Reg: REport Painter Urgent

HI all,
I want to modify the report using grr2 but in libray particular report not showing. from easy access report is working/ how can see that report in library.
regards
JK rao

Hi,
Execute the report and then go to extras in menu and select technical information. Here you will be able to see table, library, report, report and report group relating to report. Go to GR32 and give library and report name and select section to modify the same. Alternative, when you execute the report and select for techinical information, place the curson on report and click navigate and then you can select change and modify the report.
Hope this helps.
pls assign points to say thanks.

Similar Messages

Hi Reg Report painter

Hi All,
I am new to the Report Painter. when I created a small program, i got the Error :
A single value has not been specified for characteristic KOKRS.
Could any one help me out reg this, And i Checked all the links in the SDN Forum Regarding Report painter but i didn't understand the process of creating the Report Painter. Can any one please help me in Understanding the process of creating the Report Painter.
And also I want to know Why we use Report Painter, and what is the purpose of that.
Thanks & Regards,
Vijay.

Hi
Report painter will create reports based on the conditions we have given in Characteristics and Key Figures
You are getting the error because you have to specify single or multiple values in Characteristic definition
Like KOKRS 10 or KOKRS 10 to 20 like that...
Here is the report painter help
http://www.virtuosollc.com/PDF/Get_Reporter.pdf

Reg report painter

Hi experts can anyone help me to find where the report painter is and what is the use of it and pls give the steps for navigation...
with regards
Sellavel

hi,
The majority of reports end users use in the R/3 System is Report Painter reports. Most of these reports (@ 80+ %) began as Report Writer reports.
The major difference is Report Painter uses a graphical interface (analogous to Notepad and MS Word).
Very few R/3 users employ Report Writer however, many still use, modify and develop reports using Report Painter. Report Painter permits complex groupings and drill-down reporting very useful for such applications as FI-CO and SD. It can also be used interactively allowing users to enter variables for specific steps; thereby permitting drill-across' functionality.
However, Report Painter does have its limitations; it can display only numeric data (excluding column headers) therefore, short text, etc. is not available. It is much easier (quicker) to modify than ABAP and requires no ABAP expertise however, many combine Report Painter with ABAP reports to fill-in many of the missing pieces. Layout design is archaic and rudimentary ~ therefore; many use Report Painter to retrieve and massage the data' and eventually export it into Excel for end use.

Report Painter - Urgent Please

Please see the problem in the below thread
Report Painter
It would be great, if anyone can help me out.
Many Thanks in advance.
Regards,
Kiran A.

To hide some of the reports, there is no way, but you can create a new library copying the original and assign that to the users with the required reports.
There is nothing specially required to make one cell to apply two formulas. Only one formula should work for a cell. My guess is that when there is a row formula, the column formula may not be applied.

Report Painter - Urgent

Dear All,
I am creating a form to be used in report painter with the following:
Transaction Code : FSI4 / FGI4
Library : Financial Statement Key figures / Reporting for Table FAGLFLEXT
In case of both the libraries mentioned above, we get figures based on FS items.
However, my report includes values based on GL balances as well as transaction level.
My first requirement is getting satisfied. But how do I bring in values at the transaction level in these two transaction codes and the reference libraries.
Can Anyone Please Help.

In repotr writter or painter you will not get the transaction details as you are looking.
what you get is the total movements i.e. total debits and total credits in the report.
You need to use formulas and special cell processings by selecting the required cell.
You also need to design your Financial statement version exhaustively so that you can get the GL level data.
reward points if useful.
sarma

Reg:report painter reports adding into sap menu

HI all,
HI all
How to add reports painter reports in sap menu.?
regards
JK Rao

Hi, Janardhan Rao & all other Readers of SAP Net work site,
    Private nodes
           Private nodes are no longer supported in the area menus and are
           not taken into account during migration. As a replacement, the
           favorites are available in the Easy Access.
    Including of own report trees in the menu structure
           In order to include your own area menus generated from the report
           trees into the displayed menu, you can either include the menus
           as enhancements in the SAP Menu or include them into the menu of
           a role. To do this, read the documentation on Transactions SE43
           and PFCG.
    Client dependency of the report trees
           If you have used different report trees for different clients,
           you can carry out the migration several times in the
           corresponding clients. As a result, you receive several
           cross-client area menus.
    Further information
           Also read the Release information BC_46_REPTREEMIG2. You find
           this information in every system under Help -> Release notes ->
           Complete list from Rel. 4.0 -> Release notes as at 4.6A,
           Component BC-FES-SEM, document "Change to area menus and report
           trees".
If you have any query, you may reach me
Dr. Ravi Surya Subrahmanyam, PhD Finance,
SAP FICO Consultant,
Answerthink (India) Limited,
Hyderabad. AP. India
Phone : +91 9848550024
Email : [email protected]

Drill Down - Report Painter (Urgent)

Hi,
I need to add drill down i.e. transactions CJ74 and CJI4. IN transaction GR52, I added CJ74, CJI4 as TR and RKPEP003 as RT.
My problem :
When I execute the program, and doble click on the O/P row, pop is showing all the three options i.e
1. CJ74
2. CJI4
3. RKPEP003
If I select 1st two, it is throwing me out of the report.
In the last case, it is going to the o/p of report RKPEP003 and not displaying any data as it is taking the default values as they are when I execute RKPEP003 pgm in SE38 and it is not taking values from the row/column I selected in the report painter output.
Can you please let me know how to correct this.
Thanks in advance.
Regards,
Kiran.

Hi,
Since the report is running on the server, the output shall be as well. I don't think you can use desname to specify a local folder as the server knows nothing about local machine. It only has acces to it's resources.
The user will need to generate the report and then save to local disk. You could also think about other delivery methods such as email.
Hope that helps.

Reg:eReport painter urgent

HI all,
I run the report showing figure normally . i expand fully . every top of the gl account companyo name showing i want remove the companoy name how to remove it?
regards
JK Rao

Hi,
Good morning and greetings,
Go to KE32 and in the Extras Menu > Click on Layout Display and change the layout in the way you want to see the report.
Please reward points if found useful
Thanking you
With kindest regards
Ramesh Padmanabhan

Reg:Report Painter in CO module

Dear all,
This is one of Std program - GP5DCDGCG2TA0184K1FSBBOHX4P. This program is belongs to KE80 STD SAP TC(tcode). When i am assigning this standard program to my Ztcode i am getting the different input selection screen which is i am getting when i am executing the standard transaction code . What would be the problem that i don't know?
Thanks,
Sankar M

Hi Sankar,
For tcode : KE80 the standard program is SAPMKCEE.
Check whether GP5DCDGCG2TA0184K1FSBBOHX4P program exists?
Regards,
Sravanthi

Very urgent --pls help Report Painter Problem,

Hi to all,
I have created 5 operating expenses report by cost centres through report painter. some for full period , some for actual and sone for budget.
Under one set of that cost centre reports I have many subsets under which there are cost centre groups and then the cost centres.
I want to add one more set to existing set. I have added the set and set contains one cost centre group and their are also cost centres under it.
The table which i am using for cost centre grous is GLT1 and field is RCNTR and for cost centres it is CCSS and KOSTL respectively.
In the above procedure I have two queries.
1)even after adding the set and when i try to execute the report from T- code SERP it doesnot show my created set in variation.
2)Also even if it was showing the set earlier but report was showing zero values. When i clicked on zero amount a pop up arises for plan and actual values and when i clicked on plan values it had value of Rs 255000(for cost centres). then outside why this amount doesnot appears.
PLS THIS IS VERY VERY URGENT
Regards
TANUJA

I've just read this thread three times and I have absolutely no idea what you are doing, in what version, and what you are asking for help with.
Do you want to change the message type? If you do you MUST drop the queue and start over again from the beginning.
Do you want to enqueue messages?
Post your DDL and other relevant information or you are on your own. We can not guess at your issue.

EXTREMELY URGENT: % Cost (out of Total Costs) Column in Report Painter

Hi Gurus,
I'm not new to Report Painter, but, am stuck at one thing.
In report, Col 1 shows Costs by Administration (row 1), Labor (row 2), Others (row 3) and total (row 4 being formula as total of row 1, 2 & 3).
Client wants col 2 to show % Cost of each row out of total Expenses (so totals row in this col. will have 100%)
How to do it technically.
Please help. It's EXTREMELY URGENT.
I'll award points ASAP
Regards,
SB

Its abit difficult to illustrate without having a screen dump, what you can do is make use of something called special cell definition. Now if you double click on the cell for column 1 of row 4 for total costs then the system identifies it as a cell Z001 which in fact will recognise a constant value of total costs , thereby you can define in Column 2 as a formula element with (X001/Z001)*100 thereby giving a value in %. Try it and see if it helps

Report painter problem very urgent

Hi to ALL,
I have prepared two reports of cost centre through report painter. The format is proper is both the reports. The set is also correct and values in set(i.e cost centres) are also properly
but when we execute the report one report is being executed properly while other shows zero values. only when i doubleclick on zero amt and go to plan line items then it shows me values for that particular row in report.
Why is it so? what is solution to it? can it be possible that my tables are not correct. Ia m using CCSS table.
Pls this is very urgent
Thanks in advance
Tanuja

Hi
Can you check one thing...after selecting the zero you are getting the line item...chekc the total of that items...if it is coming zero..then no problem.
If not you can check in the no.format of that report. If you select the lacs format and your amount is below ten thousand...you will get the zero value only
VVR

Report Painter Confg - Urgent

Hiiii all of u
can u plsss send me confg documentation with screen shots regarding Report Painter...
My mail ID is - [email protected]
Plssss send it to me friends my client is asking reguralry..it is very urgent for B/S and P& L reports
thanks in advance i will assign full points if it is useful to me..
regards
ramki
Edited by: Ramki on Jan 2, 2008 10:42 AM

Hello,
For Report Painter, please access the Area menu FGRP (in SAP Easy Access, type /NFGRP).
I hope I have helped you.
Daniel.

Report Painter Program.. URGENT

Hi All,
Can you guys send me a sample program on Report Painter??? Its very urgent..
Regards,
Parvez.

Hi,
Check this -
http://searchsap.techtarget.com/searchSAP/downloads/Teach_yourself_SAP_C20.pdf#search=%22CREATE%20REPORT%20USING%20SQVI%20%2C%20SAP%22
Re: Interactive ALV
Check Kishan's Reply.
Cheers,
Simha.
Reward all the helpful answers..

Tables for Sets in report writer/painter reports - very urgent

Hi All,
Does anyone know which table keeps the information of sets used in report painter/writer reports? I have to get the information like values used in the set, set usage etc.
Your help is highly appreciated and rewarded with points
Thanks in advance
Kumar

tables :setnode,
setheader,
setleaf.
or Fms
G_SET_FETCH
regards
Prabhu

Reg: REport Painter Urgent

Similar Messages

Maybe you are looking for