Redetermine the exchange rates during the billing.

Hi
I would like to redetermine the exchange rates during the billing.
When we are creating a sales order we are maintaining exchange rate in sales order header, but in case of any change in rates
I have to change it in sales orders first and then i have to create an invoice. Instead of doing this i would like the exchange rates
to be redetermined during billing automatically.
Please help
Suresh

Hi,
      Firstly let us know If you want to redetermine the pricing exchange rate or the exchange rate to accounting? I imagine that the pricing exchange rate you are talking about ,the pricing exchange rate type should definetely work no matter  what the  pricing source is . Normal sales cycle always has the price source as order, which controls from where and in what sequence the conditions from the reference documents are copied to the billing document. It does not control the exchange rate. Check the billing date in your sales order(its always advisable to take the service rendered date as the base to calculate the exhcange rate which is PGI date when a delivery is involved) , not the actual billed date. If you want the system to determine the exhcange rate on the date when the Invoice has been raised(Different from the billing date in the sales order) then go for the option of "E" which will take the service rendered date.
But If you want the exchange rate for accounting then you have to append a routine at the item level in "VTFL" .The Logic would be to read the exchange rate from TCURR table using the function module "READ_EXCHANGE_RATE. If you have specified the exchage rate in the header(Accouting tab) of the sales order this gets copied to the billing document This is SAP standard behaviour. To over write this you have to go for the routine ammendment as suggested above.(In case of billing dates and the exchange rates differ). Kindly please let me know If you need any more help on this.
Regards
Ram Pedarla

Similar Messages

  • Edit the exchange rate during LIV

    Dear all,
    I created a import PO in which the exchange rate is not fixed. When I try to post the invoice in MIRO against this import PO the exchange rate in the details tab is non editable ie. grey. Ideally the exchange rate shall be editable unless it is fixed in PO. ( The fixed indicator in PO is ticked)
    Will you pls help me out?
    Regards.
    Milind

    Hi Milind,
    Once you enter the PO no system programatically makes the field non editable. Even in SHD0 you cannot change this setting. This is because at the time of entering the PO system normally takes the exchange rate from the table in FI. If entered before it by pases the rate maintained and calculated on the value maintained.
    Re transaction SHD0 : Give the transaction as MIRO and the transaction variant as ZMIRO and press on create button. Then start the recording and select the fields you may use and give the selection i.e mandatory, display etc and finally save the recording. This variant will have to then be made active and there on system will work with Zmiro variant insterad of standard. This is easilt done without help of ABAP. Hope it is useful.
    Rgds
    Janardhanan

  • Investigation on the problem why the exchange rate in the invoice is not u

    Hi,
    Informed by customer that the exchange rate (HKD-MOP) of ULP has been changed to 1.0309 from 1.03 since 26 Aug. The corrected exchange rate should be 1.03
    Would you do the investigation on the problem why the exchange rate in the invoice is not updated?

    Hii..
    In T Code OB08 Update the Exchange rate that is applicable from the date which you want.
    Regards,
    Aakash

  • User-Exit to change/Calculate the Exchange Rate

    Hi ALL,
                 I am looking for an user-exit that can be used to change the Exchange Rate during the billing cycle. I want to claculate the exchange rate based on the translation date (BKPF-WWERT).
    BR,
    Tanmoy

    Hi ALL,
                This is a very tricky issue.
    The table BKPF has a field called WWERT (Translation Date). Now we want to calculate the Exchange rate based on the translation date. The table BSET has two fieds LWSTE (Tax Amount in Country Currency) &
    LWBAS (Tax Base in Country Currency)  and they must get updated with correct values based on the translation date, but thats not happening as the exchange rate is calculated based on the posting date/billing date. The exchange rate is determined from the TCURR table but its taking the incorrect Exchange rate.  I need to find out the way so that I can correct it.
    BR
    Tanmoy

  • To use GR Exchange rate during IV

    Dear ALL:
    my customer has such request that they want the GR's exchange rate during IV automatically.
    Exchange Rate for invoice matching IR ( at Feb at 2.10 ) should be similar to GRN ( Jan at 2.00 exchange rate ). Customer does not want to fix the exchange rate during the PO .
    They want to pick up the exchange rate when the GR is being executed .Is there any automatic setting to enable this, they want to avoid manually changing the exchange rate during IR.
    Can anyone assist please ? Thanks.
    by the way, do you know which date determine the exchange rate in IV , the posting  date or the document date?

    Think about it once...
    You can do one thing, don't make the PO first...Directly go for the GR and while making the GR make the PO, so that the same exchange rate will be treated at the PO and GR ....now for the IR, GO for the ERS functionality, so that as soon as you make the GR, system will take those GR and PO into consideration for the ERS settlement and IR ie. vendor will be payed with the same exchange rate...
    If you don't want this functionality and then take the help of ABAP consultant to develope a new enhancement for your functionality...
    Hope it helps..
    Regards
    Priyanka.P

  • Determination of current exchange rate in the cancellation billing document

    Hi All,
    I have a requirement which I have described below. It would be helpful if you can mail your suggestions on the below.
    Existing logic in SAP:
    While CANCELLING a billing document(VF11), system copies the exchange rate from the original billing document. The same is transferred to accounting from the header of the billing document. VBRK–KURRF to BKPF-KURSF.
    Change Requirement:
    While CANCELLING a billing document, system should determine the exchange rate based on the current date (Date of cancellation)
    The same should get transferred to accounting.
    Example: Invoice dated 01.01.2005 if cancelled on 15.05.2006; the exchange rate should determine the rate that is valid for 15.05.2006 and not copy from the original invoice.
    So VBRK–KURRF should not get copied from the Original billing document, but it should redetermine the rate based on the current date.
    I need to know if there are any Exits or Bapi's or any kind of customization that I can do for this requirement.
    Thanks & Regards,
    Midhun.
    Ph: +49 1520 4358506

    Hi midhun ,
    This is sai ,
    I dont know whether this is precise solution for your rpoblem or not . but i have an idea regarding that
    If the document is reversed then another document will be created for reversal
    So in document type settings you have an option for using another exchange rate
    regards
    saikumar

  • F110 Only Vendor's position takes the exchange rate from bill

    Good Morning, I have a problem, when I create a pay with F110, in the payment document only Vendor's position takes the exchange rate from bill, others positions take the exchange rate from de payment doc. I want all positions take the same exchange rate (Payment Doc).  I don't know how fix this.
    Example:
    Payment Doc.
                                                  Amount      /   Exc. Rate  /       Amount LC
    Vendor's Position            /       293.97     /     2.812       /       826.64
    Withholding                    /      -17.64     /     2.768       /              -48.83
    Payment                           /       -276.33     /     2.768           /        -764.88
    Exchange rate difference /           0     /                     /              -12.94
    I hope someone can help me. Thanks.
    Regards
    Fernando

    Hi,
    it is the sap std behaviour while creating the PO, picking of the exchange rate from the specified tables and from specified type.Seems you can not change.
    Regards,

  • How to activate the "Set Exchange Rate" field in billing document header?

    Dear All,
    I would like to get the exchange rate at the time of the billing without changing the sales order exchange value.
    The set exchange rate field is grayed off.
    Thanks in adavance.
    Regards,
    Niketan

    Hi,
    This can be achieved using the copy control setting for billing at the Item level. The field is: PricingExchRate type
    and the possible values relevant for you are:
    C     Exchange rate determination according to billing date
    E     Exchange rate determination according to current date
    Hope this helps!
    Thanks
    Siva

  • How to change exchange rate during billing (VF02)

    Respected Members,
    i already created the Billing documents from sales order and it took the exchange rate wat i mentioned in the sales document.
    but still it is not release to accounting .
    So i want to change the exchange rate in change of billing document.
    The pop up box for that field is coming in the display mode and it is not coming in the change mode.
    How to do it.
    Please tell me .
    Thanks a lot.

    Thanks for your replies.
    But i have one querry that is when you go to billing document header there you will see exchange-rate accntg flied and above that there will be one checkbox set exchng rt and by going F1 on it is mentioned that you can give the exchange rate during billing and it can redertmine the value at billing level and also the exchange rate acctng field gives one pop up box same as it gives in sales order ,but here that box is in grey mode and in sales order it is in grey mode and how to bring this box in change mode during billing.
    Please clarify my doubt.
    THanks

  • Wrong Exchange rate on the Contract (ME31K

    Dear Sap Guru
    I am writing to you in order to know if there is a solution to our problem.
    The scenario is quite easy:
    1 u2013 Suppose to insert a wrong exchange rate during the Contract creation (tcode ME31K)
    2 u2013 When you will create the scheduling agreement (ME31L) based on the Contract, the wrong exchange rate will be copied to the SK.
    3 u2013 The GR based on the SK will be valuated to the wrong exchange rate.
    About the point 1 and 3 there is a way to check the difference with the current exchange rate, like a tolerance limit for the Exchange rate?
    About the point 3 is it possible to set the system in order to value the GR based on the current exchange rate instead to use the exchange rate stored in the purchase order.
    Please let me know if you need more information in order to find a solution.
    Regards
    marco

    hi,
    try following sites:
    http://help.sap.com/erp2005_ehp_03/helpdata/EN/3d/60c9d9302611d28dbc0000e82852b4/frameset.htm
    http://help.sap.com/erp2005_ehp_03/helpdata/EN/3a/55b424dae511d3978a006094b969cf/frameset.htm
    Hope it helps..
    Regards
    Priyanka.P
    AWARD IF HELPFULL

  • Asking Exchange rate at the time of Customer aging report

    Dear All,
    I am facing one problem, when I am asking customer aging report the system is asking to enter exchange rate.but at the time of vendor aging is working fine does not asking any exchange rate,this problem happens only one specific  user, not for other users.
    In other users it is working fine.Do we need to do any configuration for that user for working this customer aging report.
    Please give solution as soon as possible
    Thanks advance.
    Regards
    Komanduri.

    We faced the same problem today.
    Finally, we found out the user accidentally selected the currency which we didn't set the exchange rate in the aging report.
    After the aging report is generated, we can change the currency in the upper left corner.
    If we didn't set the rate of that currency, it will keep asking.
    Even if we close the aging report and open again, it  will still ask for that currency before it could generate the report
    When we set the rate of that currency, it will not ask exchange rate again

  • Change the exchange rate of a line item manually

    My company has an issue regarding the exchange rates.  We are in a country using EURO.
    Though from one of our vendor we take prices in USD. In our pricing procedure in the sales orders we post the price of the vendor and in the prices we maintain another condition type for our profit.
    In the case of the vendor price that gives us USD, we have want to give the price in the usd and the system to translate the usd in eur (in the next line of the procing procedure) accourding to an exchange rate that the user will give per line item.
    At the moment the system thanslates the price to eur accourding to the exchange rate from the system (automatically) and I haven't have the possibility to change the predifined exchange rate manually as I want to do.

    Hi,
    Exchange rate are maintained in the T.Code "OB08".
    Goto the T.Code "OB08".
    Change the exchange rate as per your requirement.
    If you want to get different currency then goto the T.Code "XD02".
    Enter your customer number,Company code and sales area.
    Goto Sales area data.Sales tab.
    Change the currency to your value as per your requirement.
    If you create a new order with that customer,then we will get this new currency.
    After creating the invoice,pass the accounting document number into "FB03" and enter the company code and fiscal year.
    Enter.
    Click on "Currency".
    It gives you the value in base currency.
    Regards,
    Krishna.

  • Is it possible to change the exchange rate after completion of miro documen

    Dear sap guru's,
        Please suggest me user can raise an po with account assignment cateagory (asset) ie AUC Asset. at the time they are giving exchange rate is 39.41. after doing migo he setteled the AUC asset to Main asset.
    Month ending he is doing MIRO At this time System is caputuring the exchange rate as 39.58. so the differnce amount is comes under AUC Asset.Already the AUC Asset is setteled but exchange rate difference amount is showing in asset. how do i resolved this one Kindly suggest me this is an urgent issue.
    Regards,
    Kumar.

    Hi Kumar,
    There are two solutions,
    1. At the time of MIRO, you can give the exchange rate in the details tab screen which can be an exchanged rate which was used at the time of capitalisation.  Hence, there will not be any differences between capitalised value and MIRO value.
    2. You can post the difference in the AuC asset and again you can distribute it to an expenditure or an assets based on business process / decision.
    Hope it clears your doubt.
    Regards
    A.Saravanan.

  • Where are the Exchange rates filled in SAP?

    Hi All,
    could anyone tell me where Exchange rates are filled in SAP?
    Thanks

    Hi,
    You can fill the exchange rates in the path in SPRO :
    Path : SAP Customizing Implementation Guide -> SAP NetWeaver-> General Settings-> Currencies -> Enter Exchange Rates
    Click "New Entries" Button for enter a new exchange rate.
    Enter the fields in below table
    -ExRt = Exchange rate type
    -ValidFrom = Effective date of the exchange rate displayed.
    -Ratio(from) = always 1 (default)
    -From = Originating currency for the transaction (e.g. USD)
    -Dirquot = Direct Quotation e.g. 1 USD = JPY.114.06
    -Indir.quot = Indirect Quotation e.g 1 JPY = USD. 0.0088
    This field is not in use and always display "0.00000"
    -To = always 1 (default) this is reporting currency (e.g. JPY)
    Thanks
    Neel

  • Multiple Currencies - Where is the exchange rate?

    Guys, i have configured the Financial Analytics and am wondering where the exchange rates are being pulled from? Lets say my Global Currency1 is EUR and i have data (document or local) in USD.
    Where is it capturing the exchange rate between the two currencies for that duration (month, week, day) when i want to see everything by Global Currency 1?
    Your help is greatly appreciated.
    Thanks,

    Hi
    All the exchange rates are in table W_EXCH_RATE_G.
    You define which rate you want to use in DAC , the default one is the corporate rate. to change it you need to change the dac parameter
    $$GLOBAL1_RATE_TYPE,$$GLOBAL2_RATE_TYPE,$$GLOBAL3_RATE_TYPE
    thx

Maybe you are looking for

  • Problem with saved tabs and downloads

    Hello. After updating to version 32.0. i have a few problems. First, after opening Firefox some of my saved tabs became new tabs. I`m using Super Start, maybe its his problems, but it doesn`t look like that. Previously it worked fine. Second, i can`t

  • Invoice Printing

    Hi all, My names are Andrew from Kenya. I work at a millk products plant called Sammer Agriculture. Currently we use SAP. At the Invoice department we print invoices fro various customers using SAP. The invoices are forwarded to the Epson dot matrix

  • Open file error in Keynote

    Hello, Odd behavior in Keynote 4.0.4.  I recently upgraded to Lion on a late 2011 MBP.  Good news is that my version of Keynote still seems to work just fine.  Bad news is that something odd is happening when opening existing presentations. - If I ju

  • Error : You have VMI enabled ASL entries in your Operating Unit.

    Dear All, When I select PO Encumbrance at (N)Purchase : setup : option : financial option I see error massage is "You have VMI enabled ASL entries in your Operating Unit. You cannot use Encumbrance Accounting with VMI" and I want to create PO but You

  • Lost Decimal Places when extracting value from ODS into Cube

    Hi, In short, we wish to transfer data from an ODS to a custom cube. One of the Key Figures is becoming an integer in the process. Both the ODS and Cube use the same InfoObject which is defined as a Number with a Data Type of FLTP. If I set a break-p