Refresh/Reprocess view from another view.

Hi all,
I'm facing a problem with reprocessing a view in webgui:
In component BT126H_CALL i've created a new assignment block ZREGDETAILS based on a Z-table which contains products.
Also in component BT126H_CALL i've enhanced a view SCDETAILS and added a total-field (ztotal) that should show the total value of the records in ZREGDETAILS.
My problem is now that view SCDETAILS is processed before ZREGDETAILS, so I cannot update the ztotal field... How can I call the SCDETAILS to be reprocessed again from the ZREGDETAILS view?
In other projects I used folowing code for calling the save event on ZREGDETAILS from another view. But in this case the SCDETAILS is not a subcontroller of ZREGDETAILS.
DATA: sub_contr TYPE REF TO CL_BSP_WD_VIEW_CONTROLLER,
        contr_regdetails TYPE REF TO ZL_ZBT126H__REGDETAILS_IMPL.
sub_contr = ME->GET_SUBCONTROLLER_BY_VIEWNAME('ZBT126H_CALL/ZRegdetails').
IF sub_contr is bound.
    contr_regdetails ?= sub_contr.
    contr_regdetails->Save( ).
ENDIF.
Many thanks in advance!
Siegfried

Hi Pooja,
According to my understanding on action of radio buttons i hope you are calling some other component so on action of the radio button may be it might be any of the radio button u can set the radio buttons as it was initially and then call the screen ...
Setting the radio buttons should be done in the action of radio buttons... By doing this i hope that radio buttons will be set and second view also will be calleed when we go back to the screen we can view the radio buttons refreshed.. Try this hope it might be helpful...
Regards,
Sana.

Similar Messages

How to refer one view from another view?

Hi,
I have 2 views in my Adobe Flash Builder mobile app. I need to refer the first view in my second view.
How to refer one view from another view? Or how to create a reference to a view wherever needed?

I don't need any data from my first view. In a certain flow, I need to make my first view to be invisible.
for eg., My First view is in portrait mode. I change the device to Landscape. In the landscape mode, I want to show a completely different view (second view).
In this case, what happens is, I see my first view in Landscape mode for a second. Then the second view appears. When I change to Landscape mode, only the second view should be seen. I need to make my first view to be completely invisible in the OnOrientationChanging event of
StageOrientationEvent
As stage object and StageOrientationEvent works at application level, I need to know how to refer my first view object in the application level.
private function onOrientationChanging(soe:StageOrientationEvent):void
MyFirstView.Visible = False; ====> don't know how to refer MyFirstView here
Is my question clear now?

Opening a view from another view of the same window in diff Browser.

Hi Experts,
My requirement is to open a view (say view 2) from another view (say view 1) with click of a button in a different browser, both the views are embedded into the same window, and also i have to pass some data from view1 to view2, based no the input data, i am displaying some information. Also both views belog to the same component.
Some pointers on this would be of great help.
Regards,
Ashish.

You would need to open another window.
See if_wd_window and if_wd_window_manager.
Call the GET_API to get a handle to window manager.
The new window can show V2.
The original Window with 2 views,
must fire plug to navigate v2 to empty view to hide it from Window1.
The to Views talk to one another via WDC Controller.
View 2 calls WDC controller methods. The WDC controller the fires Event.
View 1 can listen to this event with a method of type event handler.
View 1 can for example react to button on View 2 and close WINDOW 2.
Good luck
Phil.

How modify data one view from another view in Cluster view

Hi,
I have a cluster view which includes two independent maintenance views. These views have not a direct relationship.
If I would append or change or delete records in the first view I want to add or change or delete some records in the second view.
1.
I have tried to use Extended Table Maintenance Events of the first view to modify the second but I cant access to the TOTAL and EXTRACT tables the second view from the fist view.
Is there any way to get access from one view to another using Extended Table Maintenance Events?
2.
I have tried to use the Event 04/VC: Before Saving the Data in the Database of the cluster view. I can access and modify the second view internal table using routines
READ TABLE vcl_struc_tab WITH KEY object = 'ZFIRST_VIEW' INTO structab_wa.
if not structab_wa-UPD_REQU is initial.
   perform VCL_SET_TABLE_ACCESS_FOR_OBJ using 'ZSECOND_VIEW' changing error_flag.
   it_tbl_second = <VCL_TOTAL>.
   loop at it_tbl_second into wa_second.
     wa_tbl_second-vim_action = 'U'.
     modify it_tbl_second from wa_second
   endloop.
endif.
But to save modified entries of the second view to database I have to twice press SAVE buttons.
The first time I have pressed SAVE above routines are executed and modified entries appear only in the second view internal table. The second time I have pressed SAVE modified entries appear in the database.
I would like user press SAVE button only once. How I can do it?
Regards,
Malnor
Edited by: Malnor on Nov 30, 2010 9:11 PM

If I would append or change or delete records in the first view I want to add or change or delete some records in the second view
Without a dependant field how will you perform this operation ?
You have to link the fields in the tables, generate maintenance view, add it to cluster view and do it.

UI5 load view from another view

Hi all,
I'm trying to load a view from an external project. The idea being that a view can be used by multiple projects to cater for reuse e.g a view that has different view modes, user role privileges etc.
however I can't seem to find a way to find out how to do it. I've been trying to use the sap.ui.localResources function but that only looks locally (obviously). I can also register the folder structure using the jQuery.sap.registerModulePath but then when trying to combine it with embedding a view, it uses a different path, off the UI5 resource root.
Has anyone else been able to do this? It feels like something that should be possible (like normal web project dependency) but I can't figure it out.
If you can help or refer me to some documentation then that would be great!
Thanks
Mark

the issue was because of the path name ABC
since you views in project two are defined using application.viewOne / application.viewTwo -
i had to register the path using the same name
$.sap.registerModulePath("application", "../projectTwo/application");
var view2 = sap.ui.jsview("application.viewTwo");
here is the index.html
<!DOCTYPE HTML>
<html>
<head>
<meta http-equiv="X-UA-Compatible" content="IE=edge">
<script src="https://sapui5.hana.ondemand.com/resources/sap-ui-core.js"
id="sap-ui-bootstrap"
data-sap-ui-libs="sap.ui.commons"
data-sap-ui-theme="sap_goldreflection">
</script>

<script src="js/bootstrap.js"></script>
<script>
sap.ui.localResources("application");
var view = sap.ui.jsview("application.viewOne");
view.placeAt("viewOneContainer");
//$.sap.registerModulePath("ABC", "../projectTwo/application");
$.sap.registerModulePath("application", "../projectTwo/application");
var view2 = sap.ui.jsview("application.viewTwo");
view2.placeAt("viewTwoContainer2");
</script>
</head>
<body class="sapUiBody" role="application">
<div id="viewOneContainer"></div>
<div id="viewTwoContainer2"></div>
</body>
</html>

How to call a view from another

Hello Experts,
        I have embedded a view (let us call this view 'A') in standard homepage. This works fine. Now on click of a button on this embedded view I want to launch another view that is also created by me, in the same component in which I had created view A. But I do not know how to launch this second view
     Could you please tell me how to call/launch a view from another on click of a button?
Regards,
Prafful

Hello Prafful,
I guess by launching you mean substituting one view by another. It can be achieved by declaring a navigational link in the runtime repository from one view to another. You have to create an event handler on the button and outbound plug in your view using the wizard. Then, on the event handler you call an outbound plug where you trigger a navigation using this navigational link and the view A will be replaced by view B.
A code which needs to be done in outbound plug:
me->view_manager->navigate(
source_rep_view = me->rep_view
outbound_plug   = 'NAVLINKNAME'
data_collection = iv_data_collection ).
Best Regards,
Yevgen

HOW TO GET THE SELECTED VALUE IN A ROW FROM ONE VIEW TO ANOTHER VIEW?

hi all,
I have a small issue.
i have created two views.In the table of the first view i'm selecting a row and pressing the button it will move to next view.
i am adding some fields manually in the table of the second view and pressing the save button.Here all the values should get updated corresponding to the field which i have selected in the first view.
I want to know how to get the particular field in the selected row from one view to another view.
Kindly help me.

Hi,
Any data sharing accross views can be achiveved by defining CONTEXT data in COMPONENT CONTROLLER and mapping it to the CONTEXT of all the views. Follow the below steps.
1. Define a CONTEXT NODE in component controller
2. Define same CONTEXT NODE in all the views where this has to be accessed & changed.
3. Go to CONTEXT NODE of each view, right click on the node and choose DEFINE MAPPING.
This is how you map CONTEXT NODE and same can be accessed/changed from any VIEW or even from COMPONENT CONTROLLER. Any change happens at one VIEW will be automatically available in others.
Check the below link for more info regarding same.
[http://help.sap.com/saphelp_nw04s/helpdata/EN/48/444941db42f423e10000000a155106/content.htm]
Regards,
Manne.

How to pass field symbol or table from one view to another view in abap web dynpro?

I am creating an Inbound Outbound ALV report in ABAP Web Dynpro. However at selection-screen I have select options and fetching is done at view2. Problem is we can pass parameter using inbound outbound parameters but how to pass internal table or field-symbols from one view to another view? I made use of Assistance Class too but its not very clear to me. Please give me some example or code to sort this problem out.

I am creating an Inbound Outbound ALV report in ABAP Web Dynpro. However at selection-screen I have select options and fetching is done at view2. Problem is we can pass parameter using inbound outbound parameters but how to pass internal table or field-symbols from one view to another view? I made use of Assistance Class too but its not very clear to me. Please give me some example or code to sort this problem out.

Passing Multiple table row from one view to another view

Hi,
How to Passing Multiple table row from one view to another view in Web Dynpro Abap. (Table UI Element)
thanx....

Hi Ganesh,
Kindly do search before posting.. this discussed many times..
First create your context in component controller, and do context mapping in two views so that you can get values from
one veiw to any views.
and for multiple selection, for table we have property selection mode.. set as multi and remember context node selection
selection cardinality shoud be 0-n.
so, select n no of rows and based on some action call sec view and display data.( i think you know navigation between veiw ).
Pelase check this...for multi selection
Re: How to copy data from one node to another or fromone table to another table
for navigation.. check
navigation between the views
Cheers,
Kris.

How to include one view into another view

Hi SDN's,
               Could any please tell me,How to include one view into another view.
In my requirment.I want to create a 'Z' view for an interface .In that view i have to take,
1) Ship-to-email adrr by
                          LIKP-KUNNR -> KNA1-ADRNR
                          KNA1-ADRNR -> ADR6-ADDRESNUMBER.
2) E-mail addr of person who created the document.i.e
    LIKP-ERNAM -> USR21-BNAME.
    USR21-ADDRESNUMBER -> ADR6-ADDRESNUMBER
    USR21-PERSNUMBER -> ADR6-PERSNUMBER.
   In both the case we have to pass ADDRESSNUMBER to ADR6 table.
If we pass these condition it fails,B'Coz at a time it passes Two ADDRESSNUMBER and a PERSNUMBER.
So i created two which fetches only the email addr of person who created the document.and another view fetches Ship-to-email addr.
Now i want to include the second view into first view . Is it possible?or please
tell me someother way to get these email addresses in a single view.

hi
as per my knowledge, nested views are not possible. However, while creating a new view, selection method will not giv u option to select the already created view(S) except the tables..i think so.
regards,
shamim

I can't change the view from player view to grid view in youtube

i have a problem with youtube, i can't change the view from player view to grid view on channels that i visit, and that just happen with firefox, it dosent happen with explorer, so what can i do please?
== This happened ==
Not sure how often

it didn't unfortunately, and i think that the problem in the JavaScript , Because when I click on the grid view icon i see on the bottom of the page "JavaScript" see the image:

How to call a view from Interface view

Folks,
How to call a view from interface view (onPlugDefault method) . I was trying to set context of controller but it is not working . What is the work around.
Manish

Hi Manish,
An interface view is created for each window that you have, which in-turn has views embedded, one of which is default. If you want to pass data which you have in your interface view, do the following
- Add your component controller in your interface view properties
- In the onPlugDefault method(I assume this is where you have the data available through URL parameters),set the component controller context variables like
wdThis.wdGetComContr.wdGetContext().currentContextElement().setName("John");
-Access these context variables in your view as well by adding the component controller as the required controller
Your default view will appear automatically when you call the application.
Regards,
LM

How to call Comp1 View From Comp2 View in CE 7.1

Hi Experts,
I need to develop an application to call Comp1 View from Comp2 View (Inter Component Communication).
This application developing CE 7.1 NWDS 7.1 not in NWDS 7.0.
Please any one help me.
Regards,
Satya.

Hi Satya ,
please go though following blog for used DC concept.
Componentization of Webdynpro Application in CE7.1
In netweaver 7.1 interface controler is abstract and component controller is implementing interface controller so the context data and methods have to be implemented by component controller

Call method with an argument from another view controller

I have a UIViewController MainViewController that brings up a modal view that is of the class AddPlayerViewController. When the user clicks 'Save' in the modal view I need to pass the Player data (which is a Player class) from the modal view to the MainViewController in addition to triggering a method in the MainViewController. What's the best way to accomplish this? I'm new to cocoa and have only tried using delegates and some ugly hacks to no avail.
Thanks for the help.

If I understand correctly, you have:
1. A model object, Player.
2. A top view controller, MainViewController.
3. Another view controller, AddPlayerViewController, which MainViewController displays modally.
I'm guessing that AddPlayerViewController creates a new Player object and lets the user set its values, and you need a way to get that new Player into MainViewController once they're done.
So, here's what I'd do:
1. Create an AddPlayerViewControllerDelegate protocol. It should declare two methods, "- (void)addPlayerViewController:(AddPlayerViewContrller*)controller didAddPlayer:(Player*)newPlayer" and "- (void)addPlayerViewControllerNotAddingPlayer:(AddPlayerViewController*)controll er".
2. Add an attribute of type "id <AddPlayerViewControllerDelegate>" called delegate to AddPlayerViewController. Also add a property with "@property (assign)" and "@synthesize".
3. Modify AddPlayerViewController so that if you click the "Save" button, addPlayerViewController:didAddPlayer: gets called, passing "self" and the new Player object as the two arguments. Also arrange for clicking the "Cancel" button to call addPlayerViewControllerNotAddingPlayer:.
4. Modify MainViewController to declare that it conforms to AddPlayerViewControllerDelegate. Implement those two methods (addPlayerViewControllerNotAddingPlayer: might be an empty method if you don't want to do anything).
5. When you create your AddPlayerViewController, set its delegate to your MainViewController.
If you need more detail, let me know what parts you need me to elaborate on.

How to navigate from one view to another view?

Hi everyone facing a problem in navigation when i click on the list another view should be appear..
page1.view.js:-
list1.onclick=function(evt){
$.sap.require("sap.ui.core.EventBus");
var bus=sap.ui.getCore().getEventBus();
bus.publish("nav","to",{
id:"idDemoUI2", //..id of page2...//
context:evt.getSource().getBindingContext()
page2.controller.js:-
onBeforeRendering: function(evt) {
if (evt.data.context) {
this.getView().setBindingContext(evt.data.context);
i have a list i want when i click one the row of that list another view will appear so i use onclick event on the list and then use bus for navigation and recieving data in the target page but its not working anyone please tell me where i am wrong.
Regards
Kelvin

Hi Kelvin,
How about using Routing concept than the getEventBus. Below link should help:
Step 3: Navigation and Routing - User Interface Add-On for SAP NetWeaver - SAP Library

Refresh/Reprocess view from another view.

Similar Messages

Maybe you are looking for