Reg: Tables for Catalog Area

Hi Friends,
Can anyone get me the Tables for Catalog, bcz when i am adding a product in a catalog, i want to know which table it is getting update for catalog, so that i can get a link b/w catalog area and product for my requirement.
Venki

hi Venkatesh Muthan,
based on experience building customized web product catalog, there is several tables is used in product catalogs
here the list of them :
CRMM_ISA_SHOP_H -> list of web shop for internet sales
CRMM_ISA_SHOP_HT -> list of web shop description for internet sales
COMM_PCAT_HDR -> product catalog
COMM_PCAT_HDR_T -> product catalog description
COMM_PCAT_CTY -> Product Catalog Area
COMM_PCAT_CTY_T -> Product Catalog Area Description
COMM_PCAT_CTV -> Product Catalog Area - Version
COMM_PCAT_VRT -> Product Catalog Variant
COMM_PCAT_VRT_T -> Description of Product Catalog Variant
COMM_PCAT_VRT_IP -> Price Determination of Product Catalog Variants
COMM_PCAT_VRT_PU -> Product Catalog Variant-Publication Status
COMM_PCAT_VIEW -> Product Catalog View
COMM_PCAT_VIEW_T -> Product Catalog View Description
COMM_PCAT_VITM -> Product Catalog View-Item
COMM_PCAT_ITM -> Product Catalog Item
COMM_PCAT_ITV -> Product Catalog Item- Version
COMM_PRODUCT -> Product
COMM_PRSHTEXT -> Product Description
COMM_PCAT_VPRP -> Product Catalog View-Partner Product Selection
CRMM_PRP_BUPA_I -> Partner/Product Range Item-Partner Assignment
please award points if helps
regards
eddhie

Similar Messages

  • Tables for Catalog details...

    Hi,
    I'm new to CCM. Can any one let me know the details of the tables or reports where I can find the following details:
    1. Catalogue Number
    2. Date on which catalogue was created
    3. Who had created the catalog.
    4 Whether any changes were done for the catalogue
    5. When the changes were done & who had done the changes.
    It will be really helpful if any one can send me the material on CCM.
    Wishes & Regards,
    Mahesh. J

    Hi,
    All the CCM tables are stored under Table names </CCM/>
    You can also check these reports in SE38... There are more of them, do a search on /CCM/*
    Report Name Description. Attention / additional hints
    /CCM/CLEANUP_CATALOG Deletion / Cleanup of catalogs. May be dangerous since all catalogs can be deleted via this report! The report is needed if an upload crashed in order to delete the temp. version of the uploaded catalog.
    /CCM/PATCH_CATALOG Needed if data migration was necessary between two support packages in order to migrate the data.
    /CCM/VERIFY_CATALOG Prints out a list of the database content of a catalog.
    Options on the selection screen for Item valuations, includes deleted objects, views etc.
    /CCM/CATALOG_CME_DATA Shows the predefined characteristics / data types
    Shows the characteristics / data types of a catalog.
    Can be used to check the data (e.g. alias, aspects) of predefined characteristics
    /CCM/VISUALIZE_MAPPING Displays the mapping tables for a given catalog ID
    /CCM/INITIALIZE_CME Initializes the predefined data types / characteristics. Used to initialize the catalog
    BR,
    Disha.
    <b>Pls reward points for useful answers.</b>

  • Reg:Table for Custom Messages and custom Messaege Classes

    Hi ,
    My requirement is to find out all custom messages . so can any one tell in which tables all custom messages and custom message classes are stored .
    Thanks & Regards,
    Lakshmi.

    hi,
    You can checkthese tables listed below,
      T100                             Messages
      T100A                            Message IDs for T100
      T100C                            Message Control by User
      T100O                            Assignment of message to object
      T100S                            Configurable system messages
      T100SA                           Application Areas for Configurable Messages
      T100T                            Table T100A text
      T100U                            Last person to change messages
      T100V                            Assignment of messages to tables/views
      T100W                            Assign Messages to Workflow
      T100X                            Error Messages: Supplements
      T100ARBGB                    Application Area
    But The main table for storing all the message classes and their numbers are stored in table
    T100

  • What is the table for catalogs and codes complete list???

    Dear Experts,
    How to retrieve the total list of catalogs and codes by using table??
    can any one give me the table name to retrieve the complete list of catalogs and codes ??
    Please do the needful.
    Thanks ,
    Sunil Boya

    Sunil,
    See this document. Catalog Profile and Catalogs & Codes
    If you see this join picture you'd understand that the answer to your question is tables: T352C, QPGR, QPCD.
    If you are looking for individual tables then
    VIQMFE - for Object part and Damage
    VIQMUR - for Causes
    VIQMSM - for Tasks
    VIQMMA - for Activites
    QPGT - for Code Group texts
    QPCT - for Code texts
    If you want to know more you may ask.
    Best of Luck
    Jogeswara Rao K

  • Joining two fact tables for subject area

    When I tried to use two simple fact tables joined by a dimension, I am getting the “ No fact table exists at the requested level of detail” error in the answer when I try to pull the columns from Fact 1 and Fact 2 tables. I have set the content in both the fact table to lowest granularity of dimension with CUST_ID, RAT_ID, ACT_ID keys. We have one to many relationships between dimension and both the fact tables. Any feedback is highly cherished.
    Fact1: keys are: CUST_ID, RAT_ID, ACT_ID, YEAR
    Fields are CUST_ID, RAT_ID, ACT_ID, YEAR , Rev1, Transaction Date
    Fact2: keys are: CUST_ID, RAT_ID, ACT_ID, YEAR
    Fields are CUST_ID, RAT_ID, ACT_ID, YEAR , Rev2, CreationDate
    Dimension keys are CUST_ID, RAT_ID, ACT_ID
    Thanks,
    uday

    Hi LC,
    We have to add two fact tables F1 AND F2 to an existing bmm. These fact tables have history tables F11 AND F22 and we have to use partition logic for this.How you did partition ? you should be using Fragmentation logic for that any how you will add the F11/F22 tables to F1 and F2 LTS , so when you join F1 & F2 to the common dimension then it should work for the calucluated measures but dont forgot to create hierarchies and specify the content levels for the fact tables
    Thanks,
    Saichand

  • Table for Planning area and planning books

    Hi,
            Is there a table that gives the list of planning books associated with a planning area? I want to enter a planning area  and get the planning books associated with it or enter planning book and be able to get the planning area it is in.
    Thanks.

    Hi Raj,
    You can try with transaction ST14,there you find the detail about your planning area and book and macro and so on ..for all the application DP and SNP and CIF.
    Regards,
    Prabhu

  • Reg: Tables for Batchman jobs

    Hi Experts ,
    Is there any table which gives the information about scheduling of batchman jobs i.e. table should give the list of the batchman jobs that are scheduled daily, weekly, monthly.
    I found some tables but these tables(J_5H1_RUNTIME, J_5H1_BWAAPL) but these tables gives the information about the batchman jobs that are already started, but i need the table that gives the information about the batchman jobs that yet to be start but already scheduled.
    Please help me, points will be given.
    Thanks in advance
    naga
    Edited by: Nagaraj Gumatimath on Aug 9, 2011 12:28 PM

    Hi srinivas, Subash,
    Thnks for your info.  as I mentioned the question after finding the status of the BATCHMAN JOBS I need to mail that status to an external mail, so for this I need to fetch status data from  STANDARD TABLE into internal table and pass this internal table to function module to send a mail.  But I am not able to find the STANDARD TABLE that gives the status of the BATCHMAN JOBS, I have gone through tables TBTCO, TBTCS but these tables does not contain information about Batchman jobs( Eg: B1_STAGING_SAP_PC_COS,  B1_OTIF_EMEA_LOAD), so please help me in finding the appropriate Standard Table.

  • Configuration table for personnel area and sub areas

    Hi folks,
    Is there a configuration table to get the text related to personnel area (WERKS) and personnel subarea(BTRTL)?
    Thanks,
    Sk

    Thanks,
    However had a question. when I typed BTRTL in the data element category and checked to find this table did not show up for me in the list. why did this happen?
    Just want to know it happened for WERKS too.
    Your answer would be really helpful.
    Thanks,
    SK

  • Reg:Tables for Workflow

    Hi All,
    My requirement is as follows...
    I need to create one new program based on contract number when I executed that program it should show the status of approval where itu2019s pending whether rejected or approved and comment of approved / rejected . If he regenerated same contract   we have to pick current status with comments and old status with comments.
    Workflow is full developed from Scratch.I can say it is zworkflow.
    This is very urgent plz help me.

    OK, with function SAP_WAPI_WORKITEMS_TO_OBJECT and BUS2032 you can get the work items that are connected to the contract. That is the first step. Now you have the work items.
    Now you can read the container values of the work items with SAP_WAPI_READ_CONTAINER.
    The status of the contract you will hopefully get from the contract table (if the contracts have this kind of information). If not, then you probably need to read it from the container.
    Just take a look into a technical workflow log of one contract workflow instance and check the container values there. Then play around with SAP_WAPI_READ_CONTAINER in SE37 and see what it returns. You should get pretty good idea how the function work. Also check other SAP_WAPI* functions - there are plenty of useful stuff.
    It is impossible to give detailed instructions since we don't see your custom workflow and you don't provide too much information.
    Regards,
    Karri

  • Reg; Table for link between plan and sales organization for a material

    Hi,
    I created a material for two plants and maintained one sales org, now i wnt to know the table to find the link betwen plants and sales organization wtih respective materials.
    Pls Help me......
    Thanks,
    Anto.

    hi,
    check tables MVKE, MARC and MARC...
    You can view them in SE16/SE11 tcode...
    Regards
    Priyanka.P

  • B2B. Limitation for product catalog area

    Hi,
    Does product catalog has limitations?
    Can i use any number levels for catalog area ?
    Denis

    I haven't seen an explicit limit. But I am guessing that it goes something like this:
    The total sum of all the categories and sub-categories in all levels is not greater than 10,000.
    Say if we have only two main categories, then we can go 5000 level deep in each main category (no more than one sub category at each level). Or if we have 5000 main categories, then we can go just one more level deeper at each category). In both the cases, the total categories + sub-categories is 10,000.
    So, in theory we can have as many combination as you can imagine with in these limits.
    More often, the limiting factor is the usability rather than the number of sub-categories.

  • Table for Leave request

    Hi,
    When Leave is ceated in ESS, after approval it shows in IT2001 but while in process i.e. before approval in which table leave gets saved.
    How to find out the leave in process? In which table Data gets captured? or what is Tranaction code?
    Please guide.
    Thanks,
    Abhay

    Hi ,
    You can find everything in transaction PTARQ.
    The main tables for PTARQ are :
    PTREQ_HEADER :Request Header
    PTREQ_items : Request Items
    PTREQ_attabsdata : Request Data for Attendances/Absences
    Check following query.
    You will find the exact relation ship between these three tables :
    select SINGLE item_list_id into w_item_list_id
            from ptreq_header
            where request_id = request_id
            AND VERSION_NO = ( SELECT MAX( VERSION_NO ) FROM ptreq_h
            where request_id = request_ID and status = 'SENT').
    select single ITEM_INS
            from ptreq_items
            into w_item_ins
            where ITEM_LIST_ID = w_item_list_id.
    select single *
            from ptreq_attabsdata
            into wa_ptreq_attabsdata
            where ITEM_ID = w_item_ins.
           STARTDATE = wa_ptreq_attabsdata-begda.
           ENDDATE = wa_ptreq_attabsdata-endda.
           CUSTOMERFIELD1 = wa_ptreq_attabsdata-CUSTOMER01.
           CUSTOMERFIELD2 = wa_ptreq_attabsdata-CUSTOMER02.
    Regards,
    Kalpesh

  • Table for Plan Data

    Hi Experts
    Created Cost Element Groups and Cost Center Groups and have Uploaded Plan data in KP06.
    Kindly provide me the Table Names for Cost Element groups,Cost Center groups and Plan Fixed Costs.
    Thanks & Regards
    KumarRaja
    Edited by: Kumar Raja D on Oct 7, 2009 2:36 PM

    Hi,
    Tables for groups are SETNODE and SETLEAF. Select by object class the required group (cost centres, cost elements, etc.) The tables for planning are COKP (primary) and COKS (secondary).
    Regards,
    Eli

  • Table for Table descriptions

    Hi All,
    Does anyone have any idea - is there any table that stores the descriptions of the tables?
    Example: MARA: General Material Data
                   VBAK: Sales Document: Header Data
    Can anyone tell me where can i get these descriptions?
    Actually my requirement is i need to get the descriptions for the transaction VK15 key combination?
    Like    SalesOrg/Material
              Customer/Material etc.. The corresponding tables for these are A902 ... etc.. and these are descriptions for these tables.
    Can you please suggest?
    Thanks.
    Regards.

    Hi SM,
      For table text :
    Table :DD02T : R/3 DD: SAP table texts
    Text field: DDTEXT  :Short Text Describing R/3 Repository Objects
      For Table:
    DD02L : SAP Tables
    With luck,
    Pritam.

  • Table for Cube request

    Hi Experts,
    I would like to know the table in which data load request for cube is stored with records added and transferred and other cube related details. Please help.

    Hi,
    for the request part you can look at the table RSBKREQUEST by filling in the source or target object.
    Different tables for cube are :
    RSDCUBE    Directory of InfoCubes
    RSDCUBET   Texts on InfoCubes 
    RSDCUBEIOBJ    Objects per InfoCube (where-used list) 
    RSDDIME    Directory of Dimensions 
    RSDDIMET   Texts on Dimensions 
    RSDDIMEIOBJ    InfoObjects for each Dimension (Where-Used List) 
    RSDCUBEMULTI    InfoCubes involved in a MultiCube 
    RSDICMULTIIOBJ     MultiProvider: Selection/Identification of InfoObjects 
    RSDICHAPRO     Characteristic Properties Specific to an InfoCube 
    RSDIKYFPRO    Flag Properties Specific to an InfoCube 
    RSDICVALIOBJ    InfoObjects of the Stock Validity Table for the InfoCube 
    thanks,
    arminder

Maybe you are looking for