Reg: RFC FM
Hi,
I have to create a RFC enabled function module which will be called by a different system.
The function moudule will have a date parameter as an importing parameter and a table in the tables parameter to store the results.
However when I tried to reference the importing date parameter as p_date type syst-datum there is a message which is being displayed that "Reference Parameters are not allowed with RFC".
I am unable to understand why this message appears.The FM is not getting activated.I tried referencing the date parameter to other data types but with no success.
Please help me.
Thanks,
Sandeep
Hi,
RFC are have more checks. Here you use P_DATE LIKE SYST-DATUM. It is just data type define problem.
Regards,
Dhanunjaya Reddy.
Similar Messages
-
Hai to all,
I am created one below rfc function module. that is ZTEST_FUNC.
Expert Forums » ABAP Development » ABAP Dictionary
Thread: reg:fm
Welcome, chaitu sumi
Your Control Panel
Your Reward Points
Your Questions
There are new replies to your question.
Mark question as still not answered.
Mark question as answered.
Use the radio buttons to award points to replies.
You are watching this thread. To stop watching this thread, click "Stop Watching Thread" below. (Watch Options)
This watch sends emails by default. If you don't want to receive emails on changes in this thread, go to the watch options, un-mark the "Email" checkbox next to the thread's entry and click "Update".
Reply to this Thread Search Forum Stop Watching Thread Back to Thread List
Replies: 2 - Pages: 1 - Last Post: Aug 6, 2007 5:03 PM by: Sudheer Junnuth... Threads: Previous
chaitu sumi
Posts: 9
Questions: 9
Registered: 7/13/07
Forum points: 0
reg:fm
Posted: Aug 6, 2007 4:47 PM Reply E-mail this post
I created below function module, which is having below import parameters and tables:
FUNCTION ztest_func.
""Local interface:
*" IMPORTING
*" VALUE(S_LFDAT1) LIKE LIKP-LFDAT
*" VALUE(S_LFDAT2) LIKE LIKP-LFDAT OPTIONAL
*" VALUE(RAIL_ROAD) TYPE CHECKBOX
*" TABLES
*" IT_FINAL STRUCTURE ZTLC_SAL
data: it_cond type n,
loop_index like sy-tabix .
select zdelv~vkorg
zdelv~vbeln
zdelv~lfart
zdelv~lfdat
zdelv~wadat
zdelv~vtweg
zdelv~spart
zdelv~vkbur
zdelv~vkgrp
zdelv~kunnr
zdelv~vsbed
zdelv~ntgew
zdelv~route
zdelv~lgort
zdelv~inco1
zdelv~matnr
zdelv~mvgr1
zdelv~vsart
zdelv~rwerks
zdelv~dwerks
into corresponding fields of table IT_FRGT
From zdelv WHERE zdelv~wadat = s_lfdat1 " and s_lfdat2
AND zdelv~lfart IN ('ZGDP','ZGRR','ZRLF','ZGLF').
if Sy-subrc = 0.
Sort it_frgt
by vbeln dwerks lgort route kunnr regio vkbur vkgrp bran1 cityc.
Delete adjacent duplicates from it_frgt
Comparing vbeln dwerks lgort route kunnr
regio vkbur vkgrp bran1 Cityc.
Loop_index = 1.
Loop at it_frgt." to wa_frgt.
*select kunnr regio from kna1 into kna1 where kunnr = it_frgt-kunnr.
*select bland from t005u into corresponding fields of table it_regio where Bland = kna1-regio.
*endselect.
IF RAIL_ROAD = 'I'.
IF IT_FRGT-VSBED <> '04'.
DELETE IT_FRGT.
clear it_frgt.
CONTINUE.
ENDIF.
ENDIF.
IF RAIL_ROAD = 'R'.
IF IT_FRGT-VSBED = '04'.
DELETE IT_FRGT.
clear it_frgt.
CONTINUE.
endif.
endif.
clear wa_frgt.
select single lifnr from vbpa into vbpa
where vbeln eq it_frgt-vbeln and
parvw eq 'ZD'.
move-corresponding it_frgt to wa_frgt.
move vbpa-lifnr to wa_frgt-lifnr.
If wa_frgt-lfart eq 'ZGND' OR
wa_frgt-lfart eq 'ZGNL' OR
wa_frgt-lfart eq 'ZGNS'.
wa_frgt-LVTEXT = 'STA'.
if wa_frgt-lfart eq 'ZGNS'.
delete it_frgt.
continue.
endif.
select mseg~werks
mseg~lgort
into (wa_frgt-rwerks,wa_frgt-rlgort)
from vbfa join mseg
on mseg~mblnr = vbfa~vbeln
where vbfa~vbelv eq wa_frgt-vbeln and
vbfa~vbtyp_n = 'i'.
Endselect.
wa_frgt-netwr = 0.
if wa_frgt-netwr = 0.
select single regio region plant lgobe cityc from zsta
into corresponding fields of it_zfrgt
where werks = it_frgt-dwerks
and lgort = it_frgt-lgort
and vkorg = it_frgt-vkorg
and kunnr = it_frgt-kunnr.
if sy-subrc <> 0.
select single regio region plant lgobe cityc from zsta into corresponding fields of it_zfrgt
where werks = it_frgt-dwerks
and lgort = it_frgt-lgort
and vkorg = it_frgt-vkorg.
select single cityc from kna1 into wa_frgt-cityc
where kunnr = wa_frgt-kunnr.
it_zfrgt-cityc = wa_frgt-cityc.
endif.
select single regio region plant lgobe cityc from zsta into corresponding fields of it_zfrgt1
where werks = it_frgt-rwerks
and lgort = it_frgt-rlgort
and vkorg = it_frgt-vkorg
and kunnr = it_frgt-kunnr.
if sy-subrc <> 0.
select single regio region plant lgobe cityc from zsta into corresponding fields of it_zfrgt1
where werks = it_frgt-rwerks
and lgort = it_frgt-rlgort
and vkorg = it_frgt-vkorg.
endif.
else.
select single regio region plant lgobe cityc from zsta into corresponding fields of it_zfrgt
where werks = it_frgt-dwerks
and lgort = it_frgt-lgort
and vkorg = it_frgt-vkorg.
endif.
else.
select single * from zsta into it_zfrgt
where werks = it_frgt-dwerks
and lgort = it_frgt-lgort
and vkorg = it_frgt-vkorg.
endif.
wa_frgt-regio = it_zfrgt-regio.
wa_frgt-region = it_zfrgt-region.
wa_frgt-plant = it_zfrgt-plant.
wa_frgt-lgobe = it_zfrgt-lgobe.
wa_frgt-cityc = it_zfrgt-cityc.
wa_frgt-soffice = it_zfrgt1-Plant.
STA *
endif.
if wa_frgt-lfart eq 'ZGDP' OR
wa_frgt-lfart eq 'ZGDR' OR
wa_frgt-lfart eq 'ZGRR' OR
wa_frgt-lfart eq 'ZRLF' OR
wa_frgt-lfart eq 'ZGLF' OR
wa_frgt-lfart eq 'ZGLR' .
if wa_frgt-lfart eq 'ZGLR'.
delete it_frgt.
continue.
endif.
if wa_frgt-lfart eq 'ZGDR'.
delete it_frgt.
continue.
endif.
select single WBSTK from LIKPUK into Likpuk-wbstk
where vbeln = wa_frgt-vbeln.
if sy-subrc = 0.
if likpuk-wbstk <> 'C'.
delete it_frgt.
clear wa_frgt.
continue.
endif.
endif.
wa_frgt-LVTEXT = 'SALES'.
wa_frgt-netwr = 0.
if wa_frgt-netwr = 0.
Select single * from ZFRGT into it_zfrgt2
where werks = it_frgt-dwerks
and lgort = it_frgt-lgort
and vkorg = it_frgt-vkorg
and kunnr = it_frgt-kunnr.
if sy-subrc <> 0.
clear it_zfrgt2.
Select single * from ZFRGT into it_zfrgt2
where werks = it_frgt-dwerks
and lgort = it_frgt-lgort
and vkorg = it_frgt-vkorg.
if sy-subrc <> 0.
select single * from t001w
where werks = it_frgt-dwerks.
if sy-subrc = 0.
wa_frgt-plant = t001w-name1.
select single * from t001l
where werks = it_frgt-Dwerks and
lgort = it_frgt-lgort.
if sy-subrc = 0.
wa_frgt-lgobe = t001l-lgobe.
endif.
it_zfrgt2-lgobe = wa_frgt-lgobe.
it_zfrgt2-plant = wa_frgt-plant.
endif.
Endif.
Select single * from kna1 where kunnr = it_frgt-kunnr.
wa_frgt-cityc = kna1-cityc.
wa_frgt-regio = kna1-regio.
wa_frgt-bran1 = kna1-bran1.
select single vtext from tbrct into tbrct where braco = it_frgt-bran1.
wa_frgt-vtext = tbrct-vtext.
endselect.
select single bezei from t005u into t005u where bland = wa_frgt-regio
and land1 = 'IN'.
wa_frgt-region = t005u-bezei.
it_zfrgt2-cityc = wa_frgt-cityc.
it_zfrgt2-regio = wa_frgt-regio.
it_zfrgt2-region = wa_frgt-region.
it_zfrgt2-vtext = wa_frgt-vtext.
it_zfrgt2-bran1 = wa_frgt-bran1.
endif.
endif.
endif.
wa_frgt-regio = it_zfrgt2-regio.
wa_frgt-region = it_zfrgt2-region.
wa_frgt-plant = it_zfrgt2-plant.
wa_frgt-lgobe = it_zfrgt2-lgobe.
wa_frgt-cityc = it_zfrgt2-cityc.
wa_frgt-vtext = it_zfrgt2-vtext.
wa_frgt-bran1 = it_zfrgt2-bran1.
select single * from tvkbt into tvkbt where vkbur = wa_frgt-vkbur.
if sy-subrc = 0.
wa_frgt-soffice = tvkbt-bezei.
endif.
select single * from tvgrt where vkgrp = wa_frgt-vkgrp.
if sy-subrc = 0.
wa_frgt-district = tvgrt-bezei.
endif.
endif.
select single * from zdest into zdest where
vkorg = wa_frgt-vkorg and
regio = wa_frgt-regio and
cityc = wa_frgt-cityc and
actvt = 'A'.
if sy-subrc = 0.
wa_frgt-vtext = zdest-vtext1.
wa_frgt-bran1 = zdest-ibraco.
wa_frgt-vkgrp = zdest-ivkgrp.
select single * from tvgrt into tvgrt where vkgrp = wa_frgt-vkgrp.
if sy-subrc = 0.
wa_frgt-district = tvgrt-bezei.
endif.
else.
wa_frgt-vtext = ' '.
wa_frgt-bran1 = ' '.
wa_frgt-district = ' '.
endif.
endselect.
*endselect.
*IF kna1-regio IS NOT INITIAL.
Read table it_regio with key BLAND = wa_FRGT-REGIO.
IF SY-SUBRC <> 0.
DELETE IT_FRGT.
clear it_frgt.
CONTINUE.
ENDIF.
ENDIF.
if wa_frgt-lfart eq 'ZGDR'.
wa_frgt-NQGEW = wa_frgt-NTGEW.
wa_frgt-NQGEW = wa_frgt-NQGEW * 1.
else.
wa_frgt-NQGEW = wa_frgt-NTGEW.
wa_frgt-NQGEW = wa_frgt-NQGEW * 1.
endif.
if wa_frgt-vsbed <> '04'.
Wa_frgt-t_mode = 'Road'.
else.
Wa_frgt-t_mode = 'Rail'.
endif.
it_cond = 0.
if wa_frgt-netwr eq 0.
if wa_frgt-vsbed <> '04'.
select * from a531 into a531
where werks eq wa_frgt-dwerks and
zzlgort eq wa_frgt-lgort and
cityc eq wa_frgt-cityc
order by datbi DESCENDING.
if sy-subrc = 0.
it_cond = 1.
if ( a531-datbi >= sy-datum and
a531-datab <= sy-datum ).
wa_frgt-knumh = a531-knumh.
exit.
endif.
endif.
endselect.
if it_cond = 0.
select * from a524 into a524
where werks eq wa_frgt-dwerks and
ZZTRANSP eq wa_frgt-lifnr and
cityc eq wa_frgt-cityc
order by datbi DESCENDING.
if sy-subrc = 0.
it_cond = 1.
if ( a524-datbi >= sy-datum and
a524-datab <= sy-datum ).
. wa_frgt-knumh = a524-knumh.
exit.
endif.
endif.
endselect.
endif.
if it_cond = 0.
select * from a530 into a530
where werks eq wa_frgt-dwerks and
ZZLGORT eq wa_frgt-lgort and
inco1 eq wa_frgt-inco1 and
cityc eq wa_frgt-cityc
order by datbi DESCENDING.
if sy-subrc = 0.
it_cond = 1.
if ( a530-datbi >= sy-datum and
a530-datab <= sy-datum ).
wa_frgt-knumh = a530-knumh.
exit.
endif.
endif.
endselect.
endif.
if it_cond = 0.
select * from a527 into a527
where werks eq wa_frgt-dwerks and
ZZLGORT eq wa_frgt-lgort and
ZZTRANSP eq wa_frgt-lifnr and
cityc eq wa_frgt-cityc
order by datbi DESCENDING.
if sy-subrc = 0.
it_cond = 1.
if ( a527-datbi >= sy-datum and
a527-datab <= sy-datum ).
wa_frgt-knumh = a527-knumh.
exit.
endif.
endif.
endselect.
endif.
endif.
else.
select * from a519 into a519
where vsbed eq wa_frgt-vsbed and
rke_route eq wa_frgt-route
order by datbi DESCENDING.
if sy-subrc = 0.
it_cond = 1.
if ( a519-datbi >= sy-datum and
a519-datab <= sy-datum ).
wa_frgt-knumh = a519-knumh.
exit.
endif.
endif.
endselect.
endif.
if wa_frgt-knumh is not initial.
select single * from konp into konp
where knumh = wa_frgt-knumh.
move konp-kbetr to wa_frgt-netwr.
if konp-KMEIN = 'BAG'.
wa_frgt-NQTWR = wa_frgt-NETWR *
( wa_frgt-ntgew * ( 20 / konp-kpein ) ).
else.
wa_frgt-NQTWR = wa_frgt-NETWR * wa_frgt-ntgew.
endif.
else.
delete it_frgt.
clear wa_frgt.
continue.
endif.
else.
wa_frgt-NQTWR = wa_frgt-NETWR.
endif.
CLEAR ZFREIGHT.
if wa_frgt-vsbed = '04'.
select single distn frgt from Zfreight into Zfreight
Where Werks eq wa_FRGT-DWERKS
AND LGORT eq wa_FRGT-LGORT
AND route eq wa_FRGT-route.
else.
if ( it_frgt-lfart = 'ZGNL' ) OR ( it_frgt-lfart = 'ZGLF' ).
Select single * from Zfreight into Zfreight
Where Werks eq wa_FRGT-DWERKS
AND cityc eq wa_FRGT-cityc
AND route eq wa_FRGT-route.
else.
Select single * from Zfreight into Zfreight
Where Werks eq wa_FRGT-DWERKS
AND LGORT eq wa_FRGT-LGORT
AND cityc eq wa_FRGT-cityc
AND route eq wa_FRGT-route.
endif.
endif.
if sy-subrc = 0.
wa_FRGT-RRKM = ZFREIGHT-DISTN.
if wa_frgt-rrkm > 0.
wa_frgt-NKTWR = wa_frgt-rrkm * wa_frgt-ntgew.
endif.
IF ZFREIGHT-FRGT = 'P'.
wa_frgt-BEZEI = 'Primary Freight'.
Endif.
IF ZFREIGHT-FRGT = 'S'.
wa_frgt-BEZEI = 'Secondary Freight'.
Endif.
endif.
modify it_frgt from wa_frgt index loop_index .
Loop_index = loop_index + 1.
endloop.
endif.
Sort it_frgt by Regio dwerks lgort Vkbur district bran1 mvgr1 t_mode.
Clear:WA_frgt.
Loop at it_frgt.
If wa_frgt is initial.
move-corresponding it_frgt to wa_frgt.
wa_frgt-NQGEW = 0.
wa_frgt-NQTWR = 0.
wa_frgt-NKTWR = 0.
endif.
if it_frgt-lfart eq 'ZGDR' .
it_frgt-NQGEW = it_frgt-NQGEW * -1.
it_frgt-NQTWR = it_frgt-NQTWR * -1.
it_frgt-NKTWR = it_frgt-NKTWR * -1.
endif.
if it_frgt-regio = wa_frgt-regio and
it_frgt-dwerks = wa_frgt-dwerks and
it_frgt-lgort = wa_frgt-lgort and
it_frgt-vkbur = wa_frgt-vkbur and
it_frgt-district = wa_frgt-district and
it_frgt-bran1 = wa_frgt-bran1 and
it_frgt-t_mode = wa_frgt-t_mode.
wa_frgt-NQGEW = wa_frgt-NQGEW + it_frgt-NQGEW.
wa_frgt-NQTWR = wa_frgt-NQTWR + it_frgt-NQTWR.
wa_frgt-NKTWR = wa_frgt-NKTWR + it_frgt-NKTWR.
else.
Append wa_frgt to it_sfrgt.
Clear wa_frgt.
move-corresponding it_frgt to wa_frgt.
wa_frgt-NQGEW = 0.
wa_frgt-NQTWR = 0.
wa_frgt-NKTWR = 0.
wa_frgt-NQGEW = WA_frgt-NQGEW + it_frgt-NQGEW.
wa_frgt-NQTWR = wa_frgt-NQTWR + it_frgt-NQTWR.
wa_frgt-NKTWR = wa_frgt-NKTWR + it_frgt-NKTWR.
endif.
AT LAST .
Append wa_frgt to it_sfrgt.
Clear wa_frgt.
ENDAT.
endloop.
sort it_sfrgt by regio dwerks lgort Vkbur district bran1 t_mode rrkm nqgew nqtwr nktwr avg_frt.
Loop At IT_SFRGT.
IT_SFRGT-RRKM = 0 .
IF IT_SFRGT-NQGEW > 0 AND IT_SFRGT-NQTWR > 0.
IT_SFRGT-AVG_FRT = IT_SFRGT-NQTWR / IT_SFRGT-NQGEW.
ENDIF.
IF IT_SFRGT-NQGEW > 0 AND IT_SFRGT-NKTWR > 0.
IT_SFRGT-RRKM = IT_SFRGT-NKTWR / IT_SFRGT-NQGEW.
ENDIF.
IF IT_SFRGT-RRKM > 0 AND IT_SFRGT-AVG_FRT > 0.
IT_SFRGT-FRT_RT = IT_SFRGT-AVG_FRT / IT_SFRGT-RRKM.
ENDIF.
MODIFY IT_SFRGT .
Endloop.
Sort it_sfrgt by REGION vkorg dwerks lgort t_mode rwerks mvgr1.
loop at it_sfrgt.
move-corresponding it_sfrgt to itab1.
append itab1.
endloop.
loop at itab1.
move-corresponding itab1 to IT_FINAL.
append it_final.
endloop.
ENDFUNCTION.
AND I created another function module ZTEST_RFC.
In ZTEST_RFC MODULE I AM CALLING ABOVE FUNCTION MODULE ZTEST_FUNC.
NOW its going to dump its showing the error CALL_FUNCTION_UC_STRUC RUNTIME ERROR IS COMING.
how can i solve this problem could any body tell me its very urgent.
In ZTEST_FUNC function module only i am collecting the data and put into IT_FINAL INTERNAL TABLE.According to
http://help.sap.com/saphelp_nw04/helpdata/en/f9/3f69fd11a80b4e93a5c9230bafc767/content.htm
The reason for the Runtime error: CALL_FUNCTION_UC_STRUCT is that "Type conflict while transferring structure ".
I'd suggest therefore that you check the definition of the variables in ZTEST_RFC where it calls ZTEST_FUNC as there would seem to be a mismatch. If you are editing ZTEST_RFC, try using the Check > Extended check functionality as this will typically pinpoint such problems for you. -
Hi Techies,
This is inregard of RFC to JDBC Scenario.
Iam having an old RFC to JDBC scenarion which is working fine.
I want to call other BAPI programme using the same RFC connection.
I have changed BAPI and ABAP Programmes.
But Still in my integration builder, Still the RFC is calling the old stucture.
How flush the buffer and call the new structure using the same RFC.
Regards,
KiranBut Still in my integration builder, Still the RFC is calling the old stucture.
what about the RFC structure that is imported in IR/ ESR....was it re-imported? -
Reg: RFC call in same system
Hello All,
There is a Function module which is remote enabled (RFC) and can that same FM can be called in R3?
Thanks In Advance
Regards,
Suganya.Hi Suganya,
Yes, you can call an RFC function module within the same SAP application server environment. Just use one of the following options when you call the FM:
- SPACE
- NONE
Using these options in combination of CALL FUNCTION..... DESTINATION will allow you to invoke the FM. However, it is not required to call the FM in RFC mode, in general. But this really depends on the logic.
Shahram -
Hi Folks,
I have send send IDoc from XI system to R3 system. For this I am creating RFC Destination in XI system using txn SM59. Also the name of RFC Destination in XI is same as Logical System Name in R3 system for that client.
After creating RFC Destination I did 'Test Connection' , which was successful. But on doing 'Remote Logon' it in neither giving any error nor opening Remote Session.
Can anybody tell me why remote session is not opening?
Thanks in Advance.
SwamyHi swamy,
if it does not open the remote session the reason is that the user you are using is a non dialog (correct) user so it cannot logon in dialog mode but is used for communications.
To check if the logon parameters (user/pwd) are correct use from the menu of SM59 test->authorization.
Regards,
Sergio -
Hi all,
In my scenario i need to use RFC lookup for the receiver system . Can u guys suggest me a method how to implement the RFC lookup.
Thanks,
Siva.Hi,
Check this blogs for the steps:
1)Use this crazy piece for any RFC Mapping Lookups!
2)The specified item was not found.
Regards,
Ramya Iyer -
hai all,
i want to know exactly the reason why RFC resides on Java stack and where as IDoc resides on Abap stack, as they both belongs to SAP R/3.
Thanking You All,
Mohammed Akmal.Hey,
Same topic was discusssed y'day check this thread.
Process Integration (PI) & SOA Middleware
Prateek asnwer is most near same as it think of.
<b>Cheers,
*RAJ*
*REWARD POINTS IF FOUND USEFULL*</b> -
Hi..
Now i have a scenario for u instead :
this is what gimme a solid realistic approach :
i have records in this format lets say :
RecordID ordertype
900 0305
900 0305
920 DS01
900 0304
900 0305
920 DS02
Now here is what i have look into :
for all 900's whose Ordertype is same i have to make a call and then to decide to create/change by an RFC Lookup, with this RFC Lookup i have to then decide on which IDOC i have to map to . So that means i have to sort all the records of 900's based on ordertype with in the mapping itself and then make a call to IDOC .
I am not expecting whether to use XSLT / Java mapping , I can only use custom functions. Lemme know whatz the best approach?
for all 920's its not that complex but all 920 goes to one IDOC.
Any clue?
regards..sankarHi Michal,
>>>>>I'd go with Shravan's approach for sure
please send link for this, i do not have shravan's approach?
Hope you got my problem: or else see follow:
I am outlining the scenarios here :
I have a flat file with a following type of records:
RecordID ordertype
900 0305 ..............................
900 0305 .............................
920 DS01 .............................
900 0304 .........................................
900 0305 .....................................
920 DS02 .......................
930 -->not concerned with these type of records
Now here is what i have look into :
for all 900's whose Ordertype is same i have to make a call and then to decide to create/change by an RFC Lookup, with this RFC Lookup (i.e. i have to group all the records with ordertype same ) i have to then decide on which IDOC i have to map to .
i.e. For all 900's with one ordertype if i find that there exists an OPEN_PO then i have to call one IDOC with one set of values along with values returned from that RFC
if its OPEN_PO is blan that i should send values to another IDOC
for all 920 records i have to call another IDOC .
I am not expecting whether to use XSLT / Java mapping , I can only use custom functions. well lemme know whatz the best approach?
Please help
thanks,
regards
sankar -
Reg: RFC / IDOC required for doing CIDX Scenario
Hi! Gurus,
This is Amar Srinivas Eli. I have task here to work and implement CIDX Scenario succesfully. There are some business cases as per the CIDX standards from that I was selected one Business case i,,e, FORECASTING.
But inorder to implement that scenario I need some RFC's or IDOC lists from SAP side whether it may be a source or target side..what ever it may be...and other side will be CIDX format.
Here I need your help in the below mentioned tasks. Kindly help me out in a detailed step by step guide and do the needful to me.
1. How to get RFC / IDOC name from R3 System and I know that I can get RFC from SE37 and IDOCs
from WE05 but I need whether all the required fileds are statisfying in the RFC's or not.
2. My first preference is only for STANDARD SAP RFCs or IDOCs.
3. Please let me know how to see the inner fields present in those RFC's
4. ALso please provide any configuration guide which contains screen shots if you already worked
earlier on CIDX Scenario I mean step by step and also for testing
5... tell me if there is any other tool other than STK kit for testing CIDX messages.
6. Is there any Freeware STK tool kit is there or not...
Also share your experience and errors that you have faces while doing this CIDX Scenario.
Regards:
Amar Srinivas EliHi! All,
Thanks for your fast response..
Hi! Raja,
I gone through your points. Here I have few doubts on those please clarify that.
1. Coming to testing i didt used any testing tool , but you can comre your output using XML Spy or Stylus studio.*
*CIDx Documents,you wil find in SDN please search in SDN.
Means Without using STK Tool or else some other tool How can I get the CIDX response for my request in the Testing environment. See I am not doing this in real time I am trying to findout the solution for Business cases so I need one testing environment tool right ? Is that ALTOVA XML spy will give no right ?
Note: You told that you have done that business case IDOC--CIDX Order change / req Will you please share the information documentation I mean step by step procedure for end to end doc...based on your scenario ?
2. I know those R3 and PI settings I mean configurations means ports and RFC destinations and all those..but only thing I dono is "How you got that IDOC I mean on what basis and how did u search the IDOC?"
3. See Here I am working on topic FORECASTING it includes so many sub tasks like Deman PLan req and response, supply plan req and response and replenishment order and etc....so based on that how can I get those related RFC's or IDOC's in order to communicate from R3 Side
If Suppose I have seen one RFC/IDOC and for example out of 10 fields few are there in one IDOC and another few are there in another IDOC then in that case I need to go for Multimapping IDOCs I mean 2 Senders to one Receiver if yes Is it possible?
My first requirement is based on the above mentioned business cases how can I get the corresponding RFC's or IDOCs ?
Regards:
Amar Srinivas Eli
Edited by: Amar Srinivas Eli on Jan 5, 2009 12:19 PM -
Hi Friends,
I am using synchronous RFC<->PI<->SAOP scinario. In this RFC is getting dump in the R/3 system itself for some data and got excuted for data.I chcked both channel are fine ( i mean both RFC and SOAP communications are showing green color). there is no error message on MONI for that particular inetrface. RFC connection is fine between R/3 to PI. Is theer any problem from PI if the problem is ther what is that. Is theer any chance to see the messages which comming to PI in the R/3 itself.Hi Ramakrishana,
-->The problem might be with your RFC check it once.
-->Whether you are testing the scenario by using the RFC or using the Program?
-->If you are testing the scenario using the program make sure that the data type which yuo maintained are compatable.
Thanks -
Reg RFC to JDBC "Parsing an empty source. Root element expected!"
Hi techies,
This in regard of RFC to JDBC.
in integration test iam getting the error.
"com.sap.aii.utilxi.misc.api.BaseRuntimeException thrown during application mapping com/sap/xi/tf/_mm_mapping_: Parsing an empty source. Root element expected!"
My Mapping and interface mapping tests are working fine, while testing the configuration Iam getting this error.
My interface Mapping test result is as mentioned below
Sender Interface (RFC Sender)
<?xml version="1.0" encoding="UTF-8"?>
<ns0:ZTEST_PI_ZHRT002 xmlns:ns0="urn:sap-com:document:sap:rfc:functions">
<ZHRT002>
<item>
<MANDT/>
<PERNR>1234</PERNR>
<PERID>kiran</PERID>
<SHOPN>test</SHOPN>
</item>
</ZHRT002>
</ns0:ZTEST_PI_ZHRT002>
Reciver Interface after test
<?xml version="1.0" encoding="UTF-8"?>
<ns1:mt_receiver xmlns:ns1="urn:sap-com:RFC2JDBC"><Statement><dbTableName action="INSERT"><table>ZHRT002</table><access><PERNR>1234</PERNR><PERID>kiran</PERID><SHOPN>test</SHOPN><access></dbTableName></Statement></ns1:mt_receiver>
My message Mapping is as mentioned below
ZTEST_PI_ZHRT002 is my BAPI which is mapped to mt_receiver.
ZHRT002 it my table which is mapped to Statement of reciver
item of sender is floating ( not mapped to any reciver node)
subsequently feilds are mapped.
Reciver action is atribute (required) calling INSERT
table is "ZHRT002" (constant) (1...1)
This is my scenario.
Thanks in advance,
Regards,
KiranThis is RFC to JDBC. Is it Synchronous or Asynchronous?
Some tips:
Create JDBC target data structure something similar to this
<StatementName>
<dbTableName action=u201DINSERTu201D>
<table>realDbTableName</table>
<access>
<col1>val1</col1>
<col2>val2</col2>
</access>
</dbTableName>
</StatementName>
Map Table name and action using Constant.
>>item of sender is floating ( not mapped to any reciver node)
What is that? you have to map source item node fields to target access fields.
Please go through the below sap link . This might be very helpful.
http://help.sap.com/saphelp_nw70/helpdata/en/2e/96fd3f2d14e869e10000000a155106/content.htm -
I am created one rfc like ZTEST_func_call.
which is having import and table parameters.
now i call this rfc function moudule in another rfc function module
like:
call function 'ZTEST_FUNC_CALL' in background task.
but its no tworking
would you give me any suggestion
regards,
Chaitanyahave u passed the required variables to the import parameters and table parameters of the called FM. If u have passed correctly, then it should work fine.
-
Reg:rfc function modules
can i call below functionmodule in within the rfc function module.
CALL FUNCTION 'ZTEST_FUNC' in background task
here ztest_func is the rfc function module.
could any body please tell me its very urgent.
Regards,
ChaitanyaYes you can call it but, you have to ensure that you do a COMMIT WORK after the LUW for the function module to get executed in the background.
CALL FUNCTION 'ZTEST_FUNC' in background task
COMMIT WORK. ( This kicks off the function module).
hith
Sunil Achyut -
hi,
we have 2 clients 800 and 810 in the same server.
we have created a function module in 800 and wrote a simple select statement to fetch data from VBAK table and made it REMOTE.And i am fetching the data from 810 to update a table in 800.
When executed with SRFC its fetching the data.but with TRFC data is not being fetched. why
the code as follows:
DATA : zpexport1 TYPE TABLE OF zpexport .
PARAMETERS p_kunnr TYPE kunnr.
CALL FUNCTION 'ZP_EXAMPLEBAPI'
DESTINATION 'ISPCLNT810'
EXPORTING
kunnr = p_kunnr
TABLES
zpexport1 = zpexport1
IF zpexport1[] IS NOT INITIAL.
MESSAGE 'SUCCESS' TYPE 'S'.
ENDIF.
regardshi,
we have 2 clients 800 and 810 in the same server.
we have created a function module in 800 and wrote a simple select statement to fetch data from VBAK table and made it REMOTE.And i am fetching the data from 810 to update a table in 800.
When executed with SRFC its fetching the data.but with TRFC data is not being fetched. why
the code as follows:
DATA : zpexport1 TYPE TABLE OF zpexport .
PARAMETERS p_kunnr TYPE kunnr.
CALL FUNCTION 'ZP_EXAMPLEBAPI'
DESTINATION 'ISPCLNT810'
EXPORTING
kunnr = p_kunnr
TABLES
zpexport1 = zpexport1
IF zpexport1[] IS NOT INITIAL.
MESSAGE 'SUCCESS' TYPE 'S'.
ENDIF.
regards -
Activation error in ODS:URGENT
Hi All !
The data was loaded successfully to ODS but there was activation failure due to <b>Communication error ( RFC call ) occured .</b>
Moreover , it is saying ..<b>Request REQU_1W740A2GOY7338IOPKOF2VC4F , data package 000001 incorrect with status 9</b> .
Could tell me the reason ? And some more details about status . Sometimes it is giving Status1 , 2 , 9 . What does this mean ?Hi Rajib Goon
Just rerun the Activation Job Since its succesfull up to loading . If not just make
the Qm status in to manuall red though its in red and then just reschedule the
INfopak .Be fore rescheduling make just have a check reg RFC connectivity from u
r Basis Team.
Thanks & Regards
R M K
**Winners dont do different things,they do things differently**
> Hi All !
>
> The data was loaded successfully to ODS but there was
> activation failure due to <b>Communication error (
> RFC call ) occured .</b>
>
> Moreover , it is saying ..<b>Request
> REQU_1W740A2GOY7338IOPKOF2VC4F , data package 000001
> incorrect with status 9</b> .
>
> Could tell me the reason ? And some more details
> about status . Sometimes it is giving Status1 , 2 , 9
> . What does this mean ?
Maybe you are looking for
-
Purchase Requisition mandatory in Purchase Order
Hi I have a requirement to configure 5 document types and among that 2 documents types must have PR as mandatory and the remaining 3 document types will not have PR as mandatory. I've tried in screen variant but it is not working. kindly let me know
-
Delaying a function so ADF will get all the selected rows and run only 1 time ?
Hello, I'm using JDeveloper 12.1.2.0.0. I have a group of functions that are executed after i click on one or more rows, which is called: public void onDimProjectSelect(SelectionEvent selectionEvent) Whenever i shift-click some rows (lets say, for th
-
Lync Admin Users not Showing up in Lync client
I have added additional users to Lync. They show up in the Admin website but not in my lync client. Not sure how to add them?
-
Developing Web dynpro FPM application
Hi All I need to implement "Exit" functionality in my component similar to the standard ESS components which uses IFPM interface. 1) I created a view 2) Added a button 3) On click of button i called a method say "<b>cancel</b>" of Component Cntroller
-
Hi, I understand that each Hyper-v node in a cluster will have its own dynamic pool of MAC addresses that should be different between them. When a VM is started on a node it gets a MAC from this pool, if it's moved to another node and restarted it wi