Recycling IIS Application Pool when processor load reaches a certain %

Hi Team
I need to create a recycle event when the IIS server processor load reaches about 90%, it would then need to recycle the IIS Applications Pool,
Any advice would be greatly appreciated, thanks

In addition to this, i know that this can be done by IIS but my boss wants it to be logged and managed by SCOM, thanks

Similar Messages

Error occurred in deployment step 'Recycle IIS Application Pool': Could not load file or assembly 'Microsoft.SharePoint, Version=14.0.0.0, Culture=neutral, PublicKeyToken=71e9bce111e9429c' or one of its dependencies. The system cannot find the file specif

Hi All,
I am using Virtual box to connect to Sharepoint 2013 VPC. Due to an unexpected sutdown of my machine the VPC got some issue. Now I restored it using my bak up file. But after this when I deploy my sharepoint 2013 farm solution Iam getting the following error.
Error occurred in deployment step 'Recycle IIS Application Pool': Could not load file or assembly 'Microsoft.SharePoint, Version=14.0.0.0, Culture=neutral, PublicKeyToken=71e9bce111e9429c' or one of its dependencies. The system cannot find the file specified..
Editing the web.config and adding dependentAssembly didnt worked for me.
What could be the issue? Any suggestions ?
Thanks in advance...
Regards
Nimisha
[email protected]

Hi,
Please try to do as follows:
1. Check your farm solution whether reference the Microsoft.SharePoint.dll. Or try to add the Microsoft.SharePoint.dll into the bin folder.
2. Execute the iisreset command.
3. Create a new farm solution and check whether the issue still occurs or not.
Best Regards
Dennis Guo
TechNet Community Support

Error occurred in deployment step 'Recycle IIS Application Pool'

Currently i’m working on a development machine for SharePoint 2010. Even the development machine is setup with multiple accounts as security describes. Therefore sometimes you run into strange (security) error messages. The following error message
occured when i tried to deploy a SharePoint project from Visual Studio 2010.
Error occurred in deployment step ‘Recycle IIS Application Pool’:
<nativehr>0×80070005</nativehr><nativestack></nativestack>Access denied
It seems that the account under which your Visual Studio 2010 is running needs to have sufficient rights on the web application to which you are deploying your solution. In my case this was easily fixed by putting my domain account in the site collection
administrators list for that specific web application.

Hi vishal,
The root cause of the issue is
You don't have IIS restart privilege on windows OS
Even if you have it, you have not added your login account in to SharePoint sitecollection administrator.
To solve the issue
To see whether you have privilege or not, you can open a command prompt and type "IISReset".
If you able to restart, then it will restart successfully otherwise it will deny it. The reason is, Though you are in administrators group, windows 2008 will not run on the administrator privilege. Every time when you do an operation like IIS
restart or Installation, it will prompt for UAC (User Account Control). You should accept the dialog box and elevate the privilege to run the operation.
Or you can right click the application whatever you want to run and click the menu option "Run as Administrator" which will solve the issue.
If you want to avoid UAC and directly run through you admin account then, go to Control panel -> Manage account -> Hide UAC
Second if you have all the privilege and still you are getting error in VS2010 as "'Recycle IIS Application Pool':0x80070005Access denied, then you have to add your account in to site collection admin.
1) You can do this by going to sharepoint administration page.
2) Navigate to the site collection administration option
3) Add your name into site collection administrator as a second owner. SharePoint will allow a second owner for site colleciton
For more informaion, please refer to:
http://blogs.msdn.com/b/suresh/archive/2011/01/01/recycle-iis-application-pool-0x80070005-access-denied-deploying-sharepoint-solution-iis-restart-issue.aspx
Thanks,
Simon

Error occurred in deployment step Recycle IIS Application Pool - migration 2010 to 2013

Hello
When I upgraded my solution from 2010 to 2013 and tried to deploy got the following error
Error occurred in deployment step 'Recycle IIS Application Pool'
Any idea ?
Thanks
Momo

Hi Momo,
Thank you very much for sharing your solution here. It would be helpful for others who encounter similar issue.
Thanks again,
Eric
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support,
contact [email protected]
Eric Tao
TechNet Community Support

Error occurred in deployment step 'Recycle IIS Application Pool': Cannot connect to the SharePoint site

How to fix:
Error occurred in deployment step 'Recycle IIS Application Pool': Cannot connect to the SharePoint site: Make sure that this is a valid URL and the SharePoint site is running on the local computer. If you moved this project to a new computer or if
the URL of the SharePoint site has changed since you created the project, update the Site URL property of the project.

Hi
This is an issue with the permissions. Check this link
http://www.spdoctor.net/Pages/message.aspx?name=Error-occurred-in-deployment-step-Recycle-IIS-Application-Pool
http://stackoverflow.com/questions/7417046/vs2010-error-in-recycling-iis-application-pool-not-found
Thanks
Girish

"Recycle IIS Application Pool" error while deploying solution using Visual Studio

Hi All,
I am getting below error while deploying solution from Visual Studio. I have verified the URL and its okay and site is also up and running and accessible.
Error 1 Error occurred in deployment step 'Recycle IIS Application Pool': Cannot connect to the SharePoint site:
http://portal/sites/site1/. Make sure that this is a valid URL and the SharePoint site is running on the local computer. If you moved this project to a new computer or if the URL of the SharePoint site has changed since
you created the project, update the Site URL property of the project.
Suggest some solution.
Thanks in advance.

Hi,
Please do/Validate the below things..
1.Current logged in user is in Administrator group
of SharePoint server.
2.Current logged user has db_owner permission for Content
Database of the site you are trying to deploy .
http://www.sharemuch.com/2010/03/19/resolving-vs-2010-solution-deployment-issues-for-sharepoint-2010-projects/
and also
Do a IIS reset
Check if IIS is resetting.
If it is not, then disable UAC from control panel and IIS reset will work.
Go to Central Administration site
Navigate to the Manage Web Applications page
Click on the web application that hosts the site you are trying to deploy to
Click the User Policy ribbon item.
Add your windows account to the list of users with the Full Control permission.
Don't forget to mark it as an Answer if it resolves your issue and Vote Me as helpful if it useful.
Mahesh

Error occurred in deployment step 'Recycle IIS Application Pool': Object reference is not set to an instance of a object.

Hello,
When I do a deploy from VS2012 I get the error above.
Specifications:
- User is Farm Admin
- User is Site Collection Admin
- User is added with full control to the Web application user policy
- User is db_owner of the content db, config db, admin content db
- User Access Control is disabled
- User is Local administrator
- User is a member of WSS_ADMIN_WPG
- host name is added to the host file.
Somebody has a solution?

almost you have everything, did you try to close the visual studio and start "Run as administrator". if not do it and try to redeploy.
I would also check if the Sharepoint Timer Services and Sharepoint administration Services running on all sharepoint server(via services console.)
Please remember to mark your question as answered &Vote helpful,if this solves/helps your problem. ****************************************************************************************** Thanks -WS MCITP(SharePoint 2010, 2013) Blog: http://wscheema.com/blog

When time line reaches a certain frame load swf into movieclip.

Hi,
I need some help with some actionsscript. When the timeline reaches a certain frame, I want an swf to load into a movieclip in that particular frame. I need this to occur on level 1 as the root of the site is pre loader. Any help would be much appreciated. Cheers

In that frame, on an actions layer, use either the loadMovie method or the MovieClipLoader.loadClip method to load the swf into the movieclip. There should be examples of using either in the help documents and via Google.

Powershell: Change IIS Application Pool passwords via WMI

BACKGROUND: I'm writing a script to pull all PCs in an OU, Search each server for IIS Application Pools running under a spesified user, change the password on the app pool, reset IIS.
I'm able to grab the application pools on a server...
$tmp = $NULL
$tmp = Get-WMIObject -class IISApplicationPoolSetting -namespace "root\microsoftiisv2" -computer $Server -authentication 6
I can find the app pool(s) I need...
$PoolsThatMatch = @()
if ($tmp) { $PoolsThatMatch += $tmp | where {$_.WAMUserName -like "contoso\$ServiceName"}}
I can see all the information rigth there...
$PoolsThatMatch | Select __Server,name,WAMUserName,WAMUserPass
I can even change the password on the local object...
$PoolsThatMatch[0].Properties["WAMUserPass"].Value = "PowerShellRocks!"
What I can't figure out is how to push the value back to the server! Please help!

Hi.
First, msdn points out the following caution which should be considered before changing the password.
Changing the value of this property is not recommended. If you do, you must change the Windows account password to the identical value. You must also synchronize existing IIS out-of-process application identities, using Component Services to edit the user name and password values, which are found on the Identity tab of the property sheet for each package.
http://msdn.microsoft.com/en-us/library/ms525467.aspx
Secondly, using the Put() method should set the changes made:
$PoolsThatMatch[0].PsObject.Properties["WAMUserPass"].Value = "Password2"
$PoolsThatMatch[0].Put()
Regards
NiklasNiklas Goude
Blog: www.powershell.nu
Twitter: @Ngoude

SharePoint Designer Workflow 'Failed on Start', SP Logs has WorkflowValidationFailedException, works ok when recycle IIS App Pool and restart

Hi there,
I know there are a lot of posts about "Failed to Start" errors, but I have yet to see one that describes our problem.
We have workflows built with SharePoint Designer 2007
Normally these workflows start ok and work completely
Occasionally though they will all fail to start, instead showing "Failed on Start (retrying)" in the Workflow Status and the following exception in the SP Logs:
01/16/2015 15:43:27.28 w3wp.exe (0x15D4) 0x1A00 Windows SharePoint Services Workflow Infrastructure 936l High Engine RunWorkflow: System.Workflow.ComponentModel.Compiler.WorkflowValidationFailedException: The workflow failed validation. at System.Workflow.Runtime.WorkflowDefinitionDispenser.ValidateDefinition(Activity root, Boolean isNewType, ITypeProvider typeProvider) at System.Workflow.Runtime.WorkflowDefinitionDispenser.LoadRootActivity(Type workflowType, Boolean createDefinition, Boolean initForRuntime) at System.Workflow.Runtime.WorkflowDefinitionDispenser.GetRootActivity(Type workflowType, Boolean createNew, Boolean initForRuntime) at System.Workflow.Runtime.WorkflowRuntime.InitializeExecutor(Guid instanceId, CreationContext context, WorkflowExecutor executor, WorkflowInstance workflowInstance) at System.Workflow.Runtime.WorkflowRuntime.Load(Guid key, CreationContext con...
01/16/2015 15:43:27.28* w3wp.exe (0x15D4) 0x1A00 Windows SharePoint Services Workflow Infrastructure 936l High ...text, WorkflowInstance workflowInstance) at System.Workflow.Runtime.WorkflowRuntime.GetWorkflowExecutor(Guid instanceId, CreationContext context) at System.Workflow.Runtime.WorkflowRuntime.InternalCreateWorkflow(CreationContext context, Guid instanceId) at System.Workflow.Runtime.WorkflowRuntime.CreateWorkflow(Type workflowType, Dictionary`2 namedArgumentValues, Guid instanceId) at Microsoft.SharePoint.Workflow.SPWinOeHostServices.Send(SPWinOeWorkflow winoeworkflow, SPWorkflowEvent e) at Microsoft.SharePoint.Workflow.SPWinOeEngine.RunWorkflow(Guid trackingId, SPWorkflowHostService host, SPWorkflow workflow, Collection`1 events, TimeSpan timeOut)
What is strange, is that if I recycle the App Pool for the SharePoint site and then restart the workflows, they all work fine for a time. Until the next time they don't =)
The workflows must be configured ok since they do work complete at time, but I wonder if there is something with the memory usage of the app pool or something that is being re-compiled when the App Pool is recycled
The App Pool is set to recycle nightly, and when virtual memory > 1700MB or memory > 1000MB
Is anyone able to shed any light on this problem?? Or what steps I can take to debug the problem further.
Thanks in advance
Miguel Clark =)

Hi Sudip,
Thanks for the link.
The workflows in question are SharePoint Designer workflows using standard actions, so unsure exactly how to check the 'correlation tokens' and 'DLLs', plus the workflow works fine as soon as I recycle the IIS App Pool, so do not see how these could be the
problem
As to the 'lodctr' commands, we have tried these in the past, to no effect. Though may try them again next time the issue comes up just to see if it does the same thing as recycling the app pool.
My big question here is "why would it suddenly work after recycling the app pool??" I feel like it must be something memory related, since recycling the app pool releases the resources used by the IIS worker process.
Miguel =)

NLB Web Front End (WFEs)servers & Clustering IIS Application Pool between the two WFEs

Hi All,
I have just encountered a very bad experience in my Production environment.My topology is as follows: NLB WFEs, MOSS APP server, Cluster DBs, DCs.
NLB on the WFEs is working fine. However, for some unknown reason, one of my site under the Application Pool in IIS Manager was stopped on one of the WFE and the site was down. NLB did not redirect request to the second WFE server.
My question is: How can I make sites under the Application Pool highly available? If any site is in a stopped state, there should be a mechanism in place to redirect request to the Application Pool on the second NLB WFE.
Kindly help and advise.
Thanks all.

Hi Noah,
The best way of knowing whether the Application pool is down is to monitor it.
Using appcmd, i can check the state of an application under the application pool.
I want to create a schedule task which will check the status of the application pool and in case the application pool is stopped, to send me an email as alerts.
Using Powershell and appcmd, can you guide me on how to do the above i.e I want to use Powershell with appcmd to check for availability of an application pool. If the status is stopped, send me an email as alert.
Thanks.

How to go back to frame 1 when the timeline reaches a certain frame?

I have a timeline that has some label frames at the very end of the timeline. During the timeline a user will hit a button on a frame and will jump to one of the label frames. On the label frame is another button that when clicked - returns the user to the previous frame. How do I make the movie return to frame 1 - without a button - but before it reaches the label frames? In other words, by simply reaching a certain frame in the movie, I want the timeline to go back to frame 1.
I am using Action Script 3 on a PC
Thank you.

Thanks from me as well. I'm trying to make an interactive house simulation game (basic) and hit this issue where the timeline needs to skip to the next segment as several options are available per room (listed one after the other in the timeline). Flash isn't particularly easy to use when it comes to this kind of thing. Is Flash Catalyst CS5 more suited to this?

Cannot open Catalyst (FXP) files when the project reaches a certain size!

Hi,
I am a UI designer working for Playstation and have recently downloaded the trial of Flash Catalyst in order to test the validity of using it for game UI prototyping. This has worked well for me up until a week ago when I attempted to open the project file I had been working on and it simply does not open - no error message or anything, it just sits on the progress screen and never manages to open the file! I have left this for many hours in the hope that it might open and have tried multiple times to no avail. Has anyone else encountered this problem? If so can anyone help me salvage the file? I'm gutted as this amounts to a weeks worth of work so if anyone can help I'd be extremely grateful!
Cheers,
Mark

Hi Chris,
Unfortunately I didnt make any backups
I have tried to open the file in Flash builder but it automatically loads flash catalyst as normal then fails to open. Is there a way of loading it in builder without loading catalyst? I'm not really familiar with builder so have just downloaded the trial. Tried importing the fxp file but cant find an option to do that.

Firefox is crashing when I load above a certain number of tabs, and the crash reporter is failing to report it. At certain times I can't distinguish, this results in a BSOD too.

I keep restarting a session on my other firefox profile, because it includes posts I haven't finished writing or want to post, but after an indeterminate time firefox either:
# Hangs intermittently (3 minute-ish hangs with 30 second unhangs) and gets shut down by windows.
# Shuts itself and brings up a crash reporter, which then fails to send the information.
# Causes blue screen of death.
My suspicion is that the failure is caused by memory issues, as I can run this one no prob. Particularly, perhaps unwisely, I didn't stop opening new pages when it started crashing, and that seemed to cause it to crash faster.

I think you may have pasted the wrong thing into the Description.
To try and resubmit a pending report (for example if you lost your internet connection):
#Go to about:crashes in the location bar
#Click the latest report link to resubmit it
If there isn't a pending crash report listed, I'm afraid you may be out of luck for that crash report.

Have a problem in Numbers with entering data directly into a cell when a table reaches a certain size and special characters are used?

I am creating a list of words with special characters in some of them. I get to a point where I cannot enter data directly into the cell. I have to use the data entry bar at the top in the toolbar. Any solutions available?
This is the table I am creating...
From row 25 on, I am only able to enter data into the cell through the toolbar at the top and not directly into the cell itself. I believe that this problem originates from the special characters I have inserted in the previous records because if I do not use special characters, then the spreadsheet acts flawlessly. Have there been issues in Numbers with data entry, the size of a table, and using special characters?

I would try removing the rows with "special" characters one at a time to see which one is causing the problem

Recycling IIS Application Pool when processor load reaches a certain %

Similar Messages

Maybe you are looking for