Record voice with microphone into local file.

I would like to build a small application in AS3 adobe Air so that my users can record their voice with microphone.
I know there is a Microphone class but I don't know if AS3  adobe Air allows to record the voice into a file locally.
Is that possible to do so with AS3 adobe Air?
Do I absolutely need Flash Media Server or is there a way around?

The Microphone class doesn't allow access to the bytes that are being streamed.  Join the cause to open the access! http://www.getmicrophone.com/
Although, you can accomplish this by using a streaming server I believe.  I've not yet experiemented with just audio recording, but I have with video/audio recording and that works just fine.

Similar Messages

  • Hello, please help, my interface is connected to the microphone and when i open Logic 9 it does´t work. But I opened garageband to check and it works fine. I can record voice with any effect... With Logic i see the sound passes in the interface.

    Hello, please help, my interface is connected to the microphone and when i open Logic 9 it does´t work. But I opened garageband to check and it works fine. I can record voice with any effect... With Logic i see the sound passes in the interface but does not arrive in Logic. The Loops works fine and i can hear. Is just the sound to record the voice it does not work. What can i do ??? I used Logic before in the same computer and it worked fine. Thank you so much, I´m a begginer recording myself.

    Make sure you go into preferences in Logic and set the audio input to be your interface and the audio output to be either built in output or the interface, if that is hooked up to something else. It sounds like Garageband has the audio interface set as the input but not Logic.
    Also make sure you close all other applications except Logic to ensure it is not running in slave mode...

  • Can i record voice with garageband?

    Can i record voice with garageband?

    Hi,
    I am a Garage Band dunce (first time user). I’ve imported a guitar track as track 1.
    I launched a “new basic track” with no effects for the vocal track, but cannot get any vocals to show up on the meter before recording.
    I can click on track one (my guitar track) and I can see the meter move when speaking into the mic, but when I click on track two, I get nothing from the mic.
    I’m sure the answer is obvious, but I don’t see it. Any tips?
    Thanks,
    Terry

  • How can i Store rtmp streaming into local File System?

    I use socket and netstream.appendBytes to receive and play flv frames.
    now I got the BytesArray,but how can i store them into local File?
    FlashPlayer can't use Air File APIs.

    This is by design.  Content on the Internet does not have access to your local filesystem.  We offer Local Shared Objects (LSOs) for storing small amounts of information, but this would not be suitable for scraping a video feed to disk.

  • Heading  during downloading into local file using GUI_DOWNLOAD fun.module

    Hi Guru's
    we have a requirement that we want the plant description as a heading (first line of the file) in the local file. iam using "GUI_DOWNLOAD" function module for downloading data for which iam passing the charecter type internal table. before downloading iam passing all the filed headings to that table and then appending the internal table data into it. now iam getting data properly with field headings . but before that heading i want one more description for a plant field which iam using in my selection screen
    in the fun.module "GUI_DOWNLAOD"
    we have HEADER file but it is of XSTRING type so it is taking only 2 char.
    so how to use this . Plz help me.
    thanks well in advance.
    UR's
    GSANA

    Hi,
    Please check the below link,
    header in 'gui_download'
    Also check Manoj kumar's reply in the link,
    header information to gui_download
    Hope this helps.
    Best Regards.

  • To record voice with a few second pre roll time

    When I record my voice, I want to hear pre-recorded voice a few second just like voice over tool in FCP.
    Has Soundtrack pro the fuction?

    No there isn't preroll.

  • Just want to record voice with my built in iMac microphone...guidance?

    evental goal is to use audo voice track for FCE, but want to lay down an audio track for a placeholder to measure length (time) and make some queues... any suggestions? Garage Band or something else.
    thanks
    -Russ

    Ok i have recorded a little sample with both Audicity and with QT. 
    it look like either will serve my 3 purposes 1) see how long copy is. 2) have something to put down in FCE  and 3 send to my VO guy so he has a "go-by"

  • How to add record voice over for a video file

    I have a video file (wmv) already prepared, and all I would like to now do is record a voice over for this file using Soundbooth CS4.  My hunch is that I need to import the video into a multi-track file, and then I expect I'll export the multitrack file back to the WMV when I'm done.  The problem is that when I hit the record button, I'm expecting to see the video playing but I don't.
    Is there a way to add a voice-over / narration to an exisiting video file (in this case a video file without an audio track at all)

    When you are recording, you are creating a new audio track and not playing the video, so you won't see it advance.
    Best bet is to open the video in WMP, and record your audio in SB while it plays, to get the timing right, then open the video in SB and past the recording into it.
    I'm not sure, but I believe the reason you can't play the vid and record at the same time is in case someone is recording new audio for a clip that has audio in it already, the old audio would play at the same time the recording is taking place and would screw it all up, so it either records one or plays the other, but not both at once.

  • Unwanted Noise Recording Voice with GarageBand

    Hi everyone, I'm using podcast factory as mic for my podcasts, and GarageBand to record them.
    The trouble is, that even shifting a little in my chair is picked up by the mic, and I daren't type on the keyboard or really move at all for fear of putting really heavy noise on the track.
    Im not sure what to do about this, as my voice sounds great apart from that!
    Anyone help me out? thx..

    Hello Nick,
    Along with the excellent advice already given, here's what I would suggest: If you're using a desktop mic stand, avoid putting it on the same table or desk as your computer. You'd be surprised at how much rumble and hum the computer is creating. Also, use a foam wind cover over the mic.
    If you don't have access to a "dead" room get a floor stand for your mic and record in a clothes closet. Yeah, I know it sounds stupid but I tried and got better results than sitting in my den. Rooms with hardwood floors, sliding glass doors and bare walls will affect the quality of your sound.
    I'll mention one other thing that worked for me until I could afford better equipment; the Logitech 350 headset mic. It's USB and does a pretty good job of isolating your voice while you record.
    Hope this helps. Good luck!

  • Is there software to record voice modulation as an MP4 file?

    I've looked on the net but can't find it. I need an application/software that can record sound modulation visually. I want to be able to see  a modulated voice as it appears on an audio track.  Anyone remember a TV program called "Outer Limits"? At the beginning all that's appears on the screen is the jagged line of voice like something one would see on an oscilloscope. I'd like to find software that records a voice as an MP4 for example, instead of an MP3, so I can then edit it as a visual track.

    Hello,
    For free there's Audacity...
    http://audacity.sourceforge.net/download/mac
    Beyond that are...
    http://www.i3net.it/dspquattro/asp/homepage.asp
    http://www.audiofile-engineering.com/waveeditor/
    http://www.bias-inc.com/products/peakPro6/
    We now return control of your television to you...

  • Error while downloading ALV grid o/p list  into local file

    Hello friends,
       I have developed an ALV report and desplaying it using
    'REUSE_ALV_GRID_DISPLAY, function module .While downloading the output list into excel format I am geeting an error "The current statement only supports character-type data objects.
    Error Analysis-
    In statement
       "STRLEN( obj )..."
    the argument "obj" can only take a character-type data object.
    In this case, the operand "obj" has the non-character type "P".
      I have set the import parameter i_save values as 'A'
    But still not able to download and facing the same error.
    Please help me out ....
    Thanking you....
    Regards,
    Rajesh Akarte
    Message was edited by:
            Rajesh Akarte

    Hi,
      following is the dump code..Is there any problem due to date and currency fields..?
    Error in ABAP application program.
    The current ABAP program "SAPLKKBL " had to be terminated because one of the
    statements could not be executed.
    038350       endif.
    038360       gs_out-hlplen = strlen( gs_out-hlpchar ).
    038370     elseif gs_fc-tech_form = 11.                              "INS TECH
    038380   *   Min. Ausgabelänge für ein Datum ist immer 8
    038390       if gs_fc-datatype = 'DATS'.                             "INS TECH
    038400         gs_out-hlplen = 8.                                    "INS TECH
    038410   *    Min. Ausgabelänge für eine Uhrzeit ist immer 6
    038420       elseif gs_fc-datatype = 'TIMS'.                         "INS TECH
    038430         gs_out-hlplen = 6.                                    "INS TECH
    038440       endif.                                                  "INS TECH
    038450     elseif gs_fc-tech_form = 1 or gs_fc-tech_form = 90.
    038460   *   Überführung int. in ext. Format via Konvertierungsexit
    038470       if not gs_fc-convexit is initial or                     "INS TECH
    038480          not gs_fc-inttype ca 'CN'.
    038490   *   elseif not gs_fc-convexit is initial.            "DEL TECH11
    038500         write Y9CK034230

  • How to download the Contents of Spool Requests as one line into Local File

    Hello All,
    I am running a report (Tcode- MC40)in background and i want to download the output from Spool list .
    but the issue with me is, in spool the contents are displaying in 2 rows, where as i want to downlod the details in 1 row by filtering some fields as per my need. There is no option to download SINGLE LINE / DOUBLE LINE  as like if i run in foreground .
    If i run it In Foreground , there is option to see the ouput in SINGLE LINE/DOUBLE LINE ... Same way i want to downaload the spool in background , as the report takes much time , so it has to run in back ground...
    anyone please suggest any idea ??
    Thanks all.

    try :
        CALL FUNCTION 'RSPO_RETURN_SPOOLJOB'
          EXPORTING
            rqident              = i_spools-rqident
            first_line           = 1
            last_line            = 0
            desired_type         = ' '
          IMPORTING
            real_type            = real_type
            sp_lang              = sp_lang
          TABLES
            buffer               = so_ali
          EXCEPTIONS
            no_such_job          = 1
            job_contains_no_data = 2
            selection_empty      = 3
            no_permission        = 4
            can_not_access       = 5
            read_error           = 6
            type_no_match        = 7
            OTHERS               = 8.

  • Problem with writing into txt file on the Web

    Hello friends - please could you give me an advice? Java console says:
    Exception in thread "AWT-EventQueue-2" java.security.AccessControlException: access denied (java.io.FilePermission http:\web.telecom.cz\jiriczech\xanado.txt write)
    Thank you a lot in advance:)!!

    The place you are trying to write the file to does not have write permission.

  • Download WDJ application into local file from portal

    hi all,
    i have to download one WDJ application which is running in portal, and modifiy the same.
    how to do that,
    Thanks
    Bala

    Hi,
    Go through the following links
    [How to get source code from portal app]
    [Restore source code from ear file;
    [http://help.sap.com/saphelp_nw2004s/helpdata/en/9c/8a9383a2aeda4a962446d3c29b9e19/frameset.htm]
    Regards
    Raghu

  • How to pack .class or .jar with jvm into an exe file?

    In fact, .class or .jar files are middle layer files who need JVM to explain and run them. Sometimes it's unconvenient. Why not provide some tools to pack .class or .jar with jvm into exe file?

    because java should be able to run on any OS. That is why SUN doesn't provide such tool. There are other company's who does provide such tool. Like JBuilder enterprise

Maybe you are looking for