Recommendations for gain staging when running through a PA

I'm using iTunes to play mp3's through our PA (presonus 16.4.2) at church. curious on gain staging recomendations.
Computer volume?
Itunes volume?
Thank you

Sorry, I didn't see your reply before.
I think the problem could be that you specify No_Replace. This means that [Oracle Forms will keep the default menu module of the calling form active for the called form|http://www.oracle.com/webapps/online-help/forms/10g/topics/f1_help/builta_c/callform.html?tp=true].
You should look into using the FORMS_PATH variable instead of using the full path to the form, it's not essential but it's more flexible. On earlier versions this is FORMS90_PATH, FORMS60_PATH etc, and is set in the .ENV file (assuming you're on webforms).

Similar Messages

HT204291 how do get the media icon for mac mirroring when running airplay on itunes?

how do get the media icon for mac mirroring when running airplay

Airplay mirroring requires a Mac from 2011 or later, running OSX 10.8 (or later)
http://support.apple.com/kb/HT5404?viewlocale=en_US&locale=en_US

SQR variable to repoint where sqrw when running through Proces Scheduler

I recently zipped a PSHOME and unzipped in a new location. When running SQR the path to pssqr.exe is still the old PSHOME path. Does anyone know where this parameter is being picked up?
SQR Command = d:\pt8.51\bin\sqr\ORA\binw\sqrw paramters

When running locally this is defined in the configuration manager.
When running through the process scheduler, this is de fined in the process scheduler configuration.

How to capture error messages for BCP when running through XP_CMDSHELL

XP_cmdshell returns 0 as success when running BCP that causes insertion failure for any records (failure because of truncation, data type mismatch etc.)
One way is to capture output message in temp table and can parse the messages. but I am looking for some direct methods.

Hi Naveen Raikwar,
We can use insert/execute syntax to insert error output to a file, here is a good article, please see:
http://www.sqlservercentral.com/articles/Error+Handling/69196/
And here is a similar thread, please refer to:
http://social.msdn.microsoft.com/Forums/en-US/sqltools/thread/b37ec1fd-ea2f-4546-93c1-8bb9d589710d
Thanks,
Eileen
Eileen Zhao
TechNet Community Support

Unable to open PDF document when run through task/workflow

Hi all,
I am currently usign a background method to send a smartform as a PDF document to all the agents who approve.
When i send the smartform in mail as a PDF documetn throught the task i get an error message when opening the PDF document which says that 'The file could nto be opened because it was either not a supported file type or because the file was damaged(for example, it was sent as an email attachment and wasn't decoded correectly'.
The below is the code i am using to send the smartform
{ CALL FUNCTION 'SSF_FUNCTION_MODULE_NAME'
    EXPORTING
      formname           = 'ZFI_ASSET_PDA_NOTIF'
    IMPORTING
      fm_name            = lv_form_name
    EXCEPTIONS
      no_form            = 1
      no_function_module = 2
      OTHERS             = 3.
IF sy-subrc NE 0.
    MESSAGE ID sy-msgid TYPE 'S' NUMBER sy-msgno
    WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.}
{ ls_ctrlop-getotf    = 'X'.
ls_ctrlop-no_dialog = ''.
ls_compop-tdnoprev = 'X'.
ls_ctrlop-DEVICE = 'LOCL'.
ls_ctrlop-preview   = 'X'.
ls_ctrlop-no_dialog = 'X'.}
CALL FUNCTION lv_form_name
    EXPORTING
      control_parameters = ls_ctrlop
      output_options     = ls_compop
      user_settings      = 'X'
      gv_prctr_txt       = gv_prctr_txt
      gv_cc_text         = gv_cc_text
      gv_class_txt       = gv_class_txt
      gv_lname           = gv_lname
      gv_fname           = gv_fname
      gv_position        = gv_position
      gv_initiator       = gv_initiator
      gv_bookcost        = gv_bookcost
      gv_bookvalue       = gv_bookvalue
      gv_date            = gv_date
      gv_prctr           = gv_prctr
      gs_anla            = gs_anla
      gv_emv             = gv_emv
      gv_cond            = gv_cond
      gv_operable        = gv_operable
      gv_action          = gv_action
      gv_justify         = gv_justify
      gv_replace         = gv_replace
      gv_replace_comment = gv_replace_comment
      gv_process         = gv_process
    IMPORTING
      job_output_info    = lt_job_output
    EXCEPTIONS
      usage_error        = 1
      system_error       = 2
      internal_error     = 3
      OTHERS             = 4.
IF sy-subrc <> 0.
    MESSAGE ID sy-msgid TYPE 'S' NUMBER sy-msgno
            WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
LOOP AT lt_job_output-otfdata INTO ls_otf.
    lt_otf = ls_otf.
    APPEND lt_otf.
    CLEAR lt_otf.
ENDLOOP.
CALL FUNCTION 'CONVERT_OTF'
    EXPORTING
      format                = 'PDF'
      max_linewidth         = 132
    IMPORTING
      bin_filesize          = lv_len_in
    TABLES
      otf                   = lt_otf
      lines                 = lt_tline
    EXCEPTIONS
      err_max_linewidth     = 1
      err_format            = 2
      err_conv_not_possible = 3
      OTHERS                = 4.
Fehlerhandling
IF sy-subrc EQ 0.
ENDIF.
LOOP AT lt_tline.
    TRANSLATE lt_tline USING '~'.
    CONCATENATE ls_buffer lt_tline INTO ls_buffer.
ENDLOOP.
TRANSLATE ls_buffer USING '~'.
append ls_buffer TO lt_objbin.
DATA lv_counter         TYPE i.
DO.
    lt_record = ls_buffer.
    APPEND lt_record.
    SHIFT ls_buffer LEFT BY 255 PLACES.
    IF ls_buffer IS INITIAL.
      EXIT.
    ENDIF.
ENDDO.
Attachment
REFRESH:
lt_reclist,
lt_objtxt,
lt_objbin,
lt_objpack.
CLEAR ls_objhead.
lt_objbin[] = lt_record[].
lt_objhex[] = lt_record[].
CLEAR lv_descp.
CONCATENATE 'Asset'
              gs_anla-anln1
              'Approval details'
         INTO lv_descp
SEPARATED BY space.
Create Message Body
Title and Description
CONCATENATE 'Please find attached the approval details of asset : '
               gs_anla-anln1
          INTO lv_mail_descp
         SEPARATED BY space .
lt_objtxt = lv_mail_descp.
APPEND lt_objtxt.
CLEAR lv_mail_descp .
appending space lines into text of mail.
DO 3 times.
CLEAR lt_objtxt.
APPEND lt_objtxt .
ENDDo.
CONCATENATE 'This is an automatically generated message.'
             'Please do not reply to this mail.'
       INTO lv_mail_descp
     SEPARATED BY space .
lt_objtxt = lv_mail_descp.
APPEND lt_objtxt.
DESCRIBE TABLE lt_objtxt LINES lv_lines_txt.
READ     TABLE lt_objtxt INDEX lv_lines_txt.
ls_doc_chng-obj_name = 'smartform'.
ls_doc_chng-expiry_dat = sy-datum + 10.
ls_doc_chng-obj_descr = lv_descp.
ls_doc_chng-sensitivty = 'F'.
ls_doc_chng-doc_size = ( lv_lines_txt - 1 ) * 255 + STRLEN( lt_objtxt ) .
Main Text
wa_doc_chng-doc_size = ( v_lines_txt - 1 ) * 255 + strlen( i_objtxt ).
CLEAR lt_objpack-transf_bin.
lt_objpack-head_start = 1.
lt_objpack-head_num = 0.
lt_objpack-body_start = 1.
lt_objpack-body_num = lv_lines_txt.
lt_objpack-doc_type = 'RAW'.
    lt_objpack-doc_type = 'TXT'.
APPEND lt_objpack.
Attachment
(pdf-Attachment)
lt_objpack-transf_bin = 'X'.
lt_objpack-head_start = 1.
lt_objpack-head_num   = 0.
lt_objpack-body_start = 1.
DESCRIBE TABLE lt_objbin LINES lv_lines_bin.
READ TABLE lt_objbin INDEX lv_lines_bin.
lt_objpack-doc_size = ( lv_lines_bin - 1 ) * 255 + STRLEN( lt_objbin ) .
lt_objpack-body_num = lv_lines_bin.
lt_objpack-doc_type = 'PDF'.
lt_objpack-obj_name = 'ATTACHMENT'.
lt_objpack-obj_descr = lv_descp.
APPEND lt_objpack.
LOOP AT t_mail_addr.
    CLEAR lt_reclist.
    lt_reclist-receiver = t_mail_addr-mailid.
    lt_reclist-rec_type = 'U'.
    APPEND lt_reclist.
ENDLOOP.
IF t_mail_addr[] IS INITIAL.
    CLEAR lt_reclist.
    lt_reclist-receiver = mail id.
    lt_reclist-rec_type = 'U'.
    APPEND lt_reclist.
ENDIF.
CALL FUNCTION 'SO_NEW_DOCUMENT_ATT_SEND_API1'
    EXPORTING
      document_data              = ls_doc_chng
      put_in_outbox              = 'X'
      commit_work                = 'X'
    TABLES
      packing_list               = lt_objpack
      object_header              = ls_objhead
      contents_bin               = lt_objbin
      contents_txt               = lt_objtxt
      receivers                  = lt_reclist
     CONTENTS_HEX                = lt_objbin
    EXCEPTIONS
      too_many_receivers         = 1
      document_not_sent          = 2
      document_type_not_exist    = 3
      operation_no_authorization = 4
      parameter_error            = 5
      x_error                    = 6
      enqueue_error              = 7
      OTHERS                     = 8.
DATA: l TYPE sy-subrc.
l = sy-subrc.
When i run the above code in Se38, I get an email with a attachment that i am able to open. The problem seems to be with user WF_BATCH.
I have already checked all the existing threads on this. I did this coding as per one of the SDN threads itself.
I am able to open the PDF attachment even when i test the method. The problem is only when it is run through a task/workflow.
Please advice.
Thanks and Regards,
Soumya Gayatri.
Edited by: Soumya Gayatri on Apr 14, 2009 8:40 PM
Edited by: Soumya Gayatri on Apr 14, 2009 8:44 PM
Edited by: Soumya Gayatri on Apr 14, 2009 8:45 PM
Edited by: Soumya Gayatri on Apr 14, 2009 8:47 PM
Edited by: Soumya Gayatri on Apr 14, 2009 8:47 PM

Hello,
You should see an "Edit" in the top right of your post, you can use that to edit it.
As I said, use before and after the coding, but without the spaces (after "{" and before "}" ).
Try it!
Testing:
this is code
regards
Rick Bakker
Hanabi Technology

Query not showing detailed result when run through query Designer or Portal

Hi,
There is one query which not showing detailed result while running through Query Designer or run in Portal.
But strange thing is that it is showing the detailed result when i run it through BeX Analyzer.
While all the other queries don't have this problem in system. All showing the correct detailed result.
If anyone have some idea on this issue plz let me know.
Regards,
Javed
Edited by: Javed Akhtar on Jul 7, 2009 3:59 PM

Hi,
We can do this setting in WAD. Please check the web template and try to remove that setting. When you have hierarchy then we can display only till certain level in portal, this setting is done in web template APIs, but in bex analyzer you can see all the detailed information.
Edited
Go through this thread for some more detailed information
http://help.sap.com/saphelp_nw2004s/helpdata/en/44/7b5f0a95ce12d0e10000000a422035/frameset.htm
Regards,
rik

Performance slowdown when running through report server

There is a considerable difference between running a particular report through the report server. It is slower than when run directly from ReportBuilder.
Each points to the same data/application server. There is very little formatting or other work required of the client.
The difference is about 10-fold, i.e. a report taking 1 minute to run via ReportBuilder takes about 10 minutes when launched through the report server.
I have no idea how to begin diagnosing this. Our DBA says it is possible for the 'explain plan' to differ because the SQL is contained within the .REP file (and not as a stored procedure in the database). Even so, how/where would one begin looking to discover the reason for the dramatic performance difference?
Performance monitors on both the app/database server and the Oracle engine show that the slow running report consumes about the same amount of resources as the faster report. The slower report simply takes 10 times as long to run.
Perhaps we're not looking at the 'best' performance monitor parameters?
Anything else we can use to trace execution differences?

When we get this we try the following.
The dba's have some tool which can view the sql running under the server and the builder - you can then see if the plan is different.
Ordering - if there is a lot of ordering we get the SQL to pre order using the ORDER BY clause, this means the IAS server has less work to do (depending on your PC we find a PC is always quicker at formatting than the server).
Userlogon - we have a different user logon to that used by the server, this sometimes gives rise to different plans. You can change this in reports using ALTER_SESSION. E.g. we find this can speed up reports:
srw.do_sql('ALTER SESSION SET optimizer_index_cost_adj=50');
srw.do_sql('ALTER SESSION SET optimizer_index_caching=90'); if put in the before report trigger (nb the values may differ depending on your environment.

Form when running through menu

Hi
I have a form - and when I run it from forms, it runs with the a toolbar up the top with icons for save, delete record etc. However when I run it through a menu (.mmb), it doesn't have this toolbar at the top. How do I make it show this toolbar when running from a menu?
Thanks
Martin

Sorry, I didn't see your reply before.
I think the problem could be that you specify No_Replace. This means that [Oracle Forms will keep the default menu module of the calling form active for the called form|http://www.oracle.com/webapps/online-help/forms/10g/topics/f1_help/builta_c/callform.html?tp=true].
You should look into using the FORMS_PATH variable instead of using the full path to the form, it's not essential but it's more flexible. On earlier versions this is FORMS90_PATH, FORMS60_PATH etc, and is set in the .ENV file (assuming you're on webforms).

Built EXE asks for sub VI when run

Hi,
Several times when building an application for a very simple programs I get errors very stupid error when running the exe. It keeps asking for a sub vi. Not all my build do this? What should I check that would be the source of this error?
Enclosed is error and sample project that demonstrates the issue.
Thanks,
John
Attachments:
err.png ‏45 KB
Time.zip ‏41 KB

It works fine for me. The only thing I noticed is the project had trouble locating your VIs straight from the zip file. Maybe a file was not where the project thought it should be?
There are only two ways to tell somebody thanks: Kudos and Marked Solutions
Unofficial Forum Rules and Guidelines

How to set dynamic value for field Month when running background job ?

Dear guys,
I have a Z* report in our company, in the selection screen there is a period field (Month and Year) and this report running in background job periodically. My Question is how i can set for Month field become dynamic follow month value of date when this report executed ?
Example :
When Z* report running in background on 16.04.2008, Month Value will be 04 and when running on 16.05.2008, Month Value will be 05.
Please advice.
Regards
Gunawan

Dear guys,
I have a Z* report in our company, in the selection screen there is a period field (Month and Year) and this report running in background job periodically. My Question is how i can set for Month field become dynamic follow month value of date when this report executed ?
Example :
When Z* report running in background on 16.04.2008, Month Value will be 04 and when running on 16.05.2008, Month Value will be 05.
Please advice.
Regards
Gunawan

Default variant to be picked for QGA3 when run through QE01/QE02/QE03.

Hi Gurus,
I need help regarding one requirement, Our client want to have default variant which will have custom form name of selection screen of QGA3, along with the inspection lot number carried from QE01/QE02/QE03.
Our client did not get convinced for any alternative like custom transaction code or transaction variant for QGA3, they want only during std t-code run only.
I will explain the requirement once again, During QE01/QE02/QE03 when we click on "Inspection result print" it will take to QGA3 screen. The inspection lot is carry forward from QE01/QE02/QE03 to QGA3 screen and along with this the default variant also to be picked automatically .
Thanks in advance for your help
Nag.

Explore function module exit EXIT_SAPLQEEM_022 & EXIT_SAPLQEEM_026

Query taking too much time when running through discover

Hi
I have created report with sql query by creating custom folder in oracle discover desktop. Query is using parameter with sys_context. When report is executed from discover it takes more than 5 minutes and same query is executed in 30 seconds when executed in database through toad.
Pls. let me know what could be the reason for this?
Thanks

Hi,
The first thing to check is whether the query is running to completion in TOAD. By default, TOAD just selects the first 50 rows, where as Discoverer must return all the rows before displaying results if a crosstab report is used.
Secondly, check that the queries and the explain plans are the same in Discoverer and Toad. Although, Discoverer shows the SQL in the SQL inspector this isn't necessarily the SQL actually sent to the database. Use TOAD to interogate the Discoverer session to determine the actual SQL and compare this SQL and explain plan to SQL you ran in TOAD.
Thirdly, check that the session context is the same in both cases. So check that any custom contexts and the USER_ENV context is the same, and if any security packages or VPD policies are used in the SQL that these have been initialised the same.
If you still cannot determine the difference then trace both sessions.
Rod West

Seeking a driver for my printer to run through my Airport Extreme router

Im trying to find a driver for my Lexmark X1100 series printer which would allow me to run the printer through the usb port of my Airport Extreme router. The printer works when plugged directly into the usb port of the computer. I have a Windows 7 Asus computer. Can anyone help me please. I am using the Bonjour printer wizard to set up the router for the printer. Thanks

There is no driver that will allow that, as this printer only works by connecting it to a host computer, not to a network. No printer driver or software is ever installed to the AirPort Extreme for any printer. Printer drivers and print/scan/fax software (if any) must be installed separately to each computer that will be using a printer.

Runtime error in Applet only appears when running through IDE applet viewer

Java 5.0
Netbeans 4.1
Linux (Suse 9.3)
I only started getting this error when I set the data loading and initialization classes into a separate thread. (the data loading and init is currently just using dummy test data within the class, nothing is loaded from external files as of yet)
Exception in thread "J3D-MasterControl" java.lang.NullPointerException
        at javax.media.j3d.SoundScheduler.activate(SoundScheduler.java:714)
        at javax.media.j3d.MasterControl.viewActivate(MasterControl.java:2539)
        at javax.media.j3d.MasterControl.handlePendingRequest(MasterControl.java:3032)
        at javax.media.j3d.MasterControl.doWork(MasterControl.java:2956)
        at javax.media.j3d.MasterControlThread.run(MasterControlThread.java:28)This error only comes up about 50% of the time, and only when I run it within the IDE applet viewer. I've never gotten this error when I run it from a web browser (tested with IE, Firefox and Opera).
Is this an error I should be worried about, since it only comes up within the IDE?

Chana_R wrote:
Thanks for the reply. I am new to this topic area (though pretty good a programming in general...), so forgive me the query below is offbase.
The applet is unsigned. For what it is worth, the applet code and the database are stored on the same machine. However, I can see where a client running the applet is a remote user and so the system may view this as a different source of code (IP/DNS).User has nothing to do with it.
>
I am currently to the point I can run the applet on my own server's browser, but cannot access the applet via a remote browser. I get an java.lang.NullPointerException
     at JdbcTest.init(JdbcTest.java:40)
     at sun.plugin2.applet.Plugin2Manager$AppletExecutionRunnable.run(Unknown Source)
     at java.lang.Thread.run(Unknown Source)
Would this be typical of the problem you describe?
No. You will get an exception for the problem I discussed. The problem you have suggests either something else is wrong or you are eating an exception and then attempting to continue.
And secondly, what is a reasonably safe (and yet free!) method to deal with this? Is there a way to handle through java.policy or should I sign the applet? I've never worked with signed applets...but I can certainly start reading up on the topic...Signing the applet is easier in terms of distribution. Policy change is quicker if you are just messing around or if you have a very limited distribution target.

Scripts that work in VSTS IDE fails when run through MTM.

Hi, we have created scripts using VSTS Coded UI that work well when triggered from VSTS IDE itself. But when we trigger them through MTM and executed from Agent Machine, it seems that some controls are not being identified properly. This is causing scripts
to fail intermittently.
When we re run the script again, it passes. this behaviour is inconsistent.
Since this issue does not occur in VSTS, it has to be somehow linked to how the scripts work through MTM. any guidance on this will be much appreciated

Hi Vasanth,
Thank you for posting in MSND forum.
>>But when we trigger them through MTM and executed from Agent Machine, it seems that some controls are not being identified properly. This is causing scripts to fail intermittently.
According to your issue, could you please share me the detailed error message after you run coded UI test some controls failed through MTM?
In addition, as you said that since this coded UI test script work well by the VSTS IDE, so the issue is not related to the coded UI test project itself.
Therefore, to check if this issue is related to the lab environment, I suggest you could try to create a simple coded UI test from VSTS IDE and then ensure the simple coded UI test work well from the VSTS IDE.
Then, you could try to run this simple coded UI test by MTM and then check if you could run the simple coded UI test fine.
(1) If you still could not run simple coded UI test well, I suggest you could try to restart your test agent machine and then check this issue again.
(2) If you could run this simple coded UI test, I suggest you could to make Coded UI Tests Wait For Specific Events and then check this issue again.
https://msdn.microsoft.com/en-us/library/gg131072.aspx?f=255&MSPPError=-2147217396
In addition, if you are testing the web application for coded UI test, please try to check if the test agent machine's IE browser is same with the local VS machine. Sometime, the different version of IE will impact the coded UI test.
If you have any update message about your issue, please free fell let to me know.
Best Regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Recommendations for gain staging when running through a PA

Similar Messages

Maybe you are looking for