Recurring issue with mobile upload

Hi all,
Using Lightroom 5.6, I am experiencing ongoing issues with synchronising (uploading) LR to mobile devices. In brief, the upload will typically fail in mid-session with some collections partially or fully uploaded and some not started. (This may initially have been caused by going off-line during an upload), It will not recover. Deleting all uploaded data to prompt a restart does not help - it does not restart either.
Previously I have had to contact support and send the diagnostic report. Apparently there is a flag on the server end that needs resetting. Not the most satisfactory of solutions as it requires an action outwith the users control, but it does / did reset the file transfer interface. Apparently this bug was scheduled for fixing in the next up date. I understand I am on the latest (5.6) version , so does anyone know if this is still a bug?
Meantime, can support please reset my connection?
Regards .... Alastair

Hi Alastair,
I've contacted you privately.
Thanks,
Ignacio

Similar Messages

Adobe Reader X:Recurring issues with print and save requiring reinstalls

One of our staff has recurring issues with PDF print, view, save. These issue are temporarily resolved by re-installing the Reader from the Adobe website. No error messages are displayed - the functions just cease to work. In the most recent iteration of the issue a document attached to an email could be saved (right mouse click, save as) within the email program but not within the Reader itself.
It appears that Reader is getting corrupted - but by what? This individual does a lot of downloading of web published PDFs - a possible source but one I can't confirm.
Information on a permanent resolution or known cause would be greatly appreciated.

Thanks v much Twilight - once I had posted the question I saw the same issues were posted by another.
I'll try the print as image under the advanced print tab and see how I get on with that. Hopefully Adobe will bring out a fix soon.
Thanks again.
Cattswood

Issues with file upload in flex mobile application (sharepoint as backend)

Hello,
I am working on flex mobile application for android platform for which we are having sharepoint as a backend.
(Flex SDK 4.6 and AIR 3.9)
Issue which we are facing is as follows:
We are communicating with the backend server using webservices: example:
<s:WebService id="kWebService" wsdl="http://www.kservice.net/kdatabaseservice.asmx?WSDL" >
            <s:operation name="AddPost"
                         resultFormat="object"
                         result="addPostResult(event)"
                         fault="postsfaulterr(event)" />
</s:WebService>
Above services are working fine but we are facing issue with one service which is related to file upload.
File upload for <10 MB is working fine but when we try to upload larger file on server it fails to process.
We are sending bytearray to the backend and backend code is writing those bytearray into file.
We have tried many ways to overcome from this situation. like we have checked configuration for file upload size on server , we have tried wcf services as well. Please help us on this criticle point as soon as possible
Thanks
Dhwani

Prashant8809 wrote:
Hi
>
> I have already gone through the video by Thomas Jung for multiple file upload but it saves the contents in server and not in >transparent table. So please suggest me alternative solutions.
>
>
> Regards
> Prashant Chauhan
What do you mean that my video saves the contents int he server and not in transparent table? I save the data into a temporary database table so it can be accessed by the parent WDA session. From there the WDA session can do whatever it wants with it. What do you mean by transparent table - that would be a database table. Do you actually mean internal table? if so, just read the data from the temporary database table into memory.

Issues with Mobile Broadband on the Tablet 2

Is anyone having slowing degrading connection issues with Vodafone and the Tablet 2. Upon fresh boot, signal is strong, then degrades until a reboot is required. Seems very odd. Other devices connecting to vodafone at the same location have no problems.

hi rogerf.
due to it was working before, i can say there's no compatible issue with the device and computer.
you may need to contact ericsson or the mobile provider in aussie. still, there may be users here who has/had the same issue. you can wait for reply.

Issue with Image upload in DAM (changes the size)

Hi,
We are seeing issues with some of the .jpeg files dimensions getting chnaged when uploaded into CQ5.4. For e.g. I have an W-Training-Shoes-hotspot-1b-140x140.2.jpeg of140x140 dimension. When I upload it in CQ it saves with width=1600 & height=140. Did anybody saw this issue before?
If I copy the original file & resave it with 140x140 size & reload in CQ, it will load fine with width=140 & height=140.

It looks like the assets has wrong metadata. As a workaround add a process step right after "Metadata extraction" to the update asset workflow and have a script updates with correct dimensions.

Recent issues with mobile safari

What the heck is going on with mobile safari !?! Super slow on loading most anything, have to refresh the page to finish loading it and can't like or comment on facebook either

I think your problem is your network connection. Are you using cellular data or Wifi when you notice the slowness?
I suggest you reset your net work connections.

Issues with mobility and autodiscovery with Lync 2013 and IIS/ARR

Hi all,
this is my last resort after days and days searching a solution for this problem... unsuccessfully.
All works fine unless the autodiscovery service with external users and the mobility service for both internal and external ones.
I deployed a Standard Edition Lync Server 2013 with:
a consolidated Frontend server in LAN
an Archiving and Monitoring server in LAN
an Edge server in DMZ with 2 NICs (one in DMZ network and one in LAN)
a IIS/ARR 2.5 reverse proxy in DMZ with 2 NICs (one in DMZ network and one in LAN)
All these roles are on Windows Server 2012 R2.
No split-DNS is deployed since I have different domains for internal and external. In any case I used the pinpoint DNS tip to resolve some records internally (I followed this guide http://tsoorad.blogspot.ch/2012/10/lync-server-dns-pinpoint-zones.html)
Here DNS records into internal domain:
A-record for meet.domain-ext.com points to Frontend server local IP
A-record for dialin.domain-ext.com points to Frontend server local IP
A-record for lyncdiscoverinternal.domain-ext.com points to Frontend server IP
A-record for lyncwebexternal.domain-ext.com points to Frontend sever local IP
A-record for autodiscover.domain-ext.com points to Exchange server local IP
Here DNS records into external domain:
CNAME-record for lyncdiscover.domain-ext.com points to lyncwebexternal.domain-ext.com
CNAME-record for sipexternal.domain-ext.com points to lyncwebexternal.domain-ext.com
A-record for meet.domain-ext.com points to Reverse Proxy public IP
A-record for dialin.domain-ext.com points to Reverse Proxy public IP
A-record for lyncwebexternal.domain-ext.com points to Reverse Proxy public IP
I installed and configured IIS/ARR 2.5 with KB2732764 and KB2785586 on Reverse Proxy following the NextHop guide. The local IP address of external NIC on Reverse Proxy is NATTED by a Cisco ASA firewall with public IP address and only 80/443
ports are permitted.
The problems occurs when I try to connect whit my Lync 2013 APP on iPad using autodiscovery service, both internally and externally. After some seconds the APP shows the message “Cannot connect to the server because it could be busy or
temporarily unavailable. Retry.” When I used the IIS/ARR 3.0 the problem looked like an authentication issue, then I came back to ISS/ARR 2.5 version with its KB. Now I cannot understand what is the cause about logfail.
The same behavior occurs with Android Lync 2013 APP and Windows Phone 8 APP.
Moreover my Lync 2013 client on Windows 7 can connect internally with autodiscovery settings but it cannot do it externally.
I'm a bit confused because I cannot understand if the problem is about external webservice of Frontend server or about Reverse Proxy configuration or about Lync Control Panel configuration.
Here is an extracted of iPad Lync 2013 log (sorry if it’s a bit long).
Any helps are very appreciated, thansk a lot!
</SentRequest>
2013-12-20
11:33:00.781 Lync[563:3a71018c] INFO APPLICATION
CUrlRedirectAndTrustResolver.cpp/201:CUrlRedirectAndTrustResolver::processUrl
called with url = http://lyncdiscover.domain-ext.com/, hopCount = 0, maxHops =
10
2013-12-20
11:33:00.781 Lync[563:6d00000] INFO UTILITIES
CHttpStreamPool.cpp/409:Allocating stream 0x11cbe40 for url -
https://lyncdiscover.domain-ext.com/ with persistent id as 6
2013-12-20
11:33:00.782 Lync[563:3a71018c] INFO TRANSPORT CTransportThread.cpp/131:Added
Request(UcwaAutoDiscoveryRequest) to Request Processor queue
2013-12-20
11:33:00.782 Lync[563:6d00000] VERBOSE TRANSPORT
CHttpProxyHelper.cpp/436:CHttpProxyHelper::discoverProxy : No proxy found for
url https://lyncdiscover.domain-ext.com/?sipuri=sip:[email protected].
Sending over direct connection.
2013-12-20
11:33:00.782 Lync[563:3a71018c] INFO APPLICATION
CTransportRequestRetrialQueue.cpp/385:Submitting new req.
UrlTrustResolver(0x1201358)
2013-12-20
11:33:00.782 Lync[563:3a71018c] INFO APPLICATION
CUcwaAutoDiscoveryService.cpp/1783:Successfully started the GetUserUrlOperation
request for http://lyncdiscover.domain-ext.com/?sipuri=sip:[email protected]
2013-12-20
11:33:00.796 Lync[563:6d00000] INFO TRANSPORT CTransportThread.cpp/343:Sent
Request(UcwaAutoDiscoveryRequest) to Request Processor
2013-12-20
11:33:00.796 Lync[563:6d00000] WARNING TRANSPORT
CCredentialManager.cpp/317:CCredentialManager::getSpecificCredential returning
NULL credential for serviceId (4) type (1)!
2013-12-20
11:33:00.797 Lync[563:6d00000] INFO TRANSPORT
TransportUtilityFunctions.cpp/631:<SentRequest>
GET
http://lyncdiscover.domain-ext.com/
Request Id:
0x1201358
HttpHeader:Accept
application/vnd.microsoft.rtc.autodiscover+xml;v=1
</SentRequest>
2013-12-20
11:33:00.797 Lync[563:6d00000] INFO UTILITIES
CHttpStreamPool.cpp/409:Allocating stream 0x12028f0 for url -
http://lyncdiscover.domain-ext.com/ with persistent id as 7
2013-12-20
11:33:00.798 Lync[563:6d00000] VERBOSE TRANSPORT
CHttpProxyHelper.cpp/436:CHttpProxyHelper::discoverProxy : No proxy found for
url http://lyncdiscover.domain-ext.com/. Sending over direct connection.
2013-12-20
11:33:00.798 Lync[563:6d00000] INFO TRANSPORT CHttpStreamPool.cpp/556:Not
setting TLS as the url(http://lyncdiscover.domain-ext.com/) is not https
2013-12-20
11:33:00.812 Lync[563:3a71018c] INFO UI CMConversationCommon.mm/43:not signed
in
2013-12-20
11:33:00.812 Lync[563:3a71018c] INFO UI CMConversationCommon.mm/43:not signed
in
2013-12-20
11:33:00.812 Lync[563:3a71018c] INFO UI CMConversationCommon.mm/43:not signed
in
2013-12-20
11:33:00.813 Lync[563:3a71018c] INFO UI CMConversationCommon.mm/43:not signed
in
2013-12-20
11:33:00.813 Lync[563:3a71018c] INFO UI CMConversationCommon.mm/43:not signed
in
2013-12-20
11:33:04.104 Lync[563:6d00000] INFO UTILITIES CHttpConnection.cpp/577:Received
kCFStreamEventEndEncountered (UcwaAutoDiscoveryRequest)isHeadersAvailable =
true responseHeadersHandle = 12c5d70
2013-12-20
11:33:04.105 Lync[563:6d00000] INFO UTILITIES CHttpConnection.cpp/628:Response
status = 200 for request UcwaAutoDiscoveryRequest
2013-12-20
11:33:04.105 Lync[563:6d00000] INFO UTILITIES
CHttpStreamPool.cpp/455:Scheduling stream 0x12028f0 for release.
2013-12-20
11:33:04.105 Lync[563:6d00000] INFO TRANSPORT
CHttpRequestProcessor.cpp/173:Received response of
request(UcwaAutoDiscoveryRequest) with status = 0x0
2013-12-20
11:33:04.106 Lync[563:6d00000] INFO TRANSPORT
TransportUtilityFunctions.cpp/925:<ReceivedResponse>
GET
http://lyncdiscover.domain-ext.com/
Request Id:
0x1201358
HttpHeader:Cache-Control
no-cache
HttpHeader:Content-Length
1076
HttpHeader:Content-Type
application/vnd.microsoft.rtc.autodiscover+xml; v=1
HttpHeader:Date
Fri, 20 Dec 2013 10:33:02 GMT
HttpHeader:Expires
-1
HttpHeader:Pragma
no-cache
HttpHeader:Server
Microsoft-IIS/8.5
HttpHeader:StatusCode
200
HttpHeader:X-AspNet-Version
4.0.30319
HttpHeader:X-Content-Type-Options
nosniff
HttpHeader:X-MS-Server-Fqdn
frontend-lync.domain-int.com
HttpHeader:X-Powered-By
ASP.NET, ARR/2.5
Ôªø<?xml
version="1.0" encoding="utf-8"?><AutodiscoverResponse
xmlns:xsd="http://www.w3.org/2001/XMLSchema"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
AccessLocation="Internal"><Root><Link
token="Domain" href="https://frontend-lync.domain-int.com/Autodiscover/AutodiscoverService.svc/root/domain?originalDomain=domain-ext.com"
/><Link token="User" href="https://frontend-lync.domain-int.com/Autodiscover/AutodiscoverService.svc/root/user?originalDomain=domain-ext.com"
/><Link token="Self" href="https://frontend-lync.domain-int.com/Autodiscover/AutodiscoverService.svc/root?originalDomain=domain-ext.com"
/><Link token="OAuth" href="https://frontend-lync.domain-int.com/Autodiscover/AutodiscoverService.svc/root/oauth/user?originalDomain=domain-ext.com"
/><Link token="External/XFrame"
href="https://lyncwebexternal.domain-ext.com/Autodiscover/XFrame/XFrame.html"
/><Link token="Internal/XFrame" href="https://frontend-lync.domain-int.com/Autodiscover/XFrame/XFrame.html"
/><Link token="XFrame" href="https://lyncwebexternal.domain-ext.com/Autodiscover/XFrame/XFrame.html"
/></Root></AutodiscoverResponse>
</ReceivedResponse>
2013-12-20
11:33:04.108 Lync[563:6d00000] INFO TRANSPORT
CUcwaAutoDiscoveryResponse.cpp/112:location value is internal
2013-12-20
11:33:04.108 Lync[563:6d00000] INFO TRANSPORT
CUcwaAutoDiscoveryResponse.cpp/195:User url is https://frontend-lync.domain-int.com/autodiscover/autodiscoverservice.svc/root/user?originaldomain=domain-ext.com
2013-12-20
11:33:04.109 Lync[563:6d00000] INFO TRANSPORT
CHttpRequestProcessor.cpp/266:Sending event to main thread for
request(0x1201358)
2013-12-20
11:33:04.109 Lync[563:3a71018c] INFO APPLICATION
CTransportRequestRetrialQueue.cpp/822:Req. completed, Stopping timer.
2013-12-20
11:33:04.109 Lync[563:3a71018c] INFO APPLICATION
CUrlRedirectAndTrustResolver.cpp/610:UrlRedirectAndTrustResolver complete with
url = http://lyncdiscover.domain-ext.com/, Hops = 1, status = S_OK (S0-0-0)
2013-12-20
11:33:04.109 Lync[563:3a71018c] INFO APPLICATION
CTransportRequestRetrialQueue.cpp/725:Response received for req.
UrlTrustResolver(0x1201358): S_OK (S0-0-0) (Success); Done with req.; Stopping
resend timer
2013-12-20
11:33:04.110 Lync[563:3a71018c] INFO APPLICATION
CUcwaAutoDiscoveryGetUserUrlOperation.cpp/393:CUcwaAutoDiscoverGetUserUrlOperation::onEvent
received. Status = S_OK (S0-0-0), url =
http://lyncdiscover.domain-ext.com/
2013-12-20
11:33:04.110 Lync[563:3a71018c] INFO APPLICATION
CUcwaAutoDiscoveryGetUserUrlOperation.cpp/449:Received a root response
2013-12-20
11:33:04.110 Lync[563:3a71018c] INFO APPLICATION
CUcwaAutoDiscoveryGetUserUrlOperation.cpp/456:Running trust check on user url.
url = https://frontend-lync.domain-int.com/autodiscover/autodiscoverservice.svc/root/user?originaldomain=domain-ext.com
2013-12-20
11:33:04.110 Lync[563:3a71018c] INFO APPLICATION
CUrlRedirectAndTrustResolver.cpp/77:Starting CUrlRedirectAndTrustResolver with
url = https://frontend-lync.domain-int.com/autodiscover/autodiscoverservice.svc/root/user?originaldomain=domain-ext.com,
maxHops = 1
2013-12-20
11:33:04.110 Lync[563:3a71018c] INFO APPLICATION
CUrlRedirectAndTrustResolver.cpp/201:CUrlRedirectAndTrustResolver::processUrl
called with url = https://frontend-lync.domain-int.com/autodiscover/autodiscoverservice.svc/root/user,
hopCount = 0, maxHops = 1
2013-12-20
11:33:04.111 Lync[563:3a71018c] INFO TRANSPORT CTransportThread.cpp/131:Added
Request(UcwaAutoDiscoveryRequest) to Request Processor queue
2013-12-20
11:33:04.111 Lync[563:3a71018c] INFO APPLICATION
CTransportRequestRetrialQueue.cpp/385:Submitting new req.
UrlTrustResolver(0x11d4d38)
2013-12-20
11:33:04.111 Lync[563:6d00000] INFO TRANSPORT CTransportThread.cpp/343:Sent
Request(UcwaAutoDiscoveryRequest) to Request Processor
2013-12-20
11:33:04.111 Lync[563:6d00000] WARNING TRANSPORT
CCredentialManager.cpp/317:CCredentialManager::getSpecificCredential returning
NULL credential for serviceId (4) type (1)!
2013-12-20
11:33:04.112 Lync[563:6d00000] INFO TRANSPORT
TransportUtilityFunctions.cpp/631:<SentRequest>
GET
https://frontend-lync.domain-int.com/autodiscover/autodiscoverservice.svc/root/user
Request Id:
0x11d4d38
HttpHeader:Accept
application/vnd.microsoft.rtc.autodiscover+xml;v=1
</SentRequest>
2013-12-20
11:33:04.112 Lync[563:6d00000] INFO UTILITIES
CHttpStreamPool.cpp/409:Allocating stream 0x125fa90 for url - https://frontend-lync.domain-int.com/autodiscover/autodiscoverservice.svc/root/user
with persistent id as 7
2013-12-20
11:33:04.112 Lync[563:6d00000] VERBOSE TRANSPORT
CHttpProxyHelper.cpp/436:CHttpProxyHelper::discoverProxy : No proxy found for
url https://frontend-lync.domain-int.com/autodiscover/autodiscoverservice.svc/root/user.
Sending over direct connection.
2013-12-20
11:33:04.113 Lync[563:6d00000] INFO UTILITIES CHttpStreamPool.cpp/609:Releasing
stream 0x12028f0.
2013-12-20
11:33:04.261 Lync[563:6d00000] INFO UTILITIES CHttpConnection.cpp/577:Received
kCFStreamEventEndEncountered (UcwaAutoDiscoveryRequest)isHeadersAvailable =
true responseHeadersHandle = 11cfbd0
2013-12-20
11:33:04.262 Lync[563:6d00000] INFO UTILITIES CHttpConnection.cpp/628:Response
status = 200 for request UcwaAutoDiscoveryRequest
2013-12-20
11:33:04.262 Lync[563:6d00000] INFO UTILITIES
CHttpStreamPool.cpp/455:Scheduling stream 0x11cbe40 for release.
2013-12-20
11:33:04.263 Lync[563:6d00000] INFO TRANSPORT
CHttpRequestProcessor.cpp/173:Received response of
request(UcwaAutoDiscoveryRequest) with status = 0x0
2013-12-20
11:33:04.263 Lync[563:6d00000] INFO TRANSPORT
TransportUtilityFunctions.cpp/925:<ReceivedResponse>
GET
https://lyncdiscover.domain-ext.com/?sipuri=sip:[email protected]
Request Id:
0x12450d8
HttpHeader:Cache-Control
no-cache
HttpHeader:Content-Length
1076
HttpHeader:Content-Type
application/vnd.microsoft.rtc.autodiscover+xml; v=1
HttpHeader:Date
Fri, 20 Dec 2013 10:33:02 GMT
HttpHeader:Expires
-1
HttpHeader:Pragma
no-cache
HttpHeader:Server
Microsoft-IIS/8.5
HttpHeader:StatusCode
200
HttpHeader:X-AspNet-Version
4.0.30319
HttpHeader:X-Content-Type-Options
nosniff
HttpHeader:X-MS-Server-Fqdn
frontend-lync.domain-int.com
HttpHeader:X-Powered-By
ASP.NET, ARR/2.5
Ôªø<?xml
version="1.0" encoding="utf-8"?><AutodiscoverResponse
xmlns:xsd="http://www.w3.org/2001/XMLSchema"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
AccessLocation="Internal"><Root><Link
token="Domain" href="https://frontend-lync.domain-int.com/Autodiscover/AutodiscoverService.svc/root/domain?originalDomain=domain-ext.com"
/><Link token="User" href="https://frontend-lync.domain-int.com/Autodiscover/AutodiscoverService.svc/root/user?originalDomain=domain-ext.com"
/><Link token="Self" href="https://frontend-lync.domain-int.com/Autodiscover/AutodiscoverService.svc/root?originalDomain=domain-ext.com"
/><Link token="OAuth" href="https://frontend-lync.domain-int.com/Autodiscover/AutodiscoverService.svc/root/oauth/user?originalDomain=domain-ext.com"
/><Link token="External/XFrame"
href="https://lyncwebexternal.domain-ext.com/Autodiscover/XFrame/XFrame.html"
/><Link token="Internal/XFrame" href="https://frontend-lync.domain-int.com/Autodiscover/XFrame/XFrame.html"
/><Link token="XFrame" href="https://lyncwebexternal.domain-ext.com/Autodiscover/XFrame/XFrame.html"
/></Root></AutodiscoverResponse>
</ReceivedResponse>
2013-12-20
11:33:04.264 Lync[563:6d00000] INFO TRANSPORT
CUcwaAutoDiscoveryResponse.cpp/112:location value is internal
2013-12-20
11:33:04.265 Lync[563:6d00000] INFO TRANSPORT
CUcwaAutoDiscoveryResponse.cpp/195:User url is https://frontend-lync.domain-int.com/autodiscover/autodiscoverservice.svc/root/user?originaldomain=domain-ext.com
2013-12-20
11:33:04.265 Lync[563:6d00000] INFO TRANSPORT
CHttpRequestProcessor.cpp/266:Sending event to main thread for
request(0x12450d8)
2013-12-20
11:33:04.266 Lync[563:3a71018c] INFO APPLICATION CTransportRequestRetrialQueue.cpp/822:Req.
completed, Stopping timer.
2013-12-20
11:33:04.266 Lync[563:3a71018c] INFO APPLICATION
CUcwaAutoDiscoveryGetUserUrlOperation.cpp/290:Received a root response
2013-12-20
11:33:04.266 Lync[563:3a71018c] INFO APPLICATION CUcwaAutoDiscoveryGetUserUrlOperation.cpp/224:UcwaAutoDiscoveryGetUserUrlOperation
completed with url = https://lyncdiscover.domain-ext.com/?sipuri=sip:[email protected],
userUrl = https://frontend-lync.domain-int.com/autodiscover/autodiscoverservice.svc/root/user?originaldomain=domain-ext.com,
status = S_OK (S0-0-0)
2013-12-20
11:33:04.266 Lync[563:3a71018c] INFO APPLICATION
CTransportRequestRetrialQueue.cpp/725:Response received for req.
GET-UnAuthenticatedGet(0x12450d8): S_OK (S0-0-0) (Success); Done with req.; Stopping
resend timer
2013-12-20
11:33:04.267 Lync[563:3a71018c] INFO APPLICATION
CTransportRequestRetrialQueue.cpp/399:Cancelling all requests
2013-12-20
11:33:04.267 Lync[563:3a71018c] INFO APPLICATION
CTransportRequestRetrialQueue.cpp/409:Cancelling request: 0x11d4d38
2013-12-20
11:33:04.267 Lync[563:3a71018c] INFO TRANSPORT CSessionBase.hxx/158:Cancelling
request: 0x11d4d38
2013-12-20
11:33:04.267 Lync[563:3a71018c] INFO TRANSPORT CTransportThread.cpp/163:Added
Request(UcwaAutoDiscoveryRequest) to Request Processor queue
2013-12-20
11:33:04.267 Lync[563:3a71018c] INFO APPLICATION
CUrlRedirectAndTrustResolver.cpp/610:UrlRedirectAndTrustResolver complete with
url = https://frontend-lync.domain-int.com/autodiscover/autodiscoverservice.svc/root/user,
Hops = 1, status = W_Cancelled (W0-0-6)
2013-12-20
11:33:04.267 Lync[563:3a71018c] INFO APPLICATION
CUcwaAutoDiscoveryGetUserUrlOperation.cpp/224:UcwaAutoDiscoveryGetUserUrlOperation
completed with url = http://lyncdiscover.domain-ext.com/?sipuri=sip:[email protected],
userUrl = , status = W_Cancelled (W0-0-6)
2013-12-20
11:33:04.268 Lync[563:6d00000] INFO TRANSPORT CTransportThread.cpp/343:Sent
Request(UcwaAutoDiscoveryRequest) to Request Processor
2013-12-20
11:33:04.268 Lync[563:3a71018c] INFO TRANSPORT CCredentialManager.cpp/176:getSpecificCredential
for serviceId(1) returning: credType (1) signInName ([email protected])
domain () username (mattia.spagnoli) password.empty() (0) certificate.isValid()
(0) privateKey.empty() (1) compatibleServiceIds(1)
2013-12-20
11:33:04.268 Lync[563:3a71018c] INFO TRANSPORT
CMetaDataManager.cpp/403:Received a request to get the meta data of type 0 for
url https://frontend-lync.domain-int.com/autodiscover/autodiscoverservice.svc/root/user?originaldomain=domain-ext.com
2013-12-20
11:33:04.269 Lync[563:3a71018c] INFO TRANSPORT CMetaDataManager.cpp/467:Sending
Unauthenticated get to get the web-ticket url
2013-12-20
11:33:04.269 Lync[563:3a71018c] INFO TRANSPORT CTransportThread.cpp/131:Added
Request() to Request Processor queue
2013-12-20
11:33:04.269 Lync[563:3a71018c] INFO TRANSPORT
CAuthenticationResolver.cpp/109:Waiting on Meta Data from https://frontend-lync.domain-int.com/autodiscover/autodiscoverservice.svc/root/user?originaldomain=domain-ext.com
2013-12-20
11:33:04.269 Lync[563:62d4000] INFO TRANSPORT CTransportThread.cpp/343:Sent
Request() to Request Processor
2013-12-20
11:33:04.270 Lync[563:3a71018c] INFO APPLICATION
CTransportRequestRetrialQueue.cpp/385:Submitting new req.
GET-AuthenticatedUserGetRequest(0x1201ab8)
2013-12-20
11:33:04.270 Lync[563:62d4000] WARNING TRANSPORT
CCredentialManager.cpp/317:CCredentialManager::getSpecificCredential returning
NULL credential for serviceId (4) type (1)!
2013-12-20
11:33:04.270 Lync[563:3a71018c] INFO APPLICATION
CUcwaAutoDiscoveryService.cpp/1189:Submitting Authenticated AutoDiscovery
request to https://frontend-lync.domain-int.com/autodiscover/autodiscoverservice.svc/root/user?originaldomain=domain-ext.com
2013-12-20
11:33:04.270 Lync[563:6d00000] INFO UTILITIES
CHttpStreamPool.cpp/455:Scheduling stream 0x125fa90 for release.
2013-12-20
11:33:04.271 Lync[563:62d4000] INFO TRANSPORT
TransportUtilityFunctions.cpp/631:<SentRequest>
GET
https://frontend-lync.domain-int.com/autodiscover/autodiscoverservice.svc/root/user?originaldomain=domain-ext.com
Request Id:
0x1206198
HttpHeader:Accept
HttpHeader:X-MS-WebTicket
xxxxxxxxxx
</SentRequest>
2013-12-20
11:33:04.271 Lync[563:3a71018c] INFO APPLICATION
CUcwaAutoDiscoveryService.cpp/1662:Ignoring GetUserUrlOperation event as
current state is 6
2013-12-20
11:33:04.271 Lync[563:62d4000] INFO UTILITIES
CHttpStreamPool.cpp/409:Allocating stream 0x11c0a40 for url - https://frontend-lync.domain-int.com/autodiscover/autodiscoverservice.svc/root/user
with persistent id as 15
2013-12-20
11:33:04.271 Lync[563:3a71018c] INFO APPLICATION CUcwaAutoDiscoveryService.cpp/1664:Request
url was http://lyncdiscover.domain-ext.com/?sipuri=sip:[email protected]
2013-12-20
11:33:04.272 Lync[563:62d4000] VERBOSE TRANSPORT
CHttpProxyHelper.cpp/436:CHttpProxyHelper::discoverProxy : No proxy found for
url https://frontend-lync.domain-int.com/autodiscover/autodiscoverservice.svc/root/user?originaldomain=domain-ext.com.
Sending over direct connection.
2013-12-20
11:33:20.621 Lync[563:3a71018c] INFO UTILITIES
CNetworkMonitor.cpp/217:Reachabilility Flags IsWWAN(0):Reachable(0):TransientConnection(0):ConnectionRequired(0):ConnectionOnTraffic(0):InterventionRequired(0):ConnectionOnDemand(0):IsLocalAddress(0):IsDirect(0)
2013-12-20
11:33:20.623 Lync[563:3a71018c] INFO UTILITIES CNetworkMonitor.cpp/186:Updated
networkAvailableToConnect(CellularDataNetwork) -> NoNetwork,
isInAirplaneMode(0) -> 1
2013-12-20
11:33:20.623 Lync[563:3a71018c] INFO APPLICATION
CUcmpConversationsManager.cpp/4091:CUcmpConversationsManager::canDoVideoBasedOnNetworkAndPolicy
returns false because RequestWiFiForAudio or RequestWifiForVideo is true and
current network : is not WiFi
2013-12-20
11:33:20.623 Lync[563:3a71018c] INFO APPLICATION
CUcmpConversationsManager.cpp/1672:CUcmpConversationsManager::queryCapability
on StartP2PVideoCall returns false because
canDoVideoBasedOnNetworkAndPolicy
returned false
2013-12-20
11:33:20.904 Lync[563:3a71018c] INFO UTILITIES
CNetworkMonitor.cpp/217:Reachabilility Flags
IsWWAN(1):Reachable(1):TransientConnection(1):ConnectionRequired(0):ConnectionOnTraffic(0):InterventionRequired(0):ConnectionOnDemand(0):IsLocalAddress(1):IsDirect(0)
2013-12-20
11:33:20.905 Lync[563:3a71018c] INFO UTILITIES CNetworkMonitor.cpp/186:Updated
networkAvailableToConnect(NoNetwork) -> CellularDataNetwork,
isInAirplaneMode(1) -> 0
2013-12-20
11:33:20.905 Lync[563:3a71018c] INFO TRANSPORT CEventChannelManager.cpp/826:Received
network monitor event so restarting event channel.
2013-12-20
11:33:20.906 Lync[563:3a71018c] INFO TRANSPORT
CEventChannelManager.cpp/520:Moving the event channel aggressive mode.
2013-12-20
11:33:20.906 Lync[563:3a71018c] INFO APPLICATION
CUcmpConversationsManager.cpp/4091:CUcmpConversationsManager::canDoVideoBasedOnNetworkAndPolicy
returns false because RequestWiFiForAudio or RequestWifiForVideo is true and
current network : is not WiFi
2013-12-20
11:33:20.906 Lync[563:3a71018c] INFO APPLICATION
CUcmpConversationsManager.cpp/1672:CUcmpConversationsManager::queryCapability
on StartP2PVideoCall returns false because
canDoVideoBasedOnNetworkAndPolicy
returned false
2013-12-20
11:33:20.906 Lync[563:3a71018c] INFO APPLICATION CUcwaAutoDiscoveryService.cpp/2070:adIsEnabled
= 1, sipUri = sip:[email protected], m_internalADUrlInput =
m_externalADUrlInput =
2013-12-20
11:33:20.906 Lync[563:3a71018c] INFO APPLICATION
CUcwaAutoDiscoveryService.cpp/255:Discovery is in progress and process state is
6Ignoring request to start network discovery
2013-12-20
11:34:04.274 Lync[563:62d4000] INFO UTILITIES
CHttpStreamPool.cpp/455:Scheduling stream 0x11c0a40 for release.
2013-12-20
11:34:04.275 Lync[563:62d4000] ERROR UTILITIES CHttpConnection.cpp/517:Connection
timedout for request (0x%u0x12d1ea0) - notifying error E_ConnectionTimeoutError
2013-12-20
11:34:04.275 Lync[563:62d4000] INFO TRANSPORT
CHttpRequestProcessor.cpp/173:Received response of request() with status =
0x22020005
2013-12-20
11:34:04.276 Lync[563:62d4000] INFO TRANSPORT
CHttpRequestProcessor.cpp/201:Request
resulted in E_ConnectionTimeoutError (E2-2-5). The retry counter is: 0
2013-12-20
11:34:04.276 Lync[563:62d4000] INFO TRANSPORT
CHttpRequestProcessor.cpp/266:Sending event to main thread for
request(0x1206198)
2013-12-20
11:34:04.277 Lync[563:3a71018c] INFO TRANSPORT
CMetaDataManager.cpp/581:Received response for meta data request of type 60
with status 570556421
2013-12-20
11:34:04.277 Lync[563:3a71018c] ERROR TRANSPORT CMetaDataManager.cpp/597:Unable
to get a response to an unauthenticated get to url https://frontend-lync.domain-int.com/autodiscover/autodiscoverservice.svc/root/user?originaldomain=domain-ext.com
2013-12-20
11:34:04.278 Lync[563:3a71018c] INFO TRANSPORT CAuthenticationResolver.cpp/210:MetaData
retrieval for url https://frontend-lync.domain-int.com/autodiscover/autodiscoverservice.svc/root/user?originaldomain=domain-ext.com
completed with status 570556421
2013-12-20
11:34:04.278 Lync[563:3a71018c] INFO TRANSPORT CAuthenticationResolver.cpp/239:Deleting
1 pended Meta data requests for url https://frontend-lync.domain-int.com/autodiscover/autodiscoverservice.svc/root/user?originaldomain=domain-ext.com
2013-12-20
11:34:04.278 Lync[563:3a71018c] ERROR TRANSPORT CAuthenticationResolver.cpp/288:Unable
to get the meta data for server url https://frontend-lync.domain-int.com/autodiscover/autodiscoverservice.svc/root/user?originaldomain=domain-ext.com
2013-12-20
11:34:04.279 Lync[563:3a71018c] INFO TRANSPORT
CAuthenticationResolver.cpp/293:Failing request to the request manager
2013-12-20
11:34:04.279 Lync[563:3a71018c] INFO TRANSPORT CRequestManager.cpp/273:Failing
secure request UcwaAutoDiscoveryRequest with status E_ConnectionTimeoutError
(E2-2-5)
2013-12-20
11:34:04.279 Lync[563:3a71018c] INFO APPLICATION
CTransportRequestRetrialQueue.cpp/822:Req. completed, Stopping timer.
2013-12-20
11:34:04.279 Lync[563:3a71018c] INFO APPLICATION
CUcwaAutoDiscoveryService.cpp/1284:Received autodiscovery response with status
E_ConnectionTimeoutError (E2-2-5)
2013-12-20
11:34:04.279 Lync[563:3a71018c] INFO APPLICATION
CUcwaAutoDiscoveryService.cpp/1242:Raising Autodiscovery event with status
E_ConnectionTimeoutError (E2-2-5) for eventType 0
2013-12-20
11:34:04.280 Lync[563:3a71018c] INFO APPLICATION CUcwaAutoDiscoveryServiceRetrialWrapper.cpp/417:Received
event for type 0 with status E_ConnectionTimeoutError (E2-2-5)
2013-12-20
11:34:04.280 Lync[563:3a71018c] INFO APPLICATION
CUcwaAutoDiscoveryServiceRetrialWrapper.cpp/496:Raising Autodiscovery event
with status E_ConnectionTimeoutError (E2-2-5) for eventType 0
2013-12-20
11:34:04.280 Lync[563:3a71018c] ERROR APPLICATION
CUcwaAppSession.cpp/2066:Auto-discovery failed, aborting sign-in!
2013-12-20
11:34:04.280 Lync[563:3a71018c] INFO APPLICATION CUcwaAppSession.cpp/998:CUcwaAppSession::setNewActualState()
state=0
2013-12-20
11:34:04.294 Lync[563:3a71018c] INFO UTILITIES
CBasePersistableComponent.cpp/230:Storing 7 out-of-sync components took 10ms
2013-12-20
11:34:04.295 Lync[563:3a71018c] INFO UTILITIES CiOsAppStateQuery.h/147:Clearing
keep-alive timer callback
2013-12-20
11:34:04.295 Lync[563:6d00000] INFO TRANSPORT
CHttpRequestProcessor.cpp/134:Clearing request processor for component
UcwaAutoDiscoverySession on sign-out.
2013-12-20
11:34:04.295 Lync[563:62d4000] INFO TRANSPORT
CHttpRequestProcessor.cpp/134:Clearing request processor for component
MetaDataManager on sign-out.
2013-12-20
11:34:04.295 Lync[563:3a71018c] INFO APPLICATION CAlertReporter.cpp/64:Alert
received! Category 1, Type 201, level 0, error E_ConnectionTimeoutError
(E2-2-5), context '', hasAction=false
2013-12-20
11:34:04.296 Lync[563:6d00000] INFO UTILITIES CHttpStreamPool.cpp/609:Releasing
stream 0x11cbe40.
2013-12-20
11:34:04.296 Lync[563:62d4000] INFO UTILITIES CHttpStreamPool.cpp/609:Releasing
stream 0x11c0a40.
2013-12-20
11:34:04.296 Lync[563:3a71018c] INFO APPLICATION CAlertReporter.cpp/117:Alert
cleared of Category 1, Type 201, cleared 0 alerts
2013-12-20
11:34:04.297 Lync[563:3a71018c] INFO APPLICATION
CTransportRequestRetrialQueue.cpp/725:Response received for req.
GET-AuthenticatedUserGetRequest(0x1201ab8): E_ConnectionTimeoutError (E2-2-5)
(RemoteNetworkTemporaryError); Done with req.; Stopping resend timer
2013-12-20
11:34:04.298 Lync[563:3a71018c] INFO UI CMAudioUtil.mm/322:stopSound
2013-12-20
11:34:04.298 Lync[563:3a71018c] INFO UI CMAudioUtil.mm/322:stopSound
2013-12-20
11:34:04.298 Lync[563:3a71018c] INFO UI CMAudioUtil.mm/322:stopSound
2013-12-20
11:34:04.298 Lync[563:3a71018c] INFO UI CMAudioVideoToastViewController.mm/992:Cancelling
local notification
2013-12-20
11:34:04.299 Lync[563:6d00000] INFO UTILITIES CHttpStreamPool.cpp/609:Releasing
stream 0x125fa90.
2013-12-20
11:34:04.300 Lync[563:3a71018c] INFO UI CMRootViewController.mm/378:ActualState
= 0 DesiredState = 2 DataAvailable = 0
2013-12-20
11:34:04.300 Lync[563:3a71018c] INFO UI
CMDetailViewController.mm/229:ActualState = 0 DesiredState = 1 DataAvailable = 0
2013-12-20
11:34:04.300 Lync[563:3a71018c] INFO UI CMDetailViewController.mm/262:ActualState
= IsSignedOut DesiredState = BeSignedIn DataAvailable = 0 Showing UI =
CredentialTableViewController
2013-12-20
11:34:04.300 Lync[563:3a71018c] INFO UI CMConversationCommon.mm/43:not signed
in
2013-12-20
11:34:04.301 Lync[563:3a71018c] INFO UI CMConversationCommon.mm/43:not signed
in
2013-12-20
11:34:04.301 Lync[563:3a71018c] INFO UI CMConversationCommon.mm/43:not signed
in
2013-12-20
11:34:04.301 Lync[563:3a71018c] INFO UI CMConversationCommon.mm/43:not signed
in
2013-12-20
11:34:04.301 Lync[563:3a71018c] INFO UI CMConversationCommon.mm/43:not signed
in
2013-12-20
11:34:04.301 Lync[563:3a71018c] INFO UI CMNotificationManager.mm/705:desired
view is alert, size 1
2013-12-20
11:34:04.301 Lync[563:3a71018c] INFO UI CMNotificationManager.mm/745:adding the
desired view
2013-12-20
11:34:04.302 Lync[563:3a71018c] INFO UI CMNotificationManager.mm/480:reposition
floating views
2013-12-20
11:34:04.302 Lync[563:3a71018c] INFO UI CMAlertViewController.mm/110:showalert
is 1
2013-12-20
11:34:04.302 Lync[563:3a71018c] INFO UI CMAlertViewController.mm/114:showalert
is 0
2013-12-20
11:34:04.302 Lync[563:3a71018c] INFO UI CMUIUtil.mm/402:Mapping error code =
0x22020005, context = , type = 201
2013-12-20 11:34:04.303 Lync[563:3a71018c] INFO UI
CMUIUtil.mm/1680:Mapped error message is 'Non riesco a connettermi al server
perché potrebbe essere occupato o temporaneamente non disponibile. Riprova.
2013-12-20
11:34:04.304 Lync[563:3a71018c] ERROR UI
CMDismissButtonBaseViewController.mm/89:before: view height 1024.000000, width
45.000000, x 64.000000, y 0.000000
2013-12-20
11:34:04.304 Lync[563:3a71018c] INFO UI
CMNotificationManager.mm/1089:viewFrame: origin x 64.000000, origin y 0.000000,
height 1024.000000, width 45.000000
2013-12-20
11:34:04.304 Lync[563:3a71018c] INFO UI CMNotificationManager.mm/1195:resize
alert label, origin x 44.000000, origin y 2.000000, height 41.000000, width
936.000000
2013-12-20
11:34:04.305 Lync[563:3a71018c] ERROR UI CMDismissButtonBaseViewController.mm/104:after:
self.label.frame height 41.000000, width 936.000000, x 44.000000, y 2.000000
2013-12-20
11:34:04.305 Lync[563:3a71018c] INFO UI CMConversationCommon.mm/43:not signed
in
2013-12-20
11:34:04.305 Lync[563:3a71018c] INFO UI CMConversationCommon.mm/43:not signed
in
2013-12-20
11:34:04.305 Lync[563:3a71018c] INFO UI CMConversationCommon.mm/43:not signed
in
2013-12-20
11:34:04.305 Lync[563:3a71018c] INFO UI CMConversationCommon.mm/43:not signed
in
2013-12-20
11:34:04.305 Lync[563:3a71018c] INFO UI CMConversationCommon.mm/43:not signed
in
2013-12-20
11:34:04.306 Lync[563:3a71018c] INFO UI CMNotificationManager.mm/705:desired
view is alert, size 1
2013-12-20
11:34:04.306 Lync[563:3a71018c] INFO UI CMNotificationManager.mm/718:desired
view is same as the current view
2013-12-20
11:34:04.306 Lync[563:3a71018c] INFO UI CMNotificationManager.mm/480:reposition
floating views
2013-12-20
11:34:04.306 Lync[563:3a71018c] INFO UI CMAlertViewController.mm/110:showalert
is 0
2013-12-20
11:34:04.306 Lync[563:3a71018c] ERROR UI
CMDismissButtonBaseViewController.mm/89:before: view height 1024.000000, width
45.000000, x 64.000000, y 0.000000
2013-12-20
11:34:04.307 Lync[563:3a71018c] INFO UI
CMNotificationManager.mm/1089:viewFrame: origin x 64.000000, origin y 0.000000,
height 1024.000000, width 45.000000
2013-12-20
11:34:04.307 Lync[563:3a71018c] INFO UI CMNotificationManager.mm/1195:resize
alert label, origin x 44.000000, origin y 2.000000, height 41.000000, width
936.000000
2013-12-20
11:34:04.307 Lync[563:3a71018c] ERROR UI
CMDismissButtonBaseViewController.mm/104:after: self.label.frame height
41.000000, width 936.000000, x 44.000000, y 2.000000
2013-12-20
11:34:04.337 Lync[563:3a71018c] INFO UI CMConversationCommon.mm/43:not signed
in
2013-12-20
11:34:04.337 Lync[563:3a71018c] INFO UI CMConversationCommon.mm/43:not signed
in
2013-12-20
11:34:04.338 Lync[563:3a71018c] INFO UI CMConversationCommon.mm/43:not signed
in
2013-12-20
11:34:04.338 Lync[563:3a71018c] INFO UI CMConversationCommon.mm/43:not signed
in
2013-12-20
11:34:04.338 Lync[563:3a71018c] INFO UI CMConversationCommon.mm/43:not signed
in
2013-12-20
11:34:04.338 Lync[563:3a71018c] INFO UI CMNotificationManager.mm/705:desired
view is alert, size 1
2013-12-20
11:34:04.338 Lync[563:3a71018c] INFO UI CMNotificationManager.mm/718:desired
view is same as the current view
2013-12-20
11:34:04.338 Lync[563:3a71018c] INFO UI CMNotificationManager.mm/480:reposition
floating views
2013-12-20
11:34:04.339 Lync[563:3a71018c] INFO UI CMAlertViewController.mm/110:showalert is
0
2013-12-20
11:34:04.339 Lync[563:3a71018c] ERROR UI
CMDismissButtonBaseViewController.mm/89:before: view height 1024.000000, width
45.000000, x 64.000000, y 0.000000
2013-12-20
11:34:04.339 Lync[563:3a71018c] INFO UI CMNotificationManager.mm/1089:viewFrame:
origin x 64.000000, origin y 0.000000, height 1024.000000, width 45.000000
2013-12-20
11:34:04.339 Lync[563:3a71018c] INFO UI CMNotificationManager.mm/1195:resize
alert label, origin x 44.000000, origin y 2.000000, height 41.000000, width
936.000000
2013-12-20
11:34:04.339 Lync[563:3a71018c] ERROR UI
CMDismissButtonBaseViewController.mm/104:after: self.label.frame height
41.000000, width 936.000000, x 44.000000, y 2.000000
2013-12-20
11:34:04.340 Lync[563:3a71018c] INFO UI CMSplitViewController.mm/162:Details
Pane is in Full screen with controller
2013-12-20
11:34:04.340 Lync[563:3a71018c] INFO UI CMSplitViewController.mm/204:Split view
frame orientation UIInterfaceOrientationLandscapeLeft Height = 748.000000 Width
= 1024.000000 origin.x = 20.000000 origin.y = 0.000000 keyboardHeight =
0.000000
2013-12-20
11:34:04.341 Lync[563:3a71018c] INFO UI CMSplitViewController.mm/162:Details
Pane is in Full screen with controller
2013-12-20
11:34:04.341 Lync[563:3a71018c] INFO UI CMSplitViewController.mm/204:Split view
frame orientation UIInterfaceOrientationLandscapeLeft Height = 748.000000 Width
= 1024.000000 origin.x = 20.000000 origin.y = 0.000000 keyboardHeight =
0.000000
2013-12-20
11:34:04.343 Lync[563:3a71018c] INFO UI
CMToolsViewController.mm/349:ActualState = 0 DesiredState = 1 DataAvailable = 0
2013-12-20
11:34:04.344 Lync[563:3a71018c] INFO UI
CMAlertViewController.mm/93:ObservableListItem Added event received
2013-12-20
11:34:04.344 Lync[563:3a71018c] INFO UI CMAlertViewController.mm/103:showalert
is 1
2013-12-20
11:34:04.344 Lync[563:3a71018c] INFO UI CMConversationCommon.mm/43:not signed
in
2013-12-20
11:34:04.344 Lync[563:3a71018c] INFO UI CMConversationCommon.mm/43:not signed
in
2013-12-20
11:34:04.344 Lync[563:3a71018c] INFO UI CMConversationCommon.mm/43:not signed
in
2013-12-20
11:34:04.344 Lync[563:3a71018c] INFO UI CMConversationCommon.mm/43:not signed
in
2013-12-20
11:34:04.345 Lync[563:3a71018c] INFO UI CMConversationCommon.mm/43:not signed
in
2013-12-20
11:34:04.345 Lync[563:3a71018c] INFO UI CMNotificationManager.mm/705:desired
view is alert, size 1
2013-12-20
11:34:04.345 Lync[563:3a71018c] INFO UI CMNotificationManager.mm/718:desired
view is same as the current view
2013-12-20
11:34:04.345 Lync[563:3a71018c] INFO UI CMNotificationManager.mm/480:reposition
floating views
2013-12-20
11:34:04.345 Lync[563:3a71018c] INFO UI CMAlertViewController.mm/110:showalert
is 1
2013-12-20
11:34:04.345 Lync[563:3a71018c] INFO UI CMAlertViewController.mm/114:showalert
is 0
2013-12-20
11:34:04.345 Lync[563:3a71018c] INFO UI CMUIUtil.mm/402:Mapping error code =
0x22020005, context = , type = 201
2013-12-20
11:34:04.346 Lync[563:3a71018c] INFO UI CMUIUtil.mm/1680:Mapped error message
is ‘Cannot connect to the server because it could be busy or temporarily
unavailable. Retry.’

Hi Kent,
thanks a lot for your reply!
I created _sip._tls.domain-ext.com SRV record in the external DNS and now autodiscovery works fine. At the beginning I had not created it because I thought lyncdiscover.domain-ext.com A record was enough for autodiscovery. I still cannot understand
why lyncdiscover.domain-ext.com points to reverse proxy, while _sip._tls.domain-ext.com points to Edge server. It's strange because both are part of the research order of Lync 2013 desktop clients.
By the way, mobility still does not work. I tried to insert bot the https URLs as manual configuration but Lync 2013 for iPad was not be able to login. I tried to paste both the URLs in the web browser and:
with https://<ExtwebFQDN>/Autodiscover/autodiscoverservice.svc/Root appears the "Root.json" file to be downloaded;
with https://<IntwebFQDN>/AutoDiscover/AutoDiscover.svc/Root
the message "500-Internal error of server" appears.
Any suggests from you about how to check the configuration of ISS/ARR 2.5?
Thanks again!

Login issues with Mobile Theme 50

Hi All,
I have an APEX 4.2 application (Mobile Theme 50) which is running on Oracle 10g and is being accessed via iPads. Whenever you exit out of the application by clicking on the iPad button and go into any other App, Mail, Calendar etc, you are forced back to the login page, rather than allowing the user to continue from where they were . We have other APEX applications using a desktop theme that will happily let you check your mail and when you swap back to Safari your session is still there and you can continue on from the page you were on when you left.
Authentication is a requirement, but I was hoping that once they login and the session hasn't timed out, that they would be free to move about the iPad without having to login again.
Are there any setting or changes that can be made to change this behaviour?
Cheers
Mike

Hello,
Hi Mahmoud, sorry I haven't had time to build a sample app, I might be able to knock up a sample this evening.
This appears to be an iPad specif problem. Tested it on a Samsung and it is fine. There is also one other subtle difference on the iPad itself, that is when you save the URL as a bookmark it always opens within Safari so you can open other apps, then go back into the apex app within Safari and your session is happily running. If you save the URL to the Home screen it opens in a full screen mode (with no minimise options) and you cannot jump out of it unless you are ready to login again.
After a bit more Googling I found that in the default Page Template for Theme 50 it has the following Meta Tag in the Header.
<meta name="apple-mobile-web-app-capable" content="yes" />
From what I can gather this will default the application to run in full screen mode.
I made a copy of the page template and removed this tag and it now always runs within Safari. (After removing the link from the iPad home screen and creating a new one....Some odd cache problems seem to happen)
It would be good to have the full screen mode running as it looks neater and obviouly gives you a bit more screen real estate, but removing the meta tags appears to solve the constant login issues....Our users can decide which they prefer.
Cheers
Mike

Issue with Mobile BI in iOS

hi
We are currently discovering BusinessObjects Mobile BI with focus on Design Studio.
Microsoft TMG is used as reverse proxy having Basic Authentication.
All configured succesfully, test url working fine BUT a few issues we run into:
- Android tablet device working good but not displaying Design Studio documents (WebIntelligence and Dashboards do work)
- iPhone also not showing Design Studio documents
- ALL iOS devices crash during runtime
iOS Mobi app used is 6.1.11
iOS used is 8.1.1
Bi Platform 4.1 SP5
any ideas on our issues?
are there more companys around using TMG?

Hi Gerben,
1. Regarding iOS crash
We have observed that certain functionality/workflow crashed the application when using the Mobile BI 6.1.11 and iOS 8.1.
For the same workflow the application was not crashing when using iOS 7.1.
We have raised an OSS with SAP and it is in progress. I suggest you test with different versions of OS and see if the app still crashes.
2. Regarding Design Studio Documents
a) Can you open the Design Studio Application directly from your PC browser ?
b) Suggest you check the access rights for Design Studio as well.
3. Reverse Proxy
Are you facing the same issues without the reverse proxy ?
Regards
Robin

Softkeyboard issue with mobile skin Textinput

Hi Adobe,
When can we get the fixing of the issue related to the mobile skinning based TextInput. As with the mobile skin based textinpu neither the softkeyboard Type nor AutoCapitalization etc. works.
Can Any one confirm on this??
with Regards,
Shardul

Hi Nimisha,
You are right enough but I also require the vertical Scrolling on the component which is holding the TextInput box.
If you have any idea please let me know.
It should be done fix for the "spark.skins.mobile.TextInputSkin".
I have reported this bug long ago,hope it will be resolved sooner or later.
https://bugbase.adobe.com/index.cfm?event=bug&id=3292370
with Regards,
Shardul

Issue with mobile network signal ("Searching")

I recently purchased 2 iPad from Singapore and upon retuning to Malaysia, i applied for 2 mobile broadband package from the same mobile provider.
Issue i am facing is, on one of the ipad, the mobile network signal bar displays "Searching" almost all the time; only a few times it displays strong signal with 3G icon then it drops to "Searching" again. I tried to swap the micro sim around between both ipad but no such issue on the 2nd ipad which is consistenly strong signal.
I even restored the ipad (factory shipped 3.2.2) but no success.
What should i do?

After further test, I noticed the unit can't find any mobile provider under Settings > Carrier when signal bar displays "Searching".
Enabling airplane mode does not help either; only workaround is to disable Cellular Data under Settings > Cellular Data then Enable it again.

IPhone / iPad login issues with Mobile Theme

I'm wondering if this is a bug or just a part of design of the mobile theme. I'm developing a mobile site using the new mobile theme in 4.2.1. I open it up on Safari on either an iPhone or iPad and then want to add it to the home screen. No issues there.
I'm able to sign in fine with the shortcut on the home screen, but if I switch to another app or go back to the home screen and return to the APEX app, I always have to log in again. Pretty inconvenient to keep having to do this. Anyone aware of a work around or fix?
Here's a sample app where it can be seen:
http://apex.oracle.com/pls/apex/f?p=14837:1:115417454230874:::::
guest / test123

Hi,
When you made a shortcut on our device, then it technically stores the url. then the session value is also captured. so when you return from another app to the home screen and click the icon on url device it resets the session everytime you go through that url as it no more esists or active. So its asking you to log back in

Issue with file upload to Microsoft One Drive

Hi,
My uploaded file(25.6MB, 44 seconds long) from Adobe Premier Elements 9 will not play on Microsoft One Drive(MOD),
Is anyone else have problems using MOD?
I created the file I uploaded on my new HP Envy Computer(x64 proccessor with 8 gig of RAM).
I created this file on the Adobe Premier Elements 9 software, saved to my computer, and then uploaded to MOD.
I created it from my project by choosing the MPEG category Then within the MPEG category I chose the HD 720p 30 footprint as the smallest and fastest option to upload.
. I saved as a file in a folder on my computer. Don't know if this makes a difference but when I right clicked I chose "Windows Media Player" as the "Opens With" option.Don't think "Opens With" option really matter? Doesn't MOD automatically convert the file to whatever they want to use to open the file anyway?
So that is the file I uploaded to MOD using the MOD "Upload" button.
When I clicked to play, after waiting for what I assume was a "buffering process" , I got a "Sorry, This video can't be played." message.
Also, FYI , i uploaded to Google Drive . It plays but pauses to buffer about 30 seconds in.
You Tube is the another drive I uploaded to. It plays perfectly there. But I would preferr to play on MOD. You feedback appreciated.
Thanks,
Ed'sAPE9

Hi,
Are you facing this error with specific browser. Test it in another browser.
If yes, check below SAP Note
1900896 - Browser: IE Restrictions for Portal and NWBC content - IE Quirks and Standards Document Modes

Bb 9860 sku2 having issue with mobile ntwk connection

I have BB9860 unlocked phone bought thru rim employee. It worked fine with Chatr carrier gsm voice only. Now, it gave me 507 error. i reload the software from SaskTel, and device bootup fine. but never able to connect to cellular ntwk anymore. i tried videotron carrier OS download as well, same issue. The device shows in the desktop manager as CDMA device for radio type. How can I make it to work for GSM voice?
I tried rogers OS load and not going thru, since it didn't show OS to be loaded, i beleive due to same verision detected. I deleted the vender.xml file before every OS load. Please help.

Hi and Welcome to the Community!
The only difference in loading different carriers OS packages is that each may have a different version. Loading the exact same version from different carriers will not result in anything different.
The 9860 has multiple band capabilities...but you must set that in the Manage Connections area. But...
ssomasun wrote:
The device shows in the desktop manager as CDMA device for radio type.
That is a bit odd, since from all I understand the 9860 does not even have a CDMA radio...the 9850 does, but not the 9860. Refer:
http://www.gsmarena.com/blackberry_torch_9860-3926.php
http://www.gsmarena.com/blackberry_torch_9850-4088.php
One might almost wonder exactly what device you have...you might want to talk to whoever provided it to you, perhaps it's some sort of non-standard hybrid or engineering-only device, and therefore might require very special handling not available to the general public.
Good luck!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

DHCP issue with mobility anchor

Hi Guys,
I am having a bit of trouble to get the DHCP to work in my configuration. basically I have configured one SSID on two WLCs (running same version of code), I configured WLC 1 as anchor controller and configured itself as mobility anchor (local), and on foreign controller (WLC2), I have configured the anchor as a mobility anchor. I have added both of the WLCs in each other's mobility list, however WLC1 and 2 are not in the same mobility group. clients are getting IP address through an external DHCP server.
the problem is that when I used the management interface for the WLAN, I could get IP address through DHCP without any problem, however if I use another dynamic interface created for the SSID, then I could not get IP address anymore. I did another test with two WLCs configured in the same mobility group, then everythnig works fine. I have double checked my configuration for the dynamic interface but could not find anything wrong.
so my question is
is it possible to do auto anchoring configuration with two WLCs in different mobility group (different mobility group name), since based on my test management interface works, but another dynamic interface did not work. in the configuration guide, it says: "you must add controllers to the mobility group member list before you can designate them as mobiolity anchors for a WLAN", does that mean the mobility group name has to be the same for both of the WLCs? if that's the case why does management interface worked?
thanks in advance for you help.

Hi Nicolas,
thanks for your reply, i guess that's where the problem is - I could not ping the dynamic interface from the DHCP server. (eping and mping works fine)
however I could ping the dynamic interface of the foreign controller (i have created another dynamic interface on the same subnet on the foreign controller, i understand it's not really necessary since we getting IP in the range defined on the anchor controller). the only difference between the two controllers is that the foreign controller enabled LAG, and only connected to the core swithc number 1, but the anchor controlelr is not (it has two connections to two core switches respectively).
so does this mean I can not use this controller to be a anchor controller if it has two connections to two differnet switches? if yes is there any documentation on this point?
Thanks very much for your help.

Recurring issue with mobile upload

Similar Messages

Maybe you are looking for