Reference a field from master query in detail query

Hi,
Please tell me how do I reference a field say incident_no in my master query to a detail query.
like
detail.incident_no != master.incident_no
I am joining both the queries using a link. But still I need to reference another field from the first query in my second query. I thought this was possible using formula columns or trigger's. Please help.

Hey Vadim,
That worked. How come.. You know I did it several times before and all it said was, that it was going to create a new parameter field called so and so.
Good, so does it work just this time or always ? just kidding. Reports is so unpredictable, at least for me.
Thanks Vadim,
Joe.

Similar Messages

Start Routine to Populate Account Group Field from Master data of 0Customer

Hello Friends. Please help me edit this ABAP code to make it work. I am putting this code in start routine in between two DSO. where I am using the
Start Routine to Populate Account Group Field from Master data of 0Customer. I do not want to use read from master data functionality since that field 0customer is not there in dso but similar field 0debitor is there. so i want to put this code
during the load from source DSO to Target DSO.
Error Explicit length specifications are necessary with types C, P, X, N und
DATA: L_S_DP_LINE TYPE DATA_PACKAGE_sTRUCTURE.
    types: begin of comp,
     CUSTOMER       type /BI0/OICUSTOMER,
     ACCNT_GRP          type /BI0/OIACCNT_GRP,
   end of comp.
    DATA: l_S_comp type comp.
    DATA: L_th_COMP TYPE HASHED TABLE OF COMP WITH UNIQUE KEY customer INITIAL SIZE 0.
IF L_th_COMP[] IS INITIAL.
SELECT CUSTOMER ACCNT_GRP FROM /BI0/PCUSTOMER APPENDING CORRESPONDING FIELDS OF TABLE L_th_COMP.
ENDIF.
LOOP AT SOURCE_PACKAGE INTO L_S_DP_LINE.
READ TABLE L_TH_COMP INTO L_S_COMP WITH TABLE KEY CUSTOMER = L_s_DP_LINE-CUSTOMER
IF SY-SUBRC = 0.
L_S_DP_LINE-/BIC/ACCNT_GRP = L_S_COMP-/BIC/ACCNT_GRP.
MODIFY SOURCE_PACKAGE FROM L_S_DP_LINE.
ENDIF.
ENDLOOP.
soniya kapoor
Message was edited by:
        soniya kapoor

Hello Wond Thanks for Good Answer and good option, But Client does not like this option and does not like Nav Attribute so he does not want to turn on any Nav Attribute, In general also We hav requirement to read a third table while uploading 1 dso table to 2 dso table,
so Please help me edit this ABAP code to make it work. I am putting this code in start routine in between two DSO. where I am using the
Start Routine to Populate Account Group Field from Master data of 0Customer.
No syntax Error But during the load it is updating the source table and not the target table. how to define now target table.
***SOURCE DSO Table
types: begin of typ_tgl1.
    include type /BIC/AZDAFIAR000.
    types: end of typ_tgl1.
    types: begin of comp,
     CUSTOMER       type /BI0/OICUSTOMER,
     ACCNT_GRP          type /BI0/OIACCNT_GRP,
   end of comp.
DATA: L_th_COMP TYPE HASHED TABLE OF COMP WITH UNIQUE KEY customer
INITIAL SIZE 0.
data: wa_itab type COMP.
    data: wa_zdtg type typ_tgl1.
IF L_th_COMP[] IS INITIAL.
***Master Data Table
SELECT CUSTOMER ACCNT_GRP FROM /BI0/PCUSTOMER APPENDING CORRESPONDING
FIELDS OF TABLE L_th_COMP.
sort L_th_COMP by CUSTOMER.
ENDIF.
LOOP AT L_th_COMP into wa_itab.
select * from /BIC/AZDAFIAR000 into wa_zdtg
                    where DEBITOR eq wa_itab-CUSTOMER. *** SOURCE DSO Table
IF SY-SUBRC = 0.
wa_zdtg-ACCNT_GRP = wa_itab-ACCNT_GRP.
MODIFY /BIC/AZDAFIAR000 from wa_zdtg. *** modify SOURCE DSO Table
ENDIF.
endselect.
    endloop.
soniya kapoor

Display property of key field in master block effects detail blk refreshing

Can anyone throw light on why a screen with the detail block in a straightforward master detail block does not refresh correctly unless one of the two key fields in the master block is displayed? The key field did (of course) exist in the master block - it just was not displaying. As soon as this key field was displayed, then when ever the problem screen was opened or the master block records were paged through, then the detail block refreshes nicely. Disable the display property again and the detail block does not refresh nicely. Found problem in forms 6i. (note, usage of the synchronize function did not change anything)
Did I see similar problem some six or so years ago in forms 4? Ideas anyone?

re rebuild from scratch.
yes, we did rebuild the form from scratch. Original form was generated. Carefully made the same blocks, block relationships etc etc etc and then copied code from old forms triggers and so on carefully over.
re being reproducable
yep, tis so. We are both long term experienced Oracle developers - but this is a weirdy. Got any ideas? If we work anything out we shall certainly update this.

How get all record from master and matching record from detail

hi master
sir i have master detail table
i have many record in master table but some record in detail table how i get
all record from master and matching record from detail
such as
select m.accid,m.title,d.dr,d.cr from master m, detail d where m.accid=d.accid
this query not work that get only related record i need all record from master
please give me idea
thanking you
aamir

hi master
sir i have master detail table
i have many record in master table but some record in
detail table how i get
all record from master and matching record from
detail
such as
select m.accid,m.title,d.dr,d.cr from master m,
detail d where m.accid=d.accid
this query not work that get only related record i
need all record from master
please give me idea
thanking you
aamir
select m.accid,m.title,d.dr,d.cr
from master m, detail d
where m.accid=d.accid (+)The outer join operator (+) will get you all the details from master and any details from the detail if they exist, but the master details will still be got even if there are not details.
Note: Oracle 10g now supports ANSI standard outer joins as in:
select m.accid,m.title,d.dr,d.cr
from master m LEFT OUTER JOIN detail d on m.accid=d.accid

Problems when I copy a text from master page field to body page field

Hello
I am developing a electronic form and I have experimented a strange bebehavior.
When I try to copy a rawvalue of listbox field from master page to textbox field in body page, this works randomly.
I have this code in the validation of the master page field
--------------------begin code---------------------
if (this.rawValue != null && this.rawValue != "")
if (xfa.form.myform.mysubform.mytextfield.rawValue != this.rawvalue)
xfa.form.myform.mysubform.mytextfield.rawValue = this.rawValue;
--------------------end code---------------------
Somebody know what is wrong?
I am very confused.
Thanks a lot for your help.
Hosting Association
The low cost quality hosting
http://www.hostingassociation.biz

Extra code is one of the pitfalls of using WYSIWYG cutting and pasting,
and using styling in general.
So while it may be interesting to try to reduce the amount of code, there
probably won't be any direct approach without extra steps to get you what
you want with bare bones code that appears as you want it to or at least acceptable.
I guess you might have to take a screen image, clip the relevant portion, since
you can only attach an image file here not a text file.
Posting a screen shot
* http://kb.mozillazine.org/Posting_a_screenshot_on_the_forum#Windows

When moving from one master block to detail block it must save record.

when moving from master block to detail block it must save record or it will give message like 'save changes '....
when i write it ,but this message will be coming.
But if i save record message will appear two times.
plz Help me.
Thanks & Regards
Venkata.
Message was edited by:
venkata

Hi,
you could ask for Form_Success when moving to detail_block (in wehn-new-block-instance i.e.) and if not form_success you could show an alert to ask for commit changes...
Jose.

I need to add a single field from with_item table . need to write select query with reference to company code , account doc no , fiscal year

I need to add a single field from with_item table . need to write select query with reference to company code , account doc no , fiscal year

Hi Arun ,
Can you explain little bit more ??
what is account doc no?
what are the transactions should be displayed in your output??
-Rajesh N

ADF Faces Query Panel: How to display master data in detail table?

Before stating the question, here is the background:
I've a Fusion ADF (model/viewController) app that includes 2 tables with a master-detail relationship. The master table stores error numbers and associated levels of logging severity; the detail table stores the actual message text. These need to be separate, related tables because the requirement is that message text for a given error number can vary by product release.
Messages are added in a bounded task flow; data for the master table entered in 1 fragment, data for the detail table in a 2nd page fragment. In the app, the Entity Objects for these tables are related with a foreign key association and have a composition association. This was done because the error numbers are generated in an Oracle DB sequence, and from what i have read that is a way in a task flow to have ADF put the number generated for the master table into the related key of the child table.
The question is this:
I need to create an ADF query panel with a table that searches on the detail DB table. However, i also need to use a couple of fields from the master DB table in both the query and in the ADF table. In addition, I need to add the ability for the user to edit either the master or detail record for the row he/she selects in the ADF table. I know how to create a view that would display the info i need; however, i have not been able to figure out how to obtain the keys for the selected ADF table row and pass them to the task flows that would edit.
The master table has a numeric primary key. The detail table primary key consists of a foreign key to the master key and also a release number.
I'm new to ADF and have been struggling with how to do this: i've a workaround that is functional but too klunky to be a permanent solution. So, could someone point me to some information on how to accomplish this?
Versions: JDeveloper 11.1.1.4, ADF Business Components 11.1.1.59.23
Thanks for your help!

Thanks. I tried this out, but ran into an issue in that the detail table has 2 keys - a foreign key to the master primary key, and a 2nd key that uniquely distinguishes the detail. So i tried various things centered around using the SetCurrentRowWithKey operation and trying to obtain the selected ADF table row using an EL OF #{data.<pageDef>.<Iterator>.currentRowKeyString}; however i could not get the detail record for the selected row to display.
I did find another approach that worked - I am wondering, is there anything problematic with this approach?:
1. Create a VO joining the Master and Detail tables, with the Detail table being updatable.
2. Made sure the applicable attributes were defined as keys.
3. Add a query panel w/table using this VO.
4. Create an ADF form based on the VO, showing the updatable fields.
5. Create a bounded task flow with the following set on the Behavior tab:
a. Share data controls with calling task flow
b. Always Begin Transaction
I specifically am wondering whether "Share data controls with calling task flow" has any negative implications or gotchas to handle. The doc at http://download.oracle.com/docs/cd/E21764_01/web.1111/b31974/taskflows_parameters.htm#ADFFD1693 doesn't suggest so, but just wanted to double-check before I go down this path.

Master Detail Query automatic query ..Urgent help

In my last question, I asked about how to automatically query a form based on table or master detail and gota good answer. What I actually need to do is also query on the detail, for example
select a.user_id, b.week_ending,b.mon_hrs,b.tues_hrs
from emp_profile a, time_reporting_week b
where user_id = portal30.wwctx_api.get_user
and week_ending = '02-JAN-02'
and a.user_id = b.user_id
So I know that I can query on master table which is emp profile, but I also need to query on week ending which is in detail. Do I change the clause in my form pacjage?Or should I change something in Additional Pl/sql ??

There are two ways to achieve this. Both methods have some drawbacks, so please go through them and choose the one that suits you.
Method 1:
=========
This method does not require altering the form package.
Assumptions : The detail table has a column named WEEK_ENDING.
Steps :-
1> Edit the form and select the query button in the left frame of the master section.
2> For the pl/sql button event handler, choose the action as Query and replace the default code with the following :-
declare
l_where varchar2(4000);
l_where_pre varchar2(4000);
l_where_post varchar2(4000);
l_where_pos integer;
l_week_ending varchar2(4000);
l_lang varchar2(4000);
begin
p_session.get_shadow_value(
p_block_name => 'DETAIL_BLOCK',
p_attribute_name => 'A_WEEK_ENDING',
p_index => 1,
p_value => l_week_ending,
p_language => l_lang);
doQuery;
if l_week_ending is not null then
l_where := p_session.get_value_as_varchar2(
p_block_name => 'DEFAULT',
p_attribute_name => '_DETAIL_WHERE_CLAUSE',
p_index => 1
l_where_pos := instr(l_where,' WHERE ');
l_where_pre := substr(l_where,1,l_where_pos+6);
l_where_post := substr(l_where,l_where_pos+7);
l_where_post := 'week_ending = '||l_week_ending||' and '||l_where_post;
l_where := l_where_pre || l_where_post;
p_session.set_value(
p_block_name => 'DEFAULT',
p_attribute_name => '_DETAIL_WHERE_CLAUSE',
p_value => l_where,
p_index => 1);
QueryDetail(
p_mode => 'QUERY' ,
p_session => p_session);
end if;
end;
3> Click on OK to finish editing the form.
4> Run the form - enter query criteria for the master fields and enter the week-ending criterion in the 1st detail
field under Week Ending. Click the Query button.
Advantage:
You will not lose your changes even if you edit the form later on.
Drawback:
In this method, the querying process will be bit slow as we are querying for the detail records twice.
Once through onQuery and the second time after constructing the new where clause with the additional conditon
for the detail rows.
Method 2
========
This method requires altering the form generated package.
Steps :-
1> In the form package, you will find a onQuery procedure. Towards the end of the procedure, you will find a statement like
"_detail_where_cond" := "_detail_where_cond" || ' WHERE ' || ...
2> As the name of the variable suggests, this where condition will be used while querying the detail block. You need to
add a new clause to this for the week_ending column. Prior to that you need to fetch the shadow value for A_WEEK_ENDING.
3> Your altered code should look something like :-
p_session.get_shadow_value(
p_block_name => 'DETAIL_BLOCK',
p_attribute_name => 'A_WEEK_ENDING',
p_index => 1,
p_value => l_week_ending,
p_language => l_lang);
if l_week_ending is not null then
"_detail_where_cond" := "_detail_where_cond" || ' WHERE WEEK_ENDING = ' || l_week_ending || ' AND ' || --existing code
else
--- use the original code here
"_detail_where_cond" := "_detail_where_cond" || ' WHERE ' || ...
end if;
4> Compile the package body and run the form.
Advantage:
In this method we will be querying the detail rows just once. Unlike in method 1.
Disadvantage:
You will lose your alterations once you create a new version of the form by editing it. You need to recompile the package
after re-introducing your changes.

Query from master data

I am trying to create a structure to create a query as follows from 0EMPLOYEE master data. I have ceated a BI infoset with 0EMPLOYEE and using that to create this query. This query is intened to be used as the receiver query in RRI.
Sender Query (query1):
                              Employee Distribution by perfromace rating
Performance Rating Before_Min Below Above Total
Receiver Query (query2) : this should feed the employees used in query1 and get their attributes in a query
Employee       Last_Name First_Name, Annual_Salary
    A
    B
Qns:
1, What is the best approach to get this?
2. How do I create a characteristic query for Employee (without key figures) as in qurey-2
Amy help is apprecaiated.
Thanks in advance

Hi Bob,
Thanks for your message. I got the receiver query working by configuring the infoobject as a infoprovider and getting "# of records" as the dummy KF into the query and hide it. I need to clean up to supress results reow.
For connectign to this query as RRI, in the assignment details, do I use it as an Infoobject - parameter for 0EMPLOYEE or any other setting. I used the above settings and see more employees in the list than I had expected. i don't see the employee ids being passed on from Q1 to Q2 to provide a reduced result set when I limit the scope in q1 (eg: by filtering using the org unit or personnel area).
Any clues?
Thanks
Raj

Is there a way to exclude temporary people picker fields from a query when receiving the "List View Lookup Threshold" error.

Hi All,
My users require the ability to select a sharepoint group from a drop down list and then be able to select a user from a people picker based on the drop down selection.    The best solution I was able to up with, was create a people picker
for each drop down selection and set the Sharepoint group field to the selected group.  All people picker filed are hidden except the one that matches the drop down selection. When creating an entry from the sharepoint list this method
works perfectly.
However, when I add the list onto a site page using an "Listview webpart", then add an infopath web part and then finally connect the two parts, I get a "List View Lookup Threshold" error when selecting an entry from the list. I
understand from the error and reading that this error is related to the number of People pickers in the list.   Is there a way to exclude temporary people picker fields from a site page query, as they are only temporary fields to allow the users
to select a person and then assign the name to another field.
Dwayne

Hi Dwayne,
In SharePoint 2013, we could manually create a list for all users. Here are the reference:
Go to Site Settings > People and Groups > SiteMembers
Modify url
http://sitename/_layouts/15/people.aspx?MembershipGroupId=8 to
http://sp/sites/tutu/_layouts/15/people.aspx?MembershipGroupId=0 , now you will see All people in this site.
Change the view to List view, and copy the listview id in the url
http://sitename/_layouts/15/people.aspx?MembershipGroupId=0&View={viewID}
Go to Settings > List settings, copy the list id in the url
http://sitename/_layouts/15/listedit.aspx?List=listeid&Source=....
Now type the address in IE:
http://sitename/_vti_bin/owssvr.dll?CS=109&Using=_layouts/query.iqy&List=[LISTID]&View=[VIEWID]&CacheControl , such as
http://sp/sites/tutu/_vti_bin/owssvr.dll?CS=109&Using=_layouts/query.iqy&List=f3958d27-9c2f-4f8d-b221-89466e816667&View=696BFDC5-0C6E-4E27-818F-0E6292A18407&CacheControl=1
Save the owssvr.jqy from SharePoint site
Now you could see the file in your desktop with all users, save it as allusers in Excel.
Then import it to your SharePoint site, add an app > find an app > import spreadsheet
Regards,
Rebecca Tu
TechNet Community Support

Passing YTD selection from a main query to a detailed query using RRI

Hi,
We have created two queries: one main query on an infocube for aggregated data, one detailed query on the feeding DSO for data at the level of sales document items.
Both queries show monthly and YTD (year-to-date) actual cost figures.
The user enters for instance the month of 05.2005 on the main query in a variable ZP_MONTH.
A user exit variable ZS_YTD is calculated so that the interval 01.2005 - 05.2005 is stored in ZS_YTD.
Revenues in the month are displayed in one column.
Revenues in the YTD period are displayed in another column.
Assume the data is displayed by document types.
Then the user should select the document type and perform a jump target (Goto) to the detailed query to see which sales document items are contributing to the total revenues behind the document type.
We have defined a ZS_YTD_2 variable on the detailed query. It is used in the field assignments in the RSBBS transaction to receive the 0CALMONTH selection (in our case 01.2005 - 05.2005). Then on the detailed query, we defined another userexit variable to capture the selected month based on ZS_YTD_2.
Our issue is that when the user goes from the main query to the detailed query, the variable screen of the detailed query is being displayed with the variable ZS_YTD_2 open and the user can even change the selection there.
Is it possible to remove the display of this intermediate variable screen?
Thanks.

Well. If you unflag the variable for ready for input on the detailed query, then it is not possible for that variable to receive the period selected on the main query. Even worse, the query crashes with the message that the variable is not correctly defined.
Any other suggestion?
Thanks.

Data Template---master details query--Help

Hi
we are using XML Publisher attached to R12 , we are using data template ( .XML file) in data definition .
we have a requirement for master details report. for that we have parent query and child query .the data coming to parent query should be the parameter to child query
Exp-- Parent Query-- select empno from emp
Child Query --select * from dept where empno=:p_empno (p_empno =empno from Parent query )
For this requirement we are creating a data template (.XML file) . we are successfully to write for the parent query, but we fails when come to child query. Please help us how it can be wrote in data template . You can send any example related to this issue.

Parent Query - select empno as emp_no from emp
Child Query - select * from empno where empno=:emp_no

Querying a Detail Master relation

Hai All,
Can anyone suggest me how to get the Find window option based on the Detail block.
Presently I am creating a view based on the required column from the Master and the detail block, creating a find window based on this view, from that I am tracking the header Id and getting the required master detail information.
Is there any othere way to directly query the detail block from the find window and get the Master Detail Relation.
Thanks In Advance........

Hi Lalit
If the Both the blocks are based on same table then manually create relationship
b/w them , like go_block(detail) and Execute_query with the where clause .
If default relation ship is created
using wizard then check out for the coding .
Otherwise there should not be any problem .
With Regards
Harish
null

Master/Detail query problem

I have two VO, masterVo and detailVo, which assoicated with a VL.
I create a page to query the masterVo and show the result master data and related detail data.
Can I add a query criteria to filter the detailVo?
Now I can only set where clauses in masterVo, is it possible to set where clauses both in masterVo and detailVo?

I don't use query region for my master/detail data query, because the query result is in hgrid region on the other page.
So I use controller to send the query criteria into AM for query. In masterVoImpl.java, I combine query
criteria to Where clauses to initiate query. I have one query criteria belong to detailVo attr, How can I put the detailVo criteria
and masterVo query criteria at one query?
Thanks a lot.
Louis

Reference a field from master query in detail query

Similar Messages

Maybe you are looking for