Reg:Bex query

Hi,
I need to develop a query with Purchase requisition to PO delivery history. For this we have 22 feilds.
Among them 18 fields we have identified in Bw(Multiprovider). for remaining our MM and abap team developing logics.
So after enhancing them in R/3 side how to proceed. this is 3.x flow and am new to this. so need u r help.
After enhancing fields how to modify the flow in bw ?? Thanks in advance.
Br,
Ravi

Any reply??

Similar Messages

  • Problem with Queries Structures in Bex Query Designer and Universe Designer

    Hi everyone,
    I have a problem when i try to do a Universe from a Bex Query Designer.
    When I use a Characteristic Restrictions in a Structure, the universe only show me the structure without the objects inside it.
    EJ:
    1) Bex Query Designer
    Colunms
    (Structure) ZSRT_123
                          - (Characteristic Restrictions) Reg Guayana
    >          (InfoObject)     0Product = 'XXX'
    >          (InfoObject)     0Country = 'YYY'
         - (Characteristic Restrictions) Reg Caracas
    >          (InfoObject)     0Product = 'AAA'
    >          (InfoObject)     0Country = 'BBB'
    Rows
    (Structure) ZSRT_456
                   (Key Figure)     Net Sales
    2) Universe designer
    (Class) ZSRT_456
    >(Measure)      Net Sale
    (Class)     ZSRT_123
    >(Dimension)      ZSRT_123
    The universe dont translate the two Characteristic Restrictions in the structure ZSRT_123.
    Any information would be much appreciated. Thank you.

    Hi,
    I assume that you are using BOE XI 3.1 SP2.
    We have added an option in SP2 to generate or not the L00 level.
    Unfortunately this option applies not only on characteristics but also on hierarchies, hierarchies variables and structures: that's the reason why you have no elements belonging to the structure generated.
    I recommend to always generate L00 in order to have your structure generated correctly.
    This issue will be fixed in SP3.
    Regards,
    Didier

  • Error while integrating BEx Query with Cognos

    Hi all,
    we have made 999 rows and 150 columns..
    but we r unable  to integrate it with cognos if we remove free characteristics....
    and it thows me the following error
    1.BAP-ERR-0002 a BAPI error has occured in the function module RFC_READ_TABLE. NOT_AUTHORIZED
    2.error when generating data provider
    3.Query is too large
    Please do reply immediately with the correct solution
    Regards
    Madhavi

    Hi Vani Reddy
    Jus one quick finding are there any new patches upgrade taken place in your system . its in generally occurs because patch issues please refer the following note  1325527.
    it may helps you in this reg.
    Hope its clear a little..!
    Thanks
    K M R
    ***Even if you have nothing, you can get anything.
    But your attitude & approach should be positive..!****
    >
    vani reddy wrote:
    > Hi All,
    >
    > While executing Bex Query user is getting below error message after 20 mins and coming out of BEx.
    >
    >
    >
    > Error Group
    >
    > RFC_ERROR_SYSTEM_FAILURE
    >
    > Message
    >
    > An exception that could not be cought occured.
    >
    > Thanks in advance
    > Vani
    Edited by: K M R on Aug 12, 2009 2:14 PM

  • Bex Query Exception Not Appearing In Bex Report

    I have a created an exception in a Bex Query and built a report using the Bex Report Designer. But the exceptions that work fine in the query dont seem to work once I've embedded the query in a report. Is this right? is it not possible to use exceptions in a report or do I need to turn something on etc?
    Any help much apreciated.

    Hi Joel,
    Pls refer the OSS # 331772 reg. this limitation. Exceptions if applied will not be dynamic in RD.
    Report designer is a flat structure. You cannot collapse or expand the static columns. Hence, Conditions/Exceptions are not supported in Report Designer. You may try alternatively in WAD. It will surely work in WAD for formatted web based reports.
    Thanks,
    Arun Bala

  • Bex Query Get Qty of previous day

    Hello,
    I have a requirement and I'm not sure if it possible to design a bex query for it
    I have the stock data for each date.In my report I need to display the current day stock,previous day stock and the delta.
    The layout should be like below
                   Calendar day  01.01.2009    02.01.2009  03.01.2009 .........
    Stock                          |           200 |            350   |         425  |
    Stock previous day       |           100 |            200   |         350  |
    Delta                           |           100 |            150   |           75  |
    To get the current day stock is simple,it will just get the stock associated with that calendar day but to fetch the previous day stock i'm not sure how to set the fillter.
    Any suggestions please?
    Thank You.
    Edited by: A Pothuneedi on Apr 27, 2009 4:43 PM

    Hi,
    Select Stock Prv Day - Right Click--> Edit- now Find the Time dimension and Select CALDAY and drag drop right side.
    Right click on calday Select Restrict --> Select the variable which created move it to right side and give offset as -1. You will find offset setting above.
    Please do this and let us know if still have any issues.
    Reg
    Pra

  • How to Generate a MDX statement using a BEX query

    Hello,
    Is there any possiblity in BW to generate a MDX statement using a BEx query?
    Thanks,
    Ravi

    BW does not generate any MDX statement for Bex query.I have tried ample number of times to acheive this but failed.
    Like an Infocube the Query is also an object where in you can write MDX queries on BEx Queries.
    As it is I never found BW rendering MDX queries.But with MDX queries you can get something but how far it helps I don't know.
    RSCRM_BAPI is obsolete and it is recommended to use RSCRM_REPORT somewhere I have read ,but when I went to that transaction I never found that "MDX" button at all.
    It was converted to "OLAP Check" which gave me some warning on the key figures and that's it.
    Somehow I feel BW is not comfortable with MDX.
    Regs
    Gopi

  • IF and ABS condition statement in BEX query designer

    Hi,
    I would like to ask the best way for me to produce an acceptable result from Excel IF and ABS Condition statement.
    The condition statement that I have on my Excel file is
    =IF((A2-B2)>0,ABS(A2-B2),0)
    I'm trying multiple times to reproduce this in BEX Query designer, unfortunately I'm getting a bad result or unacceptable formula.
    Anyone who could help me with my issue?
    Thanks,
    Arnold

    Hi Arnold,
    Thank you,
    Nanda

  • Error while trying to Open and Delete a BEx Query in Query Designer.

    Hi Experts,
    I have been facing this issue with BEx Query in Designer mode for a couple of days now in Development Environment in BI 7.0.
    I would like to Delete an unwanted BEx Query because I need to give it's name to another BEx Query.
    Whenever I try to Open this Query in BEx Query Designer to Delete, it gives out an error saying:
    "An error occurred while communicating with the BI server.
    As a result of this error, the system has been
    disconnected from the BI server.
    Detailed Description:
    STOP: Program error is class SAPMSSY1 method : UNCAUGHT_EXCEPTION
    STOP: System eror in program CL_RSR and form GET_CHANMID-01 - (see long text)"
    Details text is as below:
    Diagnosis
    This internal error is an intended termination resulting from a program state that is not permitted.
    Procedure
    Analyze the situation and inform SAP.
    If the termination occurred when you executed a query or Web template, or during interaction in the planning modeler, and if you can reproduce this termination, record a trace (transaction RSTT).
    For more information about recording a trace, see the documentation for the trace tool environment as well as SAP Note 899572.
    I have tried with SAP Note 899572, but still it's the same.
    Has anyone faced similar issue? Could you please let me know if you have better ideas or solution?
    Your time is much appreciated.
    Thanks,
    Chandu

    Arun - Thanks a million. You saved me Nine. It worked.
    Could you also please tell me how to rename (Technical) a Query or is it still "Save the Query As" the only way...?
    Points already assigned.
    Thanks,
    Chandu

  • How can we remove the commas from the Formula value in SAP BW BEx query

    Hi All,
    How can we remove the commas from the Formula value in SAP BW BEx query
    We are using the formula replacing with characteristic.The characteristic value needs to be display as number with out commas.
    Regards
    Venkat.

    Do you want to remove the commas when you run the query on Bex Web or in RSRT?
    Regards

  • Field Explorer in Crystal Reports does not show the same names as Bex Query

    Hi
    I have crystal reports, I can retrieve data from BW Bex Query. But in the field explorer it does not show the names as in the Bex query designer.
    In the Bex query designer a field will have the following technical name 0Debitor and the description is Customer.
    It shows in crystal reports in the field explorer twice as D[0DEBITOR]D and D[0DEBITOR]D. It also does not seperate key figures and characteristics.
    I would like it to display the field explorer as shown in this blog.
    /people/ingo.hilgefort/blog/2008/02/19/businessobjects-and-sap-part-2
    Thanks in advance

    Hi,
    take a look here:
    /people/ingo.hilgefort/blog/2008/02/19/businessobjects-and-sap-part-2
    make sure you are using the MDX Driver and what happens is that you will see several fields per characteristic. example: one for the key, one for the description, several if modelled for the display attributes
    Ingo

  • Two problmes between  Crystal Reports 2008 and Bex Query

    Hi Gurus.
    I have two problems with Crystal Reports 2008 when It obtains data from a Bex Query (SAP MDX query connection).
    1)     I have defined some Parameters Fields using the follow options:
    Type: String
    List of Values: Dynamic
    Value Options Level1:
                         Show on (Viewer) Panel :Editable
                          Prompt text: <text>
                          Sort Order: Ascending by value
                          Prompt With description Only : False
                          Optional Prompt: True
                          Allow multiple values: True
                          Allow discrete values: True
                          Allow range values: False
    When I execute the report with the client of Crystal Reports 2008 (the developer tool), in the initial screen shows a list box where I can select the values from the left box and add it to the left box (as a usually filter). When the number of options (LOV) is more than  the maximum of the system, I have a input box bellow the list box, where I can insert any value (manually) and a button to insert it into the left box. When I publish the Report in the infoview, this filter is modified and the input box where I can introduce manually values is not showed and I can insert only the values showed in the list box, it causes that I can`t select a lot of values that is in the master data of SAP BW, because they arenu2019t listed in the list box.
    There is any option to ability this option in the infoview.
    2)     My Bex query, have a date filter with variable in the restricted key figures, when I execute a Crystal Reports, the infoview (and the Crystal Reports 2008 designer) ask me 2 times the same date, first only the date and second the date and the rest of parameters (introduced in the report of Crystal Reports).
    Why I need insert the date 2 times? How can I modify the Crystal Report for ask me only one time all the parameters?.
    Thanks.

    Hi Abhilash.
    Thank you for your information.
    1) Yes, the parameters are created in the Crystal Reports designer. I have created the parameters in the Crystal Report because I use the same Bex Query to create some Crystal Report, in other case, I will need create some Bex Query.
    2)The Bex query has the date filters and I have created some filters in Crystal Reports designer, the date filter from the Bex query is created automatically in the Crystal Report Designer but I don't use it, I haven't created it anytime. I use my filters only in the record selection. The date filters from the Bex query is showed as Static, and I can`t delete it, if I modify the parameter to dynamic or static with values, at first step ask me again static without values and the second step of the report execution ask me the parameter as I have defined in Crystal Reports Designer, my parameters fields are dynamic. A lot of reports have subreport, but I have created one of them without subreport (to trial) and the Crystal Reports ask me the date filters at first execution, and when I insert the date filters, in the second step, ask me the date filters again and my parameters fields again.
    Thank you again.

  • Status of data in Bex query shows wrong date

    Dear Experts,
    The Bex qurey after sucessful execution, show the Status of data as old date i.e. feb 2012. but we observed that the data uplaod happens regularly and sucessful.
    we tried executing the same query using RSRT/Bex Analyzer/Portal. the results are same i.e. showing incorrect status of data.
    Note: The Bex query is built on BI Infoset which sources from DSOs and Master Data infoobjects, and  BI version is 7.0.
    Kindly please help for resolving the issue.
    Best Regards,
    Mannu.

    Hi Vijay,
    The data upload has happend today also and it is sucessful, the reporing status is available for requests from respective infoproviders.
    'Status of data' is not a filed. if it an information to tell the status of data in query result.
    Please find the following steps to find the 'status of data'
    go to RSRT->give the query name and execute-> now after query results-> go to last page-> you can find the 'status of data'.
    Best Regards,
    Mannu

  • Message in BEx Query Designer Formula

    Hi Experts,
    I need to display message based on the value of the formula result. For Example:
    If K.F1 =<2.5 Then <Message: ODD>
    ElseIF K.F1 >2.5 Then <Message: Even>
    Else
    <Message: Determine the value>
    EndIF
    Thease above messages would be build in the formula column of BEx query designer
    Thanks and really appreciate your response.
    Regards,
    Waseem

    Hello,
    I have done the same funtionality with the help of workbook.
    May be experts can guide us how to display  messages in the formula column of BEx query designer.
    Thanks.
    With regards,
    Anand Kumar

  • Drilldown in BeX Query Designer

    Hello,
    I am new in SAP. I am having problem creating Drill down. I have this report where all the data is Transactional data. So I haven't created any Master Data. So I won't be able to use Navigational Attribute for Drill down purpose and I don't want to use Hierarchy. Is there any possibility of getting the Drill down in BeX Query Designer? Any help will be appreciated.
    Warm Regards,
    Debayan

    Hi Debayan,
    first of all, what is your requirement to create a drill down?
    A drill down in BEx query means showing additional information from report output. There are 3 ways to drill down a query in BEx
    1. Master data-Navigational Attributes
    2. Master data- Hierarchies
    3. Free characteristics
    As you dont have any master data in the report (which is very strange) you can use the additional characteristics provided in the 'Free characteristics' to see how the drill down works in BEx.
    Please share your exact requirement.
    Hope this helps.
    -Swati.

  • Division in bex query designer

    Hi experts,
    I have a strange problem in bex query designer. I am trying to calculate margin in % but the calculation gives the wrong result.
    The two figures I try to calculate are -25124 and -91248 (figures in 1000 NOK)
    The result should be (-25124/-91248)100 = 27,53* (when formula entered in excel)
    I have tried the following in Bex query designer
    -25124 %A -91248 = -0,02753%
    (-25124/-91248)*100 = 0,02753
    What might be the problem here?

    Thanks again for your answer,
    I will try to explain my report (requirement from the business user)
    Actual (KF)----
    Budget (KF)       
    Sales-- -91248--
    -77153         
    FSP-- -25124--
    -18918
    Margin  % -
    (FSP Actual/Sales Actual) 100---(FSP Budget/Sales Budget)100
    Dim
    Dim
    Result
    The margin is calculated in the cells in the bex query designer to differentiate between actual and budget. There is no option to calculate the margin in the columns as this would influence all other rows aswell.

Maybe you are looking for