Reg: Help

Hi All,
I am new to this OBIEE... Even i question may be very silly.. I will be happy , if any one in forum group help me. I heard from my friends that OBIEE was used to creating report. I want the basic purpose why OBIEE is used and Wat component it has and its useful too.. Basically i am technical Consultant, in which i have to focus on OBIEE. Plz help me out with your valuable suggestion.
Thanks in Advance
--Happy

Hi,
Look on the below thread
Re: need help
And see below link also helpful for you,
http://www.biblogs.com/2008/02/15/a-future-oracle-obiee-architecture/
Thanks,
Balaa...
Edited by: Balaa on Jun 4, 2010 12:16 PM

Similar Messages

Reg:-Help in Inventory

Hi all,
How to know inventory org assosicated to Master Org in Inventory. Any Table or View are capturing this details . Help me on this.
Thanks in advace
--Sandy

Reg: Inventory Help

Flash 6 reg. help

Hello,
I downloaded Flash 6 and was very pleased so I decided to buy
the registration key...
I waited until the trial ended to put my registration key
in... dont know why....
now there is no way for me to select register, the start
screen simply says "trial period blah,blah,blah"
Pleeeeeeeease.... help!

ai_anarki wrote:
> please some1 help me in any way...
Macromedia do not sale Flash 6 for last 3 years.
You a bit over due with the registration.
Contact customer support, they will be able to help you
www.adobe.com
Best Regards
Urami
<urami>
If you want to mail me - DO NOT LAUGH AT MY ADDRESS
</urami>

Reg:Help option in IR and ID

hi friends
how i can find documentation for each object in XI i mean like F1 help in ABAP is there any option in XI . i need documentation for Adapter objects node in repository.
Thanks & regards
suman

Hi Suman,
There is no F1 help in XI/PI.
All you can do is to refer Help.sap.com
Check this for Adapter Objects:
http://help.sap.com/saphelp_nw04/helpdata/en/65/dfc755843b734992ce0d8f93f35178/frameset.htm
and this for other XI objects:
http://help.sap.com/saphelp_nw04/helpdata/en/0f/80243b4a66ae0ce10000000a11402f/frameset.htm
Sachin

Reg:help for f4 help

hi,
i want create f4 help for MSEG-MBLNR on selection screen.
please give solution for that

hi,
thanks for ur reply,
that is working. but here my requirement is on selection screen i am give doc.year (mjahr)and plant( werks) based on that
i need to get material doc no(mblnr)

Reg:help on E&m config

Dear experts,
My setup is like this
router with E&M (2800)----ip cloud----router with fxs--analog phone.
now i want to dial a call through e/m it should land on fxs
and from fxs to call land on pbx(e/m)
so plz help me how can i configure the routers.
Any body can help i am very thankfull to him,and also iam attaching the diag also.
Tha ks&Regards
srini

2600 router with FXS:
dial-peer voice 1 pots
destination pattren 101
port 1/0/0
dial-peer voice 2 pots
destination pattren 102
port 1/0/1
dial-peer voice 3 voip
destination-pattren 2..
session-target ipv4:192.168.1.1
2800 router connected to pbx:
Configuring an E&M analog trunk is straightforward. Three key options have to be set:
ô The signaling E&M signaling type
ô Two- or four-wire operation
ô The E&M type
Both sides of the trunk need to have a matching configuration. This example configuration
shows an E&M trunk using wink-start signaling, E&M type 5, and four-wire operation.
Because E&M supports inbound and outbound DNIS, DID is also configured on the
corresponding dial peer:
voice-port 0/2/0
signal wink-start ! default
operation 4-wire
type 5
voice-port 0/2/1
signal wink-start
operation 4-wire
type 5
so make sure u have the config in the router similer to the pbx E&M .. OK
then make the following dialpeers
dial-peer voice 9 voip
destination-pattren 1..
session target ipv4:192.168.1.2
dial-peer voice 10 pots
destination-pattern 2..
direct-inward-dial
port 0/2/0
forward-digits all
dial-peer voice 11 pots
destination-pattern 2..
preference 2
direct-inward-dial
port 0/2/1
forward-digits all
prefrence word mean if port 0/2/0 no available the dial-peer 11 over port 0/2/1 will takover
Specify how many wires are used for voice transmission using the operation {2-wire | 4-wire} command. Note that this defines the wires used for the audio path only, not for signaling. The default is two-wire operation.
Specify the E&M interface type to which this port is connected using the type {1 | 2 | 3 | 5} command. On the VIC-2E/M or VIC2-2E/M interface module, you must set both ports to the same interface type
If the port configuration is correct and you are still having problems placing or receiving calls on the trunk, the first place to look is at the wiring between the PBX and the voice gateway. As mentioned, the most common problem encountered with E&M trunk is incorrect wiring
good luck
If helpfule Rate

Reg: Help on Link in SAP Screen Programming

Hi Experts,
I have a requirement to display a link in dialog programming. When i click the link then it has to take me to the required page.
Can anyone help me on how to achieve this.
Kindly help.

Hi,
We can do it in Web Dynpro's for ABAP.
In the interactive event of an UI element in Module pool, we need to call the Webdynpro application which inturn calls the web page.
Thanks & Regards,
Chandralekha.

Reg: help on instantiation of class in workflow task

Hi Geeks,
I am trying to use class for Purchase order though standard workflow is available with BO. As per the requirement the triggering event is same as in the standard workflow with BO. Once the workfow is triggered ,The data is pulled to class from BO and custom release step is defined for release in class .
I face problem with the instantiation of class in workflow task while passed the po value and defined binding for the same after reading the document posted by jocelyn dart regarding this as follows :[www. wiki.sdn.sap.com/.../UsingABAPOOmethodsinWorkflowTasks |www. wiki.sdn.sap.com/.../UsingABAPOOmethodsinWorkflowTasks ]
I am getting error as " Formal parameter " po number " not defined.Please Advice.
Regards,
Kumar.

Hi,
I checked the same still no luck. I checked approx all combination.
First I created a SOA-SAR file(jar file) , I extracted it and checked all jar files were there. orabpel.jar and bpm-services.jar and log4j jar. when i deployed that jar file. but it was not working
then I put this in weblogic sever lib. it not worked.
please tell me some points

Hi, I am having issues with FTP in dreamweaver CS4

I am having a problem uploading a new site to my hosting provider using CS4. The error message I get is as follows. An FTP error occurred - cannot make connection to host. Your login or pasword are incorrect. Please check your connection information.
So far I have ,
Checked twice my login/password etc with host.
Changed password and re tried
Interestingly I have already uploaded two prev sites from the same machine, with the same CS4 to the same Host (123-reg)
Help !

Hi Gary
thanks for reply.
Tried all the above including toggling between passive etc.
Interestingly in the FTP host box I was putting in what my host instructed, however i have now started to try putting http;// and some other variations
in. Now the error message has changed
FTP error occurred - cannot make connection to host remote host cannot be found
The good news is CS4 now at least is showing a dialogue box showing it is attempting to make a connection.
Is there any rules etc when inputting FTP host and host directory? i.e use of / or . /
on a past site I was told the host directory was public_html but got it working by putting /public_html/
I think you are right with the site defenition being the issue, please advise
regards
Mark

I have an ipod touch 4 gen and i reg it on my desk top then a power surge blew it up so i put i tunes on my laptop but now it will not let me do anything to the ipod can any one help me

i have an ipod touch 4th gen i reg it on my decktop then it had a power surge and blewup so i put itunes on my laptop and now it will now let me do anything to my apps pics or music what can i do i tried to reinstall but that didnt work i dont want to restart because of the pics and video that is the only copy i have now please help me

Is your device recognized by your computer? If yes, copy the pictures and videos as shown in this article:
Copying personal photos and videos from iPhone, iPad, or iPod touch to your computer
If it is not recognized, try this first: iOS: Device not recognized in iTunes for Windows
Disable autosync in iTunes, right click on it in the device list and choose "transfer purchases" to copy apps and other media bought in iTunes to your new library.
Do the same again and choose "backup", to create a manual backup without syncing.
Since your device will be erased due to the new iTunes library during the first sync, you can use this backup afterwards to restore your settings and data.
Set up at least one contact and event on your computer before you start, to be able to merge calendars and contacts.

I have two apple products registered to the same apple id. I would like to use FaceTime on my iPad while out of town. I need to do FaceTime to my iMac at home (both iPad and imac are reg. to same id). It won't let me do it, help?

I have two apple products registered to the same apple id. I would like to use FaceTime on my iPad while out of town. I need to do FaceTime to my iMac at home (both iPad and imac are reg. to same id). It won't let me do it, help?

You should really read the manual.
"How do you restore from backup? "
Restore. When given the choice, choose to use backup.
"And how can I check to see if the pics and videos are on my computer somewhere first??"
They would only be where you put them. What program did you use to import them? Pics/vids taken with ipod are not part of the sync process at all. You should be importing them just as you would with any digital camera.
If you did not import them, then they are not on your computer.

I've entered my reg. code for Quick Time Pro but it doesn't appear to have installed ... it's not showing in my apps folder. Anyone help me?

I've entered my reg. code for Quick Time Pro but it doesn't appear to have installed ... it's not showing in my apps folder. Anyone help me?

I've entered my reg. code for Quick Time Pro but it doesn't appear to have installed ... it's not showing in my apps folder. Anyone help me?
The QT X v10.1 app installs in your "Applications folder and QT 7 v7.6.6 (whether keyed for "Pro" use or not) is installed in the "Applications/Utilities" folder. It is recommended you keep them in these locations so they will continue to update correctly/automatically.

Please help! iweb and 123-reg.co.uk

Hi,
I have read the various postings and still have no idea what I am doing.
I have gone to my my DNS settings and what I have is:
@ A 194.154.164.82
www CNAME web.mac.com. (I can't seem to lose the dot on the end)
www CNAME 194.154.164.82
mx0.123-reg.co.uk. Priority 10
mx1.123-reg.co.uk Priority 20
I have turned web forwarding off but this hust sends my domain to a holding page care of 123-reg.co.uk Should I turn web forwarding on - if so what URL do I ask it to forward to?
Any help would be much appreciated.
Kind regards
Matthewmacduff

Hi there,
I hope you've sorted your problem out. I'm also with 123.reg and had similar problems which have mostly been resolved. If your still struggling. Log in to 123reg.co.uk and go to your control panel. Click on web fowarding and select either framed or non framed forwarding. Add your site to the add url eg http://web.mac.com/yourname. Add title to be displayed in browser (presumably you've registered/bought a name with 123reg)...thats it
My problem with 123reg's system is that it, to me, isn't particularly user friendly. My web forwarding works great but the browser bar only ever shows smandrews.com and not smandrews.com/home/html...anybody know why?

Reg exp help

Hi
I want to extract the first token of filename (and not the directory path) from a string like this:
D:\MIRACLE\UPLOADS\1361\HG-ORA02#xaldb#alertlog_contents#22022010111941.mirdf.loadfailed_240210095258_62
HG-ORA02#xaldb#alertlog_contents#22022010111941.mirdf.loadfailed_240210095258_62
\HG-ORA02#xaldb#alertlog_contents#22022010111941.mirdf.loadfailed_240210095258_62
/HG-ORA02#xaldb#alertlog_contents#22022010111941.mirdf.loadfailed_240210095258_62
the tokens would bed HG-ORA02 in all instances
Could you help me creating a reg expression to get the token?
best regards
Mette

Hi,
Whenever you have a problem, it helps if you post your sample data in a form people can use.
CREATE TABLE and INSERT statements are great; so is:
CREATE TABLE     table_x
AS          select 'D:\MIRACLE\UPLOADS\1361\HG-ORA02#xaldb#alertlog_contents#22022010111941.mirdf.loadfailed_240210095258_62'
               AS filename, 1 as x_id FROM dual
UNION ALL     SELECT 'HG-ORA02#xaldb#alertlog_contents#22022010111941.mirdf.loadfailed_240210095258_62'
               AS filename, 2 as x_id FROM dual
UNION ALL     SELECT '\HG-ORA02#xaldb#alertlog_contents#22022010111941.mirdf.loadfailed_240210095258_62'
               AS filename, 3 as x_id FROM dual
UNION ALL     SELECT '/HG-ORA02#xaldb#alertlog_contents#22022010111941.mirdf.loadfailed_240210095258_62'
               AS filename, 4 as x_id FROM dual
;It also helps if you explain how you get the results you want from that data.
Assuming that
(a) the filename is divided, first, by '/' or '\' characters, and
(b) each of those parts may be divided into tokens by '.' or '#' characters, and that
(c) we want the first (b) part of the last (a) part:
SELECT     REGEXP_SUBSTR ( REGEXP_SUBSTR ( filename
                          , '[^/\]*$'
                , '[^.#]+'
                ) AS token_1
FROM     table_x;Here, the inner REGEXP_SUBSTR finds the last part delimited by / or \. You can add other delimiters by putting them in the square brakets, anywhere after ^.
The outer REGEXP_SUBSTR operates on the results of the inner one. It returns the first part delimited by . or #. Again, you can add other delimiters.

CFINPUT Reg Expression Validation Pattern Help

I've got a form with a non-required field that needs to meet
some validation requirements (Numbers, Letters, 'space character'
or 'blank, empty string' only) if the user chooses to fill it
out...
I'm using CFINPUT tag with the following settings, does my
Reg Expression pattern look OK?
REQUIRED="No"
VALIDATE="regular_expression"
PATTERN="^[a-zA-Z *]{1,40}$"
MAXLENGTH="40"
Thanks for any help. I'm v. new to regular expressions (10
hrs education at Google Univ.)
Sincerely,
Paul Cross

I think you want something more like this:
^[a-zA-Z0-9 ]{0,40}$

Reg: Help

Similar Messages

Maybe you are looking for