Reg Soap to Soap scenario

Hi...
I am doing soap to soap scenario. Can you please provide the details for doing the soap to soap scenario. I want to provide the input as soap request. Xi would take the soap request and process the request and provide the repsonse.
Pleasehelp out in doing the above scenario.

HI,
Invoke Webservices using SAPXI
sender Soap Adapter.
1) Create DT,MT,MI( Syncr,Outbound)
2)Configure ID
3Create Webservice (ID->Tools->Define Webservice , Save it as .wsdl)
Give that wsdl to the sender system
REceivere Soap Adapter
1) Need WSDl file from receiver system
2)mport Wsdl file from External definitions in IR
3) Create Message Interface ( Synch,Inbound)
4) Configure ID
ID :
Sender , Receiver adapter : Soap Adapter
Regards,
Jayasimha JAngam

Similar Messages

Reg:soap-xi-rfc scenario

In soap-xi-rfc scenario if the RFC function modules processed in R/3 system with some errors then , how to handle the errors , do we need to create the error structure in xi by using the fault message type or there is any other way to handle the application errors?
pls help with suitable answers
regards
chandrakanth.k

Hi,
The best way to go with ur senario is make it as SOAP XI Proxy.....in proxy u can catch the errors using the fault mesage typw and if u want to validate the data that can be done......if u want to send the error report that can be done in proxy....were u can collect all the errors and send they to the enduser or display them in Application server...
Think this option if possible....
check somelinks on fault mesage.
ExchangeFalultData & ExchangeLogData
/people/shabarish.vijayakumar/blog/2006/11/02/fault-message-types--a-demo-part-1
/people/shabarish.vijayakumar/blog/2006/11/02/fault-message-types--a-demo-part-1
http://help.sap.com/saphelp_nw2004s/helpdata/en/5d/a45c3cff8ca92be10000000a114084/content.htm
Asynchronus RFC exception handling
XI Alerts are not getting triggered from proxy servers
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/ee5bc490-0201-0010-e9b5-
a258cf083bca
/people/sap.user72/blog/2006/01/16/xi-propagation-of-meaningful-error-information-to-soap-client
Fault Message
Regards,
Phani
Edited by: phani kumar on Mar 12, 2008 1:05 PM

SOAP to RFC scenario prolem

Hello Guru's
 Im trying the basic SOAP TO RFC scenario, in which RFC is SXIDEMO_AIRL_FLIGHT_CHECKAVAIL
and the out bound interface consists of only basic feilds i.e.
REQUEST MESSAGE TYPE : AirlineID
 ConnID
 Fldate
RESPONSE MESSAGE TYPE : Ecnofree
 Bussfree
 Firstfree
and no fault message type.
i created the scenario with out any errors, and i defined webservies in ID with the following URL
http://starxi:50000/XISOAPAdapter/MessageServlet?Channel=:SXI_BS_SOAPRFC_SENDER:SOAP_RFCSENDER
it is according to the following syntax
htt://<xi server>:<J2EE Port>/XISOAPAdapter/MessageServlet?channel=:<sender business system>:communication channel.
But im not able to post SOAP request to the xi server. it is saying following error
"SOAP Request cannot be posted <with url > 403"
403 is the error code.
please can anyone help me in overcoming the above problem. and where iam wrong.
Thanks in advance
arjun

Hi!
Please check once again reg SOAP URL while generating the WSDL.
[http://<HOST name:5<Port>00/XISOAPAdapter/MessageServlet?channel=:<Channel Name>:<Adapter Name>]
[Re: Using SOAP Sender adapter in PI 7.1]
1. Check whether your SOAP URL s correct or not which you are giving in the receiver SOAP adapter
2. Also check you are giving the SOAP action in the receiver SOAP adatper correctly or not.
3. Finally check the SOAP service is activei or not in SAP>BC>XI-->SOAP in ABAP stack
4. Since FIle is only for ASYN comm and while using FILE for sync interface you need to pass module paramters in the Sender File CC
ERROR 403 means::
This error will be comming mostly in the synch scenarios like SOAP to RFC - SOAP and FIle to RFC--FILE
when the target system is down or service is inactive.
Error: HTTP 403 Forbidden
Description: The server understood the request, but is refusing to fulfill it
Possible Tips:
Path sap/xi/engine not active
u2022 HTTP 403 during cache refresh of the adapter framework - Refer SAP Note -751856
u2022 Because of Inactive Services in ICF u2013Go to SICF transaction and activate the services. Refer SAP Note -517484
u2022 Error in RWB/Message Monitoring- because of J2EE roles u2013 Refer SAP Note -796726
u2022 Error in SOAP Adapter - "403 Forbidden" from the adapter's servlet. u2013Because of the URL is incorrect or the adapter is not correctly deployed.
Regards::
Amar Srinivas Eli

Reg: Sending a Soap Request

Hi,
I am doing a Soap to RFC Scenario. I created a webservice in WebDynPro using NWDS and deployed that in local machine. I would like to send a soap request. How can I send it, if I have only NWDS??

Hi,
>>> I created a webservice in WebDynPro using NWDS and deployed that in local machine
There are 2 ways while dealing with a webservice (same with any other adapters)
a. Webservice at the sender side.
b. Calling (invoking) the serivce of an existing webservice.
If you want to create a scenario as in option a
In this case, the sender is not actually a webservice, rather it is a client (webservice client) that invokes the webservice. The actual webservice in this case is your XI server. But again XI server is not a webservice. All XI does is understands the webservice client request and converts it to a XI message and does the operation.
If you wish to do such a scenario, there are guides available in SDN, (How to expose your outbund interface as webservice, How to Soap Adapters). Follow them.
Best Regards,
Jai Shankar

File to Web service (SOAP) to File scenario with out BPM in PI 7.1

Hi All,
I have scenario File to Web service (SOAP) to File scenario with out BPM.i am getting the below error:
1) Error MP: unexpected exception caught com.sap.aii.af.service.cpa.impl.exception.CPAObjectKeyException: Value of key must not be null: ObjectId
2) Error ROB: error during processing: com.sap.aii.af.lib.mp.processor.ModuleProcessorException: Processing Error
PI server is 7.1 with SP:8
I have configured the scenario like this
1) 2 File channels - Sender & Receiver ,1 RFC channel - Receiver. We need to note that, the additional Module parameters need to be added only for sender File channel
2) Created Sender Agreement
3)Created Receiver Determination
4)Created Interface Determination
5)Created Receiver Agreement
Regards,
Ramesh

Hi,
Thanks for your reply!!
My Scenario is File to SOAP to File.
Configred modules in Sender channal below:
Prcessing sequence:
Number       Module Name                                        Module Key
1..........       AF_Modules/RequestResponseBean.......1
2..........       CallSapAdapter..........................................2
3..........       AF_Modules/ResponseOnewayBean.......3
Module Configuration:
Module Key                                       Parameter Name                                       ParameterValue
1                                                        passThrough                                            true
3                                                        receiverChannel                                       receiverChannel name
3                                                        receiverService                                        receiverService name
please tell any more confiration requered.
Regards,
Ramesh

SOAP TO JDBC scenario: calling stored procedure which will return the value

Hi
I have Soap To Jdbc scenario in which I am going to call the Stored Procedure at target side which will be executed and it is going to return the result set .
Result contains following values.
return code as ( 0 Or 1) and also specific exception message if its return code as 1.
Could you suggest me the way by which I can handled this return code and send it back to the Sap PI system then the same thing is directed the to SMTP server for sending mail to consern person.
Regards
Kumar

The OUT parameters of stored procedure will be returned as response. Where exactly are you facing the proble? Here is a complete walkthourgh
/people/luis.melgar/blog/2008/05/13/synchronous-soap-to-jdbc--end-to-end-walkthrough
In your case, you don't want response at sender. Instead you want to mail it. For this you may use BPM to design your scenario with following steps
Receive (to receive data from sender)
Send Sync (to stored procedure and get response)
Send Async (to mail receiver)
Regards,
Prateek

Error in SOAP to file scenario

Hey guys
i m doing a SOAP to File scenario and getting the following error.
<SAP:Stack>"COMMUNICATION FAILURE" during JCo call. Error opening an RFC connection.</SAP:Stack>
any idea where should i look ?
thanx
ahmad

Hey
i m still getting a red flag in MONI,the error is
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="MAPPING">JCO_COMMUNICATION_FAILURE</SAP:Code>
<SAP:P1>Error opening an RFC connection.</SAP:P1>
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>"COMMUNICATION FAILURE" during JCo call. Error opening an RFC connection.</SAP:Stack>
<SAP:Retry>A</SAP:Retry>
</SAP:Error>
i checked my mapping by copyin payload from MONI,its working fine.
thanx
ahmad

SOAP to Proxy scenario communication error

Hi Friends,
 Now i am developing SOAP to Proxy scenario, i am testing WSDL file using SOAP UI software and i am getting an error in SOAP UI tool.
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<html>
<head>
<title>Error Report</title>
<style>
td {font-family : Arial, Tahoma, Helvetica, sans-serif; font-size : 14px;}
A:link {color : #0059AA;}
A:visited {color : #999999;}
A:active {color : #999999;}
</style>
</head>
<body marginwidth="0" marginheight="0" leftmargin="0" topmargin="0" rightmargin="0">
<table width="100%" cellspacing="0" cellpadding="0" border="0" align="left" height="75">
<tr bgcolor="#FFFFFF">
<td align="left" colspan="2" height="48"> 403 Forbidden</td>
</tr>
<tr bgcolor="#3F73A3">
<td height="23" width="84"><img width=1 height=1 border=0 alt=""></td>
<td height="23"><img width=1 height=1 border=0 alt=""></td>
<td align="right" height="23">SAP NetWeaver Application Server </td>
</tr>
<tr bgcolor="#9DCDFD">
<td height="4" colspan="3"><img width=1 height=1 border=0 alt=""></td>
</tr>
</table>
 
 Error: You are not authorized to view the requested resource.
 <a href="https://wiki.sdn.sap.com/wiki/x/wIN3Cw">SAP Technology Troubleshooting Guide</a>
<table>
<tr>
<td valign="top"> Details:</td>
<td valign="top"><PRE>No details available.</PRE></td>
</tr>
</table>
</body>
</html>
I have tried with the same WSDL earlier it was working fine, now its not working and throwing the above error.
Kindly suggest me to overcome from this issue.
Regards,
Senthil.

Hi Senthil,
Try with the authentication preemtive. Also, check your URL because that error seems that you are accessing to wrong PI section or your user has not the enough credentials, try with PIAPPLUSER or with the same roles that this user.
Regards.

"SOAP:Fault" in scenario with ABAP proxy client

Hello,
I realized the scenario CRM40_Basis620(ABAP proxy client)->XI->File.
XI:
The sender communication channel is a XI adapter (Parameters: HTTP 1.0, XI 3.0, Integration Server, Security profile unchecked, Security level - HTTP).
CRM:
The proxy generation is ok.
SLDCHECK is ok.
All RFC destinations are ok.
APPINT_200_620 for CRM was installed and configured well (I think so, but...).
When I ran the ABAP proxy client on CRM, sxmb_moni(CRM) returned the text for the XML Message (Display-CallIntegrationServer-Payloads-TraceDocument):
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- <SAP:TraceHeader xmlns:SAP="http://sap.com/exchange/MessageFormat">
<Trace level="1" type="B" name="CL_XMS_TROUBLESHOOT-ENTER_PLSRV" />
<Trace level="1" type="T">****************************************************</Trace>
<Trace level="1" type="T">* *</Trace>
<Trace level="1" type="T">* *</Trace>
<Trace level="1" type="T">XMB entry processing</Trace>
<Trace level="1" type="T">system-ID = EST</Trace>
<Trace level="1" type="T">client = 300</Trace>
<Trace level="1" type="T">language = E</Trace>
<Trace level="1" type="T">user = BABKIN_RA</Trace>
<Trace level="1" type="Timestamp">2007-08-06T13:55:12Z</Trace>
<Trace level="1" type="T">* *</Trace>
<Trace level="1" type="T">* *</Trace>
<Trace level="1" type="T">****************************************************</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-CALL_UC_EXECUTE" />
- 
<Trace level="1" type="T">Message-GUID = DC4424A659314CF18F500002A541D0E7</Trace>
<Trace level="1" type="T">PLNAME = SENDER</Trace>
<Trace level="1" type="T">QOS = EO</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PIPELINE_ASYNC" />
- 
<Trace level="1" type="T">Get definition of external pipeline = SENDER</Trace>
<Trace level="1" type="T">Get definition of internal pipeline = SAP_SENDER</Trace>
<Trace level="1" type="T">Generated prefixed queue name = XBTS0004</Trace>
<Trace level="1" type="T">Setup qRFC Scheduler OK!</Trace>
<Trace level="1" type="T">----
</Trace>
<Trace level="1" type="T">Going to persist message + call qRFC now...</Trace>
<Trace level="1" type="T">NOTE: The following trace entries are always lacking</Trace>
<Trace level="1" type="T">- Exit WRITE_MESSAGE_TO_PERSIST</Trace>
<Trace level="1" type="T">- Exit CALL_PIPELINE_ASYNC</Trace>
<Trace level="1" type="T">Async barrier reached. Bye-bye !</Trace>
<Trace level="1" type="T">----
</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_TO_PERSIST" />
- 
<Trace level="1" type="B" name="CL_XMS_MAIN-PERSIST_READ_MESSAGE" />
<Trace level="1" type="T">Note: the following trace entry is written delayed (after read from persist)</Trace>
<Trace level="1" type="B" name="SXMS_ASYNC_EXEC" />
- 
<Trace level="1" type="T">----
</Trace>
<Trace level="1" type="T">Starting async processing with pipeline SENDER</Trace>
<Trace level="1" type="T">system-ID = EST</Trace>
<Trace level="1" type="T">client = 300</Trace>
<Trace level="1" type="T">language = E</Trace>
<Trace level="1" type="T">user = BABKIN_RA</Trace>
<Trace level="1" type="Timestamp">2007-08-06T13:55:12Z</Trace>
<Trace level="1" type="T">----
</Trace>
- <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PIPELINE_SYNC">
<Trace level="1" type="T">Get definition of pipeline PID= SENDER</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-LOOKUP_INTERNAL_PL_ID" />
- <Trace level="1" type="B" name="PLSRV_CALL_INTEGRATION_SERVER">
<Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV" />
- 
<Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV_LOCAL" />
- 
- <Trace level="1" type="B" name="CL_XMS_PLSRV_CALL_XMB-ENTER_PLSRV">
<Trace level="1" type="T">URL for integration server read from global configuration</Trace>
<Trace level="1" type="T">URL= http://SRMDEV.oao.sng:8011/sap/xi/engine?type=entry</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-SET_TECHNICAL_ROUTING_PROPERTY" />
- <Trace level="1" type="B" name="CL_XMS_PLSRV_CALL_XMB-CALL_XMS_HTTP">
<Trace level="1" type="System_Error">HTTP-client: error response= <SOAP:Envelope xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/"> <SOAP:Header> </SOAP:Header> <SOAP:Body> <SOAP:Fault xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/"><faultcode>SOAP:Client</faultcode><faultstring>Error during conversion of XI message</faultstring><faultactor>http://sap.com/xi/XI/Message/30</faultactor><detail><SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1"><SAP:Category>XIServer</SAP:Category><SAP:Code area="SECURITY">INBOUND_SECURE_LEVEL</SAP:Code><SAP:P1>DC4424A659314CF18F500002A541D0E7</SAP:P1><SAP:P2/><SAP:P3>HTTP</SAP:P3><SAP:P4/><SAP:AdditionalText/><SAP:ApplicationFaultMessage namespace=""/><SAP:Stack>Message DC4424A659314CF18F500002A541D0E7 was sent with ''. Channel configuration, however, requires 'HTTP' </SAP:Stack></SAP:Error></detail></SOAP:Fault> </SOAP:Body> </SOAP:Envelope></Trace>
</Trace>
<Trace level="1" type="System_Error">Exit XMB because of system error!</Trace>
<Trace level="1" type="System_Error">System-Error: HTTP.HTTP_STATUS_CODE_NEQ_OK</Trace>
<Trace level="1" type="System_Error">HTTP status code 500 : Error during conversion of XI message</Trace>
<Trace level="1" type="B" name="CL_XMS_TROUBLESHOOT-ENTER_PLSRV" />
</SAP:TraceHeader>
I think the main problem is the parameter "HTTP Security level" for the channel, but not sure.
Does anybody know where to find a solution?
Regards,
Roman

Hi Roman
There is no need for an XI adapter for client proxy.... we only use that for server proxies.
Vaibhav

Soap to proxy scenario Getting exception caught with cause error

Hi Experts,
MY scenario is soap to proxy i am getting below exception message in advanced engine configuration in ICO.
OAP: request message entering the adapter with user J2EE_GUEST
09/10/2014 11: 06: 03 346 XI Information Packaging (Bulk Mode) is not Enabled, Proceeding to the Normal Processing.
09/10/2014 11: 06: 03 346 XISOAP Information: Received an XI message for processing
09/10/2014 11: 06: 03 598 Error SOAP: response message contains an error XIAdapter / parsing / ADAPTER.SOAP_EXCEPTION - soap fault: Error in processing the Web Service; Other details in the error log of the Web Service from the provider side (Registration UTC 20,140,910,110,603; 6EDA38E4CE67F1B3B939005056882C3A transaction ID)
09/10/2014 11: 06: 03 598 Information SOAP: completed the processing
OAP: response message contains an error XIAdapter / parsing / ADAPTER.SOAP_EXCEPTION - soap fault: Error in processing the Web Service; Other details in the error log of the Web Service from the provider side (Registration UTC 20,140,910,110,603; 6EDA38E4CE67F1B3B939005056882C3A transaction ID)
09/10/2014 11: 06: 03 598 Information SOAP: completed the processing
09/10/2014 11: 06: 03 598 Information SOAP: response message to continuing 7477aafa-38da-11e4-beed-00000028af0a
09/10/2014 11: 06: 03 599 Error MP: exception caught with cause com.sap.engine.interfaces.messaging.api.exception.MessagingException: SOAP: response message contains an error XIAdapter / parsing / ADAPTER.SOAP_EXCEPTION - soap fault: Error in processing the Web Service; Other details in the error log of the Web Service from the provider side (Registration UTC 20,140,910,110,603; 6EDA38E4CE67F1B3B939005056882C3A transaction ID)
09/10/2014 11: 06: 03 599 Error SOAP: error occured: com.sap.engine.interfaces.messaging.api.exception.MessagingException: SOAP: response message contains an error XIAdapter / parsing / ADAPTER.SOAP_EXCEPTION - soap fault: Error in processing the Web Service; Other details in the error log of the Web Service from the provider side (Registration UTC 20,140,910,110,603; 6EDA38E4CE67F1B3B939005056882C3A transaction ID)
payload is contains some special charters in which is in protiguse language
example.
• AWPJ SERV DE TERCERIZ and
dot is the special char
same payload while testing using sproxy tcode dot "•" is converting in " # "symbol and with out error its successfully updating the database in ECC.
while testing using the same payload using soap ui removing the dot symbol from the field its successfully processing and updating the database.
is this interface is failing in PI level ? or ECC i am not getting dump in ecc.
is there any special character conversation in sap pi level.
where this message exactly failing is in PI level or in ECC level?
Help us find the solution.

Hi Ravinder,
When you mark the option Do not use SOAP envelope the adapter will not generate the SOAP envelope therefore you need to set an extra mapping in the Request to wrap the SOAP envelope. For example with XSL:
<?xml version="1.0" encoding="UTF-8"?>
<xsl:stylesheet version="1.0" xmlns:xsl="http://www.w3.org/1999/XSL/Transform">
<xsl:output method="xml"/>
 <xsl:template match="/">
 <SOAP:Envelope xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/">
 <SOAP:Header/>
 <SOAP:Body>
 <xsl:copy-of select="/"/>
 </SOAP:Body>
 </SOAP:Envelope>
 </xsl:template>
</xsl:stylesheet>
Later in the response you will have the SOAP envelope tags. (You can do a first try without java mapping only to see in the monitoring the response with the junk character).
When you determine the junk character you can try to use and to modify the next java mapping SAP PI - Deciphering apostrophes in XML - Process Integration - SCN Wiki to deal with your problem.
Hope this helps.
Regards.

JCO problem in SOAP to file scenario

Hey guys
i m doin a SOAP to file scenario and getting a JCO error in moni,the status of my queue in SMQ2 is SYSFAIL,when i check the TCP/IP connection in SM59 i find error in two places
AI_DIRECTORY_JCOSERVER and AI_RUNTIME_JCOSERVER .when i test connection for both of them i get the followin error "Error opening and RFC connection".
is this error dues to some server problem of something wrong in my scenario.?
the SOAP adapter in RWB is green.
i tried to unlock and delete the queue in SMQ2 but when i execute my scenario again,it gets SYSFAIL error.
thanx
ahmad

Hi,
If you restart the J2ee engine, it will work.
But The error may because of many reasons
-Might be because of lots of messages are to be processed simultaneously.
-Increasing the number of processes in VisualAdmin (VisualAdmin>JCO RFC Provider>AI_RUNTIME_<SID>) and see if that helps.
-This SAP Note may help u -709140.
Hope this helps,
Regards,
Moorthy

Soap to rfc scenario error

Hi PI Experts,
For the first time i was doing soap to rfc scenario. I have created all the objects in the ID and in the IR and also created a web service from ID an then i have saved the wsdl in my system. I have uploaded the wsdl in altova xml spy and tested it but i got an error like 'no channel specified'. and also got an error 'unable to post the file'.
so kindly please help me to solve this scenario.
Thanks & Regards,
B.Srinivas Prasad.

I have uploaded the wsdl in altova xml spy and tested it but i got an error like 'no channel specified'. and also got an error 'unable to post the file'.
Make sure that its in the below format :
From SAP help :
http://host:port/XISOAPAdapter/MessageServlet?channel=party:service:channel
Under party:service:channel enter the party name, the service name, and the name of the communication channel. If no party has been created, enter the following: channel=:service:channel
and check Sender Soap Channel Status is it activated/not and check Cache Status

Response from PI in SOAP to SOAP Scenario

Hi,
My scenario is Soap to SOAP sending purchase orders. they want acknowledgement from PI whether PI received the message or not in the form of SOAP response.
sender system not expecting the response after the message processing in receiver system, they are expecting the response when PI receives message from them.
As any way they receive HTTP200 OK acknowledgement is it necessary that to send the SOAP response from PI by developing BPM?
Is it a good way of doing it?
Is any other way of doing it?
Your suggestions will be helpful to me.
Thank you.
Santhi.

Hi Santhi,
Please refer to SAP Note 856597 - SOAP Adapter FAQ Question number 2
2. Sender Asynchronous Calls
o Q: What are the correct sender options for asynchronous calls?
When the client sends a SOAP message and checks if the response is
an HTTP 200 response message with an empty soap envelope or an HTTP
202 response message with no content, the quality of service with
AtLeastOnce can be realized. In this case, the client must resend
the message until such a successful response is returned. When the
message successfully accepted by the adapter, an HTTP 200 response
with an empty SOAP envelope or an HTTP 202 response message with no
content is returned.
You don't have to do anything. When an async message is sent, PI will either reply with a 200 with an empty SOAP Envelope or an HTTP 202 with no content . That will serve as your acknowledgement.
Regards,
Mark

Business systems for Soap to file scenario

Hi Experts,
I am working on a soap to file scenario.Which type of business systems shall i create i.e Third party,As ABAP,As Java etc.Please suggest.
Thanks
Veeru

Hi,
Normally Business systems are created in SLD when you are provided with relevant system details. A business service is used in case of the system being an abstract unit.
In your case, it is better to go for Business service because you generally don't have such details for third party system.
Just go through this link for more understanding...
Difference between Business System and Business Service
Regards,
Chandra

Doubt Regarding SOAP to File Scenario

Hi All,
I am trying to create a SOAP to File scenario .These are the following things I have done so far :
IR - 2 datatypes ( 1 for soap message and 1 for file message )
       2 message types for the corresponding messages
      2 Message interfaces, both are asynchronous
      1 message mapping
      1 interface mapping
ID- 2 business systems (1 to send soap, 1 to recieve file )
    2 communiccation channel (soap sender, file receiver )
soap sender adapter parameters - Interface Name - Message interface for soap message
                                                  interface namespace - scenario namespace
Then, i generated a wsdl file to expose the outbound message interface for soap message as a web service, url for message interface : http://host:port.XISOAPAdapter/MessageServlet?:service:channel.
After generating the wsdl file, i imported it in external definition
Could anyone plz. tell me, is this the right approach to creat this scenario ? how can I test this scenario?using altova spy ?

Hi,
The URL you have mentioned to genarate WSDL is not a valid one
http://host:port.XISOAPAdapter/MessageServlet?:service:channel.
Check the below valid URL
http://host:port/XISOAPAdapter/MessageServlet?channel=:service:channel.
You no need to import this to the Eexternal Definition as you already have DT,MT and MI, Any way this dosn't make any difference.
You can use SOAPGUI Tool to test:
->Create New Project -> provide WSDL you have genarated.
->Select Request and provide username and password and click the green button on top(Submit request to end URL).
Using altova spy:
Select SOAP Menu->Create New SOAP Request and provide your WSDL file and
SOAPMenu->Send Request To Server
Then you will get response..
Regards,
Prasanna

Reg Soap to Soap scenario

Similar Messages

Maybe you are looking for