REG: Handling Unit Numbers

Hi All,
Can any one tell me the process of generating the Handling Unit Numbers.
I am basically an abapper and I need to knoe the whole process of
1) creating a handling unit
2) assigning the Material Numbers
3) Generation of Handling Unit Numbers
I would also like to know what T Codes would be used from abap point of view.
Thanks
Srikanth.P

First if you want to pack packing instructions should be maintained.
You can create handling units and assigbning materials to HU through HU02 transaction.

Similar Messages

REG: Tracking Number Generation from Handling Unit Number

Hi All,
I have a scenario where I need to generate the Tracking numbers from the handling Unit Numbers.
For a Delivery : Handling Unit entry exists but there is no entry for the Tracking Number.
I am basically a ABAPPER and now need the Steps/Logic to generate the tracking Number.
Any sorts of help/hints shall be appreciated.
Steps to generate the Tracking Number using the Handling Unit Number.
Thanks and Regards
Srikanth.P

Hi ,
Check out the handling unit item table VEPO. You got storage location(LGORT) in it.
Reward points if it was useful.
Regards,
Abhishek

Assign Delivery Serial numbers to the Handling Unit

Hi,
How can i Assign Delivery Serial numbers to the Handling Unit, is there any User exit to populate serial numbers from delivery to Handling Unit numbers.
Thanks.

Isn't this controlled through config? Check here.
Implementation Guide for R/3 Customizing (IMG)
-->Logistics Execution
   -->Shipping
      -->Basic Shipping Functions
         -->Serial Numbers
            -->Determine Serial Number Profiles
Also see if it can be achieved through copy control and data transfer routines or requirements.
Srinivas

Sharing Handling Units between Inbound and Outbound Delveries?

Hello-
I could use some guidance with how to best setup a handling unit scenario for a Third Party Purchasing process.
1.) Sales Order for Third Party Purchased Material (Vended Finished Good) is created in ECC.
2.) Purchase Order is sent to supplier.
3.) Shipping Label is generated in SAP and is assigned a Handling Unit. Label is sent to supplier.
4.) Supplier affixes this label to product and ships it to our warehouse.
5.) Goods Receipt is performed via Purchase Order (MIGO).
6.) Warehousing activities and Post Goods Issue of Outbound Delivery are performed via this label and Handling Unit.
We would like to do a few new things with this process.
A.) We would like to have the supplier provide us with the HU on their ASNs and generate a Packed Inbound Delivery from it.
B.) We would like the same HU to eventually be associated with the Outbound Delivery to the end customer.
Is their a best practice to share a Handling Unit across an Inbound and Outbound Delivery?
Is EWM Cross Docking the best way to accomplish this?
Are there other proven approaches?
Thanks for your time and help.
-Ron

hi friend
Handling unit number for identity of packing materail , pallet material carrying the carton ,carton the carrying the material
like FG material and tray
identification number controlling the handling unit numbers.
with regards
dinesh

External System Handling Units to SAP ECC System and Pack Outbound DO

Hi Guru
Packing Is done in External System for SAP ECC Sales Order Before Outbound Delivery Creation.
How to capture External System Handling Units in to SAP ECC System and Pack Outbound Delivery Line Items.
Please help
Thanks In Advance
SR

Bit of a cart-before-the-horse situation here.
Lets assume that your business process goes ahead and creates a delivery note, but leaves it unpicked and unpacked. Picking and packing will occur with the inbound IDoc from your external system.
Map the external system data into a basic IDoc type DELVRY0X. I think the current one is DELVRY07.
Use an inbound IDoc message type SHPCON to carry the external system data into your ECC system.
The process code DELV works well with DELVRY0X inbounds. It has lots of user exits. You will need them because you will need a determination process to know which delivery note to update with the external system data.
When you map the handling unit data correctly into the IDoc, the process code will create the handling units on your delivery. The external handling unit numbers should end up in VEKP- EXIDV.
Regards,
zKen

Configuration of external handling unit number range

Hello everyone,
I am working on a project that includes receiving of handling units from outside of our SAP system in EAN128 format, and am running into some challenges in setting up an appropriate external handling unit number range. The process will involve creation of an inbound delivery from an advance ship notice, with the delivery to then be packed based upon handling unit information in the ASN. I have set up an external number range interval in the number range object that is being used for generation of internal handling unit numbers, with the external interval being outside the range of the existing internal intervals. When the ASN is posted, the inbound delivery is created but cannot be packed (status 52), and I get a message stating "The check digit of SSCC 10000001000001648 is incorrect. 5 is correct" (just using this number as an example). In this case, the HU number actually had a leading zero, and changing the sample HU to start with a 5 results in the same message but stating that 0 is correct, which is kind of maddening. The bottom line is that I have not configured an external number range before for handling units and am clearly missing something here. Has somebody set this up successfully and can share your experience, or can point me to some good documentation? I am searching OSS, the Business Process Expert Community, and the overall web in general and am not finding any relevant information.

Per your info,
in std, You cant maintain HU number ranges with respect to year.
Still if you want to maintain, You have to use Userexit for Number ranges.
Generally, all sales documents number ranges are not year specific . ONly FI documents are year specific.
Why you want to have Year specific number ranges for HU's? - It is nothing to do with Year.
Convince your client, This year dependant HU number ranges doesnt carry any value addition. Still client insists, only way to achieve this is "USEREXIT_NUMBER_RANGE"
hope it helps

Handling Units are released once a PGI or PGR is done?

Hello Gurus,
would you please let me know if I have handling units assigned to an inbound delivery oroutbound delivery, once I post the goods receipt or the goods issue, this handling unit numbers should be released from this documents, I mean, this HUs numbers should be un-assigned to this documents?
Is there a process after the PGR or PGI that should un-assign this Handling Units from the SAP documents?
Thanks
J.Alvarado

Thanks very much for this additional information.
I checked my handling units and all are in status 12. But there are handling units in the system from 2008.
I ran the program RHU_AR_ARCHIVABILITY_CHECK and the result was that for all this HU from 2008, the reason they cannot be archived is the next:
Reason 01 : Movement status of the HU does not allow for archiving.
Reason 04: Delivery document not archived.
Do you have any clue of what should I check regarding reason 01?
Thanks
J.Alvarado

Combined Handling unit need single SSCC Number

hi friends
i created delivery and packing also.system is generated two handling unit numbers iam trying to do single sscc number but system is generate two sscc numbers.i need single sscc number..what i do......
wiht regards
dinesh

Hi,
For example, If the system is creating two handling units for 10 pc then check the packing instructions for the material which you have maintianed . if it is 5pc then it willl create 2 HU numbers.
Hope it helps you.
Rgds,
Kris.

Serial numbers in Inbound delivery for Handling units

Hello Experts,
I have the following scenario:
Purchase order + Inbound delivery + GR
Inbound delivery is used because I need to create handling units, the materials included in these handling units are serialized and I am getting from the vendor an excel document with Handling unit number and the serial numbers included in each handling unit.
So I would like to use this document to do the packing process in my inbound delivery instead of manually typing the serial numbers.
What would be the best option to do this?
I also need to do the same for MIGO when no HU are needed.
Any Ideas??
Thanks a lot in advance for your comments.

Thanks a lot for your quick answer.
I would like to avoid creating my own Z transaction, is there any point in packing process where I can include some enhancement to upload the serial numbers, I gues the HU and packing process can be done manually by the user.
I was planning to enhance MIGO for the same process without handling units and I know that there a tab can be added at item level. But I do not know where or how to do it while packing.
Any suggestions?
Thanks a lot for your time!

Serial numbers in handling unit

We generate handling units at the end of production line; the requirement is to capture and store the serial numbers into the handling unit (which works fine) and when the u201Csameu201D handling units are picked for outbound deliveries, the serial numbers are carried along with handling unit created during production which is not working, the system is currently requesting to key in all the serial numbers again during PGI. Can you please let me know how to resolve this issue? Thanks in advance

Hi,
In case of partial HU picking only system will ask serial numbers for HU.
Eg: HU qty - 10pc T.O qty :4pc then system asks which serial no's want to pick from HU.
If it is full HU no need to give serial numbers manually..
Rgds,
Kris.

Handling unit with serial numbers in return delivery

There is a handling unit (HU),whose system status is PSTD(goods issue posted). The delivery is posted. The billing document are issued. Handling unit was packed with materials with equipments and serial numbers.
Now I am creating another sales document(I want to return the good) and return delivery. No handling unit is attached to return delivery. (Why not? Returning original sales document is created with reference to original sales document)
Now I attach the serial numbers to the return delivery. (the same serial numbers which are included(packed) in the above mentioned HU). The return delivery is successfully posted. The status of equipment/serial numbers is on stock.
The problem is that this serial number with equipment is still packed in the original HU.
How can unpack the equipment from HU? I think the problem is the status of HU which is PSTD(goods issue posted).
Or alternative: can I move the HU unit from original delivery and attach it to return delivery?
The changing of the status of HU is not posssible because the original delivery is posted and I do not want to change this original documents anymore too.

I am afraid you are right
- The return delivery was created without HU. ( i mean HU which was originally sold in original delivery. )
Do you think I should create HU for return delivery with the same/different ID? How can I transfer equipment from original delivery HU to return delivery and HU ?
The problem seem to be that the original delivery and HU is locked (sytem status= posted )after posting. If I cancel posting of return delivery then I can attach a new HU. But the equipment is still part of the original HU.
Can I move equipment/serial numbers from original to returned HU? Is that possible at all?
I am talking about phisical same HU, so I guess there should be not 2 different HUs in the SAP system created.
I am looking for the scenario to sell equipment in one HU and return it in the same HU with return delivery.
thank you for your effort and responses

I need to create handling units by serial numbers in HUPAST

Hello Experts,
I need to create handling unit by serial numbers instead of Batch Numbers.
Please suggest me how we can do this.
Thanks,
Gaurav

Hi
Check the following link
https://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/62f21d43-0c01-0010-4094-f870e02c6264
Cheers
Chandra

Mapping handling unit IDs to material numbers

Dear Gurus,
I want to map handling unit IDs to material numbers (MATNR from /SAPAPO/MATKEY). How can I do this? Which tables do I need to join with /SCWM/ORDIM_C?
I found attribute MATID in table /SCWM/ORDIM_C which contains 32 digits and is a hex code. There's also an attribute MATID in /SAPAPO/MATKEY but this one has 22 digits and is a string.
Regards,
Mike

Hi Mike,
To be able to map matid from /scwm/ordim_c to /sapapo/matkey you need to convert it.
Pls use the code below:
data lv_matid like /sapapo/matkey-matid.
CALL FUNCTION 'GUID_CONVERT'
EXPORTING
*   IV_GUID_X16                  =
*    IV_GUID_C22                  =
   IV_GUID_C32                  = /scwm/ordim_c-matid
IMPORTING
*    EV_GUID_X16                  =
   EV_GUID_C22                  = lv_matid
*   EV_GUID_C32                  =
* EXCEPTIONS
*   NO_UNICODE_SUPPORT_YET       = 1
*   PARAMETERS_ERROR             = 2
*   OTHERS                       = 3
IF SY-SUBRC <> 0.
* Implement suitable error handling here
ENDIF.
I hope this will be working for you.
Petr

Assign Serial numbers to handling Units in the Packing

Hi,
I'm using a Function module SERNR_ADD_TO_HU for to add Serial numbers into the handling units. Function module executed successfully and returns a commit value 'X', but table SER06 was not updated. Is there any thing i'm missing (or) is there any other function module for to add serial numbers to the handling uints.
Thanks in Advance.
Narasimha.

Hi Narasimha.
You can use FM WS_DELIVERY_UPDATE to update serial numbers in HU assigned to deliveries.
I've just finished the code (it took me about 4 days to get it right!!! it was driving me crazy, but it's working now!!!).
Please find a sample code below:
DATA FOR BAPI WS_DELIVERY_UPDATE
DATA:
        wa_vbkok_wa         TYPE vbkok,
        wv_delivery         TYPE likp-vbeln,
        bt_vbpok_tab        TYPE TABLE OF vbpok,
        bt_it_sernr_update TYPE shp_sernr_update_t,
        bt_verko_tab        TYPE TABLE OF verko,
        bt_verpo_tab        TYPE TABLE OF verpo,
        bt_it_verpo_sernr   TYPE TABLE OF hum_verpo_sernr,
        bt_it_packing_sernr TYPE TABLE OF hum_rep_sernr,
        bt_et_created_hus   TYPE TABLE OF vekpvb,
        bt_prot             TYPE TABLE OF prott,
        wa_vbpok_tab        TYPE vbpok,
        wa_it_sernr_update TYPE shp_sernr_update_t WITH HEADER LINE,
        wa_verko_tab        TYPE verko,
        wa_verpo_tab        TYPE verpo,
        wa_it_verpo_sernr   TYPE hum_verpo_sernr,
        wa_it_packing_sernr TYPE hum_rep_sernr,
        wa_et_created_hus   TYPE vekpvb,
        wa_prot             TYPE prott,
        wa_ef_error_sernr_update TYPE xfeld.
UPDATE DELIVERY
[0]
... DELIVERY - HEADER ...................................
MOVE s_vbeln    TO wv_delivery.                          "delivery number
MOVE s_vbeln    TO wa_vbkok_wa-vbeln.                    "delivery number
MOVE s_vbeln    TO wa_vbkok_wa-vbeln_vl.                 "delivery number
MOVE 'J'        TO wa_vbkok_wa-vbtyp_vl.
[1]
... DELIVERY ITEM - CONFIRM PICKING .....................
MOVE s_vbeln    TO wa_vbpok_tab-vbeln_vl.
MOVE '00010'    TO wa_vbpok_tab-posnr_vl.
MOVE s_vbeln    TO wa_vbpok_tab-vbeln.
MOVE '00010'    TO wa_vbpok_tab-posnn.
MOVE '2'        TO wa_vbpok_tab-pikmg.
APPEND wa_vbpok_tab TO bt_vbpok_tab.
[2]
... DELIVERY ITEM - UPDATE SERIAL NUMBERS ...............
MOVE s_vbeln    TO wa_it_sernr_update-rfbel.
MOVE '00010'    TO wa_it_sernr_update-rfpos.
MOVE i_sernr1   TO wa_it_sernr_update-sernr.
APPEND wa_it_sernr_update.
MOVE i_sernr2   TO wa_it_sernr_update-sernr.
APPEND wa_it_sernr_update.
APPEND LINES OF wa_it_sernr_update TO bt_it_sernr_update.
[3]
... CREATE HU ASSIGNED TO DELIVERY ......................
MOVE 'BP02'     TO wa_verko_tab-vstel.
MOVE s_matnr    TO wa_verko_tab-vhilm.
MOVE 'E'        TO wa_verko_tab-exida.
MOVE 'BP01'     TO wa_verko_tab-werks.
MOVE '0002'     TO wa_verko_tab-lgort.
MOVE '01'       TO wa_verko_tab-object.
MOVE s_vbeln    TO wa_verko_tab-objkey.
APPEND wa_verko_tab TO bt_verko_tab.
... EXECUTE BAPI (PICKING & HU CREATION) ................
CALL FUNCTION 'WS_DELIVERY_UPDATE'
    EXPORTING
      vbkok_wa                           = wa_vbkok_wa
      synchron                           = 'X'
    NO_MESSAGES_UPDATE                 = ' '
      commit                             = 'X'
      delivery                           = wv_delivery
      update_picking                     = 'X'
      nicht_sperren                      = space
      it_sernr_update                    = bt_it_sernr_update
   IMPORTING
      ef_error_sernr_update              = wa_ef_error_sernr_update
   TABLES
      vbpok_tab                          = bt_vbpok_tab
      verko_tab                          = bt_verko_tab
      et_created_hus                     = bt_et_created_hus
      prot                               = bt_prot.
CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'.
[4]
... PACK ITEMS ..........................................
LOOP AT bt_et_created_hus INTO wa_et_created_hus.
... ITEMS:
    MOVE wa_et_created_hus-exidv   TO wa_verpo_tab-exidv_ob.
    MOVE wa_et_created_hus-exidv   TO wa_verpo_tab-exidv.
    MOVE '1'       TO wa_verpo_tab-velin.
    MOVE i_matnr1 TO wa_verpo_tab-matnr.
    MOVE s_vbeln   TO wa_verpo_tab-vbeln.
    MOVE '00010'   TO wa_verpo_tab-posnr.
    MOVE '2'       TO wa_verpo_tab-tmeng.
    MOVE 'BP01'    TO wa_verpo_tab-werks.
    MOVE '0002'    TO wa_verpo_tab-lgort.
    MOVE '2'       TO wa_verpo_tab-anzsn.
    MOVE s_vbeln   TO wa_verpo_tab-rfbel.
    MOVE '00010'   TO wa_verpo_tab-rfpos.
    APPEND wa_verpo_tab TO bt_verpo_tab.
... SERIAL NUMBERS:
    MOVE wa_et_created_hus-exidv   TO wa_it_verpo_sernr-exidv_ob.
    MOVE s_vbeln                   TO wa_it_verpo_sernr-belnr.
    MOVE '00010'                   TO wa_it_verpo_sernr-posnr.
    MOVE i_sernr1                  TO wa_it_verpo_sernr-sernr.
    APPEND wa_it_verpo_sernr       TO bt_it_verpo_sernr.
    MOVE i_sernr2                  TO wa_it_verpo_sernr-sernr.
    APPEND wa_it_verpo_sernr       TO bt_it_verpo_sernr.
ENDLOOP.
MOVE '1'                         TO wa_it_packing_sernr-zeile.
MOVE i_sernr1                    TO wa_it_packing_sernr-sernr.
APPEND wa_it_packing_sernr       TO bt_it_packing_sernr.
MOVE i_sernr2                    TO wa_it_packing_sernr-sernr.
APPEND wa_it_packing_sernr       TO bt_it_packing_sernr.
... HU HEADER:
CLEAR bt_verko_tab. REFRESH bt_verko_tab.
MOVE wa_et_created_hus-exidv TO wa_verko_tab-exidv.
APPEND wa_verko_tab TO bt_verko_tab.
... EXECUTE BAPI (PACK ITEMS INTO HU) ...................
CALL FUNCTION 'WS_DELIVERY_UPDATE_2'
    EXPORTING
      vbkok_wa                           = wa_vbkok_wa
      synchron                           = 'X'
      commit                             = 'X'
      delivery                           = wv_delivery
   TABLES
      verko_tab                          = bt_verko_tab
      verpo_tab                          = bt_verpo_tab
      it_verpo_sernr                     = bt_it_verpo_sernr
      it_packing_sernr                   = bt_it_packing_sernr
      prot                               = bt_prot.
CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'.
Hope it helps!
This is my first post in this forum. Don't forget to vote if the solution suits you!
Thanks,
-ct-

Reg : How to update handling unit packing details

Hi all
I want to update existing handling unit with new tare weight and gross weight using FM ws_delivery_update.
how exactly to proceed?
regards
jawahar

Hi Dude,
I was searching on SDN for updating the handling units. My requirement is similar to yours "Updating Weight and LengthWidthHeight". Can you please help me out as it has been long time the query was posted and i hope u might have completed it. I searched a lot on google and tried many function modules and BAPI also, but its not updating the handling unit.
Please help me and let me know..
Thanks in advance

REG: Handling Unit Numbers

Similar Messages

Maybe you are looking for