Redirection issues with 2 computers

Hey friends,I'm unsure of where to turn at this point and any ideas would be appreciated.tl;dr - 2 different computers (1 brand new, 1 old) redirecting to ads after scanning, not sure what else to do
PROBLEM
I have a computer in a clinic that is having an issue with redirecting the user to various ads. I originally thought this was perhaps a redirect virus. I ran a number of scans (Malwarebytes, SuperAntiSpyware, MSE, and SpyBot I think) for it to locate and remove a number of security issues.
After the scanning, the problem still remains. Instead of spending more time working on this computer, I installed a brand new one right out of the box. I updated the computer at our main office location (no issues with redirection at this point) and then took the new PC to the clinic, only for the new PC to redirect to the same ads. I began to...
This topic first appeared in the Spiceworks Community

I can't remember the exact solution, but I helped a friend who was having a similar problem. He had previously been directly connected to Sympatico. I had to change a network option to basically tell the iBook to just talk to the D-Link DI-524 directly. (In other words remove all of the Sympatic stuff.) If you haven't previously used Sympatico this may not help.

Similar Messages

How can I resolve as possible security issue with unauthorized computers through QuickTime , as a diagnostic and screen shots show evidence of a Mac computer and I don't have one?

II'm trying to resolve an issue that I have with my iPhone 4s through QuickTime. I think it might be an embedded mms that might broadcasts my info as well as allows remote access sometimes. Any answers or similar activity?, I can support with screenshots of public information . This shows in my emIl accounts as well.

Is your phone jailbroken? If it is not, you're probably not seeing what you think you're seeing. If your phone hasn't been jailbroken, it's certainly not being controlled remotely. What do you mean by an "embedded mms"? Are you sharing an Apple ID with anyone? Or could someone have gotten access to your Apple ID information?

WL plugin redirection issue with pageflow

I am making an enhancement to add a web application (page flow) to an existing site.
In the existing site all the pages are at the top level i.e. /page.htm and call .js to build headers, footers and breadcrumbs etc..
I use the Weblogic server plug-in to redirect *.jpf and *.do to the Weblogic server but use the headers (generated by the *.js files) and gif's etc from the static site.
I use PathPrepend so that the page.jpf is at the top level, but the Weblogic server see's the request as /app/webapp/page.jpf.
The page has a netui:form on it when I press submit on the page I go to /app/webapp/page.do I can use PathTrim to remove the /app/webapp from the request but the page doesn't render correctly because the relative path's for the header are from /app/webapp/ instead of /.
How can I force the Weblogic server to submit to /page.do instead of /app/webapp/page.do
Mark

Hello, I'm not an expert at confugring Apache and WebLogic servers. Hopefully someone else who does know what they are doing will reply to your question.
I found your question because I am also working on an Apache / WebLogic install for an Ariba installation (in Windows 7).
However I did support a configuration of WebLogic on Solaris with Apache. I remember that the guy who did the Apache install mentioned that Apache needed to be compiled correctly - below is what he sent:
Apache server compilation options:
./configure prefix=/usr/local/apache_2.0.63 enable-mods-shared=all enable-ssl=shared enable-ssl with-ssl=/usr/local/ssl enable-proxy enable-proxy-connect enable-proxy-http --with-mpm=worker
I am still looking into the differences between the plugins (mod 22 so vs mod 20 so). Navigating the Oracle download options can be bewildering. I found the link to download a full zip file of plugins (below).
Oracle WebLogic Server Web Server Plugins 1.1
http://www.oracle.com/technetwork/middleware/ias/downloads/wls-plugins-096117.html
I clicked on "all versions."
Does the WLSPlugin1.1-64bitApache2.2-solaris-sparc.zip contain what you need?
Great luck to you!
-Tom Tobey

Music & Video Sync issue with multiple computers

I sync my phone to multiple computers, one primarily for the ical and the other primarily for the music/video. Problem is, when I sync to my macbook pro (the ical & address book) I have the music sync turned off but it still wipes out ALL my music and videos! When I resync to my imac (the music & video) it puts the media right back on the phone of course.
Why does it wipe away my data? I tell it not to sync and it still wipes out my phone. It's quite annoying since it takes a while for the phone to re-sync 6-7 gigs of audio and video, not to mention if I'm not by my imac I have no A/V on my phone till I resync. The A/V functions are the reason most people buy the thing in the first place, I'm surprised its so un-userfriendly in this case.
any suggestions?
thanks,

I managed to get this done tonight. Unfortunately, I didn't see a solution posted anywhere, so maybe I'm the first. I did this with an iPhone, not an iPad, but I imagine the process is the same.
Step 1) Copy the contacts to the right profile. http://support.microsoft.com/kb/286044
Step 2) Back up your device.
Step 3) Start outlook and change the default profile to the one you want to use.
Step 4) Restore the device to it's original settings using the Restore button on the summary page.
Step 4) After the restore, it asks which backup you want to recover, pick the one you just did.
Now, if for some reason, it asks for an outlook profile during the restore, pick the right one. I was asked this go-round, but not when I originally started syncing the phone. Go figure.
Restoring to it's original settings could cause some sort of data loss. I don't care about any game saves, and I just sync with my gmail, so my contacts were really all I was concerned about. This process did recover 5 gigs of space eaten up by unexplained "other" data in my phone. Maybe it was cached e-mails, maybe it was old apps that didn't uninstall properly, who knows. But my apps, my e-mail, my contacts, my notes, my text messages and my calendar are all in place.
I have read that the default profile can be changed after the first sync, but in my situation, I wanted my outlook to default to this profile anyways.
Hopefully this will pop up in a google search for the next person who runs into this problem. It sure was a headache for me.

Reward for helping me out. Issue with Lenovo computers and musical equipment.

I know this may seem a wierd place to put this post, but as this looks like a conflict between hardware or drivers, I think it is possible that I can get better help from computer-Techs then Music-Techs.
Help me out before I grow bald and decapitate my self in agony.
I have used the last couple of months to build a setup to sooth my needs for using Native Instruments Traktor Pro 2.03
After hours of research I came up with a solution that says:
Computer: Lenovo T500 2.8Ghz with 4GB ram
Midi controllers: Numark Mixtrack Pro, Evolution UC-33e and Novation Launchpad
Softeware: Traktor Pro 2.03 and Midikatapult
All worked like a charm until I connected the Launchpad.
As it goes, it looks like the Launchpad and the T500 is a match made in HELL.
Whenever the Launchpad gets involved in any kind of midifeedback from Traktor or Midikatapult (for lighting up the LEDs), my computer totally freezes.
The freezes happens most of the time within a blink of an eye, and other times within half a seccond. Only options is to hard reset the computer in order to get out.
I have narrowed the issue to be some conflict between Lenovo and Launchpad.
Tried the setup on my wifes T400, with the same problem but when I hook it to my old HP it works fine (except for the HP being to slow to cope with it on a live playing basis).
Other people have the launchpad working fine on PC's with win7 pro 64bit just like me so it doesn't look like a win7 issue.
If I disable LED feedback, the setup works fine, but then I can't use midikatapult as it F&#$s my setup when I start up midikatapult. Seccondly it would be allmost impossible for me to navigate around a 80 button controller like the Launchpad without LED feedback.
I am in really pinned to the floor about having to buy another computer to get this working as the T500 sooths me perfect in all other aspects, so I am desperatly looking for a solution that doesn't envolve switching equipment or otherwise ruining me.
If you can give a usefull insight that solves this issue for me I will happily pay you 50$ for the trouble.
I really hope someone can help me out, and I know that I'm not the only one agonizing about this issue.
Best Regards Jeppe Johansden

I don't know anything about the MIDI products you're using so all I can do is give you some genreal tips, but hey, it might help.
First question - are these products all USB-based?
Second question - have you tried using an external POWERED USB-hub?
Third question - does it do the same regardless of which USB port you're plugged into? Some hardware seem to prefer certain ports to others.
Get back to me - will try to help.

Issue with workgroup computers not getting software/windows updates

i have a workgroup computer that we successfully got the client on and is talking back to SCCM with active heartbeat, etc. but when i'm pushing windows updates through SCCM it just checks in as active client in monitoring. It never downloads
the updates and installs them. any reason?

i checked these and these stopped on jan 30th recording information saying CTM job suspended on the contentTransferManager.log and Error: Delete Directory- Failed to delete directory with error 0x00000003 and next line says same thing just after directory
says c:\windows\ccmcache\2.bcwork with error 0x00000002
Releasing content request .
But there is nothing in the ccmcache folder. and the other logs in the CCM folder are updating pretty much except for a handful like these 2.

Issues with web browsers

Over the past week or so, I have gradually been encountering issues with all three of the browsers that I have installed on all my Apple computers.
I have the following three browsers installed:
Safari (version 5.1.5)
Firefox (version 11.0)
Google Chrome (Version (17.0.963.83)
On all the following computers:
iMac 2.8 Ghz, Intel Core 2 Duo running OS X (10.5.8)
iMac 2.66GHz Intel Core i5 running OS X (10.6.8)
MacBook Pro 2.4 GHz Intel Core i5 running OS X (10.6.8)
It seems that the issues are more noticeable when accessing sites like Facebook, Pinterest, YouTube, Yahoo or Yahoo Mail... (which makes me wonder if the issues are possibly linked to Flash?) Either the sites don't load or load partially (always quite slowly) and I keep having to refresh/reload the page to hopefully get the full pages to load. But even that doesn't get me anywhere most of the time and I am left with blank pages or partially loaded pages. Today I also noticed issues while trying to use Skype where I kept having connection issues. Not sure if those were linked to the issues with the browsers.
FYI, I keep all my Mac computers and applications up to date with automatic updates and am not sure whether these issues are Mac related, application/browser related or even possibly ISP related? Although when trying to assess my ISP connection speed via speedtest.net it appears to connect at the normal usual rate, both for download (about 13 Mb/s) and upload (about 6 Mb/s) from all three computers.
I have not really seen any other similar recent post on the forums here but did find a post where it was recommended to unchecked the box on the info window to open both Safari and Firefox in 32-bit mode, but it didn't fix anything for me.
I've never had issues with these computers before and they were all running perfectly fine when accessing the internet about a week ago. I am not using any anti-virus software on any of the three computers and I have not installed any new software or made any changes to the computers recently other than scheduled updates. They are all working fine when using applications (MS Word or Excel, Adobe InDesign, Illustrator, Photoshop, Lightroom...) not accessing the internet.
Anyone else has experienced similar issues? Anyone know of a solution? Any help or feedback would be greatly appreciated!
Thanks in advance!
Laurent

Hi Laurent ...
Try troubleshooting the Flash plugin ...
Quit all your browsers.
Now uninstall the Flash plugin then reinstall new > Troubleshoot Flash Player | Mac OS
(Use Safari for a test). Launch Safari From your Safari menu bar click Safari > Empty Cache
Now try a video.
BTW... if you have the ClickToFlash extension installed, that can prevent Flash based video from streaming. It can also be installed as a plugin in /Library/Internet-Plug-Ins.
When it comes to browsers, emptying the cache more often can help.
For all your Macs.
Use OpenDNS for better speed, more security, includes anti phishing filters, and it's free.
Open System Preferences / Preferences then select the Network tab. Click the Advanced tab then click the DNS tab.
Click +
Enter these numbers exactly as you see them here.
208.67.222.222
Click +
208.67.220.220
Then click OK.
More about OpenDNS here.
Topic : Manually provided DNS server addresses are higher priority than DHCP's

Should I buy a new MBP? (Lots of small issues with mine)

Hi,
There are a number of small but irritating problems with my MBP. Talking with a friend who has had her macbook into apple service 3 times now for replacements a lot more serious than my problems, I'm sure Apple won't replace the computer. A friend who has bought a couple MBPs now (later week version) has had very little problem with his.
Specifically, the issues I'm having are as follows:
1) CPU whine (I know this can't be fixed)
2) Fan "moo"/clunk. The computer sounds like a small helicopter at times and at the best of times is always noisy..
3) Heat issues - using the comp anywhere but on a flat surface (i.e. on my lap) and it heats up intensely. I know this is an issue with all computers, but compared to my powerbook it's night and day.
4) Lag Issues. Doing ANYTHING takes a "long" time. I need to reformat but from opening firefox to booting up the computer or even sometimes mousing over the icon tray.
5) Red headphone led. My internal speakers no longer work. I've read the problem has something to do with the headphone jack being stuck. Some fixes I've read include using a match stick, plugging in the headphones again (doesn't work).
6) My display flickers slightly now also. Seems to synch with the fan "moo"ing.
I'm using macintosh now because I like avoiding hassles. I switched from PC a few years ago after going through lots of issues and the powerbook was AWESOME. I'm assuming the macbookpro is going to eventually stabilize and work well also, is it there yet? Shall I buy a new one and just dump the current or will it be the same thing all over?
Macbook Pro / 12" Powerbook Mac OS X (10.4.6)

Thanks for all the advice, it's appreciated. Particularly the advice to go down to the mac store and talk to a guru. I'm going to do that tomorrow.
I've been able to tolerate things up until the latest bug, the fan now periodically starts spinning like a helicopter. It's way beyond anything I've dealt with.. I can't listen to music it's so loud and it disturbs anyone else around (clearly needs a fix).
I can't send it in to be repaired as I can't do without a computer for that long. This said I thought to connect the new and old machine and copy the most important files over.
(No I won't dump this lemon on someone else without letting them know about the issues. It may well be worthwhile to someone willing to nurse it through the various mac warranty & update issues. Eventually they may well end up with a new MBP).
Macbook Pro / 12" Powerbook Mac OS X (10.4.6)
Macbook Pro / 12" Powerbook Mac OS X (10.4.6)

Guest Anchor - Web Passthrough - Apple device web redirect issue

Hi All,
I've setup a Guest Mobility Anchor at DMZ with 5508 WLC. I've setup the EoIP mobility tunnel and everything works so far.
Now, I was testing multiple clients to connect to the Guest SSID and observed that Apple devices are not redirecting url, resulting unsuccessful connection.
I looked Cisco docs and added the command "config network web-auth captive-bypass enable" on the Anchor as recommended.
Even after executing the command, I'm still facing web redirect issue with Apple Devices. I don't have any issues with other devices, except Apple.
My controller running code AirOS 7.6.130.0. I'm using DMZ controller as DHCP server for Guests and public DNS servers as 8.8.8.8 & 8.8.4.4
How to solve this web redirect issue? Will a Third-party generated CSR solves the problem?
Thanks,
CJ

Hi All,
The issue was with WISPr Protocol with iOS Clients. After upgrading the AirOS Code on the controller to 8.0.100.0; the issue with Web Redirect is resolved.
Jagan

Flash player issues with system recognizing it's installed - all versions

I am running a Vista 64-bit computer.I seem to have had lots of trouble with Adobe Flash Player being recognized by various sites (and have the same issues with other computers running both XP and Windows 7). I've downloaded, I've clicked install, it shows in the computer but the sites keep asking me to download. I downloaded 11 recently, which didn't help and later found out that it doesn't support Vista 64 bit, even though I've had Vista 64 bit for 3 1/2 years! Anyway, I uninstalled 11 and found a download for 10 and put it back to that but it still doesn't help.For example, I was looking at patterns on michaels.com and I got the message to install Flash.
Again, I have FP 10 installed (now) and would like to know if there are additional steps to take in order to get sites to recognize it is installed. Additionally, I am curious as to the short-sitedness of Adobe NOT to provide Flash Player for 64 bit Vista machines. Because Microsoft charges crazy amounts to upgrade OS, it is unlikely that I'll upgrade to Win 7 anytime soon. And since the product (Vista x64) has been around for many years, why is it treated as though it doesn't exist?

Exactly same issue here.

Issue with normal page link redirecting to SSO page / forbidden page

Hi,
I am having an issue with a number of pages within my portal.
I have a 'List of Objects' that has been working for some time, each link in the list linked to another page.
Just lately a number of pages that are linked to within this list are not loading correctly.
When one of the items is selected, the correct page is initially displayed, but then after a couple of seconds the page is redirected to the 'Single Sign-On' page, or alternatively the page is redirected to a 'Forbidden' page with this error:
Forbidden
You don't have permission to access /pls/orasso/orasso.wwsso_app_admin.ls_login on this server.
(This page will also show up after the user tries to login when the page is redirected to the SSO page).
As well as this issue occuring at the front end, the same issue is happening when the pages are loaded from the back end, in the Navigator.
This issue is even happening when the page is opened up in 'edit' mode using the ORCLADMIN user.
Any help is greatly appreciated!!
Amanda.

Figured it out...

Issues with using the output redirection character with newer NXOS versions?

Has anyone seen any issues with using the output redirection character with newer NXOS versions?
Am receiving "Error 0x40870004 while copying."
Simply copying a file from bootflash to tftp is ok.
This occurs for both 3CDaemon and Tftpd32 softwares.
Have tried it on multiple switches - same issue.
Any known bugs?
thanks!
The following is an example of bad (NXOS4.1.1b) and good (SANOS3.2.1a)
MDS2# sho ver | inc system
system:    version 4.1(1b)
system image file is:    bootflash:///m9200-s2ek9-mz.4.1.1b.bin
system compile time:     10/7/2008 13:00:00 [10/11/2008 09:52:55]
MDS2# sh int br > tftp://10.73.54.194
Trying to connect to tftp server......
Connection to server Established. Copying Started.....
TFTP put operation failed:Access violation
Error 0x40870004 while copying tftp://10.73.54.194/
MDS2# copy bootflash:cpu_logfile tftp://10.73.54.194
Trying to connect to tftp server......
Connection to server Established. Copying Started.....
|
TFTP put operation was successful
MDS2#
ck-ci9216-001# sho ver | inc system
system:    version 3.2(1a)
system image file is:    bootflash:/m9200-ek9-mz.3.2.1a.bin
system compile time:     9/25/2007 18:00:00 [10/06/2007 06:46:51]
ck-ci9216-001# sh int br > tftp://10.73.54.194
Trying to connect to tftp server......
|
TFTP put operation was successful

Please check with new version of TFTPD 32 server. The error may be due to older version of TFPT server, the new version available solved this error. Files are getting uploaded with no issues.
1. Download tftpd32b.zip from:
http://tftpd32.jounin.net/tftpd32_download.html
2. Copy the tftpd32b.zip file into an empty directory and extract it.
3. Copy the file you want to transver into the directory containing tftpd32.exe.
4. Run tftpd32.exe from that directory. The "Base Directory" field should show the path to the directory containing the file you want to transfer.
At this point, the tftpserver is ready to begin serving files. As devices request files, the main tftpd32 window will log the requests.
Best Regards...

BYOD Onboarding issue with Redirects on ISE 1.2

Hi there,
I'm having intermittent issues with onboarding endpoints (both wired and wireless) with ISE 1.2 (Patch 12).
I get three differing scenarios upon attempting:
1). I get redirected to the ISE Self Registration Portal, register, download the supplicant OK and then can browse with no problems.
2) I dont get redirected at all and so never see the Self Registration portal. All browsing tries to go to the selected website and fails (presumably as the redirect URL is in place even if the browser is not "seeing" it). If I force the browser URL to to ISE I get the Self Registration Portal displayed but with no MAC details present so I can get no further.
3) I get redirected, and seemingly Register OK, download the profiles etc...but after a "Registered Sucessfully" message, any attempt to browse to external website is again redirected to the Portal. I can then re-register again (it lets me do that as if the first time) but I just end up in that loop forever.
These problems are mostly seen wirelessly (I have a WLC 5508) but also wired clients via 3850 wired ports. I am using a collection of endpoints (Andorid, IPads, Laptops) to test and de-registering them between attempts and the results are entirely random among the three scenarios.
I am not changing any policies in between attempts so they are working fine at times, and not at others.
Any help welcome!

Hi Neno,
Thanks for your reply. I have attached some info as requested. For AuthZ rules they should first hit an EAP-MSCHAPv2 rule via the secure SSID which redirects them to the NSP process and gives them an ACL on the WLC that only allows DHCP, DNS and traffic to from ISE.
Afterward registration they should then get a certificate and then after a COA reauthenticate using EAP-TLS.
All this works fine at times, but at other times Web traffic NEVER gets redirected to ISE to begin the registration process or alternatively endpoints are STUCK in a circle of registration in that the th redirect works OK and you register OK but the redirect is permanently on and you keep getting asked to re-register your device despite the fact you have already done it once.
If you can avoid either of these scenarios, it works absolutely fine. It feels like the endpoints themselves are the issue, as I am using a small set of test devices to register (and then de-register) to test with.
However the same device that wont work at all for many many attempts, will eventually suddenly work OK and the BYOD process completes. I do however seem to have a permanent problem with Surface Pro's in that I can never get them to see the redirect at all.

Photo stream "public website" in Internet Explorer - photo thumbnail's are gray, individual photo view is fine. Tested from various computers. No issue with Firefox, Safari or Chrome.

Dear All,
Recently I have started to use Photo Stream available from iCloud on iPhone device. I have made “test” photo stream with several photos in and set to “public website” in order to share photos with my relatives.
The issue is with Internet Explorer where list of photos (thumbnails) are shown in gray color. I can view photo one by one and slideshow also works fine.
On other computers IE behaves the same way.
https://www.icloud.com/photostream/#A2532ODWsAl87
No issue with photo list in thumbnails using Safari, Chrome or Firefox.
Can someone help on this issue?
It is very convenient to share photos via photo stream, but most of viewers by default has IE and many of them don’t have iCould account or apple device.
Kind regards,
M

Dear safari rss
Indeed, you are right, I have updated IE to version 10 and no issue with page view.
Solution woud be to update IE to version 10 (I have not tested IE9).
However users using Windows XP can have highest IE version 8. IE9 or IE10 is not suported in XP.
Unfortunatelly there are still many windows XP at my friends circle.
Thank you,
Best regards

Are there widespread issues with macbook pro lcds having to be replaced on computers less than a year and a half old

are there any know issues with respect to lcd displays going bad on macbook pros. my computer which sits on a desk and has never traveled outside the home needs a whole new lcd replacement. Its a year and three months old.Pretty bad for an expensive laptop

Welcome to the Apple Support Communities
Some MacBooks Pro with Retina display have got problems with the display, related to a display manufacturer. However, in this case, it's a common issue and Apple is replacing or repairing all of these computers for free.
In your case, probably it was bad luck. Computers fail, and maybe you have bad luck and your computer has got a defective part that has to be replaced. Fortunately, this rarely happens, and most of the users are happy with their MacBooks Pro

Redirection issues with 2 computers

Similar Messages

Maybe you are looking for