Reg: Segment wise EC-CS consolidation

Hello,
I am working for EC-CS consolidation project. The client required company code wise Consolidation report & Segment wise consolidation report.
Can i know the process for Segment wise consolidation. how we get report for Segment wise consolidation.
Thanks & Regards,
Shiva cherukuri

Dear Stanley,
please create two different dimensions:
one for company consolidation with cons units = company codes
one for business area consolidation with cons units = business areas
Do not forget to mark the parent cons unit and create a top cons group.
Cheers,
David

Similar Messages

Profit Center & Segment wise payments

1. Looking for a document for enhancement of profit center & segment wise payments in F110 Payment Programe. exit\BADI ?
2. What exit is sutable for automatic bank determination in F110 payment programe

There is a workaround to use the field business place or payment method supplement.
E.g. You can use specific payment supplement method for specific profit centers. And then can populate that payment method supplement during the document posting - manually or via substitution.
Then you can select that payment method supplement in the free selection in F110.
Regards,
SDNer

Segment wise balance sheet

Hi All,
We are into SAP 6 version in IS retail.
We are not getting segment wise balance sheet report.
we have done the following
Document splitting is active.
Profit Centers is assigned to Cost centers
Segements are assigned to profit Centers
unable to get segment wise balance sheet and fixed assets are not reflected profit center wise balance sheet.
please advise...
Thanks!
Zia

Hi ZIA,
check:
SAP Customizing IMG -
> Financial Accounting ( New ) -
> Financial Accounting Basic Settings (New) -
> Ledgers -
> Ledger -
> Define Ledgers for General Ledger Accounting
Also refer the below link for more details
NEW GL & document spiltting:
Re: NEW GL & document spiltting
Default account assignment-New GL accounting:
Re: Default account assignment-New GL accounting
Pls assign point s as way to say thanks

Segment wise balances upload

Hi Experts,
My project go live will be happen next week end i have one issue my client is asking he want to upload segment wise balances but some of the balances are upload inter segment wise ex we have 4 segments in one company code at that time i want to upload the balances on behalf of one segment balances in another segment at that time there is no g/l account updated how can i upload this balances please give me idea. Appraisals are waiting,
Regards,
Nauma.

thank u for ur immediate reply but what i am asking is these are the initial balances so we cont post any transactions at least select any g/l also we want to post the segment balances without slecting the g/l accounts how can we do give me idea.
Regards,
Nauma.

How to restrict user to post document segment wise/Profit center wise

My client wants to restrict users segment wise to post account document.
we use documnet splitting segment wise.
Thanks
Chinmaya.

Hi
Check with your BASIS guy if authorization object is available for the field SEGMENT... There are some issues yet with this because it is not available in some T codes
If the same is not available, you can ask your ABAPer to create a Z authorization object for this field and write a small ABAP code in the exit RGGBR000 (FI validation)
Sample code is attached below to check auth for Plant in Internal order...ZCO_INTPORD was the Z auth object created...
CHECK i_aufk-bukrs IS NOT INITIAL.
CHECK i_aufk-werks IS NOT INITIAL.
AUTHORITY-CHECK OBJECT 'ZCO_INTORD'
         ID 'BUKRS' FIELD i_aufk-bukrs
         ID 'WERKS' FIELD i_aufk-werks
         ID 'ACTVT' DUMMY.
IF sy-subrc = 4.
MESSAGE e398(00) WITH 'You do not have sufficent Authorization'.
ENDIF.
Regards
Ajay M

To provide financial data with segment info for Statutory consolidation

Hello.
I'd like to know which is the better solution in order to provide company P/L and B/S data with segment info for Statutory consolidation purpose like SEM-BCS or BO-Finance.
(Segment info means like business division for disclosing)
Sometimes PCA accounting info is used and roll-up into FI-SL.
(FI posts Profit center directly or allocates into segment for consolidation)
Do you have any other way to provide financial data with segment from FI?
New GL is good solution??
Please kindly help.
Thanks,
SEM_BW

Hi
Development of New GL and Document splitting is based on to provide the solution for segment reporting to meet the local legal requirements and also to meet company aspirations. Create n number of segments for n number of business requirements.
Cheers
Srinivas

Document list segment wise

How we can view the list of documents posted/parked for a specific segment or profit centre for a date or from date to to date.
BSR

we have to configure that one es defnation segment wise . then only we can view the dacuments in segment wise caluculation repot profit center ke51

Segment wise splitting is not working- moving to dump

Hi Friends,
When posting to cash payments. I have activated New GL concept(Doc splitting segment wise).
The following systax error occured in the program SAPLFAGL_segment "Field "COPABBSEG_GLX" is unknown. it is neither in one of the specifile.
Doc splitting prpfot center wise working, same way configured as Segment wise splitting.
Regards,
Suresh

solved

Segment wise Depreciation

Hi,
Please let me know any reports to view depreciation and asset value by segment (ECC 6 - Document splittign activated)
Regards,
Sridevi

Hi
You can get depreciation profit center wise by using T code S_ALR_87011964 and put the sort key 0016.
If you want Segment wise report i think you have to create a new sort key in OAVI
Thanks
Ansuman

COPA Assessment Cycle - Segment Wise

Hello Friends,
Good Day!
I have created COPA Actual Assessment Cycle by T-Code KEU1. I have created around 5 Segments in that cycle. I want to execute the Assessment Cycle, but Segment Wise. I am trying to execute KEU5 and execute the Cycle. The assessment was properly as desired but for all Segment at once.
But if I want to execute this Cycle Segment Wise, is there any possible way to do that?
Many Thanks,
Pritesh Lodha

Dear Lodha,
Please try in the following manner which may suits your requirement:
Lock indicator available in Assessment cycles segment wise.
If you have many segments and want to run for few segments, you can use the lock indicator in assessment cycle T Code: KSU2
After locking the required segments you can run the assessment cycle using KEU5 by specifying the cycle name.
Cycle will consider the active segments only.
Regards,
Pavan Kumar Arvapally

Accounts Segmentation wise Authorizations possible or not?

Hi Experts
My clent needs authorisations for account segmentation wise
One branch accounts will not see other branch employees
Will it possible or not?
If it is possible, Tell me how to do this?
Prasad

Hi Prasad,
Check the thread
Re: ACCOUNT SEGMENTATION
Regards
Jambulingam.P

India Localiztion taxes balancing segment wise

Hi,
We are implementing Oracle Financials (AP,AR,FA,CM,Gl,PO&INV) for a service company. India Localization Service Tax & TDS are applicable. And, the requirement is B/S and P&L at Division Level (30 Devisions).But the Inventory Organization is only one.So, we can give only one balancing segment values while defining service tax regime tax accounts, which will defaluts to service tax account lines with this reason we can get exact b/s and p&l at the division level.
Kindly suggets me is there any way to fulfill this rquirement. Or should i have to define 30 inventory orgs which will increase my maintance and period closing activities.
This is the major rquirement for most of the service industries.
Thanks 'N' Regards
Rajesh

Reg : Project wise Budget.

Dear All,
Is it possible to give Proejct wise Budget estimation using Budget setup.
Waiting for your valuable response
thanks & regards
Venkatesh N

Hello Rajesh
I had the same requirement from business than you: to develop a solution which allows business to limit document addition basing in project budget limits. After much thinking and thanks to different tips from people on this forum (Nagarajan, Gordon Du, Kennedy T and Johan Hakkesteegt are some of the ones who most have help me on this) I have been able to develop a solution which meets business requirements.
First thing that you have to consider is which document types you want to be blocked from adding when a project budget is going to be exceeded. At our case we have decided to check Draft purchase orders and Purchase invoices addition.
Next step would be to determine the calculation to estimate the budget for a concrete project. This is the calculation that system has to do each time a Draft PO or an invoice is going to be added on system:
Project Budget > Open Draft POs + Open POs + Open PO GR + Purchase Invoices - Open Goods returns
Basing on it our solution consist on:
6 UDF in OPRJ table: one for indicating the budget of each project, the other five for each variable on the budget limit calculation (Open Draft POs, Open POs...)
5 querys to use it as formatted searches in those UDF OPRJ fields, so each one of this fields displays the correct cumulative value. For example Open POs UDF has a query as FMS which calculates the cumulative amount for each project on open purchase orders and so on.
5 TN querys intended to update automatically the OPRJ UDF values when a document is added.
2 TN querys intended to check if the addition of certain documents is going to cause a project overrun. One query is for checkin Draft PO docs addition and the other to check Purchase invoices addition
A UDT to include every project whose budget has to be checked. (Business doesn't need to limit all projects).
I can share the queries in case you think that this solution could be useful for your needs.
Thanks and regards

Segment wise Profit Center Reporting

Hi Gurus,
I would like to know how to customize Profit center accounting , so that i can take Balance sheet at Profit center Level.
if anybody can send me the configuration document ,It will be great help for me
[email protected]
Thanks in Advance,
Best Regards,
Ashish Jain.

Hi
Check with your BASIS guy if authorization object is available for the field SEGMENT... There are some issues yet with this because it is not available in some T codes
If the same is not available, you can ask your ABAPer to create a Z authorization object for this field and write a small ABAP code in the exit RGGBR000 (FI validation)
Sample code is attached below to check auth for Plant in Internal order...ZCO_INTPORD was the Z auth object created...
CHECK i_aufk-bukrs IS NOT INITIAL.
CHECK i_aufk-werks IS NOT INITIAL.
AUTHORITY-CHECK OBJECT 'ZCO_INTORD'
         ID 'BUKRS' FIELD i_aufk-bukrs
         ID 'WERKS' FIELD i_aufk-werks
         ID 'ACTVT' DUMMY.
IF sy-subrc = 4.
MESSAGE e398(00) WITH 'You do not have sufficent Authorization'.
ENDIF.
Regards
Ajay M

Segmentation in SAP B1 - comparison of segment-wise financial results

Dear Group,
We are in a trading industry using SAP B1 at our 15 outlets.. we have created 15 segments in SAP B1 to know the actual performance of each segment.
i would like to know how to get comparison analysis of segments in sap b1.. As p&l , b/s allow to choose only one segment. We can get the report of the selected segment at a time but we can not choose more than one segment to compare the results for analysis purpose..

Hi Zal
If this person was an "Expert" on SAP Business One then the only way they would have changed dates would probably be directly in SQL itself. The best way to determine this would be to hope that they slipped up somewhere and forgot to change a particular date in let's say one specific table.
For invoices, start with the post date, doc date & create date. Then check each of these to the OJDT/JDT1 tables for any discrepancies. Next check the ADOC/ADO1 table for multiple instances on the invoice. If only 1 instance then check the create date, time & user as well as the aforementioned dates between OINV/INV1 & ADOC/ADO1. If multiple instances, check the dates from 1 instance to the next (This will indicate dates being changed in the system).
Next check the same dates against OINM table. If any of the dates do not tally then the SQL was changed directly.
Hope this helps. Let me know if you need further assistance.
Kind regards
Peter Juby

Reg: Segment wise EC-CS consolidation

Similar Messages

Maybe you are looking for