Reg:- How-to build dependent lists boxes with ADF and Faces(Frank.Nimphius)

Hi,
by using this i try to create a parent child relationfor selectonechice box and table.
this is woking properly but as i start selecting values in SelectOneChice Box, value in tabel are seems to be Disappears.
even i create navigation list and map them properly..
please suggest me about this.
Regards:-
Bkumar

Thanks for reply...
but this is not one that i wants...<< Need to create Depandent selectOnechoice and table Adf page>>
i created one parent SelectOneChoice list having some values, and one child tabel for there values. Navigation List.even i checked Auto Submit and Id for parent, and Partial triger for Child.
When irun this application the values are not coming properly.
please help me about this.

Similar Messages

Need help with dependent lists boxes with ADF.

Hello,
I am doing a project that use tree dependent list boxes.
Ex. State---->
College---->
List of courses of the college chosen above----->
The way this should work is when I select the state automatically I want it to change to the correspondent list of colleges of that state and after i choose the colleges I want to be able to get all the courses that are given in that college.
To implement the first two list boxes I create tree views on JDeveloper and and using SelectOneChoice for both State and Colleges. In the binding editor I bind the first View with the second and then the second view with the third and at this point if I execute the first SelectOneChoice would give me all the state and the second SelectOneChoice would give me the list of all the colleges that exist.
Now on the third view that I create a binding variable and i put a Where state=:TheBindingVariable on the query.
Also I set the first SelectOneChoice the outoSubmit property to true, id to StateId and PartialTrigger property to CollegeId.
On pageDef.xml in the bindings I create action form where I select the third view from Date Collection and select Action as ExecuteWithParams. And I set the value under the parameters section to #{bindings.state.inputValue}.
Under executables still in pageDef.xml I create a invokeAction and I set binds = ExecuteWithParams.
On first SelectOneChoice on the ChangeValueListener i create a new ManageBeans which generate me a java class and I create a new method as well to use it to change the binding variable on the second SelectOneChoice.
Here is the method:
public void Change_StateId(ValueChangeEvent valueChangeEvent) {
String StateId;
valueChangeEvent.setPhaseId(PhaseId.INVOKE_APPLICATION);
FacesContext adi = FacesContext.getCurrentInstance();
ValueBinding vb = adi.getApplication().createValueBinding("#{bindings}");
DCBindingContainer bc = (DCBindingContainer)vb.getValue(adi);
if(valueChangeEvent.getNewValue().toString().equals("0")){
StateId = "MA";
OperationBinding opBindingCollegeLovIter = (OperationBinding) bc.get("ExecuteWithParams");
opBindingCollegeLovIter.getParamsMap().put("TheState",StateId);
opBindingCollegeLovIter.execute();
}else{
DCIteratorBinding statesLovIter = (DCIteratorBinding) bc.get("CollegeProvaView1Iterator");
Row rw = statesLovIter.getRowAtRangeIndex(((Integer)valueChangeEvent.getNewValue()).intValue());
StateId = (String) rw.getAttribute("State");
OperationBinding opBindingCollegeLovIter = (OperationBinding) bc.get("ExecuteWithParams");
opBindingCollegeLovIter.getParamsMap().put("TheState",StateId);
opBindingCollegeLovIter.execute();
I don't know what I have done wrong because I am new in this field and a little support would be really helpful.
I am using JDeveloper 10.1.3.1.0 and Oracle SOA Suite 10.1.3.1.0.
I would appreciate any help.
Thanks a lot.

user8116089 wrote:
For some reason the first selectonechoice doesn't give me all the states that are in the database it gives me just the first 10.check the value of RangeSize for itarator in pageDef. in this case to show all items it must be set to -1
Also there is a way to assign the first value of the first selectonechoice to null at the start.this is a problematic requirement since all items are bound to iterator and basically this should serve for navigation purpose so the first item is set as selected, but maybe some workaround exists...
regards,
Branislav

How-to create dependent list boxes in a table -Frank Sample

hi everyone i would like to ask a suggestion about Frank's example on How-to create dependent list boxes in a table -Frank Sample ...
i want to extend this example for 3 dependent lists... including locations, departaments and employes....
this the ListboxBean java that Frank is using in his example.... and this is only for locations and departaments tables and it works ok... i want to add the third list for employers wich is dependent only from departaments list.... as i am not good in java i would like to ask u a suggestion on how to develop the third list in this java class ...
public class ListboxBean {
private SelectItem[] locationsSelectItems = null;
private SelectItem[] departmentsSelectItems = null;
public SelectItem[] getLocationsSelectItems() {
if (locationsSelectItems == null){
FacesContext fctx = FacesContext.getCurrentInstance();
ValueBinding vbinding = fctx.getApplication().createValueBinding("#{bindings.LocationsView1Iterator}");
DCIteratorBinding locationsIterBinding = (DCIteratorBinding) vbinding.getValue(fctx);
locationsIterBinding.executeQuery();
Row[] locRowsArray = locationsIterBinding.getAllRowsInRange();
// define select items
locationsSelectItems = new SelectItem[locRowsArray.length];
for (int indx = 0; indx < locRowsArray.length; indx++) {
SelectItem addItem = new SelectItem();
addItem.setLabel((String)locRowsArray[indx].getAttribute("City"));
addItem.setValue(locRowsArray[indx].getAttribute("LocationId"));
locationsSelectItems[indx] = addItem;
return locationsSelectItems;
return locationsSelectItems;
public SelectItem[] getDepartmentsSelectItems() {
FacesContext fctx = FacesContext.getCurrentInstance();
ValueBinding vbinding = fctx.getApplication().createValueBinding("#{row}");
JUCtrlValueBindingRef rwJUCtrlValueBinding = (JUCtrlValueBindingRef) vbinding.getValue(fctx);
Row rw = rwJUCtrlValueBinding.getRow();
if (rw.getAttribute(6) != null){
OperationBinding oBinding = (OperationBinding) fctx.getApplication().createValueBinding("#{bindings.ExecuteWithParams}").getValue(fctx);
oBinding.getParamsMap().put("locId",rw.getAttribute(6).toString());
oBinding.execute();
ValueBinding vbinding2 = fctx.getApplication().createValueBinding("#{bindings.DepartmentsView2Iterator}");
DCIteratorBinding departmentsIterBinding = (DCIteratorBinding) vbinding2.getValue(fctx);
departmentsIterBinding.executeQuery();
Row[] depRowsArray = departmentsIterBinding.getAllRowsInRange();
// define select items
departmentsSelectItems = new SelectItem[depRowsArray.length];
for (int indx = 0; indx < depRowsArray.length; indx++) {
SelectItem addItem = new SelectItem();
addItem.setLabel((String)depRowsArray[indx].getAttribute("DepartmentName"));
addItem.setValue(depRowsArray[indx].getAttribute("DepartmentId"));
departmentsSelectItems[indx] = addItem;
return departmentsSelectItems;
public void setLocationsSelectItems(SelectItem[] locationsSelectItems) {
this.locationsSelectItems = locationsSelectItems;
public void setDepartmentsSelectItems(SelectItem[] departmentsSelectItems) {
this.departmentsSelectItems = departmentsSelectItems;
Thanks in advance :0

Hi,
I think that all you need to do is to look at how I implemented the dependent detail for querying the Employees select items
Then you make sure the DepartmentsVO and the EmployeesVO have bind variable to query them according to the pre-selected value in their respective master list
Frank

How to add a list box with values for a ztable in SM30

Hello Gurus,
I had created a table maintenance for Ztable and added many extra functionality to that. Now i would like to add a list box or check table for a field. Can i do that with out Regenerating my table maintenance. Please help me its..very urgent.

Have referred this domain to the data element, this should be the Field type in ur table for the particular field.
Eg: <b>SE11 > table name > fields-ZTEST > fieldtype-ZZTEST</b>
ZZTEST in the data element > create a domain for this data element and in that specify teh value range.
Save and activate it.
Make sure that u regenerate teh table maintenance generator else u cant see the changes.
Now if u press F4 u can see only thevalues specified, also u will see only the list box with values in SM30.
Try this,please let me know if u face any difficulties.

How to display warning message box with yes and no buttons

Hi,
I am writing the code to delete emp details from database.
I want to display warning message with yes and no buttons after clicking the delete button in the same page, if yes is clicked, i want to invoke delete() method in AM.
Is it possible, if yes pls suggest me how to do it.
Thanks
Message was edited by:
user536125

This is being discussed in
warning message(dialog page) to be displayed in the same page
Thanks
Tapash

ADF Faces Dependent list boxes in an editable table

Hi,
I'm working with JDeveloper 10.1.3.1.0.
I saw the topic "How to build dependent list boxes with ADF II" on F. Nimphius' Blogbuster.
There it is shown how to handle dependent list boxes in an ADF Faces form. I tried this for an editable table but it doesn't work correctly: If there is more than one row in the resultset of the table, both dependent list boxes have the same content in all the rows though the content in the database is different.
Can anyone help me?
Thanks.

Ok - I will try.
I built the listboxes like it is described in "ADF Faces: How to built dependent lists boxes with ADF and ADF Faces Part II", Frank Nimphius' Blogbuster July, 2006.
This is the full code of my ManagedBean:
package asdb.view.backing;
import javax.faces.context.FacesContext;
import javax.faces.el.ValueBinding;
import javax.faces.event.ValueChangeEvent;
import javax.faces.model.SelectItem;
import oracle.adf.model.OperationBinding;
import oracle.adf.model.binding.DCIteratorBinding;
import oracle.adf.view.faces.component.core.input.CoreInputText;
import oracle.binding.BindingContainer;
import oracle.jbo.Row;
import oracle.jbo.ViewObject;
import oracle.jbo.client.Configuration;
import oracle.jbo.uicli.binding.JUCtrlValueBindingRef;
public class AktMitFktEdit {
private BindingContainer bindings;
public AktMitFktEdit() {
public void kategorieWechsel(ValueChangeEvent valueChangeEvent) {
// Add event code here...
BindingContainer bc = this.getBindings();
DCIteratorBinding kategorienIter = (DCIteratorBinding)
bc.get("OrganKategIterator1");
Row rw =
kategorienIter.getRowAtRangeIndex(((Integer)valueChangeEvent.getNewValue()).intValue());
String kategorie = (String)rw.getAttribute("Kategorie");
OperationBinding opBindingOrganeLovIter = (OperationBinding)bc.get("ExecuteWithParams");
opBindingOrganeLovIter.getParamsMap().put("kategorieParam",kategorie);
opBindingOrganeLovIter.execute();
public void setBindings(BindingContainer bindings)
this.bindings = bindings;
public BindingContainer getBindings() {
return bindings;
It works fine, when the user only want to update existing rows. But if he had inserted a new row and afterwards want to update existing rows, the listboxes don't show the correct contents. No error messages are displayed.

How to use dynamic list box in survey builder?

Hello,
Could someone give me a little bit of thread? How to use dynamic list box in survey builder?

Hi Liu,
Dynamic combo boxes::A combo box is dynamic if it references a document property for which a value set is defined in the configuration (System Administration ® System Configuration ® Content Management ® Global Services ® Property Metadata ® Properties ® Parameter Allowed Values).
At runtime (when you open the creation form) the system reads these values from the configuration and displays them in the dropdown list.
If you link a combo box for which list entries already exist to a document property with a value set, the system asks whether you want to delete the list entries. it is recommend that you accept this suggestion and delete the list entries from the XML Forms Builder. Otherwise inconsistencies could arise between the entries in the XML Forms Builder and the value set in the configuration. This can cause errors when saving.
Also you may Refer the Link for Further help:
http://help.sap.com/saphelp_crm50/helpdata/en/29/c40d3d2a83752de10000000a114084/frameset.htm
http://help.sap.com/saphelp_crm50/helpdata/en/00/9e7f41969e1809e10000000a155106/frameset.htm
http://help.sap.com/saphelp_crm50/helpdata/en/a7/5a874174a8050de10000000a1550b0/frameset.htm
Hope it Answers your Queries..
Thanks and Regards,
RK.

How to edit the list box items in labwindow/CVI?

how to edit the list box items in labwindow/CVI?

Listbox items cannot be edited directly in the control: what you can do is to select a line an, transfer its content to a textbox control, edit text there and move text back to the listbox control. Available interactions with the listbox control are listed in the help.
An alternative to it is to use a tree customized to appear like a listbox: tree item labels can be edited directly in the control, at least those in the base column of the tree. You can look at the example \samples\userint\treelist.cws that shows how a tree can be customized this way. I haven't opened it, but this old example too should show the ability to edit tree cells.
Proud to use LW/CVI from 3.1 on.
My contributions to the Developer Zone Community
If I have helped you, why not giving me a kudos?

How to populate a list box linked to selection in combo box?

Hi All,
I am a beginner in Xcelsius. I am having problem on how to populate a list box based on the selection on my combo box.
I have a combo box and a list box. The combo box value consist of Countries. Values are:
Singapore
Indonesia
Thailand
When I select, for i.e. Indonesia, I want to populate the list box with all the Postal Code of Indonesia. When I select Thailand, i want to do the same.
Can anyone shed some lights on how to achieve this?
My spreadsheet data is as follow
Country         Postal Code
Singapore     680123
Singapore     680124
Singapore     680125
Indonesia     155123
Indonesia     155124
Indonesia     155125
Indonesia     155126
Thailand       333123
Many Thanks,
Harianto

Hi,
I am detailing the complete steps below:
In the combobox select the entire range of Country while seeing the records from the Combobox, Xcelsius will automatically show the unique values in the selection.
After that in the "Data Insertion" section for Combobox select the "Insertion Type" as "Filtered Rows" (please click on the question mark beside this option and it will show how the selection works).
In the source select the postal code, in the destination select the range which will be used as a data source for the list box.
This will resolve the concern. Please remember to select the question mark beside the "Insertion Type" option, it explains the working in specific details.
Best of luck.
Regards,
Gourav

Dependent List Boxes

Can't figure what is wrong with this code. Any ideas? My page
is blank unless I remove this code. If I remove the below code the
page shows the form and the list boxes but the last dependent list
box is not functioning properly...

<script language="JavaScript">

</script>

Try something like this:
<span spry:region="dsStates" id="stateSelector">
<select spry:repeatchildren="dsStates" name="stateSelect"
onchange="document.forms[0].citySelect.disabled = true;
dsStates.setCurrentRowNumber(this.selectedIndex);">
<option spry:if="{ds_RowNumber} == {ds_CurrentRowNumber}"
value="{name}" selected="selected">{name}</option>
<option spry:if="{ds_RowNumber} != {ds_CurrentRowNumber}"
value="{name}">{name}</option>
</select>
</span>
City:
<span spry:region="dsCities" id="citySelector">
<select spry:repeatchildren="dsCities" id="citySelect"
name="citySelect" onchange="document.forms[0].schoolSelect.disabled
= true; dsCities.setCurrentRowNumber(this.selectedIndex);">
<option spry:if="{ds_RowNumber} == {ds_CurrentRowNumber}"
value="{name}" selected="selected">{name}</option>
<option spry:if="{ds_RowNumber} != {ds_CurrentRowNumber}"
value="{name}">{name}</option>
</select>
</span>
<span spry:region="dsSchools" id="schoolSelector">
<select spry:repeatchildren="dsSchools" id="schoolSelect"
name="schoolSelect" onchange="window.location=this.value;">
<option spry:if="{ds_RowNumber} == {ds_CurrentRowNumber}"
value="{url}" selected="selected">{name}</option>
<option spry:if="{ds_RowNumber} != {ds_CurrentRowNumber}"
value="{url}">{name}</option>
</select>
--== Kin ==--

"Dynamic List Box with Single Selection" Survey Suite in CRM 6.0

Hi
I am using CRM 6.0. There in Survey Suite there are 2 answering options "Dynamic List Box with Single Selection" & "Dynamic List Box with Multiple Selection". I am able to make out, how we can assign values to this. I have seen example "Example_Dynamic_survey" also.
I believe we have to use programming for populating this. But how do we have to carry that out.
Thanx and Regards
Hitesh

Hi Hitesh,
There is no need of programming for populating values for Answer category 'List Box with Single Selection' or 'List Box with Multiple Selection'. You have to follow the following steps to populate values for those:
- In the Answer Category select List Box with Single Selection from drop down list
- Then on left hand side tree, right click on Answer and select Insert Answer Option (Answer->Insert Answer Option)
- Then on right side, provide Text for the answer (value)
- To add more values, repeat the process Answer->Insert Answer Option and providing text for those answers in the right side.
Similarly you can populate values for 'List Box with Multiple Selection' also.
This has to be done in the transaction CRM_SURVEY_SUITE.
Hope this is clear to you
regards
Srikantan

How can we use list box on selection screen

hi, howe can we use list box on selection screen and how can we populate the dat ainto the list box and how can we retrive data based on list box from ther database.
thanks in advance
raju

Use the VRM_SET_VALUES function module.
DATA: list              TYPE vrm_values,
      value             LIKE LINE OF list.
           AT SELECTION SCREEN OUTPUT
AT SELECTION-SCREEN OUTPUT.
name = 'P_OBJECT'.
CLEAR list.
REFRESH list.
CLEAR value.
value-key = '1'.
value-text = 'Development Class'.
APPEND value TO list.
CLEAR value.
value-key = '2'.
value-text = 'Program'.
APPEND value TO list.
CLEAR value.
value-key = '3'.
value-text = 'Function Module'.
APPEND value TO list.
CLEAR value.
value-key = '4'.
value-text = 'Database Table'.
APPEND value TO list.
CLEAR value.
value-key = '5'.
value-text = 'Structure'.
APPEND value TO list.
CLEAR value.
value-key = '6'.
value-text = 'View'.
APPEND value TO list.
CLEAR value.
value-key = '7'.
value-text = 'Data Element'.
APPEND value TO list.
CLEAR value.
value-key = '8'.
value-text = 'Table Type'.
APPEND value TO list.
CLEAR value.
value-key = '9'.
value-text = 'Class / Interface'.
APPEND value TO list.
CLEAR value.
value-key = '10'.
value-text = 'Type Group'.
APPEND value TO list.
CLEAR value.
value-key = '11'.
value-text = 'Domain'.
APPEND value TO list.
CLEAR value.
value-key = '12'.
value-text = 'Search Help'.
APPEND value TO list.
CLEAR value.
value-key = '13'.
value-text = 'Lock Object'.
APPEND value TO list.
CALL FUNCTION 'VRM_SET_VALUES'
    EXPORTING
      id              = name
      values          = list
    EXCEPTIONS
      id_illegal_name = 1
      OTHERS          = 2.
IF sy-subrc <> 0.
    MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
            WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.

How to place multiple list box in Module Pool Program having same option.

I have a screen. I want to place multiple i/o box with listbox option having 10 option of each . Is it possible ?

Hi Manoj,
Sorry, did not got you. You mean list box with 10 options, just this?
Or Cascading list box?
regards,
Archer

I have a problem with mail. the spelling and grammer check box before sending the messege is no longer there. I did everything but cannot get it back. is ther anyone who knows how to get the box with spelling and grammer checks before sending

i have a problem with mail. the spelling and grammer check box before sending the messege is no longer there. I did everything but cannot get it back. is ther anyone who knows how to get the box with spelling and grammer checks before sending the mail.
Also the mail is acting very funny by not getting the rules work in a proper method. Is ther a software to repair mail.

i did both of them, but still the while sending the mail the diolog box is not showing up and also the spelling and grammer does not do the spelling check.
This problem just started for about 3 to 4 days now. earlier it was working normally.

How to print the list outout with out getting output?

How to print the list outout with out getting output?
My requirement is that when i exicute the program the list output has to print with out getting output list display on the screen.
if possible cana anyone share the code....
Phani,

See this Sample Program.
DATA: PARAMS LIKE PRI_PARAMS,
      DAYS(1) TYPE N VALUE 2,
      COUNT(3) TYPE N VALUE 1,
      VALID    TYPE C.
CALL FUNCTION 'GET_PRINT_PARAMETERS'
EXPORTING DESTINATION           = 'LT50'
            COPIES                = COUNT
            LIST_NAME             = 'TEST'
            LIST_TEXT             = 'SUBMIT ... TO SAP-SPOOL'
            IMMEDIATELY           = 'X'
            RELEASE               = 'X'
            NEW_LIST_ID           = 'X'
            EXPIRATION            = DAYS
            LINE_SIZE             = 79
            LINE_COUNT            = 23
            LAYOUT                = 'X_PAPER'
            SAP_COVER_PAGE        = 'X'
            COVER_PAGE            = 'X'
            RECEIVER              = 'SAP*'
            DEPARTMENT            = 'System'
            NO_DIALOG             = ' '
IMPORTING OUT_PARAMETERS        = PARAMS
            VALID                 = VALID.
IF VALID <> SPACE.
SUBMIT RSTEST00 TO SAP-SPOOL
    SPOOL PARAMETERS PARAMS
    WITHOUT SPOOL DYNPRO.
ENDIF.
Awrd POints If useful
Bhupal

Reg:- How-to build dependent lists boxes with ADF and Faces(Frank.Nimphius)

Similar Messages

Maybe you are looking for