Recordings on DVR Expander not displaying

I have 2 FIOS DVR expanders that are connected to my FIOS DVR. The DVR model number QIP 7232 2. The expanders are the approved ones form Western Digital. I connect one of the DVR expanders at a time through the eSATA cable, and I disconnect and connect them using the DVR menus, so I just don't pull out cables without using the menu.
The last time I re-connected my DVR expander #1 the names of the shows are not coming up in the menu even though the main DVR knows there is an expander connected. DVR #2 works just fine. I have checked all cables, rebooted the main DVR, and reinstalled both expanders many times. #1 continues to not display the shows, #2 is just fine.
Short of re-formatting #1, would anyone have a solution?
Thanks!

This issue actually has nothing to do with the 1.9a update to the guide interface.
I have had the F1 event trio set up for a long time now (and had 1.9 since last year as a beta tester) and they also did not schedule. The culprit is Verizon's crappy guide data provider. None of this past weekend's F1 live events (for the Indian Grand Prix) on Speed were marked as NEW so the series manager ignored them (I have it set for new, any time, and selected channel so I don't pick up the re-broadcasts).
I don't know when Verizon is gloing to learn that a DVR is worthless if the guide data is wrong - this guide data issue is a persistent one that Verizon seems unwilling to correct.
If a forum member gives an answer you like, give them the Kudos they deserve. If a member gives you the answer to your question, mark the answer as Accepted Solution so others can see the solution to the problem.

Similar Messages

Range expander not displayed in network device list from Router

My range expander seems to be working properly, blue lights, and improved signal in dead zone. However, I noticed when viewing my network devices from the router settings it did not list anything located at 192.168.1.240. I was wondering why that would be when the expander is working properly? Shouldn't the router show it as a connected device?
Thanks.
Solved!
Go to Solution.

I wouldn't worry about it. Mine doesn't either. I assume because it is set up like the router as a repeater that it is kinda like a "ghost". I know it is there because I can ping it and access it at 192.168.1.240 in the browser. If you want, you can download the LELA network management software. That will pick it up.
Message Edited by Luckydog on 01-30-2009 05:53 AM

Multiroom DVR does not work as expected.

Short description of my problem:
I can't use the multiroom DVR with the SD receiver I was sent nor another DVR. This leaves me only one option, an HD receiver which costs me more per month but does not give me any other added benefits.
Long description:
I recently ordered FIOS TV. I was drawn in by the multiroom DVR. I was a DirecTV customer for over 7 years and never had a problem with them (never lost signal in a storm either...). I got an ad that said I could get a free multiroom DVR, which is $19 a month, free for life. With my DirecTV setup, I had a DVR connected to both TVs in my house. I thought it might be nice to watch a recorded show at either one instead of having to watch it on the DVR it was recorded on.
After a frustrating experience with tech support, I finally had my multiroom DVR and standard set top box activated. I recorded something on the DVR and went upstairs to try and watch it. To my surprise, I found out that I could not. I had recorded it in HD and the receiver that had been supplied to me was an SD receiver. At this point I found it stupid that if I wanted to be able to watch a show at both locations, I either had to record it in SD, which looks like crap on an HDTV, or record it in both HD and SD which would use up both of my recording channels for one show. I know that I can upgrade to a HD receiver and watch it on both sets, but if I am going to pay more (just to make something work that was supposed to work for "free"), I might as well pay a little bit extra and get another DVR. I really liked being able to pause and rewind live TV at both locations.
I called sales to place an order for another DVR. Surprise again, a multiroom DVR will not stream to another DVR. So my only option is to have an HD receiver if I want to be able to use the multiroom DVR and not lose functionality. As a result, I have lost 2 channels of recording because I have one less DVR than I used to, and I can no longer pause live TV at one of my TVs. I don't think that is worth the $10 ($19 - $8 for an HD receiver) a month.
Solved!
Go to Solution.

kiseraut wrote:
Justin,
Thank you for the reply. I am in western PA but can't check my DVR for the version until I get home.
Can you please elaborate what you mean by "and as an aside, if you have QIP6416 DVRs and/or the QIP2500 SD STB, you will not be happy with 1.9 on any of those boxes." I'm not sure what kind of receivers I have off hand.
If I can get two DVRs to work with each other I would be ecstatic!!! Thanks again for the info.
You obviously have internet access, you can't use the internet to view what STBs you have in your account? If you do that, it will show you the model numbers of each of your STBs.
But anyway, the 6xxx boxes are the old original STBs that Verizon delivered for FiOS TV starting 6 years ago. They worked fine with all levels of the IMG up through 1.8 (I had one for 5 1/2 years, got rid of it earlier this year, replaced it with a 7232). With the new 1.9 level, the 6xxx and 2500 boxes perform very poorly, they just do not have the processor, graphics processor, memory (and for the 6xxx boxes, an eSATA port) to support the new HD graphics and things like an external hard drive. So your Guide will still be SD, it will be somewhat hard to read, the boxes will be slow, slow, slow, etc.
As I said, two DVRs most certainly can work together with 1.9. That feature is called Multi-Hub, it is free, just needs to be turned on on the DVRs. Allows you to access, schedule, and delete recordings on either DVR from other STBs as well as the DVRs themselves.
A simple way to tell if you already have 1.9 is to look at the Guide and if it has the light blue/gray background it is 1.9.
If you still have the two DVRs but not yet 1.9, I suggest you just keep them (unless they are 6xxx boxes), the new support should be available to you soon.
Edit: Just had a thought, I know Verizon also uses Cisco STBs in some areas. I have no idea whether they do where you are, but it is possible that that is what you have. If so, I think they have an older version of 1.9 that does not yet support some of the features that the 1.9 for Motorola boxes has. Not sure which features.....
Justin
FiOS TV, Internet, and phone user
QIP7232, QIP7100-P2, IMG 1.9A
Keller, TX 76248

Dreamweaver tables not displaying correctly in internet explorer browser, please help!!!!

Could someone please help me with this issue i've been having for almost a year now and can't find any information on getting this fixed, for some reason the features specs and required tables rows are not displaying correctly, the image is out of aligned when viewing the results using the internet explorer browser only, the firefox browser works just as needed but when i try to view the same code in IE the tables are not aligned properly and the text is not margined correctly either, i tried playing around with the css style that i have and no results. Please help me fix this issue so that my page would display in internet explorer just like under Firefox. Below are the pictures of the problem i'm having.
This picture shows how i want it displayed on the internet explorer and firefox browser:
Here is results in firefox browser:
Here is results in internet explorer browser:
As you can see the tables are all messed up, text is not centered properly even if i coded it right.
Here is the coding for this page:
PLEASE HELP ME OUT WITH THIS PROBLEM, I NEED TO FIGURE OUT HOW TO MAKE INTERNET EXPLORER TO DISPLAY THE INFORMATION CORRECTLY JUST LIKE FIREFOX?
<style type="text/css">

</style>
<body>
<table width="935" border="0">
<tr>
<td><img src="http://www.ehobbyplanet.com/eBay/Layout/eHobbyShortHeader.jpg" width="928" height="165" /></td>
</tr>
<tr>
<td height="44" align="center" valign="middle" class="title">HPI 1/5 Baja 5T Gas Truck RTR<td></td>
</tr>
<tr>
<td height="31" align="center" valign="middle" class="number">HPI Item #10620<td width="10"></td>
</tr>
</table>
<table width="925" height="326" border="0">
<tr>
<td width="16"> </td>
<td width="549"><img src="http://www.ehobbyplanet.com/Items/RC/HPI/10620/Image-1md.jpg" width="549" height="429" id="mainPic"/></td>
<td width="35"> </td>
<td width="1559"><p><img src="http://www.ehobbyplanet.com/Items/RC/HPI/10620/Image-1sm.jpg" width="116" height="85" onClick="changePic('Image-1')"/> <img src="http://www.ehobbyplanet.com/Items/RC/HPI/10620/Image-2sm.jpg" width="116" height="85" onClick="changePic('Image-2')"/></p>
<p><img src="http://www.ehobbyplanet.com/Items/RC/HPI/10620/Image-3sm.jpg" width="116" height="85" onClick="changePic('Image-3')"/> <img src="http://www.ehobbyplanet.com/Items/RC/HPI/10620/Image-4sm.jpg" width="116" height="85" onClick="changePic('Image-4')"/></p>
<p><img src="http://www.ehobbyplanet.com/Items/RC/HPI/10620/Image-5sm.jpg" width="116" height="85" onClick="changePic('Image-5')"/> <img src="http://www.ehobbyplanet.com/Items/RC/HPI/10620/Image-6sm.jpg" width="116" height="85" onClick="changePic('Image-6')"/></p>
<p><img src="http://www.ehobbyplanet.com/Items/RC/HPI/10620/Image-7sm.jpg" width="116" height="85" onClick="changePic('Image-7')"/> <img src="http://www.ehobbyplanet.com/Items/RC/HPI/10620/Image-8sm.jpg" width="116" height="85" onClick="changePic('Image-8')"/></p>
<p class="text">Click to enlarge picture</p></td>
</tr>
</table>
<table width="928" height="124" border="0">
<tr>
<td height="320" class="description"><p>HPI Racing is proud to present the Baja 5T, a <strong>ready-to-run</strong> (RTR) 1/5th scale off-road truck that expands on the award-winning Baja 5B family. With the Baja 5T you get aggressive desert truck looks, high performance new features, and compatibility with many of the existing Baja 5B spare parts and option parts, wrapped up in a RTR package that gets you running in just a few minutes.</p>
<p>Includes: HPI Baja 5T RTR Truck with 1.6 cu in gasoline engine, 27MHz FM Radio, two water resistant servos, 3.4oz (100cc) 2-cycle oil, 2oz (60cc) shock oil, 1oz (30cc) diff oil, 1oz (30cc) air filter oil, tube of gear grease, 3000mAh receiver pack, wall charger, body with wing, extra air filter, wrenches, decal sheet and illustrated instruction manual.</p></td>
</tr>
</table>
<table width="928" border="0">
<tr>
<td width="290"> </td>
<td width="17"> </td>
<td width="292"> </td>
<td width="17"> </td>
<td width="290"> </td>
</tr>
<tr>
<td align="center" class="features">Features:</td>
<td align="center"> </td>
<td align="center"><span class="features">Specifications:</span></td>
<td align="center"> </td>
<td align="center"><span class="features">Required:</span></td>
</tr>
<tr>
<td height="526" class="featurebackground"><ul>
<li>Ventilated Disc Brake System</li>
<li>Heavy Duty Rear Dogbones</li>
<li>Moulded Nylon Rear Spoiler</li>
<li>Aluminum Alloy Diff Case</li>
<li>Dirt Guards</li>
<li>Full Metal Ball Bearings</li>
<li>Front & Rear Sway Bars</li>
<li>Modified Rear Shock Tower</li>
<li>Heavy Duty Inner Foam</li>
<li>Revised Gearing</li>
<li>High Flow Muffler</li>
<li>SFL-10MG2 Metal Gear Steering Servo</li>
<li>Heavy Duty Beadlocks</li>
<li>8000 RPM Clutch</li>
<li>Anodized Aluminum Parts</li>
<li>Double Wishbone Suspension</li>
<li>Adjustable Suspension</li>
<li>Baja 5T-1 Truck Body</li>
<li>Extended Roll Cage</li>
<li>Outlaw Truck Wheels / Desert Buster Tires</li>
<li>Fuelie 26 Engine (26cc)</li>
<li>All Metal Transmission Gears</li>
<li>High Quality Radio Gear</li>
</ul>
<td> </td>
<td class="featurebackground"><ul>
<li>Drive System: 2WD viscous Diff</li>
<li>Tires (front & rear): Truck Wheels / Desert Buster</li>
</ul>
<p> </p>
<p> </p>
<p> </p>
<p> </p>
<p> </p>
<p> </p>
<p> </p>
<p> </p>
<p> </p>
<p> </p>
<p> </p></td>
<td> </td>
<td class="featurebackground">
<ul>
<li class="featurebackground">Unleaded Gasoline: 87-93 octane, mix gasoline with two cycle oil at 25:1 ratio</li>
<li class="featurebackground">Transmitter Batteries: 8x AA</li>
<li class="featurebackground">Screwdriver: Flat blade, 3/16" (4-5mm) wide</li>
</ul>
<p> </p>
<p> </p>
<p> </p>
<p> </p>
<p> </p>
<p> </p>
<p> </p>
<p> </p>
<p> </p>
<p> </p></td>
</tr>
</table>
<table width="928" height="621" border="0">
<tr>
<td> </td>
</tr>
<tr>
<td height="135" background="http://www.ehobbyplanet.com/eBay/Layout/ePaymentMethod.jpg" class="policy"><p>We accept Visa, Mastercard and Discover Card and PayPal. If your unable to send payment using these methods please contact us at [email protected]. All payments need to be sent within 5 days.
</p>
<p> </p></td>
</tr>
<tr>
<td height="21"> </td>
</tr>
<tr>
<td height="220" background="http://www.ehobbyplanet.com/eBay/Layout/eNormalShipping.jpg" class="policy"><p>All our orders are shipped out within 72 business hours unless stated. We ship everything out using the best packaging material to insure safe deliveries using shipping companies such as USPS Postal Office and UPS services (Shipping times will vary depending on the service you choose). Tracking information will be automatically sent via email after an order has been shipped out. We Definitely Combine Shipping for multiple items, if for some reason our eBay checkout isn’t combining your items please wait for a custom eBay invoice which will have your order combined into one, reducing the shipping price. For international customers, please note: "that Import duties, taxes, and charges are not included in the item price or shipping charges. These charges are the buyer's responsibility. Check with your country's customs office to find out what these additional costs will be before you bid or buy".</p>
<p>Please Note for International Customers Only: Due to the large size of this item there are several countries that have a size limitation which we are not able to ship to, if by any means your order goes through to us and it falls in the country size restrictions and your order cannot be shipped out we have the right to cancel your order (before cancelling the order we will contact the customer via email).</p></td>
</tr>
<tr>
<td> </td>
</tr>
<tr>
<td height="104" background="http://www.ehobbyplanet.com/eBay/Layout/eInsurance.jpg" class="policy">We offer insurance which is optional during checkout for both Domestic and International customers which will cover the full amount paid by customer, if insurance isn't purchased we are not responsible for packages that are missing during transit. If you use the USPS First Class Mail International shipping service please allow 10 - 25 business days for the delivery of your package.</td>
</tr>
<tr>
<td height="21"> </td>
</tr>
<tr>
<td height="135" background="http://www.ehobbyplanet.com/eBay/Layout/eReturns.jpg" class="policy">We want you to be completely happy with your purchases. So we do everything we can to assure you get the exact merchandise you order, delivered on time. If by any means your unsatisfied with your purchase we will be happy to accept returns for an exchange or a refund within 14 days. If shipping the item back, customer is responsible for freight charges to us. We offer refunds & exchanges if your not satisfied with your purchase. The returned product needs to be in the same condition it was shipped out in, unused and in it’s original packaging. If by any chance there has been an issue with your order and you want to request a return please email us at [email protected].</td>
</tr>
</table>
</body>
<script type="text/javascript">
if(document.images) {
tempImage = new Image();
tempImage.src = "http://www.ehobbyplanet.com/Items/RC/HPI/10620/Image-1md.jpg";
tempImage.src = "http://www.ehobbyplanet.com/Items/RC/HPI/10620/Image-2md.jpg";
tempImage.src = "http://www.ehobbyplanet.com/Items/RC/HPI/10620/Image-3md.jpg";
tempImage.src = "http://www.ehobbyplanet.com/Items/RC/HPI/10620/Image-4md.jpg";
tempImage.src = "http://www.ehobbyplanet.com/Items/RC/HPI/10620/Image-5md.jpg";
tempImage.src = "http://www.ehobbyplanet.com/Items/RC/HPI/10620/Image-6md.jpg";
tempImage.src = "http://www.ehobbyplanet.com/Items/RC/HPI/10620/Image-7md.jpg";
tempImage.src = "http://www.ehobbyplanet.com/Items/RC/HPI/10620/Image-8md.jpg";
function changePic(newName) {
newPicURL = "http://www.ehobbyplanet.com/Items/RC/HPI/10620/"+newName+"md.jpg";
mainPic.src = newPicURL;
</script>
Here is my contact information:
Paul
[email protected]

Try this without the border images and it will work in all browsers with increased text size. That's assuming eBay supports embedded CSS styles (which I'm not convinced they do). Inline styles are safer IMHO.
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="http://www.w3.org/1999/xhtml">
<head>
<meta http-equiv="Content-Type" content="text/html; charset=utf-8" />
<title>Untitled Document</title>
<style type="text/css">
.title {
background-image: url(http://www.ehobbyplanet.com/eBay/Layout/Title.jpg);
background-position: center center;
font-size: 24px;
font-weight: bold;
color: #FFF;
font-family: Tahoma, Verdana, Arial, Helvetica, sans-serif;
vertical-align: middle;
h2 {font-size:1.7em; color:#000; margin-top:0em; margin-bottom: 2px;}
ul,li {
font-size:14px;
list-style:disc;
line-height:1.5;
font-family: "Times New Roman", Times, serif;
.description {
font-family: "Times New Roman";
font-size: 16px;
line-height: 1.2;
font-weight: bold;
color: #000;
text-align: left;
vertical-align: middle;
border: 4px solid red;
padding: 0 20px 20px 20px;
.text {
font-family: "Lucida Sans Unicode", "Lucida Grande", sans-serif;
font-size: 14px;
font-weight: bold;
color: #F00;
text-indent: 2em;
.features {
font-family: Georgia, "Times New Roman", Times, serif;
font-size: 18px;
font-style: italic;
font-weight: bolder;
text-decoration: underline;
color: #666666;
line-height: 3em;
.featurebackground {
padding-right: 10px;
border: 4px solid red;
width: 200px;
vertical-align: top;
padding-top: 1em;
.policy {
border: 4px solid red;
margin-top: -2em;
.fsr_style { font-family: Arial, Helvetica, sans-serif;
font-size: 12px;
color: #000000;
background-color: #FFFFFF;
padding-top: 5em;
padding-right: 20px;
border: 4px solid red;
.number {
.policy {
font-family: "Times New Roman", Times, serif;
font-weight: normal;
font-size: 14px;
padding: 0 20px 20px 20px;
</style>
</head>
<body>
<table width="935" border="0">
<tr>
<td><img src="http://www.ehobbyplanet.com/eBay/Layout/eHobbyShortHeader.jpg" width="928" height="165" /></td>
</tr>
<tr>
<td height="44" align="center" valign="middle" class="title">HPI 1/5 Baja 5T Gas Truck RTR</td><td></td>
</tr>
<tr>
<td align="center" valign="middle" class="number">HPI Item #10620</td><td width="10"></td>
</tr>
</table>
<table width="925" border="0">
<tr>
<td width="16"> </td>
<td width="549"><img src="http://www.ehobbyplanet.com/Items/RC/HPI/10620/Image-1md.jpg" width="549" height="429" id="mainPic"/></td>
<td width="35"> </td>
<td width="1559"><p><img src="http://www.ehobbyplanet.com/Items/RC/HPI/10620/Image-1sm.jpg" width="116" height="85" onclick="changePic('Image-1')"/> <img src="http://www.ehobbyplanet.com/Items/RC/HPI/10620/Image-2sm.jpg" width="116" height="85" onclick="changePic('Image-2')"/></p>
<p><img src="http://www.ehobbyplanet.com/Items/RC/HPI/10620/Image-3sm.jpg" width="116" height="85" onclick="changePic('Image-3')"/> <img src="http://www.ehobbyplanet.com/Items/RC/HPI/10620/Image-4sm.jpg" width="116" height="85" onclick="changePic('Image-4')"/></p>
<p><img src="http://www.ehobbyplanet.com/Items/RC/HPI/10620/Image-5sm.jpg" width="116" height="85" onclick="changePic('Image-5')"/> <img src="http://www.ehobbyplanet.com/Items/RC/HPI/10620/Image-6sm.jpg" width="116" height="85" onclick="changePic('Image-6')"/></p>
<p><img src="http://www.ehobbyplanet.com/Items/RC/HPI/10620/Image-7sm.jpg" width="116" height="85" onclick="changePic('Image-7')"/> <img src="http://www.ehobbyplanet.com/Items/RC/HPI/10620/Image-8sm.jpg" width="116" height="85" onclick="changePic('Image-8')"/></p>
<p class="text">Click to enlarge picture</p></td>
</tr>
</table>
<table width="928" border="0">
<tr>
<td class="description"><h2>Description</h2>
<p>HPI Racing is proud to present the Baja 5T, a <strong>ready-to-run</strong> (RTR) 1/5th scale off-road truck that expands on the award-winning Baja 5B family. With the Baja 5T you get aggressive desert truck looks, high performance new features, and compatibility with many of the existing Baja 5B spare parts and option parts, wrapped up in a RTR package that gets you running in just a few minutes.</p>
<p>Includes: HPI Baja 5T RTR Truck with 1.6 cu in gasoline engine, 27MHz FM Radio, two water resistant servos, 3.4oz (100cc) 2-cycle oil, 2oz (60cc) shock oil, 1oz (30cc) diff oil, 1oz (30cc) air filter oil, tube of gear grease, 3000mAh receiver pack, wall charger, body with wing, extra air filter, wrenches, decal sheet and illustrated instruction manual.</p></td>
</tr>
</table>
<table width="928" border="0">
<tr>
<td width="290"> </td>
<td width="17"> </td>
<td width="292"> </td>
<td width="17"> </td>
<td width="290"> </td>
</tr>
<tr>
<td align="center"><span class="features">Features:</span></td>
<td align="center"> </td>
<td align="center"><span class="features">Specifications:</span></td>
<td align="center"> </td>
<td align="center"><span class="features">Required:</span></td>
</tr>
<tr>
<td class="featurebackground"><ul>
<li>Ventilated Disc Brake System</li>
<li>Heavy Duty Rear Dogbones</li>
<li>Moulded Nylon Rear Spoiler</li>
<li>Aluminum Alloy Diff Case</li>
<li>Dirt Guards</li>
<li>Full Metal Ball Bearings</li>
<li>Front & Rear Sway Bars</li>
<li>Modified Rear Shock Tower</li>
<li>Heavy Duty Inner Foam</li>
<li>Revised Gearing</li>
<li>High Flow Muffler</li>
<li>SFL-10MG2 Metal Gear Steering Servo</li>
<li>Heavy Duty Beadlocks</li>
<li>8000 RPM Clutch</li>
<li>Anodized Aluminum Parts</li>
<li>Double Wishbone Suspension</li>
<li>Adjustable Suspension</li>
<li>Baja 5T-1 Truck Body</li>
<li>Extended Roll Cage</li>
<li>Outlaw Truck Wheels / Desert Buster Tires</li>
<li>Fuelie 26 Engine (26cc)</li>
<li>All Metal Transmission Gears</li>
<li>High Quality Radio Gear</li>
</ul>
</td>
<td> </td>
<td class="featurebackground"><ul>
<li>Drive System: 2WD viscous Diff</li>
<li>Tires (front & rear): Truck Wheels / Desert Buster</li>
</ul>
</td>
<td> </td>
<td class="featurebackground">
<ul>
<li>Unleaded Gasoline: 87-93 octane, mix gasoline with two cycle oil at 25:1 ratio</li>
<li>Transmitter Batteries: 8x AA</li>
<li>Screwdriver: Flat blade, 3/16" (4-5mm) wide</li>
</ul>
</td>
</tr>
</table>
<table width="928" border="0">
<tr>
<td> </td>
</tr>
<tr>
<td class="policy"><h2>Payment Method </h2>
<p>We accept Visa, Mastercard and Discover Card and PayPal. If your unable to send payment using these methods please contact us at [email protected]. All payments need to be sent within 5 days.
</p></td>
</tr>
<tr>
<td> </td>
</tr>
<tr>
<td class="policy"><h2>Shipping & Handling </h2>
<p>All our orders are shipped out within 72 business hours unless stated. We ship everything out using the best packaging material to insure safe deliveries using shipping companies such as USPS Postal Office and UPS services (Shipping times will vary depending on the service you choose). Tracking information will be automatically sent via email after an order has been shipped out. We Definitely Combine Shipping for multiple items, if for some reason our eBay checkout isn’t combining your items please wait for a custom eBay invoice which will have your order combined into one, reducing the shipping price. For international customers, please note: "that Import duties, taxes, and charges are not included in the item price or shipping charges. These charges are the buyer's responsibility. Check with your country's customs office to find out what these additional costs will be before you bid or buy".</p>
<p>Please Note for International Customers Only: Due to the large size of this item there are several countries that have a size limitation which we are not able to ship to, if by any means your order goes through to us and it falls in the country size restrictions and your order cannot be shipped out we have the right to cancel your order (before cancelling the order we will contact the customer via email).</p></td>
</tr>
<tr>
<td> </td>
</tr>
<tr>
<td class="policy"><h2>Insurance</h2>
<p>We offer insurance which is optional during checkout for both Domestic and International customers which will cover the full amount paid by customer, if insurance isn't purchased we are not responsible for packages that are missing during transit. If you use the USPS First Class Mail International shipping service please allow 10 - 25 business days for the delivery of your package.</p></td>
</tr>
<tr>
<td> </td>
</tr>
<tr>
<td class="policy"><h2>Returns</h2>
<p>We want you to be completely happy with your purchases. So we do everything we can to assure you get the exact merchandise you order, delivered on time. If by any means your unsatisfied with your purchase we will be happy to accept returns for an exchange or a refund within 14 days. If shipping the item back, customer is responsible for freight charges to us. We offer refunds & exchanges if your not satisfied with your purchase. The returned product needs to be in the same condition it was shipped out in, unused and in it’s original packaging. If by any chance there has been an issue with your order and you want to request a return please email us at [email protected].</p></td>
</tr>
</table>
</body>
</html>
<script type="text/javascript">
if(document.images) {
tempImage = new Image();
tempImage.src = "http://www.ehobbyplanet.com/Items/RC/HPI/10620/Image-1md.jpg";
tempImage.src = "http://www.ehobbyplanet.com/Items/RC/HPI/10620/Image-2md.jpg";
tempImage.src = "http://www.ehobbyplanet.com/Items/RC/HPI/10620/Image-3md.jpg";
tempImage.src = "http://www.ehobbyplanet.com/Items/RC/HPI/10620/Image-4md.jpg";
tempImage.src = "http://www.ehobbyplanet.com/Items/RC/HPI/10620/Image-5md.jpg";
tempImage.src = "http://www.ehobbyplanet.com/Items/RC/HPI/10620/Image-6md.jpg";
tempImage.src = "http://www.ehobbyplanet.com/Items/RC/HPI/10620/Image-7md.jpg";
tempImage.src = "http://www.ehobbyplanet.com/Items/RC/HPI/10620/Image-8md.jpg";
function changePic(newName) {
newPicURL = "http://www.ehobbyplanet.com/Items/RC/HPI/10620/"+newName+"md.jpg";
mainPic.src = newPicURL;
</script>
That's the best solution I can offer.
Nancy O.
Alt-Web Design & Publishing
Web | Graphics | Print | Media Specialists
www.alt-web.com/
www.twitter.com/altweb

Time Machine not displaying backups of mounted /Users

Bottom Line: Time Machine 'Warp' GUI does not display available backups when using Finder to browser user directories stored on HDD, mounted on /Users in /etc/fstab, even though the backups exist and I can navigate to them from the Finder to the backup disk
Machine Config:
1. OS X Lion 10.8.5 on MBP 2.53 GHz Intel Core 2 Duo running on a SSD as the OS X boot drive, and the OEM HDD in a drive tray in what used to be the superdrive bay.
2. The HDD is a single partition dedicated to Users and mounted to /Users. When unmounted, the SSD has a /Users dir with a single admin-enabled user still present to ensure I can still boot and log in as that user in the event the HDD does not mount.
3. The /Users dir mounts successfully using /etc/fstab
4. The HDD still displays in the Finder window and the desktop, which is not a problem for me
I've posted a work-around at http://www.andrew.cmu.edu/user/mlanham/currEvents.shtml that explains I can, inside the TM restore GUI (what I've heard called 'warp' and 'space') select the machine label under the Devices list in Finder (on the left side). I can then expand folders without double clicking them, and get TM to restore the file(s)...TM sees the backups as present and available and functions as I would expect.
However, when I select a labeled location (e.g. Google Drive, Downloads) under the Favorites label, still inside the TM restore GUI, all the backups are black and do not otherwise indicate they are present for restore actions.
I thought I read a blurd somewhere warning me of this situation, but I cannot find the blurb anymore--surely I'm not the only one to have experienced this. Has anyone else experienced it? Overcome it?
More importantly, I am interested in knowning if this is 'as designed' behavior or a bug in TM's GUI presentation. Why should TM care if a dir is a mounted partition or not...if it was present during backup, and present during a restore request, it should render the available backups as available to select. Not make me do a work around.

Earlier, I posted that the OP in https://discussions.apple.com/message/8182305#8182305 resolved this situation by making a softlink from SSD /Users to HDD's /Users and removing the entry from /etc/fstab. Initially, I thought this was a bad idea, as if the HDD fails to spin up and mount to /Volumes, that the system would fail to boot as it would not find a /Users directory available.
Then I read a different post that implied that if that happens, simply boot to single user mode and fix the trouble with the HDD.
Is this soft-link + boot to single user mode a better choice than /etc/fstab to mount the HDD to /Users (where the SDD has a non-empty /Users with a single admin-enabled user in it)?

Lion finder window not displaying file info

I have a MacPro which I've updated to Lion. I have four hard drives installed. When I open a finder window from three of the drives, I get the expected (from Snow Leopard) behavior: in icon view, images display pixel dimensions, movies or audio files display run time. This is assuming I have Show Item Info clicked in the View Options. But if I open a finder window on my start-up drive the file info is not displayed. If I open the View Info panel and click/unclick the Show Item Info ckeck box, I can see space expand or contract beneath the file, but no info is displayed. Is this a bug or a "feature"?

Please read this whole message before doing anything.
This procedure is a test, not a solution. Don’t be disappointed when you find that nothing has changed after you complete it.
Step 1
The purpose of this step is to determine whether the problem is localized to your user account.
Enable guest logins* and log in as Guest. Don't use the Safari-only “Guest User” login created by “Find My Mac.”
While logged in as Guest, you won’t have access to any of your personal files or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin.
Test while logged in as Guest. Same problem?
After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.
*Note: If you’ve activated “Find My Mac” or FileVault, then you can’t enable the Guest account. The “Guest User” login created by “Find My Mac” is not the same. Create a new account in which to test, and delete it, including its home folder, after testing.
Step 2
The purpose of this step is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login, or by a peripheral device.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode and log in to the account with the problem. Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including sound output and Wi-Fi on certain iMacs. The next normal boot may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem?
After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of steps 1 and 2.

CmcApp home.faces page will not display.

We have just completed (?) the installation of BOJ 3.1 XI SP 3 and the BOJ SAP integration kit SP 3. The installation is on SQL Server 2008 and SAP Netweaver 7.01 SP 7.
Each time after logging in the the CmcApp page using Administrator and the Enterprise authentication, the next page does not display. In IE8 a download window opens. In IE7 and Firefox the garbage is displayed. I have seen this thread: Re: CmcApp bug on BOE 3.1 using SAP WAS 7.0 and set *.faces to NEVER COMPRESS without any success. The thread just list is still marked as unanswered after a year.

Hi,
As per my knowledge, we need to do some changes in the application server configurations, in your case it is SAP Netweaver 7.01 SP 7 when BOE is deployed to the SAP NW Java server.
Try the below steps and do verify once again whether it resolves the issue:
1.     Launch the Visual Administrator tool.
2.     Connect to the SAP J2EE Engine by clicking Connect -> Login, select the appropriate connection, and click on the Connect button. Enter the password and click on the Connect button.
3.     Navigate to the HTTP Provider service by going to the Cluster tab, expanding Server, expanding Services, and clicking on HTTP Provider.
4.     On the right side of the screen, click on the Properties tab.
5.     Click on the AlwaysCompressed key. At the bottom of the screen in the Value field, remove "text/html" (without the quotes). Click on Update.
6.     Click on the NeverCompressed key. At the bottom of the screen in the Value field, add "text/html" (without the quotes). Click on Update.
7.     At the top of the screen, click on the Save Properties button.
8.     Restart the NetWeaver server.
-Noor.

MAX will not display any installed modules mounted to cRIO-9074 chassis WinXP SP3 LV2010 developer

MAX will not display any installed modules mounted to cRIO-9074 chassis WinXP SP3 LV2010 Developer Suite.
I can see the backplane in MAX and Project explorer but none of the modules show up for configuration in the drop down lists. The LV was just installed on the PC with RT/FPGA/Sound and Vibration. I have Admin and am accessing through a PCMCIA Ethernet card. I have to disable normal wireless Ethernet just to see the cRIO unit at all.

Well, you actually won't be able to see the C-series modules for a cRIO in MAX. Take a look at this KnowledgeBase article for a little more information.
As far as not being able to see them in the Project explorer, are you trying to run in FPGA or Scan Interface? If you're using the FPGA Interface, you'll have to make sure to expand the FPGA Target tree in the Project explorer to see these modules.
Regards,
Austin S.
National Instruments
Academic Field Engineer

The Japanese file name is not displayed.

I'm using Mac OS 10.5.3(intel)/Adobe Media Player 1.0
In "Personal Videos",The Japanese file name is not displayed.
Example, "日本語.flv" is added, ".flv" is displayed in "Personal Videos".

Thank you for reply.
>Try this: Go to the Apple menu > System preferences > International > Languages. Add Japanese to the list of languages, if it does not appear there already. If you drag Japanese above English in the list, the finder and many other applications will open next time with Japanese menus. Even if you do not want Japanese menus, make sure Japanese appears somewhere in your list of languages. Just having it there unlocks Japanese features in certain software, like Japanese encoding in Apple's Mail application.
When trying, the problem was not improved.
>If the Japanese menus make things hard for you in certain applications, you can set the language of specific applications individually using the following method: First, select the application's icon in the finder and choose "Get Info"from the File menu.
>
>Expand the Languages section of the Get Info window, and you'll see the languages available for the application. If you check Japanese and uncheck English, you will get Japanese menus; if you check English and uncheck Japanese, you'll get English menus. If both are checked, the language is determined by the order of languages in the International Preferences Pane.
In "Get Info" of the application based on Adobe AIR, "Languages section" is not found.

Hi my website it working fine on all other browsers but on firefox it is not displaying properly. I was hoping to send a screenshot to see if anyone had any ideas why this might be happening.

I have nearly finished my website and on all other browsers I have tried the website loads correctly, but some expandable boxes on my website are not displaying on firefox.
Does anyone have any ideas on how I can fix this.
[[http://tinypic.com/r/2rwvk7n/5]]
[[http://tinypic.com/r/69fbdd/5]]
This is firefox on a mac.

Can you post a link?
A good place to ask advice about web development is at the mozillaZine Web Development/Standards Evangelism forum.<br />
The helpers at that forum are more knowledgeable about web development issues.<br />
You need to register at the mozillaZine forum site in order to post at that forum.<br />
See http://forums.mozillazine.org/viewforum.php?f=25

BSP iview Pages not displaying since moved to QA?

Hi All,
We're using MSS 60.1.20 and ESS 50.4. We have created a number of custom BSP iviews and have grouped them on some custom pages. These work perfetly fine in DEV but once we transported them to QAS, they data is not being displayed. The iview titles are being displayed and the iviews are in the correct position but no data is being output on the iviews. I've checked the BSP in R/3 and is working perfectly fine.
If i preview the iviews individually (rather than previewing the page in it's entirity), they display perfectly fine.
So why do they not display when they're on the page? Is there some parameter that i'm missing?
What could be different between dev and qas?
This is a very strange problem and its holding us up in our testing and we're due to go live fairly soon, so any guidance would be most welcome.
Thanks in advance,
Liz.

Liz,
check the height of the page.
there will be a expand/collapse on the top right corner,check whether it is expanded or not
Thanks
Bala Duvvuri

Project 2010 Filter Selector (+/-) Not Displaying

Hello all.
I'm using Project 2010 and am having a problem with the "filter selector" - the "+" or "-" symbols which allow you to roll-up or expand sections.
I first noticed this with Summary Tasks in my project file not displaying the small boxed in "+" or "-" symbols. I've hunted around for a setting option that could affect this but haven't come up with one.
Now I've noticed the same thing when using the "Group by:" function and choosing "Critical." The tasks do group by Non-Critical and Critical - but there's no "+" or "-" symbols Critical: No or Critical:
Yes lines and thus I can not collapse them or expand them.
Complicating things is when I create a project schedule of my own in order to test things and those "+" or "-" symbols appear and function as expected. The project file in which they are lacking seems to lack them on other
computers than mine so it doesn't seem to be a particular hardware issue.
Is there some setting in Proj 2010 that I'm missing?
Is this an indication that the Project file itself is corrupted?
While a somewhat low level problem, this is reducing the functionality within that file and if the file itself is corrupted them that could lead to other problems.

Madoc,
There is a setting, (now hidden in Project 2010), that turns on and off the outline symbols and that setting is saved with the file. There are various ways to correct the issue but let me show you where to find the setting so the next time, if there is a
next time, you will be prepared.
1. Right click in the ribbon area to bring up the "customize the ribbon" item
2. On the right side of the Project Options window, hit "New Tab" and then "New
3. Under that new tab you will see a "New Group". Select it
4. On the left side chose "Commands not in the ribbon"
5. Find the Outline Symbols and select it
6. Hit "Add" to put that into your new group under your new tab
7. Hit "OK"
Now select your new tab on the ribbon and you should see the Outline Symbols option unchecked (for this particular file). Check it and close.
You might want to peruse the list of other commands not in the ribbon that you've been racking your brain to find and add those to your new tab. I did.
If the Outline Symbols option is already checked for this file then the file is probably corrupt. In that case save to XML and re-open in Project. Note, you will lose any custom formatting.
If this answers your question, please mark it as the answer.
Hope this helps.
John

UIX page not displaying data from VO's

I have an application where my users log in by passing a username/password to a client method in my application module. The Webusers View Object has a view link to the Customers view object, which has a view link to the Orders view object, which has a view link to the OrdLines view object, like this:
WebusersView
--CustomersView via WebCustViewLink
----OrdersView via CustOrdViewLink
------OrdLinesView via OrdOrdlinesViewLink
I've run this Application Module through the tester and I can see data via all the View Links.
I have the following code in my login() script:
w = getWebusersView();
w.setWhereClause("login = '" + username + "'");
w.executeQuery();
I've stepped through the login() code and it works correctly. If I understand BC4J correctly, then all of the View Links should fire and coordinate the data from Customers, Orders, and OrdLines when this query executes successfully.
I created a UIX page and did a drag/drop of Orders to the page as a read-only table. I found the Orders table by expanding the Webusers entry in the Data Control palette, then the Customers entry below that, to grab the Orders entry there. I think this means that it will follow the WebCustViewLink to get the Customer that goes with the Webuser, then the CustOrdViewLink to get the Orders for that Customer. Is this correct?
When I try to run this and display the table, I get no records. I know for a fact that records exist under the Webuser username I've chosen.
What is wrong? Why doesn't my UIX page display the appropriate Orders based on the Webusers->Customers->Orders view links?

If there, try removing the $. at the beginning of the binding that gets puts there if you select the item from the pop up list.
I have a text field that is read only and bound without the $. that was working fine for displaying data. I have a drop down that had the $. and was not saving. I removed the $. and now it is getting saved to the XML. However, it does not display on the next render of the form.

SQL Developer 3.0.04 worksheets not displaying

Worksheets are not displaying in SQL Developer 3.0.04.34 (download included JDK1.6.0_11) on Windows 7 Enterprise 32-bit. I upgraded from 2.1.1.64 and chose to migrate existing connections.
I am able to open all connections, view table and object listings in the navigator tree view, and expand tables to see column names, but nothing displays when I click the Data tab, Columns, Grants, or any other tabs. No column headings appear. No error messages appear.
When opening views, I am able to click on the SQL tab and retrieve text.
No data displays when I run a query. The same thing happens when I try anything that should return data, such as Tools...Monitor Sessions, anything from the new DBA navigator, anything from the Reports tab.
This is only happening on one of two Windows 7 PCs I have installed it on (both upgraded from 2.1.1.64), so I know it should work.
I have tried:
re-installation
reboots
separate installation of Java JDK 1.6.0_25 and the SQL Developer version that excludes the JDK
uninstalling Java to eliminate conflicts
locating the SQL Developer folder outside of Program Files to eliminate Administrator permission issues
editing SetJavaHome in sqldeveloper.conf
Has anyone seen this same problem?

I just solved my own problem. I don't know what caused it, but the fix is fairly simple.
SQL Developer is not installed in Windows using an installation program, and to my knowledge doesn't have registry entries. Application-specific configuration and temporary data is kept in
C:\Users\<username>\AppData\Roaming\SQL Developer\
This folder contains information for all copies of SQL Developer installed on the computer.
Before re-installing, it is necessary to completely uninstall version 3.0.04. This is done by deleting the folder where you installed SQL Developer, in addition to the following AppData folder:
C:\Users\<username>\AppData\Roaming\SQL Developer\system3.0.04.34
I also deleted C:\Users\<username>\AppData\Roaming\SQL Developer\SqlHistory, but that might not have been necessary.

Macbook pro not displaying music library: What do I need to do to show music files in Library? They are not showing up.

macbook pro not displaying music library: What do I need to do to show music files in Library? They are not showing up.

If you click View, Show Sidebar you will see the other libraries under Shared in the left hand column. Click on the Library you want and you can expand it to select Music, Movies etc. Select whatever items you want and click import if you want to move them to your Library.
You will have to have all computers authorised with the relevant Apple ID's
Store > Authorise this computer...
This is separate from the Home Sharing username and password and is to allow playing of DRM Movies, TV shows etc from the other computer.
If both Computers use the same apple id this step is not required.

Recordings on DVR Expander not displaying

Similar Messages

Maybe you are looking for