Reg radiobuttongroupbykey ui element in wd abap
Hi All,
Can anybody give me the step by step procedure to display the selected button in radiobuttongroupbykey ui element.
Moderator message - Cross post locked
Rob
Similar Messages
-
Reg radiobuttongroupbykey ui element ui element
Hi All,
Can anybody give me the step by step procedure to display the selected button in radiobuttongroupbykey ui element.hi
create a uielement radiobuttongroupbykey
create a context node with 1 attribute. the data element used for defining the attribute must have some fix values in domain.
bind the UIelement with this attribute.
All the fix value of domain will be available as possible radio button.
In case of dropdown by index, u need to fill the contaxt node with possible values by yourself.
Thanks
Vishal Kapoor -
Fileupload UI element in WD ABAP
Hi ,
Any one have worked using fileupload UI element in Webdynpro ABAP.
Regards
UshaHi usha...
try this tutorial....
<a href="https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/f5d3c40a-0801-0010-55b7-9e3b01745a40">upload/download file in WD</a>
<a href="https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/business_packages/a1-8-4/39tutwd_fileupdownload.zip">File upload/download project</a>
regards,
Vijay -
Unable to set state to 'required' for RadioButtonGroupByKey UI element
Hi all,
I'm using RadioButtonGroupByKey UI element that is bounded to a simple type.
Simple type looks like this:
0 -- Sunday
1 -- Monday
2 -- ...
The selectedKey property is bounded to the simple type.
The state property is set to 'required'
Although I'm using a radio button I don't want to set default selection.
I cannot set label for RadioButtonGroupByKey (unlike inputField).
I'm expecting to see a red asterisk near the radio button but I don't.
What else do I need to set in order to see the red asterisk?
I'm using 7.00.14
Regards,
OmriHi
We need to initialise the value before using it In validation case :
First go through this [thread|How to highlight checkbox group UI element upon validation error.;
for code sample refer [this|How to highlight checkbox group UI element upon validation error.;
Best Regards
Satish Kumar -
OnSelect event for a Drop down UI Element in Webdynpro ABAP Select Options
Hi Experts
We have built our UI based on the webdynpro ABAP Select Options. We have a requirement that, when we change the value of a drop down box in the UI, I need to hide some fields. Can anybody help me out in handling of OnSelect event of a drop down box built using webdynpro ABAP Select Options. We are on SAP Netweaver 7.0 EHP1.
Rrgards,
Srikanth.
Edited by: Srikanth Kancherla on Apr 29, 2010 10:43 PMHi Srikanth,
as you seem to be already aware, the component is dynamically built.
so you would have to enhance the code that builds the element and insert a reference to a new action (enhancement) that could handle the onSelect event.
What is it about this that you particularly want help with?
Cheers,
Chris -
Reg calling Transaction code in Webdynpro ABAP
Hi All,
Can I call Transaction code in Webdynpro ABAP Portal Application. If so, how can this be possible? Can anybody give me a lead?
Thanks.
Kumar Saurav.Hi,
The most easy Way is here:
1) Test any Webdynpro Application from SE80 when the webdynpro Browser opens to display output
Copy its HTTP link, Suppose we get the below link
http://r3d01web1.Siemens.dk:8001/sap/bc/webdynpro/sap/z_dynamic_view?sap-client=002&sap-language=EN
2) Now replace some part of the above link ( webdynpro/sap/z_dynamic_view?sap-client=002&sap-language=EN ) with the new link part ( gui/sap/its/webgui?~transaction=PA30 )
So that the newly generated link is such that the below one:
http://r3d01web1.Siemens.dk:8001/sap/bc/gui/sap/its/webgui?~transaction=PA30
Note in place of PA30 you can put any of your desired tcode.
3) Now Just Make a webdynpro component and in its View layout put a LINK TO URL ui element
and in its property REFERENCE just past the http link ( http://r3d01web1.Siemens.dk:8001/sap/bc/gui/sap/its/webgui?~transaction=PA30 )
4) Activate and test your webdynpro Application. -
PageHeader UI Element in WebDynPro ABAP
Hi,
We are not using SAP Portal and want to make modifications to the e-recruiting webdynpro applications.
We want to change the color and font size/ type of the pageheader UI element in ABAP WebDynpro.
The eclipse theme editor does not show the PageHeader element. Hence there is no possibility of that being changed in the eclipse theme editor.
Is there any other way we can do it? Has anyone found a solution to this issue? I've searched SDN but could not find anything that can point me to the solution.
Need your expert advise as soon as possible.
Regards,
Sanjiv TyagiHI Roman,
Sorry for the late response. Here are the details that you wished to know.
Software Component..........Release..........Level..........Heighest Support Package
SAP_ABA............................700.................0020..........SAPKA70020
SAP_BASIS..........................700................0020..........SAPKB70020
ERECRUIT..............................603...............0005..........SAPK-60305INERECRUIT
Let me know if you could find something.
Thanks,
Sanjiv -
Interactive Gantt Element & UI feasibility - ABAP Webdynpro
I have a requirement to design a interactive timeline chart in ABAP webdynpro. Infact, the UI should be a replicate of CM33[Capacity Planning Workbench] standard transaction in our SAP. Can you let me know whether its possible to design such a interactive graphical UI in ABAP Webdynpro without using any JAVA coding/controls/plugins???
In my R&D, I have found that instead of using Business Graphics, Gantt UI can be used which will provide more interactive [lot of event handling] options. But it seems Gantt UI has to be used with XML and JNET.I don have any idea on this. I went through some of the documents but im not able to understand. Is it that JNET understanding requires JAVA skills. I dono how to design the frontend with Gantt UI and i could not find any useful documents.
Can you please help me stating whether this Capacity planning [CM33 transaction] can be replicated using only ABAP Webdynpro through Gantt UI element or any other UI without using JAVA coding.?? It will help me alot if you can provide some documents on the same..
@Thomas jungYou don't need to code any Java to use the Gantt-Plugin (JNET) in Web Dynpro ABAP. Although it is written in Java, you feed the plugin with an XML-file which contains the data in the required format. That format is extremely complex. You find the documentation below.
For learning purposes I recommend the Web Dynpro Applications:
- WDR_TEST_GANTT
- WDR_GANTT_TEST
You have to analyse the XML-files which are attached as MIMEs to the WD components. For your own solution, you will have to transform your data into that xml format, e.g. by a Simple Transformation oder XSLT.
[Documentation Web Dynpro UI Element Gantt|http://help.sap.com/saphelp_nw70ehp2/helpdata/en/68/248841a79f1609e10000000a155106/frameset.htm]
[JNet/JGantt Developer Documentation|http://www.sdn.sap.com/irj/scn/index?rid=/lw/uuid/f010ec31-9658-2910-3c83-c6e62904eceb&overridelayout=true]
The JNet Documentation contains additional examples, sadly there is none for Gantt. But it shows clearly the power of JNET.
If you get your hands on a PPM 5.0 installation, I highly recommend to analyse the newest cProjects-Gantt-chart which is amazing. -
Reg Number of elements at this level and Variables
Hi Experts,
What is the purpose of Number of elements at this level in the dimensional hierarchy of BMM layer on what basis default it will show 1 if we change this value into 2 what happens .
Difference between non system session variables and dynamic repository variables in which scenarios we will use these bth variables.Hi Rafi,
Sorry for delay response.
Nonsystem Session Variables :-
The procedure for defining nonsystem session variables is the same as for system session variables.
A common use for nonsystem session variables is setting user filters. For example, we could define a nonsystem variable called SalesRegion that would be initialized to the name of the user’s sales region.
We could then set a security filter for all members of a group that would allow them to view only data pertinent to their region.
2. difference between dynamic repository variables and non-system session variables?
Dynamic Repository Variables:-
We initialize dynamic repository variables in the same way as static variables, but the values are refreshed by data returned from queries. When defining a dynamic repository variable, we will create an initialization block or use a pre-existing one that contains a SQL query. We will also set up a schedule that the Oracle BI Server will follow to execute the query and periodically refresh the value of the variable.
Note: When the value of a dynamic repository variable changes, all cache entries associated with a business model that reference the value of that variable will be purged automatically. Each query can refresh several variables—one variable for each column in the query. We schedule these queries to be executed by the Oracle BI Server.
Hope this help's
Thanks,
Satya -
Hi,
Im using Analytics ui element to achieve drill down functionality. Is it possible to provide drill down functionality in Webdynpro java using Analytics UI element? Im intrigued by certain properties - animateBy, animation etc for this UI element. I tried changing the values for these properties,but found no effect on the chart.
Im using SAP NW CE 7.2 - any pointers would be helpful.
Regards,
MaggieHi Dinesh,
Have you checked the cardinality of your context node that is binding to the table? This must be 0..N.
Regards,
Isaac. -
Reg:Email id of the PERNR ABAP-HR
Hi Team,
I have a requirement here that needs to send a mail to the Email address of the PERNR.
So here the question is How can i get the email id of the PERNR??
email address are stored in USR21 table i only have PERNR ?? So how can i relate it?
in the infotype PA0105 we have the field USRID_LONG where we can get the email id some times but not sure.
If i can get either the BNAME or the ADDRNUMBER and PERSNUMBER also fine ..
Please help me to pull the logic for this.
Thanks!
Karthik.SSometimes you can have a nemail address in PA0105, just check type of Communication, PA0105-USRTY (T591A)
Else use FM HR_GET_USER_FROM_EMPLOYEE (sister of R_GET_EMPLOYEES_FROM_USER) to get user id, then use BAPI_USER_GET_DETAIL or SUSR_USER_READ + ADDR_PERS_COMP_GET_COMPLETE .
(I often saw PA0105 for personal mail, reserved to HR, and office mail in user id)
Regards,
Raymond -
Please if you help me with this, are you kind!!! .
You need not re-register the program. You need to activate the program. If you get a message telling you there are too many activations, it should give you the method to contact adobe to cure the problem. You can get help with your activation problem here:
Activation & Deactivation Help -
Menu elements in ABAP webdynpro?
Hi,
Is there any view elements available in ABAP webdynpro which is similar to Menu /Menu elements in other languages like VB or D2K?
I want to create menu like this:
Screen
Screen1(it will be view1 of component1)
Screen2(it will be view2 of component2)
Then how to link this?Hi Mog,
You could use button choice and you could achieve the same functionality of MENU .
Create a Button choice SCREE and give SCREEN1 and SCREEN2 as teh choices.And there is provision associate an action with each choices.So you could very well fire view plugs and chieve the navigation.
Thanks
Anzy -
Hi Friends,
I am working as a ABAP Consultant for the past 5 years in 4.6c and 4.7. I am more exposed to Reports and Workbench tools. I am pretty sure that I really lag in terms of SAP Technologies growth.
I need to improve my skills and at the same time update to the current requirements. I am confused to proceed with my next step. Well, Certification is the only way where I can keep in touch with the updates, So I need your suggestions in my scenario.
Your suggestions will be appreciated.
Thanks and Regards
LeoHi
Pls go through the following link hope it will help u out
http://www.sap-img.com/abap/important-abap-faq.htm
http://www.sap-basis-abap.com/
http://www.sap-img.com/bdc.htm
http://sapdomain.com/certification.php
http://www.techinterviews.com/?p=198
ABAP Workbench Fundamentals (For course BC400)
Create ABAP programs and the most important Repository objects using appropriate ABAP Workbench tools
Navigate in the Workbench and use the syntax help
Process source text with the ABAP Editor
Test programs using the Debugger
Define elementary and structured data objects
Overview of important ABAP statements
Use internal tables (introduction)
Use modularization techniques local in the program
Database dialogs: information about database tables in the ABAP Dictionary, read database tables
User dialogs: list, selection screen, screens
Overview of ABAP Web Dynpro (from SAP NetWeaver 2004s)
Use function groups and function modules, classes and methods, BAPIs
Project-oriented development using the Transport Organizer
Overview of the different options for adapting software
Advanced ABAP (For course BC402)
ABAP runtime environment
ABAP types and data objects
Unicode
Analysis tools for programs
Work with internal tables
Program modularization with function modules
Performance of complex Open SQL statements
Dynamic programming with field symbols and references
Runtime type information, runtime type creation
Program calls and memory management
ABAP Objects : Object Oriented Programming in R/3 (For BC404)
Introduction
Analysis and Design
Principles
Generalization/Specialization
Events
Global Classes/Interfaces
Summary and Outlook
Developing User Dialogs (For BC410)
Course Overview
Basics for Interactive Lists
The Program Interface
Interactive List Techniques
Introduction to Screen Programming
Screen Elements for Output
Screen Elements for Input/Output
Screen Elements: Subscreens and Tabstrip Controls
Screen Elements: Table Controls
Context Menus
Lists in Screen Programming
Preview: Control Framework
Enhancements and Modification (For course BC425)
Overview of the options for making customer-specific adjustments to the SAP standard system
Personalization (transaction variants)
Enhancements to:
- Elements of the ABAP Dictionary
- SAP programs
- SAP screen menus
- SAP screens
Enhancement techniques:
- Enhancements to elements of the Dictionary
- Enhancements via customer exits
- Business Transaction Events (BTEs)
- Business Add Ins (BAdIs)
- User Exits
Modifications:
- Procedure
- Utilities (Modification Assistant, Modification Browser)
- Modification adjustment
SAP Note Assistant (tool for SAP Note implementation)
ABAP Dictionary (For course BC430)
Introduction
Tables in the ABAP Dictionary
Performance in Table Accesses
Consistency through Input Checks
Dependencies of ABAP Dictionary Objects
Changes to Tables
Views
Search Helps
Developing Internet Application Components (For course BC440)
Course Overview
Introduction
Internet,Intranet & WWW
HTML,CSS and JavaScript
Internet Transaction Server
ABAP Workbench Basics
SAP GUI for HTML
Easy Web Transactions
ITS Flow Logic
HTML Business
Summary and Outlook
Form Printing Using SAPSmart Forms (for course BC470)
Overview of SAP Smart Forms
General concepts in form printing
- Windows and pages, main and secondary windows, text and data
Creating and adjusting an SAP Smart Form
- Form Builder, Form Painter, form logic, node types (texts, graphics, addresses, and so on), text modules
Variables
- Form interface, global data
Tables
- Table Painter, dynamic tables, headers and footers
Smart Styles
- Style Builder, paragraph formats, and character formats
Including graphics
Change forms and application programs
Developing BAPI enabled Web Applications with Java (For course CA926)
For course TABC41, 42 and 43
Basis technology overview
ABAP Workbench
ABAP Dictionary
ABAP Development Projects
Advanced Programming in ABAP Development Workbench (week 3 - 4 TABC42")
Techniques of List Processing
Transaction Programming
Database Updates
Enhancements and Modifications
Interfaces for Data Transfer -
WD ABAP: Need beginner help on TREE UI ELEMENT
Hi all,
I'm struggling with the Tree element in Webdynpro (ABAP!).
Can anyone provide me with a help/tutorial/examplecode on how to correctly bind a tree to context, and how to fill the context
I have an IT with a field (int) that descibes on what level the item has to go into the Tree.
i hope i can use this to populate the context
example IT:
0 my cars
1 trucks
2 red Dodge
2 blue RangeRover
1 sportscars
2 red ferrai
2 blue porscheTina,
This is indeed what i needed.
Thank you!
point awarded
Joris Bots
PS.
Here a link to the document described by Tina:
<a href="http://sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/webdynpro/constructing%20a%20recursive%20and%20loadable%20web%20dynpro%20tree.pdf">http://sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/webdynpro/constructing%20a%20recursive%20and%20loadable%20web%20dynpro%20tree.pdf</a>
Message was edited by: Joris Bots
Maybe you are looking for
-
I would like to transfer photos from a PC to an iPad Air 2. I would like to avoid iTunes if possible. I have been told that if I put my photos on an SD card i can use a "Lightning to SD Card Camera Reader" to read the photos on my iPad and then copy
-
Upgraded AVG Free this morning. Next Firefox opening got the message "bookmarks and history system will not be functional" etc. Followed the instructions in the article but no recovery occurred. Then spent 45 minutes on the phone with AVG, ending wit
-
Problems with cropping PDF in Automator.
I'm trying to create a workflow for a photo booth contraption I plan to set up at an event. 3 photos taken in each session will then be placed by the *New PDF contact sheet* action. All is well here except that now I need to crop the PDF (which i'm o
-
Font Book Automatic Font Activation
Hello I have been happily using Automatic Font Activation from font book for quite long time. Today i noticed that feature absolutely died. Did not heal cleaning caches, restarting ATS Server via ATSUtil in Terminal command line. Simply feature stop
-
How to backup MSSQL database in ECC6
Hi guys, i am doing patching for our internal ECC6 server. So i need to backup the database before run the patches. I have onliy done database backup in Oracle using Brtools. So i am not familiar with Ms Sql Server backup. Can anyone tell me step by