Project 2010 Filter Selector (+/-) Not Displaying

Hello all.
I'm using Project 2010 and am having a problem with the "filter selector" - the "+" or "-" symbols which allow you to roll-up or expand sections.
I first noticed this with Summary Tasks in my project file not displaying the small boxed in "+" or "-" symbols. I've hunted around for a setting option that could affect this but haven't come up with one.
Now I've noticed the same thing when using the "Group by:" function and choosing "Critical." The tasks do group by Non-Critical and Critical - but there's no "+" or "-" symbols Critical: No or Critical:
Yes lines and thus I can not collapse them or expand them.
Complicating things is when I create a project schedule of my own in order to test things and those "+" or "-" symbols appear and function as expected. The project file in which they are lacking seems to lack them on other
computers than mine so it doesn't seem to be a particular hardware issue.
Is there some setting in Proj 2010 that I'm missing?
Is this an indication that the Project file itself is corrupted?
While a somewhat low level problem, this is reducing the functionality within that file and if the file itself is corrupted them that could lead to other problems.

Madoc,
There is a setting, (now hidden in Project 2010), that turns on and off the outline symbols and that setting is saved with the file. There are various ways to correct the issue but let me show you where to find the setting so the next time, if there is a
next time, you will be prepared.
1. Right click in the ribbon area to bring up the "customize the ribbon" item
2. On the right side of the Project Options window, hit "New Tab" and then "New
3. Under that new tab you will see a "New Group". Select it
4. On the left side chose "Commands not in the ribbon"
5. Find the Outline Symbols and select it
6. Hit "Add" to put that into your new group under your new tab
7. Hit "OK"
Now select your new tab on the ribbon and you should see the Outline Symbols option unchecked (for this particular file). Check it and close.
You might want to peruse the list of other commands not in the ribbon that you've been racking your brain to find and add those to your new tab. I did.
If the Outline Symbols option is already checked for this file then the file is probably corrupt. In that case save to XML and re-open in Project. Note, you will lose any custom formatting.
If this answers your question, please mark it as the answer.
Hope this helps.
John

Similar Messages

Filter value not displaying

Hi all,
I have a issue with selecting the filter value for a unit.
The problem is I can find the value when I run the query in BEx, but same value is not displaying in webreport.
Can anyone tell me, what might be the problem.
(Actually I have to filter on a perticular unit value. In the masterdata I have 30 values.when I exicute the report in BEx I can find all 30 values.But when the same report in web I can see only 29 values)

You can display values& texts for variables using menu button where you can display the text elements.
Regards
Pradip

BEX query: filter is not displayed in one of the users

Hi,
We created a BEX Query with a Month/Year filter.
When I run the query with my user, it's working ok (photo 2).
When I run it with another user, the filter is not dislayed (photo 1).
I've checked the role with PFCG, bit i don't know what it's misssing. The infoarea, infocube and name of the query are included in the PFCG, as well as the activities: execute, visualize, etc. (Photo 3).
Any ideas?
Thanks in advanced!!
Florencia

Hi,
Just compare assigned roles for My user and other user.
Then you may know the missed authorizations.
As my guess your issue will authorization related one.
Thanks

Sharepoint 2010 - Home Page not displaying, all other pages work fine

The web page URL <server>/sitepages/Home.aspx is not displaying when accessed. All other pages work fine. We changed the default welcome page to another page, and that works. When we try to access the Home.aspx, it displays "An unexpected error
occurred" message. The Home.aspx only contains a couple of Lists, with Links, and a calendar. The other odd thing is that the Home.aspx displays in SharePoint designer in Advanced Edit mode, but won't display in a browser. Any ideas?

Hi Isepic,
1) Check the approval of the page (Home.aspx) whether it is in pending state .
2) OR might be some problematic webpart is added in the page. You can try to close it and access. To do that,you can try to access the web part maintenance page of home.aspx and test by closing the webpart one by one.
To access the maintenance page,pass the parameters ?contents=1 after the home.aspx
For example, http://site url/home.aspx?contents=1
3) Also,check the ULS logs after accessing the home.aspx to know what is happening.
Please remember to mark your question as answered & Vote helpful,if this solves/helps your problem.
s p kumar

WAD: Height of Filter pane not displayed correctly in SPS14

Hi Experts,
I just moved to SPS14 and I noticed on our Web Templates that Filter Pane are reduced in comparison with what I had in SPS10.
For Instance, for an height of 18 I was able to display properly 2 dropdown boxes in Filter pane. Now I am not able to see them unless I increase height.
Is it related to a new function of SPS14?
Thanks in Advance

Hey,
I am just copying your answer, you gave in another thread, to limit the search time for other users:
italics What worked was another possible way, e.g. to maintain the SAPBWKEY in the Arcview software delivered by ESRI. Using the Arcmap -application.
-Rightclick on the respective layer, then 'Open Attribute Table'
-Press Button 'Options': Add field. Name = SAPBWKEY, 'Type' depending on your characteristic
-Next Step: Editor ( a menue you need to load into ArcMap) --Start Editing
-Then again: Rightclick on the respective layer, then 'Open Attribute Table'
-Now you can maintain values for the SAPBWKEY
-Editor: Stop Editing (save changes)
Rightclick on the respective layerData-Export data
The last step exports the modified shapes files, which can then imported to your info object.italics
Greets
Marcus

Outlook 2010 People Pane not displaying all Accepted, Tentative, Declined, or Not Responding, for meeting requests.

I have a user that sends out a local employee meeting request, so it goes out to about 100 people. She then tracks the responses by opening the event in her calendar, and looking at the information in the people pane. But this only shows her
59 responses. I was having her copy the tracking to a clipboard, then pasting it into an excel sheet. Then she could sort it to see who isn't going, or hasn't responded. but that also only populates 59 people. We use exchange server,
and she's running exchange 2010.
I'd appreciate any help, or suggestions.
thanks,
Jeff

Hi Jeff,
How many people can you see if we open the meeting and view the tracking information from OWA?
Are the missing people external meeting attendees? By default, Microsoft Exchange Server 2010 is not configured to process external meeting requests or meeting responses. Your mailbox has to be configured to process external meeting requests and meeting
responses.
For more information, please refer:
http://support.microsoft.com/kb/2331322
Hope this helps.
Regards,
Steve Fan
TechNet Community Support

Project 2010 Product Key Not validating

Used the trial version of 2010, bought a 'used' license from Amazon reseller, but product key will not validate. Any ideas about cause?? Perhaps Trial Version is still causing issues with new key??? (Windows 7, 64bit)

"Used" licenses are ones that have already been validated by another user. You might have bought a copy that you can't validate which would explain your problem. When you try to validate there is a choice between validating on-line or through
an 800 number. Call the number and see if they will validate the version you have. Ellen Lehnert, PMP, MCT [email protected] www.lehnertcs.com Training/Consulting/Author

SharePoint 2010 Datasheet View - Filter not displaying correctly on list

Hi,
I have a list where I want to filter in datasheet view. The filter will work correctly when I first open Internet Explorer:
However, if I open the list again and go into datasheet view I get the following filter which does not display correctly:
Has anyone else come across this?
Mark

Hi Mark,
please have a try on this kb too:
http://support.microsoft.com/kb/2760758/en-us
Regards,
Aries
Microsoft Online Community Support
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

Project Server 2010 - Project Permissions - Users and Groups filter is not working

Hi,
While giving permissions from project center ribbon on a project - Users and Groups filter is not working, we are not able to filter any user.
I am not sure why this error is occurring i tried giving permissions by opening the project but still the same filtering is not happening. Below is the screen shot
We have installed Service Pack 2 and June 2014 CU recently will this effect ?
Can any one throw some light on this??
Geeth If you feel that the answer which i gave you is Helpful please select it as Answer/helpful.

Hi Geetha,
Which IE version are you using? First I'd try to add the URL to the compatibility mode sites, then to the trusted sites (if it is not done already). Then I'd try to set the default browser as IE8 or 9 (pressing F12, developer tool).
Hope this helps,
Guillaume Rouyre, MBA, MVP, P-Seller |

SharePoint 2010 list view - How to filter on a multiline text box field - the view filter does not allow me to select it.

Hi there,
Does someone know in SharePoint 2010 list view - How to filter on a multiline text box field - the view filter does not allow me to select it.
Thanks,

Hi，
Per my knowledge,
it is by design that the data type multiple lines of text can only use “contains” and “begins with” operators.
You can also filter the list view using SharePoint Designer,
Open your list AllItem.aspx page in SPD ->click “Filter” > in “Field Name” select your multipe line of text field, in “Comparison” will displayed four choices.
Best Regards，
Lisa Chen
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

Detail sections not displayed with Crystal Reports 2010 Runtime (SP1 also)

I have migrated a VB app from RDC 9 to Crystal Reports 2010 and I'm experiencing a very strange issue.
In a report with 6 nested groups, the detail part is splitted in 7 section, and the whole detail has the "keep together" flag activated. At runtime, some detail sections are not displayed. There is no suppress condition on the detail section. The missed sections are those near bottom of the page. I suppose that when there is no room to print the section on the page and it should go on the next page, Crystal forget to display it.
I exported the report in Crystal format and reopened with Crystal Reports designer and the missed section are displayed.
The same report is displayed correctly using RDC 9.
If I show the group tree and select the missed section group, the section is correctly displayed on a separate preview page.
I've some screenshot to better demonstrate the problem.
I hoped SP1 will resolve the issue but unfortunately it didn't.
Pier Alberto Guidotti

This issue has been escalated for a fix. tracking number is TE5000325237. For anyone wanting to attach to this thread with a similar issue, please note the behavior as decribed in the TE below. If the description does not match your issue exactly, please create a new thread.
Description - Steps to Reproduce;
1) Run the report in the CR 2008 designer - note the second page
2) Run the report in VS2010 app using CRVS2010 SP1:
CrystalReportViewer1.ReportSource = <path to report>
3) Look at page 2 and compare to page 2 from the CR2008 designer (also, see attached compare.jpg file which is a screen shot of both views) - note missing group on page 2
4) Export to PDF, DO, RTF - same issue
5) Print to printer using the viewer print button - same issue
6) Same issue print to printer using code:
Dim crReportDocument As New CrystalDecisions.CrystalReports.Engine.ReportDocument()
crReportDocument.Load("C:\Crystal\Test\Forum tests\Alberto missing detail section\Crystal Issue\Distinta di Taglio CR 2010.rpt")
crReportDocument.PrintToPrinter(1, 1, 1, 2)
        MsgBox("Done")
7) Same issue print to printer using code:
Dim crReportDocument As New CrystalDecisions.CrystalReports.Engine.ReportDocument()
crReportDocument.Load("C:\Crystal\Test\Forum tests\Alberto missing detail section\Crystal Issue\Distinta di Taglio CR 2010.rpt")
Dim rcd As ISCDReportClientDocument
        rcd = crReportDocument.ReportClientDocument
        rcd.PrintOutputController.PrintReport()
        MsgBox("Done")
8) Export to RPT file format - view this export in the CR2008 Designer - report looks as it should
9) Add report to the .NET2010 project. trying to view the repor tin the .NET2010 IDE results in .NET crashing.
- Ludek

"Define query parameters" popup in Dataset properties - Refersh field, not displayed for Sps in SSDT 2010 (Works fine in BIDS)

When we upgraded our SSRs projects to 2012, we are facing an issue in Data tools environment.
When we click REFRESH FIELDS button in Dataset properties, With query type as SP (For all our sps), the "Define query parameters" popup is not displayed.
When we checked the SQL Profiler for queries executed at back end , NULL values are used for parameters.
But when we Used the QUERY DESIGNER button, and clicked execute for sp, the popup comes.
For User defined Functions, the Popup comes correctly.
In BIDS, still we can open the RDLs and do the operations correctly
Please advice

Dear Wendy Fu
My Scenario is different.
In Query Designer, Every thing is fine (Parameter Popup is coming, and fields are populated under data set)
But what we need to do is
1, Select Query Type As SP
2, Select the required SP
3, Click Refresh Button
4, A "Define
query parameters" window popsup
5, Provide values and click Ok
6, Fields will be populated under the dataset
The issue we face is that, we are not getting the Define query parameters popup,
Hence NULL values are passed to execute the sp, to retrieve the fields set.
The Work around we are using now is editing the sp, and use
set @Parameter = Value
for each parameters in sp, and then we get the fields populated under dataset, when we click refresh.
The issue exists in both MSDT for
Visual studio 2010 & MSDT for Visual studio 2012.
But every thing is fine in BIDS with VS 2008 Shell for the same RDL

Aperture 3 project does not display any images in one Project

This is a strange situation. The bullets below outline the situation:
The project does not display any images
When I place the pointer over the project it shows there are 500+ images
I have located the RAW images stored in my aperture library
I can pull up the images using a smart folder and searching for photos taken on the event day
This is happening only to one of my projects that I know of (weird!!)
I have tried to 're-add' the image by both importing and dragging and dropping into the project, neither works
I tried the following basics:
Fixed permissions
Rebuilt the database
Tried to re-import the data, but when I have the 'don't import duplicates' these are not an option
Found the images in my Aperture library
I created another project and drug all of the images into that project
Any idea how I can fix this?
My fear is that if I delete the original project, the original master images will be deleted.

The most common cause of this is some sort of stuff in the search box at the top of the browser that you don't expect to be there. Just clear it and all your images should show up.
RB
One note - if you drug your images from one project to another it moves them vs copies them unless you hold down the option key.

I've been using FCP 7 on my iMac for quite some time with great success. Lately I created a new project and the browser window does not format properly (it's O.K. for previously created projects). The effects window is also not displaying properly.

Help! My browser window is suddenly not formatting properly. (losing browser formatting, glitch, bug) I'm using FCP 7 on an iMac with OS X 10.8.5 and have been successfully doing so for a couple of years. I fear my Final Cut Pro is corrupt and I have to re-install. Anyone ever see this problem? Old projects display and behave fine in the browser, but any new project I create, totally loses the formatting in the browser and the browser also does not display the "effects" window properly anymore. (see below)

YOU ARE A LIFE SAVER! I reinstalled the program and everything. THANK YOU! THANK YOU! MY HERO!!!

Few values of report column do not display in report while applying filter

Post Author: anuragg11
CA Forum: WebIntelligence Reporting
There are 6 drill filters applied on the report to filter out the report column data. Few values of the report are not displaying in the report when using drill filter. Same issue is with report filter too. If filters are removed then values are appearing in the report. We are using version BO XI R2 & Java runtime JRE 1.4v. It doesn't look issue is with Java version because only few specific data of the report column are not shown in the report when using filter on the data. Example: One of Report data column contains below values: 24.2, 26.9, 120.1, 230, 274.9, 275.8, 333.2 Report is displaying all these values when there is no filter on any data. But report doesn't display data when applying filter on 274.9 or 120.1 howver filter on other values 24.2, 26.9, 230, 275.8, 333.2 are working fine.

Hello,
I think i know what your problem is.
Although in table view your 2 requests combine perfectly and show separate results in pivot view BI unfortunaterly adds them up.
One work around would be to go in your criteria add in each request a dummy column. This can be obtained the following way:
1. click on a column to add it in the criteria (it doesnt matter which one)
2. go into the edit formula of that column
3. delete the formula and in its place write 'Dummy Column 1'
Do the same for the second request by adding a "Dummy Column 2'
Now the Pivot Table should also show up correctly
Let me know if it goes well or if you have any further questions,
Kostis

Project 2010 Filter Selector (+/-) Not Displaying

Similar Messages

Maybe you are looking for