Reg: Tables to findout status of Batchman jobs

Hi Experts ,
Is there any table which gives the information about scheduling of batchman jobs i.e. table should give the list of the batchman jobs that are scheduled daily, weekly, monthly.
I found some tables but these tables(J_5H1_RUNTIME, J_5H1_BWAAPL) but these tables gives the information about the batchman jobs that are already started, but i need the table that gives the information about the batchman jobs that yet to be start but already scheduled.
Please help me <removed by moderator>
Thanks in advance
naga
Edited by: Vinod Kumar on Aug 17, 2011 11:57 AM

Hello Nagaraj,
If you go to T code- J5hen and on the main screen if you select the reporting Option.
You can find the Run time statistics/Histogram which gives you the details of the Batchman Jobs Start and End Timings for the selected date range.
You can find out in the system as which table it is linked to (as I have not done the home work and will let you know shortly) and you can get the details of the table which you are searching.
Thanks and Regards
Sushma C N

Similar Messages

Reg: Tables for Batchman jobs

Hi Experts ,
Is there any table which gives the information about scheduling of batchman jobs i.e. table should give the list of the batchman jobs that are scheduled daily, weekly, monthly.
I found some tables but these tables(J_5H1_RUNTIME, J_5H1_BWAAPL) but these tables gives the information about the batchman jobs that are already started, but i need the table that gives the information about the batchman jobs that yet to be start but already scheduled.
Please help me, points will be given.
Thanks in advance
naga
Edited by: Nagaraj Gumatimath on Aug 9, 2011 12:28 PM

Hi srinivas, Subash,
Thnks for your info. as I mentioned the question after finding the status of the BATCHMAN JOBS I need to mail that status to an external mail, so for this I need to fetch status data from STANDARD TABLE into internal table and pass this internal table to function module to send a mail. But I am not able to find the STANDARD TABLE that gives the status of the BATCHMAN JOBS, I have gone through tables TBTCO, TBTCS but these tables does not contain information about Batchman jobs( Eg: B1_STAGING_SAP_PC_COS, B1_OTIF_EMEA_LOAD), so please help me in finding the appropriate Standard Table.

How to check the status of a job!!!

Hi,
i want to check the status of a job and also send a mail when a job is cancelled.
Is there any function module which does that , also i want check the jobs across various time periods and not of today....
Its urgent,
Answers will be rewarded,
Regards,
Rohan

Hi Rohan,
You can get job information by calling function "BP_JOB_READ". If you pass the value btc_read_jobhead_only defined in LBTCHDEF, it will only return the
job header info into the export parameter JOB_READ_JOBHEAD. The job status
is set in JOB_READ_JOBHEAD-STATUS.
Alternatively, you can just lookup table TBTCO, the status is in
TBTCO-STATUS.
The values in STATUS are defined in LBTCHDEF as follows;
DATA:
BTC_RUNNING LIKE TBTCO-STATUS VALUE 'R',
BTC_READY LIKE TBTCO-STATUS VALUE 'Y',
BTC_SCHEDULED LIKE TBTCO-STATUS VALUE 'P',
BTC_RELEASED LIKE TBTCO-STATUS VALUE 'S',
BTC_ABORTED LIKE TBTCO-STATUS VALUE 'A',
BTC_FINISHED LIKE TBTCO-STATUS VALUE 'F',
BTC_PUT_ACTIVE LIKE TBTCO-STATUS VALUE 'Z',
BTC_UNKNOWN_STATE LIKE TBTCO-STATUS VALUE 'X'.
Thanks,
Vinay

Check Status of a job step

Hi,
Can anyone tell me how to check the true status of a job step.
Using tables TBTCP , or FM BP_JOB_READ what i can come to know is the status of a job step to be 'P" ie Scheduled even when the job containing that step has finished succesfully(Status from TBTCO ).
My Job has 3 steps.
I want to know the status of my 1st job step and based on the status (either Aborted or Finished) i want it to proceed further n execute the 2nd step.and so on.
IS any there way out??
Answers will be rewarded,
regards,
Rohan

Hi,
Checking your job status with SM50 (processor type BTC) is more accurate then SM37. SAP updates the tables TBTCO wheneveryour background jobs status change. If SAP is shutdown, the currentjobs might not be update ontime to the table. (e.g. a background job wasshown as Active (SM37), in fact it real status should be Cancelled.
Look at the function module GET_JOB_RUNTIME_INFO
Regards
Sudheer

Field and Table for PGI status updation

Hi All,
I want to know in which field and table the PGI status will get updated.
i.e. once we do the PGI for a delivery in which table will this PGI status gets updated.
Thanks in advance for help.
Harini

Hi Harini,
In Table VBUK you 3 different status related fields for sales documents.
Over all status field name GBSTK ( here it gives the total status of praticular sales document) here you see options
A Not yet processed      ( This means its complete open)
B Partially processed     ( This means the sales doc is partially processed)
C Completely processed ( This means the sales doc is completly processed)
Delivery status and over all delivery status field name LFSTK and LFGSK respectively, these 2 fields will be same always ( here it gives the total status of praticular sales document) here you see options
A Not yet processed      ( This means its completly open)
B Partially processed     ( This means the delivery doc is partially processed)
C Completely processed ( This means the delivery doc is completly processed)
So overall status can be different then delivery or overall delivery status.
If sales document has 100 quantity for 1 material, if delivery is done for 50 quantity.
Then over all status field name GBSTK will be B Partially processed and delivery and overall delivery will be C Completely processed .
Regards
vK

Checking status of scheduled jobs in Hyperion System 9.3.1 ....

Hi All,
We have Hyperion System 9 9.3.3. We have a Daily job scheduled every morning to check the status of the scheduled jobs that run daily. One of the jobs has a status message as below.
Failure - Internal error.ContainerCache.populate: The object "0000011386a6823b-0000-a99f-0a103a4a" is not found. It either does not exists, or it may be inaccessible.
But when I check the job status in View Job Status > Job Scheduler module, I see the report is still running. It's just that this report is taking longer to run and completes some time after the Daily Job Status check report runs.
In this case, shouldn't the status should say something like the job is still running instead of "Failure" which is misleading?
Thanks in advance.
Z

Hi,
I have the same problem with Oracle EPM 11.1.2:
com.sqribe.transformer.ObjectNotFoundException: ContainerCache.populate: The object "0000012f0710ca12-0000-a4ad-c0a80003" is not found. It either does not exists, or it may be inaccessible.
Who gives me the right answer?
Thanks in advance, Ron

Which table are notification status in?

hi,dear experts,
Do you know which table are notification status in? and which fields are they? I can't find them in table QMEL.
And, which table are the system status of notification in? which fields are they?
I are doing a report and need these information. I used ST05 to trace IW29,but i failed.
Thank you very much.

JEST

Tables for Opportunity "Status" and "Reason"

Hi,
Can someone help me in finding the tables for determining "Status" and "Reason" for an opportunity along with the relvant text descriptions?
Regards,
Sandeep

Hi Sandeep,
Status- code in field stat of CRM_JEST table
                OBJNR = guid opportunity
                INACT = SPACE
        Text of status in TJ30T with your status profile
Reason- code in field code of CRMD_SRV_SUBJECT with
           guid_ref equal to guid_set( of crmd_link with objtype_set = 29 )
        Text of reason in QPCT
I hope this way help you.
Regards.
Manuel

Table for aggregate status

Hi Experts,
Which table has aggregate status and data?
Early answer is appreciated..
Thanks in Advance,
Vijaya

Hi
Tables in BW,
Aggregate -RSDDAGGRDIR.
Routines - RSAABAP
Update rules - RSUPD*
Transfer Structures - RSTSRULES*
Also take look,
RSDDAGGL
RSDDAGGLF
RSDDAGGRDIR
RSDDAGGRDIR_M
Hope it may be helpful to you
Many thanks
Kiran

IDOC Error - Entry in outbound table not found - Status 37

Hello,
we try to generate the IDOC in a Test Tool WE19. I always get the same error "Entry in outbound table not found" - Status 37. I tried already many config changes (Partner, Ports, Distribution Modell...).
The thing is that the IDOC should be sent on external system (non-SAP System) but also the IDOC should be write to file. The external system should later on catch the IDOC and process the data.
I suppose the problem is the fact that we send it to external non-SAP System. I add as Port Data and the source where the IDOC shoud be generated. The Partner that I choose is logical system. However I dont specify the RFC Connection because the file should only be saved and not send directly on the external system. Is it possible or maybe I need to specify the IP-Adress of the external system?
When it works I need to generate the IDOC as service management IW32. I try it with TA IORD. I get the message "rejected". Probably because of the error in the test tool WE19.
I am already fighting on it for many hours...
Thank you in advance
Michael

Hi
In we 19
Receiver
Port: A port created in R/3 referencing RFC dest pointing to XI.
Partner no: LS of XI (CLNT100)
Partner Type: LS
Sender
Partner no: LS of R/3 (RD1CLNT500)
Partner Type: LS
Message Type is DESADV
Basic DELVRY05
and i am sending blank idoc for testing.
Regards
Monika

If BW system is down for several hours, what will be the status of the Jobs

Hello Gurus,
   I don't know where i should post this issues! anyways .....! i need some information. One of our BW production system will be down for about 12 hours tomarrow to move it on to new hardware and this current system has lots of scheduled jobs with run daily and hourly..! so my question is ..what will be the status of this jobs which fall in between this down time?
     as per our basis team information....they said that all these jobs will be queued up and when once the system is online ...these jobs will access all the avalable processess and if this thing happen....! then the system will have a VERY BAD performance and user cannot use this BW system...they cannot even open the bex analyzer.
      so...i thought of deleting these queued jobs. can any one tell me WILL THESE JOBS WILL BE SCHEDULED FOR NEXT DAY??? OR IS THERE ANY OTHER WHY TO CONTROL THIS SITUATION?? our process chains are locked for modification..so, we cannot even re-schedule them in prod system.....
         aaaaaah! can any one HELPP MEEEEE@
I will award full points for your suggestion

Hi,
when you'll restart you SAP system all jobs will be displayed with a delay since they didn't run during your downtime.
And that's true that they will be queued and fired as soon as a system resource will be available. That means a lot of paralel processes with system overload and usually subsequent errors in loading data.
As per suggested already, the best would be to shift the scheduling.
Another option is to execute the report BTCTRNS1 before shutting the system down. This will change all background job status to a "suspended" mode.
when your system is up again you will be able to release (or reschedule or cancel or any other action) single jobs in a controlled manner.
When you've finished with this task then don't forget to run BTCTRNS2 in order to enable background jobs to be executed.
hope that helps...
Olivier.

There was an error trying to get the status of the job. 1: The server returned an error processing CloseJob: Stack empty.

Hi
While trying to perform the operation 'Annul All Below' in DRM 11.1.2.1, I received the following error: There was an error trying to get the status of the job. 1: The server returned an error processing CloseJob: Stack empty.
Has anyone seen this error before, and does anyone know what the fix is?
Thanks,

Just giving my view on this.
When you try to restore a Version backup file, you get this error.
This is a known defect. The problem is caused by missing values in properties like AddedOn, AddedBy, which may occur when a version is copied with 'Clear Changed Properties' selected.
this is a known bug
but to workaround - Blend the affected version into a new, empty version, which will populate the 'ChangedOn' properties. You can then back up this version and it will restore.
Thanks,
~KKT~

Table for user status field in CJ20n transaction project defination

HI ALL,
what is table for user status field in CJ20n transaction project defination creation. This field is in Basic Data tab.
Thanks.

Hi,
Check following tables for Usre status:
TJ30 - User status
TJ30T - Texts for user status
TJ20 - Status profile
JEST - Object status
JSTO- WBS status profile.
Check this code:
REPORT zps_get_userstatus .
PARAMETERS: p_posid LIKE prps-posid.
*-- Constants
CONSTANTS: gc_yes(1) TYPE c VALUE 'X',
 gc_no(1) TYPE c VALUE ' '.
*-- Variables
DATA: l_objnr LIKE prps-objnr.
*-- Internal tables
DATA: BEGIN OF lit_jest OCCURS 0,
 objnr LIKE jest-objnr,
 stat LIKE jest-stat,
 END OF lit_jest.
DATA: BEGIN OF lit_jsto OCCURS 0,
 objnr LIKE jsto-objnr,
 stsma LIKE jsto-stsma,
 END OF lit_jsto.
DATA: BEGIN OF lit_status OCCURS 0, "Combination of JEST & JSTO
 objnr LIKE jest-objnr,
 stsma LIKE jsto-stsma,
 stat LIKE jest-stat,
 END OF lit_status.
DATA: BEGIN OF lit_usrsta OCCURS 0, "Uer status for all wbs
 objnr LIKE jest-objnr,
 stsma LIKE jsto-stsma,
 stat LIKE tj30t-estat,
 txt04 LIKE tj30t-txt04,
 END OF lit_usrsta.
DATA: BEGIN OF lit_usrtxt OCCURS 0, "User Status text - TJ30T
 stsma LIKE tj30t-stsma,
 stat LIKE tj30t-estat,
 txt04 LIKE tj30t-txt04,
 END OF lit_usrtxt.
* get WBS object number
SELECT SINGLE
 objnr FROM prps
 INTO l_objnr
 WHERE posid = p_posid.
* get WBS active status from table JEST
SELECT
 objnr
 stat
 FROM jest INTO TABLE lit_jest
 WHERE objnr = l_objnr AND
 inact <> gc_yes.
* get WBS status profile from table JSTO
SELECT
 objnr
 stsma FROM jsto
 INTO TABLE lit_jsto
 WHERE objnr = l_objnr.
* combine JEST and JSTO table for user status
LOOP AT lit_jest.
IF lit_jest-stat CP 'E++++'.
 READ TABLE lit_jsto WITH KEY
 objnr = l_objnr.
 IF sy-subrc = 0.
 lit_status-objnr = lit_jest-objnr.
 lit_status-stsma = lit_jsto-stsma.
 lit_status-stat = lit_jest-stat.
 APPEND lit_status.
 ENDIF.
ENDIF.
CLEAR: lit_jsto, lit_status.
ENDLOOP.
* get text for user status
SELECT DISTINCT
 stsma
 estat
 txt04 FROM tj30t
 INTO TABLE lit_usrtxt
 FOR ALL ENTRIES IN lit_status
 WHERE stsma = lit_status-stsma AND
 estat = lit_status-stat AND
 spras = sy-langu.
Let me know if you have any question.
Regards,
RS

Table for filed status

Hi
what is the table for field status. I want to down load data for all the company code field sttus setting in the client. In which table i can get all the fields setting for the field status.
CHEERS

Hello,
Your question is not clear.
There are number of field statuses in company codes.
You can see the field status groups details in table T004F
If you can elaborate your requirement, I can give you more details.
Regards,
Ravi

Table for User Status Profile

hi
Please tell anybody what is the table for User Status Profile in Sales Orders? where it will stores?
Regards
Rajendra

Hi,
Use table JEST
Here you will have to enter the object number as an input field
Get object number from table VBAK or VBAP based on whether the status profile is attached at sales order header or at sales order item.
Status which is active will start with letter E and the status inactive flag will be blank.
Regards
Ravi

Reg: Tables to findout status of Batchman jobs

Similar Messages

Maybe you are looking for