Reg:: MS-Sqlserver 2008 r2 Trace logs
Hi Techys,
I have a query regarding sql server trace logs,
I'm using SqlServer 2008 r2 version for sharepoint 2010 installation, But I'm toomuch struggled with SqlServer trace logs, due to these logs my system drive always filling and my sharepoint site is not allowing for browsing. If I delete the trace logs, the
system drive will have some free space and sharepoint site is running very smothly.
So, I want to stop my tracelogs in sqlserver. Please guide the very best solution.
Many Thanks,
Madhu
Give a command to list all traceids:
SELECT * FROM sys.fn_trace_getinfo(NULL)
for each tracing you want to disable (except for default trace which need to be configured through sp_configure) execute (here is a sample for traceid=3):
exec sp_trace_setstatus 3,0
If you need to disable a default trace, issue the commands:
EXEC sp_configure 'show advanced options', 1;
GO
RECONFIGURE;
GO
EXEC sp_configure 'default trace enabled', 0;
GO
RECONFIGURE;
GO
EXEC sp_configure 'show advanced options', 0;
GO
RECONFIGURE;
GO
Similar Messages
-
OS commands from File adapter Trace logs?
Hi All,
I am running some UNIX OS commands from File adapter as showing in below Blog.
Problem is that in SXMB_MONI & in Runtime workbench I can not see any Trace logs written by those UNIX OS commands.
Even I am writing echo messages.
Runtime Workbench says only OS command file executed.
Please guide me where I can see OS trace if some OS command fails?
Any transaction code even at BASIS level exist?
Or the only other way round exist is I need to write log into some files.
/people/daniel.graversen/blog/2008/12/11/sftp-with-pi-the-openssh-way
I am using PI7.1.
RegardsI think no solution, other then writing ABAP code using RFC SXPG_COMMAND_EXECUTE and put log/trace in some table/application.
-
Windows Server 2012r2 Failover Cluster Event Trace Log files
Hi
The only documentation I can find regarding event trace log files (Diagnostic.etl.*) for Failover Clustering relate to Server 2008/2008r2, which state that the etl files should be in C:\Windows\System32\winevt\Logs.
I have been exploring a clustering lab for Server 2012r2 and cannot find these files in that folder.
Strangely the PS cmdlet Get-ClusterLog still works!
Where are the etl files?
TIAHi,
Please check if the log is available in C:\ProgramData\Microsoft\Windows\WER\ReportQueue\.
If not, you can use Get-ClusterLog with the Destination parameter to get the log file.
Destination
Specifies the location to copy the cluster log(s) to. To copy to the current folder use "-Destination ." for this parameter.
http://technet.microsoft.com/en-us/library/ee461045.aspx
Thanks.
Jeremy Wu
TechNet Community Support -
SqlServer 2008 Database Status Showing(Recovery pending)
How to get this database in online?
This is SharePoint Content database.
BadriSqlServer 2008 Database Status Showing(Recovery pending)
How to get this database in online?
This is SharePoint Content database.
Badri
Hi,
Please try running below in master database
restore database db_name with recovery
Chances are that this command would not succeed because I guess there was corruption in database and you restarted SQL Server service. Or can you please tell how your database went into recovery pending state.
Please check SQL Server errorlog you would find information regarding this change. Please post relevant log information here. Please check event viewer as well
Please mark this reply as answer if it solved your issue or vote as helpful if it helped so that other forum members can benefit from it.
My TechNet Wiki Articles -
Biztalk 2013 configuration with remote sqlserver 2008 R2
Hi
can any one help me to configure Biztalk server 2013 with remote sqlserver 2008 R2(Installed in other system) ,
what are the steps need to be follow to configure the same.Hi All,
Thanks for the quick repose ,i am getting below error while configure the BTS 2013 .
Error Details:
TITLE: Microsoft BizTalk Server Configuration Wizard
Failed to create the SQL database 'SSODB' on SQL Server '' (with SSO Administrator account 'SSO Administrators'). (SSO)
For help, click: http://go.microsoft.com/fwlink/events.asp?ProdName=Microsoft+BizTalk+Server+2013&ProdVer=3.10.229.0&EvtSrc=SSO&EvtID
ADDITIONAL INFORMATION:
(0xC0002A21) An error occurred while attempting to access the SSO database.
(SSO)
For help, click: http://go.microsoft.com/fwlink/events.asp?ProdName=Microsoft+BizTalk+Server+2013&ProdVer=3.10.229.0&EvtSrc=SSO&EvtID
An error occurred while attempting to access the SSO database. See the event log (on computer ' ') for more details.
(SSO)
For help, click: http://go.microsoft.com/fwlink/events.asp?ProdName=Microsoft+BizTalk+Server+2013&ProdVer=3.10.229.0&EvtSrc=SSO&EvtID
BUTTONS:
OK -
Originally my sqlserver 2008 software was installed into E:, but I didn't see any drive selection options available during the upgrade steps, so now my sqlserver 2014 is installed into default C: drive.
If there are any ways to specify different drive ?
Thanks
Sophia Su“Upon doing the initial upgrade, can I designate the target drive/letter”?
I didn’t see a place to change it in the upgrade process.
I don't want to uninstall sqlserver 2008, I just want to upgrade from 2008 to 2014 and be able to put the sqlserver 2014 software into the same drive (not C:) as my sqlserver 2008 is.
If previous version was on E drive upgraded version should remain on E drive as well. AFAIK there does not comes an option to specify different drive letter when doing in place upgrade how ever if you do side by side upgrade you can install new instance
of 2014 on what ever drive you like
In side by side upgrade you have to first install SQL Server 2014 and then move databases using backup and restore then migrate logins and jobs using scripting method.
After you are sure your upgrade process is complete you can uninstall 2008 instance.
How do you check your SQL Server 2014 is installed on C drive. Please note even if you install SQL server on some other drive(like D,E..) some binaries always go on C drive thet nature is by default , if you are looking at binaries then its wrong to
deduce that your SQL Server is on C drive.
Can you go to E drive can you see program files..Microsoft SQL Server ?
Please also read file location of Installed SQL server Instance
Please mark this reply as answer if it solved your issue or vote as helpful if it helped so that other forum members can benefit from it
My Technet Wiki Article
MVP -
Hi,
I am getting the error "The conversion of a varchar data type to a datetime data type resulted in an out-of-range value."
when converting date in format Date in varchar(50) format MM/DD/YYYY HH:MM into YYYY-MM-DD format using MS SQLServer 2008 R2.
Please note that the date in column is Date(varchar(50), null).
I used the following syntax:
SELECT CONVERT(VARCHAR(10), Date, 102) AS Day
FROM dbo.[RCap_2G MM/Operator]
WHERE (CONVERT(VARCHAR(10), Date, 102) > { fn NOW() } - 1)As noted above, either use ISDATE or TRY_CONVERT with the correct conversion style number:
-- SQL Server 2012 code
DECLARE @Date varchar(50) = '10/23/2006 10:20';
SELECT TRY_CONVERT(DATE, @Date, 101) AS Day
-- 2006-10-23
Datetime conversion blog:
http://www.sqlusa.com/bestpractices/datetimeconversion/
Kalman Toth Database & OLAP Architect
SQL Server 2014 Design & Programming
New Book / Kindle: Exam 70-461 Bootcamp: Querying Microsoft SQL Server 2012 -
Error in trace log - Error in Mapping EngineODIException
Hi,
in the trace log file of OID i am getting the following error:
Trace Log Started at Mon Sep 24 08:56:34 CEST 2007
c360f8d929b0427faf0c332e05e78025_85bf9c6eeeec452c8a41c3ab23d03fc6 - Error in Mapping EngineODIException: Exception Connecting to DB :java.sql.SQLException: ORA-01017: invalid username/password; logon denied
ODIException: Exception Connecting to DB :java.sql.SQLException: ORA-01017: invalid username/password; logon denied
at oracle.ldap.odip.gsi.DBConnector.connect(DBConnector.java:134)
at oracle.ldap.odip.prov.ProvWriter.initialise(ProvWriter.java:113)
at oracle.ldap.odip.engine.ProvThread.mapInitialise(ProvThread.java:642)
at oracle.ldap.odip.engine.ProvThread.execMapping(ProvThread.java:559)
at oracle.ldap.odip.engine.ProvThread.runOldVersion(ProvThread.java:543)
at oracle.ldap.odip.engine.ProvThread.run(ProvThread.java:173)
java.lang.NullPointerException
at oracle.ldap.odip.gsi.DBConnector.end(DBConnector.java:210)
at oracle.ldap.odip.engine.ProvThread.mapEnd(ProvThread.java:718)
at oracle.ldap.odip.engine.ProvThread.runOldVersion(ProvThread.java:546)
at oracle.ldap.odip.engine.ProvThread.run(ProvThread.java:173)
java.lang.NullPointerException
Exception in Provthread
It started since I changed password of PORTAL schema.
everything works but i am wondering what's going on because trc file is now full of those messages
thanks,
BranislavHi Sami,
Check if thse threads can help u,
Error in BPE Adapter
BPM - BPE_ADAPTER errors
BPE Adapter Error
Exeception during execution error
***********Reward points if helpfull************ -
How to trace Logs for WebService connectivity - 3rd Party to ECC
Hi Experts,
Basically it's a simple scenario, the 3rd party will send a soap request with the information in it and wiill be sent to ECC and be written on a table.
I'm wondering on how to trace logs on the soap request sent from 3rd party to an ECC environment. I used Altova XMLSpy and soapUI and to create a soap request from wsdl created in SOAMANAGER. Both of the software returns a response. Do these both of these software really sends data (soap request) going to the binded address or it's just i simulation that wsdl created is valid.
Cheers,
R-jayHello,
These third party tools send web service requests to SAP system. You can trace Service invocation and download the request and response payloads using SOAMANAGER. In Logs and Trace tab, edit the Trace configuration with suitable trace level and expiration time.
Thanks,
Venu -
What file do I need to upgrade SQLServer 2008 R2 on a virtual machine?
What file do I need to upgrade SQLServer 2008 R2 on a virtual machine?
Hi Jerry_TKO,
If I understand correctly, you want to update to SQL Server 2008 R2 from earlier version. If in this scenario, we should notice that not all versions and editions are supported to update to SQL Server 2008 R2. For more details about supported versions and
editions in SQL Server 2008 R2, please see:
http://msdn.microsoft.com/en-IN/library/ms143393(v=sql.105).aspx
For local installations, you must run Setup as an administrator. If you install SQL Server from a remote share, you must use a domain account that has read and execute permissions on the remote share. The following document about how to upgrade to SQL Server
2008 R2 is for your reference:
http://msdn.microsoft.com/en-IN/library/ms144267(v=sql.105).aspx
http://www.techrepublic.com/blog/10-things/10-tips-for-upgrading-to-sql-server-2008-r2/
If there are any misunderstanding, please elaborate the issue for further investigation.
Regards,
Katherine Xiong
Katherine Xiong
TechNet Community Support -
How to copy a database to another location in sqlserver 2008 express edition
Hi,
Please help for to copy a database to another location in sqlserver 2008 express edition
With many thanks
Pol
polachanif you are using SQL Server 2008 express edition
you are NOT able to use Copy database wizard so the only option you have is to try as mentioned above
a) Backup /Restore
Create a new DB to where you want the copy should go and
Make a Full Backup with .BAK of your original database and Restore the backup on other system and Right click on the the new DB you created and Restore by navigate to your .BAK and make sure MDF and LDF file match the new.
http://msdn.microsoft.com/en-us/library/ms190436.aspx
b) Detach/Attach
Detach the database and copy the database files to other system; and attach these database files.
I hope this is more informative for you and Good-luck
Please remember to click “Mark as Answer” on the post that has answered your question as it is very relevant to other community members dealing with same problem in seeking the right answer -
Hi guys,
I posted the same question with oracle.ittoolbox few days back and yet to get an answer. During the initial stages of implementation, I remember the consultants using a particular jsp/html page under System Administrator responsibility to view the status of diag, trace, log enabled status of the system, akka, if a profile option is enabled to debug, trace, or log was listed...
Now, I want to access the same page (I have system administrator resp). The SQL query provided by metalink is too complex to understand
Please helpHello again Hussein and others
Our issue was NOT just with FND% profiles, rather with the consultants turning on diag and debug against their respective modules and later forgetting to turn them off. Take our case, we had SLA Debug enabled from last 2010 Feb until two days back, which has created 21 million rows of data with XLA diag table :)
Once after turning the SLA debug and truncating the table (following Oracle guidelines) we have a database which is 1/3 of the size until recent times. Oracle has provided us an SQL query which produces the present status of all profiles with latest values (enabled or disabled). We were able to see a number of profiles with debug enabled and successfully disabled them.
I represent the internal IT team and always have the acceptance for human errors like the SLA debug event. Oracle "apologized" for not having a screen or html form for monitoring such resource hungry activities. The output from the SQL script they provided is too complex for a person who doesn't have core techno functional knowledge about the system.
Anyway, finally feeling a bit better...
Thanks guys -
Data Integrator build failure - could not open trace log file
HI, this is regarding data integrator 11.5. I have a job that failed trying to run a data flow with the below error. Its run perfectly fine plenty of times in the past. It looks like it just couldn't open the trace log file that it had been writing to... anyone know what would cause this? No one would have been opening or modifying that file during the job except for the job itself. I was just wondering if anyone has run into this before. I am sure it will work if I just
(11.5) 03-27-08 02:05:20 (E) (1128:5536) RUN-050011: |Dataflow xMatter_Exception_Fee_Delta_DF
Error: .HI, this is regarding data integrator 11.5. I have a job that failed trying to run a data flow with the below error. Its run perfectly fine plenty of times in the past. It looks like it just couldn't open the trace log file that it had been writing to... anyone know what would cause this? No one would have been opening or modifying that file during the job except for the job itself. I was just wondering if anyone has run into this before. I am sure it will work if I just
(11.5) 03-27-08 02:05:20 (E) (1128:5536) RUN-050011: |Dataflow xMatter_Exception_Fee_Delta_DF
Error: . -
We turned on the trace in visual administration tool for JDBC adapter thro' VA>Service>Log configuration>>locations>>com>>sap>>aii>>adapter>>JDBC.
Where should I look in visual adminitration tool for the trace log for JDBC adapter?
We are using Acknowledgment=Transport in Asynchonous "SEND" step of BPM to receive acknowlegement of updating database.
It is updating database but in Tcode-SXMB_MONI, Ack Status = ? "still waiting acknowledgement"
Can someone please help me to figure out where should I look for JDBC logs and why we are not able to receive acknowlegement?
Thanks in advance!
MrudulaHi,
- log on to the Visual Administrator
- start service - Log Viewer
- cluster -> server -> logs
- choose defaultTrace.trc
did you set tracing level to debug for JDBC adapter..
Cheers,
Naveen -
About a trace log level of Oracle VSS Writer.
I verified the backup using the Oracle VSS Writer of Oracle11gR2.
In order to check the behavior of the Oracle VSS Writer, I want to output the trace log of Oracle VSS Writer.
However, there is the following description in the document, there is no description of the trace level.
oravssw SID [/tl trace_level]
/tl :Specifies the trace level for a Oracle VSS writer for a specified SID.
Does somebody know the value?I'm not sure whether any version of Oracle -and you don't mention which 4 digit version you are using - is certified against Windows 2012.
So whatever hack you apply, for sure My Oracle Support will not be able to deal with any issues which may arise from this.
I'm sure you are aware Microsoft has a very bad track record on downwards compatibility, so I recommend downgrading this system to a certified version of Windows.
Sybrand Bakker
Senior Oracle DBA
Maybe you are looking for
-
Read tables from different schemas in oracle
Hi, I'm trying to write a code to run a query to get data from an Oracle server, the problem is that the query refers to multiple tables in multiple schemas... the regular way to do it in oracle (SCHEMANAME.TABLENAME) does not work in excel vba query
-
To Switch to 802.11G or Wait
I am currently connected to Bellsouth DSL through a three year old linksys comb modem/router that looks like it is 802.11b. When I run the speed test through both testing services, my speed is about 220kbps for upload and download. I purchased (not o
-
Messages in Pop-over Message Area
Hi, I have a Pop-over where I have defined a Message Area. But whenever I try to show a message in the Pop-over's Message Area, the message gets displayed in the Message Area of the View from where this pop-over is invoked. Please let me know how t
-
Listening to Live Radio Streams???
Hmmmm... This is a device has been promoted as a perfect portable internet device with iTunes, Internet, Safari, iPod, Podcasts and much more....but... ...why can't we listen to a live stream of a radio broadcast, particularly pro and college sports
-
Dear All, EWA for our target system is not generating regularly. i m getting below error,any one plz advice how to correct the issue . Error: No authorization to log on as a trusted system (Trusted RC=2). Function group SCCA cannot be called in RFC