Reg: Long Running BTC work process

Hi Expert,
              Yesterday and today i check SAPMMC only one background work process still  running (48 hours), How to analyse  and why running for long time please explain for me.  SM50  in transaction code also stilll one btc workprocess running.
BTC 3196 RUN     YES     48:11:32     156101     SAPLTHFB,
                                                                        SAPLSKTM,
                                                                        SAPLOLEA,
                                                                        SAPMSSYD 001     BASIS
Please give solution i will give reward points..
Thanks,
Selva

see if this is helpfull
http://forums.sdn.sap.com/thread.jspa?threadID=1406031

Similar Messages

  • Long Running dialog work process in production ststem

    Dear Friends,
                              IIn our production system one dialog work process is running more then 5 days. i can not terminate or cancel the process.'
    I tried all the ways to cancel the work process. i restart the system (offline backup) but still that work process are showing running status....
    Kindly advice....
    Thanks & Regards,
    Sundar.C

    IIn our production system one dialog work process is running more then 5 days. i can not terminate or cancel the process.'
    I tried all the ways to cancel the work process. i restart the system (offline backup) but still that work process are showing running status....
    Maximum runtime of dialog work process is controlled by parameter rdisp/max_wprun_time  I am not sure how it is possible to have dialog work process running for so many days. Secondly, when you restart the system means new PIDs will be allocated and it will be not the same dialog work process. Check SM50, trace information for more details and clues.

  • Long Running BTC process in SAP R3 PROD system

    Hello All,
    In our PRD. env ..one BTC job running since long time with out collecting any data .
    when looked into job log and its associated BTC work process its status is active and the action performed is Sequential read to the table RESB .And this job current duration time 100000 + .
    Few Points which are observed 1>When I looked into expensive SQL statement , I can see the table RESB most of the times and below is the screen which I observed over there
    SQL Statement
    SELECT
      "XLOEK" , "MATNR" , "WERKS" , "AUFNR" , "POSTP"
    FROM
      "RESB"
    WHERE
      "MANDT" = :A0 AND "AUFNR" IN ( :A1 , :A2 , :A3 , :A4 , :A5 ) AND "POSTP" IN ( :A6 , :A7 , :A
      :A9 )#
    Execution Plan
    Explain from v$sql_plan: Address: 07000000CE24FD58 Hash_value:  940166482 Child_number:  1
    SELECT STATEMENT ( Estimated Costs = 29,530 , Estimated #Rows = 0 )
            1 TABLE ACCESS FULL RESB
              ( Estim. Costs = 29,529 , Estim. #Rows = 75 )
              Estim. CPU-Costs = 2,848,540,469 Estim. IO-Costs = 29,284
    2>If we look into the statement it mentions as TABLE ACCESS FULL RESB , what does this mean ?
    3>Normally the previous execution of these jobs on average is 1500 seconds .
    4>This job is relating to BW , which collects data from R3 remotely and sends report for BW system .
    Can any one suggest me to fix this issue. as this is causing performance issues to the system .
    Best Regards
    Rakesh

    Hi Rakesh,
    This job got hung. You need to cancel it. If job get hung repeatedly, then analyze the table RESB.
    TABLE ACCESS FULL RESB means process unable to connect RESB. If analyze not work, the run total DB stat . Still you face problem the make RESB table buffering (SE13).
    Check TRFC, QRFC no of entry. If it is huge, it can be problem. Send data part by part. Send data in week end not week days.
    Thanks,
    Suman

  • How to Handle Long running alerts in process chain...Urgent!!!

    Hi All,
    I am trying to find ways for handling long running alerts in process chains.
    I need to be sending out mails if the processes are running for longer than a threshold value.
    I did check this post:
    Re: email notification in process chain
    Appreciate if anyone can forward the code from this post or suggest me other ways of handling these long running alerts.
    My email id is [email protected]
    Thanks and Regards
    Pavana.

    Hi Ravi,
    Thanks for your reply. I do know that i will need a custom program.
    I need to be sending out mails when there is a failure and also when process are running longer than a threshold.
    Please do forward any code you have for such a custom program.
    Expecting some help from the ever giving SDN forum.
    Thanks and Regards
    Pavana
    Message was edited by:
            pav ana

  • Query on long running client import process

    Hi Gurus,
    I have few queries regarding the parameter PHYS_MEMSIZE. Let me brief about the SAP server configuration before I get into the actual problem.
    We are running on ECC 6.0 on windows 2003, SP2 - 64 bit and DB is SQL 2005 with 16GB RAM and page file configured 22 GB.
    As per the Zero Administration Memory management I have learnt as a rule of thumb, use SAP/DB = 70/30 and set the parameter PHYS_MEMSIZE to approximately 70% of the installed main memory. Please suggest should I change the parameter as described in zero administration memory guide? If so what are the precautions we should take care for changing memory parameters. Are there any major dependencies and known issues associated to this parameter?
    Current PHYS_MEMSIZE parameter set to 512 MB.
    Few days ago we had to perform the client copy using EXPORT / IMPORT method. Export process was normal and went well However the import process took almost 15 HRs to complete. Any clues what could be the possible reasons for long running client copy activity in SQL environment. I am suspecting the parameter PHY_MEMSIZE was configured to 512 MB which appears to be very low.
    Please share your ideas and suggestions on this incase if anyone have ever experienced this sort of issue because we are going to perform a client copy again in next 10 days so i really need your inputs on this.
    Thanks & Regards,
    Vinod
    Edited by: vinod kumar on Dec 5, 2009 9:24 AM

    Hi Nagendra,
    Thanks for your quick response.
    Our production environment is running on ACtive/Active clustering like One central Instance and Dialog Instance. Database size is 116 GB with 1 data file and log file is 4.5 Gb which are shared in cluster.
    As suggested by you if I need to modify the PHYS_MEMSIZE to 11 or 12 GB(70% of physical RAM). What are the precautions should I consider and I see there are many dependencies associated with this parameter as per the documentation of this parameter.
    The standard values of the following parameters are calculated
    According to PHYS_MEMSIZE
    em/initial_size_MB = PHYS_MEMSIZE (extension by PHYS_MEMSIZE / 2)
    rdisp/ROLL_SHM
    rdisp/ROLL_MAXFS
    rdisp/PG_SHM
    rdisp/PG_MAXFS
    Should I make the changes to both Central and dialog instance as well. Please clarify me,. Also are there any other parameters should i enhance or adjust to speedup the client copy process.
    Many Thanks...
    Thanks & Regards,
    Vinod

  • What are the Minimum Number of Dia or BTC Work Process should be Configured

    Hi All,
    Can any One Let me Know why We need to Have 2 Minimum Dialog Work Process and not 1 or 3.
    What are the Task does this 2 Minimum work process handles in CI.
    Thanks & Regards
    Dan

    You need more than on if the system needs e. g. generate a program, this is done asynchronously, one process "waits" while a second generates a program. This is the absolute minimum, if you have only 1, you will stuck at the first time, the system needs to generate.
    Markus

  • Distubution of BDLS  run  between work process

    Hi all,
    We have the R/3  4.6c with 4.2 TB and BW  7.0 with 7.4 TB , during the refresh from   prod to quality  the BDLS steps takes  nealry 24 to 40 hrs . We have break down the tables  and kicking off mutliple BDLS jobs  like Z * tables  in BDLS run and  other set of tables in another run  so that these jobs will run parallel . During this BDLS conversion  only one  background process
    is running  for one BDLS run  is there any way to make the load distubution among available background process to so that the conversion will complete sooner.
      For example : In  R/3 i have trigger one BDLS run for CATSDB  table  in background  this will  occupy only one background process, how can we make to use of available all background process to run  for CATSDB so that conversion will be completed soon .
    Please suggest..
    Thanks,
    Subhash.G

    There is nothing wrong is running BDLS jobs in parallel. We were facing a similar situation in a project a few years back and then I had devised a solution after taking inputs from various sources and usage of parallel processing was one of steps of achieving BDLS faster. Parallel processing is not an issue at all. However parallel processing needs to be done smartly. Bigger tables ought to be excluded and for them dedicated processes can be used. For the rest you can tables for bracket them like A* to D* ,E* to F* and so on  making sure you are exclusing the larger tables. However usage of temporary indexes for big tables where not all the fields need to be filled in can be helpful. The index needs to include the field for logical system .No point in creating temporary indexes for tables where the logical system field is always full since anyways a complete table scan would be performed. Create indexes for 6-7 largest tablest of this kind. Of course increase thnumber of background processes as well temporarily.
    Regards.
    Ruchit.

  • Reg: Long running SAP job SAP_XMB_PERF_AGGREGATE

    Hello,
    Above mentioned SAP job is running for days. I tried with changing parameters In integration engine administration SXMB_ADM for Category PERF there is a paramter DAYS_TO_KEEP_DATA.
    Created the Index too in Table SXMSPFAGG. But still the job is taking very long time.
    could any one faced same kind of issue and fixed with different solutions, pls
    FYI - My system -- SAP XI 3.1 SPS23.
    Thanks
    Vivekanandan

    Hi
    Check this link
    http://help.sap.com/saphelp_nw04/helpdata/en/8b/08b140cbe49d2ae10000000a155106/frameset.htm
    http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/58c5f542-0801-0010-228b-c27a7b3c2752?quicklink=index&overridelayout=true    (Check 48th page onwards).
    Regards
    Ramesh

  • BTC work process status is in Sleep

    Hi All,
    In BW system one background job is running from long time usually it will take 100s and less than that.Now that BGD is running from long time and now that wp is stopped and in sleep condition.In the job log and sm12 I can find some lock entries.What is the problem and how in this run it is taking much time?
    Regards,
    AR nath.

    Hi,
    I checked that that is not the actual problem.
    Regards,
    Nath.

  • Web.Show_Document does not work with long running reports

    I am using Web.Show_Document() to call reports from Forms. Everything works fine for smaller reports. However for long running reports I do not get the output instead get the page "This page cannot be displayed.". On checking the job status on the report server I find that report is still running and completes after some time but by that time my http request has already timed out. What configuration do I have to change to make my long running reports work.
    Thanks

    So, looks like this is an IE issue. I need to add the form server site to my list of Trusted Sites. Once I did that, everything started to work fine. Thought I'd share in case anyone is really interested.....

  • WIJ 20002 error on long running reports

    When trying to run a long running report, an error message is received .
    Quote:
    *"The Web Intelligence Java Report Panel cannot connect to the server. Close
    the report panel and try to connect again or see your BusinessObjects
    administrator. (Error: WIJ 20002)"*
    What happens next is you are advised to "close" (twice) and are then advised to close this window.
    If you select Details on the first error message:
    Server: https://test.i3access.iowa.gov:443/desktoplaunch/InfoView/CrystalEnterprise_Webi/cdzServlet?
    java.lang.RuntimeException: java.io.IOException: Server returned HTTP response code: 502 for URL: https://test.i3access.iowa.gov:443/desktoplaunch/InfoView/CrystalEnterprise_Webi/cdzServlet
         at sun.net.www.protocol.http.HttpURLConnection.getInputStream(Unknown Source)
         at sun.net.www.protocol.https.HttpsURLConnectionImpl.getInputStream(Unknown Source)
         at com.businessobjects.wp.cpi.CPIConnection.postRequest(CPIConnection.java:437)
         at com.businessobjects.wp.xml.XMLViaHttp.loadScript(XMLViaHttp.java:144)
         at com.businessobjects.wp.xml.XMLViaHttp.getPromptList(XMLViaHttp.java:1284)
         at com.businessobjects.wp.xml.XMLLoader.getPromptList(XMLLoader.java:279)
         at com.businessobjects.wp.om.OMQuery.loadPromptsAndContexts(OMQuery.java:359)
         at com.businessobjects.wp.om.OMQuery.getActiveContextCount(OMQuery.java:384)
         at com.businessobjects.wp.tc.query.TCQueryPropertie.buildQueryContextFromUI(TCQueryPropertie.java:496)
         at com.businessobjects.wp.tc.query.TCQueryTab.buildQueryContextFromUI(TCQueryTab.java:846)
         at com.businessobjects.wp.tc.query.TCQueryTab.modifyQueryProperties(TCQueryTab.java:638)
         at com.businessobjects.wp.tc.query.TCQueryTabManager.modifyQueryTabs(TCQueryTabManager.java:306)
         at com.businessobjects.wp.tc.query.TCQueryPanel.modifyQueryTabs(TCQueryPanel.java:310)
         at com.businessobjects.wp.tc.query.TCQueryPanel.load(TCQueryPanel.java:383)
         at com.businessobjects.wp.tc.TCMainPanel.switchToQueryPanel(TCMainPanel.java:563)
         at com.businessobjects.wp.tc.TCMainPanel.actionPerformed(TCMainPanel.java:506)
         at javax.swing.AbstractButton.fireActionPerformed(Unknown Source)
         at javax.swing.AbstractButton$Handler.actionPerformed(Unknown Source)
         at javax.swing.DefaultButtonModel.fireActionPerformed(Unknown Source)
         at javax.swing.DefaultButtonModel.setPressed(Unknown Source)
         at javax.swing.plaf.basic.BasicButtonListener.mouseReleased(Unknown Source)
         at com.jidesoft.plaf.basic.BasicJideButtonListener.mouseReleased(Unknown Source)
         at java.awt.AWTEventMulticaster.mouseReleased(Unknown Source)
         at java.awt.Component.processMouseEvent(Unknown Source)
         at javax.swing.JComponent.processMouseEvent(Unknown Source)
         at java.awt.Component.processEvent(Unknown Source)
         at java.awt.Container.processEvent(Unknown Source)
         at java.awt.Component.dispatchEventImpl(Unknown Source)
         at java.awt.Container.dispatchEventImpl(Unknown Source)
         at java.awt.Component.dispatchEvent(Unknown Source)
         at java.awt.LightweightDispatcher.retargetMouseEvent(Unknown Source)
         at java.awt.LightweightDispatcher.processMouseEvent(Unknown Source)
         at java.awt.LightweightDispatcher.dispatchEvent(Unknown Source)
         at java.awt.Container.dispatchEventImpl(Unknown Source)
         at java.awt.Component.dispatchEvent(Unknown Source)
         at java.awt.EventQueue.dispatchEvent(Unknown Source)
         at java.awt.EventDispatchThread.pumpOneEventForFilters(Unknown Source)
         at java.awt.EventDispatchThread.pumpEventsForFilter(Unknown Source)
         at java.awt.EventDispatchThread.pumpEventsForHierarchy(Unknown Source)
         at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
         at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
         at java.awt.EventDispatchThread.run(Unknown Source)
         at com.businessobjects.wp.cpi.CPIConnection.postRequest(CPIConnection.java:441)
         at com.businessobjects.wp.xml.XMLViaHttp.loadScript(XMLViaHttp.java:144)
         at com.businessobjects.wp.xml.XMLViaHttp.getPromptList(XMLViaHttp.java:1284)
         at com.businessobjects.wp.xml.XMLLoader.getPromptList(XMLLoader.java:279)
         at com.businessobjects.wp.om.OMQuery.loadPromptsAndContexts(OMQuery.java:359)
         at com.businessobjects.wp.om.OMQuery.getActiveContextCount(OMQuery.java:384)
         at com.businessobjects.wp.tc.query.TCQueryPropertie.buildQueryContextFromUI(TCQueryPropertie.java:496)
         at com.businessobjects.wp.tc.query.TCQueryTab.buildQueryContextFromUI(TCQueryTab.java:846)
         at com.businessobjects.wp.tc.query.TCQueryTab.modifyQueryProperties(TCQueryTab.java:638)
         at com.businessobjects.wp.tc.query.TCQueryTabManager.modifyQueryTabs(TCQueryTabManager.java:306)
         at com.businessobjects.wp.tc.query.TCQueryPanel.modifyQueryTabs(TCQueryPanel.java:310)
         at com.businessobjects.wp.tc.query.TCQueryPanel.load(TCQueryPanel.java:383)
         at com.businessobjects.wp.tc.TCMainPanel.switchToQueryPanel(TCMainPanel.java:563)
         at com.businessobjects.wp.tc.TCMainPanel.actionPerformed(TCMainPanel.java:506)
         at javax.swing.AbstractButton.fireActionPerformed(Unknown Source)
         at javax.swing.AbstractButton$Handler.actionPerformed(Unknown Source)
         at javax.swing.DefaultButtonModel.fireActionPerformed(Unknown Source)
         at javax.swing.DefaultButtonModel.setPressed(Unknown Source)
         at javax.swing.plaf.basic.BasicButtonListener.mouseReleased(Unknown Source)
         at com.jidesoft.plaf.basic.BasicJideButtonListener.mouseReleased(Unknown Source)
         at java.awt.AWTEventMulticaster.mouseReleased(Unknown Source)
         at java.awt.Component.processMouseEvent(Unknown Source)
         at javax.swing.JComponent.processMouseEvent(Unknown Source)
         at java.awt.Component.processEvent(Unknown Source)
         at java.awt.Container.processEvent(Unknown Source)
         at java.awt.Component.dispatchEventImpl(Unknown Source)
         at java.awt.Container.dispatchEventImpl(Unknown Source)
         at java.awt.Component.dispatchEvent(Unknown Source)
         at java.awt.LightweightDispatcher.retargetMouseEvent(Unknown Source)
         at java.awt.LightweightDispatcher.processMouseEvent(Unknown Source)
         at java.awt.LightweightDispatcher.dispatchEvent(Unknown Source)
         at java.awt.Container.dispatchEventImpl(Unknown Source)
         at java.awt.Component.dispatchEvent(Unknown Source)
         at java.awt.EventQueue.dispatchEvent(Unknown Source)
         at java.awt.EventDispatchThread.pumpOneEventForFilters(Unknown Source)
         at java.awt.EventDispatchThread.pumpEventsForFilter(Unknown Source)
         at java.awt.EventDispatchThread.pumpEventsForHierarchy(Unknown Source)
         at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
         at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
         at java.awt.EventDispatchThread.run(Unknown Source)
    Please let me know what the solution is.

    Matt,
    A namesake of yours is my client for this issue.
    Coming to the problem, the customer says there is proxy configured between HTTP server and WebSphere. This proxy server times out for long running reports. If the HTTPServer is bypassed, things work fine.
    A colleague of mine opened a case with BOBJ. I can get you the case# if you need it. We got this reply:
    From: Takano, Hitomi
    Sent: Tuesday, November 04, 2008 10:26 AM
    Hi Matt,
    I was away for the last two days, so I couldn't reply to you sooner.
    Extending the timeout setting from Webi and Infoview in BOXI R2 will not
    make the long running reports work as your proxy setting at the lower
    layer than BOXI just allows 5 minutes and after that the connection will
    be cancelled by the proxy. I'm not sure why this setting was effective
    for https only or timeout out after 2 min. This is out of scope of BOXI
    R2 and your network admin would be the best person to handle. You were
    getting 502 error in Java Report Panel. I googled with "502 error and
    ProxyTimeout", and I got the some articles returned which say  when
    backend doesn't answer on requests(because it timed out), it returns to
    a client an error 502.
    I'll close this thread as the n/w admin at the client are working things out.
    Thanks for your support.

  • Work process in running status from Long time

    Hi all,
    In my production system Workprocess is in runnig staus almost from 44 hours.
    i tried to end session of user but it not ending.
    i tried  to kill work process from sm50  end work process and from os(unix) kill -9 pid every thing i tried but work process is in still running
    please give some ideas to clear this
    Thanks,
    Shashi
    Edited by: shashikiran.ss on Oct 11, 2010 1:23 PM

    Hi Juan,
    yes from sm50 i have done cancel without core. no jobs are running or sheduled with that user. but work process status is in running with  program  J_1IREGS no action is taking place. 
    Restarting box  not possible right now.
    Regards
    Shashi

  • SAP work Process goes in run state,Users cannot login developer trace paste

    Hi team,
    We have a system which is at ECC6 release 701 ABAP + java system.
    The work process frequently go in run state and since this is an IDES system, I always restart the system.
    Please help me since i want tio know the root cause for the same.
    The dev trace is as follows, and i beleive its a listener problem by the logs.
    kernel runs with dp version 244000(ext=110000) (@(#) DPLIB-INT-VERSION-244000-UC)
    length of sys_adm_ext is 576 bytes
    SWITCH TRC-HIDE on ***
    ***LOG Q00=> DpSapEnvInit, DPStart (00 199004) [dpxxdisp.c   1287]
         shared lib "dw_xml.dll" version 254 successfully loaded
         shared lib "dw_xtc.dll" version 254 successfully loaded
         shared lib "dw_stl.dll" version 254 successfully loaded
         shared lib "dw_gui.dll" version 254 successfully loaded
         shared lib "dw_mdm.dll" version 254 successfully loaded
    rdisp/softcancel_sequence :  -> 0,5,-1
    use internal message server connection to port 3900
    Mon Dec 13 08:26:23 2010
    WARNING => DpNetCheck: NiHostToAddr(www.doesnotexist0223.qqq.nxst) took 6 seconds
    <EsNT> Using memory model view.
    <EsNT> Memory Reset disabled as NT default
    <ES> 127 blocks reserved for free list.
    ES initialized.
    mm.dump: set maximum dump mem to 96 MB
    Mon Dec 13 08:26:29 2010
    J2EE server info
      start = TRUE
      state = STARTED
      pid = 200040
      argv[0] = D:\usr\sap\BI7\DVEBMGS00\exe\jcontrol.EXE
      argv[1] = D:\usr\sap\BI7\DVEBMGS00\exe\jcontrol.EXE
      argv[2] = pf=D:\usr\sap\BI7\SYS\profile\BI7_DVEBMGS00_q4de3gsy203
      argv[3] = -DSAPSTART=1
      argv[4] = -DCONNECT_PORT=65000
      argv[5] = -DSAPSYSTEM=00
      argv[6] = -DSAPSYSTEMNAME=BI7
      argv[7] = -DSAPMYNAME=q4de3gsy203_BI7_00
      argv[8] = -DSAPPROFILE=D:\usr\sap\BI7\SYS\profile\BI7_DVEBMGS00_q4de3gsy203
      argv[9] = -DFRFC_FALLBACK=ON
      argv[10] = -DFRFC_FALLBACK_HOST=localhost
      start_lazy = 0
      start_control = SAP J2EE startup framework
    DpJ2eeStart: j2ee state = STARTED
    rdisp/http_min_wait_dia_wp : 1 -> 1
    ***LOG CPS=> DpLoopInit, ICU ( 3.0 3.0 4.0.1) [dpxxdisp.c   1694]
    ***LOG Q0K=> DpMsAttach, mscon ( q4de3gsy203) [dpxxdisp.c   12697]
    DpStartStopMsg: send start message (myname is >q4de3gsy203_BI7_00                      <)
    DpStartStopMsg: start msg sent
    CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
    CCMS: start to initalize 3.X shared alert area (first segment).
    DpMsgAdmin: Set release to 7000, patchlevel 0
    MBUF state PREPARED
    MBUF component UP
    DpMBufHwIdSet: set Hardware-ID
    ***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c   1050]
    DpMsgAdmin: Set patchno for this platform to 254
    Release check o.K.
    DpJ2eeLogin: j2ee state = CONNECTED
    Mon Dec 13 08:27:09 2010
    my types changed after wp death/restart 0xbf --> 0xbd
    my types changed after wp death/restart 0xbd --> 0xb5
    my types changed after wp death/restart 0xb5 --> 0x95
    Mon Dec 13 08:27:29 2010
    ERROR => DpWPCheck: W1 (pid 199044) died (severity=0, status=0) [dpxxdisp.c   15841]
    ERROR => DpWPCheck: W4 (pid 199912) died (severity=0, status=0) [dpxxdisp.c   15841]
    ERROR => DpWPCheck: W6 (pid 192420) died (severity=0, status=0) [dpxxdisp.c   15841]
    ERROR => DpWPCheck: W8 (pid 199528) died (severity=0, status=0) [dpxxdisp.c   15841]
    ERROR => DpWPCheck: W9 (pid 198860) died (severity=0, status=0) [dpxxdisp.c   15841]
    ERROR => DpWPCheck: W10 (pid 199664) died (severity=0, status=0) [dpxxdisp.c   15841]
    my types changed after wp death/restart 0x95 --> 0x85
    ERROR => DpWPCheck: W12 (pid 200036) died (severity=0, status=0) [dpxxdisp.c   15841]
    Mon Dec 13 08:27:43 2010
    ***LOG Q0I=> NiIRead: recv (10054: WSAECONNRESET: Connection reset by peer) [nixxi.cpp 4424]
    ERROR => NiIRead: SiRecv failed for hdl 6 / sock 316
        (SI_ECONN_BROKEN/10054; I4; ST; 127.0.0.1:4882) [nixxi.cpp    4424]
    ERROR => DpJ2eeMsgProcess: NiRead failed (NIECONN_BROKEN) [dpxxj2ee.c   1212]
    DpJ2eeMsgProcess: j2ee state = CONNECTED (NIECONN_BROKEN)
    Mon Dec 13 08:27:49 2010
    ERROR => DpWPCheck: W0 (pid 200632) died (severity=0, status=0) [dpxxdisp.c   15841]
    ERROR => DpWPCheck: W1 (pid 199044) died (severity=0, status=0) [dpxxdisp.c   15841]
    my types changed after wp death/restart 0x85 --> 0x84
    ERROR => DpWPCheck: W3 (pid 93796) died (severity=0, status=0) [dpxxdisp.c   15841]
    ERROR => DpWPCheck: W4 (pid 199912) died (severity=0, status=0) [dpxxdisp.c   15841]
    ERROR => DpWPCheck: W5 (pid 200484) died (severity=0, status=0) [dpxxdisp.c   15841]
    ERROR => DpWPCheck: W6 (pid 192420) died (severity=0, status=0) [dpxxdisp.c   15841]
    my types changed after wp death/restart 0x84 --> 0x80
    ERROR => DpWPCheck: W8 (pid 199528) died (severity=0, status=0) [dpxxdisp.c   15841]
    ERROR => DpWPCheck: W9 (pid 198860) died (severity=0, status=0) [dpxxdisp.c   15841]
    ERROR => DpWPCheck: W10 (pid 199664) died (severity=0, status=0) [dpxxdisp.c   15841]
    ERROR => DpWPCheck: W11 (pid 199720) died (severity=0, status=0) [dpxxdisp.c   15841]
    ERROR => DpWPCheck: W12 (pid 200036) died (severity=0, status=0) [dpxxdisp.c   15841]
    DP_FATAL_ERROR => DpWPCheck: no more work processes
    DISPATCHER EMERGENCY SHUTDOWN ***
    increase tracelevel of WPs
    NiWait: sleep (10000ms) ...
    NiISelect: timeout 10000ms
    NiISelect: maximum fd=493
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    Mon Dec 13 08:27:59 2010
    NiISelect: TIMEOUT occured (10000ms)
    dump system status
    Workprocess Table (long)               Mon Dec 13 07:27:59 2010
    ========================
    No Ty. Pid      Status  Cause Start Err Sem CPU    Time  Program          Cl  User         Action                    Table
    0 DIA   200632 Ended         no      2   0        0                                                                         
    1 DIA   199044 Ended         no      3   0        0                                                                         
    2 DIA   200280 Ended         no      1   0        0                                                                         
    3 DIA    93796 Ended         no      2   0        0                                                                         
    4 DIA   199912 Ended         no      3   0        0                                                                         
    5 DIA   200484 Ended         no      2   0        0                                                                         
    6 UPD   192420 Ended         no      3   0        0                                                                         
    7 ENQ   199792 Ended         no      1   0        0                                                                         
    8 BTC   199528 Ended         no      3   0        0                                                                         
    9 BTC   198860 Ended         no      3   0        0                                                                         
    10 BTC   199664 Ended         no      3   0        0                                                                         
    11 SPO   199720 Ended         no      2   0        0                                                                         
    12 UP2   200036 Ended         no      3   0        0                                                                         
    Dispatcher Queue Statistics               Mon Dec 13 07:27:59 2010
    Switch off Shared memory profiling
    ShmProtect( 57, 3 )
    ShmProtect(SHM_PROFILE, SHM_PROT_RW
    ShmProtect( 57, 1 )
    ShmProtect(SHM_PROFILE, SHM_PROT_RD
    DpWakeUpWps: wake up all wp's
    Stop work processes
    Stop gateway
    killing process (184860) (SOFT_KILL)
    Stop icman
    killing process (190124) (SOFT_KILL)
    Terminate gui connections
    wait for end of work processes
    wait for end of gateway
    [DpProcDied] Process lives  (PID:184860  HANDLE:440)
    waiting for termination of gateway ...
    NiWait: sleep (1000ms) ...
    NiISelect: timeout 1000ms
    NiISelect: maximum fd=493
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    Mon Dec 13 08:28:05 2010
    NiISelect: TIMEOUT occured (1000ms)
    [DpProcDied] Process died  (PID:184860  HANDLE:440)
    wait for end of icman
    [DpProcDied] Process lives  (PID:190124  HANDLE:448)
    waiting for termination of icman ...
    NiWait: sleep (1000ms) ...
    NiISelect: timeout 1000ms
    NiISelect: maximum fd=493
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    Mon Dec 13 08:28:06 2010
    NiISelect: TIMEOUT occured (1000ms)
    [DpProcDied] Process lives  (PID:190124  HANDLE:448)
    waiting for termination of icman ...
    NiWait: sleep (1000ms) ...
    NiISelect: timeout 1000ms
    NiISelect: maximum fd=493
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    Mon Dec 13 08:28:07 2010
    NiISelect: TIMEOUT occured (1000ms)
    [DpProcDied] Process lives  (PID:190124  HANDLE:448)
    waiting for termination of icman ...
    NiWait: sleep (1000ms) ...
    NiISelect: timeout 1000ms
    NiISelect: maximum fd=493
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    Mon Dec 13 08:28:08 2010
    NiISelect: TIMEOUT occured (1000ms)
    [DpProcDied] Process lives  (PID:190124  HANDLE:448)
    waiting for termination of icman ...
    NiWait: sleep (1000ms) ...
    NiISelect: timeout 1000ms
    NiISelect: maximum fd=493
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    Mon Dec 13 08:28:09 2010
    NiISelect: TIMEOUT occured (1000ms)
    [DpProcDied] Process died  (PID:190124  HANDLE:448)
    [DpProcDied] Process died  (PID:200040  HANDLE:424)
    DpStartStopMsg: send stop message (myname is >q4de3gsy203_BI7_00                      <)
    AdGetSelfIdentRecord: >                                                                           <
    AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
    AdCvtRecToExt: opcode 4 (AD_STARTSTOP), ser 0, ex 0, errno 0
    DpConvertRequest: net size = 189 bytes
    NiBufSend starting
    NiIWrite: hdl 3 sent data (wrt=562,pac=1,MESG_IO)
    MsINiWrite: sent 562 bytes
    send msg (len 110+452) to name                    -, type 4, key -
    DpStartStopMsg: stop msg sent
    NiIRead: hdl 3 received data (rcd=274,pac=1,MESG_IO)
    server
    NiIRead: hdl 3 recv would block (errno=EAGAIN)
    NiIRead: read for hdl 3 timed out (0ms)
    DpHalt: no more messages from the message server
    DpHalt: send keepalive to synchronize with the message server
    NiBufReceive starting
    MsINiRead: received 114 bytes
    MSG received, len 110+4, flag 3, from MSG_SERVER          , typ 0, key -
    Received 4 bytes from MSG_SERVER                             
    Received opcode MS_NOOP from msg_server, reply MSOP_OK
    MsOpReceive: ok
    MsSendKeepalive : keepalive sent to message server
    NiIRead: hdl 3 recv would block (errno=EAGAIN)
    Mon Dec 13 08:28:10 2010
    NiIPeek: peek for hdl 3 timed out (r; 1000ms)
    NiIRead: read for hdl 3 timed out (1000ms)
    DpHalt: no more messages from the message server
    DpHalt: sync with message server o.k.
    detach from message server
    ***LOG Q0M=> DpMsDetach, ms_detach () [dpxxdisp.c   13043]
    NiBufSend starting
    NiIWrite: hdl 3 sent data (wrt=110,pac=1,MESG_IO)
    MsINiWrite: sent 110 bytes
    MsIDetach: send logout to msg_server
    MsIDetach: call exit function
    DpMsShutdownHook called
    NiBufISelUpdate: new MODE -- (r-) for hdl 3 in set0
    SiSelNSet: set events of sock 368 to: ---
    NiBufISelRemove: remove hdl 3 from set0
    SiSelNRemove: removed sock 368 (pos=3)
    SiSelNRemove: removed sock 368
    NiSelIRemove: removed hdl 3
    MBUF state OFF
    AdGetSelfIdentRecord: >                                                                           <
    AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
    AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
    AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
    blks_in_queue/wp_ca_blk_no/wp_max_no = 1/300/13
    LOCK WP ca_blk 1
    make DISP owner of wp_ca_blk 1
    DpSemRq: key: 2, units: 1, timeout: -1
    DpSemRel: key: 2, units: 1
    DpRqPutIntoQueue: put request into queue (reqtype 1, prio LOW, rq_id 15)
    MBUF component DOWN
    NiICloseHandle: shutdown and close hdl 3 / sock 368
    NiBufIClose: clear extension for hdl 3
    MsIDetach: detach MS-system
    cleanup EM
    EsCleanup ....
    EmCleanup() -> 0
    Es2Cleanup: Cleanup ES2
    ***LOG Q05=> DpHalt, DPStop ( 199004) [dpxxdisp.c   11230]
    Good Bye .....
    Please revert if you need more information.
    Regards,
    Prasad Shetty

    HI Juan,
    trace file for dev_w0 as asked
    C  Starting user session: OCISessionBegin(con_hdl=0, usr=SAPSR3/<pwd>, svchp=0000000013FB7748, srvhp=0000000013FB9B78, usrhp=0000000013EA1EC8)
    C  Now 'SAPSR3/<pwd>@BI7' is connected: con_hdl=0, nls_hdl=0, session_id=65.
    C  Database NLS settings: AMERICAN_AMERICA.UTF8
    C  DB instance BI7 is running on Q4DE3GSY203 with ORACLE version 10.2.0.2.0 since DEC 13, 2010, 08:38:55
    B  Connection 0 opened (DBSL handle 0)
    B  Wp  Hdl ConName                        ConId     ConState     TX  HC  PRM RCT FRC TIM MAX OPT Date     Time   DBHost                       
    B  000 000 R/3                            000000000 ACTIVE       NO  NO  YES NO  NO  000 255 255 20101213 083926 Q4DE3GSY203                  
    C  build_stmt: reallocating stmt buffer: 256 -> 2000 characters
    M  db_connect o.k.
    M  ICT: exclude compression: .zip,.cs,.rar,.arj,.z,.gz,.tar,.lzh,.cab,.hqx,.ace,.jar,.ear,.war,.css,.pdf,.js,.gzip,.uue,.bz2,.iso,.sda,.sar,.gif,*.png
    I 
    I Mon Dec 13 08:40:14 2010
    I  MtxInit: 0 0 0
    M  SHM_PRES_BUF               (addr: 0000000015860050, size: 4400000)
    M  SHM_ROLL_AREA          (addr: 000007FFEA010050, size: 61440000)
    M  SHM_PAGING_AREA          (addr: 0000000015CA0050, size: 32768000)
    M  SHM_ROLL_ADM               (addr: 0000000017BF0050, size: 633840)
    M  SHM_PAGING_ADM          (addr: 0000000017C90050, size: 525344)
    M  ThCreateNoBuffer          allocated 544152 bytes for 1000 entries at 0000000017D20050
    M  ThCreateNoBuffer          index size: 3000 elems
    M  ThCreateVBAdm          allocated 12176 bytes (50 server) at 000000000B490050
    X  EmInit: MmSetImplementation( 2 ).
    X  MM global diagnostic options set: 0
    X  <ES> client 0 initializing ....
    X  Using implementation view
    X  ES initialized.
    X  mm.dump: set maximum dump mem to 96 MB
    M  Deactivate statistics hyper index locking
    B  dbntab: NTAB buffers attached
    B  dbntab: Buffer FTAB(hash header)  (addr: 0000000017E400E0, size: 584)
    B  dbntab: Buffer FTAB(anchor array) (addr: 0000000017E40330, size: 320072)
    B  dbntab: Buffer FTAB(item array)   (addr: 0000000017E8E580, size: 1280000)
    B  dbntab: Buffer FTAB(data area)    (addr: 0000000017FC6D80, size: 30720000)
    B  dbntab: Buffer IREC(hash header)  (addr: 0000000019D200E0, size: 584)
    B  dbntab: Buffer IREC(anchor array) (addr: 0000000019D20330, size: 320072)
    B  dbntab: Buffer IREC(item array)   (addr: 0000000019D6E580, size: 320000)
    B  dbntab: Buffer IREC(data area)    (addr: 0000000019DBC780, size: 6144000)
    B  dbntab: Buffer STAB(hash header)  (addr: 000000001A3A00E0, size: 584)
    B  dbntab: Buffer STAB(anchor array) (addr: 000000001A3A0330, size: 320072)
    B  dbntab: Buffer STAB(item array)   (addr: 000000001A3EE580, size: 320000)
    B  dbntab: Buffer STAB(data area)    (addr: 000000001A43C780, size: 3072000)
    B  dbntab: Buffer TTAB(hash header)  (addr: 000000001A7300E0, size: 1944)
    B  dbntab: Buffer TTAB(anchor array) (addr: 000000001A730880, size: 320072)
    B  dbntab: Buffer TTAB(item array)   (addr: 000000001A77EAD0, size: 800000)
    B  dbntab: Buffer TTAB(data area)    (addr: 000000001A841FD0, size: 5840000)
    B  db_con_shm_ini:  WP_ID = 0, WP_CNT = 13, CON_ID = -1
    B  dbstat: TABSTAT buffer attached (addr: 000000001ADE9FB0)
    B  dbtbxbuf: Buffer TABL  (addr: 000000001D7D0160, size: 30000000, end: 000000001F46C4E0)
    B  dbtbxbuf: Buffer TABLP (addr: 000000001F470160, size: 10240000, end: 000000001FE34160)
    B  dbexpbuf: Buffer EIBUF (addr: 000000001FE40170, size: 4194304, end: 0000000020240170)
    B  dbexpbuf: Buffer ESM   (addr: 0000000020250170, size: 4194304, end: 0000000020650170)
    B  dbexpbuf: Buffer CUA   (addr: 0000000020660170, size: 3072000, end: 000000002094E170)
    B  dbexpbuf: Buffer OTR   (addr: 0000000020950170, size: 4194304, end: 0000000020D50170)
    B  dbcalbuf: Buffer CALE  (addr: 0000000020D60050, size: 500000, end: 0000000020DDA170)
    M  CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
    S  *** init spool environment
    S  TSPEVJOB updates inside critical section: event_update_nocsec = 0
    S  initialize debug system
    T  Stack direction is downwards.
    T  debug control: prepare exclude for printer trace
    T  new memory block 00000000141756E0
    S  spool kernel/ddic check: Ok
    S  using table TSP02FX for frontend printing
    S  1 spool work process(es) found
    S  frontend print via spool service enabled
    S  printer list size is 150
    S  printer type list size is 50
    S  queue size (profile)   = 300
    S  hostspool list size = 3000
    S  option list size is 30
    S      intervals: query=50, rescan=1800, global=300 info=120
    S      processing queue enabled
    S  creating spool memory service RSPO-RCLOCKS at 000000002A0700D0
    S  doing lock recovery
    S  setting server cache root
    S  using server cache size 100 (prof=100)
    S  creating spool memory service RSPO-SERVERCACHE at 000000002A0704F0
    S    using messages for server info
    B  dbtran INFO (init_connection '<DEFAULT>' [ORACLE:700.08]):
    B   max_blocking_factor =   5,  max_in_blocking_factor      =   5,
    B   min_blocking_factor =   5,  min_in_blocking_factor      =   5,
    B   prefer_union_all    =   0,  prefer_join                 =   0,
    B   prefer_fix_blocking =   0,  prefer_in_itab_opt          =   1,
    B   convert AVG         =   0,  alias table FUPD            =   0,
    B   escape_as_literal   =   1,  opt GE LE to BETWEEN        =   0,
    B   select *            =0x0f,  character encoding          = STD / <none>:-,
    B   use_hints           = abap->1, dbif->0x1, upto->2147483647, rule_in->0,
    B                         rule_fae->0, concat_fae->0, concat_fae_or->0
    S 
    S Mon Dec 13 08:40:15 2010
    S  size of spec char cache entry: 297032 bytes (timeout 100 sec)
    S  size of open spool request entry: 2512 bytes
    S  immediate print option for implicitely closed spool requests is disabled
    A  **GENER Trace switched on ***
    A 
    A  -PXA--
    A  PXA INITIALIZATION
    A  PXA: Locked PXA-Semaphore.
    A  System page size: 4kb, total admin_size: 20564kb, dir_size: 20472kb.
    A  Attached to PXA (address 000007FFEDAB0050, size 300000K)
    A  abap/pxa = shared protect gen_remote
    A  PXA INITIALIZATION FINISHED
    A  -PXA--
    A 
    A  ABAP ShmAdm attached (addr=000007FF4FEEA000 leng=20955136 end=000007FF512E6000)
    A  >> Shm MMADM area (addr=000007FF50392E80 leng=247168 end=000007FF503CF400)
    A  >> Shm MMDAT area (addr=000007FF503D0000 leng=15818752 end=000007FF512E6000)
    A  RFC Destination> destination q4de3gsy203_BI7_00 host q4de3gsy203 system BI7 systnr 0 (q4de3gsy203_BI7_00)
    A  RFC Options> H=q4de3gsy203,S=00,d=2,
    A  RFC FRFC> fallback activ but this is not a central instance.
    A   
    A  RFC rfc/signon_error_log = -1
    A  RFC rfc/dump_connection_info = 0
    A  RFC rfc/dump_client_info = 0
    A  RFC rfc/cp_convert/ignore_error = 1
    A  RFC rfc/cp_convert/conversion_char = 23
    A  RFC rfc/wan_compress/threshold = 251
    A  RFC rfc/recorder_pcs not set, use defaule value: 2
    A  RFC rfc/delta_trc_level not set, use default value: 0
    A  RFC rfc/no_uuid_check not set, use default value: 0
    A  RFC rfc/bc_ignore_thcmaccp_retcode not set, use default value: 0
    A  RFC Method> initialize RemObjDriver for ABAP Objects
    M  ThrCreateShObjects          allocated 27042 bytes at 000000002A9E0050
    N 
    N Mon Dec 13 08:40:16 2010
    N  SsfSapSecin: putenv(SECUDIR=D:\usr\sap\BI7\DVEBMGS00\sec): ok
    N 
    N  =================================================
    N  === SSF INITIALIZATION:
    N  ===...SSF Security Toolkit name SAPSECULIB .
    N  ===...SSF trace level is 0 .
    N  ===...SSF library is D:\usr\sap\BI7\DVEBMGS00\exe\sapsecu.dll .
    N  ===...SSF hash algorithm is SHA1 .
    N  ===...SSF symmetric encryption algorithm is DES-CBC .
    N  ===...sucessfully completed.
    N  =================================================
    N 
    N Mon Dec 13 08:40:17 2010
    N  MskiInitLogonTicketCacheHandle: Logon Ticket cache pointer retrieved from shared memory.
    N  MskiInitLogonTicketCacheHandle: Workprocess runs with Logon Ticket cache.
    M  JrfcVmcRegisterNativesDriver o.k.
    W  =================================================
    W  === ipl_Init() called
    W    ITS Plugin: Path dw_gui
    W    ITS Plugin: Description ITS Plugin - ITS rendering DLL
    W    ITS Plugin: sizeof(SAP_UC) 2
    W    ITS Plugin: Release: 700, [7000.0.254.20050900]
    W    ITS Plugin: Int.version, [33]
    W    ITS Plugin: Feature set: [22]
    W    ===... Calling itsp_Init in external dll ===>
    W  === ipl_Init() returns 0, ITSPE_OK: OK
    W  =================================================
    N  VSI: WP init in ABAP VM completed with rc=0
    E  Profile-Parameter: enque/deque_wait_answer = FALSE
    E  Profile-Parameter: enque/sync_dequeall = 0
    E  Replication is disabled
    E  EnqCcInitialize: local lock table initialization o.k.
    E  EnqId_SuppressIpc: local EnqId initialization o.k.
    E  EnqCcInitialize: local enqueue client init o.k.
    S 
    S Mon Dec 13 08:40:19 2010
    S  found spool memory service RSPO-ACTIONS at 000000002A07A230
    A 
    A Mon Dec 13 08:40:20 2010
    A  **GENER Trace switched off ***
    M  SosICreateNewAnchorArray: sos_search_anchor_semantics = 1
    C 
    C Mon Dec 13 08:40:21 2010
    C  build_stmt: reallocating stmt buffer: 2000 -> 3002 characters
    B  table logging switched on for client '800'
    M 
    M Mon Dec 13 08:40:23 2010
    M  SecAudit(RsauShmInit): WP attached to existing shared memory.
    M  SecAudit(RsauShmInit): addr of SCSA........... = 000000000AFC0050
    M  SecAudit(RsauShmInit): addr of RSAUSHM........ = 000000000AFC07C0
    M  SecAudit(RsauShmInit): addr of RSAUSLOTINFO... = 000000000AFC0800
    M  SecAudit(RsauShmInit): addr of RSAUSLOTS...... = 000000000AFC080C
    M  rdisp/rb_cleaned_rfc = 0
    M 
    M Mon Dec 13 08:40:27 2010
    M  Deactivate ASTAT hyper index locking
    M 
    M Mon Dec 13 08:44:30 2010
    M 
    M  *****************************************************************************
    M  *
    M  *  LOCATION    SAP-Gateway on host q4de3gsy203 / sapgw00
    M  *  ERROR       program dbmrfc@sapdb not registered
    M  *
    M  *  TIME        Mon Dec 13 08:44:30 2010
    M  *  RELEASE     700
    M  *  COMPONENT   SAP-Gateway
    M  *  VERSION     2
    M  *  RC          679
    M  *  MODULE      gwr3cpic.c
    M  *  LINE        1835
    M  *  DETAIL      TP dbmrfc@sapdb not registered
    M  *  COUNTER     15
    M  *
    M  *****************************************************************************
    M 
    A  RFC 1485  CONVID 21905907
    A   * CMRC=2 DATA=0 STATUS=0 SAPRC=679 ThSAPOCMINIT
    A  RFC> ABAP Programm: SAPLSADC (Transaction: )
    A  RFC> User: RANGUPTA (Client: 001)
    A  RFC> Destination: SAPDB_DBM_DAEMON (handle: 2, , )
    A  RFC SERVER> RFC Server Session (handle: 1, 21904860, {D18C06E0-7859-F141-92A8-005056956B4B})
    A  RFC SERVER> Caller host:
    A  RFC SERVER> Caller transaction code:  (Caller Program: SAPLSADC)
    A  RFC SERVER> Called function module: DBM_CONNECT_PUR
    A  TH VERBOSE LEVEL FULL
    A  ** RABAX: end RX_GET_MESSAGE
    M 
    M Mon Dec 13 08:45:54 2010
    M 
    M  *****************************************************************************
    M  *
    M  *  LOCATION    SAP-Gateway on host q4de3gsy203 / sapgw00
    M  *  ERROR       program dbmrfc@sapdb not registered
    M  *
    M  *  TIME        Mon Dec 13 08:45:54 2010
    M  *  RELEASE     700
    M  *  COMPONENT   SAP-Gateway
    M  *  VERSION     2
    M  *  RC          679
    M  *  MODULE      gwr3cpic.c
    M  *  LINE        1835
    M  *  DETAIL      TP dbmrfc@sapdb not registered
    M  *  COUNTER     30
    M  *
    M  *****************************************************************************
    M 
    A  RFC 1485  CONVID 21998657
    A   * CMRC=2 DATA=0 STATUS=0 SAPRC=679 ThSAPOCMINIT
    A  RFC> ABAP Programm: SAPLSADC (Transaction: )
    A  RFC> User: RANGUPTA (Client: 001)
    A  RFC> Destination: SAPDB_DBM_DAEMON (handle: 2, , )
    A  RFC SERVER> RFC Server Session (handle: 1, 21997642, {038D06E0-8E49-F147-92A8-005056956B4B})
    A  RFC SERVER> Caller host:
    A  RFC SERVER> Caller transaction code:  (Caller Program: SAPLSADC)
    A  RFC SERVER> Called function module: DBM_CONNECT_PUR
    A  TH VERBOSE LEVEL FULL
    A  ** RABAX: end RX_GET_MESSAGE
    M 
    M Mon Dec 13 08:48:12 2010
    M 
    M  *****************************************************************************
    M  *
    M  *  LOCATION    SAP-Gateway on host q4de3gsy203 / sapgw00
    M  *  ERROR       program dbmrfc@sapdb not registered
    M  *
    M  *  TIME        Mon Dec 13 08:48:12 2010
    M  *  RELEASE     700
    M  *  COMPONENT   SAP-Gateway
    M  *  VERSION     2
    M  *  RC          679
    M  *  MODULE      gwr3cpic.c
    M  *  LINE        1835
    M  *  DETAIL      TP dbmrfc@sapdb not registered
    M  *  COUNTER     45
    M  *
    M  *****************************************************************************
    M 
    A  RFC 1485  CONVID 22146986
    A   * CMRC=2 DATA=0 STATUS=0 SAPRC=679 ThSAPOCMINIT
    A  RFC> ABAP Programm: SAPLSADC (Transaction: )
    A  RFC> User: RANGUPTA (Client: 001)
    A  RFC> Destination: SAPDB_DBM_DAEMON (handle: 2, , )
    A  RFC SERVER> RFC Server Session (handle: 1, 22145986, {558D06E0-45BF-F199-92A8-005056956B4B})
    A  RFC SERVER> Caller host:
    A  RFC SERVER> Caller transaction code:  (Caller Program: SAPLSADC)
    A  RFC SERVER> Called function module: DBM_CONNECT_PUR
    A  TH VERBOSE LEVEL FULL
    A  ** RABAX: end RX_GET_MESSAGE
    M 
    M Mon Dec 13 08:49:33 2010
    M 
    M  *****************************************************************************
    M  *
    M  *  LOCATION    SAP-Gateway on host q4de3gsy203 / sapgw00
    M  *  ERROR       program dbmrfc@sapdb not registered
    M  *
    M  *  TIME        Mon Dec 13 08:49:33 2010
    M  *  RELEASE     700
    M  *  COMPONENT   SAP-Gateway
    M  *  VERSION     2
    M  *  RC          679
    M  *  MODULE      gwr3cpic.c
    M  *  LINE        1835
    M  *  DETAIL      TP dbmrfc@sapdb not registered
    M  *  COUNTER     60
    M  *
    M  *****************************************************************************
    It is a bit large will this do ?
    Regards,
    Prasad

  • In forms how to cancel long running process or query in 10g

    We have application which is hosted on 10g AS. Some forms has lot of processing to be done and sometimes user wants to cancel the processing in between maybe because he wants to change some value and refire processing.
    Based on the search on net 'Esc' key was used in earlier version of forms to function as User requested Cancel operation. How can same be done in 10g. Do we have to do anything in fmrweb.res for this. Is there some setting to be done in forms or in AS for this functionality.
    Does this matter on whether JInitiator is used or JPI is used for running the application?
    Edited by: suresh_mathew on May 21, 2013 1:36 AM

    Hi,
    Exit can be used to cancel query mode i.e. in case you go into query mode by Exit you can cancel query mode. Suppose you went into query mode and you have fired query which will take some time to fetch how can I abort it.
    In earlier version of form there was 'Cancel' facility wherein if triggered it used to fire an error message 'Ora--01013 user requested cancel of current operation"
    With this facility you can abort any query which is executing or any long running process which forms is currently performing.
    fmrweb.res would have entry like
    27 : 0 : "Esc" : 1001 : "Cancel"
    The above entry I picked from OPN
    Java Function Numbers And Key Mappings For Forms Deployed Over Web [ID 66534.1]
    Unfortunately this is not working for us even if I put this in frmweb.res of 10g AS
    Basically I want ability to Abort/Cancel a long running process be it query execution or standard process triggered in the form.
    Any advise or help is highly appreciated.
    Suresh

  • ProgressIndicator and  hourglass for long running processes

    Hi all,
    Iam using Oracle ADF 10g with EJBs.
    I have a long running process for which I want to give the user an indication of its progress. The process is run upon clicking a submit button.
    I have tested the use of the combination of progressIndicator + poll according to the example of Gerger consulting( http://gergerconsulting.blogspot.com/2007/04/adf-faces-progressindicator-example-for.html) but it did not work. The problem is that my long running process hangs the page and the progress bar does not work until the process has finished.
    I have seen a similar post in this foum (Re: How to run long background jobs in ADF applications where a user complains that there is not an Oracle method for running asynchronous processes from Oracle ADF.
    I've tested to isolate my asynchronous process with the progressIndicator + poll in a single ADF page. The process is being activated from an invokeAction from the executables of the pagedef file. But again the process hangs the page and the progressIndicator does not display at all.
    So I have abandoned the idea of the progress indicator and Iam thinking of using an hourglass.
    Is there an example or guidelines of how I can do it?

    Thanks John for your reply,
    Iam still working on the progressIndicator. I have read the discussion thoroughly quite many times.
    One thing I have not yet figured out from your discussion is how you manage to create the long-running-process thread within an action method within the managed bean and make the thread still be active, while the parent action method has finished.
    Usually the managed beans attached to a .jspx pages has request scope. So a commandButton's action method (that will spawn the long running thread) will finish much earlier than the thread and it will kill the thread.
    Thanks,
    Dimitris

Maybe you are looking for