24p_Audio_005
Boston_ProRes422_1920x1080_24p_Audio_010
Any help at all would be incredible!!
Thanks!
Here's the script I'm using right now:
on run {input, parameters} -- create folders from file names and move
set output to {} -- this will be a list of the moved files
repeat with anItem in the input -- step through each item in the input
set {theContainer, theName, theExtension} to (getTheNames from anItem)
try
set destination to (makeNewFolder for theName at theContainer)
tell application "Finder"
move anItem to destination
set the end of the output to the result as alias -- success
end tell
on error errorMessage -- duplicate name, permissions, etc
log errorMessage
# handle errors if desired - just skip for now
end try
end repeat
return the output -- pass on the results to following actions
end run
to getTheNames from someItem -- get a container, name, and extension from a file item
tell application "System Events" to tell disk item (someItem as text)
set theContainer to the path of the container
set {theName, theExtension} to {name, name extension}
end tell
if theExtension is not "" then
set theName to text 1 thru -((count theExtension) + 2) of theName -- just the name part
set theExtension to "." & theExtension
end if
return {theContainer, theName, theExtension}
end getTheNames
to makeNewFolder for theChild at theParent -- make a new child folder at the parent location if it doesn't already exist
set theParent to theParent as text
if theParent begins with "/" then set theParent to theParent as POSIX file as text
try
return (theParent & theChild) as alias
on error errorMessage -- no folder
log errorMessage
tell application "Finder" to make new folder at theParent with properties {name:theChild}
return the result as alias
end try
end makeNewFolder

Thanks Neil for the response! That script didn't work, but I did get it to work with my old script by changing "set TheName to" numbers different. Here's my final script which creates folders named "001", "002", and so forth and dumps in the files that end in that same suffix in the matching folder.
on run {input, parameters} -- create folders from file names and move
set output to {} -- this will be a list of the moved files
repeat with anItem in the input -- step through each item in the input
set {theContainer, theName, theExtension} to (getTheNames from anItem)
try
set destination to (makeNewFolder for theName at theContainer)
tell application "Finder"
move anItem to destination
set the end of the output to the result as alias -- success
end tell
on error errorMessage -- duplicate name, permissions, etc
log errorMessage
# handle errors if desired - just skip for now
end try
end repeat
return the output -- pass on the results to following actions
end run
to getTheNames from someItem -- get a container, name, and extension from a file item
tell application "System Events" to tell disk item (someItem as text)
set theContainer to the path of the container
set {theName, theExtension} to {name, name extension}
end tell
if theExtension is not "" then
set theName to text -5 thru -((count theExtension) + 4) of theName -- just the name part
set theExtension to "." & theExtension
end if
return {theContainer, theName, theExtension}
end getTheNames
to makeNewFolder for theChild at theParent -- make a new child folder at the parent location if it doesn't already exist
set theParent to theParent as text
if theParent begins with "/" then set theParent to theParent as POSIX file as text
try
return (theParent & theChild) as alias
on error errorMessage -- no folder
log errorMessage
tell application "Finder" to make new folder at theParent with properties {name:theChild}
return the result as alias
end try
end makeNewFolder

Recognise own file name

Similar Messages

Maybe you are looking for