Reg.exe FLAGS command not working in 32bit environments

I am trying to run the command REG FLAGS "hklm\Software\SomeKey" SET DONT_VIRTUALIZE and each time I run it on a 32bit version of windows 7 in our environment I get the help screen. Even if I put in a bad path instead of getting a message
that the path was wrong I get the help screen. When I run it on my computer (Windows 7 64bit) it works as expected.
It does the same thing when I try REG FLAGS "hklm\Software\SomeKey" QUERY. Its like the 32 bit version doesn't know what FLAGS is although it is present in the help screen.
Ideas? Suggestions? Recipie ideas?

Hi Beast of Burden,
I have tested the reg flags in my Windows 7 32 bit Enterprise and it can run well .
Please note that the REG FLAGS can only be appiled to the "HKLM\Software"[\SubKey].Have you verified that the subkey existed in the 32 bit machine ?We can try the other subkey to have a check for example the "classes" subkey.
Best regards
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]
I understand about the HKLM\Software restriction and I have limited my testing to that key (and sub keys). As I said, when I enter a valid key it does nothing but show me the syntax screen. Generally while I am testing I am using the REG FLAGS <key>
QUERY command.
When I am on a machine where the command is working correctly, I will either see the flags for the eky specified or a message saying that the key was invalid (should I intensionally try a bad key). On machines where it is
not working I always see the syntax screen regardless if the key existed or not.
I am wondering if there is a patch or registry key that controls this behaviour.

Similar Messages

Alt ctrl c shortcut command not working in photoshop cc, it is opening Internet explorer (IE)

In Photoshop CC 2014 Alt + Ctrl + C ( to open for canvas size dialog box ) command not working, it is opening Internet Explorer (IE)

What version of windows are you using?
See if the Internet Explorer shortcut has that keyboard shortcut assigned to it.

Bash commands not working after upgrade to Lion

After upgrade, many BASH commands not working. For example, such a fundamental thing as "ls".
iMac20:bin a$ ls
Launch of "ls" failed: the PowerPC architecture is no longer supported.
What does it have to do with PowerPC? My computer is 2.66 GHz Inter Core Duo

Linc,
iMac20:~ a$ which ls
/sw/bin/ls
Also, I managed to look (using tcsh's ls-F command) into the contents of /usr/. Here's what I see there:
[iMac20:/bin] a% ls-F
[*          csh*        echo*       ksh*        mkdir*      rcp*        stty*       wait4path*
bash*       date*       ed*         launchctl* mv*         rm*         sync*       zsh*
cat*        dd*         expr*       link*       pax*        rmdir*      tcsh*
chmod*      df*         hostname*   ln*         ps*         sh*         test*
cp*         domainname* kill*       ls*         pwd*        sleep*      unlink*

Why is my BDC_CURSOR command not working to position the cursor?

Why is my BDC_CURSOR command not working to position the cursor? Here are the details regarding my issue.
I am writing a BDC to mass delete routing material assignments using transaction CA02. I am OK to navigate through the initial screen to go to the Header screen and from here I am OK to navigate to the Material Assignments screen. But once here, I cannot get the BDC_CURSOR command to take me into the list. Here are the commands I am using. Please let me know what I may try differently.
CA02 Material Assignment - Set position <-- this resets list of materials to correct position
PERFORM bdc_dynpro      USING 'SAPLCZDI'   '1010'.
PERFORM bdc_field       USING 'BDC_CURSOR' 'RC27X-ENTRY_ACT'.
PERFORM bdc_field       USING 'BDC_OKCODE'   '=ENT1'.
PERFORM bdc_field       USING 'RC27X-ENTRY_ACT' c_position.
CA02 Material Assignment - Delete
PERFORM bdc_dynpro      USING 'SAPLCZDI'   '1010'.
PERFORM bdc_field       USING 'BDC_CURSOR' 'MAPL-MATNR(01)'.    <-- this is not working to set the cursor into the list
PERFORM bdc_field       USING 'BDC_OKCODE' '=LOE'.             " trash can
PERFORM bdc_field       USING 'RC27X-ENTRY_ACT' c_position.
CA02 Material Assignment - Green Check OK
PERFORM bdc_dynpro      USING 'SAPLCZDI'   '1010'.
PERFORM bdc_field       USING 'BDC_CURSOR' 'RC27X-ENTRY_ACT'.
PERFORM bdc_field       USING 'BDC_OKCODE'   '=BACK'.            " check mark
PERFORM bdc_field       USING 'RC27X-ENTRY_ACT' c_position.

Thank you for your reply.
I had used SM35 to record. However, I was not aware of the "create program" feature. I had commented out a section from my previous post which I have now added back (latest code below). But it still did not resolve the issue.
When I execute with dismode = 'N', I get back error message "No batch input data for screen SAPLCZDI 1010".
When I execute with dismode = 'E' (only show dynpros when error), it stops at the material selection screen without placing my cursor in the list. I can then MANUALLY click to set the cursor position in the list, MANUALLY click the trashcan, it then uses my BDC command to respond to the popup asking "Do you want to delete", still leaving me at the material selection screen. I can then MANUALLY click the green check (or enter), then it continues with the BDC to go back to the previous screen, and saves. But it still will not place my cursor in the material selection list (SAPLCZDI screen 1010).
Here is code used. It is the second section of code labeled "CA02 Material Assignment - Delete" that is not working.
CA02 Material Assignment - Set position
this code functions to position the desired material to first in screen list
PERFORM bdc_dynpro      USING 'SAPLCZDI' '1010'.
PERFORM bdc_field       USING 'BDC_CURSOR'
                                'RC27X-ENTRY_ACT'.
PERFORM bdc_field       USING 'BDC_OKCODE'
                                '=ENT1'.
PERFORM bdc_field       USING 'RC27X-ENTRY_ACT'
                                 c_position.
CA02 Material Assignment - Delete
PERFORM bdc_dynpro      USING 'SAPLCZDI' '1010'.
PERFORM bdc_field       USING 'BDC_CURSOR'
                                'MAPL-MATNR(01)'.
PERFORM bdc_field       USING 'BDC_OKCODE'
                                '=LOE'.             " trash can
PERFORM bdc_field       USING 'RC27X-ENTRY_ACT'
                                 c_position.
Acknowledge Pop-Up Screen
PERFORM bdc_dynpro      USING 'SAPLSPO1' '0100'.
PERFORM bdc_field       USING 'BDC_OKCODE'
                                '=YES'.
CA02 Material Assignment - Green Check OK
PERFORM bdc_dynpro      USING 'SAPLCZDI' '1010'.
PERFORM bdc_field       USING 'BDC_CURSOR'
                                'RC27X-ENTRY_ACT'.
PERFORM bdc_field       USING 'BDC_OKCODE'
                                '=BACK'.            " check mark
PERFORM bdc_field       USING 'RC27X-ENTRY_ACT'
                                 c_position.

Odi os command not working with agentservice agent.

dear all,
odi os command not working with agentservice agent but with local agent it work fine.. and user is administrator.
kindly solve it
Regards
Naseer

Hi,
you referred to oscommand, so are you executing a .bat fille? if yes, where exactly does the .bat file reside, local machine or on network share?
Also, follow these couple of documents, they may be helpful to you.
859215.1 and 424703.1
Regards
Srikanth

Crontab reboot command not working

Crontab reboot command not working
Greetings
I am new at this so excuse any ignorant mistakes I might be making.
I have a server (MM X.4.9) that I would like to restart every day in order to make sure no programmes are hanging etc. If a program is hanging is should force quit it. Using terminal I have entered the following command:
sudo nano /etc/crontab
Entered password
Than I entered using tab between each sequence:
15 13 1 1 * root reboot
This was a test run and it did not reboot.
Entering
cat /etc/crontab
I got:
# The periodic and atrun jobs have moved to launchd jobs
# See /System/Library/LaunchDaemons
# minute hour mday month wday who command
15 13 1 1 * root reboot
What have I done wrong?
Thanks

Hehe, there you are experimenting with a "reboot" cron command and you are surprised it quit so fast. You are not going to find a "graceful" solution to shutdown dialogs.
MSWord is a Java app, so it is especially important for the command to work that it doesn't get hung up on outer layers of the system. Especially stupid apps that use Java which is not well integrated. I believe Word has a 5 minute autosave, so you should be able to recover most of your document.
This reboot command should be running around 2AM, when the average webserver has minimum traffic. If you feel the need to reboot during busier times of the day, I'd suggest you look at what's causing your applications to crash.

Illustrator Short Commands Not Working

Hi Team,
My illustrator CS6 short commands have stopped working.
Any time I try to use any CMD + Key, illustrator will not react.
This has been on going for a few months, I have tried resetting preferences but nothing has changed.
If someone could please help.
Thanks,
Brandon

Hi Jacob,
I have tried resetting preferences and few other options.
Anytime I press the CMD key the option at the bottom just changes from selection to direct selection, if that helps.
Should I uninstall and reinstall illustrator?
I no longer have my access key.
Thanks,
Brandon
Date: Wed, 8 Jan 2014 15:39:58 -0800
From: [email protected]
To: [email protected]
Subject: Illustrator Short Commands Not Working
    Re: Illustrator Short Commands Not Working
    created by Jacob Bugge in Illustrator - View the full discussion
THS,
You may try the following (you have tried/done some of them already) and see whether it helps (the following is a general list of things you may try when the issue is not in a specific file; 3) and 4) are specifically aimed at possibly corrupt preferences):
1) Close down Illy and open again;
2) Restart the computer (you may do that up to 3 times);
3) Close down Illy and press CtrlAltShift/CmdOptionShift during startup (easy but irreversible);
4) Move the folder Other options (follow the link with that name) with Illy closed (more tedious but also more thorough and reversible);
5) Look through and try out the relevant among the Other options (follow the link with that name, Item 7) is a list of usual suspects among other applications that may disturb and confuse Illy, Item 15) applies to CC, CS6, and maybe CS5);
Even more seriously, you may:
6) Uninstall, run the Cleaner Tool (if you have CS3/CS4/CS5/CS6/CC), and reinstall.
http://www.adobe.com/support/contact/cscleanertool.html
     Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/5994475#5994475
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/5994475#5994475
     To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/5994475#5994475. In the Actions box on the right, click the Stop Email Notifications link.
           Start a new discussion in Illustrator at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

Why does default keyboard shortcut for show/hide baseline grid (opt+command+') not work?

Why does default keyboard shortcut for show/hide baseline grid (opt+command+') not work?

Here's where you need to change the settings: System Preferences > Keyboard > Keyboard Shortcuts:

VISA read in exe file is not working

Hi all,
I am having problems with VISA read in an exe file created.
I am trying to write to and read from a programmable power supply via RS232. The VI writes a command to the instrument to set the voltage level. It then writes another command, requesting the resulting current value. This value is then read by VISA read
The VI is working fine on the development PC, which has LabVIEW installed. The exe file is also working fine on this PC. However, when I try to run the exe file on another PC (I've tried several) everything seem to work except for the VISA read functions. The voltage level command is sent, as well as the On and OFF commands, but the current is not read back.
I guess there must be something I have missed in the installation. I am working in LabVIEW 8.5. I have created an installer and included
Runtime Engine 8.5.1
VISA runtime 4.5
Is there something else I should do? I am really running out of ideas here...
I hope someone has a clue about this!
Clara

Clara-
1. Have you verified that the COM port settings in Windows (check under device manager) are matching how you initialize them (Baud, bits, parity, and flow control) and that these match the power supply's settings?
2. Also, are you trapping an error message after the attempted Read command (this will make it a lot easier to diagnose).
3. Do you programmatically close the VISA session at the end of the program?
4. You can always post the code to see if the forum members will catch the porblem.
~js
2006 Ultimate LabVIEW G-eek.

Suddenly won't boot, start up commands not working... am I out of luck?

Funny, this is my first mac being a hardcore and longtime PC user as my "test" mac... everything works perfectly... of course until 12 days after my warranty is up...
This morning on waking up my mac to turn on some music in iTunes, i click on the iTunes window to bring it into focus. It suddenly closes and dissapears, on returning to the shortcut bar (the tray at the bottom for programs, i don't know what mac users call it) and click on iTunes ot relaunch it after its crash/dissapearance, the task tray then decides to suddenly dissapear/crash (don't know which, it's like a crash but best described as a vanishing act as it doesn't lag or churn before dying, just vanishes).
Possibly related to this issue, not long ago my iChat stopped working, whenever i launched it, it would stay open for a couple seconds and automatically closed. I could sit there all day clicking it, it would open, 2 seconds later, close. I gave up on that. I gave up on that a week ago.
Shortly after my iTunes dissapeared/crash and then after the program tray also dissapearing. my mac mini reboots. Except it's stuck on the screen with the mac apple in the middle of the screen with the moving (yes it's moving) pinwheel on the bottom center of the screen. I let it sit there for a long while... 15 minutes pass nothing happens.
I try rebooting... same thing happens.
I'm go on my PC (Which i'm now typing from) and start searching for solutions. apple support pages suggest I try safe mode with shift.
SAFE MODE: Won't work. I tried pushing both shift buttons on my keyboard at different times (before the start up tone, immediately after the beggining of the start up tone, and after the start up tone finishes) all that happens is, I get the same pinwheel/apple screen that is "loading" (according to the pinwheel) forever.
I went to forums, read up on other different commands like holding down "X" or option command P+R.... X does the same as the not-working safe mode... option command P+R continually reboots the computer.
And in the end I'm still at square one. thouroughly frustrated. wishing my mac mini was a PC (as i've never had a PC problem I can't fix) Ironic experience... PCs, break often, easily fixed, no support needed.... Macs: rarely break, when they do, support needed, but support from apple expires 12 days ago, not easily fixed... and now I think i'm screwed out of the 700$+ i payed for this POS and I've lost my whole iTunes library, all the CDs i've loaded onto it, and all the music and TV shows i've purchased from the apple music store. Good game, apple takes a bunch of money, refuses to support my product which is now dead (had a similar situation with an iPod I had bought for my girlfriend).
My only hope is... I know mac users have a happy helpful community and always band together to help fellow mac users, something the PC world doesn't as-cohsively have. So...
Help me Obi-Wan Kenobi... you guys are my last and only hope.
Thanks in advance.
-John

Hi, John. Welcome to the Discussions.
1. You wrote: "I get the same pinwheel/apple screen that is "loading" (according to the pinwheel) forever"The "pinwheel" is known as a "spinning gear progress indicator."
This, combined with the other issues you've reported, sounds like problems with the hard drive. I suggest you begin troubleshooting using the Procedure specified in my "Resolving Disk, Permission, and Cache Corruption" FAQ. Perform the steps therein in the order specified.
2. You wrote: "...the shortcut bar (the tray at the bottom for programs, i don't know what mac users call it)"It's called the Dock. See "Mac OS X: About the Dock."
3. You wrote: "...this is my first mac..."My "Learning About Mac OS X" FAQ has a number of resources that you will find helpful including books, online training, and more.
4. You wrote: "...Macs: rarely break, when they do, support needed, but support from apple expires 12 days ago, not easily fixed..."You should have bought the AppleCare Protection Plan (ACPP) before your warranty expired. The ACPP provides a two-year extension on the warranty and three years of telephone support.
PS: Word to the Wise: watch the language. I appreciate your frustration, but don't let it into your posts. These forums are "family friendly" and a good way to get banned from them is to rant, use profanity (including profane abbreviations), etc. What passes for "acceptable behavior" on most PC/Windows forums is not tolerated here.
Good luck!
Dr. Smoke
Author: Troubleshooting Mac® OS X
Note: The information provided in the link(s) above is freely available. However, because I own The X Lab™, a commercial Web site to which some of these links point, the Apple Discussions Terms of Use require I include the following disclosure statement with this post:
I may receive some form of compensation, financial or otherwise, from my recommendation or link.

At new command not working

Hi all,
   I pasted my sample code below. In this i have used "At new event" this command is not working in my code, the values are redundant, How to rectify this problem. Pls help me.
Thanks in advance.
Tables : RBKP,
         RSEG.
Data : Begin of itab,
       BELNR like RBKP-BELNR, " Invoice Document Number
       BUZEI like RSEG-BUZEI, " Invoice Item Number
       GJAHR like RBKP-GJAHR, " Fiscal Year
       EBELN like RSEG-EBELN, " Purchase Order Number
       MENGE like RSEG-MENGE, " Invoice Quantity
       RMWWR like RBKP-RMWWR, " Invoice Amount
       WAERS like RBKP-WAERS, " Currency
       MATNR like RSEG-MATNR, " Material Number
       LIFNR like RBKP-LIFNR, " Vendor Code
       ZTERM like RBKP-ZTERM, " Terms of payment key
       End of itab.
Data itab2 like itab occurs 0 WITH HEADER LINE.
data a like rbkp-lifnr.
Selection-screen : Begin of block a with frame title text-001.
Select-options    : LIF For RBKP-LIFNR.
Select-options    : gjahr For RBKP-gjahr.
Selection-screen : End of block a.
Start-of-selection.
select * from rbkp where LIFNR in LIF and GJAHR in gjahr.
if sy-subrc = 0.
    select * from rseg where BELNR = rbkp-BELNR and gjahr = rbkp-gjahr.
      if sy-subrc = 0.
        itab-BELNR = RBKP-BELNR.
        itab-BUZEI = RSEG-BUZEI.
        itab-GJAHR = RBKP-GJAHR.
        itab-EBELN = RSEG-EBELN.
        itab-MENGE = RSEG-MENGE.
        itab-RMWWR = RBKP-RMWWR.
        itab-WAERS = RBKP-WAERS.
        itab-MATNR = RSEG-MATNR.
        itab-LIFNR = RBKP-LIFNR.
        append itab to itab2.
      endif.
    endselect.
endif.
endselect.
Sort itab2 by LIFNR.
loop at itab2.
Move itab2 to itab.
at new LIFNR.
write : / itab-lifnr.
endat.
endloop.
Regards,
Kesav.

Hi
i am sending a sample code where that events worked
you can understand very easily
REPORT ZDAN108.
Using AT FIRST , AT NEW, AT THE END OF , AT LAST.
DATA: BEGIN OF ITAB OCCURS 0,
      F1 TYPE I,
      F2(6) TYPE C,
      F3(10) TYPE N,
      F4(16) TYPE P DECIMALS 2,
      END OF ITAB.
DATA: SUB_TOT(10) TYPE P DECIMALS 3.
**--1
ITAB-F1 = 1.
ITAB-F2 = 'ONE'.
ITAB-F3 = 10.
ITAB-F4 = '1000.00'.
APPEND ITAB.
CLEAR ITAB.
ITAB-F1 = 1.
ITAB-F2 = 'ONE'.
ITAB-F3 = 20.
ITAB-F4 = '2000.00'.
APPEND ITAB.
CLEAR ITAB.
ITAB-F1 = 1.
ITAB-F2 = 'ONE'.
ITAB-F3 = 30.
ITAB-F4 = '3000.00'.
APPEND ITAB.
CLEAR ITAB.
*--2
ITAB-F1 = 2.
ITAB-F2 = 'TWO'.
ITAB-F3 = 10.
ITAB-F4 = '1000.00'.
APPEND ITAB.
CLEAR ITAB.
ITAB-F1 = 2.
ITAB-F2 = 'TWO'.
ITAB-F3 = 20.
ITAB-F4 = '2000.00'.
APPEND ITAB.
CLEAR ITAB.
*-- 3
ITAB-F1 = 3.
ITAB-F2 = 'THREE'.
ITAB-F3 = 10.
ITAB-F4 = '1000.00'.
APPEND ITAB.
CLEAR ITAB.
ITAB-F1 = 3.
ITAB-F2 = 'THREE'.
ITAB-F3 = 20.
ITAB-F4 = '2000.00'.
APPEND ITAB.
CLEAR ITAB.
SORT ITAB BY F1.
LOOP AT ITAB.
AT FIRST.
WRITE: /35 ' MATERIAL DETAILS:'.
ULINE.
ENDAT.
AT NEW F1.
WRITE: / 'DETAILS OF MATERIAL:' COLOR 7 , ITAB-F1.
ULINE.
ENDAT.
WRITE: / ITAB-F1, ITAB-F2, ITAB-F3, ITAB-F4.
SUB_TOT = SUB_TOT + ITAB-F4.
AT END OF F1.
ULINE.
WRITE: / 'SUB TOTAL :' COLOR 3 INVERSE ON, SUB_TOT COLOR 3 INVERSE ON.
CLEAR SUB_TOT.
ENDAT.
AT LAST.
SUM.
ULINE.
WRITE: 'SUM:', ITAB-F4.
ULINE.
ENDAT.
ENDLOOP.
<b>Reward if usefull</b>

Shift commands not working in InDesign CC 2014

All commands were working fine last week but opened up InDesign today and for some reason all the Shift-based commands are not working properly (i.e. automatically drawing 45 degree angles and proportionally resizing shapes). Working on a Macbook Pro 2012 running Yosemite 10.10.1

That's almost always because of system or third party software that's stealing your keyboard shortcuts.
Check System Preferences > Keyboard > Keyboard Shortcuts. Investigate third party software and browsers that may be operating at the same time.
If necessary, set up a new user and launch InDesign in the new user to check the problem.

Host function plus sudo command not working

Hi,
For normal command such as ls, it works.
But when I run the following
v_host := '/usr/bin/sudo -u devuser /test/app/dev/scripts/test.sh
host(v_host);
it does not work.
anyone has idea ? Thanks.
Ivan

I imagine sudo is probably attempting to prompt for a password. I think it depends on who you are logged in as and who you are trying to log in as (and whether you have logged in recently within the last few minutes).
The host command won't support this kind of interaction. It needs to be a command that returns its results without requiring any further prompting.
That would be my guess.

HOST command not working

Oracle AS Version 10.1.2.0.2, Oracle Forms Version 10.1.2.0.2, Windows XP.
I am using HOST command to read a files from the directory (on the server). But HOST does not working. When i click the button to read the file, it just hangs on and no error on the console.
Does host work on forms 10g?
actually i was using client_host of webutil and its working fine. But it pick the directory from the client. Whereas i need to pick it from the server where AS is. That why i went for HOST command.
Any suggestion.

Hi,
Try this.
1. Create a batch file (which would first set the required variables as when you do the "set".)
2. Add the following to the batch file.
C:\javasoft10g\jre\bin\javaw -classpath C:\javasoft10g\jre\lib\rt.jar;C:\javasoft10g\paths;;C:\javasoft10g\paths\dusjava.jar; %1 %2 %3 %4 %5 %6 %7Save the batch file in some location (say c:\mybatchscript.bat).
From forms, call it like
host('cmd /c c:\mybatchscript.bat > c:\temp\testlog.log' );Now, does it work?
-Arun
P.S : Looks to me like, you are setting some variables (or calling another batch file - set , which sets up the variables). So, make sure you set all the required variables in the batch script itself.
-Arun

Java command not working - path problem ?

Im not really new to Java, but rather new to Linux :=)
Ive got NetBeans setup and working great on Redhat 7.2 and I can run Java apps from within the IDE...but not from a command line. I get "bash: java: command not found"
This tells me something is amuk with my path, because obviously the bin folder is not on the path ???
Help :=)

also, ive got this in my .bashrc file
#JDK Home varible
JDK_HOME=/usr/java/j2sdk1.4.0_01

Reg.exe FLAGS command not working in 32bit environments

Similar Messages

Maybe you are looking for