Reg. TAXINN in our ides system
Dear All
There is no TAXINN procedure in our ides. How to bring. Please help me.
Thanks
Rajj
Hi,
Even you can use TAXINJ, if you want TAXINN the you need to copy from TAXINJ and modify condition type and account key based on your requirement, at the same time account assignement should be done with respective GL accounts in T.code"OB40"..
Thanks,
Vasu..
Similar Messages
-
TIME_OUT in VK13 / VK33 on IDES system
We are receiving the following timeout when running VK13 and VK33 on our IDES system. This is standard code, and there is no notes regarding this TIME_OUT.
The Termination occurred in the ABAP program "SAPLV12A" - i
"ACCESS_REPORT_GENERATE".
The main program was "SAPMV13A ".
The whole ST22 dump is as follows:
Runtime Errors TIME_OUT
Date and Time 18.08.2010 19:35:25
Short text
Time limit exceeded.
What happened?
Error analysis
If you have access to SAP Notes, carry out a search with the following
keywords:
"TIME_OUT" " "
"SAPLV12A" or "LV12AU07"
"ACCESS_REPORT_GENERATE"
System environment
SAP-Release 700
Application server... "sap6ides"
Network address...... "10.3.3.125"
Operating system..... "Windows NT"
Release.............. "5.2"
Hardware type........ "2x AMD64 Level"
Character length.... 16 Bits
Pointer length....... 64 Bits
Work process number.. 3
Shortdump setting.... "full"
Database server... "sapC10ides"
Database type..... "ADABAS D"
Database name..... "C10"
Database user ID.. "SAPC10"
Char.set.... "C"
SAP kernel....... 700
created (date)... "May 22 2007 00:12:17"
create on........ "NT 5.2 3790 Service Pack 1 x86 MS VC++ 14.00"
Database version. "SQLDBC 7.6.0.035 CL 139084 "
Patch level. 111
Patch text.. " "
Database............. "MaxDB 7.6, MaxDB 7.7"
SAP database version. 700
Operating system..... "Windows NT 5.0, Windows NT 5.1, Windows NT 5.2, Windows
NT 6.0"
Memory consumption
Roll.... 16192
EM...... 16759360
Heap.... 0
Page.... 2342912
MM Used. 4880016
MM Free. 3496816
User and Transaction
Client.............. 800
User................ "MEASLE"
Language key........ "E"
Transaction......... "VK13 "
Program............. "SAPLV12A"
Screen.............. "SAPMV13A 0100"
Screen line......... 24
Information on where terminated
Termination occurred in the ABAP program "SAPLV12A" - in
"ACCESS_REPORT_GENERATE".
The main program was "SAPMV13A ".
In the source code you have the termination point in line 177
of the (Include) program "LV12AU07".
Source Code Extract
Line SourceCde
147 dff_desc_ref_field = dd08v_tab-reffldname
148 EXCEPTIONS
149 OTHERS = 1.
150 IF sy-subrc NE 0.
151 CLEAR: dd08v_tab-txttabname,
152 dd08v_tab-reffldname,
153 dd08v_tab-txtfldname.
154 ENDIF.
155 * und aufnehmen
156 READ TABLE dd08v_tab WITH KEY tabname = dd08v_tab-tabname
157 fieldname = dd08v_tab-fieldname
158 TRANSPORTING NO FIELDS.
159 IF sy-subrc EQ 0.
160 MODIFY dd08v_tab INDEX sy-tabix
161 TRANSPORTING txttabname reffldname txtfldname
162 arbgb msgnr.
163 ELSE.
164 APPEND dd08v_tab.
165 ENDIF.
166 LOOP AT dd05m_tab WHERE
167 tabname = t681-kotab AND fieldname = xt681e_tab-sefeld.
168
169 READ TABLE dd03v_tab INDEX dd05m_tab-primpos.
170 IF sy-subrc = 0 AND dd03v_tab-datatype NE 'CLNT'.
171 MOVE-CORRESPONDING dd05m_tab TO dd05v_sel.
172 dd05v_sel-forfldname = dd03v_tab-fieldname.
173 IF dd08v_tab-reffldname IS INITIAL.
174 dd05v_sel-reffldname = dd03v_tab-fieldname.
175 ELSE.
176 TABLES dd05p.
>>>>> SELECT * FROM dd05p
178 WHERE tabname = dd08v_tab-txttabname
179 AND fieldname = dd08v_tab-reffldname
180 AND checktable = dd08v_tab-checktable
181 AND checkfield = dd03v_tab-fieldname.
182 dd05v_sel-reffldname = dd05p-forkey.
183 EXIT.
184 ENDSELECT.
185 IF sy-subrc = 4.
186 dd05v_sel-reffldname = dd08v_tab-reffldname.
187 ENDIF.
188 ENDIF.
189 APPEND dd05v_sel.
190 ENDIF.
191 ENDLOOP.
192 ENDIF.
193 IF NOT dd08v_tab-txttabname IS INITIAL AND
194 NOT dd08v_tab-txtfldname IS INITIAL.
195 * Fremdtabelle lesen (Text)
196 CALL FUNCTION 'RV_TABLE_READ'
2
0
0
0> Database version. "SQLDBC 7.6.0.035 CL 139084 "
You seem to use a VERY OLD MaxDB database software.
I suggest:
- Update your MaxDB to a recent release, the version you use is very old.
- Update your database statistics to make sure the access paths for the data is optimal
- check the database parameters against Note 814704 - MaxDB Version 7.6 parameter settings for OLTP/BW
If you still use the default settings that came with the installation then it's rather obvious why your system is so slow.
Markus -
Implementing UCES in SAP ISU- IDES system
Hi,
We are interested to implement UCES in SAP ISU - IDES system which we have for our internal competency and Customer POCs/Demos. ( ECC 6 with ISU)
Could any body please share their experience or knowledge on this, that would be of very helpfull.
Many Thanks
RajaHi,
There is something called UCES - Biller Direct where is there is an Interaction Between SAP Biller Direct and Contract Accounts Receivable and Payable.
Purpose:You should use SAP Biller Direct if you want to present information about customer accounts in your Internet portal and offer your customers the option of paying bills or of creating inquiries and complaints via the Internet.
Implementation Considerations : Your customer does not need to install any SAP software to be able to use SAP Biller Direct. All functions can be carried out using a standard Web browser.
Information on the necessary system requirements and the browsers supported by SAP Biller Direct can be found in the introductory sections of the installation guide.
SAP Biller Direct consists of an application based on JavaServer Pages. The accounting system runs on a standard application server and is used as the back end for SAP Biller Direct. The transfer of data between the front end and back end is done by RFC and is ensured using the SAP Java Connector (JCO), which you install as part of the SAP middleware.
Award points if this is found useful. -
Company data missed in SAP IDES system
Hi friends,
In our SAP IDES ECC 6.0 EHP 5 system some data had missed(some plants had missed) in 800 client, I checked 000 client here also no data..we don't have any backup. If I download the IDES from market place, then is it possible to get entire data of 000 & 800 clients. Could you please any one help me how to get our data back..
Thanks in Advance
Regards,
Venkatesh BHi,
Thanks for your replay.
Finallyw e decided to reinstall IDES.. now my doubt is, what is the difference between sap IDES system installation and normal sap installation..
and what softwares need to dowload for ides..
and if any one have full ides installation guide please share me..
Regards,
Venkat -
We have installed a SAP ERP IDES system but we'd like to try out Simple Finance. We could do a fresh install of ERP but we like the demo data included in IDES system. Is there a simple SAP supported way of migrating our system (or data to be precise)?
No. In down sampling with iTunes a new file is created and added to the library. Most of the old data are preserved but some such as date added are created when the track is added.
Using a third party tool may achieve what you want because the new file could overwrite the old one. I recall using a third party tool to edit a mp3 and overwrite the old file. iTunes was tricked into thinking the replacement was still the original file, but of course the edits were in place. I can't make a specific application recommendation for bulk conversion where it will overwrite the old file.
I will regard this as a general iTunes question but in general if you are using beta software versions you should not be posting in the main iTunes forum. -
Hi all,
Is it possible to upgrade a IDES system BW 3.1c system to BI 7.0..?
thank you,Hi Lakshmi,
We practiced the upgrade (2.1 to 3.5) on our development system.
We did a refresh (copy production), practiced our upgrade, made a log and refeshed again.
Until we had a scenario that was perfect we kept on doing so.
The upgrade of production succeeded in the end within 3 days downtime for the users.
Udo -
Hi all,
I am doing a IDES system copy. I ran the report SMIGR_CREATE_DLL , the export activities have been completed successfully as well on the source system. Now on the target system, during the import, I am getting the following error in the log file SAPDFACT.log.
(DB) ERROR: DDL statement failed
(CREATE INDEX "/BI0/E0RSTT_C06~P" ON "/BI0/E0RSTT_C06" ( "KEY_0RSTT_C06P" , "KEY_0RSTT_C06T" , "KEY_0RSTT_C06U" , "KEY_0RSTT_C061" , "KEY_0RSTT_C062" , "KEY_0RSTT_C063" , "KEY_0RSTT_C064" , "KEY_0RSTT_C065" , "KEY_0RSTT_C066" , "KEY_0RSTT_C067" , "KEY_0RSTT_C068" ) TABLESPACE PSAPSR3 STORAGE (INITIAL 65536 NEXT 0000002560K MINEXTENTS 0000000001 MAXEXTENTS 2147483645 PCTINCREASE 0 ) NOLOGGING COMPUTE STATISTICS )
DbSlExecute: rc = 99
(SQL error 1408)
error message returned by DbSl:
ORA-01408: such column list already indexed
(DB) INFO: disconnected from DB
The owner for this table is SAPSR3. Some oracle forums suggested to drop the index before recreating it. But when i do "drop index SAPSR3."/BI0/E0RSTT_C06~P..it says.."the specified index does not exist". But when I go to recreate this index, it doesn get created successfully. After that when I re-run the import, it again fails. Suprisingly..now if i go to check if this index is present thru a sql querry:
select owner, object_name, object_type from dba_objects where object_name='SAPSR3."/BI0/E0RSTT_C06~P"', it tells "no rows selected". This is happening everytime, I create an index, where it gets created successfully, and the import again fails with the same error in SAPDFACT.log.
I found an SAP note 885441 named..common errors during migration..although mine isnt a migration..my both source and destination are Red hat 64 bit platform.
The note 1st asks to download the latest R3load..which I did and extracted in the kernel directory of the source..then it also asked to edit the .TSK file..in my case..SAPDFACT.TSK..where the lines:
I /BIC/E<Cubename>~<index> C err
to I /BIC/E<Cubename>~<index> C ign..
I did that..this time..the import again fails..but in the SAPDFACT.log..it complains about some other index..n the same gets generated in the .TSK file as well..the earlier index error is not again generated.
I am not sure..what is going wrong..my export went through successfully.i have done the prep steps for export as well..before that i ran the SMIGR_CREATE_DLL report as well..
Any inputs are highly appreciated..
Thanks,
AkshayHi,
Check SAP Note 1166589 - Table converter: DB error when creating secondary indexes
Thanks
Sunny -
SAPUSER is locked in ECC 6.0 IDES SYSTEM
Hi Everyone,
I installed ECC 6.0 IDES SYSTEM, but the username SAPUSER is locked, I tried with various passwords but was not successfull. Is there any other way I can logon into it with this username or any other super username. Please help.
thanks,
Prashant.Hi techno guys,
I have deleted the usr02 from sql table, and managed to logged in by Sap* and Password pass,
But when I try to do something I am getting a sql error message that I do not have access or something like that,
From SU01 also I couldnt create a username or unlock because same error page is coming..
plz tell me do i need to do something after deleting that usr02 row from the table?
plz advice me .. thanks -
Error when transporting Webservice from our DEV system to QA system
Hello, I created a web service from an rfc by following the wizard from Utilities>More Utilities> Create Web Service. This was created in our 030 client of DEV. I had to create two transports one client independent that was the VI and Service and one Client dependent for the actual webservice. I then transported the webservice to our DEV 200 client and all worked well. Next I transported both to our QA box, first the vi/Service transport then the webservice transport. This is not working, in our QA system, from wsadmin when trying to get the wsdl error is Could not determine wsdl address (ICF ERROR) and from wsconfig when I pull up the service definition and variant the status shows a red stop sign. Is there a trick to transporting this webservice to different systems?
I def award points for helpful answers
Cheers
Devlinhi,
I had this problem once and in my case the service wasn't activated in SICF.
so see your service tree under /sap/bc/srt/rfc/sap/<your_service> and probably it's inactive (grayed out). right klick and activate it.
anton -
XServe Mail Server not receiving emails from our phone system
Hi everyone,
Since late last year, staff haven't been receiving email notificiations to their work email (hosted by a 10.5.8 Xserve) of voice mail received by our 3COM NBX Phone System. However, if they provide any other email account, such as a Gmail account, they receive the email fine.
Our firewall providers have confirmed that there is nothing stopping the emails going in and out on their end. I've checked the server mail logs and can't find anything of value.
According to a forum thread, this is how our mail system sends an off-site notification via email:
1 - NCP performs an MX record lookup using DNS server IP information to return a valid TCP/IP address for each message being sent
2 - NCP acts as an MTA (Message Transfer Agent) - will directly contact each destination mail server for local delivery
3 - NCP establishes a TCP socket to the resolved TCP/IP address on SMTP port 25
4 - NCP must be able to open a TCP session to the resolved IP address of each destination email server
5 - Each destination server the NBX is sending email to may be configured for a rule base and based on certain criteria my reject an email or attachment that other email servers accept.
I'd appreciate any help you can provide.
Thankyou,
RhysI have no way of issuing that command from the "netSet".
Below is the link I found of the self service article on troubleshooting offsite notifications:
http://knowledge.3com.com/service/main.jsp;jsessionid=5CC7B2440667382AC7190A9665 9AC61D.selfservice1?t=solutionTab&ft=searchTab&ps=solutionPanels&locale=enUS&_dyncharset=UTF-8&curResURL=%2Fservice%2Fmain.jsp%3Bjsessionid%3D5CC7B2440667 382AC7190A96659AC61D.selfservice1%3FSearchButton%3DFind%26_dyncharset%3DUTF-8%26 locale%3DenUS%26t%3DsearchTab%26useFocusTopic%3Dtrue%26focusTopic%3D9029739%26searchstring% 3DNBX%252520-%252520Is%252520NAT%252520Supported%253f%26sfield%3D%26dosearch%3Dt rue%26pn%3D4&solutionId=1802&isSrch=Yes
I've tested the internal settings, the dig as we've established, and I've checked the server logs - they don't seem to show anything relating to the nbx.
The firewall has port 25 open to our mail server and phone system only.
-Rhys -
Unable to login to IDES system after client copy
Hi guys
the IDES system which i was using was working fine. I was trying CLient copy today morning and was trying to create a new client in the IDES system.
The client copy failed due to a shortdump in the process.
Now i am unable to login to the client 800 as it says the user password is incorrect.
How do i get back my 800 client? is there a way to get back the client 800 or do i have any other optionn to re-set the password without logging on to the client?
i do have access to client 000.
please guide me what should i do? i need the client 800 back and should be able to login too.hi,
i cannot login to client 800. I need to login first in the client 800 to go to su01 to re-set the password.
I want to login to client 800 which i am unable to do as a result of client copy. So the other option i am looking at is reset the password from client 000.
anyways thanks for your inputs
Hi guys,
any idea?
Edited by: Workflow learner on Jun 2, 2008 10:48 AM -
Download of pdf to our local system by using classes in webdynpro abap
hi,
I createa an application ,in that i converted Smartform to Pdf.I want to download the generated pdf to our local system by using "cl_wd_runtime_services" because we cant directly use FM GUI_DOWNLOAD directly.So can any one please tell me the process.Hi ,
see the below code..
call function 'CONVERT_OTF'
exporting
format = 'PDF'
importing
bin_filesize = pdf_size
bin_file = LV_PDF
tables
otf = lt_otfdata[]
lines = l_dummy
exceptions
err_max_linewidth = 1
err_format = 2
err_conv_not_possible = 3
others = 4.
if sy-subrc <> 0.
message id sy-msgid type sy-msgty number sy-msgno
with sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
endif.
lv_string = filename
cl_wd_runtime_services=>attach_file_to_response(
i_filename = LV_STRING
i_content = lv_pdf
i_mime_type = 'pdf/application'
i_in_new_window = abap_false
i_inplace = abap_false ).
this will open a popup same as when u download some file...
Regards
Yash -
Have to enter customer purchase orderswhich comes in xml in our SAP system
Hello to everyone
I am looking for easy "baby" example or a good source for an document which would describe it this way.
We will have to enter customer purchase orders in our SAP system(4.7 ext. 2). I know that data will come via xml files.
BUT how to realize that?
Thank you 1000 times in advanceHi Tina,
The Data from XML to SAP can be easily done using Business Connector..please go throgh these links for more details
http://www.sapgenie.com/mysap/bus_connector.htm
http://www.plurb.com/ebXML/Scalable...operability.pdf)
Srini -
How can I use telnet our Vxworks system?
Hello all: I am newly learning labview program ,now I want to use labview to make some actions and sent to our Vxworks system, this system support telnet server , I use Internet tool to finish this work ,but I met some questions, I didn’t succeed to login our Vxworks system. Vxworks system need a username and a password and finish a validation,please see my graph and VI.Can you help me solve this issue? Thanks in advance!
帖子被Tonny Tu在 05-22-2010 10:33 AM
时编辑过了
Tonny Tu
More Time,More Wish!
Attachments:
Control E1 Testcard.vi 10 KBCant you embed password and user in the address, as with ftp? (I dont have that telnet addon you're using)
Something like userassword@address?
/Y
LabVIEW 8.2 - 2014
"Only dead fish swim downstream" - "My life for Kudos!" - "Dumb people repeat old mistakes - smart ones create new ones."
G# - Free award winning reference based OOP for LV -
Hi,
Is it possible to configure SSO (single signon) between IDES system to SAP EP system.
ThankuI can't find a reason why not. did you tried it?
Regards
Juan
Maybe you are looking for
-
How do I get images from LR to windows file when it is saying they are offline or missing?
I loaded pictures to LR where I made some changes. They were jpegs. I deleted some in LR that went to recycle bin. Originals were in a windows file 2009-11-08. Since I did not see the LR changes in the windows pictures I decided to transfer LR images
-
Can you add a button to a report component (sql based) and add code to call a stored procedure or an application component). (form layout editor tab)
-
i type an add. the one in the bar is the one i want, the prefill list lists similar. if my mouse goes over the list, this idiot fkn browser picks the one my cursor went over, even when i reclick the add bar and the add shown there is not the one from
-
How to provide Security to Enterprise Archive
Hi All, I have a very queer requirement. Application security. Question : "Can we provide security to .ear (J2EE enterprise archive) file so that no body can open it except say the SYSTEM ?". The Need : Our's is a product based company, we give our a
-
When I start a phone call,nobody can hear my voice and viceversa. Only when I click on speaker , voice can be heard at both ends.