Recorded in ON Location Using Fire Wire, but in Prem Pro CS-4 I get No Sound

I have done playback of recordings using On Location but when I import to
CS-4 there is no sound. These files also then stall my computer. Can anyone give me some advice?

Why not answer my question if you want help? Does your "ordinary keyboard that has midi capabilities" have a transpose function or a split keyboard mode that you may have accidentally activated? Did you try the solution I offered you?

Similar Messages

I'm using iTunes 10.6.1 on an iMac 2,66 Ghz intel core Duo with8GB DDR3 and Lion 10.7.3 I hav 260000 mp3 stored on A My Book 3 TB external Fire wire 800 Drive - when I play songs I get short interuptions every 20 to 30 seconds. Can't iTunes handle that?

I'm using iTunes 10.6.1 on an iMac 2,66 Ghz intel core Duo with8GB DDR3 and Lion 10.7.3 I have 260000 mp3 stored on a My Book 3 TB external fire wire 800 Drive - when I play songs I get short interruptions every 20 to 30 seconds. Can't iTunes handle that number of songs?

I'm using iTunes 10.6.1 on an iMac 2,66 Ghz intel core Duo with8GB DDR3 and Lion 10.7.3 I have 260000 mp3 stored on a My Book 3 TB external fire wire 800 Drive - when I play songs I get short interruptions every 20 to 30 seconds. Can't iTunes handle that number of songs?

My users folder has 140GB used on it, but I cannot find where it is getting that calculation. I went through all of my folders and opened them all in an info panel, and they all come out to about 30GBs. Where is the rest of the data? -Using Mountain Lion

My users folder has 140GB used on it, but I cannot find where it is getting that calculation. I went through all of my folders and opened them all in an info panel, and they all come out to about 30GBs. Where is the rest of the data? -Using Mountain Lion

First, empty the Trash if you haven't already done so.
Use a tool such as OmniDiskSweeper (ODS) to explore your volume and find out what's taking up the space. You can delete files with it, but don't do that unless you're sure that you know what you're deleting and that all data is safely backed up. That means you have multiple backups, not just one.
Proceed further only if the problem hasn't been solved.
ODS can't see the whole filesystem when you run it just by double-clicking; it only sees files that you have permission to read. To see everything, you have to run it as root.
Back up all data now.
Install ODS in the Applications folder as usual.
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Triple-click the line of text below to select it, then drag or copy — do not type — into the Terminal window:
sudo /Applications/OmniDiskSweeper.app/Contents/MacOS/OmniDiskSweeper
Press return. You'll be prompted for your login password, which won't be displayed when you type it. You may get a one-time warning not to screw up.
I don't recommend that you make a habit of doing this. Don't delete anything while running ODS as root. If something needs to be deleted, make sure you know what it is and how it got there, and then delete it by other, safer, means.
When you're done with ODS, quit it and also quit Terminal.

Video capture stops when connected to FCP using fire wire

Captured video using Sony VX2000 using 48 khz and 16 bit audio stereo mode. Using Sony Premium miniDV tapes.
Video plays back fine when not connected via firewire to G4 dual 867 with 2 GB Ram.
Using default capture preset of 48 khz 16 bit, connect fire wire and video capture randomly stops stating it has lost connection or is missing capture data. If I switch to just plain capture using non controllable device, I have the same issue except the tape keeps playing but FCP stops capturing.
Tried other tapes and no problem.
Tried other fire wire cable and no problem.
I am having problems only on this tape and when connected.
When not connected it plays back on the camera with no stopping.
Steve Bowers

To answer your questions--
Dumping preferences usually does not cause problems. More likely you updated some part of your system or are having other hardware issues.
No updates or hardware issues. The original problem (discussed in another thread) was one where the video is skewed inward on the lower right corner. Apple instructed me to dump the preferences and start from scratch. That I did and now I am experiencing problems I did not have before. If it is hardware problems, then I guess it is just coincidental that FCP is just now presenting problems. However, the other problems I am having are software related and does not involve the camera.
What software versions of FCP, OSX and QT are you running and have you updated any of them recently?
FCP version-5.1.2
OSX-10.4.8
QT-7.1.3
Is there anything special about the 'difficult' tape?
No.
Did you record it?
Yes
Was it the last of a bunch?
Not sure. I buy bulk so this was one in a box of 5 that is was in a case of 50 boxes.
Are you using the same camera as the playback device?
Yes
Does it work if you use another computer?
Not sure what you mean. I have only one MAC G4.
Was it recorded using another camera in a non-DV format?
No. Playback is through same camera is was recorded on.

Why can't I use fire-wire to sync my ipod?!?!

The system won't allow me to synch my ipod with fire wire!! Why!?! I just bought a super nice mac pro you would think they would let me step it from from SLOW USB!!!!!!!!

Firewire support was discontinued with the introduction of the the 5th Generation iPod and the iPod Nano so it hasn't been an option for quite a while now. Current iPods will charge over Firewire but they no longer sync using it. You can send your feedback on it's absence directly to Apple at this link: Apple Product Feedback

Connecting AirPort Express using Fire Wire

Hi, can't see this posted anywhere else. Have been running my MacBook Pro off my AirPort Express quite happily for some time. However recently purchased a Sonos S5 that needs to connect to my wireless router via ethernet. Only problem is the Airport Exp. only has the one ethernet port. So figured I could use the FireWire connection for the Airport/Modem and then the ethernet for the Airport/Sonos.
Only problem is I need to configure the FireWire in System Preferences and despite my attempts at guessing configuration I have no idea what I am actually doing. Not sure if it's an easy answer, but if anyone can help with config I would be very grateful.

Hi, thanks for the response and sorry that I am unclear - not my area of specialty.
Currently I have my airport express router that connects to my modem via ethernet.
I purchased a sonos unit that streams music over the internet and plays it through the unit. It uses its own base station/router to connect to my wireless network so the main unit then becomes wireless and I can move it any where in my house.
As I understand this base unit needs to connect into my router via ethernet. The problem is the Airport Express has one ethernet port and one fire wire port. I was hoping to get around this by using the fire wire to connect to my modem, and then that would leave the ethernet port free for the Sonos base unit.
In case I have just been confusing again the manual for the Sonos refers to the ethernet connection 'use category 5 ethernet cable to connect to a router, computer or additional network device'
This might not be possible, just assumed fire wire would work but no idea how to configure. Possibly it will involve me having to buy a hub (or extreme) to get multiple ethernet ports.
Thanks for your help - I am (obviously) lost here so any advice is great!!

Migration using fire wire or wi-fi.

Bought an iMac and want to transfer the files from Mac Book Pro to it. Salesguy suggested using a fire wire. Started the migration app and the transfer is taking several hours. Both are connected to my wi-fi. Should it take this long? Is the wire being used? The salesguy made it sound like it would happen quickly. Thanks!

The problem is, Apple dropped some windows for the setup of Setup Assistant and Migration Assistant.
Before Lion, after selecting From Another Mac, you'd get a window where you could select FireWire, Ethernet, or WIFI.
For some reason, now the From Another Mac option is network only (I think it will use Ethernet if it's connected, otherwise WIFI). But to transfer via Firewire, you must select From Time Machine or other disk. Apparently, you're supposed to figure that out on your own, since Target Disk Mode makes the old Mac look like an external disk. (Wonderfully intuitive, no?)
That's covered in the Help for Migration Assistant, but there's no Help button in it's menubar, so you have to hunt for it.
Oh, and they dropped the Learn More button, too.
By the way, if you created a user account, then used the Migration Assistant app (rather than using Setup Assistant when prompted at startup), it will not put the data in the account you created; it will be in the account you transferred, and that account may not have permission to any files it may have on other drives.
Sigh.

I purchased a Maxtor Ext. Hardrive several years ago and cannot locate the fire wire. Since then I want to take the files that are on the Maxtor and transfer them to a new PC I purchased. What is the best way to go about doing that?

I purchased a Maxtor External Hard Drive several years ago and cannot locate the Fire Cable that came with it. I want to transfer the files in the Maxtor to a new PC I recently purchased. How would I go about doing that?

Just buy a new cable

Mac Pro to PC running XP using Fire Wire?

Is this a possible setup? any links or suggestions?

I'd like to second Eric's iFelix recommendation (Tiger to XP Networking). It took me and a work colleague who'd never done much networking before 2 minutes flat to get Panther/XP talking.
For further reference you've posted in the iMac Flat Panel forum
You will be better to post in the iMac Early 2006 forums in future
- the users there will share more common experiences.
mrtotes

Some of the music I had on CDs is no longer available in my itunes. It says that it is located on the "icloud", but I have no idea how to get it back so I can listen to it!

All of a sudden about 35% of my music has a grayish download button beside it. When I go to redownload it, it won't let me do anything. Then, when I check the location, it states it's in the icloud.
How do I get all my music back into my itunes - other than redownloading all the CDS. It's all music that I have purchased, so I'm not sure how it even got put into icloud, and can't be found in my itunes file. WHen I go to see if it's gone of the drive, it's still in there, and I can play it through the media player, but it won't show up on itunes.
What can I do? Thanks for any help. Paula

See Empty/corrupt library after upgrade/crash.
tt2

I don't know how to transfer my "saved photos" from my itouch onto my pc which is windows vista, it used to work but now it won't let me get to it anymore...HELP!!!!

i have 2 itouches the newest one still allows me to access the "saved photos"...but the older itouch the first one i got, now just doesn't let me do it, it wont even pull up the "auto play" that allows me to browse through the files in the folder i have for it. I have a windows vista i'm using for this...the pics on the older itouch are very important to me
so please help!!!!!!!!!!!!!!!!!!!!!!

d.fromcarrollton wrote:
i did as it said but now it's saying the synch server wont work and the auto play still does not appear like it should
What is the exact error message?
B-rock

Using Time Capsule, but my MBP HD seems to be getting fuller

Hello: I have a 1TB Time Capsule which U have been using to back up my HD for about a week or so. Not long ago I had 15GB of free space on my MBP's HD, now I have zero. I did not download 15GB of date in that week. Any ideas what is going on? How do I find that 15GB of data and delete it? Was the date being backed up to my internal HD instead of my Time Capsule?
Thanks in advance

Additional info: I see that there is something on my HD named Back of James' MacBook Pro, and in it are all my backups. Is this what is filling my HD? Why are these here and not on the Time Capsule? The icon for this is an external drive.

I paid for adobe reader to convert pfs to excel. It used to work but now it does not. I get "error while siging in message" but I am signed in. Please fix this or advise.

Adobe no longer converts pdfs to Excel or Word. I continually get error while signing in message. But I am signed in. I paid for service and expect it to work. I can get no help form adobe. Please help now.

Hi adoberror,
I'm sorry that you're having trouble with ExportPDF. Can you please try the following to resolve this sign-in issue:
Choose Edit > Preferences (Windows) or Adobe Reader > Preferences (Mac)
Click 'Adobe Online Services' on the left-hand side
Sign out of our Adobe ID and sign back in.
Try to convert your document again.
If you continue to have trouble, please verify that you can access the service via the web interface. To do this:
Open a browser and navigate to http://exportpdf.acrobat.com/signin.html
Try to log in with your Adobe ID (email address) and password
Once logged in, follow the on-screen prompts to convert a file
Please let me know how it goes.
Best,
Sara

I am using Dreamweaver CS4 but when I try to launch I get an error code 150:30 and then an Ftp error after Ok is pressed on the first error. How do I resolve the issue?

How do I resolve error 150:30 with an FTP error following the closing of the window for the first error?

Mac?
Really pay attention to the Important: items here:
Error "Licensing has stopped working" | Mac OS

HT204291 No video when using Airplay with some of my apps. I just get the sound.

When I am using Airplay on my IPad and using the Redbox Instant app I just get sound on my Apple TV and no video. What is wrong?

It hasn't been enabled for airplay, that is something the developer has to do

Recorded in ON Location Using Fire Wire, but in Prem Pro CS-4 I get No Sound

Similar Messages

Maybe you are looking for