Recruiting - issue viewing application data

Dear experts,
We are having the PeopleSoft recruiting module installed on a 2nd DB for external users (let's call this one EXT), and the backoffice uses the 1st DB for creating job openings etc. (let's call this one REC for clarity)
Between both DBs, there's a daily data synchronization (candidate data are uploaded into REC and job opening data are uploaded into EXT).
For one of the job openings, we received a complaint from a candidate that his information for the application is not complete / correct.
Because EXT is the master in this case, I tried opening his application on EXT (through the recruiter pages Find Applicant and then "View application") but I can see the applicant itself but not his application data (i.e. I see the icon "view application" but clicking doesn't do anything at all).
I have found an example of another applicant where I can open his application data without problem so at least it seems not to be a general problem for all applicants in EXT.
It seems however that other applicants for the same job opening cannot be opened either.
I might be wrong but I concluded that the issue must be with the job opening data and I checked each and every table that is synchronized for anomalies (including job posting descriptions) and I checked existence of "supporting data" as recruiting location etc. Everything data wise seems to be ok for this job opening... I'm puzzled.
I went on checking the applicant's data and application data itself, but apart from what obviously was missing as received per mail, I could not see anything wrong with them either.
I had to refresh the job opening transaction table in the process of checking the data so that is not the issue here.
Anyone who can shed a light on this? Thanks in advance!

Hi Sridhar,
Thanks for your valauble inputs.
I did review the config and found that the PERNR is assigned. The SPRO config also looks fine.
One more thing is that our Basis Consultant is able to view and edit the details. He has superuser roles and J2EE admin roles, but as per my knowlegde these roles are not assigned to everyone.When these roles where assigned to other users they were able to view.
So looks like Business Package is also fine then what could be the reason ???
Please let me know
Cheers
YM

Similar Messages

  • I was told of an application that will allow the use of a second screen to view my data and files, but I forgot its name. I'd like to make the connection because my LCD is broken.

    I was told of an application that will allow the use of a second screen to view my data and files, but I forgot its name. I'd like to make the connection because my LCD is broken.

    You don't need an application, just plug a compaitble monitor into the display port of your MacBook Pro, set the screen up in System Preferences>Displays

  • Defining and Viewing BLOB Data in Oracle Application Express 3.2

    Hello All,
    There is a nice tutorial for working with images in Application Express 3.1 entitled "Defining and Viewing BLOB Data in Oracle Application Express 3.1". I have 3.2 and I am finding that I can't follow this tutorial... Is there any similar how to for 3.2?
    Thank you,
    Daniel

    Hi,
    I have just gone through the first steps in my OTN workspace app, and I do get the Implementation option (showing Interactive or Classic). In fact, my page at this point matches exactly the image shown in the tutorial.
    My OTN workspace app uses Apex version 3.2. The Interactive reports are relatively new, so older versions of Apex would not have this option. But you say that you are using version 3.2? If you just try to create a report page on, say, EMP, do you get the option to select Interactive or Classic?
    Andy

  • Issue in viewing the data

    Hi All,
    We are working on EP 6 and ECC 6 and facing a problem of viewing the data.
    For Ex :
    When we log in to the portal and click on any of the hyperlinks provided for example Who's Who or in Personnel Information => Address ..the link dosen't work or open at all neither we get any errors.
    We have assigned all the roles required for the User and also in IT 0105 subtype 0001 is mainted.
    Request you all to let me know reasons
    Thanks for all your support.
    Thanks
    YM

    Hi Sridhar,
    Thanks for your valauble inputs.
    I did review the config and found that the PERNR is assigned. The SPRO config also looks fine.
    One more thing is that our Basis Consultant is able to view and edit the details. He has superuser roles and J2EE admin roles, but as per my knowlegde these roles are not assigned to everyone.When these roles where assigned to other users they were able to view.
    So looks like Business Package is also fine then what could be the reason ???
    Please let me know
    Cheers
    YM

  • Issue while using views in Data services Jobs

    Hi,
    In Data Services Job, i am trying to pull data from a view to a table. The view is pointing to the table which is in other database.
    The problem is when i import the source view into data services and view the data, i found one row having wrong data. The values in that row are wrong/corrupted while the same row in the source table is having correct values
    I queried the view from TOAD for that record. The values are valid.
    The data is coming wrong only in Data services. Any row in that table gets corrupted, there is no specific row.
    Hence while running the jobs i am getting errors.
    Any idea what can be the reason of getting corrupted data in view while same view when queried from TOAD gives correct values?

    hi,
    There is a possibility of unsupported data type by data service, please share the data service version,  database type and data type of column which got corrupted.
    Regards,
    M Ramesh

  • Different Text Size for different mobile devices and Tabbed View Application

    Hi,
    I am developing an sample mobile application to target all mobile devices (IPhone/IPad/IPod and Android).
    I am facing an Issue that i am using default text size for the TextInput, TextArea and label but text size look so small for some devices, i discuss this with some(unkown) person(he is an IPhone developer).
    He told me that in Iphone development for different devices they use different text size.
    So how would I do the same at our Flex Mobile application ?
    Please provide me help regarding this
    There is one more problem in the application. I have tabbed view application, and i assign the firstview of the tab after 10 or more seconds of interval so that data will load in the application properly.
    But issue is that my first tab is not show anything at first go. When we switch the tab then it loads the screen and application work fine.
    Please provide me any help so that i can see the first Tab Screen.
    Thanks

    Hi there. For your font issue you need to set up a variable call it var fontSize or something. Then have an if statement that reads something like if (stage.stageWidth <= 320) fontSize=8 else if (stage.stageWidth > 320 || stage.stageWidth <= 640) fontSize = 12.
    Then instead of giving your font a size give it the size of fontSize variable and it will check for stage width or whatever you base it on and apply that size to your text field.
    I had done this for an app I did for Kellogg Garden Products but if you notice when you go from portrait to landscape mode the font size increases using this technique.
    http://itunes.apple.com/us/app/kellogg-garden-products-soil/id440522636?mt=8

  • How to view UTF8 data

    I have written a java application to store the UTF8 data into the database. When I use the browser to insert the data and view the data, it's ok.
    However, after I used the browser to insert the data, I cannot view the UTF8 data using SQLPLUS, although I have set the NLS_LANG in the registry to AMERICAN_AMERICA.UTF8
    (rubbish code came out)
    Do anyone know how to view the UTF8 data (not using browser)?

    This is because to view Unicode you need to be using a Unicode enabled application. Internet Browser is Unicode enabled.
    SQL*Plus is what we call an Ansi code page program. It can only support the native character set of your operating system. For example, when running on standard English MS Windows, the character set is WE8MSWIN1252. So SQL*PLUS running on English Windows will only display the 251 characters defined by this character set.
    I believe on certain UNIX platforms (say Solaris) you can change the OS character set to UTF8, in that case SQL*Plus on that platform will be able to interpret and display all the UTF8 characters, assuming that you have the Unicode font installed.
    Oracle Forms is a Unicode enable application, by setting NLS_LANG character set to UTF8, it should be able to display your UTF8 data.
    Two other options for you, however both requiring internet browser supoprt.
    1. Use iSQL*Plus , this is the broswer based version of SQL*Plus, it supports UTF8. This is the one I recommend.
    2. If you just need to view your data, you can set your client NLS_LANG character set to UTF8; Launch SQL*Plus and SPOOL out the output into a text file. Open the text file in a browser but make sure the browser encoding is set to UTF8.
    BTW, there is a separate Globalization Support and NLS discussion forum on OTN for NLS related issues.

  • When will Reader 9's Runtime error for redirected Application Data be fixed??

    Has anyone heard when Adobe will fix Reader 9's Runtime error for redirected Application Data??  It's still happening with 9.1.3 for only users who have their Application Data folder redirected via Group Policy.
    It's been going on for some time, as evidenced by the following link, and my own personal pain fighting this
    http://forums.adobe.com/thread/391738?start=100&tstart=0

    Also posted here: http://forums.adobe.com/thread/391738
    I haven't read through all of the posts, but the general consensus I have is that the issue is in fact related to the redir
    ection of the Application Data folder. The main issue being that the use of a UNC path causes the error described, with some mention to explicit user permissions on the root of the folder path.
    I was just recently made aware of this issue in our environment. Apparently we've held off upgrading to Adobe 9.x because of this issue. After a little research, it was apparent that simply modifying the default Folder Redirection policies is not possible because the use of a mapped drive is not supported.
    I haven't had a chance to test this yet, and may not be able to for some time, so I thought I would share this in case someone else might be able to test. The idea being to simply use a custom ADM file to force the redirection of certain profile folders. Again, I haven't tested this using a mapped drive in the path, but I have successfully used the same settings below to redirect other folders not available by default in Group Policy.
    1) Copy the text between ----- Start of ADM ------ and ----- End of ADM ------ and paste it into a text file.
    2) Rename the .txt to .adm.
    3) Load the ADM template into a GPO.
    4) Right click "USER Custom Settings", select "View", select "Filtering" and uncheck the option "Only show policy settings that can be fully managed".
    5) Configure the "Redirect Application Data" option as enabled, and enter a mapped drive path.
    6) Test.
    I'm interested to hear if this is a viable solution or not.
    ------ Start of ADM -----
    CLASS USER
          CATEGORY "USER Custom Settings"
                CATEGORY "Folder Redirection Settings"
                      POLICY "Redirect My Documents"
                      EXPLAIN "By default files are stored as part of the
    user's profile.\n\nConfigure alternative locations here."
                      KEYNAME
    "Software\Microsoft\Windows\CurrentVersion\Explorer\User Shell Folders"
                      PART "Redirect to" EDITTEXT
                            VALUENAME "Personal"
                            MAXLEN 255
                            DEFAULT ""
                            EXPANDABLETEXT
                      END PART
                      END POLICY ; RedirectHistory
                      POLICY "Redirect Application Data"
                      KEYNAME
    "Software\Microsoft\Windows\CurrentVersion\Explorer\User Shell Folders"
                      EXPLAIN "By default files are stored as part of the
    user's profile.\n\nConfigure alternative locations here."
                      PART "Redirect to" EDITTEXT
                            VALUENAME "AppData"
                            MAXLEN 255
                            DEFAULT ""
                            EXPANDABLETEXT
                      END PART
                      END POLICY ; RedirectHistory
                      POLICY "Redirect Cookies"
                      KEYNAME
    "Software\Microsoft\Windows\CurrentVersion\Explorer\User Shell Folders"
                      EXPLAIN "By default files are stored as part of the
    user's profile.\n\nConfigure alternative locations here."
                      PART "Redirect to" EDITTEXT
                            VALUENAME "Cookies"
                            MAXLEN 255
                            DEFAULT ""
                            EXPANDABLETEXT
                      END PART
                      END POLICY ; RedirectCookies
                      POLICY "Redirect Favorites"
                      KEYNAME
    "Software\Microsoft\Windows\CurrentVersion\Explorer\User Shell Folders"
                      EXPLAIN "By default files are stored as part of the
    user's profile.\n\nConfigure alternative locations here."
                      PART "Redirect to" EDITTEXT
                            VALUENAME "Favorites"
                            MAXLEN 255
                            DEFAULT ""
                            EXPANDABLETEXT
                      END PART
                      END POLICY ; RedirectFavorites
                      POLICY "Redirect History"
                      KEYNAME
    "Software\Microsoft\Windows\CurrentVersion\Explorer\User Shell Folders"
                      EXPLAIN "By default files are stored as part of the
    user's profile.\n\nConfigure alternative locations here."
                      PART "Redirect to" EDITTEXT
                            VALUENAME "History"
                            MAXLEN 255
                            DEFAULT ""
                            EXPANDABLETEXT
                      END PART
                      END POLICY ; RedirectHistory
                      POLICY "Redirect Recent Documents"
                      KEYNAME
    "Software\Microsoft\Windows\CurrentVersion\Explorer\User Shell Folders"
                      EXPLAIN "By default files are stored as part of the
    user's profile.\n\nConfigure alternative locations here."
                      PART "Redirect to" EDITTEXT
                            VALUENAME "Recent"
                            MAXLEN 255
                            DEFAULT ""
                            EXPANDABLETEXT
                      END PART
                      END POLICY ; RedirectRecent
                END CATEGORY
          END CATEGORY
    ------ END of ADM -----

  • ESET NOD 32 cannot scan past this point. I keep getting stuck at 56% at the following; C:\Documents and Settings\Owner\Application Data\ Mozilla\Firefox\Crash Reports\Pending. Is this a problem with NOD32 or with Firefox? Thank you.

    I ran into a glitch on my system that I tried to fix myself. My NOD32 was always showing the yellow warning circle as my protection status when I started my computer. I tried to fix this every way I new how.
    Then I started to get pop ups asking me to fix and then send system error reports to Windows. Some stating they were '''''critical.''''' So I sent NOD32 the e-mail below.
    '''Me:''' I cannot seem to run a complete system scan. I keep getting stuck at 56% at the following point. C:\Documents and Settings\Owner\Application Data\
    Mozilla\Firefox\Crash Reports\Pending
    I also keep getting messages to send error reports to Microsoft constantly. I also have this code C:\pagefile.sys-error opening
    Thank you for your assistance.
    '''Their solution:'''
    Based on the information you provided, we recommend that you upgrade to latest version of ESET NOD32 Antivirus and see if this makes a difference.
    Please click or copy/paste the following ESET Knowledgebase article into your web browser for step-by-step instructions:
    '''Me''' : I did as they requested and am fully upgraded and licensed with their new edition.
    Ran a new scan same problem.
    I sent them a new e-mail but now wonder if it is a Firefox issue as, C:\Documents and Settings\Owner\Application Data\
    ''Mozilla\Firefox\Crash Reports\Pending'' this is where the scan stalls.
    Any help would be appreciated.
    Thank you.

    Try delete the files in Pending folder and make the scan again, do not be afraid to delete the files see : https://support.mozilla.org/en-US/questions/679996
    thank you
    Please mark "Solved" the answer that really solve the problem, to help others with a similar problem.

  • ICal day view header date error

    I'm having an issue with the date header in the iCal day view.  No matter what day I select the calendar displays Saturday, November 27th, 2010 in the header (at the right top corner of the screen).  The date near the top of the agenda on the left side of the screen is displaying correctly and changes as I change to different dates.  Also the icon in the dock is displaying correctly.
    I've tried various basic things such as quitting and restarting iCal.  Also I've reviewed the preferences for iCal as well as the system preferences and haven't seen anything that would make a difference.
    Any assistance or thoughts would be greatly appreciated.  Thank you.

    Eyejinx,
    Quit Calendar, and go to System Preferences....>Language & Text>...and set/re-set your "Region:" Restart Calendar.
    If that is not successful, quit Calendar again, and paste this text ~/Library into the Finder Menu>Go>Go to Folder...window and select "Go." This will open the Users Library Folder.
    Next open the Preferences Folder in that Library Folder and move the com.apple.iCal.plist file to the Desktop.
    Log out/in or restart and open Calendar.

  • I can view the data in front end form, but data is not avilable in backend

    Hi,
    i created a form with three blocks.In first block i entered the data.Based on the data it will fetch recodrs from A & B tables and insert into C table.This logic i have written in backend and put commit in front end and back end. In the 2nd block iam using C table. i can view the data in front end(C table) . But i unable to
    see the data in C table when i go and see in back end.
    Form is used for only querying purpose. for the C block insert allowed and update allowed is false.
    Plz do the need ful

    Please try and post sufficient information for someone to replicate your problem. We are not looking over your shoulder and do not have access to your database.
    We need a minimum table structure, example data, a walk-through of how the form works - you mention 3 blocks and only half-way describe 1. Is another for the C block? Or is that a different form?
    e.g. Enter search data in Block A. Execute Query. Blocks A and B populated with data from database tables based on FK relationship B to A. User presses Save button, procedure in form updates table C based on data in form and issues commit. Execute Query in Block C retrieves just inserted data in table C.
    Is that remotely what's happening? Or something completely different?

  • View application pages - view forms views and application pages. enumerate lists

    view application pages - view forms views and application pages. enumerate lists, if we disable this permission in sharepoint then user gets blocked from getting into application pages which is good. But now I have few list view web parts on a page and user
    is not able to see those reports based on view. It shows working on it. As soon as I enable view application pages permission it works.
    I need a permission level -view forms views only.
    MCTS Sharepoint 2010, MCAD dotnet, MCPDEA, SharePoint Lead

    Hi Amit,
    SharePoint has a feature called “ViewFormPagesLockDown” at site collection scope. After enabling the feature, all groups / users not having the “View Application Pages” permission will not be able to navigate to pages like “_layouts/viewlsts.aspx”
    or “pages/forms/allitems.aspx”.
    So, for your issue, please disable the ViewFormPagesLockDown feature via PowerShell command:
    $lockdownFeature = get-spfeature viewformpageslockdown
    disable-spfeature $lockdownFeature -url [the URL of your site]
    More information:
    http://sharepointtechie.blogspot.jp/2011/06/blocking-access-to-application-pages.html
    http://sureshpydi.blogspot.jp/2013/12/viewformpageslockdown-feature-in.html
    Best Regards,
    Wendy
    Forum Support
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
    [email protected]
    Wendy Li
    TechNet Community Support

  • How To Restrict View of Data Per User

    I am designing a reporting application in Discoverer, from Oracle Applications data. We need to show sales data to the sales people - and we would like a single Discoverer workbook to do this - the challenge is that we need to restrict the data so that the salesperson only sees his/her own data, and cannot view other sales data.
    I will need to use this same methodology for the sales managers. Each sales manager will only be able to see his/her direct reports' sales data.
    How would you design this? Could we use a single Discoverer workbook for all sales people - and there be row-level security to restrict the current users' search results?
    Thank you,
    Rich Magee
    Greenwich, CT

    Yes Rich. We have only one workbook for all the stores in our case. You can create mapping table like this
    Table Name: usermapping
    username salesrepid
    john 10
    michelle 20
    If you are using your own tables/views for your reports create a repid column in them and populate accordingly.Assuming that your custom tables is like this
    Table Name: RepInfo
    line# salesrepid region product amount
    1 10 NE S/W 1000.00
    2 20 SW H/W 500.00
    Create a function like this
    CREATE OR REPLACE FUNCTION setparam (name VARCHAR2)
    RETURN NUMBER
    IS
    BEGIN
    /* Setting the session client information to the value of parameter so that this can be accessed
    by the custom folder in the admin edition */
    dbms_application_info.set_client_info(name);
    RETURN 1;
    END;
    Create a custom folder like
    select a.region,a.product,a.amount
    from
    repinfo a,
    usermapping b
    where
    a.salesrepid = b.salesrepid
    and b.username = USERENV('CLIENT_INFO') --gets the username from the above function which sets the username for the database session.
    The input to above function which is username would be passed from report using a calculation item.You can create a calculation item and select the function setparam and give the input to it 'USER' variable which is gives the username of the current session.
    The workbooks passes the username to function and custom folder would get the username from the function.This approach would allow you to pass the username dynamically and use the same report for all the rep's. I'vent tried VPD concept till now.
    Hope this helps.
    Thanks
    Raj

  • SBS 2011 VM and Server 2012 R2 Hyper-V host. After rebuilding the host image, no email is received, EMC states "You don't have sufficient permissions to view this data" when looking at organization config. Server config not shown on EMC.

    Hyper-V Host Server 2012 R2 x64 drive c:
    All VMs, including SBS 2011 Standard x64 are on drive d:
    I replaced my motherboard and defined a Marvell RAID 1 Mirror for my boot drive C:.  My drive D: containing all of my Hyper V machines remained untouched since the new MB had Intel Matrix Controller with RAID 5, as did the old MB.
    Since the C: drives are a few bytes smaller after configured as a RAID 1, I was unable to restore drive C from the image copy, so I rebuilt a new Hyper-V Host identical as possible using Server 2012 R2 x64.  I had to redefine the Hyper-V machines on
    the host, and the 1st time I brought it all (host and VMs) I had to reconfigure the NICs due to new MAC addresses, and verifying SBS 2011 DNS and DHCP for all physical and Hyper-V machines. Otherwise my Hyper-V SBS 2011 x(64) wasn't touched.
    Now the SBS Exchange 2010 is not receiving mail.  In the Exchange Management Console clicking on the Organization config gives me a highlighted error "You don't have sufficient permissions to view this data".  The Server
    Config is no longer on the EMC.  The Recipient Config looks fine.
    Outlook 2013 x64 connects to the Exchange Server, but no new mail appeared.  There were just a few older messages that came in since the last time I opened Outlook.  My public DNS on GoDaddy was not changed.  I did not change sending mail
    through my ISP Sonic.net.  The SBS internal DNS doesn't have an MX record, but I'm not sure it ever did since my GoDaddy public DNS has an MX record.
    I tried restoring to an earlier Image Copy, but that made no difference.  I'm using the Windows Backup from SBS 2011 for my daily image copy backups.
    - Michael Faklis

    Hi Michael,
    à
    After more research and running the Best Practices report from the EMC, I am missing a slew of ManagementRolesAndRoleGroups from the RBAC container.
    Based on your description, it seems that you have find the cause of this issue. On current situation, I still
    suggest that you should run
    SBS 2011 BPA and then check if can find some relevant errors. Just for a confirmation.
    Meanwhile, please refer to following articles and check if can help you.
    Apply
    missing Exchange 2010 RBAC Management Roles and Policies
    RBAC Manager
    (Exchange 2010 SP2)
    Hope this helps.
    Best regards,
    Justin Gu

  • Import tracks in album order when viewing by Date Added

    I've seen some older posts regarding this, but nothing recently. Here's my issue, and I can't believe more people aren't up in arms about it:
    I keep iTunes sorted by Date Added, so that my latest stuff is at the top -- pretty normal for a music listener, right?
    Say I have a folder of mp3s and I drag them into iTunes. For a long time in years past, even though you're dragging the entire album in, they would just get added in the order that iTunes wanted, rather than in album order. Then, at some point recently, I assume after an update to iTunes (?), they magically started being added in the correct order. I was really happy about this, as the random order entire albums were added in was extremely annoying.
    Now something's happened and the old behavior is back.
    Does anyone know how to drag an album's worth of mp3s into iTunes and have iTunes load them in in *album* order, so that when you view by Date Added, they show your album as it would look on the back of a cd or whatever, in the correct order?

    This won't directly answer your question, but I find that if I make a playlist of the album, then they appear in the correct order in that playlist.

Maybe you are looking for

  • SOAP Fault when returning null from a Native Web Service Stored Procedure

    I have a stored procedure which I can successfully invoke via soapUI However, if one of the Stored Procedure's OUT arguments is set to null the native web service returns the following fault : <soap:Envelope xmlns:soap="http://schemas.xmlsoap.org/soa

  • How can I get iMessage on my Mac OS X

    My mac is a Mac OS X version 10.6.8 processor: 2.2 GHz intel core 2 duo why cant i find imessage on my laptop? how can i get it?

  • Mfr No. and Serial Number

    Hi, I have an item that is managed by serial numbers. In the Goods Receipt PO form, I have included the two columns "Mfr. No." and "Serial No." using the form settings. And, I have entered the Mfr. No. and Serial No. for the item, under these two col

  • Why can't I share my iMovie?

    I just made my first video. After awhile I realized I had run out of memory to edit footage. So, I just grabbed the video directly from my memory card. Now after days of work, I can't share it. It says, "This item cannot be shared while it is still r

  • Is the version of Illustrator CS6 installed the same as the one included with the Creative Cloud?

    I have been using AI CS6 on a mac 10.8.2, since it came out. I recently updated to Crative Cloud. Adobe download manager says AI is installed. So I assume the version I have been using is the same one you download in Creative Cloud?