Reg : data is not getting in the output
hi team,
data is not getting in the output, but it is getting in the debug mode
REPORT ZSAPP10 .
*tables : pernr.
TABLES : PA0001.
type-pools : slis.
types : begin of itab,
pernr type pernr,
orgeh type orgeh,
abkrs type abkrs,
end of itab,
begin of itab2,
pernr type pernr,
vorna type pad_vorna,
nachn type pad_nachn,
end of itab2.
parameter : p_pernr like pa0001-pernr.
*DATA: g_cprog tYPE SY-CPROG.
data : i_itab1 type table of itab initial size 0,
i_itab2 type table of itab2 initial size 0.
data : w_itab type itab,
w_itab2 type itab2.
data : t_fieldcat type slis_t_fieldcat_alv,
w_fieldcat type slis_fieldcat_alv.
data : t_event type slis_t_event,
w_event type slis_alv_event.
data : t_listheader type slis_t_listheader,
w_listheader type slis_listheader.
*get pernr.
w_event-form = 'TOP_OF_PAGE'.
w_event-form = 'sub1'.
append w_event to t_event.
w_listheader-typ = 'H'.
w_listheader-info = 'this is new top of page'.
append w_listheader to t_listheader.
select pernr
orgeh
abkrs from pa0001 into table i_itab1 where pernr = p_pernr.
w_fieldcat-col_pos = 1.
w_fieldcat-seltext_m = 'personnal no'.
w_fieldcat-fieldname = 'pernr'.
w_fieldcat-tabname = 'i_itab1'.
w_fieldcat-outputlen = '20'.
append w_fieldcat to t_fieldcat.
w_fieldcat-col_pos = 2.
w_fieldcat-seltext_m = 'org. unit'.
w_fieldcat-tabname = 'i_itab1'.
w_fieldcat-fieldname = 'orgeh'.
w_fieldcat-outputlen = '20'.
append w_fieldcat to t_fieldcat.
w_fieldcat-col_pos = 3.
w_fieldcat-seltext_m = 'payroll area'.
w_fieldcat-tabname = 'i_itab1'.
w_fieldcat-fieldname = 'abkrs'.
w_fieldcat-outputlen = '20'.
append w_fieldcat to t_fieldcat.
*g_cprog = SY-CPROG.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
I_INTERFACE_CHECK = ' '
I_BYPASSING_BUFFER =
I_BUFFER_ACTIVE = ' '
I_CALLBACK_PROGRAM = SY-CPROG
I_CALLBACK_PF_STATUS_SET = ' '
I_CALLBACK_USER_COMMAND = ' '
I_CALLBACK_TOP_OF_PAGE = ' '
I_CALLBACK_HTML_TOP_OF_PAGE = ' '
I_CALLBACK_HTML_END_OF_LIST = ' '
I_STRUCTURE_NAME =
I_BACKGROUND_ID = ' '
I_GRID_TITLE =
I_GRID_SETTINGS =
IS_LAYOUT =
IT_FIELDCAT = T_FIELDCAT
IT_EXCLUDING =
IT_SPECIAL_GROUPS =
IT_SORT =
IT_FILTER =
IS_SEL_HIDE =
I_DEFAULT = 'X'
I_SAVE = ' '
IS_VARIANT =
IT_EVENTS = T_EVENT
IT_EVENT_EXIT =
IS_PRINT =
IS_REPREP_ID =
I_SCREEN_START_COLUMN = 0
I_SCREEN_START_LINE = 0
I_SCREEN_END_COLUMN = 0
I_SCREEN_END_LINE = 0
IT_ALV_GRAPHICS =
IT_ADD_FIELDCAT =
IT_HYPERLINK =
I_HTML_HEIGHT_TOP =
I_HTML_HEIGHT_END =
IT_EXCEPT_QINFO =
IMPORTING
E_EXIT_CAUSED_BY_CALLER =
ES_EXIT_CAUSED_BY_USER =
TABLES
T_OUTTAB = I_ITAB1[]
EXCEPTIONS
PROGRAM_ERROR = 1
OTHERS = 2
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
FORM sub1 *
FORM sub1.
CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
EXPORTING
IT_LIST_COMMENTARY = t_listheader
I_LOGO =
I_END_OF_LIST_GRID =
ENDFORM. " sub1
write this way...
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
i_callback_program = w_repid
is_layout = wa_layout
i_callback_user_command = 'USER_COMMAND_ACCT'
i_grid_title = 'Document Status Report'
it_fieldcat = it_fcat[]
IT_SORT = IT_SORT[]
it_events = it_events
TABLES
t_outtab = it_final_data[]
EXCEPTIONS
program_error = 1
OTHERS = 2.
Similar Messages
-
Data is not getting displayed in the report from an Infoset.
Hi All,
I am having a report based on an infoset. This report is displaying the data in the Dev. envmt. When it is transported to the QA, it is not displaying the data in the BEx as well as RSRT, in the QA envmt. The patch levels of both the Dev. and QA are the same. The Queries are same in the Dev and QA also.
While trying to display the data from the infoset (rt.click- display data), i am able to view the data, in the QA.
Could anyone please suggest why the data is not getting displayed in the query designer.
Thanks & Regards,
A.V.N.RaoHi Ashish,
I ran the "ZPS/!ZPS" in RSRT where ZPS is the infoset name. In Dev, it displayed the values. In QA, it displayed the below messages:
ECharacteristic 0TCAKYFNM does not exist. Check authorizations
WThere are calculated elements. These results are bracketed [ ]
and below that, it displayed the values for Number of records. But, it has not displayed the values for the other figures.
Does this has any impact in QA.
Thanks & Regards,
AVN Rao. -
Data is not getting replicating to the destination db.
I has set up streams replication on 2 databases running Oracle 10.1.0.2 on windows.
Steps for setting up one-way replication between two ORACLE databases using streams at schema level followed by the metalink doc
I entered a few few records in the source db, and the data is not getting replication to the destination db. Could you please guide me as to how do i analyse this problem to reach to the solution
setps for configuration _ steps followed by metalink doc.
==================
Set up ARCHIVELOG mode.
Set up the Streams administrator.
Set initialization parameters.
Create a database link.
Set up source and destination queues.
Set up supplemental logging at the source database.
Configure the capture process at the source database.
Configure the propagation process.
Create the destination table.
Grant object privileges.
Set the instantiation system change number (SCN).
Configure the apply process at the destination database.
Start the capture and apply processes.
Section 2 : Create user and grant privileges on both Source and Target
2.1 Create Streams Administrator :
connect SYS/password as SYSDBA
create user STRMADMIN identified by STRMADMIN;
2.2 Grant the necessary privileges to the Streams Administrator :
GRANT CONNECT, RESOURCE, AQ_ADMINISTRATOR_ROLE,DBA to STRMADMIN;
In 10g :
GRANT CONNECT, RESOURCE, AQ_ADMINISTRATOR_ROLE,DBA to STRMADMIN;
execute DBMS_STREAMS_AUTH.GRANT_ADMIN_PRIVILEGE('STRMADMIN');
2.3 Create streams queue :
connect STRMADMIN/STRMADMIN
BEGIN
DBMS_STREAMS_ADM.SET_UP_QUEUE(
queue_table => 'STREAMS_QUEUE_TABLE',
queue_name => 'STREAMS_QUEUE',
queue_user => 'STRMADMIN');
END;
Section 3 : Steps to be carried out at the Destination Database PLUTO
3.1 Add apply rules for the Schema at the destination database :
BEGIN
DBMS_STREAMS_ADM.ADD_SCHEMA_RULES(
schema_name => 'SCOTT',
streams_type => 'APPLY ',
streams_name => 'STRMADMIN_APPLY',
queue_name => 'STRMADMIN.STREAMS_QUEUE',
include_dml => true,
include_ddl => true,
source_database => 'REP2');
END;
3.2 Specify an 'APPLY USER' at the destination database:
This is the user who would apply all DML statements and DDL statements.
The user specified in the APPLY_USER parameter must have the necessary
privileges to perform DML and DDL changes on the apply objects.
BEGIN
DBMS_APPLY_ADM.ALTER_APPLY(
apply_name => 'STRMADMIN_APPLY',
apply_user => 'SCOTT');
END;
3.3 Start the Apply process :
DECLARE
v_started number;
BEGIN
SELECT decode(status, 'ENABLED', 1, 0) INTO v_started
FROM DBA_APPLY WHERE APPLY_NAME = 'STRMADMIN_APPLY';
if (v_started = 0) then
DBMS_APPLY_ADM.START_APPLY(apply_name => 'STRMADMIN_APPLY');
end if;
END;
Section 4 :Steps to be carried out at the Source Database REP2
4.1 Move LogMiner tables from SYSTEM tablespace:
By default, all LogMiner tables are created in the SYSTEM tablespace.
It is a good practice to create an alternate tablespace for the LogMiner
tables.
CREATE TABLESPACE LOGMNRTS DATAFILE 'logmnrts.dbf' SIZE 25M AUTOEXTEND ON
MAXSIZE UNLIMITED;
BEGIN
DBMS_LOGMNR_D.SET_TABLESPACE('LOGMNRTS');
END;
4.2 Turn on supplemental logging for DEPT and EMPLOYEES table :
connect SYS/password as SYSDBA
ALTER TABLE scott.dept ADD SUPPLEMENTAL LOG GROUP dept_pk(deptno) ALWAYS;
ALTER TABLE scott.EMPLOYEES ADD SUPPLEMENTAL LOG GROUP dep_pk(empno) ALWAYS;
Note: If the number of tables are more the supplemental logging can be
set at database level .
4.3 Create a database link to the destination database :
connect STRMADMIN/STRMADMIN
CREATE DATABASE LINK PLUTO connect to
STRMADMIN identified by STRMADMIN using 'PLUTO';
Test the database link to be working properly by querying against the
destination database.
Eg : select * from global_name@PLUTO;
4.4 Add capture rules for the schema SCOTT at the source database:
BEGIN
DBMS_STREAMS_ADM.ADD_SCHEMA_RULES(
schema_name => 'SCOTT',
streams_type => 'CAPTURE',
streams_name => 'STREAM_CAPTURE',
queue_name => 'STRMADMIN.STREAMS_QUEUE',
include_dml => true,
include_ddl => true,
source_database => 'REP2');
END;
4.5 Add propagation rules for the schema SCOTT at the source database.
This step will also create a propagation job to the destination database.
BEGIN
DBMS_STREAMS_ADM.ADD_SCHEMA_PROPAGATION_RULES(
schema_name => 'SCOTT',
streams_name => 'STREAM_PROPAGATE',
source_queue_name => 'STRMADMIN.STREAMS_QUEUE',
destination_queue_name => 'STRMADMIN.STREAMS_QUEUE@PLUTO',
include_dml => true,
include_ddl => true,
source_database => 'REP2');
END;
Section 5 : Export, import and instantiation of tables from
Source to Destination Database
5.1 If the objects are not present in the destination database, perform
an export of the objects from the source database and import them
into the destination database
Export from the Source Database:
Specify the OBJECT_CONSISTENT=Y clause on the export command.
By doing this, an export is performed that is consistent for each
individual object at a particular system change number (SCN).
exp USERID=SYSTEM/manager@rep2 OWNER=SCOTT FILE=scott.dmp
LOG=exportTables.log OBJECT_CONSISTENT=Y STATISTICS = NONE
Import into the Destination Database:
Specify STREAMS_INSTANTIATION=Y clause in the import command.
By doing this, the streams metadata is updated with the appropriate
information in the destination database corresponding to the SCN that
is recorded in the export file.
imp USERID=SYSTEM@pluto FULL=Y CONSTRAINTS=Y FILE=scott.dmp IGNORE=Y
COMMIT=Y LOG=importTables.log STREAMS_INSTANTIATION=Y
5.2 If the objects are already present in the desination database, there
are two ways of instanitating the objects at the destination site.
1. By means of Metadata-only export/import :
Specify ROWS=N during Export
Specify IGNORE=Y during Import along with above import parameters.
2. By Manaually instantiating the objects
Get the Instantiation SCN at the source database:
connect STRMADMIN/STRMADMIN@source
set serveroutput on
DECLARE
iscn NUMBER; -- Variable to hold instantiation SCN value
BEGIN
iscn := DBMS_FLASHBACK.GET_SYSTEM_CHANGE_NUMBER();
DBMS_OUTPUT.PUT_LINE ('Instantiation SCN is: ' || iscn);
END;
Instantiate the objects at the destination database with
this SCN value. The SET_TABLE_INSTANTIATION_SCN procedure
controls which LCRs for a table are to be applied by the
apply process. If the commit SCN of an LCR from the source
database is less than or equal to this instantiation SCN,
then the apply process discards the LCR. Else, the apply
process applies the LCR.
connect STRMADMIN/STRMADMIN@destination
BEGIN
DBMS_APPLY_ADM.SET_SCHEMA_INSTANTIATION_SCN(
SOURCE_SCHEMA_NAME => 'SCOTT',
source_database_name => 'REP2',
instantiation_scn => &iscn );
END;
Enter value for iscn:
<Provide the value of SCN that you got from the source database>
Note:In 9i, you must instantiate each table individually.
In 10g recursive=true parameter of DBMS_APPLY_ADM.SET_SCHEMA_INSTANTIATION_SCN
is used for instantiation...
Section 6 : Start the Capture process
begin
DBMS_CAPTURE_ADM.START_CAPTURE(capture_name => 'STREAM_CAPTURE');
end;
/same problem, data not replicated.
its captured,propagated from source,but not applied.
also no apply errors in DBA_APPLY_ERROR. Looks like the problem is that LCRs propagated from source db do not reach target queue.can i get any help on this?
queried results are as under:
1.at source(capture process)
Capture Session Total
Process Session Serial Redo Entries LCRs
Number ID Number State Scanned Enqueued
CP01 16 7 CAPTURING CHANGES 1010143 72
2. data propagated from source
Total Time Executing
in Seconds Total Events Propagated Total Bytes Propagated
7 13 6731
3. Apply at target(nothing is applied)
Coordinator Session Total Total Total
Process Session Serial Trans Trans Apply
Name ID Number State Received Applied Errors
A001 154 33 APPLYING 0 0 0
4. At target:(nothing in buffer)
Total Captured LCRs
Queue Owner Queue Name LCRs in Memory Spilled LCRs in Buffered Queue
STRMADMIN STREAMS_QUEUE 0 0 0 -
Data is not getting loaded in the Cube
Hi Experts,
I had a cube to which I created aggregates and then I deleted the data of the cube and made some changes in it and trying to load the data again from PSA.
But I'm the data is not getting loaded in to it the cube.
Can anyone tell me do I have to delete the aggregates before I start a fresh data in to my cube. If yes can you tell me how do i delete it and load it again.
If it is something else please help me resolve my issue.
ThanksHi,
Deactivate the aggregates and then load the data from PSA to Cube.
And then reactivate the aggregates. While reactivating them you can ask to fill them also.
Regards,
Anil Kumar Sharma. P -
Hi I newly started using Iphone 6, I am not getting all the applications list under Use Cellular date for to restrict my unwanted apps on cellular data
Please help me outHi Rajesh778484,
Welcome to the Apple Support Communities!
I understand that some of your applications are not appearing under Settings > Cellular on your iPhone so that you can restrict or allow use of cellular data. If you have some installed applications on your iPhone that are not showing here, the first troubleshooting step I would suggest would be to reset your iPhone. Please refer to the attached article for information on how to perform a reset.
Restart or reset your iPhone, iPad, or iPod touch - Apple Support
Best regards,
Joe -
I have developed a batch harness whereby all scheduled tasks (W2012) invoke a common powershell script that acts as a wrapper to all our housekeeping jobs.
The first step in the wrapper is to create a Transcript file using following code
if ($Host.name -ne "Windows PowerShell ISE Host") # Transcript does not work within ISE
$timestamp = (get-date -format "yyyy-MM-dd-HH-mm-ss.fff")
$path = "c:\corp\$timestamp" + "_$pid.txt"
Start-Transcript -path $path -append
As expected the folder contains files with timestamp & pid in name
08/08/2013 11:00 AM 14,388 2013-08-08-11-00-01.158_1620.txt
08/08/2013 11:00 AM 12,506 2013-08-08-11-00-01.485_936.txt
08/08/2013 11:00 AM 12,994 2013-08-08-11-00-01.735_9328.txt
08/08/2013 11:00 AM 12,024 2013-08-08-11-00-01.766_8624.txt
08/08/2013 11:00 AM 13,902 2013-08-08-11-00-01.860_1756.txt
08/08/2013 11:01 AM 15,142 2013-08-08-11-01-31.392_10120.txt
08/08/2013 05:00 AM 14,982 _1692.txt
However note the last file, it has a zero length date time value in the name
The error recorded by PowerShell is
get-date : The term 'get-date' is not recognized as the name of a cmdlet, function, script file, or operable program.
Check the spelling of the name, or if a path was included, verify that the path is correct and try again.
At C:\Corp\Powershell\DMPRun-ScheduledTask.ps1:171 char:18
+ $timestamp = (get-date -format "yyyy-MM-dd-HH-mm-ss.fff")
+ ~~~~~~~~
+ CategoryInfo : ObjectNotFound: (get-date:String) [], CommandNotFoundException
+ FullyQualifiedErrorId : CommandNotFoundException
IE get-date has failed and returned a zero length field as the timestamp
Can anyone think of a good reason why get-date would fail intermittently?
Do I have to code defensively for base Powershell functions?I implemented David's suggestion and now I intermittently get
import-module : Access to the path 'PowerShell_CommandAnalysis_Lock' is denied.
At D:\temp\loop_jc2_2013_11_25_08_55_02.ps1:15 char:1
+ import-module Microsoft.Powershell.Utility
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ CategoryInfo : NotSpecified: (:) [Import-Module], UnauthorizedA
ccessException
+ FullyQualifiedErrorId : System.UnauthorizedAccessException,Microsoft.Pow
erShell.Commands.ImportModuleCommand
I added a trap chain (My Powershell skills do not yet include recursive trap coding, any suggestions welcome)
trap {
trap {
"Trap1"
"Exception: " + $_
"Error: " + $Error[0]
"Message: " + $_.Exception.Message
"InnerException: " + $_.Exception.InnerException
"StackTrace: " + $_.Exception.StackTrace
"FailedItem: " + $_.Exception.ItemName
import-module Microsoft.Powershell.Management
import-module Microsoft.Powershell.Security
import-module Microsoft.Powershell.Utility
"Trap2"
"Exception: " + $_
"Error: " + $Error[0]
"Message: " + $_.Exception.Message
"InnerException: " + $_.Exception.InnerException
"StackTrace: " + $_.Exception.StackTrace
"FailedItem: " + $_.Exception.ItemName
import-module Microsoft.Powershell.Management
import-module Microsoft.Powershell.Security
import-module Microsoft.Powershell.Utility
import-module Microsoft.Powershell.Management
import-module Microsoft.Powershell.Security
import-module Microsoft.Powershell.Utility
trap {
"Trap3"
"Exception: " + $_
"Error: " + $Error[0]
"Message: " + $_.Exception.Message
"InnerException: " + $_.Exception.InnerException
"StackTrace: " + $_.Exception.StackTrace
"FailedItem: " + $_.Exception.ItemName
exit 1
get-date
Now I intermittently get ..
Trap2
Exception: Access to the path 'PowerShell_CommandAnalysis_Lock' is denied.
Error: Access to the path 'PowerShell_CommandAnalysis_Lock' is denied.
Message: Access to the path 'PowerShell_CommandAnalysis_Lock' is denied.
InnerException:
StackTrace: at System.IO.__Error.WinIOError(Int32 errorCode, String maybeFullPath)
at System.Threading.Mutex.MutexTryCodeHelper.MutexTryCode(Object userData)
at System.Runtime.CompilerServices.RuntimeHelpers.ExecuteCodeWithGuaranteedCleanup(TryCode code, CleanupCode backoutCode, Object userData)
at System.Threading.Mutex.CreateMutexWithGuaranteedCleanup(Boolean initiallyOwned, String name, Boolean& createdNew, SECURITY_ATTRIBUTES secAttrs)
at System.Threading.Mutex..ctor(Boolean initiallyOwned, String name, Boolean& createdNew, MutexSecurity mutexSecurity)
at System.Threading.Mutex..ctor(Boolean initiallyOwned, String name, Boolean& createdNew)
at System.Management.Automation.AnalysisCache.CacheExportedCommands(PSModuleInfo module, Boolean force, ExecutionContext context)
at Microsoft.PowerShell.Commands.ModuleCmdletBase.LoadUsingModulePath(PSModuleInfo parentModule, Boolean found, IEnumerable`1 modulePath, String name, SessionState ss, ImportModuleOptions options, ManifestProcessingFlags manifestProcessingFlags,
PSModuleInfo& module)
at Microsoft.PowerShell.Commands.ImportModuleCommand.ImportModule_LocallyViaName(ImportModuleOptions importModuleOptions, String name)
at Microsoft.PowerShell.Commands.ImportModuleCommand.ProcessRecord()
at System.Management.Automation.CommandProcessor.ProcessRecord()
FailedItem:
import-module : Access to the path 'PowerShell_CommandAnalysis_Lock' is denied.
At D:\temp\loop_jc2_2013_11_25_09_19_52.ps1:26 char:1
+ import-module Microsoft.Powershell.Security
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ CategoryInfo : NotSpecified: (:) [Import-Module], UnauthorizedA
ccessException
+ FullyQualifiedErrorId : System.UnauthorizedAccessException,Microsoft.Pow
erShell.Commands.ImportModuleCommand -
My carrier is Straight Talk (using ATT network) and they require the user to enter the APN settings in order to access their data network. My Iphone 4s is factory unlocked but I can not get to the Cellular Data Network tab to enter the settings?
Yes ATT hides the APN settings so when you try to use a st sim it automatically reads on AT&T network so the APN settings are hidden and cannot be accessed however you can go to apn.straighttalk.com on you'r phone and select APN/data settings then select AT&T then iPhone and a screen will pop up asking if you would like to install the profile for whatever reason it's not verified but works fine. You can also go to www.unlockit.co.nz and set up a straight talk APN profile that is verified not sure exactly what that means but both work to get the data working on the phone for straight talk but it does not make the MMS work. There are a couple other methods I have read about one is on howardforums using ibackupbot to manually change the files on the phone I haven't been able to get mine to stick using that method but other people have and there is a sim swap method to trick the phone to reveal APN settings using a tmobile sim I have not tried this but other people have with success. The last two methods mentioned will make both data and MMS work
-
Data is not updated in the database
hi.. to all..
i'm using the following code ...... but the data is not updated in the database.. the output window get closed as soon as i clicked save button...
i don't know wat's problem with the program...
Plz help me.. to get resolve this problem..
import java.applet.*;
import java.awt.*;
import java.sql.*;
import java.awt.event.*;
import sun.jdbc.odbc.*;
public class Customerdetails extends Frame implements ActionListener
TextField ccod,cname,add,phno,conp,email,fax;
Label l1,l2,l3,l4,l5,l6,l7;
Button save,exit;
Connection con;
ResultSet rs;
Statement stmt;
String s1,s2,s3,s4,s5,s6,s7;
public Customerdetails()
super("CustomerDetails");
setSize(700,750);
setLayout(null);
setBackground(new java.awt.Color(245, 117, 105));
l1=new Label("Customercode");
l2=new Label("CompanyName");
l3=new Label("Address");
l4=new Label("PhoneNumber");
l5=new Label("Contact person");
l6=new Label("EmailAddress");
l7=new Label("FaxNumber");
l1.setBounds(20,100,100,70);
l2.setBounds(20,180,100,70);
l3.setBounds(20,270,100,70);
l4.setBounds(20,340,100,70);
l5.setBounds(20,420,100,70);
l6.setBounds(20,500,100,70);
l7.setBounds(20,580,100,70);
ccod=new TextField();
cname=new TextField();
add=new TextField();
phno=new TextField();
conp=new TextField();
email=new TextField();
fax=new TextField();
ccod.setBounds(200,120,150,50);
cname.setBounds(200,200,150,50);
add.setBounds(200,280,150,50);
phno.setBounds(200,360,150,50);
conp.setBounds(200,440,150,50);
email.setBounds(200,520,150,50);
fax.setBounds(200,600,150,50);
Button save= new Button("Save");
Button exit= new Button("Exit");
save.setBounds(200,680,100,40);
exit.setBounds(350,680,100,40);
add(l1);
add(ccod);
add(l2);
add(cname);
add(l3);
add(add);
add(l4);
add(phno);
add(l5);
add(conp);
add(l6);
add(email);
add(l7);
add(fax);
add(save);
add(exit);
save.addActionListener(this);
exit.addActionListener(this);
setVisible(true);
addWindowListener(new WindowAdapter(){
public void WindowClosing(WindowEvent w) {System.exit(0);}});
public void actionPerformed(ActionEvent ae)
Customerdetails cud= new Customerdetails();
if(ae.getSource()==save)
s1=ccod.getText();
s2=cname.getText();
s3=add.getText();
s4=phno.getText();
s5=conp.getText();
s6=email.getText();
s7=fax.getText();
try
String query = "insert into Customerdetails (Customercode,CompanyName,Address,PhoneNumber,Contact person,EmailAddress,FaxNumber)"+ "values('"+s1+"','"+s2+"','"+s3+"','"+s4+"','"+s5+"','"+s6+"','"+s7+"')";
Class.forName("sun.jdbc.odbc.JdbcOdbcDriver");
con=DriverManager.getConnection("jdbc:odbc:prism");
stmt=con.createStatement();
rs=stmt.executeQuery(query);
stmt.close();
catch(ClassNotFoundException e)
System.out.println(e);
catch(SQLException e)
System.out.println(e);
else if(ae.getSource()==exit)
System.exit(0);
else
System.exit(0);
public static void main(String args[])
Customerdetails cud= new Customerdetails();
}This doesn't look right:
,FaxNumber)"+ "values(because it's equal to ,FaxNumber)values(and your SQL server won't understand it, put a whitespace between.
/M -
Data is not getting updated in table using RFC
Hi Experts,
In my scenario, I am calling one RFC using RFC receiver channel. After running scenario, channel is showing status that RFC executed successfully. But when I am checking tables in R/3 system, data is not getting updated.
Moreover , when we tried to execute the RFC manually in R/3 system, that time data uploaded into table successfully.
Could anybody tell me what would the reason that data not uploading into table when we send it through XI.
Regards,
SariHI Sari,
as you have scenario with RFC receiver.. and as you mentioned that it not updating tables when run through PI but when you execute RFC manually tables got updates.. then following are the options you can check..
-- if you check RFC communication channel and if everything ok on then.. this means that your RFC is getting triggered successfully..but as you said tables are not updated.. for this you can go to SXMB_MONI and check the log take payload after mapping.. and compare it with the input when you try to execute it manually.. I think the input when you try manually and input to RFC when you try through PI is different and that is causing the Problem.. you will be able to see the difference in input then check.. I think the problem is data and not RFC communication channel..so by using this you will come to know difference
-- else if possible configure your ID in PI in RFC Receiver and then check and put breakpoint on ABAP side.. so that when PI will hit RFC you will get it in debug mode and able to see what is going wrong..
Thanks,
Bhupesh -
Data is not Getting refresh in Dashboard
Hi I have implemented Xcelsius on the top of SAP BI System.
I have the following architecture -
SAP BI Cube --> BO XI 3.1 Universe Based on Cube --> QWaaS on the Universe --> Xcelsius Dashboard on the QWaas.
When i created a dashboard and run it , it worked fine and showed me data , which is lying in Cube.
But When the Data get updated in Cube and i again refresh the Dashboard , It still showing me the old data , the Data is not getting refresh in Dashboard .
what could be the possible casue ?
Is QWaas always fetch the dat at run time ?
ThanksQaaWS web service call needs to be invoked to get the data updates from the datasource. Xcelsius provides several options to command how frequently web services connections are calle/refreshed ('refresh on load', 'refresh every X seconds' or trigger cells...).
You should also keep in mind, that, since QaaWS hits datasource each time web service is called, this can bring some performance issues (web service calls WebI server to run corresponding query, which performs a refresh). In order to mitigate this, since XI 3.0, QaaWS features a cache mechanism, that is used to store data results from each query refresh (corresponding to a web service call), in order to serve it again with better efficiency, in case same request is performed during a specific time interval (which typically corresponds to dashboard interactions).
Cache sessions are sorted according to the user names and prompt values used, cache is emptied after a defauilt duration without any interaction (request from the same session).
Cache timeout duration is set for each QaaWS query, and can be tuned from QaaWS Designer when modifying/creating the query : go to Advanced... button on first step of query edition wizard, cache lifetime corresponds to timeout value (in seconds) displayed on Advanced parameter panel (default value being set to 60 seconds).
Cache lifetime may also be an explanation why you do not see data refreshed (if you are with QaaWS XI 3.0 or later).
Hope that helps,
David. -
Data is not getting posted to R/3 from CRM
Hi to All,
When i am creating sales order in CRM data is not getting replicated to R/3. System is showing that B Doc is created , posted and validated. But here in CRM system outbound queue is generated but in R/3 there is no data in inbound queue.
Can anybody tell me the reason behind this?
Regards,
AnuragHi,
Could you please check the if the Site-R/3 in SMOEAC has the subscription All Business Transactions (MESG)? If not please create a subscription to the R/3 site.
If this doesn't work please update the post.
Hope this helps.
Thanks,
Karuna. -
Data is not getting updated in DB table
hi all
i am doing IDOC to jdbc scenario
i am triggering idoc from R/3 and the data is going into DB table
sender side: ZVendorIdoc
receiver side:
DT_testVendor
Table
tblVendor
action UPDATE_INSERT
access 1:unbounded
cVendorName 1
cVendorCode 1
fromdate 1
todate 1
Key
cVendorName 1
if i trigger idoc for example vendor 2005,2006 and 2010 data is getting updated in the table
but again if i trigger idoc for same vendor nos data does not get updated in DB table while message is successfull in moni and RWB both
plz suggest if any change need to be done to update the data
Regards
sandeep sharmaHi Ravi
you are right, vendor no is my key field . problem is when i send data again then it should Update the data but it's not updating the data again
i did on exp with this : i deleted all the record from the table and then triggered idoc for vendor 2005 , 2006,2010 after this data is updated in the table i deleted the rows for vendor no 2006 and 2010 and kept the row for vendor 2005
then i again trigered the idoc for vendor no 2005,2006 and 2010 now this should update and it should insert rows for vendor no 2006 and 2010 but i am surprised its not updating the data
Thanks
sandeep -
Data is not getting posted in ABAP Proxy.
Hi,
I am working on File to ABAPProxy scenario. The data is not going to proxy.
In PI sxmb_moni is status is successfull and in the R3 sxmb_moni the status is successfull. But the data is not getting posted in the tables(ABAPProxy). I had checked the inbound and oubound queues. And with the same input data, abapers cheked their code in Abapproxy, then the table is getting updated. When we trigger from PI, the tables are not getting updated.Please help me.
Thanks,
Pragathi.Hi,
The problem may be
Case 1: Cache is not getting refreshed(Check SXI_CACHE)
Case 2: The Queue Is blocked (Check SMQ1 & SMQ2)
Regards,
Sainath -
Table PA0045 is getting updated but data is not getting displayed in Infty
Hi,
When i save entries for any employee in Infty 0045 , the table pa0045 is getting updated with the record.
But FOR FEW USERS, who created the record, the data is not getting displayed in one tab of the tabstrip bur rest tabs are filled with data. Its the case with few users only .
Regards,
JyotiCheck if there is proper data to be shown in the tabstrip.
EX.. Loan Amount Granted in the Tabstrip Basicdata ... -
Data is not uploaded from the dso to the cube
Dear Experts,
In one of my process chains the data is not uploaded from the dso to the cube .
I have tried to upload the data month wise also but still after certain data records the data gets stuck up.
I have recreated the indexes also.
When I am checking in DB02 the table space is shown as 18491 MB.The used space is 97%.
Please suggest.Hi.....
I didn't get your point........what have you mention that you have recreated the index before loading....
Basically.the process should be........Delete index --> Load --> Create index......
You have mentioned that 97% of the memory space is in use........please check with the basis team once......
Also, in SM37 check if any such job is there which is running for a long time but not progressing......or which you think you don't need......then kill that job......
Regards,
Debjani.....
Maybe you are looking for
-
I keep getting a "connection was reset error" before step 1 can finish.
I signed up for iTunes match today but everytime I try to match my library it gets to the very end of step 1 and I get this error message "We could not complete your iTunes store request. The network connection was reset. Make sure your network conne
-
I have an Ipod classic.. Can I sync it to multiple computers?
I have an Ipod classic. All my music is on my desk top computer and I am now looking to buy a lap top can I add music to my ipod from my lap top without losing what I already have on it? Thank You
-
Exporting Grapher documents into Pages
I've tried to insert a Grapher document into a Pages '09 document; the image was awful! No matter what format I used (TIFF, PDF, JPEG) to export the Grapher file, the image in Pages '09 was unusable. The manual by Yves Barois is excellent for learn
-
Hyperion IR 9.3 workspace scheduling problem
Hi All, I am facing a strange issue with the scheduling of the Hyperion IR Report. I am trying to schedule a report on workspace but the job is failing after the execution of queries. Scenario is - The report is not having any process code of query.
-
SAP Landscape for ECC,EP,BW,XI, DMS and TREX
Hi all, I am in the role of SAP Basis Consultant for an IT organisation. One of their client require to install SAP ECC ( FI-CO,MM,PS,HR,REM,PM), EP, BW, XI, DMS and TREX. Their plan is to use ECC 6.0 ( Netweaver 7.0 SR2) with EP 7.0 and all others a