Reducing the time for a call to go to voicemail

I want to reduce the time time it takes for a call to go to voicemail. Currently the setting in Tools-Options-Calls-Voice Messages is 15 seconds. How can I reduce the time.

Yes there is a way to set up the default number of "time" not rings. Default is 20sec I have mine at 30sec (max)
Voicemail No-Answer Length
check to see vm number *#61#
Cing 61*1areacodevmnumber*1130#
First Dial *#61# to see your voice mail number (this is the number that the phone fowards the call to when there is no answer) write it down including area code
Then dial 611(VOICEMAIL NUMBER)1130# then dial or send
There should be no spaces and make sure you enter the number correctly (ie) 61*13235552323*1130# then you should see a comfirmation.

Similar Messages

How to reduce the time for each clips up to 0,04 seconds?

Hi, I'm trying to realize my first time laps. I've need to reduce the time for each clips up to 0,04 seconds, but it seems that the minimum time is 0,1 second. There's a solution?

And use a zip file. Many people can't open RARs.
There are only two ways to tell somebody thanks: Kudos and Marked Solutions
Unofficial Forum Rules and Guidelines

Reducing the time for select query

Hi
Please advise why the query is taking too much time to execute when the cost involved in the joins is less.
Here is the explain plan for the same
| Id | Operation | Name | Rows | Bytes |TempSpc| Cost (%CPU)| Time |
| 0 | SELECT STATEMENT | | 4989 | 984K| | 295K (1)| 00:59:09 |
| 1 | SORT ORDER BY | | 4989 | 984K| 2120K| 295K (1)| 00:59:09 |
|* 2 | FILTER | | | | | | |
|* 3 | HASH JOIN | | 4989 | 984K| | 12975 (1)| 00:02:36 |
|* 4 | HASH JOIN | | 4989 | 862K| | 11943 (1)| 00:02:24 |
| 5 | TABLE ACCESS FULL | tedy_hf | 993 | 22839 | | 17 (0)| 00:00:01 |
|* 6 | HASH JOIN | | 4989 | 750K| | 11925 (1)| 00:02:24 |
|* 7 | TABLE ACCESS FULL | tedy_hf453 | 145 | 2465 | | 7 (0)| 00:00:01 |
|* 8 | HASH JOIN | | 4989 | 667K| | 11917 (1)| 00:02:24 |
|* 9 | INDEX SKIP SCAN | tedy_ehf33 | 4987 | 116K| | 4992 (1)| 00:01:00 |
|* 10 | TABLE ACCESS FULL| tedy_7nl | 43367 | 4785K| | 6925 (1)| 00:01:24 |
| 11 | TABLE ACCESS FULL | tedy_hfeei | 89616 | 2187K| | 1032 (1)| 00:00:13 |
|* 12 | TABLE ACCESS FULL | tedy_hf455 | 2 | 32 | | 113 (0)| 00:00:02 |
--------------------------------------------------------------------------------------------------

Because the cost is internally calculated by the Cost Based Optimizer using the data available when parsing the query (tables, columns, constraints, cardinalities, etc...). If you feed it bad information (stale statistics, not using NOT NULL constraints, check constraints, foreign key constraints, etc..) it chooses inappropriate access methods.
Based on what you've posted, not much help is possible.
When your query takes too long ...
and
HOW TO: Post a SQL statement tuning request - template posting
Will get you started on providing meaningful information with which we can help you.

How to reduce the time..?

Hi All,
this statement below is taking lot of time how can i reduce the time ....?
cheers
sundeep
select * from zausfu where vbeln in so_vbeln
                    AND wadat_ist IN so_wadat
                    AND aland IN so_eland
                    AND vsbed IN so_vsbed
                    AND vsart IN so_vsart
                    AND sdabw = sdabw_wert.
tab-aland = zausfu-aland.
tab-vbeln = zausfu-vbeln.
tab-wadat = zausfu-wadat_ist.
tab-vsart = zausfu-vsart.
tab-sdabw = zausfu-sdabw.
IF sdabw_wert = 'A'.
    tab-flag = 'X'.
ENDIF.
   anz_datensaetze = anz_datensaetze + 1.
append tab.
endselect.

Hi Sundeep,
Please use the below code, might be it will reduce the time for u r program.
Types Declaration
types: begin of ty_zausfu,
       aland type zausfu-aland,
       vbeln type zausfu-vbeln,
       wadat type zausfu-wadat_ist,
       vsart type zausfu-vsart,
       sdabw type zausfu-sdabw,
       end of ty_zausfu.
types: begin of ty_tab,
       aland type zausfu-aland,
       vbeln type zausfu-vbeln,
       wadat type zausfu-wadat_ist,
       vsart type zausfu-vsart,
       sdabw type zausfu-sdabw,
       flag(1)
       end of ty_tab.
Internal Table Declaration
data: it_zausfu type standard table of ty_zausfu initial size 0,
        it_tab type standard table of ty_tab initial size 0.
Workarea Declaration
data: is_zausfu type ty_zausfu,
        is_tab type ty_tab.
Data Declaration
      anz_datensaetze type i.
Data Read from Tables
select aland vbeln wadat_ist vsart sdabw from zausfu
into table it_zausfu
where vbeln in so_vbeln
AND wadat_ist IN so_wadat
AND aland IN so_eland
AND vsbed IN so_vsbed
AND vsart IN so_vsart
AND sdabw = sdabw_wert.
describe table it_zausfu lines anz_datensaetze.
      loop at it_zausfu into is_zausfu.
      move-corresponding is_zausfu to is_tab.
      if sdabw_wert = 'A'.
        is_tab-flag = 'X'.
      endif.
      append is_tab to it_tab.
      clear: is_zausfu, is_tab.
      endloop.
Please reward points, if it is ok.
Regards,
Subbarao

Web report for opening it takes long time how to reduce the time?

HI Experts,
I created report using webi. For next time while opening it takes more time. How to reduce the time.

Hi Manikandan,
There could be multiple reason behind the bad performance.
1. Are you using supported JVM version to run Webi reports?
2. Do the reports contain prompts? Are the LOVs set to "Automatic refresh before use"? If yes, uncheck it.
3. How many queries do the report has? Can you run the queries one by one and check which query is taking much time?
4. If it based on relational database, copy and run it against the database directly and check how much time it takes. If more, you may have to fix the issue at database level like using temporary tables, indices, etc.
5. Also check if there are firewalls or proxy server between client and server communication. if yes, try to refresh the report directly on BO server and check.
6. Check if there is any hinderance between BO server and Database server communcation.
Hope it will help.
Regards,
Yuvraj

How can I reduce the time between songs to zero for seemless mixing

Hi, Ive only just got my 5th generation Ipod and was wondering if its possible to reduce the time gap between songs to zero. I.E a lot of Cd's and albums I have are mixed so it doesnt seem there is a pause between each song but when I put the cd's onto my ipod there is still a pause.
For example I have a 2 many djs album which is heavily mixed with a new song every 30 seconds so it is a bit of a nuisance if there is a pause every 30 seconds.

Your question gets asked on a daily basis, and has been answered many times. If you search for 'gapless playback' you'll see how just how many people inquire about this.
In short... the iPod does not support gapless playback.
If you want to eliminate the gaps, one workaround is to join the individual tracks together, and play them as one single track. You can do this by reimporting the CD into iTunes using the 'Join CD Tracks' feature.
See Step 3 in this article:
http://docs.info.apple.com/article.html?artnum=93079
If you'd like to send feedback to Apple to ask that they include gapless playback as a feature in future revisions of the iPod firmware, you can do so on this feedback page.

How to reduce download time for intial swf?

How to reduce download time for intial swf?
There are a number of RPC calls but most of the data is cached at server end but still swf takes a lot of time to download completely.
What all are the ways by which i can reuce the inital load time of my application?

Reduce the size of the SWF by moving code and assets not needed for the
first screen out into modules.

Saving to SharePoint works only half the time for Windows 7 Users--all the time for Windows XP users

We have a SharePoint 2010 Environment with hardware load balancing, 2 WFEs, 2 Apps Servers and 1 SQL Server. This was built in October 2013. Office Integration and Saving back to SharePoint works all of the time for users on XP. It works sporadically for
users on Windows 7. When Windows 7 users do the following:
Opening an Office Document from computer and saving it to SharePoint
Within a Document Library, using Save As from an opened document
When selecting in a Document Library from the Document Tab> “New” and then the desired content type
Send> Save to SharePoint from within Office Document
They may either be brought to the SharePoint library (correct) or to My Documents (incorrect).
In the case of number 1 (Opening an Office Document from computer and saving it to SharePoint)--using Save and Send will sometimes open the SharePoint library and sometimes open My Documents.
Our URL is https://CompanyName.domainname.com/Sites/SiteCollectionName
The intermediary "Sites" is actually a blank path.
When My Documents is opened I've noted with Fiddler (a web debugger) that we get a 404 on sites:
Could this be the issue?

Some things to double check:
Ensure that you have sticky sessions enabled on your load balancer
Check that your WebDav calls are making it to the server
Ensure that you have a root site collection in all your web apps
Just out of curiosity, what is the http request look like for the 404 error?
Chris Givens CEO, Architecting Connected Systems
Blog Twitter

Reducing the time interval in file Adpt to write a flat file at a location

Hi All,
I hav a scenario where i hav to write a flat file (XXX.txt) to a location. b4 doing that, i hav to check whether XXX.txt already exists or not. If it doesn't exists then i hav to write the XXX.txt file there. if it already exists, then i hav to wait until that xxx.txt file gets deleted.
In the receiver file adapter v hav an option file construction mode = create which does the same thing. but the problem here is it is taking too long (more than 5 min) which is not at all acceptable in my case (it is ok if it takes 1 min).
Is there any way to reduce the time interval using the same option?
Or do we hav any work around solution for acheiving the same scenario?
any help wud b appreciated.
Thnx in Adv.
Anil

Anil
As far as my knowledge goes I think it is not possible because we are not going to do anything from our end. XI is doing processing and creating a file for you. But you might be sending a large file at a time. So you have to improve the performance in your scenario. You check this urls on how to improve performance in XI:
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/70ada5ef-0201-0010-1f8b-c935e444b0ad
Improving performence in XI
Maximum Permitted File Size in XI
---Satish

Reduce publishing time for Air iOS apps?

Hi,
Currently it's taking my machine up to 4 minutes to publish an Air iOS app.
Are there any settings or hacks I could try to reduce the time?
I'm using Flash CS 6 + AIR SDK 16 on a Windows 8.1 laptop.
Stats:
- Intel Pentium Prozessor (1,5 GHz, Intel HD Graphics, Microsoft Windows 8, 64-bit)
- 4 GB DDR3-RAM
- 500 GB Hybrid-SSHD-Festplatte with 8 GB SSD
Thanks for any tips.

Hi,
I'm really interested in this feature as well. Have spent a bit of time attempting to get one running through a native extension but it doesn't appear to work. I believe something in the AIR build process is blocking the components required. I've tried several methods so far:
packaging the appex with an ANE
packaging the appex with the AIR container app
using a class instead of a storyboard
But nothing seems to be working. This is even before the app extension is doing anything. My guess is that the plist file specifying the app extension isn't correctly being included in the application but I have no idea how to update it to test.

Can Cisco Historical Reports Report Average Hold Time for Incoming Calls?

Is the a way that Cisco Historical can report on the Average Hold Time for Incoming Calls? User is trying to figure out if there is a hold time prior to the agent picking up the call.
I am running CRS Historical Reports Versions 5.0 (2.5).

Hi,
You can check the link belowCisco Unified Contact Center Express 5.0 Historical Reporting Administrator and Developer Guide:
http://www.cisco.com/en/US/docs/voice_ip_comm/cust_contact/contact_center/crs/express_5_0/programming/hr_admin_devp/crs501hd.pdf
this document includes all the details regarding the reports and its cutomization.
Regards,
Trad

Reducing the times

I am keen to know the following information and how can we reduce the times without affecting realiability..
1) How long do the messages take to reach IE from AE and what is the idle time in Java queues? Which parameter can be increased (Java Sendqueue) and what is the upper limit without affecting reliability?
2) How long do the messages spend in queues or in transit on ABAP stack? Which parameters can changed to decrease the idle time and what is the upper limits for a given resources (DIA, memory etc). (Inbound queues, balancing and whatelse?)..
3) How long do the messages spend in outbound queues or in transit to receiver AE(java)? Which parameters affect this? (outbound queue size & concurrency and what else?)
4) What is the idle time on the receiver java AE queues and what parameters can changed to decrease the idle time without causing HTTP errors? (receive queue size and what else.. java scheduler time?)

Oh ... well ... if we are going in that direction ....
be the big cheese, sweep in, wave your hands around a lot, get everyone running around and leave. Renders will be done when you arrive for your next session.
In all seriousness, Randy is right - sleep is way underrated a means of getting work done!
x

How can I reduce the selection for the characteristics value in a BW query

Good morning,
I need to find out how I can reduce the selection for the characteristics values in a BW query.
In a BW query I have a characteristic "Due month".
The characteristic values shown in the query are from 01.2001->03.2007. I would like to reduce it to the last 2 years,in the query view, without deleting the data for the other years in the cube.
Do you know how this can be done?
Thank you in advance for your feedback.
Kind regards,
Linda Verding
Staff Consultant - CSC

hi,
First thing you have to do is check the report how the data is being restricted only to those months.
1) one it can be variable in which the code is written for that to populate for last few years.
or else it must have been hardcoded for these months.
Go into your report and underneath the characteristicsCALMONTH there must be an variable or hardcoding.
You need to change this here in the report.
You dont have to delete anything there.
Regards, Siva

We have an issue when we send a film to the media encoder it crashes about half of the time for no particular reason. Anyone else got that too with Premiere Pro CC and the new Media encoder? Thanks! bedrijfsfilm Companyfilms

We have an issue when we send a film to the media encoder it crashes about half of the time for no particular reason. Anyone else got that too with Premiere Pro CC and the new Media encoder?

We have an issue when we send a film to the media encoder it crashes about half of the time for no particular reason
Anyone else got that too with Premiere Pro CC and the new Media encoder?
Lack of detailed info makes your question impossible for anyone to answer you!
eg. ...."Doctor it hurts...anyone else got something that hurts?"

My battery runs low very fast (three hours). I looked in the usage settings and it seems the time for usage and stand-by are the same, allthough i did have my iphone on stand-by!! What can i do?

Community,
I have a problem with my iphone 4. Every few months my battery starts draining within a few hours. I have tried all kinds of battery saving tips, but they don't help. When i go to the settings/general/usage is can see that the time for Usage and Stand-by are the same, so my phone is fully on all the time this explains the draining. But in reallity i turn my phone to stand-by most of the time, i mean the screen is black and all???
The first and second time a had this problem, both a few months a part, i restored my phone and it was solved. This time i restored my phone but this did not help!! And restoring my phone every two months is not my preferd way of solving this problem.
Does anybody have an idea on how to solve this problem? can anybody help me?
best regards,
Merijn

Restoring is the answer. It sounds as if there is a rogue process constantly draining your battery.
The issue you face is that, if you restore your backup thereafter, you risk the problem coming straight back with your files.
Store your files individually and it is time to start fresh.

Reducing the time for a call to go to voicemail

Similar Messages

Maybe you are looking for