Recompile installed packages?

Hey,
I am running arch on a Core Duo laptop.
Suppose I got a few hours to kill and want to recompile all my installed packages
to my CPU. I got makepkg.conf all set up and ready.
Is there a way (using ABS maybe?) to recompile and install all my installed packages automatically?
Does ABS provide such an option?
thanks
fiod
Last edited by fiod (2008-04-25 19:04:37)

stylopath wrote:well, i found out that recompiling udev with custom compiler flags can speed up udev processing time at boot a lot.
With the Stock-package it took about 5 seconds, with my own-compiled less than 3.
I just had to check that, had 6s udev uevents at boot times, after recompile with -march=pentium4 -O2 got 5,9s.
Im dissapointed

Similar Messages

Can't download itunes. keep getting message. message"this instillation package could not be opened. verify that the package exists and that you can access it or contact the application vendor to verify that this is a valid windows installed package".

Ever time I try to download itune on my new packard bell I get the message "this instillation package could not be opened. verify that the package existsmand that you can access it or contact the application vendor to verify that this is a valid windows installed package" PLEEEEASE someone help me as I've lost all of my music!

tried downloading the quicktime installer, I get the same message with it too

I have FF 3.6.25 and can't install the yoville zynga gamebar i get an error msg that its not a valid install package - 207. can someone help me with this so that it will work?

i'm running ff 3.6.25 and can't install the yoville zynga gamebar the message i get is as follows:
Firefox could not install the file at http://zynga.ourtoolbar.com/xpi because: Not a valid install package -207
i installed it on my mom's pc after installing ff to it and it worked fine.

Hi,
You may have to update Firefox. Please also check the Firefox version on mom's PC: '''Help''' ('''Alt''' + '''H''') > '''About Firefox'''.
https://www.mozilla.org/en-US/firefox/new/
Useful links:
[https://support.mozilla.com/en-US/kb/Options%20window All about Tools > Options]
[http://kb.mozillazine.org/About:config Going beyond Tools > Options - about:config]
[http://kb.mozillazine.org/About:config_entries about:config Entries]
[https://support.mozilla.com/en-US/kb/Page%20Info%20window Page Info] Tools (Alt + T) > Page Info, Right-click > View Page Info
[https://support.mozilla.com/en-US/kb/Keyboard%20shortcuts Keyboard Shortcuts]
[https://support.mozilla.com/en-US/kb/Viewing%20video%20in%20Firefox%20without%20a%20plugin Viewing Video without Plugins]
[http://kb.mozillazine.org/Profile_folder_-_Firefox Firefox Profile Folder & Files]
[https://developer.mozilla.org/en/Command_Line_Options#Browser Firefox Commands]
[https://support.mozilla.com/en-US/kb/Basic%20Troubleshooting Basic Troubleshooting]
[https://support.mozilla.com/en-US/kb/common-questions-after-upgrading-firefox-36 After Upgrading]
[https://support.mozilla.com/en-US/kb/Safe%20Mode Safe Mode]
[http://kb.mozillazine.org/Problematic_extensions Problematic Extensions]
[https://support.mozilla.com/en-US/kb/Troubleshooting%20extensions%20and%20themes Troubleshooting Extensions and Themes]
[https://support.mozilla.com/en-US/kb/Troubleshooting%20plugins Troubleshooting Plugins]
[http://kb.mozillazine.org/Testing_plugins Testing Plugins]

Adobe Air Install Package Signed by Revoke Certificate?

My security settings may be a little more strick than most. I just download the adobe air install package today. I think the revoked signature is preventing the installation. Can anyone confirm the signature? Thanks.

No problems with the signature on a new Windows 7 x64 / IE10 install with default settings .

No longer able to install packages

HI,
My remote desktop (3.5.1) crashed about a week ago. After the crash I have been unable to "Install packages" to any client from this laptop. There have been no changes in our network, or the client machines, or my login/password.
Under ARD preferences I've even set it to Full access for non-admins, just in-case. The client machines do allow installs in their remote desktop settings. I do have another machine with ARD 3.5.1 and CAN successfully install from that machine to the same clients.
I am able to copy, and run unix commands- only Install seems to be affected. Any ideas what might be causing this?

Try this link: https://discussions.apple.com/thread/3213196?tstart=0
Which hopefully takes you to a post by Scooter Magrooter that basically says
1. Open Remote Desktop Preferences/Task Server
2. Select to use a remote task server.
3. Put in an IP - scooter says any IP, I am much more successful with the IP of the computer I am on.
4. Probably will be asked for username and password.
5. Mine jumps back to "use this computer" automatically. If not, select that and close out.
Now try it.
I have to do this regularly. Annoying, but liveable.
Hope this does it for you.
Chicster

The current iTunes 10.5 upgrade does not install on Windows 7 and indicates a faulty install package (error 2324). Advice or details on the release date for a proper fix?

The current iTunes 10.5 upgrade does not install on Windows 7 and indicates a faulty install package (error 2324). Advice or details on the release date for a proper fix? I'm not able to roll back to the prior version, so I'm stuck in limbo.

There have been a number of problems with installing the latest iTunes on Windows 7 64-bit machines during the last couple of weeks. You might want to do a search on that topic and see if anyone has a solution. There have been various versions of the problem but a lot related to errors in the download package or failure to download.

How to install packages from local folder

Hi all,
I have downloaded all arch linux packages from the following URLs:
ftp://mirrors.kernel.org/archlinux/core/os/i686/
ftp://mirrors.kernel.org/archlinux/extra/os/i686/
ftp://mirrors.kernel.org/archlinux/community/os/i686/
and then have saved them to an external hard disk. Then I have attached that external hard disk to my system and packages are available in following folders:
/mnt/external_hd/Arch_Linux/Core-OS/
/mnt/external_hd/Arch_Linux/Extra-OS-1/
/mnt/external_hd/Arch_Linux/Extra-OS-2/
/mnt/external_hd/Arch_Linux/Community-OS-1/
/mnt/external_hd/Arch_Linux/Community-OS-2/
/mnt/external_hd/Arch_Linux/Community-OS-3/
Now I want to install some or all packages from these folder with the help of pacman command. I am seeing that package corresponding to wvdial command is available in the /mnt/external_hd/Arch_Linux/Extra-OS-1/ folder. But how to use pacman command so that I can install wvdial package from that folder?
In addition to this if I want to install ALL Extra Packages available in the folders /mnt/external_hd/Arch_Linux/Extra-OS-1/ and /mnt/external_hd/Arch_Linux/Extra-OS-2/ then how to execute the pacman command?
Please send me step by step instructions so that I shall be able to install some or all downloaded packages.
I shall remain thankful for this forever.
Best Regards ...
Pankaj Kumar

Hi fukawi2,
Thanks for reply and searching for my username on google. It is true that I am a freelance s/w developer but I am not installing Arch Linux for any client. I am installing it due to some other reasons. In fact I started working on Red Hat and then on Fedora when I was a student of bachelor degree course in computer applications. Then later I searched open suse and started using it. I am using open suse from its 10.1 version. However the recent version of this distribution has become much resource consuming. So I am in the need of a light weight linux distribution. And I encountered Arch Linux. Then I purchased its installation disk from an online shop and installed it on my system. But only text mode is working at this moment. Since I want to use X window and so I started to follow the syntax of pacman command. But it is connecting to internet. Since my internet connection is slow (average speed of 10kbps) and so I requested the same online shop to download all packages from Arch Linux repository and send them to me. Therefore now I am having all those packages in my local external hard disk drive in the folder mentioned in my first post. Now I want to install packages from these folder. And so in order to get help I have come to this forum.
I have also followed the steps given on the pages https://wiki.archlinux.org/index.php/Pa … l_commands and https://wiki.archlinux.org/index.php/Pa … repository. But when I am trying to install a particular package using the following command:
pacman -U wvdial
then it is asking for a dependency. I know that the dependent package in my local folder but why it is not being automatically taken by pacman command? Can you please explain it.
That is why I am asking help only for customization and usages of pacman in order to install packages from local folder. But each member in this forum is only referring to long written manuals and not giving me exact solution which I think will involve four/five steps.
Best Regards ...
Pankaj Kumar

Where is the install package stored from the app store for Lion?

This is an all new way of deploying OS updates from Apple. From what I can see, this presents some issues:
1. Where is the install package that I bought from the app store, and how can I save that offline?
2. If there's a problem with my device in the future, I have no media of Lion to restart from- so what's the procedure to restore from a TM backup? Go back to 10.6, and then to the 10.7 update?
3. What if I want to boot from disc or a drive? I don't have a copy of the install to make a bootable image.
Thanks for the help

OK, once you install Lion the Installation Package gets deleted. However once you have installed Lion, do following:
- Open the AppStore Application
- With pressed Option (on German Keyboard ALT) Key klick on the "Purchased" Tab!
- You will now see that the prviously greyed out "Install" key for Lion becomes active
- Download the install package
- Do not start installation
- In order to create a bootable DVD or USB drive containing the installer follow instructions posted on
http://www.macworld.com/article/161069/2011/07/make_a_bootable_lion_installer.ht ml
This is how you can create installation media.
For maintenance options (means your Lion installation has some problems but your drive is still OK)
you can boot from the hidden recovery partitions that was created when you installed Lion.
To do so, press the Option (ALT) Key while booting. You will have now the option to boot from
Lion or recovery partition.
Hope this helps!

[SOLVED] cannot install package query

I want to install yaourt, but I can't seem to install package query. I acquired the tarball from here and followed all the steps here
[maarten@maarten ~]$ cd ~/src
[maarten@maarten src]$ tar -zxvf package-query.tar.gz
package-query/
package-query/PKGBUILD
[maarten@maarten src]$ cd ~/src/package-query
[maarten@maarten package-query]$ makepkg -s
==> Making package: package-query 1.0.1-1 (Sun Jul 8 11:09:03 CEST 2012)
==> Checking runtime dependencies...
==> Checking buildtime dependencies...
==> Retrieving Sources...
-> Downloading package-query-1.0.1.tar.gz...
% Total % Received % Xferd Average Speed Time Time Time Current
Dload Upload Total Spent Left Speed
100 361k 100 361k 0 0 205k 0 0:00:01 0:00:01 --:--:-- 226k
==> Validating source files with md5sums...
package-query-1.0.1.tar.gz ... Passed
==> Extracting Sources...
-> Extracting package-query-1.0.1.tar.gz with bsdtar
==> Starting build()...
checking for a BSD-compatible install... /usr/bin/install -c
checking whether build environment is sane... yes
checking for a thread-safe mkdir -p... /bin/mkdir -p
checking for gawk... gawk
checking whether make sets $(MAKE)... yes
checking for gcc... gcc
checking whether the C compiler works... yes
checking for C compiler default output file name... a.out
checking for suffix of executables...
checking whether we are cross compiling... no
checking for suffix of object files... o
checking whether we are using the GNU C compiler... yes
checking whether gcc accepts -g... yes
checking for gcc option to accept ISO C89... none needed
checking for style of include used by make... GNU
checking dependency style of gcc... gcc3
checking build system type... i686-pc-linux-gnu
checking host system type... i686-pc-linux-gnu
checking how to print strings... printf
checking for a sed that does not truncate output... /bin/sed
checking for grep that handles long lines and -e... /usr/bin/grep
checking for egrep... /usr/bin/grep -E
checking for fgrep... /usr/bin/grep -F
checking for ld used by gcc... /usr/bin/ld
checking if the linker (/usr/bin/ld) is GNU ld... yes
checking for BSD- or MS-compatible name lister (nm)... /usr/bin/nm -B
checking the name lister (/usr/bin/nm -B) interface... BSD nm
checking whether ln -s works... yes
checking the maximum length of command line arguments... 1572864
checking whether the shell understands some XSI constructs... yes
checking whether the shell understands "+="... yes
checking how to convert i686-pc-linux-gnu file names to i686-pc-linux-gnu format... func_convert_file_noop
checking how to convert i686-pc-linux-gnu file names to toolchain format... func_convert_file_noop
checking for /usr/bin/ld option to reload object files... -r
checking for objdump... objdump
checking how to recognize dependent libraries... pass_all
checking for dlltool... no
checking how to associate runtime and link libraries... printf %s\n
checking for ar... ar
checking for archiver @FILE support... @
checking for strip... strip
checking for ranlib... ranlib
checking command to parse /usr/bin/nm -B output from gcc object... ok
checking for sysroot... no
checking for mt... no
checking if : is a manifest tool... no
checking how to run the C preprocessor... gcc -E
checking for ANSI C header files... yes
checking for sys/types.h... yes
checking for sys/stat.h... yes
checking for stdlib.h... yes
checking for string.h... yes
checking for memory.h... yes
checking for strings.h... yes
checking for inttypes.h... yes
checking for stdint.h... yes
checking for unistd.h... yes
checking for dlfcn.h... yes
checking for objdir... .libs
checking if gcc supports -fno-rtti -fno-exceptions... no
checking for gcc option to produce PIC... -fPIC -DPIC
checking if gcc PIC flag -fPIC -DPIC works... yes
checking if gcc static flag -static works... yes
checking if gcc supports -c -o file.o... yes
checking if gcc supports -c -o file.o... (cached) yes
checking whether the gcc linker (/usr/bin/ld) supports shared libraries... yes
checking whether -lc should be explicitly linked in... no
checking dynamic linker characteristics... GNU/Linux ld.so
checking how to hardcode library paths into programs... immediate
checking whether stripping libraries is possible... yes
checking if libtool supports shared libraries... yes
checking whether to build shared libraries... yes
checking whether to build static libraries... yes
checking ctype.h usability... yes
checking ctype.h presence... yes
checking for ctype.h... yes
checking getopt.h usability... yes
checking getopt.h presence... yes
checking for getopt.h... yes
checking libintl.h usability... yes
checking libintl.h presence... yes
checking for libintl.h... yes
checking limits.h usability... yes
checking limits.h presence... yes
checking for limits.h... yes
checking locale.h usability... yes
checking locale.h presence... yes
checking for locale.h... yes
checking sys/ioctl.h usability... yes
checking sys/ioctl.h presence... yes
checking for sys/ioctl.h... yes
checking sys/utsname.h usability... yes
checking sys/utsname.h presence... yes
checking for sys/utsname.h... yes
checking for alpm_version in -lalpm... yes
checking for yajl_free in -lyajl... yes
checking for gawk... (cached) gawk
checking for curl-config... /usr/bin/curl-config
checking for the version of libcurl... 7.26.0
checking for libcurl >= version 7.19.4... yes
checking whether libcurl is usable... yes
checking for curl_free... yes
checking whether NLS is requested... yes
checking for msgfmt... /usr/bin/msgfmt
checking for gmsgfmt... /usr/bin/msgfmt
checking for xgettext... /usr/bin/xgettext
checking for msgmerge... /usr/bin/msgmerge
checking for ld used by GCC... /usr/bin/ld
checking if the linker (/usr/bin/ld) is GNU ld... yes
checking for shared library run path origin... done
checking for CFPreferencesCopyAppValue... no
checking for CFLocaleCopyCurrent... no
checking for GNU gettext in libc... yes
checking whether to use NLS... yes
checking where the gettext function comes from... libc
checking for git... git
checking for .git/... no
configure: creating ./config.status
config.status: creating src/Makefile
config.status: creating doc/Makefile
config.status: creating Makefile
config.status: creating config.h
config.status: executing depfiles commands
config.status: executing libtool commands
config.status: executing po-directories commands
package-query:
Build information:
source code location : .
prefix : /usr
sysconfdir : /etc
conf file : /etc/pacman.conf
localstatedir : /var
database dir : /var/lib/pacman/
compiler : gcc
compiler flags : -march=i686 -mtune=generic -O2 -pipe -fstack-protector --param=ssp-buffer-size=4 -D_FORTIFY_SOURCE=2
package-query version : 1.0.1
using git version : no
git ver :
Variable information:
root working directory : /
aur base url : [url]http://aur.archlinux.org[/url]
make all-recursive
make[1]: Entering directory `/home/maarten/src/package-query/src/package-query-1.0.1'
Making all in src
make[2]: Entering directory `/home/maarten/src/package-query/src/package-query-1.0.1/src'
gcc -DLOCALEDIR=\"/usr/share/locale\" -DCONFFILE=\"/etc/pacman.conf\" -DROOTDIR=\"/\" -DDBPATH=\"/var/lib/pacman/\" -DAUR_BASE_URL=\"http://aur.archlinux.org\" -DHAVE_CONFIG_H -I. -I.. -D_GNU_SOURCE -march=i686 -mtune=generic -O2 -pipe -fstack-protector --param=ssp-buffer-size=4 -D_FORTIFY_SOURCE=2 -MT aur.o -MD -MP -MF .deps/aur.Tpo -c -o aur.o aur.c
mv -f .deps/aur.Tpo .deps/aur.Po
gcc -DLOCALEDIR=\"/usr/share/locale\" -DCONFFILE=\"/etc/pacman.conf\" -DROOTDIR=\"/\" -DDBPATH=\"/var/lib/pacman/\" -DAUR_BASE_URL=\"http://aur.archlinux.org\" -DHAVE_CONFIG_H -I. -I.. -D_GNU_SOURCE -march=i686 -mtune=generic -O2 -pipe -fstack-protector --param=ssp-buffer-size=4 -D_FORTIFY_SOURCE=2 -MT alpm-query.o -MD -MP -MF .deps/alpm-query.Tpo -c -o alpm-query.o alpm-query.c
alpm-query.c: In function 'alpm_pkg_get_realsize':
alpm-query.c:486:9: warning: ignoring return value of 'chdir', declared with attribute warn_unused_result [-Wunused-result]
mv -f .deps/alpm-query.Tpo .deps/alpm-query.Po
gcc -DLOCALEDIR=\"/usr/share/locale\" -DCONFFILE=\"/etc/pacman.conf\" -DROOTDIR=\"/\" -DDBPATH=\"/var/lib/pacman/\" -DAUR_BASE_URL=\"http://aur.archlinux.org\" -DHAVE_CONFIG_H -I. -I.. -D_GNU_SOURCE -march=i686 -mtune=generic -O2 -pipe -fstack-protector --param=ssp-buffer-size=4 -D_FORTIFY_SOURCE=2 -MT util.o -MD -MP -MF .deps/util.Tpo -c -o util.o util.c
util.c: In function 'ltostr':
util.c:532:11: warning: ignoring return value of 'asprintf', declared with attribute warn_unused_result [-Wunused-result]
util.c: In function 'itostr':
util.c:525:11: warning: ignoring return value of 'asprintf', declared with attribute warn_unused_result [-Wunused-result]
util.c: In function 'concat_backup_list':
util.c:480:12: warning: ignoring return value of 'asprintf', declared with attribute warn_unused_result [-Wunused-result]
util.c: In function 'string_fcat':
util.c:342:11: warning: ignoring return value of 'vasprintf', declared with attribute warn_unused_result [-Wunused-result]
mv -f .deps/util.Tpo .deps/util.Po
gcc -DLOCALEDIR=\"/usr/share/locale\" -DCONFFILE=\"/etc/pacman.conf\" -DROOTDIR=\"/\" -DDBPATH=\"/var/lib/pacman/\" -DAUR_BASE_URL=\"http://aur.archlinux.org\" -DHAVE_CONFIG_H -I. -I.. -D_GNU_SOURCE -march=i686 -mtune=generic -O2 -pipe -fstack-protector --param=ssp-buffer-size=4 -D_FORTIFY_SOURCE=2 -MT color.o -MD -MP -MF .deps/color.Tpo -c -o color.o color.c
mv -f .deps/color.Tpo .deps/color.Po
gcc -DLOCALEDIR=\"/usr/share/locale\" -DCONFFILE=\"/etc/pacman.conf\" -DROOTDIR=\"/\" -DDBPATH=\"/var/lib/pacman/\" -DAUR_BASE_URL=\"http://aur.archlinux.org\" -DHAVE_CONFIG_H -I. -I.. -D_GNU_SOURCE -march=i686 -mtune=generic -O2 -pipe -fstack-protector --param=ssp-buffer-size=4 -D_FORTIFY_SOURCE=2 -MT package-query.o -MD -MP -MF .deps/package-query.Tpo -c -o package-query.o package-query.c
mv -f .deps/package-query.Tpo .deps/package-query.Po
/bin/sh ../libtool --tag=CC --mode=link gcc -D_GNU_SOURCE -march=i686 -mtune=generic -O2 -pipe -fstack-protector --param=ssp-buffer-size=4 -D_FORTIFY_SOURCE=2 -lcurl -Wl,-O1,--sort-common,--as-needed,-z,relro -o package-query aur.o alpm-query.o util.o color.o package-query.o -lyajl -lalpm
libtool: link: gcc -D_GNU_SOURCE -march=i686 -mtune=generic -O2 -pipe -fstack-protector --param=ssp-buffer-size=4 -D_FORTIFY_SOURCE=2 -Wl,-O1 -Wl,--sort-common -Wl,--as-needed -Wl,-z -Wl,relro -o package-query aur.o alpm-query.o util.o color.o package-query.o -lcurl -lyajl -lalpm
make[2]: Leaving directory `/home/maarten/src/package-query/src/package-query-1.0.1/src'
Making all in doc
make[2]: Entering directory `/home/maarten/src/package-query/src/package-query-1.0.1/doc'
make[2]: Nothing to be done for `all'.
make[2]: Leaving directory `/home/maarten/src/package-query/src/package-query-1.0.1/doc'
make[2]: Entering directory `/home/maarten/src/package-query/src/package-query-1.0.1'
make[2]: Leaving directory `/home/maarten/src/package-query/src/package-query-1.0.1'
make[1]: Leaving directory `/home/maarten/src/package-query/src/package-query-1.0.1'
==> Entering fakeroot environment...
==> Starting package()...
Making install in src
make[1]: Entering directory `/home/maarten/src/package-query/src/package-query-1.0.1/src'
make[2]: Entering directory `/home/maarten/src/package-query/src/package-query-1.0.1/src'
test -z "/usr/bin" || /bin/mkdir -p "/home/maarten/src/package-query/pkg/usr/bin"
/bin/sh ../libtool --mode=install /usr/bin/install -c package-query '/home/maarten/src/package-query/pkg/usr/bin'
libtool: install: /usr/bin/install -c package-query /home/maarten/src/package-query/pkg/usr/bin/package-query
make[2]: Nothing to be done for `install-data-am'.
make[2]: Leaving directory `/home/maarten/src/package-query/src/package-query-1.0.1/src'
make[1]: Leaving directory `/home/maarten/src/package-query/src/package-query-1.0.1/src'
Making install in doc
make[1]: Entering directory `/home/maarten/src/package-query/src/package-query-1.0.1/doc'
make[2]: Entering directory `/home/maarten/src/package-query/src/package-query-1.0.1/doc'
make[2]: Nothing to be done for `install-exec-am'.
test -z "/usr/share/man/man8" || /bin/mkdir -p "/home/maarten/src/package-query/pkg/usr/share/man/man8"
/usr/bin/install -c -m 644 package-query.8 '/home/maarten/src/package-query/pkg/usr/share/man/man8'
make[2]: Leaving directory `/home/maarten/src/package-query/src/package-query-1.0.1/doc'
make[1]: Leaving directory `/home/maarten/src/package-query/src/package-query-1.0.1/doc'
make[1]: Entering directory `/home/maarten/src/package-query/src/package-query-1.0.1'
make[2]: Entering directory `/home/maarten/src/package-query/src/package-query-1.0.1'
make[2]: Nothing to be done for `install-exec-am'.
make[2]: Nothing to be done for `install-data-am'.
make[2]: Leaving directory `/home/maarten/src/package-query/src/package-query-1.0.1'
make[1]: Leaving directory `/home/maarten/src/package-query/src/package-query-1.0.1'
==> Tidying install...
-> Purging unwanted files...
-> Compressing man and info pages...
-> Stripping unneeded symbols from binaries and libraries...
==> Creating package...
-> Generating .PKGINFO file...
-> Compressing package...
==> Leaving fakeroot environment.
==> Finished making: package-query 1.0.1-1 (Sun Jul 8 11:09:18 CEST 2012)
[maarten@maarten package-query]$ dir
PKGBUILD package-query-1.0.1.tar.gz src
package-query-1.0.1-1-i686.pkg.tar.xz pkg
[maarten@maarten package-query]$ sudo pacman -U package-query-1.0.1-1-i686.pkg.tar.xz
Password:
loading packages...
error: 'package-query-1.0.1-1-i686.pkg.tar.xz': invalid or corrupted package (PGP signature)
I already reran pacman-key --init and pacman-key --populate archlinux after removing the allready acquired signatures (/etc/pacman.d/gnupg). But it keeps returning the same error.
Do I need to add another key manually to install packages manually from the AUR?
Last edited by maartennnnnnn (2012-07-08 09:44:01)

I edited your post to change the \[quote\] tags to \[code\] tags - it makes for a much easier to read post
https://wiki.archlinux.org/index.php/Fo … s_and_Code
Two options are to change your SigLevel or sign your own key...

Acrobat 9 Professional simplified Chinese install package address

We have been purchased Acrobat 9 Professional simplified Chinese licences for many years, but we lost the install file, Could you give us the install package address for it? PS: There are only language English/ French/ German / Japanese on the public page: http://helpx.adobe.com/acrobat/kb/acrobat-8-9-product-downloads.html

Moving this discussion to the Acrobat Installation & Update Issues forum.

Error in installing packages during jumpstart

The machine I am installing via jumpstart is on a terminal server and I am connected to ttya. I am seeing these errors in the log:
## Executing postinstall script.
pkgadd: ERROR: freopen(/dev/tty, "a", stdout) failed, errno=6
pkgadd: ERROR: postinstall script did not complete successfully
and I am told the installation failed with an error code of 1 which, according to the pkgadd man page it a fatal error.
When I do a pkginfo -l on the package it appears that the package is there. Is this something to worry about?
If it means anything, this is the java 1.4.2_02 packages.
Kent

You might want to redirect stdout & stderr to /dev/null while installing packages via run-scripts (I'm assuming that 's the case).
So, when you're doing the pkgadd, do it like this:
echo y|pkgadd -a ${MD_PRODUCT}/admin -d `pwd` SUNWmdr > /dev/null 2>&1
Here I'm trying to install a disksuite pkg as a post-install and it givees me the same error messages that you get if I don't redirect 2>&1 to /dev/null
HTH

Installing packages as system

Hi everyone.
I have a question regarding installing packages and procedures. Lets assume, I am installing a procedure called "db_procedure" and I want it to be created under schema "EMP". My create or replace statement looks like this:
Create or replace procedure EMP.db_procedure as
Now, lets assume that I log into database as system and run this procedure. This procedure will be created under "emp" schema not system as I have the schema name attached to the procedure name.
My question is, is there any difference in running this procedure as system and running it as "EMP". My understanding is that as long as I add the schema name to the procedure name in the create or replace statement, there is no difference.
Create or replace procedure EMP.db_procedure as
I just wanted to understand what goes on behind the seems in oracle when you install this procedure as system. How is it different (if any) from installing it as "EMP".
I believe there is none.
Thanks

user13118348 wrote:
My question is, is there any difference in running this procedure as system and running it as "EMP". My understanding is that as long as I add the schema name to the procedure name in the create or replace statement, there is no difference.
Create or replace procedure EMP.db_procedure as
I just wanted to understand what goes on behind the seems in oracle when you install this procedure as system. How is it different (if any) from installing it as "EMP".
I believe there is none.
I would say you are right. Allthough it would not be my preferred choice of deploying a procedure in the EMP schema. I would just connect as EMP and run it inside that session.

LMS3.2 ciscoview 6.1.9 not able to install package Rtr2900.cv50.v2-0

Hi ,
I m not able to install package Rtr2900.cv50.v2-0 for cisco2951 router in cisco view .cisco2900 router is supported on LMS3.2 .
Tried online as well as manual method , via - Common Services --->Software Center > Device Update.
it says "there is no updates available ".Please let me know if there is any other method to upgrade package .
Thanx for your reply ..
Raj

Hi ,
I m not able to install package Rtr2900.cv50.v2-0 for cisco2951 router in cisco view .cisco2900 router is supported on LMS3.2 .
Tried online as well as manual method , via - Common Services --->Software Center > Device Update.
it says "there is no updates available ".Please let me know if there is any other method to upgrade package .
Thanx for your reply ..
Raj

In install package, where to save in save to :

where do I save the downloaded files in the install package...under install to:

Not sure what you are asking. What product are you trying to install/ download? Generally it should not matter where you store your downloads...
Mylenium

App for SharePoint online : Resource files can not with the app install package deployment

I come from China, my English is not very good, bring you the confusion, I apologize;In the development of the APP to the store, I met a problem, hope someone can help me to solve, thank you very much, specific as follows:
The development tools: vs2012
Platform: office 365 development version
Host:Auto
Problem presentation:
Press "F5" debugging running normally,Generate app install package, deploy to test environment, the app page error, tip can't find the resource file"
error:
Server Error in '/' Application.
Object reference not set to an instance of an object.
Description: An
unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details: System.NullReferenceException: Object reference not set to an instance of an object.
Source Error:
Line 107: <div id="FoundareADUserIndex_PageHead">
Line 108: <span><img alt="" src="../images/head.png" height= "45px" width="45px" /> </span>
Line 109: <span style="color: #000000; font-size: 28px; font-weight: bold"><%=HttpContext.GetGlobalResourceObject("FoundareADUserResource", "foundare_index_head").ToString()%></span> 
Line 110:
Line 111:
Source File: c:\DWASFiles\sites\fzym9dfaguchcdqnvjrwcr2pqasevj5hpvhmcaydkdg1.0.0.0\VirtualDirectory0\site\wwwroot\Pages\Default.aspx
Line: 109
Stack Trace:

Hi,
According to your post, my understanding is that you want to use resource files in your SharePoint app project.
Here is an article for your reference:
http://msdn.microsoft.com/en-us/library/office/fp179919.aspx
Code sample: SharePoint 2013: Localize the app web, host web, and remote components of an app
http://code.msdn.microsoft.com/office/SharePoint-2013-Bookstore-328060fc/sourcecode?fileId=60464&pathId=1536365664
Best Regards
Dennis Guo
TechNet Community Support

Recompile installed packages?

Similar Messages

Maybe you are looking for