Recreate the translation repository

After a database problem our dba dropped apex and installed apex again. After the new apex installation I imported the apex application for the primary language (=APP_ID "1" is german) and the translated application (=APP_ID "11" is english). Then I wanted to check the tranlation repository and saw, that the translation repository was empty.
So I used the utility "Seed translatable text to translation repository". When I looked at the apex page "Manually Edit Translation Repository", I can't find my translations. All words in die APP_ID "11" are in "german".
Is there a possibility to synschonice the "german" and "englisch" application and save the results in the translation repository (=in the table "wwv_flow_translatable_text$") ??????
Can anyone help me!
Regards
Robert

Hi,
my question whether i can recreate a central inventory any where by specifying the inventory_loc=$ORACLE_BASE/orainv or $ORACLE_BASE/db/tech_stAs per the note specified will it be enough if we move the orinv to the new location
Yes you can but under ownership of oracle binary install user.
Pls read note i mentioned:-
it says:-
1) Find the current location of the central inventory
2) cat /etc/oraInst.loc
inventory_loc=/u01/app/oracle/oraInventory
*3. Copy the oraInventory directory to the destination directory* -- you need to copy to new location before making changes in oraInst.loc
4. Edit the oraInst.loc file to point to the new location
I hope it clears your doubt.
Thanks,
JD
Edited by: user12001639 on 27-Apr-2011 08:44

Similar Messages

Recreating the Management Repository Failed

Hi,
I tried to recreat the Management Repository with no luck.
Oracle 11g R2 on RHLinux 5
Dropping the repository finished with no problem using the following command:
./RepManager rac1 1521 ron_1 -sys_password **** -action drop -repos_user sysman
Creating the repository failed:
./RepManager rac1 1521 ron_1 -sys_password qwer5 -action create -repos_user sysman
Following link is the output of executing the script:
http://www.ahmedbaraka.com/temp/repmgroutput.txt
Any hint is appreciated.
I wish I once tried something new in Oracle and it went smoothly without a problem!

I think you found the solution for your previous post? ORA-12505 after implementing RAC One Node
However recreating the repository did not work (completely).
Do you have any info on this in the alert log/xml file?
Since you are on a one node RAC you may have to consider it as a cluster. See note How to manage DB Control 11.1.0.x for RAC Database with emca [ID 578011.1]
Eric

FTP adapter failing sometimes, msg:Error connecting to the OAI Repository

Hi,
I have imported a dump due to curropt metadata definition. The import was successful without any warning/error.
I have recreated the event , but when I am testing the same, getting following error in the FTP adapter, though the adadpter is started successfully, connecting to hub /repository, still trowing below errror when it translates a file:
Sometimes it works when the adadpter is killed & restarted.
Ususally happening when a new event is created & run for the first time...
++++++++++++++++++++++++++++++++++++++++++++++++++++
++++++++++++++++++++++++++++++++++++++++++++++++++++
<A N = "do_no">428997</A>
<A N = "mdo_no">
</A>
</AO>
</AO>
</AO>
</B>
</MSG>.
Mon Oct 03 17:18:45 SGT 2005: Transport logs:
Message linked list has 0 elements.
Mon Oct 03 17:18:45 SGT 2005: Transport logs:
FileReceiver.sendResponse() completed.
Mon Oct 03 17:18:45 SGT 2005: Transport logs:
FileReceiver.receive() is invoked.
Mon Oct 03 17:18:45 SGT 2005: Transport logs:
The message queue is empty.
Mon Oct 03 17:18:45 SGT 2005: Initializing connection to the Repository...
Mon Oct 03 17:18:46 SGT 2005: Connected to the Repository.
Mon Oct 03 17:18:46 SGT 2005: Error connecting to the OAI Repository. Please make sure that the hub database and the OAI Repository are started properly. Once everything is started properly, the connection will be automatically re-established. However, if you have provided incorrect parameters concerning your hub database or the OAI Repository during installation of this Adapter, please stop the Adapter, fix the information and restart.
oracle.aob.repository.aobRepositoryCartridge.RepositoryException
++++++++++++++++++++++++++++++++++++++++++++++++++++
++++++++++++++++++++++++++++++++++++++++++++++++++++
Any pointers on this will be a great help for me.
Regards,
MOhit

In same context, what I observed is that the FTP adapter throws above error if a file is send again for translation...ie; when i try to use the same file for testing putingit in FTO dir , FTP adapter hangs throwing above error.
Even after few runs of other files.
Is it something related to the security feature of the product which prohibits sending the contents of message if the same contents are send previously?
Actullay I had never faced such issue before & use to do the testing with same file itself.
oai_agent_error has following entry in internalid column:
MetadataManager_RepositoryConnectionErrorWithoutOID
When I kill the adapter, the same msg is picked up by the subcribing adadpeter(dbadapter) & puts the data into the table.
Tough I m fixing the above issue as below:
1- kill the FTP adapter
2- remove its entries in componentinfo table.
3-deleting all rows in oai_hub_queue.
4- stop other adapters.
5- Stopping & restarting the repository again.
Still not sure whether error throwing by adapter is expected functionality in iStudio, or something is missing in the setting done in my setup?
Regards.
Mohit

An error occurred during creation of the central repository. (BODI-300020)

I am trying to create a central repository for Data Service, the following error appear
Creating repository... (BODI-300026)
Reading SQL file <C:\BO\DataServices_12\admin\repo\MSSQL\ms.sql>. (BODI-20001)
Executing SQL file <C:\BO\DataServices_12\admin\repo\MSSQL\ms.sql>. (BODI-20002)
Reading SQL file <C:\BO\DataServices_12\admin\repo\MSSQL\ms_content.sql>. (BODI-20001)
Executing SQL file <C:\BO\DataServices_12\admin\repo\MSSQL\ms_content.sql>. (BODI-20002)
Reading SQL file <C:\BO\DataServices_12\Admin\repo\options.sql>. (BODI-20001)
Executing SQL file <C:\BO\DataServices_12\Admin\repo\options.sql>. (BODI-20002)
Verifying repository... (BODI-300077)
Importing objects... (BODI-300036)
Adding Data Quality new substitution configuration... (BODI-300133)
An error occurred during creation of the central repository. (BODI-300020)
It's a sql DBMS, and the default user language is spanish, during the installation was the same issue.
The first installation user language was english and everything was ok, then the default user anguage was set to spanish and the jobs crashed because an english format was sent to the al_history table. I tried to recreate the repository and an error ocurrer during the creation.
has someone faced the same problem?

what is the version of Data Services ? if its 12.2, then there was a bug that is fixed in 12.2 SP1 (12.2.1.0), apply the SP1 or it would be better if you apply the latest fix pack for 12.2 i.e 12.2.1.2
the problem was with date format used in insert was different than the user's default date format.

The Em Key is not configured properly or is corrupted in the file system and doe s not exist in the Management Repository.

I'm getting this error and is there any way to resolve this without re-creating the service/s again, etc. Just curious if there are any suggestions/steps I may have missed, if not, I'll drop and recreate the services again
Anyway, I have a backup of the emkey.ora and put it in the sysman/config directory, but still doesn't work... please see below...
C:\Documents and Settings\abigail>emctl status emkey
Oracle Enterprise Manager 11g Database Control Release 11.2.0.1.0
Copyright (c) 1996, 2010 Oracle Corporation. All rights reserved.
Please enter repository password:
The Em Key is not configured properly or is corrupted in the file system and doe
s not exist in the Management Repository. To correct the problem:
1) Copy the emkey.ora file from another OMS or backup machine to the OH/sysman/c
onfig directory.
2) Configure the emkey.ora file by running "emctl config emkey -emkeyfile <emkey
.ora file location>".
C:\Documents and Settings\abigail>emctl config emkey -emkeyfile E:\app\abigail\p
roduct\11.2.0\dbhome_1\sysman\config
Oracle Enterprise Manager 11g Database Control Release 11.2.0.1.0
Copyright (c) 1996, 2010 Oracle Corporation. All rights reserved.
Please enter repository password:
The Em Key is already configured. To override the current configuration, run "em
ctl config emkey <options> -force".
C:\Documents and Settings\abigail>emctl config emkey -emkeyfile E:\app\abigail\p
roduct\11.2.0\dbhome_1\sysman\config -force -sysman_pwd ********
Oracle Enterprise Manager 11g Database Control Release 11.2.0.1.0
Copyright (c) 1996, 2010 Oracle Corporation. All rights reserved.
The Em Key could not be configured. Unable to access file E:\app\abigail\product
\11.2.0\dbhome_1\sysman\config.
C:\Documents and Settings\abigail>emctl secure dbconsole -sysman_pwd ********
Oracle Enterprise Manager 11g Database Control Release 11.2.0.1.0
Copyright (c) 1996, 2010 Oracle Corporation. All rights reserved.
http://ABIGAIL:5501/em/console/aboutApplication
DBCONSOLE already stopped...   Done.
Agent is already stopped...   Done.
Securing dbconsole...   Started.
Please enter repository schema password:
Securing dbconsole...   Failed.
EMKey is misconfigured.

Sorry but I'll have to ignore your suggestion, and don't worry about how I spend my time
AND OHMYGODD IT WORKSS!!! For future reference, this is how I solved it based on my searches, actually based on one particular search:
http://franjv.blogspot.com/2013/08/emkey-problems-in-oracle-rac-11gr2.html
Thank youuu whoever wrote that and... is it the same "Fran" who helped me the last time?!? Coincidence??
ANyway, thank youuuu

Publishing of the translation for an Iview fails without any notice

We face the followoing problem with an custom IView in SAP portal:
The publishing of the translation for an Iview fails without any notice it only works directly after the IView was deployed.
The translation is done by first generating the translation data then translating to the several languages, marking the data as translated. After that the translation is published via the Translation Worklist Coordination.
All is done in the Portal under Contenet-Administration->Portal Content Translation, Translation Worklist Coordination and Worklist Translation
The publishing works directly after deployment of an iView but if one tries to retranslate the translation is saved in the repository but not published. If we delete the translation Worklist and start over again the translations that are not published are still in the generated data but still we cant publish them.
There is no Information that the publication failed or anything. In the Worklist it just goes back to normal state where we can again generate the translation data.
The Iview is a Java IView for the translation a properties file was created and all the words from properties file show up in the generated data from the Worklist.
We could deploy the Iview every time the translation needs to be changed but the customer wants to do the translation without that step.
We use the following Versions:
Sap Portal nw2004s
sap.com/SAP-JEECOR 7.00 SP10 (1000.7.00.10.0.20061026144500) 20070119122211
sap.com/SAP-JEE 7.00 SP10 (1000.7.00.10.0.20061026144500) 20070119121940
Thanks 4 Help

Please review the terms of your Comcast agreement. Many agreements include scheduled price increases, and typically state that prices will return to the prevailing (almost always higher) rates when the agreement expires.
If you still have questions contact one of their Billing reps at the phone number on your bill or 1-800-Comcast, chat with them using one of the "Account and Bill" options at https://www.comcastsupport.com/chatentry/, or visit a Service Center if one is nearby (check locations and hours at http://customer.xfinity.com/service-center-locations).
Comcast sometimes responds to questions here in the forums, and sometimes they do not. When they do the typical response time is somewhere between a few hours and a few days.

Unable to connect to the informatica repository on oracle database 11g

hi all,
i have installed OBI Apps 7.9.6.0 with informatica 8.6.0 and no hotfix.
Now the problem is , when i create a repository service i get the error
" The service did not start due to the following error: *Unable to connect to the repository Oracle_BI_DW_Base on database* . " here Oracle_BI_DW_Base is also the name of my .rep repository that came with OBI APPS installation.
i have oracle database 11g installed and also created respective user for repository of informatica.
what should i do in this case??
plz help

Good Morning.
I had the same problem and I had the same IE 6, the problem was the translation between the IE6 from http and https, to solve it you just need to open your url typing
https:url:port, do no forget to put the s after the http, with this my problem was solved.
best regards.
Digudi - São Paulo - Brazil
Edited by: user12267194 on 24/11/2009 05:37
Edited by: user12267194 on 24/11/2009 05:38
Edited by: user12267194 on 24/11/2009 05:38

Export/Import full database dump fails to recreate the workspaces

Hi,
We are studying the possibility of using Oracle Workspace to maintain multiple versions of our business data. I recently did some tests with the import/export of a dump that contains multiple workspaces. I'm not able to import the dump successfully because it doesn't recreate the workspaces on the target database instance, which is an empty Oracle database freshly created. Before to launch the import with the Oracle Data Pump utility, I have the "LIVE" workspace that exists in the WMSYS.WM$WORKSPACES_TABLE table. After the import is done, there is nothing in that table...
The versions of the Oracle database and Oracle Workspace Manager are the same on source and target database:
Database version (from the V$VERSION view):
Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - 64bi
PL/SQL Release 10.2.0.4.0 - Production
CORE 10.2.0.4.0 Production
TNS for 64-bit Windows: Version 10.2.0.4.0 - Production
NLSRTL Version 10.2.0.4.0 - Production
Workspace Manager version (from the WM_INSTALLATION view):
OWM_VERSION: 10.2.0.4.3
In order to recreate the tablespaces successfully during the full import of the dump, the directory structure for the tablespaces is the same on the target database's computer. I used the instructions given in this document, section "1.6 Import and Export Considerations" at page 1-19:
http://www.wyswert.com/documentation/oracle/database/11.2/appdev.112/e11826.pdf
Considering that the release of Oracle database used is version 10.2.0.4, I use the following command to import the dump since it doesn't contain the WMSYS schema:
impdp system/<password>@<database> DIRECTORY=data_pump_dir DUMPFILE=expfull.dmp FULL=y TABLE_EXISTS_ACTION=append LOGFILE=impfull.log
The only hints I have in the import log file are the following block of lines:
1st one:
==============================
Traitement du type d'objet DATABASE_EXPORT/SYSTEM_PROCOBJACT/PRE_SYSTEM_ACTIONS/PROCACT_SYSTEM
ORA-39083: Echec de la création du type d'objet PROCACT_SYSTEM avec erreur :
ORA-01843: ce n'est pas un mois valide
SQL en échec :
BEGIN
if (system.wm$_check_install) then
return ;
end if ;
begin execute immediate 'insert into wmsys.wm$workspaces_table
values(''LIVE'',
''194'',
''-1'',
2nd one at the end of the import process:
==============================
Traitement du type d'objet DATABASE_EXPORT/SCHEMA/POST_SCHEMA/PROCACT_SCHEMA
ORA-39083: Echec de la création du type d'objet PROCACT_SCHEMA avec erreur :
ORA-20000: Workspace Manager Not Properly Installed
SQL en échec :
BEGIN
declare
compile_exception EXCEPTION;
PRAGMA EXCEPTION_INIT(compile_exception, -24344);
begin
if (system.wm$_check_install) then
return ;
end if ;
execute immediate 'alter package wmsys.ltadm compile';
execute immediate 'alter packag
The target operating system is in french... here is a raw translation:
1st one:
==============================
Treatment of object type DATABASE_EXPORT/SYSTEM_PROCOBJACT/PRE_SYSTEM_ACTIONS/PROCACT_SYSTEM
ORA-39083: Object type creation failed PROCACT_SYSTEM with error :
ORA-01843: invalid month
failed SQL :
BEGIN
if (system.wm$_check_install) then
return ;
end if ;
begin execute immediate 'insert into wmsys.wm$workspaces_table
values(''LIVE'',
''194'',
''-1'',
2nd one at the end of the import process:
==============================
Treatment of object type DATABASE_EXPORT/SCHEMA/POST_SCHEMA/PROCACT_SCHEMA
ORA-39083: Object type creation failed PROCACT_SCHEMA with error :
ORA-20000: Workspace Manager Not Properly Installed
failed SQL :
BEGIN
declare
compile_exception EXCEPTION;
PRAGMA EXCEPTION_INIT(compile_exception, -24344);
begin
if (system.wm$_check_install) then
return ;
end if ;
execute immediate 'alter package wmsys.ltadm compile';
execute immediate 'alter packag
By the way, the computer of the source database is Vista 64 in english and the destination computer is Vista 64 in french, do you think this has anything to do with these error messages? The parameters of the NLS_SESSION_PARAMETERS view are the same in the source and target database...
Thanks in advance for your help!
Joel Autotte
Lead Developer
Edited by: 871007 on Jul 13, 2011 7:31 AM

I tried to import the full database dump with the "imp" command and I had the same error message with more detail:
. Import d'objets SYSTEM dans SYSTEM
IMP-00017: Echec de l'instruction suivante avec erreur ORACLE 1843 :
"BEGIN "
"if (system.wm$_check_install) then"
" return ;"
" end if ;"
" begin execute immediate 'insert into wmsys.wm$workspaces_ta"
"ble"
" values(''LIVE'',"
" ''194'',"
" ''-1'',"
" ''SYS'',"
" *to_date(''09-DEC-2009 00:00:00'', ''DD-MON-YYYY HH"*
*"24:MI:SS''),"*
" ''0'',"
" ''UNLOCKED'',"
" ''0'',"
" ''0'',"
" ''37'',"
" ''CRS_ALLNONCR'',"
" to_date(''06-APR-2011 14:24:57'', ''DD-MON-YYYY HH"
"24:MI:SS''),"
" ''0'',"
" '''')'; end;"
"COMMIT; END;"
IMP-00003: Erreur ORACLE 1843 rencontrée
ORA-01843: ce n'est pas un mois valide
ORA-06512: à ligne 5
The call to the TO_DATE function with the string of the date format is incompatible with the format and language set in the NLS parameters of my database. Since I know that the "imp" and "exp" commands work client side (unlike "impdp" and "expdp"), I did a full export of the source database from the computer on which I try to import the dump to have the same language exported in the dump and I was able to import the dump successfully.
But, I would like to use the Data Pump tool instead of the old import and export tools. How would it be possible to set the NLS parameters that "impdp" must use before to launch the import of the dump?
The NLS parameters are set to the "AMERICAN" settings in both source and destination database when I validate that with the "NLS_DATABASE_PARAMETERS" view. The dump I did with "expdp" on the source database exported the data with the "AMERICAN" settings as well...
On the destination database, the computer language is in french and I guess it is considered by the Data Pump import tool since it outputs the log in the language of the computer and it tries to do a TO_DATE with the wrong date format because it works with the "CANADIAN FRENCH" settings...
Any suggestions? I'll continue to read on my side and re-post if I find the solution.
Thanks!
Edited by: 871007 on Jul 19, 2011 8:42 AM
Edited by: 871007 on Jul 19, 2011 8:43 AM
Edited by: 871007 on Jul 19, 2011 8:43 AM

Dropping the EM repository hangs

Hello,
Im trying to recreate the database control for OEM but it hangs to the point on dropping the EM repository. heres the process goes
$ emca -config dbcontrol db -repos recreate
STARTED EMCA at Apr 24, 2007 8:25:29 PM
EM Configuration Assistant, Version 10.2.0.1.0 Production
Copyright (c) 2003, 2005, Oracle. All rights reserved.
Enter the following information:
Database SID: PRD
Database Control is already configured for the database PRD
You have chosen to configure Database Control for managing the database PRD
This will remove the existing configuration and the default settings and perform a fresh configuration
Do you wish to continue? [yes(Y)/no(N)]: Y
Listener port number: 1521
Password for SYS user:
Password for DBSNMP user:
Password for SYSMAN user:
Email address for notifications (optional):
Outgoing Mail (SMTP) server for notifications (optional):
You have specified the following settings
Database ORACLE_HOME ................ /oracle/oraprd/prddb/10.2.0
Database hostname ................ fmsdbprod.bayan
Listener port number ................ 1521
Database SID ................ PRD
Email address for notifications ...............
Outgoing Mail (SMTP) server for notifications ...............
Do you wish to continue? [yes(Y)/no(N)]: Y
Apr 24, 2007 8:26:04 PM oracle.sysman.emcp.EMConfig perform
INFO: This operation is being logged at /oracle/oraprd/prddb/10.2.0/cfgtoollogs/emca/PRD/emca_2007-04-24_08-25-29-PM.log.
Apr 24, 2007 8:26:07 PM oracle.sysman.emcp.util.PortManager isPortInUse
WARNING: Specified port 5540 is already in use.
Apr 24, 2007 8:26:07 PM oracle.sysman.emcp.util.PortManager isPortInUse
WARNING: Specified port 5520 is already in use.
Apr 24, 2007 8:26:07 PM oracle.sysman.emcp.util.PortManager isPortInUse
WARNING: Specified port 1158 is already in use.
Apr 24, 2007 8:26:07 PM oracle.sysman.emcp.util.DBControlUtil stopOMS
INFO: Stopping Database Control (this may take a while) ...
Apr 24, 2007 8:26:11 PM oracle.sysman.emcp.EMReposConfig dropRepository
INFO: Dropping the EM repository (this may take a while) ...
it stop up to here i leave it for two days but nothing happens.
Background:
Im trying to activate the OEM in a cloned environment. Since this environment is cloned the OEM instance that it gets is still the previous one.
Hope you can help me on these

Heres my procedure in bouncing the database
Shutdown includes the e-business suite application then the database
@appsprod server
su - appprd
adstpall.sh apps/apps
@fdbprod server
su - appprd
adstpall.sh apps/apps
====================================================
su - oraprd
addlnctl.sh stop PRD
addbctl.sh stop
startup FMS Prod including the e-business suite application
@dbprod server
su - oraprd
addbctl.sh start
addlnctl.sh start PRD
su - appprd
adstrtal.sh apps/apps
@appsprod server
su - appprd
adstrtal.sh apps/app
still the same output hangs on
Apr 28, 2007 12:54:38 AM oracle.sysman.emcp.EMReposConfig dropRepository
INFO: Dropping the EM repository (this may take a while) ...
whats next? sorry for the trouble. Thanks

Bulk load messages into the language repository?

Hi,
Our existing, pre-APEX, applications make use of a common table of 'messages' to provide multiple language support e.g. we have a lookup against message number and language to produce the required message.
This seems very similar to the functionality supplied through the apex_lang message repository. Is there an easy way in which we can load a modified version of our current messages into the repository without having to enter them in manually?
Thanks,
Andy

Arie Geller wrote:
Hello Andy,
>> I'm slightly(!) confused. Are you advocating using the wwv_flow_api.create_message API or manual entry? The link that you posted refers to the API as a method of message entry, I don't see a reference to exporting messages from an existing application?
Let’s go back to the beginning. As I understood, you first asked whether you can use some existing translation tables, to automatically populate the APEX translation repository. My answer was ‘no’ and I don’t think Flavio suggestions contradict it.Understood, in 'my' head the ability to create a script that would pick up my existing messages and use the 'create_message' API to load them into APEX was close enough to automatic for me! My intention is that our first move from legacy to APEX messaging would be to do this to create the base messages, and that we would consider translation later... (In some cases, I could use our existing multi-language messages to produce both the primary language and the translated messages).
Is my position more clear now? I hope so :)Thanks, much clearer, however the final step - once we have a set of base/primary and translated messages, how do we make use of them in a later application?

Recreating database where repository is located

Do to the way a database was migrated from one server to another i need to recreate a database to remove internal references to the old server. this database contains the owb repository. i am planning to take a full export, drop the database, recreate the database and do an import.
is anyone aware of any issues with this? ...i.e. dbid stored somewhere in the repository?

well...things didn't go as planned.
datapump errored out when i did a full export with the following:
ORA-39125: Worker unexpected fatal error in KUPW$WORKER.UNLOAD_METADATA while calling DBMS_METADATA.FETCH_XML_CLOB [PROCOBJ:"STRAIN"."STRAIN_OPT_INDEX_JOB"]
ORA-22813: operand value exceeds system limits
ORA-06512: at "SYS.DBMS_SYS_ERROR", line 105
ORA-06512: at "SYS.KUPW$WORKER", line 6241
----- PL/SQL Call Stack -----
object line object
handle number name
0x17adf6b50 14916 package body SYS.KUPW$WORKER
0x17adf6b50 6300 package body SYS.KUPW$WORKER
0x17adf6b50 2340 package body SYS.KUPW$WORKER
0x17adf6b50 6861 package body SYS.KUPW$WORKER
0x17adf6b50 1262 package body SYS.KUPW$WORKER
0x17adab5f0 2 anonymous block
Job "SYSTEM"."WATCH" stopped due to fatal error at 16:46:50
...i've got a tar open on this but can't proceed without a full export!
let me know how your attempt goes.
thanks.

Where is the GNUStep repository ?

Hi,
I want to install the latest version of etoile on my computer but I need the latest versions of the GNUStep libraries (that is the devloppemnt versions). I saw that there were an ArchLinux repository but the server seems unavaible.
So, I wonder is the repository moved or simply disapeared ... and what happened to the PKGBUILDs ? I don't really care about compiling GNUStep myself but I don't really want to recreate the PKGBUILDs if they already exists, partly because it takes time (to compile, fox and recompile ...) and these times I don't have much time.
Thanks.

johnisevil wrote:
mildred wrote:
Hi,
I want to install the latest version of etoile on my computer but I need the latest versions of the GNUStep libraries (that is the devloppemnt versions). I saw that there were an ArchLinux repository but the server seems unavaible.
So, I wonder is the repository moved or simply disapeared ... and what happened to the PKGBUILDs ? I don't really care about compiling GNUStep myself but I don't really want to recreate the PKGBUILDs if they already exists, partly because it takes time (to compile, fox and recompile ...) and these times I don't have much time.
Thanks.
I've gotten Etoile running fine. What I needed to do was create updated PKGBUILDs of the core GNUstep packages. There are a few other dependencies you'll need for Etoile that I've written PKGBUILDs for which you can find in AUR. You'll need onig, performance and sqlclient. I've created a PKGBUILD for Etoile itself but since it's not too useful yet and still considered unstable, I recommend installing and running it locally for your user only. Also, here's a screenshot of it showing that it does work in Arch: http://avarice.oneeightseven.org/images … inarch.png
So... this PKGBUILD, think you might be able to link it? I'd really like to give etoile a shot, but haven't had much luck compiling it.
Thanks,
aJ0

Error when starting the Integration Repository/Directory

When starting the Integration Repository or Directory I get the following error message when the Java Web Start is launched:
<i>JAR resources in JNLP file are not signed by same certificate</i>
I am running on XI3.0 SP15
Any idea?
Thanks in advance.
Kind regards,
Dave Arends

Solved this issue.
Go to Administration - Java Web Start Administration.
Click on 'Re-initialization and force signings' and start the Repository or Directory again.

Can I transfer my entire playlist from itunes to my ipad without having to recreate the playlist again?

Can I transfer my entire playlist from itunes to my ipad without having to recreate the playlist again?

Tammiev36 wrote:
It is not setting up my playlist it is just auto filling from the playlist
I do not understand. Is it filling a playlist from the songs in a different playlist?

How can I create a universe with the BO repository tables?

Hi. I need make a universe with the BO repository tables, in order to get user information .
But, when I try to insert tables in designer, using a new conecction to BO repository. I can't see tables.
Someone can help me?

The CMS repository is organized into both physical and virtual tables. Only the CMS can access the virtual tables, therefore you cannot create a universe on the CMS repository. You can access the CMS repository information through the Enterprise SDK.
https://www.sdn.sap.com/irj/boc/businessobjects-sdklibrary

Recreate the translation repository

Similar Messages

Maybe you are looking for