Red Giant Denoiser II not working with certain clips

HI all,
I have a 25 minute wedding video that I have been unsuccessfully trying to export and sign off on nfor the last week and the problem seems to lie with Denoiser II. There were some clips that were corrupted by me using Denoiser on them so I had to take the effect off. However I am also having a problem in that the denoiser effects seems to 'flicker' during clips - ie it works for a second, then stops so noise appears, then works again for a second, then stops etc etc. The footage was shot on a dslr, 24fps. I shot a short film with the same clips and used denoiser a few weeks previously with no problems. The only thing that differs is the amount of other effects I am using with the footage - Colorista II, Mojo and Magic Bullet Looks. Could the problem be that I have too many effects running?
I can't view my footage in Premiere as my computer can't play it due to the effects I have on it so can't comment on whether the problem is happening in playback and export, or just when i export
I have tried exporting in h.264, mpeg etc. I have also tried exporting through Encoder rather than Premiere, again with no difference and am getting so frustrated.
Im on Premiere Pro cc and Windows 8
Any advice would be much appreciated
Thanks!
Tony

Hi Tony,
Make sure you have installed the most recent version of that plug-in. You might also want to contact Red Giant Support: http://www.redgiant.com/support/
Thanks,
Kevin

Similar Messages

Shift keys on thinkpad twist not working with certain keys

My shift keys stopped working with certain keys. asdfjkl;'zxcvm,. Those are the letters and symbols that my shift key stopped working with. Any help is greatly appreciated.

Okay, do the following.
1) Go into your control panel. You can get into this by either pressing Windows key + E, or search for control panel in the 'Search' box.
2) Now select View By, and choose 'Large Icon' or 'Small Icon', which is on the top right corner of the Control Panel screen.
3) Select 'Ease of Access Center'. Or you can skip step 1 and 2, by directly typing 'Ease of Access Center' in the search.
4) Select 'Make the Keyboard easier to use'.
5) Make sure you unselect 'Turn on Filter Keys' option.
3)
Regards,
Jin Li
May this year, be the year of 'DO'!
I am a volunteer, and not a paid staff of Lenovo or Microsoft

Print function is not working with certain websites, specifically PNC bank

When trying to print on specific websites, all that is printed is a blank page, no content. This specifically happens on PNC website, but has occurred on others as well.

Hi vermontgolfer,
I am sorry to hear that the printing is not working for this website. If you go to about:permissions and look for the website name you can check to see if there are any saved preferences that may be causing this.
Since they are printing blank pages, please make sure that you have updated to version 29.0.1 as this was a bug in pdf.js that was fixed with this update. If you are not using pdf.js you can reset the printing settings with these references: [[Fix printing problems in Firefox]]

Audio data not loading with certain clips. Premiere Pro CC 2014, using .mts files

When I open a project, sometimes a clip will not load its audio data. In the photo I've attached, you can see the video clip on the right has the waveforms showing up, but not for the clip on the left. Rendering does nothing, I've tried clearing Premiere's cache, and I've signed out and back into Creative Cloud as I saw in another forum post with no success...any suggestions?

Right clicking, and selecting "make offline" then re-linking the media seems to work. Thanks! Just weird how this happens sporadically with different clips in different projects when I open them.

CFIMAGE not working with certain JPG

Hi all,
Got an emergency here, hope anyone can help.
I find that more and more people are encountering problems using CFIMAGE -- no error is thrown when reading/saving certain jpg images, but the result image is just blank and gray.
The code is just simple:
<CFSET IM=ImageRead("C:\DSCN1570.JPG")>
<cfset ImageResize(IM,300,200,"highPerformance")>
<cfset ImageWrite(IM,"C:\DSCN1570-2.JPG")>
or even just:
<CFSET IM=ImageRead("C:\DSCN1570.JPG")>
<cfset ImageWrite(IM,"C:\DSCN1570-2.JPG")>
This happens after applying the latest hotfix for 8.0.1 (Cumulative Hotfix 2 for CF 8.0.1). If this patch is not installed the processing works.
Attached is an offending file. The code works if i replace the file with another jpg.
Any help is much appreciated. I'm running CF 8,0,1,195765 devt edition on Windows XP and my java version is 1.6.0_04. My metadata-extractor is 2.3.1.
Thanks,
Andrew

Yeah, sorry: missed the bit - that BKBK pointed out - about you saying you did some testing. To be honest, I would never release code into production without load-testing it first. Especially something that's perhaps already red-flagged as being a risk. Of course there was no real reason for you to think that the previously fixed issue had been regressed. So not - perhaps - a red flag. maybe just an amber one.
I don't believe load testing is a "nice to have", it's essential. In the past I just slapped my code into production after a bit of a click round to make sure it all seemed to work. Then we released some code which worked fine whilst only one person was accessing it, but had some severe logic flaws in it which made it fail - in a data-destroying sort of way - which caused us an awful lot of issues with the client (which in turn got me shouted @ by the boss), not to mention wasted time fixing everything.
That lead me to investigate whether we could have found that sort of thing had we load-tested: yes. Easily. Lesson learned. It also turned up a few other things we didn't notice which were easy tweaks which improved the performance of the app, and made the client happy again.
But anyway, that's just something to think about for future reference, I guess. I fully understand what you mean about time constraints often preventing one from taking the perfect foolproof approach to things: we've all done that. Just sux you got caught out by it.
As for bringing it to Adobe's attention... go here: http://cfbugs.adobe.com/cfbugreport/flexbugui/cfbugtracker/main.html.
It'd help if you could contrive a stand-alone test rig that can be made to fail under load.
Adam

Lightning to VGA Adapter not working with certain apps

I've recently noticed that I can't watch movies on Netlix any more with my Lightning to VGA Adapter going to an LCD monitor. It works just fine with other apps just not Netflix. Apple says it is a Netflix app problem, and Netlix doesn't want to admit it's anything wrong with their app. Any one else have this problem? Is there a solution?

lightning to 30 pin adapter vga
First match (ignore the ad)

Sender FTP Adapter not working with certain name

Hello,
We're facing the next problem within XI.
We configured a sender FTP adapter within the central adapter engine. This adapter is configured correctly however for some reason it is not picking up any file from the FTP server.
Changing status to inactive-> active again all kinds of modes and configs we tested.
However when copying this non-working adapter to a new one with a different name (Configuration is exactly the same!!!!!) and use this one in the sender agreement it worked immediately.
Somebody else faced similar problems and managed to solve it because for this error we don't want to adjust our naming conventions....
Thanks,
Emile

Hi Emile,
This could happen when AE cache is not getting updated.
Goto SXI_CACHE.
Click "Goto" -> AE Cache and check if you get a green symbol with a message saying " Cache contents are up-to-date".
Regards,
Anish

Safari not working with certain sites

Not sure if this is related to the Java issues posted but i just upgraded to safari 4.0.1 and sites that worked before do not now. eg. try http://www1.parknshop.com/WebShop/DeliveryDetails.do;jsessionid=Iaded68owLIVUKAj LPJq2rfCD32wI1yDld0aLztDN7bQfohwQsk2!817254534. you can log on but when you actually try to shop and add things to the basket it doesnt work. if you keep hitting "refresh" then the images start to pop up but obviously cant keep doing this. all worked fine in safari 3.

I don't know if you are still having the problems or not but I have fixed them on my Macbook. The problem was a Java issue and not Safari. I guess the Java update and Safari 4.0.1 updates were installed at the same time on my machine. I did an archive and install then updated everything except Java and Safari. At that point, with Safari 3.2.3, everything worked like it should. So I installed the Java update and Safari 3.2.3 was still working like it should. So I installed Safari 4.0.2. Still working like it should. I did find some information after I did the archive and install that said reinstalling the Java update can possibly fix the problem. So I would try that before doing anything else. The Java update can be found here.
Eric S.

CS5 Master collection is partly not working with certain programs within the program

Some of the programs in CS5 Master collection aren't working. but some are. When I open the onse that don't they actually try to but then "Stop working" and crashes. I even tried to re-install the whole thing again but it says that some files are not in the same place. Whats does that even mean?.....

The best option would be to uninstall it completely using Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6
Then reinstall it, you should be logged in as administrator with complete privileges.
Regards
Rajshree

Screen Sharing, audio, and video chat not working with certain people

My ichat application will suddenly stop working after just a few seconds of starting wither screen sharing, video chat, or audio chat. I get the error message "No data has been received for the last 10 seconds." How do i go about fixing this?

Hi,
This message can be caused two ways.
1) a loss of Internet Connection through a Physical means.
(turning Off Airport card, Pulling out Ethernet Cable, modem or router failure, loss of service from ISP)
2) A router or modem Software intervention.
This most commonly happens in Video chats. The device has a feature called DOS (Denial of Service) which with modern Internet Speeds and Video Streams gets to the threshold where it cuts in. It requires that you turn the feature Off as there is not adjustment in the threshold at which it works.
A similar feature with a similar result is SPI (Stateful Packet Inspection).
Having said that, it very unusual to have it effect Audio only chat or Screen Sharing.
This means the issue could be at the Buddies end.
NOTES:
iChat creates Logs of Connection Failures of which there are about 5 types, caused by various issues in the connection Process.
The 10 Sec Error message covers those things where the connect End but iChat did not receive a "BYE" message (a controlled End to the Chat) or get a failure of another sort.
Basically you were connected properly (even if you did not hear or see the Buddy) and so other event cut the connection that was not iChat related.
Can you do Video chats with any of the 6 names in Table 1 ?
http://www.ralphjohns.co.uk/ContactTesters.html
Some of those will respond to Audio Only invites.
(I just tested 4 of them and three play music and one the Audio form the Jonathon Ive Video)
Do any of those work ?
That will exclude a Modem or Router Issue with DOS or SPI on the remote end.
9:29 PM Wednesday; June 9, 2010
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
Message was edited by: Ralph Johns (UK)
I may receive some form of compensation, financial or otherwise, from my recommendation or link.

Why does Create PDF from Web Page not work with certain URLs?

I'm creating a large number of PDFs from Web Pages on Adobe Acrobat XI Pro and occasionally come across certain URLs that fail to generate a web page. The process begins as normal but eventually the status window lists a few errors or canceled processes and that there are now 0 Connections Active. This only occurs for certain URLs, but when it happens it consistently fails for that URL (as in trying it a few mroe times doesn't let it work). Is there any specific reason this happens or a way I can prevent it? The above example is of a URL that fails to generate a PDF :
http://www.pcmag.com/encyclopedia_term/0,1237,t=access+point&i=37393,00.asp

I tested this in Acrobat X and the exact same issue occurs
http://www.quantumdynamix.net/clients/image-map-test/ImageMapTest-AcrobatX.pdf
This has to be considered a legatimate bug, especially since IMAGE MAPS is listes as one of the supported HTML features via the help files

AddChild not working with library clip (attachMovie AS2 migration)

Hello,    I'm having a problem adding a library clip to my stage
I can do no problem if I have a testFLV.fla that has a library clip called test_clip with the linkage set to: com.attach_clips.Clip.
import com.app.views.mediaDisplay;
import com.attach_clips.Clip;
public class FLVTest extends Sprite
    private var _mediaDisplay:mediaDisplay;
    public function FLVTest()
        this._mediaDisplay = new mediaDisplay(null);
        var clip_1_mc:Clip=new Clip();
        var clip_1_mc:Clip=new Clip();
        this.addChild(clip_1_mc);
        clip_1_mc.x=100;
If I use the same concept in my mediaDisplay class, the clip isn't added to the stage.   Obviously it's got to be a scope issue since 'this' in the first example
represents the .fla itself but in mediaDisplay this doesn't have a stage object.
package com.app.views
    import flash.display.Sprite;
    import com.attach_clips.Clip;
    public class mediaDisplay extends Sprite
        public function mediaDisplay(attachControls:Sprite)
            var clip_1_mc:Clip=new Clip();
            this.addChild(clip_1_mc);
            clip_1_mc.x=100;
Any ideas how I could 'attach' test_clip to the stage from mediaDisplay?
Thanks,
Clem c

I've done away with all references to Clip.    Now, everything references test_clip.    Also, FLVTest contains the actual test_clip library symbol.
Class FLVTest instiantates and instance of mediaDisplay which, for now-in the constructor, attempts to add an instance of test_clip to the stage.
As far as adding FLVTest and mediaDisplay to the display list - I'm not sure that this is relevant to the situation?
at the moment, the current code looks like this:
FLVTest.fla:
public class FLVTest extends Sprite
    private var _mediaDisplay:mediaDisplay;
    public function FLVTest()
        this._mediaDisplay = new mediaDisplay();
package com.app.views
    import flash.display.Sprite;
    import com.attach_clips.test_clip;
    public class mediaDisplay extends Sprite
          public function mediaDisplay()
               var clip_1_mc:MovieClip=new test_clip();
               this.addChild(clip_1_mc);
               clip_1_mc.x=100;
               clip_1_mc.y=100;
And the linkage in test_clip:
Class:   test_clip
Base Class:   flash.display.MovieClip
Thanks for all your help so far by the way!

My DVD player does not work with some DVDs

My DVD does not work with certain DVDs. Do I need to get it replaced or is there some other problem.

Could it be that they're out-of-region DVDs? Which model MBP do you have (15" late 2011, for example) and which version of OS X are you running?
Clinton

CISCO Box not working with Infrared Remove Control Repeater

There was an Infrared Remote Control Repeater set-up in my newly purchased house. It works for my LG DVD player, but does not work with my CISCO CHS435HDB box. Are there any work around for this? Should I change to a different box?

If you are using a repeater, make sure the piece that is relaying the IR signal is pointing directly the font of the Cisco box and nothing is plugged into the IR input port in the back of the box.
Anthony_VZ
**If someones post has helped you, please acknowledge their assistance by clicking the red thumbs up button to give them Kudos. If you are the original poster and any response gave you your answer, please mark the post that had the answer as the solution**
Notice: Content posted by Verizon employees is meant to be informational and does not supersede or change the Verizon Forums User Guidelines or Terms or Service, or your Customer Agreement Terms and Conditions or plan

Layout adjustment not working with tables

Hi all
Why will layout adjustment not work with tables?
I am trying to re-format from A4 landscape to A4 portrait.
The text box containing the table will resize but not the table.
Any clues why this might be, I don't want to manually resize every table in the document.
Many thanks,
Rob

Thanks Jongware,
Having resized the table and got the little red ovals, I tried various things like changing the font size etc but the best workaround I found was to select the table and change the cell inset value to 0, this got rid of all red ovals and I didn't need to change the font size.
Cheers,
Rob

Red Giant Denoiser II not working with certain clips

Similar Messages

Maybe you are looking for