Reg : SYN JDBC

Hi Experts,
I have little confusion in designg below scenario.I request experts to provide valuable input
I have 2 request from ECC
1. To reteive data from Oracle table (select *)
2. To reteive data based on specfic date range
Req from ECC can we have clien proxy to this??
The response from JDBC adapter need to be updated in some SAP table.
Design : Can we have sender XI adapter and receiver JDBC adapter.Please let me apporiate way to design the interface
Thanks for your help
Regards,
Dinesh

HI,
Design : Can we have sender XI adapter and receiver JDBC adapter.Please let me apporiate way to design the interface
Req from ECC can we have clien proxy to this??
The response from JDBC adapter need to be updated in some SAP table.
your scenario is like sap->jdbc->sap
so as per my knowledge you need to use Jdbc lookup in mapping leval that is very simple .
Please gothrough this below links:
How to use JDBC Lookup in PI 7.1 ?
SAP PI 7.1 Mapping Enhancements Series: Graphical Support for JDBC and RFC Lookups
http://help.sap.com/saphelp_nwpi71/helpdata/en/33/1ec6ced273493a993a80c2301c03da/frameset.htm
thanks,

Similar Messages

Query to be executed at Syn JDBC Receiver

Dear Freinds,
I am facing with this issue, i am passing a Native SQL Query as string from Syn Proxy to Syn JDBC with a key field as place holder.
As per my understanding place holder field should have the same as the once used in Native SQL Query. In the query its prefixed & suffixed with $. Correct ?
Also in the action field i have put SQL_QUERY correct ?
I am passing a Select Query (join query). In the query i have same conversion functions for date manipulations which comes within ' ' (single quotes). This quotes changes to '
What could be the problem. In the Communication channel under Processing tab in SQL Syntax parameters (Escape symbol for apostrophe) what should be given ?
Based on the execution of the Select query some fields are fetcehd from Oracle table. This will be response message from JDBC to Proxy.
But i am getting error as '' Invalid SQL stmt" . What could be the problem. How to rectify.
Please give me soultion for the above questions.
Thanks & Regards
K.Ramesh

Dear Friends,
I have done the same thing. We r using PI 7.1.
I have Sync Proxy -> Syn JDBC . I tried to execute a simple query at the JDBC adapter by sending it through *access* field in the XML structure.
This is the input
<?xml version="1.0" encoding="UTF-8" ?>
- <ns0:CoilNoReceive xmlns:ns0="urn:essar-com:production:shearslitpoconfirm">
- <stmt>
- <TABLENAME action="SQL_QUERY">
<access>SELECT coil_no,PARTS_ACT FROM P_INV where fac_index <> 6 and fac_index <>7 and rownum<5</access>
</TABLENAME>
</stmt>
</ns0:CoilNoReceive>
I am getting this error msg..
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
<SAP:Category>XIAdapterFramework</SAP:Category>
<SAP:Code area="MESSAGE">GENERAL</SAP:Code>
<SAP:P1 />
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText>com.sap.engine.interfaces.messaging.api.exception.MessagingException: Error 'java.sql.SQLException: ORA-00900: invalid SQL statement ' executing service raw2sql with SQL statement '<?xml version="1.0" encoding="UTF-8"?> <ns0:CoilNoReceive xmlns:ns0="urn:essar-com:production:shearslitpoconfirm"><stmt><TABLENAME action="SQL_QUERY"><access>SELECT coil_no,PARTS_ACT FROM P_INV where fac_index <> 6 and fac_index<>7 and rownum<5</access></TABLENAME></stmt></ns0:CoilNoReceive>'</SAP:AdditionalText>
<SAP:Stack />
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
What could be the problem. Reply ASAP.
Thanks
K. Ramesh

Need help reg sender JDBC adapter

Hi,
I am having a requirement like, i need to fetch the data from two data base tables. and after fetching the data, i need to update those two tables.
For selecting the data from two tables, two select statements i need to write, how i can give two select statements in sender JDBC comm channel.
In sender JDBC channel, only one update query we can give...how i can update two tables?
Regards,
Venkata Ramana.

Hello Venkat,
For your requirement, go for stored procedure and find the below thread.
Fetching data from JDBC without using JDBC sender adapter
Re: Executing an Oracle Stored Procedure from Sender JDBC adapter
Re: Sender JDBC adapter not picking up data
Re: Retrive data from two diffirent tables
hope this will help you
Thanks,
Venky

Info reg reciever JDBC adapter's driver and connection

Hello,
I have following questions related to JDBC receiver adapter.
1. can I supply jdbc driver and jdbc connection dynamically to supply the DB parameters dynamically?
2. if I cant supply dynamically, how do i achieve this purpose?
3. What are the receiver adapter parameters of JDBC receiver adapter that i can change dynamically?
thanks and regards,
Nikhil.

Hi,
To install JDBC driver follow the how to guide.
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/xi/xi-how-to-guides/how%20to%20install%20and%20configure%20external%20drivers%20for%20jdbc%20and%20jms%20adapters.pdf
Configuration of JDBC Adapter for SQL Server
JDBC Driver = com.microsoft.jdbc.sqlserver.SQLServerDriver
Connection = jdbc:microsoft:sqlserver://hostname:<port>;DatabaseName=<DBName>
UserID and Password.
If the connection is not working find the correct port number.
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/40b92770-db81-2a10-8e91-f747188d8033
JDBC- X I - R/3 Scenario
/people/bhavesh.kantilal/blog/2006/07/03/jdbc-receiver-adapter--synchronous-select-150-step-by-step
/people/sap.user72/blog/2005/06/01/file-to-jdbc-adapter-using-sap-xi-30
Please check the driver path as mentioned below.
JDBC Driver : sun.jdbc.odbc.JdbcOdbcDriver
Connection:jdbc:odbc:Driver={Microsoft Access Driver (*.mdb)};DBQ=//location of DB table.mdb;
No JDBC driver required.
Receiver JDBC scenario MS access - /people/sameer.shadab/blog/2005/10/24/connecting-to-ms-access-using-receiver-jdbc-adapter-without-dsn
follow this thread
Re: Problem when connecting to MS Access through JDBC Adapter.
SAP Note 850116 has details
Thanks,
Satya Kumar
Reward Points If it is Useful..

JDBC syn to proxy syn Scenario

Hi firnends,
JDBC (syn) to Proxy (Sys)
I need to pick the data from JDBC and status need to update back from ECC (proxy).
What are the best possible soluctions ? With or without BPM ?
Pls reply back.
Regards,
vasudeva
Edited by: vasudeva gembali on Oct 7, 2010 7:40 AM

Hi friends,
I started my scenario like
JDBC syn - proxy syn - JDBC without BPM using Using Request Response Bean Module
as in link
http://wiki.sdn.sap.com/wiki/display/XI/UsingRequestResponseBeanModuleinFILE+Adapter
. Now i am getting the issue like
JDBC is picking the data and can't update the status SET = 1 instead of 0.
It was working when it was asynch.
2. Do i need to create Receiver determination or receiver agreement two times ?

File to JDBC to File Scenario

Dear Bhavesh,
I am doing a File to JDBC to File Scenario from your reference blog https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/3928. [original link is broken] [original link is broken] [original link is broken] [original link is broken] This scenario is same as File to RFC to File scenario I believe. The only change I found is in Message Interface.
The Message Interface used here are:
1.     OB File Request
2.     OB Abs File Request
3.     IB File Response
4.     IB Abs File Response
5.     Abs Syn File Request File Response
6.     Abs Syn JDBC Request JDBC Response.
I am able to get the response from JDBC but while mapping to file I am getting mapping error. In fact I have followed ur Blog as it is.
The IP steps are:
Receive Step , Syn Send (Abs Syn File Request File Response) Step , Send Step.
Could you please help me out, if you have time .
Thanks in advance.
Shaik

Hi ,
Sorry for pointing you the thread.
I have created the IR as it is in File RFC File Scenario, but I have created Abs Syn Message Interface for JDBC request and Response.
I have two Abs sync Message Interface and two mapping programs, namely
Source Interface:
Abs Sync Message Interface
   File Request
   File Response
Target Interface:
Abs Sync Message Interface
JDBC Request
JDBC Response
Mapping Interface:
File Request to JDBC Request
JDBC Response to File Response.

Transalate JPQL query to be SQL

I'm using toplink. I wonder if there is tool to translate toplink JPQL query to be SQL in developer? what I'm looking for is I can type in a JPQL query, IDE will be able to show me the translated SQL. is this can be done in jdeveloper?
Thanks

Dear Friends,
I have done the same thing. We r using PI 7.1.
I have Sync Proxy -> Syn JDBC . I tried to execute a simple query at the JDBC adapter by sending it through *access* field in the XML structure.
This is the input
<?xml version="1.0" encoding="UTF-8" ?>
- <ns0:CoilNoReceive xmlns:ns0="urn:essar-com:production:shearslitpoconfirm">
- <stmt>
- <TABLENAME action="SQL_QUERY">
<access>SELECT coil_no,PARTS_ACT FROM P_INV where fac_index <> 6 and fac_index <>7 and rownum<5</access>
</TABLENAME>
</stmt>
</ns0:CoilNoReceive>
I am getting this error msg..
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
<SAP:Category>XIAdapterFramework</SAP:Category>
<SAP:Code area="MESSAGE">GENERAL</SAP:Code>
<SAP:P1 />
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText>com.sap.engine.interfaces.messaging.api.exception.MessagingException: Error 'java.sql.SQLException: ORA-00900: invalid SQL statement ' executing service raw2sql with SQL statement '<?xml version="1.0" encoding="UTF-8"?> <ns0:CoilNoReceive xmlns:ns0="urn:essar-com:production:shearslitpoconfirm"><stmt><TABLENAME action="SQL_QUERY"><access>SELECT coil_no,PARTS_ACT FROM P_INV where fac_index <> 6 and fac_index<>7 and rownum<5</access></TABLENAME></stmt></ns0:CoilNoReceive>'</SAP:AdditionalText>
<SAP:Stack />
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
What could be the problem. Reply ASAP.
Thanks
K. Ramesh

Reg: How to Stop Polling of JDBC Adapter without Scheduling the adapter

Dear Gurus,
Here I am having one requirement. My clients wants to send data from JDBC adapter (ORcale System table) to R3 system via RFC.
His Requirement::
1. He is not telling the time of data flow from Oracle server so that based on that we can schedule the adapter in the Communication Channel monitoring (Availablitiy Time Planning) or Else we can Schedule by deciding the setting of the polling interval time.
2. He is telling that When ever he waants to send the data he will place one dummy file in the File Adapter FTP location so that it will became an Indication for u to poll the jdbc adapter and to transfer the data to R3.
3. Untill he keeps the file or gives indication he doesn;t want to communicate with Oracle server due to some security and it s a most important data base he doesn't want to disturb that Oracle Server as so many business are running on that.....
We Proposed::
1. Atleast you need to tell the scheduling time or poll interval time so that we can schedule our adapter.
but he s not accepting for this
2. Atleast U need to give access for Data base to enter one more extra field like STATUS CODE so that we will add one number and we keep on Update in the Update table and based on that Update table statement it will poll.
but he s not even accepting for this
3. Finally we prposed that to create another table in the Oracle SYstem as Dulplicate Table which is similar to Standard Orginal table when ever he wants to pick the data please keep that data in this Duplicate TABle so that JDBC adapter will pick the data from thsi TABLE instead of picking the data from that standard table so that it will not effect any standard table data in the table.
but he s not even accepting for this
We have done some R & D:::
1. WE approached even through BPM and via switch conditions is one scenario
   FILE RECEIVE >SWITCH CONDITION> RECEIVE AND SEND or else EXIT
2. Using correlation in anotehr scenario means correlating File adapter and JDBC and based on one dynamica value it will goes to SEND STEP ( RECE IVE --> RECEIVE --> SEND STEPS )
Even though we know this...concept that...we jsut tried::
In BPM we can control the flow in XI 3.0 but we cannot Stop the Polling of JDBC adapter at backend because one the data comes from FILE adapter it will keep on HOLD untill it receives the JDBC from Oracle then based on the condition or Correlation it will goes futher SEND step means after that file adapter is picking file or not ...what ever it may be JDBC will polls at backend and brings that data to BPM"
Hence sugest me How to Stop Polling of JDBC Adapter without Scheduling the adapter or else using STATUS CODE Update statements in JDBC Tables
Regards:
Amar Srinivas Eli

Hi! All,
Finally I decided to do the scenario in two steps:
1: FILE REQ --> JDBC REQ -->JDBC RES --> FILE RECV
2: FILE RECV --> RFC
But I am getting issue while doing first scenario
Desgn :
I have created 2 Synchronous interfaces :
1) FILE 2 JDBC REQ
In this a) out put message is FILE Req
          b) Input msage:; FILE RES
2} JDBC2FILE RECV
        a) Output mesage;; JDBC REQ
        b) Input Msge :: JDBC Response
Mappings:
1) File REQ-->JDBC REQ
2) JDBC RES-->FILE RES
Interface mappings:
1: FILE 2 JDBC REQ--> JDBC 2 FLE RECV
CONFIGURATION ::
1: One Seder File CC
2: Two reciever CC's one is for JDBC RECEIVER and other s FILE RECEIVER
3; One Sender Agreement
4: 2 Recver agreements
5: One Interface Determination and
6: One RECCV Determination
My Question;;
1. First let confirm whether my development steps are right or not ?
2: Another thing s I am not sure reg Configuration Steps means
whetehr one interface determination and one Receiver Determinations are required or not as these are synchronous Interfaces
3: main Issue is::::
If my scenario s FILE2RFC2FILE then I will get RFC response automatically but here issue is this is JDBC
My reqquirement is By sending one Field from fILE to JDBC REQ it needs to send entire TAbLE records as a Response to file as XML
without having Sender JDBC how can I send the JDBC Res to FILE and If that is the case then again JDBC adapter is polling which is contradict to the client requuirement which i explained above.
pleas suggest me the Detailed steps mainly Colloboration agreements and logical routings and
also explain in detail if i can go for BPM
Also give cleear blogs but before giving make sure that it contains detailed screen shots because aIready gone thorugh
Scenario File-JDBC-RFC
File<-->JDBC Sync coomunication.
https://www.sdn.sap.com/irj/scn/wiki?path=/display/xi/file-rfc-file(Without+BPM)
/people/luis.melgar/blog/2008/05/13/synchronous-soap-to-jdbc--end-to-end-walkthrough
Regards::
Amar Srinivas Eli

Handling Fault Messages for JDBC Receiver (Syn Inbound)

Dear Freinds,
Can we handle fault messages for JDBC Receiver which is synchronous.
OB Proxy Syn <> IB JDBC Syn
1. How to handle the same ? Please give some examples.
2. Should we use Stored Procedures at Oracle side to handle the fault messages and send back as response to the Proxy Response. Will it work.
Thanks & Regards
K.Ramesh

Dear Friend,
I have 2 interfaces where Proxy is OB & JDBC is IB. In the first interface both sender and Receiver are synchronous and in the second one it is Async.
In the first interface i have to send one field from R/3 table along with Native SQL query string to XI and the response of the SELECT query is sent back to the sender.
Assume if no fields are selected based on the field sent then proper error message has to be sent instead of the response message.
In the second interface i will be using UPDATE query at Asyn JDBC receiver.
How to do this if you are having JDBC Receiver.
I saw in many blogs where they had mentioned that we cannot handle fault messages in the Receiver JDBC.
KIindly explain.
Thanks
K.Ramesh

Rfc(Syn)- BPM- JDBC connection breaks for job in 2Hrs

Hi All,
I have a scenario Rfc(Syn)->BPM->JDBC.
Problem i am facing is after 2Hr of execution of scenario. SAP & XI connectivity breaks down.
But to process full data it requires 5-6Hr connectivity because store procedures taking time(for 500 records).
Is there any solution for above problem?
Can we use ABAp Proxy instead of Rfc(i.e. ABAP Proxy->BPM->JDBC), If possible How?
Thanks & Regards

hi,
>>>>I have a scenario Rfc(Syn)->BPM->JDBC.
sync??? you can/should only use sync
if the response time is around 30 seconds
so change the interface to async
>>>>Can we use ABAp Proxy instead of Rfc(i.e. ABAP Proxy->BPM->JDBC), If possible How?
yes but you still have to do it in an async way
Regards,
michal
<a href="/people/michal.krawczyk2/blog/2005/06/28/xipi-faq-frequently-asked-questions"><b>XI / PI FAQ - Frequently Asked Questions</b></a>

Error while executing the SOAP-XI-JDBC(syn) scenario

Dear Forum,
We have done SOAP-XI-JDBC(synch) scenario with out BPM.
When we sent the request data from EP to Oracle database through XI, we got an error,Runtime in Message-Mapping transformation~.
com.sap.aii.utilxi.misc.api.BaseRuntimeException: Runtime in Message-Mapping transformation: Cannot produce target element /ns:Customer/customers. Check xml instance is valid for source xsd and target-field mapping fulfills requirements of target xsd at com.sap.aii.mappingtool.tf3.AMappingProgram.start(AMappingProgram.java:291)
Exception message says that it is a mapping issue. But we got the responce data from database along with this message.In message monitoring we got the message processed successfully.
Now i am not able to understanding why it throughs an error Runtime in Message-Mapping transformatio~ first time ?
Pls revert me to fulfill this task successfully.
Points will be rewarded.
Regards,
Naresh

Dear Friends,
Sorry for the delay,and Thank you for your quick responce.
Yes I got that message under trace option in SXMB_MONI,
Pls find the following msg structures and if any error please let me know status...
Soap request structure:
<?xml version="1.0" encoding="ISO-8859-1"?>
<xsd:schema xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns="http://soap2dbns" targetNamespace="http://soap2dbns">
<xsd:element name="soap_reqmt" type="soap_reqdt" />
<xsd:complexType name="soap_reqdt">
<xsd:annotation>
<xsd:appinfo source="http://sap.com/xi/TextID">
5b474a34c8a511dc8d8e001a4bf038d4
</xsd:appinfo>
</xsd:annotation>
<xsd:sequence>
<xsd:element name="Request" maxOccurs="unbounded">
<xsd:annotation>
<xsd:appinfo source="http://sap.com/xi/TextID">
49b1ae20c81211dcce03001b78afb958
</xsd:appinfo>
</xsd:annotation>
<xsd:complexType>
<xsd:sequence>
<xsd:element name="ORDERID" type="xsd:string">
<xsd:annotation>
<xsd:appinfo source="http://sap.com/xi/TextID">
49b1ae21c81211dcc20d001b78afb958
</xsd:appinfo>
</xsd:annotation>
</xsd:element>
<xsd:element name="Operation" type="xsd:string">
<xsd:annotation>
<xsd:appinfo source="http://sap.com/xi/TextID">
49b1ae22c81211dc858a001b78afb958
</xsd:appinfo>
</xsd:annotation>
</xsd:element>
</xsd:sequence>
</xsd:complexType>
</xsd:element>
</xsd:sequence>
</xsd:complexType>
</xsd:schema>
Data base request structure:
<?xml version="1.0" encoding="ISO-8859-1"?>
<xsd:schema xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns="http://soap2dbns" targetNamespace="http://soap2dbns">
<xsd:element name="db_reqmt" type="db_reqdt" />
<xsd:complexType name="db_reqdt">
<xsd:annotation>
<xsd:appinfo source="http://sap.com/xi/TextID">
5b4e7620c8a511dcc4fe001a4bf038d4
</xsd:appinfo>
</xsd:annotation>
<xsd:sequence>
<xsd:element name="STATEMENTNAME" maxOccurs="unbounded">
<xsd:annotation>
<xsd:appinfo source="http://sap.com/xi/TextID">
fa204eb0bceb11dcbb54001b78b0798a
</xsd:appinfo>
</xsd:annotation>
<xsd:complexType>
<xsd:sequence>
<xsd:element name="FETCHDATA">
<xsd:annotation>
<xsd:appinfo source="http://sap.com/xi/TextID">
fa204eb1bceb11dc9750001b78b0798a
</xsd:appinfo>
</xsd:annotation>
<xsd:complexType>
<xsd:sequence>
<xsd:element name="TABLE" type="xsd:string">
<xsd:annotation>
<xsd:appinfo source="http://sap.com/xi/TextID">
fa204eb3bceb11dccc94001b78b0798a
</xsd:appinfo>
</xsd:annotation>
</xsd:element>
<xsd:element name="access">
<xsd:annotation>
<xsd:appinfo source="http://sap.com/xi/TextID">
fa204eb4bceb11dc9b35001b78b0798a
</xsd:appinfo>
</xsd:annotation>
<xsd:complexType>
<xsd:sequence>
<xsd:element name="ORDERID" type="xsd:string">
<xsd:annotation>
<xsd:appinfo source="http://sap.com/xi/TextID">
fa204eb5bceb11dca20a001b78b0798a
</xsd:appinfo>
</xsd:annotation>
</xsd:element>
<xsd:element name="ITEM" type="xsd:string">
<xsd:annotation>
<xsd:appinfo source="http://sap.com/xi/TextID">
d0279840c81011dc8e4e001b78afb958
</xsd:appinfo>
</xsd:annotation>
</xsd:element>
<xsd:element name="QUANTITY" type="xsd:string">
<xsd:annotation>
<xsd:appinfo source="http://sap.com/xi/TextID">
d0279841c81011dcb8f4001b78afb958
</xsd:appinfo>
</xsd:annotation>
</xsd:element>
<xsd:element name="PRICE" type="xsd:string">
<xsd:annotation>
<xsd:appinfo source="http://sap.com/xi/TextID">
d0279842c81011dc832f001b78afb958
</xsd:appinfo>
</xsd:annotation>
</xsd:element>
</xsd:sequence>
</xsd:complexType>
</xsd:element>
<xsd:element name="key">
<xsd:annotation>
<xsd:appinfo source="http://sap.com/xi/TextID">
89f43170c81611dcc8fa001b78afb958
</xsd:appinfo>
</xsd:annotation>
<xsd:complexType>
<xsd:sequence>
<xsd:element name="ORDERID">
<xsd:annotation>
<xsd:appinfo source="http://sap.com/xi/TextID">
89f43171c81611dcb6e3001b78afb958
</xsd:appinfo>
</xsd:annotation>
<xsd:complexType>
<xsd:simpleContent>
<xsd:extension base="xsd:string">
<xsd:attribute name="compareOperation" type="xsd:string">
<xsd:annotation>
<xsd:appinfo source="http://sap.com/xi/TextID">
89f43172c81611dccba5001b78afb958
</xsd:appinfo>
</xsd:annotation>
</xsd:attribute>
</xsd:extension>
</xsd:simpleContent>
</xsd:complexType>
</xsd:element>
</xsd:sequence>
</xsd:complexType>
</xsd:element>
</xsd:sequence>
<xsd:attribute name="action" type="xsd:string">
<xsd:annotation>
<xsd:appinfo source="http://sap.com/xi/TextID">
fa204eb2bceb11dca298001b78b0798a
</xsd:appinfo>
</xsd:annotation>
</xsd:attribute>
</xsd:complexType>
</xsd:element>
</xsd:sequence>
</xsd:complexType>
</xsd:element>
</xsd:sequence>
</xsd:complexType>
</xsd:schema>
Soap Responce Structure:
<?xml version="1.0" encoding="ISO-8859-1"?>
<xsd:schema xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns="http://soap2dbns" targetNamespace="http://soap2dbns">
<xsd:element name="soap_resmt" type="soap_resdt" />
<xsd:complexType name="soap_resdt">
<xsd:annotation>
<xsd:appinfo source="http://sap.com/xi/TextID">
8d49d494c8a411dc81f5001a4bf038d4
</xsd:appinfo>
</xsd:annotation>
<xsd:sequence>
<xsd:element name="response" minOccurs="0" maxOccurs="unbounded">
<xsd:annotation>
<xsd:appinfo source="http://sap.com/xi/TextID">
491ccd30bd0611dcb29d001b78b0798a
</xsd:appinfo>
</xsd:annotation>
<xsd:complexType>
<xsd:sequence>
<xsd:element name="row" minOccurs="0" maxOccurs="unbounded">
<xsd:annotation>
<xsd:appinfo source="http://sap.com/xi/TextID">
491ccd31bd0611dca3d7001b78b0798a
</xsd:appinfo>
</xsd:annotation>
<xsd:complexType>
<xsd:sequence>
<xsd:element name="ORDERID" type="xsd:string">
<xsd:annotation>
<xsd:appinfo source="http://sap.com/xi/TextID">
491ccd32bd0611dcc7d1001b78b0798a
</xsd:appinfo>
</xsd:annotation>
</xsd:element>
<xsd:element name="ITEM" type="xsd:string">
<xsd:annotation>
<xsd:appinfo source="http://sap.com/xi/TextID">
491ccd33bd0611dca6ad001b78b0798a
</xsd:appinfo>
</xsd:annotation>
</xsd:element>
<xsd:element name="QUANTITY" type="xsd:string">
<xsd:annotation>
<xsd:appinfo source="http://sap.com/xi/TextID">
491ccd34bd0611dc95a8001b78b0798a
</xsd:appinfo>
</xsd:annotation>
</xsd:element>
<xsd:element name="PRICE" type="xsd:string">
<xsd:annotation>
<xsd:appinfo source="http://sap.com/xi/TextID">
491ccd35bd0611dcc034001b78b0798a
</xsd:appinfo>
</xsd:annotation>
</xsd:element>
</xsd:sequence>
</xsd:complexType>
</xsd:element>
</xsd:sequence>
</xsd:complexType>
</xsd:element>
</xsd:sequence>
</xsd:complexType>
</xsd:schema>
Database responce Structure:
<?xml version="1.0" encoding="ISO-8859-1"?>
<xsd:schema xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns="http://soap2dbns" targetNamespace="http://soap2dbns">
<xsd:element name="db_resmt" type="db_resdt" />
<xsd:complexType name="db_resdt">
<xsd:annotation>
<xsd:appinfo source="http://sap.com/xi/TextID">
8d3b7cb1c8a411dcb1d6001a4bf038d4
</xsd:appinfo>
</xsd:annotation>
<xsd:sequence>
<xsd:element name="STATEMENTNAME_response" maxOccurs="unbounded">
<xsd:annotation>
<xsd:appinfo source="http://sap.com/xi/TextID">
adca3410bcfd11dcaf4c001b78b0798a
</xsd:appinfo>
</xsd:annotation>
<xsd:complexType>
<xsd:sequence>
<xsd:element name="row" minOccurs="0" maxOccurs="unbounded">
<xsd:annotation>
<xsd:appinfo source="http://sap.com/xi/TextID">
adca3411bcfd11dc92d6001b78b0798a
</xsd:appinfo>
</xsd:annotation>
<xsd:complexType>
<xsd:sequence>
<xsd:element name="ORDERID" type="xsd:string">
<xsd:annotation>
<xsd:appinfo source="http://sap.com/xi/TextID">
adca3412bcfd11dc92e8001b78b0798a
</xsd:appinfo>
</xsd:annotation>
</xsd:element>
<xsd:element name="ITEM" type="xsd:string">
<xsd:annotation>
<xsd:appinfo source="http://sap.com/xi/TextID">
adca3413bcfd11dc9f7a001b78b0798a
</xsd:appinfo>
</xsd:annotation>
</xsd:element>
<xsd:element name="QUANTITY" type="xsd:string">
<xsd:annotation>
<xsd:appinfo source="http://sap.com/xi/TextID">
adca3414bcfd11dcc6c4001b78b0798a
</xsd:appinfo>
</xsd:annotation>
</xsd:element>
<xsd:element name="PRICE" type="xsd:string">
<xsd:annotation>
<xsd:appinfo source="http://sap.com/xi/TextID">
adca3415bcfd11dca54c001b78b0798a
</xsd:appinfo>
</xsd:annotation>
</xsd:element>
</xsd:sequence>
</xsd:complexType>
</xsd:element>
</xsd:sequence>
</xsd:complexType>
</xsd:element>
</xsd:sequence>
</xsd:complexType>
</xsd:schema>
Regards,
Naresh

Reg http to jdbc Scenario

Hi all,
I am trying to execute a synchronous Http to Jdbc Scenario using MS Access table as my back end.
In design part ,I have followed the steps like
1. Created a http req ,jdbc req, jdbc response ,and then http response in Data types and the in Message types.
2.Created Outbound MI with http req and http response as input and output messages respectively,then Inbound message interface with jdbc req and jdbc response as input and output messages respectively.
3.In Message mapping with Http req and jdbc req as request mappings and jdbc response and http response as Response mappings following the Action and access Steps.
Thats Fine with design part
IN Configuration Part, Since it is a Http Sender ,i didnt create any sender agreement and sender communicatin channel.
Then Configured Jdbc adapter properly and i am able to access my table with that.
While Executing ,I can find that my message is sent in Runtime workbench and can find that Jdbc adapter is Running by showing green flag.
I was trying to send an empid of a table as key and expecting to retrieve the complete row of the corresponding key.
But I could not find the response even though everything is fine with XI.
Where Could be the problem ,where can I see the response from jdbc adapter .
Please help me out in solving this .
Thanks and Regards,
Kalpana

Hi Kalpana,
Can you check this weblog
/people/bhavesh.kantilal/blog/2006/07/03/jdbc-receiver-adapter--synchronous-select-150-step-by-step
This should help you...
Check the Response Mapping,also you have one IM with Reqest and Response mapping...
Also if you have SP16 then you can have sender CC for HTTP also ...
Regards,
sridhar

Reg error in interface mapping in RFC to JDBC scenario

Hi Techies,
Iam trying to map the scenario RFC to JDBC.
In configuration window Iam testing the configuration.
when Iam testing it is giving the error.
" com.sap.aii.utilxi.misc.api.BaseRuntimeException thrown during application mapping com/sap/xi/tf/_mm_mapping_: Parsing an empty source. Root element expected! "
My mapping is as follows
                   mt_receiver
                                                        statement
                                                            ROW
                                                 action---insert
             ZHRT002----
     Table
     Item----
access
          MANDT
          PERNR                                     PERNR
          PERID                            PERID
          SHOPN                           SHOPN
Sender
<?xml version="1.0" encoding="UTF-8"?>
<ns0:ZTEST_PI_ZHRT002 xmlns:ns0="urn:sap-com:document:sap:rfc:functions">
   <ZHRT002>
      <item>
         <MANDT/>
         <PERNR/>
         <PERID/>
</item>
   </ZHRT002>
</ns0:ZTEST_PI_ZHRT002>
Reciver
<?xml version="1.0" encoding="UTF-8"?>
<ns1:mt_receiver xmlns:ns1="urn:sap-com:RFC2JDBC"><Statement1><ROW action="INSERT"><TABLE>ZHRT002</TABLE><access><PERNR></PERNR><PERID></PERID></access></ROW></Statement1></ns1:mt_receiver>
Please give suggestion how to go about this.
Thanks in advance,
Regards,
Kiran

Hi,
Please check the payload you are using to test the configuration.
The structure seems to be Incorrect.
Regards,
Deepak

Reg: JDBC to IDOC Scenario Message Mapping

hi Friends
i am designing a Scenario JDBC - IDOC for accounting document interface using ACC_DOCUMENT03 idoc.
i need the mapping program for that to map the JDBC fields with the IDOC fields, so can anyone help me the mandatory fields and the constant values for the IDOC which has to be mapped.Along with this can i know why the constants will be assigned to the fields like Begin =1 , MSGFN = 009 etc how these constants are defined.
Thanks&Regards
suman.

Hi,
for mapping constants in graphical msg mapping, select your target IDOC field..........then you have a constant in the below screen.........click it and then double-click on constant to change the value of the constant field.........then map this constant to your target IDOC field.
for knowing which are the mandatory fields, ask your functional guys to tell you the mandatory fields in data segment of your IDOC and regarding Control segment EDIDC, you have to map fields which have sender and reciever system details.
Regards,
Rajeev Gupta
Edited by: RAJEEV GUPTA on Feb 2, 2009 7:55 AM

Reg: JDBC Sender Adapter Locking everytime

HI Experts,
I am facing one issue regarding Sender JDBC Adapter.
I already gone through few SDN LInk and followe the SAP Note 1083488 and few other links and blogs but there is no Use.
I already kept JDBC SENDER>Advance>TASKTIMEOUT = 0 because as per the above note if I am keeping more than 0 then due to some server issues It is difficult to identify the adapter behaviour so I kept 0
Can you please let me know any other Alternate way to identify this solution.
Regards:
Amar Srinivas Eli

When you start communication channel what is the error are you getting??
post your error message so that we can help you,
Regards,
Raj

Reg : SYN JDBC

Similar Messages

Maybe you are looking for