Redolog operation from primary to stand by database

We have primary and stand by database and our primary database is generating too much redo logs. what I learnt is reading of redlogs from primary is sequential operation. Basically this operation is taking more time. So is there any way to parallel the process of reading of redo logs from primary database.
Or I want a confirmation from oracle experts that this cant be done.

Hi,
The process has to be serial from log to log as later events may be dependant on earlier events.
For an individual log increasing the value of recovery_parallelism from it's default of 0 may help in your standby.
Cheers,
Harry

Similar Messages

Create Stand by database difference server

Dear all,
I copied physical datafiles whole database from production to stand by database.
After then i reconfig and start stb db.It's works well.But when i test updated and commit transaction from prod and i copied archive files into stb db and i tried to recover as following command:
sql> recover database;
ORA-00283: recovery session canceled due to errors
ORA-00264: no recovery required
What happend?
Thks for advance !
Chara

Hi,
ORA-00264:no recovery required
Cause: An attempt was made to perform media recovery on files that do not // need any type of recovery.
Action: Do not attempt to perform media recovery on the selected files. Check to see that the filenames were entered properly. If not, retry the command with the proper filenames.
Cheers

Archive Deleted from primary database

Dear Experts
I have configured physical standby database on oracle 9.2.0.1
an archive has been deleted from primary database. and it is not applied on standby database.
How can I synch my standby database with primary database?
please help me out
thanks

Do not need configure rman. Try this.This mean is you will get all changes from primary database without logs(archivelogs becuse you loss these) then apply these to stand by.This is a best way.First change SCN from Standby database then do these.
You can get SCN from standby as
select min (checkpoint_change#) from v$datafile_header

Error while registering RMAN from primary to catalog database

Hi all,
Here we have a 10g dataguard environment with db1(db_unique_name) as primary and db2(db_unique_name) as physical standby database. Also we configured one schema on a third machine as catalog database using following steps.
The steps executed in catalog database(appsdb):
SQL> create tablespace rmancatlog_tbs datafile '/u01/app/oracle/oradata/NEW/rman_catalog.dbf' size 500M autoextend off extent management local segment space management auto;
SQL> create user rman identified by oracle
2 default tablespace rmancatlog_tbs
3 quota unlimited on rmancatlog_tbs
4 ;
SQL> GRANT connect, resource, recovery_catalog_owner TO rman;
RMAN> create catalog;
recovery catalog created
Added tns entries of catalog database in primary and standby. Then from primary database we tried to register to catalog database. It is showing that it is registering. But every query afterwards in rman is throwing the error. Below are the steps and error:
[oracle@db1 ~]$ rman target sys/oracle catalog rman/oracle@appsdb
Recovery Manager: Release 10.2.0.3.0 - Production on Mon Aug 13 21:39:32 2012
Copyright (c) 1982, 2005, Oracle. All rights reserved.
connected to target database: NIOS (DBID=1589015669)
connected to recovery catalog database
RMAN> register database;
database registered in recovery catalog
RMAN> report schema;
Report of database schema
List of Permanent Datafiles
===========================
File Size(MB) Tablespace RB segs Datafile Name
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of report command at 10/08/2012 06:16:06
RMAN-00600: internal error, arguments [8201] [] [] [] []
Can anyone help regarding this error?
Thanks in advance.

on resync catalog it is throwing no output or error.
but it shows same error afterwards.
RMAN> resync catalog;
RMAN> report schema;
Report of database schema
List of Permanent Datafiles
===========================
File Size(MB) Tablespace RB segs Datafile Name
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of report command at 10/09/2012 03:55:53
RMAN-00600: internal error, arguments [8201] [] [] [] []

Standby database unable to fetch missing archive sequence from primary

Hi,
My primary oracle db version is 10.2.0.5 which is n Windows 2003 server 32 bit in file system
My standby database version is 10.2.0.5 which in wondows 2008 server in ASM instance.
some of the archivelogs are not fetching by standby database from primary db.because of that recovery is not happening and it waits for missing archive logs but its not transfering on satndby database.
I tried many time by doing manuall..manuall its hapening but again sometimes its stucks and waits for next missing archivelog.
standby alert log mesage
Sun Jul 08 21:33:13 Pacific Daylight Time 2012
FAL[client]: Failed to request gap sequence
GAP - thread 1 sequence 128945-128945
DBID 4176230406 branch 617106566
FAL[client]: All defined FAL servers have been attempted.
Check that the CONTROL_FILE_RECORD_KEEP_TIME initialization
parameter is defined to a value that is sufficiently large
enough to maintain adequate log switch information to resolve
archivelog gaps.
Sun Jul 08 21:44:03 Pacific Daylight Time 2012
db_recovery_file_dest_size of 2048 MB is 0.00% used. This is a
user-specified limit on the amount of space that will be used by this
database for recovery-related files, and does not reflect the amount of
space available in the underlying filesystem or ASM diskgroup.
trace file of standby
Dump file d:\oracle\admin\mks01p\bdump\mks01p_mrp0_6628.trc
Sun Jul 08 21:30:23 2012
ORACLE V10.2.0.5.0 - 64bit Production vsnsta=0
vsnsql=14 vsnxtr=3
Oracle Database 10g Enterprise Edition Release 10.2.0.5.0 - 64bit Production
With the Oracle Label Security, OLAP, Data Mining and Real Application Testing options
Windows NT Version V6.1 Service Pack 1
CPU : 8 - type 8664, 4 Physical Cores
Process Affinity : 0x0000000000000000
Memory (Avail/Total): Ph:37019M/49108M, Ph+PgF:87277M/103214M
Instance name: mks01p
Redo thread mounted by this instance: 1
Oracle process number: 19
Windows thread id: 6628, image: ORACLE.EXE (MRP0)
*** SERVICE NAME:() 2012-07-08 21:30:23.422
*** SESSION ID:(95.1) 2012-07-08 21:30:23.422
*** 2012-07-08 21:30:23.422 64949 kcrr.c
MRP0: Background Managed Standby Recovery process started
*** 2012-07-08 21:30:28.445 1170 krsm.c
Managed Recovery: Initialization posted.
*** 2012-07-08 21:30:28.445 64949 kcrr.c
Managed Standby Recovery not using Real Time Apply
*** 2012-07-08 21:30:39.833
Recovery target incarnation = 1, activation ID = -118713082
Influx buffer limit = 10000 min(50% x 191963, 10000)
Successfully allocated 7 recovery slaves
Using 158 overflow buffers per recovery slave
Start recovery at thread 1 ckpt scn 7982577982885 logseq 128945 block 2
*** 2012-07-08 21:30:40.784
Media Recovery add redo thread 1
*** 2012-07-08 21:30:40.784 1170 krsm.c
Managed Recovery: Active posted.
ORA-00313: open failed for members of log group 1 of thread 1
ORA-00312: online log 1 thread 1: '+ORAREDO3/mks01p/mks01p_redo01b.rdo'
ORA-17503: ksfdopn:2 Failed to open file +ORAREDO3/mks01p/mks01p_redo01b.rdo
ORA-15001: diskgroup "ORAREDO3" does not exist or is not mounted
ORA-15001: diskgroup "ORAREDO3" does not exist or is not mounted
ORA-00312: online log 1 thread 1: '+ORAREDO1/mks01p/mks01p_redo01a.rdo'
ORA-17503: ksfdopn:2 Failed to open file +ORAREDO1/mks01p/mks01p_redo01a.rdo
ORA-15001: diskgroup "ORAREDO1" does not exist or is not mounted
ORA-15001: diskgroup "ORAREDO1" does not exist or is not mounted
ORA-00313: open failed for members of log group 1 of thread 1
ORA-00312: online log 1 thread 1: '+ORAREDO3/mks01p/mks01p_redo01b.rdo'
ORA-17503: ksfdopn:2 Failed to open file +ORAREDO3/mks01p/mks01p_redo01b.rdo
ORA-15001: diskgroup "ORAREDO3" does not exist or is not mounted
ORA-15001: diskgroup "ORAREDO3" does not exist or is not mounted
ORA-00312: online log 1 thread 1: '+ORAREDO1/mks01p/mks01p_redo01a.rdo'
ORA-17503: ksfdopn:2 Failed to open file +ORAREDO1/mks01p/mks01p_redo01a.rdo
ORA-15001: diskgroup "ORAREDO1" does not exist or is not mounted
ORA-15001: diskgroup "ORAREDO1" does not exist or is not mounted
*** 2012-07-08 21:30:40.940 64949 kcrr.c
Clearing online redo logfile 1 +ORAREDO1/mks01p/mks01p_redo01a.rdo
ORA-00313: open failed for members of log group 1 of thread 1
ORA-00312: online log 1 thread 1: '+ORAREDO3/mks01p/mks01p_redo01b.rdo'
ORA-17503: ksfdopn:2 Failed to open file +ORAREDO3/mks01p/mks01p_redo01b.rdo
ORA-15001: diskgroup "ORAREDO3" does not exist or is not mounted
ORA-15001: diskgroup "ORAREDO3" does not exist or is not mounted
ORA-00312: online log 1 thread 1: '+ORAREDO1/mks01p/mks01p_redo01a.rdo'
ORA-17503: ksfdopn:2 Failed to open file +ORAREDO1/mks01p/mks01p_redo01a.rdo
ORA-15001: diskgroup "ORAREDO1" does not exist or is not mounted
ORA-15001: diskgroup "ORAREDO1" does not exist or is not mounted
ORA-00349: failure obtaining block size for '+ORAREDO1/mks01p/mks01p_redo01a.rdo'
ORA-15001: diskgroup "ORAREDO1" does not exist or is not mounted
Error 349 creating/clearing online redo logfile 1
*** 2012-07-08 21:30:40.987 64949 kcrr.c
Clearing online redo logfile 1 complete
*** 2012-07-08 21:30:41.034 64949 kcrr.c
Media Recovery Waiting for thread 1 sequence 128945
*** 2012-07-08 21:30:41.050 64949 kcrr.c
Fetching gap sequence in thread 1, gap sequence 128945-128945
Redo shipping client performing standby login
OCISessionBegin failed -1
.. Detailed OCI error val is 1031 and errmsg is 'ORA-01031: insufficient privileges
*** 2012-07-08 21:30:41.533 64949 kcrr.c
Error 1031 received logging on to the standby
*** 2012-07-08 21:30:41.533 64949 kcrr.c
FAL[client, MRP0]: Error 1031 connecting to MKS01P_PRD for fetching gap sequence
ORA-01031: insufficient privileges
*** 2012-07-08 21:31:11.610
Redo shipping client performing standby login
OCISessionBegin failed -1
.. Detailed OCI error val is 1031 and errmsg is 'ORA-01031: insufficient privileges
*** 2012-07-08 21:31:12.094 64949 kcrr.c
Error 1031 received logging on to the standby
*** 2012-07-08 21:31:12.094 64949 kcrr.c
FAL[client, MRP0]: Error 1031 connecting to MKS01P_PRD for fetching gap sequence
ORA-01031: insufficient privileges
*** 2012-07-08 21:31:42.186
Redo shipping client performing standby login
OCISessionBegin failed -1
.. Detailed OCI error val is 1031 and errmsg is 'ORA-01031: insufficient privileges
*** 2012-07-08 21:31:42.654 64949 kcrr.c
Error 1031 received logging on to the standby
*** 2012-07-08 21:31:42.670 64949 kcrr.c
FAL[client, MRP0]: Error 1031 connecting to MKS01P_PRD for fetching gap sequence
ORA-01031: insufficient privileges
*** 2012-07-08 21:32:12.747
Redo shipping client performing standby login
OCISessionBegin failed -1
.. Detailed OCI error val is 1031 and errmsg is 'ORA-01031: insufficient privileges
*** 2012-07-08 21:32:13.215 64949 kcrr.c
Error 1031 received logging on to the standby
*** 2012-07-08 21:32:13.230 64949 kcrr.c
FAL[client, MRP0]: Error 1031 connecting to MKS01P_PRD for fetching gap sequence
ORA-01031: insufficient privileges
*** 2012-07-08 21:32:43.276
Redo shipping client performing standby login
OCISessionBegin failed -1
.. Detailed OCI error val is 1031 and errmsg is 'ORA-01031: insufficient privileges
*** 2012-07-08 21:32:43.759 64949 kcrr.c
Error 1031 received logging on to the standby
*** 2012-07-08 21:32:43.775 64949 kcrr.c
FAL[client, MRP0]: Error 1031 connecting to MKS01P_PRD for fetching gap sequence
ORA-01031: insufficient privileges
*** 2012-07-08 21:33:13.821
Check that the CONTROL_FILE_RECORD_KEEP_TIME initialization
parameter is defined to a value that is sufficiently large
enough to maintain adequate log switch information to resolve
archivelog gaps.
i created new password fle on bith primary and standby database also.
Please help me to resolve this issue.

ORA-15001: diskgroup "ORAREDO3" does not exist or is not mounted
ORA-15001: diskgroup "ORAREDO3" does not exist or is not mountedhave you mentioned parameter LOG_FILE_NAME_CONVERT in standby when online redo log locations are different?
post from standby:-
SQL> select name, state From v$asm_diskgroup;
FAL[client, MRP0]: Error 1031 connecting to MKS01P_PRD for fetching gap sequence
ORA-01031: insufficient privilegesPost from primary & standby
SQL> select * from v$pwfile_users;
User Profile for 919131
919131
Handle:     919131
Status Level:     Newbie
Registered:     Mar 6, 2012
Total Posts:     16
Total Questions:     8 (8 unresolved)
OTN failed 100% to help you, then why you posted another question?
First close all your old answered threads and then better continue your updates in your thread.
Edited by: CKPT on Jul 9, 2012 11:45 AM

How do the application servers connect the new database after failing over from primary DB to standby DB

How do the application servers connect the new database after failing over from primary DB to standby DB?
We have setup a DR environment with a standalone Primary server and a standalone Physical Standby server on RHEL Linux 6.4. Now our application team would like to know:
When the primary DB server is crashed, the standy DB server will takeover the role of primary DB through the DataGuard fast failover. As the applications are connected by the primary DB IP before,currently the physical DB is used as a different IP or listener. If this is happened, they need to stop their application servers and re-configure their connection so the they coonect the new DB server, they cannot tolerate these workaround.
Whether does oracle have the better solution for this so that the application can automatically know the role's transition and change to the new IP without re-confige any connection and shutdown their application?
Oracle support provides us the answer as following:
==================================================================
Applications connected to a primary database can transparently failover to the new primary database upon an Oracle Data Guard role transition. Integration with Fast Application Notification (FAN) provides fast failover for integrated clients.
After a failover, the broker publishes Fast Application Notification (FAN) events. These FAN events can be used in the following ways:
Applications can use FAN without programmatic changes if they use one of these Oracle integrated database clients: Oracle Database JDBC, Oracle Database Oracle Call Interface (OCI), and Oracle Data Provider for .NET ( ODP.NET). These clients can be configured for Fast Connection Failover (FCF) to automatically connect to a new primary database after a failover.
JAVA applications can use FAN programmatically by using the JDBC FAN application programming interface to subscribe to FAN events and to execute event handling actions upon the receipt of an event.
FAN server-side callouts can be configured on the database tier.
FAN events are published using Oracle Notification Services (ONS) and Oracle Streams Advanced Queuing (AQ).
=======================================================================================
Who has the experience and the related documentation or other solutions? we don't have the concept of about FAN.
Thank very much in advance.

Hi mesbeg,
Thanks alot.
For example, there is an application JBOSS server connecting the DB, we just added another datasource and put the standby IP into the configuration file except adding a service on DB side like this following:
        <subsystem xmlns="urn:jboss:domain:datasources:1.0">
        <datasources>
                <datasource jta="false" jndi-name="java:/jdbc/idserverDatasource" pool-name="IDServerDataSource" enabled="true" use-java-context="true">
                    <connection-url>jdbc:oracle:thin:@<primay DB IP>:1521:testdb</connection-url>
                    <connection-url>jdbc:oracle:thin:@<standby DB IP>:1521:testdb</connection-url>
                    <driver>oracle</driver>
                    <pool>
                        <min-pool-size>2</min-pool-size>
                        <max-pool-size>10</max-pool-size>
                        <prefill>true</prefill>
                    </pool>
                    <security>
                        <user-name>TEST_USER</user-name>
                        <password>Password1</password>
                    </security>
                    <validation>
                        <valid-connection-checker class-name="org.jboss.jca.adapters.jdbc.extensions.oracle.OracleValidConnectionChecker"/>
                        <validate-on-match>false</validate-on-match>
                        <background-validation>false</background-validation>
                        <use-fast-fail>false</use-fast-fail>
                        <stale-connection-checker class-name="org.jboss.jca.adapters.jdbc.extensions.oracle.OracleStaleConnectionChecker"/>
                        <exception-sorter class-name="org.jboss.jca.adapters.jdbc.extensions.oracle.OracleExceptionSorter"/>
                    </validation>
                </datasource>
                <drivers>
                    <driver name="oracle" module="com.oracle.jdbc">
                        <xa-datasource-class>oracle.jdbc.OracleDriver</xa-datasource-class>
                    </driver>
                </drivers>
            </datasources>
        </subsystem>
If the failover is occurred, the JBOSS will automatically be pointed to the standby DB. Additional actions are not needed.

Standby can't received logs from primary after upgrade 10.2 to 11.2

Hi
I have counter problem on standby after upgrade from 10.2.0.1 to 11.2.0.2.The standby can not received logs from primary when look on dataguard log is shown as follows.it seem log transport service timeout before completion send logs to standby server
D MON_PROPERTY operation completed
2012-03-20 15:09:14.522 DMON: Timeout posting message to database 2 after having waited for 0 seconds, killing NSV1 (PID=4672)
2012-03-20 15:09:15.524 02001000 622551633 DMON: failed to forward op CTL_GET_STATUS to site standby with error ORA-16662
2012-03-20 15:09:15.524 02001000 622551633 DMON: Database PRIMARY returned ORA-16662
2012-03-20 15:09:15.524 02001000 622551633 for opcode = CTL_GET_STATUS, phase = NULL, req_id = 1.1.622551633
2012-03-20 15:09:15.525 02001000 622551633 DMON: CTL_GET_STATUS operation completed
2012-03-20 15:09:48.676 RSM detected log transport problem: log transport for database 'standby' has the following error.
2012-03-20 15:09:48.676 ORA-16198: Timeout incurred on internal channel during remote archival
2012-03-20 15:09:48.677 RSM0: HEALTH CHECK ERROR: ORA-16737: the redo transport service for standby database "standby" has an error
2012-03-20 15:09:48.789 00000000 622551634 Operation HEALTH_CHECK canceled during phase 2, error = ORA-16778
2012-03-20 15:09:48.790 00000000 622551634 Operation HEALTH_CHECK canceled during phase 2, error = ORA-16778
Please anyone have ideas
thanks
kind regard
Salutary(bob)
Edited by: 826034 on Mar 20, 2012 5:31 AM

826034 wrote:
SQL> select severity, error_code,message,to_char(timestamp,'DD-MON-YYYY HH24:MI:SS') from v$dataguard_status where dest_id=2;
Error              16198
WARN: ARC0: Terminating pid 31868 hung on an I/O operation
+20-MAR-2012 13:29:32+
SEVERITY      ERROR_CODE
MESSAGE
TO_CHAR(TIMESTAMP,'D
Error              16198
WARN: ARC0: Terminating pid 32182 hung on an I/O operation
+20-MAR-2012 13:34:37+
Error              16198
WARN: ARC0: Terminating pid 32393 hung on an I/O operation
SEVERITY      ERROR_CODE
MESSAGE
TO_CHAR(TIMESTAMP,'D
+20-MAR-2012 13:39:42+
Error              16198
WARN: ARC0: Terminating pid 32620 hung on an I/O operation
+20-MAR-2012 13:44:47+
Error              16198
SEVERITY      ERROR_CODE
MESSAGE
TO_CHAR(TIMESTAMP,'D
WARN: ARC0: Terminating pid 474 hung on an I/O operation
+20-MAR-2012 13:49:52+
Error              16198
WARN: ARC0: Terminating pid 696 hung on an I/O operation
+20-MAR-2012 13:54:57+
thanks
regard
SalutaryCheck this thread, it may helpful.. looks similar issue log shipping problem after upgrade to 11.2.0.2

Adding Temp tablespace to physical stand by database?

I am getting the below error when i try to load data using SQL loader from physical stand by database to another database after making the physical stand by database in read only mode.
ORA-25153: Temporary Tablespace is Empty.
On primary database when i query
SQL>select ts#,name from v$tablespace;
TS# NAME
2 TEMP
On physical stand by when i query
SQL>select ts#,name from v$tablespace;
TS# NAME
2 TEMP
On primary DB when i query
select name from v$tempfile where ts#=2;
NAME
/dev/vx/rdsk/oradata/tempfile0101
On standby when i query
SQL>select name from v$tempfile where ts#=2;
no rows selected
At this point do i need to add datafile to the TEMP tablespace of stand by database or just need to add TEMP tablespace to stand by database.?
DB version:9.2.0.6
Thank You all...

Can you make sure that /dev/vx/rdsk/oradata/tempfile0101 is copied to standby site during the standby creation. Often it happens that the hot backups are copied to standby ste and generally they dont contain temp files. If the files is present , then i'll suggest you to do a quick bounce of standby instance to make sure that controlfile attempted to access it. You can also try recreating the standby control file on promary and copy it to standby site along with the tempfile and start the instance with new control file.
If you want to add temp files to the standby instance, the only option you have is to add them on primary site. If you have standby_file_management as auto they will get copied over. If not you can copy the files to standby instance and restart the recovery.
Please let us know if any of the hints are applicable to your case.
-Ravi

Manually Apply Archived log to stand by database

Hi all,
I'm using Oracle 10g. So, we need to apply the archived logs of Primary database to stand by database, but this process must be manually.
A "robot" copy the archived logs to destination. I need to get these archived logs from destination and manually apply to stand by database.
How can I do this?
thank you very much!!!!

How can I do this?First stop current recover process as
alter database recover managed standby database cancel;Then transfer all need archive logs from primary to standby side and apply these manually using below command.
recover standby database until cancel
/*this command will ask full path of archive logs
and give these then finally enter "CANCEL" word*/Finally you can continue normal/automatic state using
alter database recover managed standby database ;

Rman back up on stand by database

Hi all,
I created one stand by database. log shipping is not in place yet.
I manually copied rman files and archive files from the primary database and copied to standby.
Whenever I was trying to restore the database. it gives me below error. please see and let me know if I am doing it wrong.
Recovery Manager: Release 10.2.0.3.0 - Production on Tue Sep 28 11:20:16 2010
Copyright (c) 1982, 2005, Oracle. All rights reserved.
connected to target database: WTFNL (DBID=3371173325, not open)
RMAN>
using target database control file instead of recovery catalog
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of configure command at 09/28/2010 11:20:16
RMAN-05021: this configuration cannot be changed for a BACKUP or STANDBY control file
RMAN>
Recovery Manager complete.
RAMAN backup completed.
Tue Sep 28 11:20:16 EST 2010
Thanks

Make sure from where you are giving commands...
Oracle Error :: RMAN-05021
this configuration cannot be changed for a BACKUP or STANDBY control file
Cause
The user attempted to modify the configuration which cannot be changed for a BACKUP or STANDBY control file while the mounted control file was either BACKUP or STANDBY. The following configurations can be changed only when connected to primary database instance that has CURRENT/CREATED control file type mounted: CONFIGURE RETENTION POLICY CONFIGURE EXCLUDE CONFIGURE ENCRYPTION CONFIGURE DB_UNIQUE_NAME
Action
Connect to primary database instance and execute the command.

[Forum FAQ] How to configure a Data Driven Subscription which get multi-value parameters from one column of a database table?

Introduction
In SQL Server Reporting Services, we can define a mapping between the fields that are returned in the query to specific delivery options and to report parameters in a data-driven subscription.
For a report with a parameter (such as YEAR) that allow multiple values, when creating a data-driven subscription, how can we pass a record like below to show correct data (data for year 2012, 2013 and 2014).
EmailAddress                             Parameter
Comment
[email protected]              2012,2013,2014               NULL
In this article, I will demonstrate how to configure a Data Driven Subscription which get multi-value parameters from one column of a database table
Workaround
Generally, if we pass the “Parameter” column to report directly in the step 5 when creating data-driven subscription.
The value “2012,2013,2014” will be regarded as a single value, Reporting Services will use “2012,2013,2014” to filter data. However, there are no any records that YEAR filed equal to “2012,2013,2014”, and we will get an error when the subscription executed
on the log. (C:\Program Files\Microsoft SQL Server\MSRS10_50.MSSQLSERVER\Reporting Services\LogFiles)
Microsoft.ReportingServices.Diagnostics.Utilities.InvalidReportParameterException: Default value or value provided for the report parameter 'Name' is not a valid value.
This means that there is no such a value on parameter’s available value list, this is an invalid parameter value. If we change the parameter records like below.
EmailAddress                        Parameter             Comment
[email protected]         2012                    NULL
[email protected]         2013                     NULL
[email protected]         2014                     NULL
In this case, Reporting Services will generate 3 reports for one data-driven subscription. Each report for only one year which cannot fit the requirement obviously.
Currently, there is no a solution to solve this issue. The workaround for it is that create two report, one is used for view report for end users, another one is used for create data-driven subscription.
On the report that used create data-driven subscription, uncheck “Allow multiple values” option for the parameter, do not specify and available values and default values for this parameter. Then change the Filter
From
Expression:[ParameterName]
Operator   :In
Value         :[@ParameterName]
To
Expression:[ParameterName]
Operator   :In
Value         :Split(Parameters!ParameterName.Value,",")
In this case, we can specify a value like "2012,2013,2014" from database to the data-driven subscription.
Applies to
Microsoft SQL Server 2005
Microsoft SQL Server 2008
Microsoft SQL Server 2008 R2
Microsoft SQL Server 2012
Please click to vote if the post helps you. This can be beneficial to other community members reading the thread.

For every Auftrag, there are multiple Position entries.
Rest of the blocks don't seems to have any relation.
So you can check this code to see how internal table lt_str is built whose first 3 fields have data contained in Auftrag, and next 3 fields have Position data. The structure is flat, assuming that every Position record is related to preceding Auftrag.
Try out this snippet.
DATA lt_data TYPE TABLE OF string.
DATA lv_data TYPE string.
CALL METHOD cl_gui_frontend_services=>gui_upload
EXPORTING
    filename = 'C:\temp\test.txt'
CHANGING
    data_tab = lt_data
EXCEPTIONS
    OTHERS   = 19.
CHECK sy-subrc EQ 0.
TYPES:
BEGIN OF ty_str,
a1 TYPE string,
a2 TYPE string,
a3 TYPE string,
p1 TYPE string,
p2 TYPE string,
p3 TYPE string,
END OF ty_str.
DATA: lt_str TYPE TABLE OF ty_str,
      ls_str TYPE ty_str,
      lv_block TYPE string,
      lv_flag TYPE boolean.
LOOP AT lt_data INTO lv_data.
CASE lv_data.
    WHEN '[Version]' OR '[StdSatz]' OR '[Arbeitstag]' OR '[Pecunia]'
         OR '[Mita]' OR '[Kunde]' OR '[Auftrag]' OR '[Position]'.
      lv_block = lv_data.
      lv_flag = abap_false.
    WHEN OTHERS.
      lv_flag = abap_true.
ENDCASE.
CHECK lv_flag EQ abap_true.
CASE lv_block.
    WHEN '[Auftrag]'.
      SPLIT lv_data AT ';' INTO ls_str-a1 ls_str-a2 ls_str-a3.
    WHEN '[Position]'.
      SPLIT lv_data AT ';' INTO ls_str-p1 ls_str-p2 ls_str-p3.
      APPEND ls_str TO lt_str.
ENDCASE.
ENDLOOP.

How to restore standby from primary after failover.

HI we have a dr setup but the standby is provided archives through an application not the datagaurd.
So for applying application patch I cant switchover the database.
I have to shutdown the primary database and apply failover to the standby database to apply patch.
Can you please tell how can I restore my standby database to actual primary after failover.
As our actual activity will be in 2 weeks time. We want to apply patch on saturday.
DR DRILL is on 8th nov.

Your earlier statement "Can you please tell how can I restore my standby database to actual primary after failover"
means something different from "SO have to restore from cold backup of primary database"
What you seem to want is a procedure to recreate the Standby from a Backup of the Pirmary. (ie FROM Primary TO Standby).
You haven't specified your Oracle Version. DG has been available since 9i (was even backported to 8i) but I will presume that you are using 9i
You should follow the same process as used for the first creation of the standby, except that you don't have to repeat some of the setup steps (listener, tnsnames etc)
http://download.oracle.com/docs/cd/B10501_01/server.920/a96653/create_ps.htm#63563
Hemant K Chitale
http://hemantoracledba.blogspot.com

How to delete an operation from order using the bapi

Can somebody please tell me how to delete an operation from order using the bapi
BAPI_ALM_ORDER_MAINTAIN.
Following was the test data for the BAPI.
000000 OPERATION DELETE 0000040052810070
000000 SAVE 0000040052810070
Even I tried entering the operation table. The BAPI control ends fine, but when I check the order using IW32, the operation still exists.
So, can you please tell me where Iam going wrong.

Hi Subash Mohanvel,
Check bapireturn parameter of the bapi BAPI_ALM_ORDER_MAINTAIN after execution of the code , and if there is no error message in the return table then call bapi_Transaction_commit.
Unless you call this database saving of the records/values will not get reflected in the system.
Hope that helps.
Regards
Kapadia
***Assigning points is the way to say thanks in SDN.***

Archived Log is not shifting from Primary to DR

we have increase the table size without taking care of DR, so
sapdata1 becomes 100% at DR site after that applying archived had
stopped at DR, after that i manually added datafile using following
commands,
select * from v$recover_file where error like '%FILE%';
Primary-:
1)select file#,name from v$datafile where file#=33;
/oracle/BP1/sapdata1/sr3_21/sr3.data21
2)select file#,name from v$datafile where file#=34;
/oracle/BP1/sapdata1/sr3_22/sr3.data22
alter system set standby_file_management =Manual;
DR-:
1)select file#,name from v$datafile where file#=33;
/oracle/BP1/102_64/dbs/UNNAMED00033
2)select file#,name from v$datafile where file#=34;
/oracle/BP1/102_64/dbs/UNNAMED00034
alter database create datafile '/oracle/BP1/102_64/dbs/UNNAMED00033'
as '/oracle/BP1/sapdata1/sr3_21/sr3.data21';
alter database create datafile '/oracle/BP1/102_64/dbs/UNNAMED00034'
as '/oracle/BP1/sapdata1/sr3_22/sr3.data22';
alter system set standby_file_management =Auto;
alter database recover managed standby database disconnect from
session;
after that all logfile which is available at DR is applied but now
automatic shifting from primary to DR is not happen, please check and
provide the solution as early as possible because if log gap increase
we have to go for backup and restore and our DR site is so far.

Dear Orkun Gedik ,
Please find the Aler Log-:
Errors in file /oracle/BP1/saptrace/background/bp1_mrp0_20361.trc:
ORA-00313: open failed for members of log group 1 of thread 1
Thu Aug 11 18:39:53 2011
Errors in file /oracle/BP1/saptrace/background/bp1_mrp0_20361.trc:
ORA-19527: physical standby redo log must be renamed
ORA-00312: online log 1 thread 1: '/oracle/BP1/origlogA/log_g11m1.dbf'
Clearing online redo logfile 1 complete
Please find the log for bp1_mrp0_20361.trc
Start recovery at thread 1 ckpt scn 232442669 logseq 4297 block 2
2011-08-11 18:39:53.881
Media Recovery add redo thread 1
2011-08-11 18:39:53.881 1180 krsm.c
Managed Recovery: Active posted.
ORA-00313: open failed for members of log group 1 of thread 1
2011-08-11 18:39:53.891 64311 /se_autofs/patch_archive/102044/197/10107454/k
crr.c
Clearing online redo logfile 1 /oracle/BP1/origlogA/log_g11m1.dbf
ORA-00313: open failed for members of log group 1 of thread 1
ORA-19527: physical standby redo log must be renamed
ORA-00312: online log 1 thread 1: '/oracle/BP1/origlogA/log_g11m1.dbf'
Error 19527 creating/clearing online redo logfile 1
2011-08-11 18:39:53.950 64311 /se_autofs/patch_archive/102044/197/10107454/k
crr.c
Clearing online redo logfile 1 complete
2011-08-11 18:39:53.960 64311 /se_autofs/patch_archive/102044/197/10107454/k
crr.c
Media Recovery Waiting for thread 1 sequence 4297

Diagnosing an ASM space issue for a primary and a standby database instance with external redundancy.

I've received an alert from Enterprise manager saying "Disk Group DATA_SID requires rebalance because at least one disk
is low on space". My colleague who I would go to with this question is unavailable, so this is a learning opportunity
for me. So far google and Oracle documentation have provided lots of information, but nothing that answers my questions.
I've run the following query on both the primary and standby databases ASM instances:
select name, disk_number, sector_size,os_mb, total_mb, free_mb, redundancy from v$asm_disk;
On the primary I get 4810M Free space and 18431M Total Space
on the standby I get 1248M Free space and 18431M Total Space -- this is the one that complained via OEM
When I run the following query in the database instance:
select sum(bytes)/1024/1024 MB from dba_segments;
I get 3736.75M as a result.
My questions are:
1. Will OEM's suggestion to rebalance the disk actually help in this situation since the instance is set up with external redundancy?
2. If I've got 18G of space and only 3.7G of data, why is OEM complaining?
3. How can I reclaim what I presume is allocated but unused space in my problem disk group?
4. How can I determine what extra data the standby has that the primary doesn't since both have the same total space allocation, but different amounts of free space?

Thank you for the reply. That link is very good.
We are an 11.1 version of our database. Linus is OEL 5.6.
So, looking at the portion of the link that refers to 'Add Standby database and Instances to the OCR' - If we use SRVCTL to give the STANDBY the role of ‘physical_standby’ and the start option of ‘mount’, what effect will that have if the STANDBY becomes our PRIMARY?
Would these database settings need to be modified manually with SRVCTL each time?
We understand why the instance is not starting when the node is rebooted, we are looking for a best practice of how this is implemented.
Thank you.

Redolog operation from primary to stand by database

Similar Messages

Maybe you are looking for