Recording different scenario of WebCamera and AudioPublisher

Hi,
I do recording of WebCamera and AudioPublisher and found the following results.
1. Recording using RTMFP protocol with player 10.1 lccs.swc: (WebCamera and AudioPublisher are not working)
12:55:15 GMT+0600    RECEIVENODES UserManager
12:55:15 GMT+0600    receiveAllSynchData UserManager
12:55:15 GMT+0600    RECEIVENODES FileManager
12:55:15 GMT+0600    receiveAllSynchData FileManager
12:55:15 GMT+0600    checkManagerSync:[object FileManager]
12:55:15 GMT+0600    RECEIVENODES AVManager
12:55:15 GMT+0600    mainNetStatusHandler: NetGroup.Connect.Success
12:55:15 GMT+0600    NetGroup Creation Successful
12:55:15 GMT+0600    NetGroup Creation Successful
12:55:15 GMT+0600    receiveAllSynchData AVManager
12:55:15 GMT+0600    checkManagerSync:[object StreamManager]
12:55:15 GMT+0600    RECEIVENODES RoomManager
12:55:15 GMT+0600    mainNetStatusHandler: NetGroup.Connect.Success
12:55:15 GMT+0600    NetGroup Creation Successful
12:55:15 GMT+0600    NetGroup Creation Successful
12:55:15 GMT+0600    mainNetStatusHandler: NetGroup.Connect.Success
12:55:15 GMT+0600    NetGroup Creation Successful
12:55:15 GMT+0600    NetGroup Creation Successful
12:55:15 GMT+0600    receiveAllSynchData RoomManager
12:55:15 GMT+0600    checkManagerSync:[object RoomManager]
12:55:15 GMT+0600    checkManagerSync:[object UserManager]
12:55:16 GMT+0600    RECEIVENODES myCamera
12:55:16 GMT+0600    receiveAllSynchData myCamera
12:55:16 GMT+0600    mainNetStatusHandler: NetStream.Connect.Success
12:55:16 GMT+0600    mainNetStatusHandler: NetStream.Connect.Success
2. Recording using RTMFP protocol with player 10.1 lccs.swc: (WebCamera and AudioPublisher are working)
after ConnectSessionContainer creationComplete added the following line
cSession.streamManager.maxP2PStreamPublish = 0;
12:58:58 GMT+0600    RECEIVENODES UserManager
12:58:58 GMT+0600    receiveAllSynchData UserManager
12:58:58 GMT+0600    RECEIVENODES FileManager
12:58:58 GMT+0600    receiveAllSynchData FileManager
12:58:58 GMT+0600    checkManagerSync:[object FileManager]
12:58:58 GMT+0600    RECEIVENODES AVManager
12:58:58 GMT+0600    receiveAllSynchData AVManager
12:58:58 GMT+0600    checkManagerSync:[object StreamManager]
12:58:58 GMT+0600    RECEIVENODES RoomManager
12:58:58 GMT+0600    mainNetStatusHandler: NetGroup.Connect.Success
12:58:58 GMT+0600    NetGroup Creation Successful
12:58:58 GMT+0600    NetGroup Creation Successful
12:58:58 GMT+0600    mainNetStatusHandler: NetGroup.Connect.Success
12:58:58 GMT+0600    NetGroup Creation Successful
12:58:58 GMT+0600    NetGroup Creation Successful
12:58:58 GMT+0600    mainNetStatusHandler: NetGroup.Connect.Success
12:58:58 GMT+0600    NetGroup Creation Successful
12:58:58 GMT+0600    NetGroup Creation Successful
12:58:58 GMT+0600    receiveAllSynchData RoomManager
12:58:58 GMT+0600    checkManagerSync:[object RoomManager]
12:58:58 GMT+0600    checkManagerSync:[object UserManager]
12:58:59 GMT+0600    RECEIVENODES myCamera
12:58:59 GMT+0600    receiveAllSynchData myCamera
12:58:59 GMT+0600    The total stream limit for P2P streams have
3. Recording using RTMPS protocol with player 10.1 lccs.swc: (WebCamera and AudioPublisher are working)
13:03:14 GMT+0600    RECEIVENODES UserManager
13:03:14 GMT+0600    receiveAllSynchData UserManager
13:03:14 GMT+0600    Setting isPeer to false as connection is not RTMFP for User
13:03:14 GMT+0600    RECEIVENODES FileManager
13:03:14 GMT+0600    receiveAllSynchData FileManager
13:03:14 GMT+0600    checkManagerSync:[object FileManager]
13:03:14 GMT+0600    RECEIVENODES AVManager
13:03:14 GMT+0600    receiveAllSynchData AVManager
13:03:14 GMT+0600    checkManagerSync:[object StreamManager]
13:03:14 GMT+0600    RECEIVENODES RoomManager
13:03:15 GMT+0600    receiveAllSynchData RoomManager
13:03:15 GMT+0600    checkManagerSync:[object RoomManager]
13:03:15 GMT+0600    checkManagerSync:[object UserManager]
13:03:15 GMT+0600    RECEIVENODES myCamera
13:03:15 GMT+0600    receiveAllSynchData myCamera
Is there any issues for Recording using RTMFP protocol with player 10.1 lccs.swc?
Regards,
John

Hi,
I'm thinking you've posted to the wrong group here - have a look at the programming language you're using, (LabWindows\CVI or LabVIEW) or post to the Multi-function I/O group at http://exchange.ni.com/servlet/ProcessRequest?RHIVEID=101&RPAGEID=8&RFORMNUMBER=3&RHIDETAG=TRUE&UCATEGORY_0=_30&UCATEGORY_S=0
On a side note, I can't see why you shouldn't be able to set up this kind of measurement. The method you'll need depends on what speed you want to read those inputs at. You can set them up on a trigger, and then read the stored values, or you could just grab the analog followed by the counters, it depends on your required timing - simultaneously could be taken as zero time between each, but there'll always be some delay between the analog input channels, unless you
've got a simultaneous sampling board.
On the topic of mutlithreading, you don't say what you're refering to - LabVIEW and LabWindows\CVI can both handle multithreading, as can TestStand, although this requires a programming language to interface to the hardware. NI Hardware can handle calling from multiple threads, as long as the handles to the card are handled correctly - i.e. mutliple threads initialising the board at different times will over-write the previous threads setup - you need to create some sort of session manager within your program. (TestStand is designed as a test executive, and therefore used to bring together various hardware, and since it can go multithreaded for batch and parallel testing, TestStand 2.0.1f1 comes with it's own session manager)
Hope that helps
S.
// it takes almost no time to rate an answer

Similar Messages

  • I've tried 2 different screen capture devices, and in both cases, audio stops recording after 20 or 30 seconds, but video is fine.  The audio disappears

    I've tried 2 different screen capture devices, and in both cases, audio stops recording after 20 or 30 seconds, but video is fine.  The audio disappears with both programs.  Does anyone know what is happening with my audio capture?

    Update, I took the webcam home over the weekend and tried on my home network and the outcome was the same video fine - audio delayed, is this a Skype for desktop issue?

  • How do I record a video on my macBook Pro's webcam and upload it to YouTube?

    How do I record a video on my macBook Pro's webcam and upload it to YouTube?
    Many thanks.

    Your posted info shows you are using Mac OS X (10.5.8). With this Mac OS, you can use iMovie, Photo Booth, or optional QuickTime 7 Pro to record and save a QuickTime video.  (Be sure to save in a YouTube Supported file format.)
    Then follow the YouTube Help instructions for How to upload your saved videos.
    Message was edited by: EZ Jim
    Mac OSX 10.8.4

  • Microsoft NX-6000 Webcam and Arch Linux

    I picked up one of these off ebay cause they looked pretty nice.  I love the webcam, it has a great design.  But it's turning out to be kind of a PITA to get working right.  ATM, the only piece of software I can use this camera with is luvcview (yes, it looks to be a UVC camera).  It seems alright, but it is really ... hackjobby.  There's a significany video delay, it seems to not have audio recording support, and the video quality is pretty terrible.  I've seen videos on the internet of people posting with these webcams, and the quality of the video is much higher than what I've been able to obtain.  This makes me curious if this camera is enhanced with proprietary MS code when running in Windows (I sure hope not!).
    Regardless, I've been trying the camera with different pieces of software.  Cheese always pops up for just a split second, crashes, and verboses "Segmentation Fault" at the terminal.  Ekiga can't use the webcam either, but the light on the front of it flashes a couple times when I try to.  I installed the linux-uvc-svn driver, and uvcvideo is automatically probed when I plug the camera in (as well as snd_usb_audio).  I've heard of other people having success with this camera so I'm curious if I've missed anything!

    Hmmmm ... I've been trying other things and I get a really interesting message from fswebcam ...
    [max@pwn ~]$ fswebcam | xsel -i
    --- Opening /dev/video0...
    Trying source module v4l2...
    /dev/video0 opened.
    No input was specified, using the first.
    Adjusting resolution from 384x288 to 352x288.
    --- Capturing frame...
    gd-jpeg: JPEG library reports unrecoverable error: Not a JPEG file: starts with 0x02 0x8a
    Captured frame in 0.00 seconds.
    --- Processing captured image...
    There are unsaved changes to the image.
    Not a JPEG file?

  • Different types of tables and modes

    Hi Experts
    What is the specification of different tables in console and different modes in data manager.
    What is the major difference between them.
    Can we create a table of one type in console and can use the same table in another mode in data manager, say if I create a taxanomy table and can I use it as the hierarchy mode in the data manager.
    have fun..
    Hari

    Hi Hari,
    Differnt types of tables in Console are :
    Actually the Tables in Console are further categorized as :
    Main Table and Sub table which include:
    Flat Tables : It is a simple table consisting of record and fields ( rows and column) . In MDM Main table is always a flat table.
    Hierarchy Table : A hierarchy table organizes information in a hierarchy, where each record is related to a parent record (even if the only parent is the root) and may also be related to sibling records and/or child records.
    Taxonomy Table : A taxonomy is the classification scheme that defines the categories and subcategories that apply to a collection of records. Categorizing records enables you to isolate subsets of records for various organizing, searching, editing and publishing purposes.
    Qualified Table : A qualified table in MDM stores a set of lookup records,and also supports qualifiers, u201Csubfieldsu201D that apply not to the qualified table record by itself, but rather to each association of a qualified table record with a main table record. MDM supports multiple simultaneous qualified tables.
    Tables are also Categorized as Object Tables like :
    Images : For storing Images
    Sounds : For Sound File.
    Videos : For storing Video Files .
    Binary Objects : To store Binary Objects.
    Text Blocks : To store block of text.
    Copy Blocks : Stores block of text interpreted as a Copy.
    Text HTML`s : Stores block of text interpreted as a HTML.
    PDFs : To store PDF files.
    There are various types of Special Tables also:
    Image Variants : Used to define the structure
    and format of each of the variants for each image. Each variant is a modified version derived from an original image; the original image is never modified.
    Masks : In this defined subset of records are included in Mask i.e. in any scenario whether new records are added or deleted in the repository the records in the Mask remains the same unless edited by the user.
    Families : Used to further partition main table records in each category into smaller groups based upon the values of other fields and/or attributes.
    Relationships : Used to define each of the different record-level relationships. Each relationship can be either bidirectional (sibling) or unidirectional (parent-child).
    Workflows : Stores the workflows of an MDM repository, where each workflow is stored as a record in the table.
    Name Searches : Unlike Masks in case of Name search there are again a defined set of records but those records are selected on the basis of Search Selection. In this case if a record is added then the record is checked whether it fulfills the particular search criteria if it does than it is added to the Name serach else not.
    Data Groups : Stores the hierarchy of data groups used to break the entire set of objects in the MDM repository into manageable subgroups.
    There are various types of System Tables :
    Roles :  A single table named Roles. One of three tables used to implement MDM repository security and access control. Each role can selectively grant or deny access to any MDM function and to any table or field. This table is managed in the MDM Console and is not visible in the MDM Client.
    Users : A single table named Users. One of three tables used to implement MDM repository security and access control. Each user can have one or more roles. This table is managed in the MDM Console and is not visible in the MDM Client.
    Connections : A single table named Connections. One of three tables used to implement MDM repository security and access control. Contains an entry for each currently connected MDM client application, which can be terminated by the MDM Console user. This table is not visible in the MDM Client.
    Change Tracking : A single table named Change Tracking. Allows you to specify the fields for which adds, modifies, and deletes should be tracked and stored in the Change Tracking table.
    Remote Systems : A single table named Remote Systems. Used to define the different remote systems for import and export. Each specifies whether it supports inbound, outbound, or both. This table is managed in the MDM Console and is not visible in the MDM Client.
    Ports : A single table named Ports. Used to encapsulate the logistical and configuration info for inbound and outbound processing of MDM data, for consolidation and distribution respectively. This table is managed in the MDM Console and is not visible in the MDM Client.
    Links : A single table named Links. Used to specify the URLs that can be used as the target of an embedded browser in the Web tab in the MDM Client. This table is managed in the MDM Console and is not visible in the MDM Client.
    XML Schema : A single table named XML Schemas. Used to identify the XML schemas for import and syndication. Each XML schema is the name of an .xsd file. This table is managed in the MDM Console and is not visible in the MDM Client.
    Reports : A single table named Reports. Contains an entry for each report file generated by the various MDM repository operations, which can be accessed and viewed by the MDM Console user. This table is not visible in the MDM Client.
    Logs : A single table named Logs. Contains an entry for the log files generated by the MDM Server, which can be accessed and viewed by the MDM Console user. This table is not visible in the MDM Client.
    Data Manager:
    Data Manager in simple terms can be stated as a place where we manage the data that is taken from various systems.
    All the data that you take from all the various systems that a business is using is then taken into data manager, so that it could be cleansed and can be maintained easily in future.
    There are basically four different modes in Data Manager:
    1. Record Mode:  This mode allows us to search, view and edit the records of any table in MDM repository. This is the mode that one uses most often, primarily to view and edit records in the main table and also to view and edit records in any of the sub tables.
    2. Hierarchy mode. This mode allow us to view and edit the hierarchy tables in the MDM repository, including regular hierarchy tables, taxonomy tables, and the Masks table. Though we can also view and edit the records of a hierarchy table in Record mode, Hierarchy mode specifically allows us to edit the parent/child relationships and the sibling ordering of the hierarchy.
    3. Taxonomy mode. This mode allows us to view and edit the taxonomy tables in the MDM repository. We usually use this mode to create and maintain the category hierarchy used in the repository, and to manage the attributes associated with each category and subcategory. Though we can also view and edit taxonomy tables in both Record mode (for searching) and Hierarchy mode (for editing the other fields of information associated with each category), Taxonomy mode is unique in that instead of focusing on the records of the taxonomy table, it allows you to create and manage the pool of attributes associated with the taxonomy table, and to assign attributes to categories on a category-by-category basis.
    4. Matching mode.  This mode allows us to identify and eliminate duplicate records within an MDM repository. When you view the main table in Matching mode, MDM allows you to perform u201Cmatching-and-mergingu201D on and against any or all of its records, using various user-defined criteria (like creation of Rules and Strategies) to decide whether or not records are potential duplicates.
    5. Family mode. This mode allows us to view and edit the Families table, which layers a hierarchy of families upon the taxonomy hierarchy to further break down each category into smaller groups of main table records. We usually use this mode to partition the categories of the taxonomy hierarchy by the values of other fields and/or attributes, and then to associate family data (such as an image, a paragraph, and bullets) once with each family of main table records rather than each individual record.
    Can we create a table of one type in console and can use the same table in another mode in data manager, say if I create a taxanomy table and can I use it as the hierarchy mode in the data manager.
    The structure of the tables are defined in Console and those tables are then used in Data Manager, but if you have defined a table as a Hierarchy table you cannot use that table in Taxonomy Mode but you will be able to see all the tables in Record Mode.
    Hope this would be useful...
    If useful do reward points!!!!
    Regards,
    Parul

  • Different scenario to run Former XML Publisher report

    Hi All.
    I have some different kind of scenario to run the XML Publisher report. Please look into the following scenario and requirements:
    In my current project we are implementing 22 languages like Chinese, Japanese, Spanish etc. Out of these 22 languages, 8 languages will be installed and 14 will be uninstalled. We are defining the language on 2 places: OU level and Address level. For those reports that need to be translated, we are using XML Publisher to achieve this, but we have different scenario to pass the language, in order to select the corresponding template.
    Scenario: As i mentioned we are defining the languages on address level, it is considered that the language defined at the address level will be customer's preferred language and he would like to see the output in that language only. there are 2 possible conditions while running the report: 1. User may select the language in which he want the report to be displayed in. 2. User may not select any language. The 1st scenario can be fulfilled by standard functionality. but in case of second scenario when user does not select any language then we need to display the report in language defined on address level for that customer. For Ex: if the Invoice report is running for 4 invoices and have 2 different customers and their preferred language is different, suppose for 1 customer it is Chinese and for another one it is Japanese. Then we need to display the output in customer's preferred language only i.e for Japanese customer it should be in Japanese and for Chinese customer it should be in Chinese i.e 2 different templates will be applicable.
    So as per this while submitting the concurrent request we need to check whether user has selected the language or not? And after making all the conditions check we will have to submit the xml publisher report using API. Do you have any suggestion how can we achieve this task?
    Please suggest.
    Thanks,
    AS

    Hi AS,
    How about using a conc prog parameter for User selected language, and XML element data at customer level, then call a subtemplate (or multiple embedded regions in the same template) in the required language based on if or case logic in the template.
    Regards,
    Gareth

  • How can i set different number of iterations for different scenario profiles that we add to "AutoPilot" in load testing of OATS

    Hi,
    I have few set of load test scenarios, I would like to add each of these test scenarios to "AutoPilot" and run each different scenario profile at different number of iterations.
    As in Oracle Load Testing the "Set Up AutoPilot" tab I see  a section like this "Iterations played by each user: ", which says run these many iterations for every virtual user of all profile added under "Submitted Profile Scenario". So is there any thing like that to set different iterations for every scenario profile added in Autopilot.
    Thanks in advance

    It's not a built-in feature to override a page's styles on a tab-by-tab or site-by-site basis, but perhaps someone has created an add-on for this?
    It also is possible to create style rules for particular sites and to apply them using either a userContent.css file or the Stylish extension. The Greasemonkey extension allows you to use JavaScript on a site-by-site basis, which provides further opportunity for customization. But these would take time and lots of testing to develop and perfect (and perfection might not be possible)...
    Regarding size, does the zoom feature help solve that part? In case you aren't familiar with the keyboard and mouse shortcuts for quickly changing the zoom level on a page, this article might be useful: [[Font size and zoom - increase the size of web pages]].

  • I bought a team license for two computers, the purchase was recorded on the credit card and the amount recorded in the making, but was unable to validate the association staff . I received an email stating that Adobe could not release the payment and that

    I bought a team license for two computers, the purchase was recorded on the credit card and the amount recorded in the making, but was unable to validate the association staff .
    I received an email stating that Adobe could not release the payment and that I should validate the method of payment , tried to insert another card number but the system does not accept the security VAT reporting error message. How do I validate my license with association staff and confirm the payment card?

    Hi Daniel,
    For any sort of payment related matter, kindly contact our support team via:  http://helpx.adobe.com/in/contact.html?step=CCSN_adobe-id-signing-in_stillNeedHelp
    If you are unable to use chat option kindly try below mentioned steps.
    Try different browser.
    Delete cookies and cache
    If you are still not able to chat, Kindly reply with the below mentioned information.
    OS version:
    Browser Version:
    You can also try: http://helpx.adobe.com/x-productkb/global/phone-support-orders.html 
    Thanks,
    Atul Saini

  • How do I record a numeric output values and then use them?

    So at the moment I just have a numeric value being display with a numeric indicator. I want to record this value somewhere for later use. Such as doing calculations. I want to store many numeric values that are outputed to this single indicator at different times and then pull them from the stored place and use them. I don't know much about arrays and storage stuctures in labview.  Can someone give me some directions please? Thanks

    So there isn't really anything related to the question yet in may code.
    My code shows movement control for a motor.
    I have a forwards button which increments +1 for every iteration of the loop. Each loop sends a pulse to the motor to move it.
    I have a backwards button which increments -1 for every iteration of the loop. In this loop i have just placed the direction pulse which tells the motor to turn the oposite way.
    these increments add onto a counter which is shown as the numerical indicator, used to show the position of the motor.
    I also have a reset button on this motor. To change the position to zero.
    So now what i want is to put the value of the position of the motor into an array which will then stay at that value in the array even when the position moves again. So i can record different positions.
    I then want to use these values. so i want to know how to get them from the array to the Number of iterations for a For loop so i can move the motor by that amount.
    Your help is appriciated, ive already spent so much time getting to this stage.
    Attachments:
    Xaxisbutton.vi ‏15 KB

  • Need pdf file links for different scenarios

    Hi folks,
    I am new to PI.Please can any body provide me pdf file links for different scenarios like   File to File, File to JDBC,JDBC to File,File to RFC, RFC to File, File to IDOC, IDOC to File, Http to RFC, Web services to RFC, File to Mail,ABAP to ABAP proxy and  Java Proxies to JDBC.
    Thanks in advance.
    SAP XI/PI Moderator ****************
    Very Simple. Search SDN.
    Thread Locked.
    SAP XI/PI Moderator ****************
    Edited by: Aashish Sinha on Feb 21, 2012 1:36 PM

    hi chandra, do you have the pdf file for fi-ca configuration

  • Why is the Nike   apps different on the iTouch and iPod nano

    Can someone explain why Apple put different apps on iTouch and iPod nano and call it only Nike +. There are obvious difference in the apps. I want the app that stores heart information...but the Nike + app on the iTouch only records distance ran. Why not make one app that does both?
    what is the deal and can I load the Nike + app that comes on the nano on my iTouch 4gen? 
    Will the Nike + app for the iTouch be upgrade to work with the Polar heart band and Nike + Gym?

    Yes and Yes.
    When I navigate to Notification Center in Settings from an iPhone 4:
    Notifications view - on
    Today view - on
    Today summary - on
    Calendar day view - off
    Reminders - on
    Stocks - off
    Tomorrow summary - off
    Sort by Time
    The only apps I don't include are third party and have nothing to do with weather.
    Usually when I swipe down on the Today view it's only giving me the date.
    Thanks for taking the time to help me!

  • I want to connect a logitech webcam and make it my default cam

    i want to connect a logitech webcam and make it my default cam

    Hello
    Page 91 of the English PDF User's Guide we may read:
    +• To paste a copy of a formula in a different cell and use the same cell references in both+
    +formulas, place a dollar sign ($) in front of column and row identifiers (=$A$1). This+
    +technique creates what’s called an absolute cell reference.+
    +For example, if the formula =A1 appears in cell D1 and you want to paste a copy of the+
    +formula in cell E1, change the formula to =$A$1, select D1, copy it, and paste the copy+
    +into E1. The formula $A$1 is copied into cell E1. If you didn’t change the formula to use+
    +an absolute cell reference the formula in E1 would be =B1.+
    This is a very old scheme and the User's guide is not complete
    We may use two other kind of cells reference:
    =$A1
    the column would be fixed but the row num would adjust
    =A$1
    the row num would be fixed but the column would adjust
    Yvan KOENIG (from FRANCE mardi 15 janvier 2008 08:52:47)

  • I have a HP610-1150f. not recording sound when using webcam in touchsmart screen.

    I have a HP610-1150f. not recording sound when using webcam in touchsmart screen.  I have looked thru this forum and I don't see anyone else having this problem. (unless I missed it).  The recording works in Notes, but not when I open Webcam and try to record from there. video recording works fine. I have had this computer less than a month and I am having a couple of problems with it. Still loving it though.

    Hello schae731: Welcom to HP Forum and your new Touchsmart. You need to contact HP Direct Support on line your Touchsmart comes  with one year warranty so use it why you can. You can contact them through your HP Support Assistant or on line. They will help you with trouble shoot the web-cam software. Goto your computers model and make support web-site. They will also help you with your other issues as well.
             I am using the older version software so I won't be much help. Please repost if HP direct support is un able to help you resolve your issues. While you are chatting with them have them check out your computer do it before your 1 year warranty expires. Have fun with your new computer.

  • Requisition has different doc. type NB and item cat

    hi all,
    i got one PR from project system account assignment category N  item category standard
    but i am converting that pr to subcontracting PO  i am getting following error" _Requisition has different doc. type NB and item cat"_

    Hi, I came across an alternative solution to do subcontracting with project stock. From the online documentation:
    Subcontracting for Sales Order Stock and Project Stock
    Purpose
    Subcontracting is also possible in conjunction with sales order stocks and project stocks. The subcontracting orders are account-assigned to a sales order or a WBS element. Thus, the components are not transferred (using a transfer posting) to the "stock of material provided to vendor" but are directly withdrawn from the sales order stock or the project stock at the time of the goods receipt. The material manufactured is also posted to the sales order stock or to the project stock. The cost of subcontracting is then debited to the sales order or WBS element.
    Since the components are not transferred to the "stock of material provided to vendor", we recommend that you use a transfer posting to transfer the provided components to a new storage location (for example, 9999). This enables you to obtain an overview of those stocks that are physically located at the subcontractor. This information is particularly important when you carry out a physical inventory of the sales order stocks and project stocks.
    Features
    Withdrawal from Stock of Mat. Provided or Sales Order/Project Stock
    For components that are managed in sales order stock or project stock, you can define whether the components are to be withdrawn directly from each sales order/project stock or from the stock of material provided to vendor. You manage this via the dependent requirements indicator for individual customer requirements and collective requirements (MARC-SBDKZ).
    You can maintain this indicator in the following places:
    in the MRP view of the material master record (MRP 4)
    in the explosion types for the BOM item (in Customizing for Production in the step Basic Data -> Bill of Material -> Item Data -> Define explosion types)
    Configuring the explosion types has priority over the configuration in Inventory Management.
    If the indicator is set at Collective requirements only (2), the materials are withdrawn from the stock of material provided to vendor. If this indicator is set any other way, the system withdraws materials from sales order stock or project stock
    Regards,
    Mario

  • Java API for webcams and Electrical Engineering

    Hi,
    Does anyone know of and API's that allow access to:
    - Webcams, so that you are able to monitor a webcam and access the images etc etc
    - Electronic circuit boards, e.g. monitor hardware, such as a processing plant whereby you can monitor output, input etc
    Basically a java interface to hardware, i looked at the javacomm api, but this only allows basic functionality as far as i am aware.
    Essentially, i need to monitor production faciltiies interfacing to a java environment so that hardware can be controlled and monitored.
    Any suggestions people ?
    Thanks
    K

    The Java Twain API from http://www.gnome.sk is designed to connect to a camera (or scanner) directly from the java application. You can comunicate with the camera, snap images, save them, ...
    If you just want to see how Java Twain works:
    - java (1.2 or higher) has to be installed on your computer
    - a scanner or camera has to be installed on your computer
    - download the trial package from http://www.gnome.sk
    - unzipp it
    - go to the examples directory of the unzipped package
    - doubleclick the runExampleShow.bat (for Windows) or runExampleShow.sh (for MacOS) file
    This will pop up the Twain Source Selection user interface. There, all your scanners and cameras which do have a twain driver should be listed. Select one of them. The user interface of the selected scanner (camera) will appear. Confirm the scanning (you can set the scanning parameters first). The scanned image will be displayed in a separate window. To end the application, close that window.
    Running different examples, you can test scanning with hidden UI, saving the scanned image, using ADF, ...
    If there are any problems, inquire at the technical support [email protected], I am a member :)
    Erika

Maybe you are looking for