Recording and soud output

Hi,
I'm having troubles hearing my recording. I've seen many posts in this forums about "no sound" topics but I didn't find a solution to my problem yet, so my post. I have the impression Logic is using the same audio unit for output than for input.
I've been using the configuration wizard to setup my external audio unit, a digital preamp (on which I can connect a mic or a guitar) connected by USB to the Mac. The setup has selected one input and two outputs. However I don't want Logic to use these outputs, but the internal outputs of my Mac.
I've got an audio object, which I used for recording, configured to use CoreAudio as peripheral, "Track 1" as track, "Output 1-2" as output. These outputs seem to be those of my external audio unit, but this is not what I want, I want the internal Mac outputs. I've has a look at the environment window but without much success.
-fred
Mac OS X (10.4.3)

ok, had to create an aggregate, saw this in an another post in this forum. Problem solved.
-fred

Similar Messages

Extractor via FM, if relations between db records and output is not 1:1

Hi,
I developed extractor via function module using SAP template FM RSAX_BIW_GET_DATA_SIMPLE. But I need multiply cursor (db) records, it means relation between db records and extractor output is not 1:1. How do You solve this problem.

If you are saying your records fetched by cursor fetch are then to be processed such that there are multiple records to go to BW for each fetched ones, that is doable.
Fetch your records into a local internal table instead, do the processing and pass the resultant records to the tab that goes back to BW. You only need to make an adjustment to package_size that you specify to the cursor fetch statement. Instead of i_maxsize, pass a value which is divided by the multiplication factor (eg if you create 5 records out of 1 fetched rec, pass the size as a value = i_maxsize/5). If this is not fixed, give an approx so your final no of records are roughly close to the i_maxsize.

Rows to columns/Transpose the records Query and Display output

hi ,
can anyone help me query this and transpose it to this format?
i am still a beginner in sql.
thanks for help!
Rows to columns/Transpose the records Query and Display output
id     startdate     endate
1111     1/2/2001     11/3/2001
1111     2/5/2002     4/3/2002
1111     2/6/2000     2/5/2001
3333     5/2/2003     11/3/2003
3333     6/2/2003     12/3/2003
3333     2/6/2005     2/5/2005
desired output
id     startdate1     endate1     startdate2     endate2     startdate3     endate3
1111     1/2/2001     11/3/2001     2/5/2002     4/3/2002     2/6/2000     2/5/2001
3333     5/2/2003     11/3/2003     6/2/2003     12/3/2003     2/6/2005     2/5/2005

Have you only 3 dates for each id ?
So, try :
SQL> l
1 with tbl as
2 (select 1111 as id, to_date('01/02/2001','DD/MM/YYYY') startdate, to_date('11/03/2001','DD/MM/YYYY') enddate from dual union all
3 select 1111 as id, to_date('02/05/2002','DD/MM/YYYY') startdate, to_date('04/03/2002','DD/MM/YYYY') enddate from dual union all
4 select 1111 as id, to_date('02/06/2000','DD/MM/YYYY') startdate, to_date('02/05/2001','DD/MM/YYYY') enddate from dual union all
5 select 3333 as id, to_date('05/02/2003','DD/MM/YYYY') startdate, to_date('11/03/2003','DD/MM/YYYY') enddate from dual union all
6 select 3333 as id, to_date('06/02/2003','DD/MM/YYYY') startdate, to_date('12/03/2003','DD/MM/YYYY') enddate from dual union all
7 select 3333 as id, to_date('02/06/2005','DD/MM/YYYY') startdate, to_date('02/05/2005','DD/MM/YYYY') enddate from dual )
8 select id, max(decode(dr,1,startdate)) start1,
9             max(decode(dr,1,enddate)) end1,
10             max(decode(dr,2,startdate)) start2,
11             max(decode(dr,2,enddate)) end2,
12             max(decode(dr,3,startdate)) start3,
13             max(decode(dr,3,enddate)) end3
14 from (select id, startdate,enddate, dense_rank() over (partition by id order by startdate) dr from tbl)
15* group by id
SQL> /
                                                ID START1   END1     START2   END2     START3   END3
                                              1111 02/06/00 02/05/01 01/02/01 11/03/01 02/05/02 04/03/02
                                              3333 05/02/03 11/03/03 06/02/03 12/03/03 02/06/05 02/05/05
SQL> HTH,
Nicolas.

Record and Playback performance goes down at high frequency

Hi,
We're testing record and playback using USRP-2920( LV 2013sp1, NI-USRP 14)
To test it, we downloaded record and playback example code.
Signal source is a function generator outputting 6 MHz bandwidth 8 VSB modulation signal.
USRP Rx parameters are center = variant / gain = 0 / IQ rate = 25MHz and Tx parameters are center = same as Rx center / gain = 0 / IQ rate = 25MHz
The problem is... in low carrier frequency like 70MHz, quality of playback signal is great.
But in high carrier freqency like 2.2GHz, SNR and signal power dropped significantly i.e. they tend to drop as carrier frequency goes high.
And the strange thing is as carrier frequency is increased, a small peak on the center is increased as well.
Please check the attatched file to see the tendancy.
So.. my question is why is this tendancy occures?(we tested another USRP and the result was same as before)
and what should we do to reduce this effect?
Regards,
Youngmin
Attachments:
record and playback results.xls ‏469 KB

Hi,
I suggest a couple of things:
NI USRP 2920 is a non-calibrated device. So setting a gain value of 0 at different frequencies could mean a different actual gain. So try increasing the Rx recording gain (on the USRP) in cases where you observe low SNR. Similarly Tx is not calibrated.
Is the signal recording done with cables or over wireless medium ? You can try to eliminate any spurious signals if you use SMA cables while recording.
I think the power at the center of the spectrum is the DC offset. You may refer to the DC Offset/LO leakage section in the best practices section here http://www.ni.com/white-paper/13881/en/
Thanks.

How to retreive and display output list from BAPI

Hello
I am making an applcation using SUP 2.0, and this application make an user to get leave history using a Mobile System from SUP.
I've created the MBO as Attributes using the BAPI: BAPI_LEAVE_HISTORY.
This BAPI has some parameters IN and OUT.
Input parameters are Employee Id and date.
The parameter OUT is a List that retreives the employee leave history.
Anyone has an Idea or example how to retreive the output from BAPI and displaying the output on a screen.
Any tips or blogs that can help me?
Thanks all!
Satish

Hi David Brandow,
I have tried your solution where I just created a MBO for my 'operation' and I'm using sync parameters to execute the RFC.
The problem I'm facing is, for example, if I create a record it gets saved in the MBO table and the record successfully gets created in SAP as well after a sync. But when I create another record and sync, the previously saved record in MBO table also gets executed so I'm getting duplicate entries in SAP.
Have you or anyone faced this problem?
Any response is appreciated. Please let me know if I'm not clear, I realized its a complicated scenario.
Thanks,
Sandeep

Capturing error records and messages in BDC ?

Hi Experts,
I am recording a infotype using BDC recording and I got successfull updation in recording.But I dont want the output message generated by BDC recording which is obtained by perform bdc_transaction using 'pa30' generated by recording.
I want to capture the success pernr values and its correponding messages in a seperate internal table.Then want to capture error pernr values and its messages in a seperate internal table.
Give me sample coding to fetch those values. Think that my internal table which contains pernr values for recording is int_0007.from this internal table I am recording values.Give me coding to collect success anf error pernr values and its messges in seperate internal table.
Thanks,
Sakthi.C
*Assure points for valuable answers*
Message was edited by:
        Sakthi Saravanan C

DATA : BEGIN OF T_UPLOAD OCCURS 0,
         MATNR LIKE MARA-MATNR,
         MAKTX LIKE MAKT-MAKTX,
         PLANT LIKE RMMG1-WERKS,
       END OF T_UPLOAD.
DATA : BEGIN OF T_DOWNLOAD OCCURS 0,
         MATNR LIKE MARA-MATNR,
         MAKTX LIKE MAKT-MAKTX,
         PLANT LIKE RMMG1-WERKS,
         MSG(200),
       END OF T_DOWNLOAD.
DATA : T_BDCMSGCOLL TYPE TABLE OF BDCMSGCOLL WITH HEADER LINE.
DATA : WA_BDCMSGCOLL TYPE BDCMSGCOLL.
DATA : ERR_LOG TYPE MESSAGE.
Set the parameters for Call Transaction
CLEAR WA_CTU_PARAMS.
WA_CTU_PARAMS-DISMODE = 'N'.
WA_CTU_PARAMS-UPDMODE = 'S'.
WA_CTU_PARAMS-NOBINPT = 'X'.
WA_CTU_PARAMS-NOBIEND = 'X'.
WA_CTU_PARAMS-DEFSIZE = 'X'.
Call Transaction MM01
IF W_FLAG NE 'X'.
    <b>CALL TRANSACTION 'MM01' USING T_BDCDATA OPTIONS FROM WA_CTU_PARAMS
                                             MESSAGES INTO T_BDCMSGCOLL.
    COMMIT WORK AND WAIT.</b>
    DESCRIBE TABLE T_BDCMSGCOLL LINES N.
    IF N <> 0.
      LOOP AT T_BDCMSGCOLL INTO WA_BDCMSGCOLL.
        CLEAR ERR_LOG.
        W_MSGNO = WA_BDCMSGCOLL-MSGNR.
        CALL FUNCTION <b>'WRITE_MESSAGE'</b>          EXPORTING
            MSGID = WA_BDCMSGCOLL-MSGID
            MSGNO = W_MSGNO
            MSGTY = WA_BDCMSGCOLL-MSGTYP
          IMPORTING
            MESSG = ERR_LOG.
Error that occurs during transactoon
        IF ERR_LOG-MSGTY = 'E'.
          MOVE-CORRESPONDING T_UPLOAD TO T_DOWNLOAD.
          MOVE ERR_LOG-MSGTX TO T_DOWNLOAD-MSG.
          APPEND T_DOWNLOAD.
        ENDIF.
      ENDLOOP.
    ENDIF.
ENDIF.
regards
vinod

Recording a DVD with LG DVD Recorder and FIOS Standard Set Top Box

I have FIOS Standard Set Top Box, a Sony TV, and an LG DVD Recorder. I cannot figure out how to record a TV program on my LG DVD Recorder. I have 3 remotes: a FIOS Remote, an LG DVD Recorder Remote and a Sony TV Remote. What remote/s should I use, and in what order? Thanks.

1) Connect coax (cable) wire from the wall to the RF input on the back of the STB.
2) Connect coax (cable) from the cable out (might say "to TV/VCR") on the back to the STB to the cable in on the back of the TV.
3) Connect composite (red, yellow, white) wires from the back of the STB to the input of the DVD player.
4) Connect composite (red, yellow, white) wires from the back of the DVD player to the back of the TV.
Let me know if any of those aren't possible based on your equipment. The SD STB (QIP 2500) has very few outputs so there are not a lot of options for a setup like this).
In order to record a program, you will have to do the following:
-Set the STB to whatever channel you want to record and keep it on. You will not be able to change the channel, because the DVD player will be recording whatever the STB outputs (the same feed the TV gets). With FiOS, it is not possible to have a DVD do the tuning for you, because it is an all-digital signal and most DVD players can only tune to analog chs 1-99.
-Set the DVD player channel to "input" or something of the like. This will get your DVD player to show the signal from the STB.
-Set your TV channel to composite input. This will show you whatever the DVD player is getting from the STB.
-If you want to watch normal TV without the DVD player, you can turn your TV to Ch. 3 or 4 and get the feed from the STB without having to turn on your DVD player.

How to get the record selected in ztable based record in the output of alv

Hi All,
I have developed a report, it is displaying the output in ALV format.The list contained some 20 fields along with MATERIAL and BATCH. I have provided menu bar as extras -> ztable(it also contained MATERIAL and BATCH). But I have some issue when I select any record in the output then go to
path extras -> ztable, it has to select the record in ztable based MATERIAL and BATCH which i have selected in the output, then can you please provide solution for the above problem.
Thanks in advance

Hi Dolly,
you can do this by,
data: index_rows type lvc_t_row,
      index like line of index_rows.
* Get Selected rows from alv grid
clear index_rows. refresh index_rows.
"When you choose extras->ztable
call method alv_grid->get_selected_rows
           importing
                 et_index_rows = index_rows.
* Now delete those rows from the ALV grid
loop at index_rows into index.
    read table itab index index-index. "Lets say itab is the table you are displaying
    if sy-subrc = 0.
     perform bdc_sm30. "do simple bdc for sm30 with tab name and selected values
    endif.
endloop.
Regards,
Manoj Kumar P
Edited by: Manoj Kumar on Feb 23, 2009 2:49 PM

Recording and playing sound input from mic simultaneously in iphone/ipad

I want to simultaneously record and play the sound from a mic in iphone. As thecricket commentory application.
Please provide me a solution for this.
Is this possible in iOs.

This probably isn't going to sound very helpful, for which I apologise in advance, but I'm afraid it's the truth...
The only way you stand any way of doing any of this is by using ASIO4ALL, which can aggregate different drivers from multiple devices. But I don't rate your chances too highly, I'm afraid - USB mics have long been the problem child of computer-based audio. On top of that, you are trying to get sounds in and out of a separate device at the same time - not only that, but it's a Creative Labs gamer's device and they are second only to USB mics in terms of the 'difficult' stakes - search this forum!
A much, much better way to attempt to do this would be to use a sensible ASIO external device with sufficient inputs, and a mic that plugs into it, not a USB one. That way you could route the inputs and outputs appropriately, and use the device's monitoring so that you could monitor what you need to. I wouldn't attempt to do anything like this any other way, I'm afraid. Another approach (which can be made to work well) is to use an external mixer to do most of the work - often it's easier to set up the monitoring on these. You can get mixers with the appropriate interface built-in, and they don't cost a fortune either. Mackie and Behringer make suitable devices.

How to select a record and delete using sereen painter in alv

Hi experts i have displayed a table in selection sereen
in alv by using table control(sereen painter).
My request is to display the database table records
when i press F8.
I also have two buttons one is 'DELETE'
and another one is 'INSERT'.
My request is i have to select a particular record in
the output and if i press the 'delete' button means
then the selected record should be deleted in that table
and also in database table.
Like if i insert a new record means then the record
should be inserted in that table and database table...
Kindly plz send the coding immediately............

Hi,
create a module in ur PROCESS AFTER INPUT fro eg
MODULE select.
select * from db into table itab.
module delete.
db-field = wa-field(this is the field u r going to delete in ur table control and in database table).
append wa to itab.
delete <db table> from itab.
module insert.
db-field = wa-field(this is the field u r going to insert in ur table control and database table )
append wa to itab.
insert <db table> from itab.
regards,
dhaya..

Comparing 3 CSV Files and generating output to 4th One..

Hi,
I was trying to compare 3 different CSV files using the common field EmplID and generate output with the combination of all the CSV's. The fields in the CSV are below
CSV1 : EmplID,HName,Name,PreferredName,Location,Department
CSV2 : HName,EmplID,first_name,last_name,email
CSV3 : Emplid,Extension
I would like to generate the output CSV as below..
OutputCSV :EmplID,Hname,Name,PreferredName,Location,Department,first_name,last_name,email,Extension
The below script works but as it is comparing the data by row by row, it takes huge time to complete.. Can anybody suggest how can i improve the performance of the same...
$CSV1 = Import-CSV "Abc.CSV"
$CSV2 = Import-CSV "DEF.CSV"
$CSV3 = Import-CSV "GHI.CSV"
$Merged = ForEach($Record in $CSV1){
Add-Member -InputObject $Record -NotePropertyName 'first_name' -NotePropertyValue ($CSV2|Where{$_.EmplID -eq $Record.EmplID}|Select -Expand first_name)
Add-Member -InputObject $Record -NotePropertyName 'last_name' -NotePropertyValue ($CSV2|Where{$_.EmplID -eq $Record.EmplID}|Select -Expand last_name)
Add-Member -InputObject $Record -NotePropertyName 'email' -NotePropertyValue ($CSV2|Where{$_.EmplID -eq $Record.EmplID}|Select -Expand email)
Add-Member -InputObject $Record -NotePropertyName 'Extension' -NotePropertyValue ($CSV3|Where{$_.EmplID -eq $Record.EmplID}|Select -Expand Extension) -PassThru
$Merged | Export-CSV C:\Path\To\New.CSV -NoTypeInfo

Hi RP,
you can do this by creating a dictionary that uses the Employee ID as key. This allows you to iterate over each Csv only once and add values to the correct object each time. Didn't test it, but this ought to do the trick:
$CSV1 = Import-CSV "Abc.CSV"
$CSV2 = Import-CSV "DEF.CSV"
$CSV3 = Import-CSV "GHI.CSV"
$Hash = @{ }
foreach ($Record in $CSV1)
$Hash[$Record.EmplID] = $Record | Select EmplID, Hname, Name, PreferredName, Location, Department, first_name, last_name, email, Extension
foreach ($Record in $CSV2)
try
$Hash[$Record.EmplID].first_name = $Record.first_name
$Hash[$Record.EmplID].last_name = $Record.last_name
$Hash[$Record.EmplID].email = $Record.email
catch
Write-Warning "[Csv2]Failed to process $($Record.emplID): $($_.Exception.Message)"
foreach ($Record in $CSV3)
try
$Hash[$Record.EmplID].Extension = $Record.Extension
catch
Write-Warning "[Csv3]Failed to process $($Record.emplID): $($_.Exception.Message)"
$Hash.Values | Export-CSV C:\Path\To\New.CSV -NoTypeInfo
Cheers,
Fred
There's no place like 127.0.0.1

DAQ Record and Playback

I have a PCI-6534 DAQ card in a PC and I am trying to record and then playback some motor encoder signals. I used DAQAssistant to create the code and then I have tried to modularize it a bit. I'm guessing I broke something, but I am not sure what.
My problem is that the playback refuses to work and gives me various errors depending on which "lines" parameter I pass in. The lines parameter I use is the same on the recording functions and the playback.
I started by first trying to record on Dev1/port0/lines0:2. Recording worked fine and it produced the required datafile. When I go to play back the file, I get the message
Partial use of physical lines within a physical port is not supported by this device, given the requested Sample Timing Type.
Consider specifying the entire port and tristating the lines you do not want driven.
Property: SampTimingType
Requested Value: Sample Clock
So then I go back and record on Dev1/port0. Again it records fine, but on playback with the same device, I get...
Requested creation of a separate channel for each line is not possible when a digital port is specified as the physical channel.
Specify a range of digital lines, such as "Dev1/port0/line0:7", as the physical channel.
Physical Channel Name: Dev1/port0
HoKay, so I go back again and record on "Dev1/port0/line0:7". Again it records fine and on playback I get...
When writing, supply data for all channels in the task. Alternatively, modify the task to contain the same number of channels as the data written.
Number of Channels in Task: 8
Number of Channels in Data: 1
I am at a loss as to why I can record so easily, but playbacks are a b***h. Help!
Attached are my VI's that I am using.
Brian Rose
Attachments:
DAQ.zip ‏279 KB

I think I figured it out.
When I created the DAQ VIs using DAQAssistant, I did so by selecting individual lines. When I changed things around to get playback to work, I simply changed the text field going into the lines to be "Dev1/port0". I could never get this to work.
I went back and regenerated the playback VIs using DAQAssistant, this time specifying a port output (instead of lines). This time it read and played the data fine.
The moral is that if you use DAQAssistant to generate VIs, be very careful when you change the parameters on those VIs.
Attached is my new test program which works well.
Brian Rose
Attachments:
EncoderTest.zip ‏269 KB

I HAVE A SOURCE TABLE WITH 10 RECORDS AND TARGET TABLE 15 RECORDS. MY WUESTION IS USING WITH THE TABLE COMPARISON TRANSFORM I WANT TO DELETE UNMATCHED RECORDS FROM THE TARGET TABLE ??

I HAVE A SOURCE TABLE WITH 10 RECORDS AND TARGET TABLE 15 RECORDS. MY QUESTION IS USING WITH THE TABLE COMPARISON TRANSFORM .I WANT TO DELETE UNMATCHED RECORDS FROM THE TARGET TABLE ?? HOW IT IS ??

Hi Kishore,
First identify deleted records by selecting "Detect deleted rows from comparison table" feature in Table Comparison
Then Use Map Operation with Input row type as "delete" and output row type as "delete" to delete records from target table.

How to maintain a condition record for a output type ?

Hi All
How to maintain a condition record for a output type ?

Hi,
Goto NACE and there is a button for maintiaining the Condition Reocrds.

How to print the error records and success records in bdc

how to print the number of error records and success records in bdc

hai,
plz refer this program,
Z_130399130271_A
REPORT Z_130399130271_A
       NO STANDARD PAGE HEADING LINE-SIZE 325.
*INCLUDE YVALIDATE.
*include bdcrecx1.
INCLUDE YINCLUDE399.
DATA ITAB LIKE TABLE OF FILE_TABLE WITH HEADER LINE.
PARAMETERS: DATASET(132) LOWER CASE.
DATA : RC TYPE I,
ERR(40) TYPE C,
SUCCESSCNT TYPE I VALUE 0,
FAILCOUNT TYPE I VALUE 0.
   DO NOT CHANGE - the generated data section - DO NOT CHANGE    ***
If it is nessesary to change the data section use the rules:
1.) Each definition of a field exists of two lines
2.) The first line shows exactly the comment
      '* data element: ' followed with the data element
      which describes the field.
      If you don't have a data element use the
      comment without a data element name
3.) The second line shows the fieldname of the
      structure, the fieldname must consist of
      a fieldname and optional the character '_' and
      three numbers and the field length in brackets
4.) Each field must be type C.
Generated data section with specific formatting - DO NOT CHANGE ***
DATA: BEGIN OF RECORD OCCURS 0,
data element: LIF16
        LIFNR_001(016),
data element: KTOKK
        KTOKK_002(004),
data element: ANRED
        ANRED_003(015),
data element: NAME1_GP
        NAME1_004(035),
data element: SORTL
        SORTL_005(010),
data element: STRAS_GP
        STRAS_006(035),
data element: PFACH
        PFACH_007(010),
data element: ORT01_GP
        ORT01_008(035),
data element: ORT02_GP
        ORT02_009(035),
data element: LAND1_GP
        LAND1_010(003),
data element: REGIO
        REGIO_011(003),
data element: SPRAS
        SPRAS_012(002),
data element: TELF1
        TELF1_013(016),
data element: TELF2
        TELF2_014(016),
data element: BANKS
        BANKS_01_015(003),
data element: BANKK
        BANKL_01_016(015),
data element: BANKN
        BANKN_01_017(018),
      END OF RECORD.
DATA:   BEGIN OF ERRORITAB OCCURS 0,
        LIFNR_001 LIKE LFA1-LIFNR,
        KTOKK_002 LIKE LFA1-KTOKK,
        ANRED_003 LIKE LFA1-ANRED,
        NAME1_004 LIKE LFA1-NAME1,
        SORTL_005 LIKE LFA1-SORTL,
        STRAS_006 LIKE LFA1-STRAS,
        PFACH_007 LIKE LFA1-PFACH,
        ORT01_008 LIKE LFA1-ORT01,
        ORT02_009 LIKE LFA1-ORT02,
        LAND1_010 LIKE LFA1-LAND1,
        REGIO_011 LIKE LFA1-REGIO,
        SPRAS_012 LIKE LFA1-SPRAS,
        TELF1_013 LIKE LFA1-TELF1,
        TELF2_014 LIKE LFA1-TELF2,
        BANKS_01_015 LIKE LFBK-BANKS,
        BANKL_01_016 LIKE LFBK-BANKL,
        BANKN_01_017 LIKE LFBK-BANKN,
        ERRORMSG(60) TYPE C,
        SERIAL TYPE I VALUE '1',
    END OF ERRORITAB.
End generated data section ***
AT SELECTION-SCREEN ON VALUE-REQUEST FOR DATASET.
CALL FUNCTION 'TMP_GUI_FILE_OPEN_DIALOG'
EXPORTING
    WINDOW_TITLE            = 'select a file '
    DEFAULT_EXTENSION       = 'TXT'
    DEFAULT_FILENAME        = 'ASSIGN5.TXT'
FILE_FILTER             =
INIT_DIRECTORY          =
MULTISELECTION          =
IMPORTING
RC                      =
    TABLES
      FILE_TABLE              = ITAB
EXCEPTIONS
   CNTL_ERROR              = 1
   OTHERS                  = 2
IF SY-SUBRC <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
            WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
READ TABLE ITAB INDEX 1.
DATASET = ITAB-FILENAME.
WRITE DATASET.
START-OF-SELECTION.
*perform open_dataset using dataset.
*perform open_group.
DATA T TYPE STRING.
T = DATASET.
IF T EQ ' '.
    MESSAGE E110(ZX).
ENDIF.
CALL FUNCTION 'GUI_UPLOAD'
    EXPORTING
      FILENAME                      = T
FILETYPE                      = 'ASC'
      HAS_FIELD_SEPARATOR           = 'X'
HEADER_LENGTH                 = 0
READ_BY_LINE                  = 'X'
DAT_MODE                      = ' '
CODEPAGE                      = ' '
IGNORE_CERR                   = ABAP_TRUE
REPLACEMENT                   = '#'
CHECK_BOM                     = ' '
IMPORTING
FILELENGTH                    =
HEADER                        =
    TABLES
      DATA_TAB                      = RECORD
EXCEPTIONS
FILE_OPEN_ERROR               = 1
FILE_READ_ERROR               = 2
NO_BATCH                      = 3
GUI_REFUSE_FILETRANSFER       = 4
INVALID_TYPE                  = 5
NO_AUTHORITY                  = 6
UNKNOWN_ERROR                 = 7
BAD_DATA_FORMAT               = 8
HEADER_NOT_ALLOWED            = 9
SEPARATOR_NOT_ALLOWED         = 10
HEADER_TOO_LONG               = 11
UNKNOWN_DP_ERROR              = 12
ACCESS_DENIED                 = 13
DP_OUT_OF_MEMORY              = 14
DISK_FULL                     = 15
DP_TIMEOUT                    = 16
OTHERS                        = 17
IF SY-SUBRC <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
           WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
LOOP AT RECORD.
    CLEAR RC.
    CLEAR ERR.
*read dataset dataset into record.
    IF SY-SUBRC <> 0. EXIT. ENDIF.
    RECORD-KTOKK_002 = '0001'.
    PERFORM BDC_DYNPRO      USING 'SAPMF02K' '0100'.
    PERFORM BDC_FIELD       USING 'BDC_CURSOR'
                                  'RF02K-KTOKK'.
    PERFORM BDC_FIELD       USING 'BDC_OKCODE'
                                  '/00'.
    PERFORM BDC_FIELD       USING 'RF02K-LIFNR'
                                  RECORD-LIFNR_001.
    PERFORM BDC_FIELD       USING 'RF02K-KTOKK'
                                  RECORD-KTOKK_002.
    PERFORM BDC_DYNPRO      USING 'SAPMF02K' '0110'.
    PERFORM BDC_FIELD       USING 'BDC_CURSOR'
                                  'LFA1-TELX1'.
    PERFORM BDC_FIELD       USING 'BDC_OKCODE'
                                  '/00'.
    PERFORM BDC_FIELD       USING 'LFA1-ANRED'
                                  RECORD-ANRED_003.
    PERFORM BDC_FIELD       USING 'LFA1-NAME1'
                                  RECORD-NAME1_004.
    PERFORM BDC_FIELD       USING 'LFA1-SORTL'
                                  RECORD-SORTL_005.
    PERFORM BDC_FIELD       USING 'LFA1-STRAS'
                                  RECORD-STRAS_006.
    PERFORM BDC_FIELD       USING 'LFA1-PFACH'
                                  RECORD-PFACH_007.
    PERFORM BDC_FIELD       USING 'LFA1-ORT01'
                                  RECORD-ORT01_008.
    PERFORM BDC_FIELD       USING 'LFA1-ORT02'
                                  RECORD-ORT02_009.
    PERFORM BDC_FIELD       USING 'LFA1-LAND1'
                                  RECORD-LAND1_010.
    PERFORM BDC_FIELD       USING 'LFA1-REGIO'
                                  RECORD-REGIO_011.
    PERFORM BDC_FIELD       USING 'LFA1-SPRAS'
                                  RECORD-SPRAS_012.
    PERFORM BDC_FIELD       USING 'LFA1-TELF1'
                                  RECORD-TELF1_013.
    PERFORM BDC_FIELD       USING 'LFA1-TELF2'
                                  RECORD-TELF2_014.
    PERFORM BDC_DYNPRO      USING 'SAPMF02K' '0120'.
    PERFORM BDC_FIELD       USING 'BDC_CURSOR'
                                  'LFA1-KUNNR'.
    PERFORM BDC_FIELD       USING 'BDC_OKCODE'
                                  '=VW'.
    PERFORM BDC_DYNPRO      USING 'SAPMF02K' '0130'.
    PERFORM BDC_FIELD       USING 'BDC_CURSOR'
                                  'LFBK-BANKN(01)'.
    PERFORM BDC_FIELD       USING 'BDC_OKCODE'
                                  '=ENTR'.
    PERFORM BDC_FIELD       USING 'LFBK-BANKS(01)'
                                  RECORD-BANKS_01_015.
    PERFORM BDC_FIELD       USING 'LFBK-BANKL(01)'
                                  RECORD-BANKL_01_016.
    PERFORM BDC_FIELD       USING 'LFBK-BANKN(01)'
                                  RECORD-BANKN_01_017.
    PERFORM BDC_DYNPRO      USING 'SAPMF02K' '0130'.
    PERFORM BDC_FIELD       USING 'BDC_CURSOR'
                                  'LFBK-BANKS(01)'.
    PERFORM BDC_FIELD       USING 'BDC_OKCODE'
                                  '=UPDA'.
    PERFORM BDC_TRANSACTION USING 'XK01' CHANGING ERR RC.
    DATA: SERIAL TYPE I VALUE 1.
    IF RC <> 0.
      FAILCOUNT = FAILCOUNT + 1.
      CLEAR ERRORITAB.
      ERRORITAB-SERIAL = SERIAL.
      ERRORITAB-LIFNR_001 = RECORD-LIFNR_001.
      ERRORITAB-KTOKK_002 = RECORD-KTOKK_002.
      ERRORITAB-ANRED_003 = RECORD-ANRED_003.
      ERRORITAB-NAME1_004 = RECORD-NAME1_004.
      ERRORITAB-SORTL_005 = RECORD-SORTL_005.
      ERRORITAB-STRAS_006 = RECORD-STRAS_006.
      ERRORITAB-PFACH_007 = RECORD-PFACH_007.
      ERRORITAB-ORT01_008 = RECORD-ORT01_008.
      ERRORITAB-ORT02_009 = RECORD-ORT02_009.
      ERRORITAB-LAND1_010 = RECORD-LAND1_010.
      ERRORITAB-REGIO_011 = RECORD-REGIO_011.
      ERRORITAB-SPRAS_012 = RECORD-SPRAS_012.
      ERRORITAB-TELF1_013 = RECORD-TELF1_013.
      ERRORITAB-TELF2_014 = RECORD-TELF2_014.
      ERRORITAB-BANKS_01_015 = RECORD-BANKS_01_015.
      ERRORITAB-BANKL_01_016 = RECORD-BANKL_01_016.
      ERRORITAB-BANKN_01_017 = RECORD-BANKN_01_017.
      ERRORITAB-ERRORMSG = ERR.
      SERIAL = SERIAL + 1.
      APPEND ERRORITAB.
      MODIFY RECORD TRANSPORTING KTOKK_002.
      DELETE RECORD WHERE KTOKK_002 = '0001'.
    ELSE.
      SUCCESSCNT = SUCCESSCNT + 1.
    ENDIF.
ENDLOOP.
display output********************************************************
SKIP.
FORMAT COLOR 5 INTENSIFIED OFF.
WRITE:/ 'No. of records successfully uploaded: '.
FORMAT COLOR 4 INTENSIFIED OFF.
WRITE: SUCCESSCNT.
Displaying the success table******************************************
IF SUCCESSCNT <> 0.
    SKIP.
    FORMAT COLOR 4 INTENSIFIED OFF.
    WRITE:/ 'Successful Records'.
    FORMAT COLOR 7 INTENSIFIED ON.
    WRITE:/(261) SY-ULINE,
          / SY-VLINE,
            'S.NO',                               007 SY-VLINE,
            'VENDOR ACC.NUM',                     023 SY-VLINE,
            'VENDOR ACC GROUP',                   041 SY-VLINE,
            'TITLE',                              048 SY-VLINE,
            'VENDOR NAME',                        064 SY-VLINE,
            'SORT FIELD',                         076 SY-VLINE,
            'HOUSE NO.& STREET',                  101 SY-VLINE,
            'PO.BOX NO',                          116 SY-VLINE,
            'CITY',                               129 SY-VLINE,
            'DISTRICT',                           141 SY-VLINE,
            'COUNTRY KEY',                        156 SY-VLINE,
            'REGION',                             166 SY-VLINE,
            'LANGUAGE KEY',                       180 SY-VLINE,
            'TELEPHONE NO 1',                     196 SY-VLINE,
            'TELEPHONE NO 2',                     213 SY-VLINE,
            'BANK COUNTRY KEY',                   231 SY-VLINE,
            'BANK KEY',                           241 SY-VLINE,
            'BANK ACC.NO',                        261 SY-VLINE,
            /1(261) SY-ULINE.
    FORMAT COLOR 4 INTENSIFIED ON.
    SERIAL = 1.
   SORT RECORD BY LIFNR_001.
    LOOP AT RECORD.
      WRITE:/ SY-VLINE,
      SERIAL LEFT-JUSTIFIED,          007 SY-VLINE,
      RECORD-LIFNR_001(016),          023 SY-VLINE,
      RECORD-KTOKK_002(004),          041 SY-VLINE,
      RECORD-ANRED_003(015),          048 SY-VLINE,
      RECORD-NAME1_004(035),          064 SY-VLINE,
      RECORD-SORTL_005(010),          076 SY-VLINE,
      RECORD-STRAS_006(035),          101 SY-VLINE,
      RECORD-PFACH_007(010),          116 SY-VLINE,
      RECORD-ORT01_008(035),          129 SY-VLINE,
      RECORD-ORT02_009(035),          141 SY-VLINE,
      RECORD-LAND1_010(003),          156 SY-VLINE,
      RECORD-REGIO_011(003),          166 SY-VLINE,
      RECORD-SPRAS_012(002),          180 SY-VLINE,
      RECORD-TELF1_013(016),          196 SY-VLINE,
      RECORD-TELF2_014(016),          213 SY-VLINE,
      RECORD-BANKS_01_015(003),       231 SY-VLINE,
      RECORD-BANKL_01_016(015),       241 SY-VLINE,
      RECORD-BANKN_01_017(018),       261 SY-VLINE.
      WRITE:/(261) SY-ULINE.
      SERIAL = SERIAL + 1.
    ENDLOOP.
    WRITE:/1(261) SY-ULINE.
ENDIF.
SKIP.
FORMAT COLOR 5 INTENSIFIED OFF.
WRITE:/ 'No. of records not uploaded: '.
FORMAT COLOR 4 INTENSIFIED OFF.
WRITE: FAILCOUNT.
*Displaying the error table
IF FAILCOUNT <> 0.
    SKIP.
    FORMAT COLOR 4 INTENSIFIED OFF.
    WRITE:/(320) SY-ULINE,
            'Error Records'.
    FORMAT COLOR 7 INTENSIFIED ON.
    WRITE:/ SY-ULINE, SY-VLINE,
            'S.NO',                               007 SY-VLINE,
            'VENDOR ACC.NUM',                     023 SY-VLINE,
            'VENDOR ACC GROUP',                   041 SY-VLINE,
            'TITLE',                              048 SY-VLINE,
            'VENDOR NAME',                        064 SY-VLINE,
            'SORT FIELD',                         076 SY-VLINE,
            'HOUSE NO.& STREET',                  101 SY-VLINE,
            'PO.BOX NO',                          116 SY-VLINE,
            'CITY',                               129 SY-VLINE,
            'DISTRICT',                           141 SY-VLINE,
            'COUNTRY KEY',                        156 SY-VLINE,
            'REGION',                             166 SY-VLINE,
            'LANGUAGE KEY',                       180 SY-VLINE,
            'TELEPHONE NO 1',                     196 SY-VLINE,
            'TELEPHONE NO 2',                     213 SY-VLINE,
            'BANK COUNTRY KEY',                   231 SY-VLINE,
            'BANK KEY',                           241 SY-VLINE,
            'BANK ACC.NO',                        261 SY-VLINE,
            'ERROR MESSAGE',                      320 SY-VLINE.
    WRITE:/(320) SY-ULINE.
    FORMAT COLOR 4 INTENSIFIED ON.
   SORT ERRORITAB BY LIFNR_001.
    LOOP AT ERRORITAB.
      WRITE:/ SY-VLINE,
            ERRORITAB-SERIAL LEFT-JUSTIFIED,          007 SY-VLINE,
            ERRORITAB-LIFNR_001 ,       023 SY-VLINE,
            ERRORITAB-KTOKK_002,       041 SY-VLINE,
            ERRORITAB-ANRED_003,       048 SY-VLINE,
            ERRORITAB-NAME1_004,       064 SY-VLINE,
            ERRORITAB-SORTL_005,       076 SY-VLINE,
            ERRORITAB-STRAS_006,       101 SY-VLINE,
            ERRORITAB-PFACH_007,       116 SY-VLINE,
            ERRORITAB-ORT01_008,       129 SY-VLINE,
            ERRORITAB-ORT02_009,       141 SY-VLINE,
            ERRORITAB-LAND1_010,       156 SY-VLINE,
            ERRORITAB-REGIO_011,       166 SY-VLINE,
            ERRORITAB-SPRAS_012,       180 SY-VLINE,
            ERRORITAB-TELF1_013,       196 SY-VLINE,
            ERRORITAB-TELF2_014,       213 SY-VLINE,
            ERRORITAB-BANKS_01_015,    231 SY-VLINE,
            ERRORITAB-BANKL_01_016,    241 SY-VLINE,
            ERRORITAB-BANKN_01_017,    261 SY-VLINE,
            ERRORITAB-ERRORMSG,        320 SY-VLINE.
      WRITE:/(320) SY-ULINE.
    ENDLOOP.
    WRITE:/ SY-ULINE.
ENDIF.
hope this ll help you..
regards,
prema.A

Recording and soud output

Similar Messages

Maybe you are looking for