Red is not working in Ps

I can not get the back to be red. It turns this color for the life of me. How do I fix that. Every other color by red works.

What is the Mode of your image?
Having one color NOT work is highly out of the ordinary.
Also, how are you trying to change the color of the background?
Good luck,
Hunt

Similar Messages

  • NOKIA 202 RED BUTTON NOT WORKING

    I JUST TURNED OFF MY PHONE 202 AND  after some time i try to switch on that phone but red button not worked  and other keybuttons works good and i try flash the phone but it says remove cable and batery and put cable and put batery and power on but funny thing is my red button not worked and i just got dull finally i am asking you guys is there any solution to power on i try almost all key board tricks i.e * 3 gren red etc  or a software to power on.MY NOKIA 202 RED BUTTON NOT WORKING 

    Hi, DEVRAMP. How did you flash your phone? Is there a battery indicator when you charge it? You may try the following solution below:
    Check that the keypad is not locked.
    Make sure that all keys are responding correctly when they are pressed. In some cases, a key may get stuck and freeze the whole keypad.
    Try removing and replacing the covers (if your phone supports that feature). Check that the power and side keys on the cover are properly aligned (e.g. pushed out) to their respective positions to have a proper tactile feel when pressing the keys. 
    Keep us posted. 

  • Nokia 5530 XM Touchscreen (red button) not working...

    I bought my nokia 5530 for about 4 months and i had dropped it a couple of times..
    But before that it did not experience any serious damage.
    It was until recent i accidently dropped it AGAIN and i found out that the red button is not working anymore.
    Is there any solution to fixed it??
    Thanks in advance for any help..

    If you want to try something yourself, Dial this code as normal phone number *#7370# enter your lock code default is 12345. (BACKUP DATA FIRST)
    BUT
    it seems a hardware problem,and i suspect what i suggested above won't help So visit your nearest Nokia Care Point and have it checked:
    http://europe.nokia.com/support/repair-and-recycle/repair/care-points
    Previous Phones: 6600, 7610, 6230, 6230i, 1100, 1112, N70, N73, N95, N95 8GB, 5800XM, 5230, C5, iPhone 3GS, SE Xperia X10, N900, N8, SE Xperia Arc
    Current Phones: Nokia N9, iPhone 4

  • Why does my phone screen flash red an not work??

    why does my phone not work an keep flashing red??

    Is the computer closing down and restarting whilst left unattended ?
    Is the computer running other tasks in the background eg downloading, security upgrades/scans, or disk indexing ?
    Have a look at
    *[[Firefox hangs##w_hang-after-prolonged-use]] - after prolonged use;
    * and note suggestion to use session restore feature to prevent this

  • X2-01 red key not working

    Hey the red key on my X2-01 has stopped working all of a sudden. The phone was not dropped or wet. Only that key does not work. Can someone pls tell me what i should do to get it working again
    Solved!
    Go to Solution.

    Can you turn off phone and remove battery and try again first?
    If  i have helped at all a click on the white star below would be nice thanks.
    Now using the Lumia 1520

  • MY PAGE IS ALL RED , flash not working w/ chrome

    when i go on a page it shows all red, no pictures work, but when i go to the adobe site it says i have the latest version installed... please help m! thanks

    This forum software is very tricky; updates to forum posts sometimes need to be done three or four times until it "takes".  I have been able to update your original post.
    Now that it is actually readable, I will go and have a look at it.

  • Why is the LookUp object in the Flow Task of my SSIS package going red (and not working) ? Sql Server 2008 R2

    I have been working with the Sql Server 2008 R2 SSIS Tutorial at
    https://msdn.microsoft.com/en-us/library/ms170419(v=sql.105).aspx
    --specifically -- Lesson 1.  I have been having some problems with this lesson where the source data from the samples download doesn’t exactly match the data described in the tutorial, and the tables in the tutorial are different from what
    is contained in AdventureWorksDW (tutorial refers to DimTime – AdventureWorksDW contains DimDate and no DimTime).  
    So, after futzing in BI with this tutorial  so that I can at least get it to run in Debug – it errors out on the 2<sup>nd</sup> LookUp object.
    Rather than looking for a fix to the problem(s) that I am having between the tutorial and the stuff I downloaded in the samples --
     I want “Adapt” the tutorial so I can use the stuff I downloaded and hopefully learn how to use SSIS with the elements (source data and tables) that are present on my workstation. 
    Here is a description of what is going on for me – which I really don’t understand what is going on in BI – based on the images below – like what columns (from what tables) are they associating to in the OleDB Destination? 
    Note:  the sql in the LookUps here is the sql that I copied from the tutorial. 
    I probably need to modify these sql statements – so -- the help I am requesting is to make the required modifications/changes
     so that I can adapt this tutorial with the stuff that’s on my workstation.
    I downloaded the samples and the AdventureWorksDW mdf for Sql Server 2008 R2. 
    It turns out that in the tutorial it wants me to select a DimTime table, but the version of the AdventureWorksDW db does not contain a DimTime table. 
    Instead, it contains a DimDate table.  So I tried adapting DimDate for the tutorial. 
    Additionally, the sample data file -- SampleCurrencyData.txt -- has slightly different data types than the types described in the tutorial, so I selected data types for the columns in the datasource text file that would work in BI would to
    connect column from source data file to the table.
    After finishing all the steps for Lesson 1 -- when I tried debugging the package – and it error'd out on  the 2<sup>nd</sup> Lookup object whichwent red.
      I edited the lookups and the sample Ole DB Destination to "ignore on fail” and I did all
     green but the FactCurrencyRate table is not being populated -- as described in the tutorial, so I reset the on error back to default (Fail on error option).   And based on this tutorial -- I believe FactCurrencyRate
    table is the table which is supposed to be populated with the data from SampleCurrencyData.txt?
    In the sample data file that downloaded with all the samples  I removed all the data from the text file except for 6 rows, so instead of the original 1100 or so rows, I have only 6 rows of data in the source data file (just to keep things
    simple for debugging for now).  I did not modify the data itself. 
    Here is what the (raw) data contained in SampleCurrencyData.txt looks like (from the samples that I downloaded from codeplex) – it’s supposed to be 4 columns of data – float, nvarchar, datetime, float:
    0.281690141       USD      
    6/26/2004 0:00  0.281713948
    0.281690141       USD      
    6/27/2004 0:00  0.281642539
    0.281690141       USD      
    6/28/2004 0:00  0.281761573
    0.283286119       USD      
    6/29/2004 0:00  0.283221933
    0.283286119       USD      
    6/30/2004 0:00  0.283358363
    0.281690141       USD      
    7/1/2004 0:00     0.281682206
    Below are images of my BI Layout for Lesson 1 from this tutorial -- the FlatFile and configurations for On Fail Error, A Flow task, the 2 LookUps (CurrencyKey and DataKey), the OleDB Destination configuration, the Design view of the associated tables and
    the Debug Run of Lesson 1, and the following error messages. My goal is to figure out what is going on in BI for this tutorial.
    Error: 0xC020901E at Extract Sample Currency Data, Lookup Datakey [51]: Row yielded no match during lookup.
    Error: 0xC0209029 at Extract Sample Currency Data, Lookup Datakey [51]: SSIS Error Code DTS_E_INDUCEDTRANSFORMFAILUREONERROR. 
    The "component "Lookup Datakey" (51)" failed because error code 0xC020901E occurred, and the error row disposition on "output "Lookup Match Output" (53)" specifies failure on error. An error occurred on the specified
    object of the specified component.  There may be error messages posted before this with more information about the failure.
    Error: 0xC0047022 at Extract Sample Currency Data, SSIS.Pipeline: SSIS Error Code DTS_E_PROCESSINPUTFAILED. 
    The ProcessInput method on component "Lookup Datakey" (51) failed with error code 0xC0209029 while processing input "Lookup Input" (52). The identified component returned an error from the ProcessInput method. The error is specific
    to the component, but the error is fatal and will cause the Data Flow task to stop running. 
    There may be error messages posted before this with more information about the failure.
    --this is the flat file
     -- SampleCurrencyData.txt (which only contains 6 data rows for my purposes)
    --and here is where I assign the data types for the colums of -- SampleCurrencyData.txt
    This is the first LookUp Object -- LookUp Currency Key – The DB contains DimCurrency table. 
    I copied the sql from the tutorial here.
    I actually have a DimCurrency table in my copy of AdventureWorksDW. 
    Here’s the design view of DimCurrency and a sample of the data contained in DimCurrency and the On Fail configuration
    I actually have a DimCurrency table in my copy of AdventureWorksDW. 
    Here’s the design view of DimCurrency and a sample of the data contained in DimCurrency and the On Fail configuration
    --Here is what the data looks like in the DimCurrency table
    --2<sup>nd</sup> LookUp object  -- LookUp Data Key – this is the LookUp
     where BI errors out on Debug
    --it appears this lookup is referencing the DimDate table – which I DO have in the DB.
    --I can’t find the following sql in the tutorial, so I suppose BI added the sql (did it?)
    --Here's how I configured for On Error
    --Here is DimDate table in Design view
    --Here is a sample of the original data contained in DimData
    OleDB Destination
    --Here is where I get lost a bit – what is going on in the destination here?
    --Here's my On Error configuraino
    --and here is the FactCurrencyRate table
    --and here is a sample of the data contained in FactCurrencyRate
    Rich P

    Thank you for your reply.  I changed the error handling as you suggested on the 2nd lookup to redirect to unmatched rows.  Now I get all greet.  I don't have the conditional split as in your diagram.  But also, nothing appears to have
    happened in the DB.  Aren't the rows in my text file supposed to be added to the FactCurrencyRate table?
    How do I get a conditional split?
    Rich P
    OK, sorry I forgot to reply you back.
    Conditional Split was just dummy task. Ignore it.
    Manipulate the data in such way that you get matching records.
    Inside Source, for first 2 rows I put the dates which are available in DimDate.
    1.00010001,ARS,7/1/2005 0:00,0.99960016
    1.00010001,ARS,2/5/2006 0:00,1.001001001
    1.00020004,ARS,9/5/2001 0:00,0.99990001
    1.00020004,ARS,9/6/2001 0:00,1.00040016
    1.00050025,ARS,9/7/2001 0:00,0.99990001
    1.00050025,ARS,9/8/2001 0:00,1.001001001
    Then in OLE DB Destination, I loaded the rows to TestFactTable.
    (Now, you don't even need NO MATCH OUTPUT as there are matching records here)
    Cheers,
    Vaibhav Chaudhari
    [MCTS],
    [MCP]

  • Red highlights not working Camera Raw 8.8

    I'm on a imac & just downloaded Camera Raw 8.8.  The red highlights do not show up on blown/over exposed areas.  I have clicked it on & off.  Someone mentioned holding down the alt button while clicking exposure or highlights slider & that worked initially.  But now that doesn't work either.  How do I fix this?

    Thanks Benjamin!  I just tried that & the highlights are showing up, but not like they did the older version I had.  I've opened the same picture in both versions.  In 8.8, it has to be drastically overexposed for highlights to show, but there is a ton of area where they don't show.  In the 5.0 version, it showed immediately upon opening the picture.  Is this the way 8.8 is supposed to be or is there something wrong with mine?

  • Red-eye not working right

    I have a friend who's Macbook is acting a bit weird. In iPhoto 08 if you try to edit the red eye, after a few photos it'll starting doing one eye okay (the left) but then completely miss the other one, putting a black splotch above the eye or to the side of the eye. It's not because of aiming incorrectly.
    Also although this isn't the right place to post, iMovie 06 won't let her edit the audio in timeline view. The little markers that enable you to drag the volume down aren't there when you click, for some reason. Not major things but little bugs...
    All the latest updates have been installed and I've also done things like deleting the plist and even done an Archive Install for her but iPhoto red eye still doesn't work right. Haven't checked iMovie 06 yet but maybe will tomorrow.

    Have you run the latest updates for the iLife 08 apps? If so reinstall iPhoto and update the the lastest, 7.1, followed by a repair of disk permissions.
    Do you Twango?
    TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
    I've written an Automator workflow application (requires Tiger), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. It's compatible with iPhoto 08 libraries. iPhoto does not have to be closed to run the application, just idle. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.

  • New OSX not does not work with RED Rocket Card and old OSX Randomly Logs Out - UNSTABLE

    It looks like my MBPR 16GB (MacBook Pro) randomly logs out and causes my programs to quit unsaved.  I can not update to the new OSX mountain Lion because the new Apple release is no longer compatible with the RED Rocket card needed for debaying RED Scarlet footage.  Mountain Lion causes the RED Rocket to not run correctly with Adobe Premiere. 
    At the same time, I am on Lion and my computer randomly logs me out and I lose all my work.  It seems as though the Retina is unstable. 
    Any help would be greatly appreciated.  Can someone tell me how I can return this.  It seems as though I may have to switch the entire company over to PC if this is not figured out soon. 

    You probably have not received responses for two reasons.
    1. There are not many here that know what this is "RED Rocket card needed for debaying RED Scarlet footage"
    2. Your post appears to contain some sort of threat to Apple about moving to PCs. You are not addressing Apple here. We are users just like you. We don't care if you change over to PCs.
    MBPs and Lion are very stable. Maybe your unsupported third party Red card is causing issues. Their answer seems to be that Mountain Lion is not supported. I wonder why?
    My suggestion if this is a business environment is to not mess with this. If you know for a fact that your Red card works with PCs, change over to PCs. I know that if some tool was not working for my business I would not hesitate to get something that worked.

  • Greetings, I am working in Final Cut Pro 7. In the timeline some clips show as offline. I tried going to sequence and reconnecting to media but it does not work. I can still see the video in the timeline and work with it. It just has the red box.

    Greetings, I am working in Final Cut Pro 7. In the timeline some clips show as offline. I tried going to sequence and reconnecting to media but it does not work. I can still see the video in the timeline and work with it. It just has the red box. Thanks! Olga

    If the clips are not actually missing, you could try to refresh the timeline by using cmd-0 and then going to the timeline options tab. Then select name only where it says "thumbnail display". Press ok to accept the change, then repeat the process to add thumbnails back to your timeline.

  • My sons ipod classic was left on all day and now has a red circle with a cross in it and will not work

    my sons ipod classic was left on all day and now has a red circle with a cross in it and will not work - nothing we do will make it work - any ideas??

    Try to restore the iPod. Here's an article that provides troubleshooting for it.
    http://support.apple.com/kb/TS1463
    If that doesn't work visit an Apple Store and see if they can replace it.

  • The music on my iPhone 4 with the new ios7 is not working. There are red  dots next to the selections and I can  not here any music when I touch the  spots. I just downloaded the iOS 7. What went wrong?  Everything else seems to be fine

    The music on my iPhone 4 is not working. There are red dots next to the selections and no sound occurs when they are touched.

    Can you play those songs in iTunes on your computer?
    Make sure they are all part of your iTunes library before you sync and that they were bought with the same AppleID you use on your phone.

  • Headphone Jack Glowing Red, Internal Speakers Not Working...

    Hey, I have a 2.0GHz White MacBook (almost a week old), and I just recently came across this problem (this morning, actually). I usually have my MacBook connected to some external speakers through the headphone jack, the internal speakers are pretty terrible. Anyway, last night I left the computer on playing music as I fell asleep, this morning I woke up and the computer must have some how come unplugged from the AC power, as it was dead. I plugged it back in and everything was fine (I mean, it had to charge up, and the battery 'health' in iStat Pro was down to 93%, also not sure what this means... But everything else was fine). Then, I unplugged my external speakers and the jack was glowing red, I believe there's an LED inside. The internal speakers would then not work.
    I did a quick Google search and discovered that this problem had been experienced on MacBook Pros. Someone recommended plugging in a set of headphones, I did so and then unplugged them and the internal speakers worked for a moment. I plugged in the external speakers again, and they worked (and work) fine. The problem is with the internals, they don't work, and plugging in my headphones again has not solved the problem, and the light is still on when the jack is not occupied.
    Any ideas?
    [edit] As of this writing, they are currently working, after plugging in the headphones again and unplugging them, however, the light still blinks when I do this, and there is a bit of a hesitation between the headphone being unplugged and the internal speakers kicking in... (longer than normal, I know there was always a slight delay, but this is a few seconds of blinking light and no sound).

    you can fix this by "cleaning" the audio jack. the computer thinks that a digital output is connected. if you go to sound under system preferences, and it says digital output rather than internal speakers, then this is the problem.
    I used a tightly rolled up piece of toilet paper to clean the jack. I twisted it up, stuck it in the jack, and then moved it around for a while. the red light went off and my internal speakers started working. someone else used a toothpick.
    also, before i fixed this, i couldn't turn the volume up or down (unless i was using headphones) and the volume level screen that shows up on the screen had a circle with a line thru it...like the no smoking signs, but small and just under the volume bars.
    http://discussions.apple.com/thread.jspa?messageID=3700681&#3700681
    good luck

  • My iphone 6plus not working not charge but when i run it the first time working half an hour  when you attempt to run it again light up thr screen and showws the apple logo and after the pice screen illuminates red and does not work what do i do now

    My iphone 6plus not working not charge but when i run it the first time working half an hour  when you attempt to run it again light up thr screen and showws the apple logo and after the pice screen illuminates red and does not work what do i do now

    Hello Nadersalah,
    It seems you're experiencing multiple issue with your iPhone. Based on the information you have provided, it appears your iPhone needs to be serviced. The following link should help you get started with the process and has links with additional information on topics such as warranty and service pricing, battery replacement, and express replacement service.
    iPhone Repair and Service - Apple Support
    Thank you for contributing to Apple Support Communities.
    Cheers,
    Bobby_D

Maybe you are looking for