Error page not getting cleared
I have a JSP that calls some java methods some of which might throw an exception. I have a very basic error page identified in the jsp and it seems to be getting called but not working properly. The problem is that the first jsp starts building the output for a page and when the error page gets called then the html from my error page gets appended to the html that was put there by the first jsp. Do I need to clear a buffer or something in my error page? Any help would be greatly appreciated. Thanks.
I've included the entire contents of my error page below. If I throw an exception very early in the JSP this works fine. I added the call to out.flush() recently and that hasn't helped.
<%@ page isErrorPage = "true" %>
<% out.flush(); %>
<HTML>
<HEAD>
<title>Test Error Page</title>
<LINK rel="stylesheet" href="mainstyle_01.css" type="text/css">
</HEAD>
<BODY>
<h3>Error: <%= exception.getMessage() %> has been reported. </h3>
</BODY>
</HTML>
Hi
Actuauly the problem is probably because of a filled up buffer. A default JSP page have a buffer of 8kb if you write more HTML than that before you get your exception the buffer will have been flushed and the content sent to the caller before the error page is called. I think there are also some function calls that flush the buffer by default.
For more information look at "<%@ page ...." syntax in the JSP docs and at the Buffer functions of the javax.servlet.ServletResponse Class.
Hope this helps
//Samuel
Similar Messages
-
Error Message not getting clear while creation of purchase order
Hi All,
I am facing one problem while creating purchasing order.
I have written one user-exit for purchase order. User has to enter purchase requisition number for certain purchase order type. If he doesnt enter PR number, we have to throw an error message.
I have used the MM06E005 for the same. User exit is working fine, but the problem is, all error messages are collected in log and it will be displayed in a dialog screen when you check the document (Transaction ME21N).
When I enter PR number and check the document, the error message is still there, system is not clearing the error log. I have created Z message class and have used in User exit.
Do you guys have any solution for this? Am I using the right user exit? What should I do to clear the error message?
If you dont have answer, please pass it to your friends also .
Thanks a lot in advanceHi Rob,
Your inforamtion was good enough to start. thanks a lot for that. I tried to implement the same but no luck this time also.
FYI..
The FM exit name is EXIT_SAPMM06E_012 and see the following code, i used.
TYPES: BEGIN OF type_my,
subrc TYPE sysubrc,
msgid TYPE symsgid,
msgty TYPE symsgty,
msgno TYPE symsgno,
msgv1 TYPE symsgv,
msgv2 TYPE symsgv,
msgv3 TYPE symsgv,
msgv4 TYPE symsgv,
END OF type_my.
DATA: my TYPE type_my.
DATA : GV_PO(10) TYPE I.
if I_EKKO-BSART = 'Z005'.
GV_PO = I_EKKO-EBELN.
loop at TEKPO.
if TEKPO-BANFN is initial.
message E000(ZBC_MESSAGES) with TEKPO-EBELP.
my-subrc = sy-subrc.
my-msgid = sy-msgid.
my-msgty = sy-msgty.
my-msgno = sy-msgno.
my-msgid = 'ZBC_MESSAGES'.
my-msgty = 'E'.
my-msgno = '000'..
my-msgv1 = sy-msgv1.
my-msgv2 = sy-msgv2.
my-msgv3 = sy-msgv3.
my-msgv4 = sy-msgv4.
Cleaning
CLEAR:
sy-subrc,
sy-msgid,
sy-msgty,
sy-msgno,
sy-msgv1,
sy-msgv2,
sy-msgv3,
sy-msgv4.
Generate message
mmpur_message my-msgty my-msgid my-msgno
my-msgv1 my-msgv2 my-msgv3 my-msgv4.
Remove message from message list
mmpur_remove_messages_by_id GV_PO.
endif.
endloop.
It is still not working. Moreover i don't have PO number at run time.
I hope this clarify the problem in more detail.
Meanwhile i am searching for OSS as suggested by Michael Bennett. -
JSF: Error Message are not getting cleared
Hi,
I am facing some problem with error messages in JSF.
Here is what I am doing
1. User submits a form, server validates and sends back the error to the client error message added to Faces Context.
2. User checks the messages, changes the input and submits. assuming everything is correct now.
3. On server, it validates and writes data to response for download using the following code.
FacesContext faces = FacesContext.getCurrentInstance();
HttpServletResponse response = (HttpServletResponse)faces.getExternalContext().getResponse();
DownloadResponse.sendDownload( response, is, fileName );
faces.responseComplete();
}4. It shows the download popup to download the file. The problem here is that error message are not getting cleared off. User can still see the error message on the screen.
It seems I am missing something in JSF req-response life cycle. Anyone please point out the mistake.SudhirMongia wrote:
4. It shows the download popup to download the file. The problem here is that error message are not getting cleared off. User can still see the error message on the screen. Wrong. The problem is that the view is not rerendered, which makes sense because you are not sending view content to the browser but your file.
Your real question probably is: how do I cause a file download and still rerender the view afterwards to show the results? To that I myself do not have the answer unfortunately, but I have seen that question come by a few times already, so doing some searches in these forums may yield you an answer. -
Yahoo loads log in click mail 404 error page not found why?
I upload yahoo site, log in, click 'mail' and am given a '404' error; page not found... This does NOT happen on Chrome or IE, but the pages of yahoo on IE suck and Chrome won't let me have a single toolbar even though there are all sorts of claim you can have one... (sorry) WHY doesn't FIREFOX let yahoo mail load? I LOVE FIREFOX and ALL THINGS MOZILLA, but after I ran into crappy-sappy babylon... it put a toolbar on IE, CHROME and MOZILLA... I had to delete everything associated with them all, get toolbar sweepers and better uninstall programs to weed their junk out and now MOZILLA, FIREFOX, rather warns no one and makes me submit this rather than help
Clear the cache and the cookies from sites that cause problems.
* "Clear the Cache": Tools > Options > Advanced > Network > Offline Storage (Cache): "Clear Now"
* "Remove the Cookies" from sites causing problems: Tools > Options > Privacy > Cookies: "Show Cookies" -
Error:Page not found or not available in Guided Procedure
Hi All,
i have created one GP process for input form. i am able to run the process from Design time, but when i am trying to run the process from the Runtime or after creation of iView/Page i am getting an error Page not found or not available .
Help me.....!!!!
DeepakHi All,
i have created one GP process for input form. i am able to run the process from Design time, but when i am trying to run the process from the Runtime or after creation of iView/Page i am getting an error Page not found or not available .
Help me.....!!!!
Deepak -
Oracle Certification Page Error - Page Not Found (404)
Hello,
I'm experiencing the following problem: can not access the certification section on oracle site:http://education.oracle.com/pls/web_prod-plq-dad/db_pages.getpage?page_id=39
I receive the following error:
Page Not Found (404)
We're sorry! The page you are looking for has been moved or no longer exists.
Please check the current status page first before logging an SR to AITSYS WEB SERVICES group
or Calling the HelpDesk and provide the following information along with steps to reproduce the issue:
Page Not Found Error 404 on Thursday, 23-Oct-2008 01:54:56 PDT amts498.oracle.com (141.146.13.151)
Does anyone have the same problem?I am sorry, but I am not able to replicate your issue. The page is working fine for me. Perhaps you could contact OU technical support. Are you also having trouble getting to page tihs page http://education.oracle.com/pls/web_prod-plq-dad/db_pages.getpage?page_id=3?
You can find OU technical support numbers on this page http://education.oracle.com/pls/web_prod-plq-dad/db_pages.getpage?page_id=123. There are also certification email addresses, but they will not be able to assist with technical problems with the website. The Oracle Certification Program Website is a part of the Oracle University website, so this is probably a bigger problem that you are having with the OU site.
Regards,
Brandye Barrington
Certification Forum Moderator
Certification Program Manager -
Htmldb/wwv_flow.accept error page not found
opening page htmldb/wwv_flow.accept error page not found
Application background
there is a button for getting a file which triggers some unix script to get file from ftp server.
it runs this pls sql package begin dbms_scheduler.run_job('PROD_GET_SL_FILES'); end;
After it gets the file and loads them to the database using sql loader then it zipp and email the files, after this process the next thing is to display the page with the message "Success: SL Files Zipped and Emailed"
It does every thing but to dispaly that message , then after some time i get
page not found and the page is "htmldb/wwv_flow.accept "
Other thing i noticed is it sends me an email with zipped files twice, the first one has attachements of the files the second one without attachement
I run oracle apex on oracle 10.2.0.1.
It has been working fine untill last two weeks i am getting
opening page htmldb/wwv_flow.accept error page not found
I tried to flush the shared_pool but no luck.
On the logs /u01/app/oracle/HTMLDB/Apache/Apache/logs
i see these errors
[Mon Jul 28 16:30:10 2008] [warn] [client 12.118.0.71] mod_plsql: Long running URL [pls/htmldb/f] timed out
[Mon Jul 28 16:35:12 2008] [warn] [client 12.118.0.71] mod_plsql: Long running URL [pls/htmldb/f] timed out
please help....................I am DBA, let me tell what this application does , there is a button for getting a file which triggers some unix script to get file from ftp server.
it runs this pls sql package begin dbms_scheduler.run_job('PROD_GET_SL_FILES'); end;
After it gets the file and loads them to the database using sql loader then it zipp and email the files, after this process the next thing is to display the page with the message "Success: SL Files Zipped and Emailed"
It does every thing but to dispaly that message , then after some time i get
page not found and the page is "htmldb/wwv_flow.accept "
Other thing i noticed is it sends me an email with zipped files twice, the first one has attachements of the files the second one without attachement. -
HTTP 404 Error : Page Not Found
I recieved a *"HTTP 404 Error: Page Not Found"* when I branch via Branch To Page Identified By Item using the application_item F103_NEXT_PAGE as the item. I looked at the apache error log and found the following error message:
[Tue May 26 16:47:13 2009] [error] mod_plsql: /pls/apexcfp8/wwv_flow.accept HTTP-404 \nwwv_flow.accept: SIGNATURE (parameter names) MISMATCH\nVARIABLES IN FORM NOT IN PROCEDURE: CURRENTELEM\nNON-DEFAULT VARIABLES IN PROCEDURE NOT IN FORM: \n
I still recieved the same *"HTTP 404 Error: Page Not Found"* when I branch via Go to Page using the application_item *&F103_NEXT_PAGE.* as the page.
Can someone please help me. I am under a tight deadline and I cannot test the application further until this is resolved.
Thank you in advance.
Robertops, sorry, you already made that test, didn't you?
The fact is i am testing on XE so there is no Apache in between.
I guess that you are getting HTTP 404 whereas i get a different message.
My best guess is that the item doesn't contain the value you say at the time of branching.
Another possibility is that you think it is using that branch, but it is conditional and the condition is not met, but there are no further branches to process and apex doesn't know where to branch to.
Does any of the above make sense? -
Error is not getting logged in error file while running dataload maxl
Hello All,
I am running a Maxl to load data in a database which is running fine but noted a weird issue that the errors are not getting logged in error file. Suppose i changed the name of data file then it should give error something like
ERROR - {Error no.} - Unable to open file {filename} which should be logged in error file but my error file is still empty.
I am using the Maxl -
import database {dbname} data from data_file {filename} on error append to "D:/Error/errorfile.err";
Any inputs please...
ThanksTry to use single quotes and the backslash. It may depend on the operating system and /or the version of essbase used. This is an example from one of my maxls:
on error append to 'D:\Hyperion\logfiles\myload.err';
cheers, chris -
Open Item not getting Cleared automatically
Dear Sir,
For a GL "Cenvat Clearing" , we have ticked the option "open Item Management" in FS00 .
Our business scenario is as below :
After MIGO , we do excise posting using J1IEX and here in the posted Fi document the GL "Cenvat Clearing" gets Credited . Subsequently during the MIRO this GL i.e "Cenvat Claering" gets Debited .
My problem is that when I see in FBL3n for this GL the relevant transaction still appear under the open Items . Pl guide me , as what is the reason for this entry not getting cleared automatically .
Regards
B Mittal
RegarPO number cannot be taken as sort feild hence the value is in blank always.
You need to identify some value for this feild and as a process you need to tell your users to incorporate the same at the time of doing MIRO.
Or other wise you can take out the assignment of sort key to this GL account, and as a process you can instruct your user to use reference feild and input a value. If you fell that this is a tedious process,
the Identify another feild that is common for both debit and credit line items and try to post with a common valuie using, one ABAP program which will update this feild. Mind that this feild need to be in the OB74.
reward if useful
sarma -
GR/IR Clearing a/c not getting cleared..
Dear All,
My GR/IR clearing account is not getting cleared automatically after Invoice posting..is it the standard behavior or anything
missing?
For example- GR/IR Clearing a/c is 13110100,when GRN is done it is getting credited and once invoice is posted it gets
debited so it should show cleared when we run FS10N / FBL3N
please let me know whether it is needed to clear manually?
NarenHi
F.13 is for executing the setting configured under Financial Accounting -> General Ledger Account -> Business Transactions ->Open item clearing - > Prepare Automatic clearing. In this place, the GL account needs to be updated with the relevant criteria like, what are the fields to be matched for clearing like Reference field, assignment, etc.
After that, if F.13 is executed for this GL account then it will clear based on the criteria specified above.
Hope it clarifies
Regards
Lakshmanan Krishnan -
Vendor Account not getting Cleared.
Dear All,
First of all thanks everyone for your support till date.
I have an issue. When I am trying to clear a vendor account from F-44 its not getting cleared. Its showing a negative balance of Cash discount and is not getting adjusted with any account.
However when I am processing the open item for the same vendor in FBL1N. The total is 0.
Can any one suggest how to go ahead and clear this account.
Thanks & regards
Om Prakash guptaDear All,
Any updates on this issue as it has become a serious problem here. There ia an objection from Auditor.
Kindly Suggest.
Regards
OM -
UWL items not getting cleared after performing action
Hello
We are on EP 7.0.
We are experiencing a strange behaviorin UWL.
When end users receive workitems in their inbox and they take the appropriate actions, the workitems still stay in the inbox. Normally they should no longer appear.
I have tried the refresh in the UWL iview but no luck.
It seems to work in DEV and other landscape. It does no work in Production. The software installation of UWL are the same across all landscapes.
Is there any other setting that is required. In SAP GUI this is not an issue.
Any feedback or tips would be helpful. thanks.
Regards,
SunilHi,
As far as I can remember, this is a known limitation of UWL.
Please, check this thread : UWL work item not getting cleared
I am unsure whether you use the correct button the refresh the UWL (it is well hidden!), check the slide 6 in this document :
http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/20f4843e-314f-2a10-2a88-8c4afa20dda6&overridelayout=true
Best regards,
Guillaume -
SD Reversal not getting Cleared
Hi Experts,
When an invoice is getting posted in SD and subsequently when such invoice is cancelled, the line item is not getting cleared. In FBL5n it is showing both the line items as open for all these cases. Please advice
Thanks in AdvanceHi,
VF11 only cancell the invoice and post the reversal document in FI.
First you clear the original document and reversal document manually in FI
use T code F-32 or automatically in F.13
It is related to OB74 setting for this Cusotmer' Recon Acc
please Check the OSS notes 1259505 and Note 400000 -
SOCO requiremnts not getting cleared.
Hello Freinds,
I am working on SRM 5.0 classic scenario( with support pack 11). The requiremnts are not getting cleared although follow on docs are created for them ( PO). This is happening for only goods shopping carts and not for the limit.
Any inputs on this will be highly appriciated.
Regards
SRM USERHi Muthu ,
I have check the code , But i sisnt see any difference , Infact we didn done any change recently . It was working fine beofre support pack and still working fine in another system aftter support pack .this Badi code is same in the both systems .
you can also have look into this code.zsrm_sourcing is a custom table where we are maintaing document type and account assignment catogory for catalog items.
Thank you .
Get details of shopping cart.
CALL FUNCTION 'BBP_PD_SC_ITEM_GETDETAIL'
EXPORTING
i_guid = item_bbp_guid
IMPORTING
E_ITEM = ls_item
ET_ATTACH = lt_attach
TABLES
E_ACCOUNT = lt_account
E_PARTNER = lt_partner.
If lt_attach got any records sourcing needs to be done.
SET SOURCING parameter to 'X'.
IF lt_attach[] IS NOT INITIAL.
SOURCING = 'X'.
EXIT.
ENDIF.
If lt_partner doenst contain a fixed vendor, sourcing
needs to be carried out.
READ TABLE lt_partner TRANSPORTING NO FIELDS
WITH KEY partner_fct = c_vendor. " Fixed vendor
IF NOT sy-subrc IS INITIAL.
SOURCING = 'X'.
EXIT.
ELSE.
If there is a fixed vendor, but item is not assigned to
account assignment category, EXPENSE or INTERNAL ORDER .
Sourcing needs to be carried out for this case.
Load table with sourcing rules
SELECT * FROM zsrm_sourcing
INTO TABLE lt_sourcing.
CLEAR SOURCING.
LOOP AT lt_account ASSIGNING <fs_account>.
READ TABLE lt_sourcing TRANSPORTING NO FIELDS
WITH KEY acc_cat = <fs_account>-acc_cat
skip_sourcing = c_x.
IF sy-subrc IS NOT INITIAL.
SOURCING = 'X'.
EXIT.
ENDIF.
ENDLOOP.
ENDIF.
Maybe you are looking for
-
My iTunes won't connect to the store or sync my iPod. What's wrong?!?!
It says it's syncing the iPod Touch, but it takes a really long time, and after a while, iTunes "stopped responding." I can view my iTunes account, but that's it. It says it's connecting to the store, but the loading bar starts around half-way and af
-
How to keep images in my flex site not by embedding..
should i always embedd my project while exporting and uploading in site..cant i do it in any other way
-
Bringing up the help popup in an interactive report
The gear dropdown on an interactive search, has a help, that when clicked on would bring up a popup explaining the icons of the gear search. I created a button and trying to bring up this help when the user clicks on it. How would I go about doing th
-
Touch smart not opening windows or after I play a game it won't do anything
I had to send my touch smart in for maintenance and since it has been returned it won't shut down, won't open any windows, I try to run Norton and it freezes, I am getting very annoyed, got it in 2010 and never had any serious issues until now.
-
I don't know what I changed yesterday on Firefox so that it saves the "cookies" from certain sites, but I must have changed something that I didn't meant to. Now when I am in Outlook and I want to click on any of the links I get an error - THIS OPERA