Recorded Programs Not Showing Up on Separate STB

Hello all,
I have my 6416 in the bedroom and a 7100 in my living room. There are a number of programs, whether its scheduled or one off recordings, that do not show up in the DVR list on the 7100 in the living room. Is this a bug or something that can be rectified.
Thanks,
Steve

Similar Messages

Update Record Does Not Show in Server Behaviors Pane

I am using Dreamweaver CS4 on a Windows 7 machine. I am coding in ASP VBScript. When I apply an Update Record behavior to a form and upload the file to the server, it works fine. However, the Update Record does not show in the Server Behaviors pane. Therefore, I cannot click on it to make further edits to it. When I open this same file in Dreamweaver CS3 on a Windows XP machine, I do see the Update Record behavior in the Server Behaviors pane and I can click on it to make it edits. What do I need to do to get the Update Record behavior to show?

Probably not the answer you are looking for, but support for traditional ASP has not been a focus of DW development, nor has it been for Windows 7 for
that matter. ASP is a "depreciated" language and support for it is dwindling. The I don't know exact reason for what is happening to you here, but I'd imagine it's an issue with CS4s translators and the combination of the feature sets in both Win 7 and CS4 not "worrying" about ASP as much as they used to.
Lawrence Cramer *Adobe Community Professional*
www.Cartweaver.com
Complete Shopping Cart Application for
Dreamweaver, available in PHP and CF
Stay updated - http://blog.cartweaver.com

Records are not showing

what is wrong with this code? it is not showing my 7 records.
the output is this [LINK|http://i338.photobucket.com/albums/n440/googleb0y/album1/output01.jpg]
when i use the debugger, intenal table is empty. [LINK|http://i338.photobucket.com/albums/n440/googleb0y/album1/debug01.jpg]
where did i go wrong? thanks for the help.
data: begin of WA,
        MYUID       type ZADDRESSBOOK-USERID,
        MYFNAME     type ZADDRESSBOOK-FNAME,
        MYLNAME     type ZADDRESSBOOK-LNAME,
      end of WA.
data: ITAB like table of WA.
select USERID FNAME LNAME
      from ZADDRESSBOOK
      into corresponding fields of table ITAB.
write: / SY-DBCNT, 'records found'.
if sy-subrc eq 0.
    loop at ITAB into WA.
      write: / WA-MYUID, WA-MYFNAME, WA-MYLNAME.
    endloop.
endif.

Ur problem is with the select statement...
data: begin of WA,
        MYUID       type ZADDRESSBOOK-USERID,
        MYFNAME     type ZADDRESSBOOK-FNAME,
        MYLNAME     type ZADDRESSBOOK-LNAME,
      end of WA.
data: ITAB like table of WA.
select USERID FNAME LNAME
      from ZADDRESSBOOK
      into corresponding fields of table ITAB.
write: / SY-DBCNT, 'records found'.
if sy-subrc eq 0.
    loop at ITAB into WA.
      write: / WA-MYUID, WA-MYFNAME, WA-MYLNAME.
    endloop.
endif.
When u use corresponding fields of addition SAP searches for same field names in table itab but u declare ur table with diff. field names..thats why these records are not entered into the table..as same field names are not found in the table...so to avoid it pl. try.this code:
data: begin of WA,
        MYUID          type ZADDRESSBOOK-USERID,
        MYFNAME     type ZADDRESSBOOK-FNAME,
        MYLNAME     type ZADDRESSBOOK-LNAME,
      end of WA.
data: ITAB like table of WA.
select USERID FNAME LNAME
      from ZADDRESSBOOK
      into table ITAB.
write: / SY-DBCNT, 'records found'.
if sy-subrc eq 0.
    loop at ITAB into WA.
      write: / WA-MYUID, WA-MYFNAME, WA-MYLNAME.
    endloop.
endif.
Regards,
Joy.

Condition records are not showing in Invoice

Hi Experts,
My List price for XXXX material is amount $$$$$. Condition records having required validity.
But the values are not showing in invoice though the pricing analysis shows green for this condition type.
Condition values shown perfectly in preceeding documents.
Analysis message says " Condition record exists but has not been set "
Can you please suggest me, why this condition values are not shown in net value and suggest me the fis.
Thank you in advance.
Edited by: Ganesh B on Feb 4, 2010 4:45 AM

Hi,
Goto the T. Code "VF03".
Enter your billing document number.Enter.Check what is the pricing procedure determined here.Goto the T.Code "V/08".Check whether that condition type present in that procedure.
If so check the validity of the condition records.Ensure it falls under your billing document date.Also ensure that it is not marked for deletion.For this goto the last column in the condition record screen "VK12 T.Code".Ensure that this check box is not ticked.
And you are telling that you are able get this one in previous documents.
Goto the T.Code "VTFA(if your scenario is order related billing)" else goto the T.Code "VTFL(If your scenario is delivery-related billing)".
Select your valid combination.Double click on item.Select your item category.Details.
Make the Pricing type as "D" and pricing source as "blank".
Regards,
Krishna.

Program not showing all the details

hi everybody,
i had modified one standard program where the code i have written will show the material description. Ok when i test the program in quality serever it is working fine but when i test it in my production server it is not showing the material description text. what may be the reason.
regards,
siri.

hi,
Check whether the changes have been transported to production .
check whether the description has been given for the material in database table.
Do compare the programs between development and production thru version management.
Rewards points if it is helpful
Regards,
Sangeetha.A

Program not showing in open with context for HTML files

I have a windows 8.1 64 Pro PC with a program called 1stPage.exe installed.
When I right click a .txt file I get 'Edit with 1st Page' in the context menu and it also shows in the open
with menu.
However HTML files do not show these options. I have checked the registry and it would appear that the program
is set up on the open with menu exactly the same for both file types.
So it would appear that something is blocking 1stPage from showing against HTML files but I can't figure out
what I need to change.
Cheers
Baz

OK we have further developments
I tried installing this program on a Windows 7 32bit machine and I get exactly the same issue.
I tried it with both IE and chrome as default browsers and I tried changing default html editor.
I therefore suspect this when this program installs it is not setting all the registry entries windows 7/8
require.
I know it's an old program but I have been using it for years and see no reason to change.
So I need help in understanding what I need to do to get windows 7/8 to display the context menu entry correctly

LSMW record is not shows Product Attributes section for Tcode XD02

Please advise me what changes required to resolve the following issue.
"I am trying to record Tcode: XD02 (customer change) using LSMW, I choose Sales tab, Product attributes section is not showing up under Sales Tab. But Product attribute section is populate when change the customer manually (without LSMW)."
I unable to attach Screen shots here. Will be send to mail if needed.
Please mail any documentation to [email protected]

I solved this problem by myself. FYI while loading Product hirarchy data there is a filed called ISMHIERARCHLEVL which we need to assign the category, '1' for family, '2' for product and '3' for issue.
Thanks,
Raj

Purchase info record is not showing in po.

Hi all,
while creating purchase order i m giving purchase info record no but values from info record
is not updating in purchase order.plz help.
best regards.

Hi Nissinha,
There are so many ways to be analysed for the cause. Because PIR -Purchase info record:
Please check in order of priority while diagnosing and finding for the solution:
1. Check wether the PIR is created for the Vendor of that perticular material or not.
2. Check for the validity (valid upto which date) mentioned in the PIR
3. Check for the type of Info record (based on Item category) it is such as Standard, Sub contracting, etc
Hope it clarifies
Regards,
Sapsrin

Some Open programs not showing indicator light in dock in 10.8

After upgrade to OSX 10.8 some applications are not showing the indicator light in dock when they are open, even with the check box checked in dock preferences. Also, the only App available in command+tab is Finder. I think these are related.

I've seen this around various forums. It seems to be a bug although I haven't gone looking/asking to see if someone at Apple has noted it.
There are two fixes. Restart or open terminal and run:
killall -KILL Dock
This will restart just the dock and that should fix the dock and the cmd+tab (which is part of the same process).

FTP program not showing Airport Disk folders or files

I have just recently changed my wireless router to an Airport Extreme (gigabit) from a Netgear WNR854T (that was having up-time issues). I have an old PC that I use for an FTP server control with the Serv-U package. When I had the WNR854T running I just had an external drive attached to the PC via USB and the program would map it as a path with no stress.
Now that I have the Airport Disk function on the Extreme I have moved the external drive (which is actually 2 x 500GB SATA drives in a dual bay enclosure, formatted as separate OSX Extended drives) to the port on the back. This is working great for my wireless PowerBooks and MacBook, and my PC (which is wired ethernet) has the 2 drives mapped as X and Y, and I have no trouble moving, creating or re-naming files within Explorer.
The issue I currently have is that the FTP package will see the Airport Disk (the one I want to use is X:/) and I can make it show up within Serv-U ... but it simply will not open when I login remotely to give me a list of folders contained in X:/ ... it will let me look at the windows c:/ though.
My 3 questions are:
- has anyone else experienced this problem??
- do you think this is a PC issue and I should find a cheap Mac Mini and make a new FTP server (with something like PureFTP for control)??
- does the above make sense at all??
Thank-you!
Message was edited by: frankle

I have now set up my Powerbook G4 with Pure FPTd Manager and I am still getting intermittent issues.
Every now and then (but very rarely) it will connect fine but on the whole I am not getting a connection. It seems like there is a problem with listing what is actually in the directory as Cyberduck will show the directory but then it contains nothing.
Can some people let me know about their successful FTP server with an Airport Extreme Gigabit??
Thanks.

Os x server 10.4 dns record screen not showing

i may be a complete idiot here, but i recently installed the os x server 10.4 and my and dns allwos me to add zones but not records for that zone.
i never see a screen allowing me to choose A, MX, CNAME, etc. records.
i have configured QuickDNS Pro before, and have it currently pointing to me os x server, since i can't configure the dns on that machine. and i have configured os x server (10.1, 10.3 and 10.4 before) so i know these items can be tough to find, but i think something is just not right on my install.
i swear i've clicked every button and tab on that Admin app.
i've been poking aorund for a screen shot of what it should show me but i'm still looking.
any ideas?
G4 cube Mac OS X (10.4.8)

The DNS GUI is heavily disguised as a 'user friendly' interface so you might just not be recognising the correct area. For starters it never actually mentions things like A or CNAME records!
To describe where the 'button' is...
On DNS-> Settings page...
When you add the zone (click the + button), there should be two tabs at the top...
General (which it opens at to add the zone name, etc. and...
Machines - click this... which takes you to the machines pane...
Under the machines pane there should be a "+" button which, when clicked, allows you to add other machines' IP addresses (A records), and optionally with 'aliases' (CNAMES).
Unfortunately, this GUI seems to be far from intuitive - particularly for anyone who knows the basics of DNS. It has been designed for real basic stuff. E.g., it automatically adds reverse records.
You are far better of doing it manually and not bother with gui. In fact, if you do it manually the gui will probably be unable to convert back since it expects it to be in a real particular form. And never be tempted to try editing in the gui after manually editing since it will almost certainly goose the files!
-david
Server 10.4.8

HT201272 Records bought not showing my in my iTunes library

I have a record that I have bought on iTunes that shows present in my computer's library but it isn't there!
How can I get my record back? I checked under "present o this computer" and it says it is there but it is not there....

Yes, me too! It is really upsetting my that I have to manually add artwork to my iphone. Fix?

Photos Program Not Showing All Options

I updated my iPhone's OS to iOS4 yesterday. In my Photos program, I am missing two tabs at the bottom of the program window, the Faces tab most notably. I only have the Albums and Places tabs.
This means that I cannot created folders or move my pictures as I thought I was going to be able to.
Can someone provide me with an answer as to why this happened or what I need to do to resolve the issue?
Thank you.

I had Events and Faces... and then it went away. Even Anandtech.com (http://www.anandtech.com/show/3779/apples-ios-4-explored/5) only shows Albums and Places. I have verified that I have Faces checked in iTunes for syncing.
How many photos do you have in your library? I started out with <2000. It seems that as soon as I piled on more photos, the Events and Faces options disappeared. I have 9700 on the phone right now.

Records does not show up for TOP N

hello...i have a variable with a TOP 4 condition in the query, when i run the report with the selection of date input with the variable range of 1 year, i cannot view the data for that report, i checked the cube that there are data in the cube, but when i execute the report, the portal sayin that there are no "characteristic calendar/year month has no master data for "200701", "200702"....
i checked the data and everything is okay...is just that the data won't be diplayed out. any idea???

Hi FluffyToffee,
Just check whether is there any other Condition defined with your required Condition?
2nd Check : Check whether your required condition is defined properly or not i.e. on your required characteristic or all the characteristic.
Regards,
Rajdeep.

Record time not showing in approval tab for user

Hello Gurus,
It a very strange kind of issue. As you can see in the screenshot , the first approval has approved the PO and then ideally it should go to the second approver and it happening but while checking in the portal we can't see the record time in the portal , Also user has to approve the PO several times which is making the user unhappy . So how to remove this bug . While more to add we are working on ACW with custom BADI's (copied of standard with addition condition). Can anyone tell me why its happening.
Thanks
Gaurav Gautam

Hello Gurus,
Any idea on this.. Konstantin Anikeev , Laurent Burtaire
Thanks
Gaurav Gautam

Recorded Programs Not Showing Up on Separate STB

Similar Messages

Maybe you are looking for