Reg: UNIX shell script at File Adapter

Hi all,
I am doing a File to file scenario and using command line arguments in Sending file adapter. I am using UNIX shell script ".sh" file for executing the command.
I gave the following path at "Run OS command before message processing" parameter:
/temp/xidelivery/send/FILOSC004_shell.sh
and this file contains following code:
<b>#!/user/bin/sh cp /temp/xidelivery/send/FILOSC004_in.txt /temp/xidelivery/send/FILOSC004_input_copy4.txt</b>
I put the source file, FILOSC004_in.txt and shell script files at the respective paths.
If I give "cp" command directly in command line it is working fine. But I could not execute this with shell script. Can any body give me the reason where I gone wrong.
Regards,
Pavani.

Hi,
can you try this,
bash /temp/xidelivery/send/FILOSC004_shell.sh
let me know.
hey you can check the blog below to catch the OS errors,
/people/michal.krawczyk2/blog/2005/08/17/xi-operation-system-command--error-catching
Prasad Babu.
Message was edited by:
PrasadBabu Koribilli

Similar Messages

Passing mulitple parameters to unix shell script via File adapter

Hi,
I have the following usecase.
I have a set of files A, B, C, D etc in a directory dir. I also have a EOT ( end of transaction file).
I need to merge this file once the EOT file is present in XI application server ( using NFS with File adpter).
I have a script which can take the following paramters:
1. EOT file name
2. File names for A,B,C,D
3. Directory names.
Is it possible to send muliple parameters to the unix script from the File adapter?
please share any blogs which do so.
Thanks in advance,
Best Regards
Abhishek

Hi,
You can always call script from file adapter using "OS command" functionality, pass additional parameter like you do in unix for existing script (exact command which you type on unix prompt).
Adapter will simply pass your OS command to operating system, so from XI point of view nothing is changed and it is your script which should take care of parameters.
Regards,
Gourav

Shell Scripts with File adapter

Hi Everyone,
Can we use shell scripts in File Adapter of XI.
If yes can someone give me the configuration and any helpful blogs or links.
Helpful answers will be rewarded points.
Thanks,
Rupash K

Hi,
you can just call the script in the File Adapter, before or after XI processing step.
Nevertheless, sometimes it behavior different between to call the script as to typ the command directly on the channel configuration.
Here is the [SAP official document|http://help.sap.com/saphelp_nw04/helpdata/en/84/e8763c997fda50e10000000a11405a/frameset.htm], it is quite easy to use. Just call the script as if you want to call it on the shell, you have to aware about the path and placeholder which you may want to pass the it as parameter to your script.
Here are some more links
https://www.sdn.sap.com/irj/scn/wiki?path=/display/xi/sapXIFileAdapterOSCommandLine+Feature
https://www.sdn.sap.com/irj/scn/wiki?path=/display/xi/morewiththeFileAdapter
regards,
Hai
Edited by: Hai Long on Nov 14, 2008 5:30 PM

Reg: Unix shell scripts

Hi all,
Can any body tell me
1) How to get file creation time and
2) whether the file exists or not in UNIX shell scripts
Regards,
Pavani

Hi Pavani,
Go through this blog, and as mentioned use "Add Time Stamp" to get the file creation time.
/people/sameer.shadab/blog/2005/09/21/executing-unix-shell-script-using-operating-system-command-in-xi
Regards,
Sarvesh

How to read specific line in a file through UNIX shell script..

Dear Friends,
I have generated .ldt file under admin/import/US folder through FND_LOAD script for Download the responsibility.
I registred Shell script (Host concurrent program) in Oracle apps. Now i want to read the file in speciific line which i was generated in admin/import/US folder through unix shell script. Please help me how to read specific line and the i want to replace that which i am going to read the specific line.
Thanks in advance..
Regards,
Velu.

Hi,
Thanks for reply,
My requirement i have to find the specific line in a file and find and replace needed word over there it's should happen programatically. i want to read specific line in a file Once complete find and replace the condition should exists. The loop will go to next file and read the same line in next file also do the same process upto how many files over there.i am doing through UNIX shell script. Please help me out to find the
Your suggestion is highly appriciated.
Thanks,
Velu.

Can I call host file ( Unix Shell script ) from Oracle 10g trigger

Hi,
I am new to Oracle 10g. Can I call host file ( unix shell script ) from Oracle 10g trigger ?. I know it is possible. Pl explain me with small example
thanks & regards
parag

user12009546 wrote:
Hi,
I am new to Oracle 10g. Can I call host file ( unix shell script ) from Oracle 10g trigger ?. I know it is possible. Pl explain me with small example
thanks & regards
paragIf you are in 10g, you can simple call shell script from DBMS_SCHEDULER:
BEGIN
DBMS_SCHEDULER.CREATE_JOB (
job_name => 'TEST_SCRIPT',
job_type => 'EXECUTABLE',
job_action => 'PATH_OF_YOUR_SCRIPT',
start_date => SYSDATE,
repeat_interval => 'FREQ=MINUTELY; INTERVAL=1',
enabled => TRUE,
comments => 'Shell script from Oracle'
END;
/

Command Line Scripts in File Adapter

Hi,
In the file adapter, does the command line script support "PERL" Scripts.
thanks.
Krishnan

YES It will support.
For clarification check below one.
/people/sameer.shadab/blog/2005/09/21/executing-unix-shell-script-using-operating-system-command-in-xi
FTP channel - not processing files, coz one of the files is wrong,

Calling a report from unix shell script

Hi,
I had to call a report from unix shell script.
May i know the procedure to accomplish this
Thanks in Advance
A.Gopal

First you should not include the whole path to your report in the call ...
Use like this:
/ora/u01/oracle/v101/as2/bin/rwrun.sh report=an_stati destype=file desname=/ora/u01/oracle/v101/as2/test.pdf desformat=pdf
In $ORACLE_HOME/bin/reports.sh:
1) Verify that you have updated the REPORTS_PATH variable to include your folder where you have the report in question
REPORTS_PATH=/ora/u20/app/qits/env1/run:$ORACLE_HOME/reports/templates:$ORACLE_HOME/reports/samples/demo: ....
2) Verify that the REPORTS_TMP variable is pointing to a valid location and that the oracle user has access to write on it.
After that, post the content of the tracefile located at $ORACLE_HOME/reports/logs/{in-process report server name folder}/rwserver.trc
If no file is present then it means that you need to enable trace in your reports's conf file.... go to the $ORACLE_HOME/reports/conf folder and and locate the .conf file that correspond to your in-process reports server name (as specified in the rwservelet.properties file)... open/edit the file to enable trace logs ..
i.e.
Change the following line:

to <trace traceOpts="trace_all"/>
Bounce the reports server and try to run the report again, this time the .trc file should be generated, post the content so that we can take a look.

Error while trying to execute a unix shell script from java program

Hi
I have written a program to execute a unix shell script in a remote machine. I am using J2ssh libraries to estabilish the session connection with the remote box.The program is successfully able to connect and authenticate with the box.
The runtime .exec() is been implemented to execute the shell script.I have given below the code snippet.
try {
     File file_location = new File("/usr/bin/");
     String file_location1 = "/opt/app/Hyperion/scripts/daily";
     String a_mib_name = "test.sh";
     String cmd[] = new String[] {"/usr/bin/bash", file_location1, a_mib_name};
     Runtime rtime = Runtime.getRuntime();
     Process p = rtime.exec(cmd, null, file_location);
System.out.println( "Connected to the server1" );
BufferedReader br = new BufferedReader(new InputStreamReader(p.getInputStream()));
String line = br.readLine();
while(line !=null)
System.out.println(line);
line = br.readLine();
br.close();
p.getErrorStream ().close ();
p.getOutputStream().close();
int retVal = p.waitFor();
System.out.println("wait " + retVal);
//session.executeCommand("ls");
catch (IOException ex) {
I get an error message
Connected to the server
java.io.IOException: Cannot run program "/usr/bin/bash" (in directory "\usr\bin"
): CreateProcess error=3, The system cannot find the path specified
at java.lang.ProcessBuilder.start(Unknown Source)
at java.lang.Runtime.exec(Unknown Source)
at SftpConnect.main(SftpConnect.java:143)
Caused by: java.io.IOException: CreateProcess error=3, The system cannot find th
e path specified
at java.lang.ProcessImpl.create(Native Method)
at java.lang.ProcessImpl.<init>(Unknown Source)
at java.lang.ProcessImpl.start(Unknown Source)
I am sure of the file path where the bash.sh and test.sh are located.
Am i missing something? Any help would be greatly appreciated.
Thanks
Senthil

Hi, I am using a simple program to connect to a RMI server and execute shell script. I use the Runtime.exec aommand to do the same.
The script is sh /tmp/pub/alka/test.sh /tmp/pub/alka/abc/xyz/ul ul
The script when run from the server, gives no errors. But when ran using rthe above method in java, gives errors as follows,
Mycode:
String command = "/bin/sh /tmp/pub/alka/test.sh /tmp/pub/alka/abc/xyz/ul ul";
Runtime rt = Runtime.getRuntime();
Process proc = rt.exec(command);
int exitVal = proc.exitValue();
System.out.println("Process exitValue: " + exitVal);
java.io.IOException: CreateProcess: /bin/sh /tmp/pub/alka/test.sh /tmp/pub/alka/abc/xyz/ul ul error=3
     at java.lang.ProcessImpl.create(Native Method)
     at java.lang.ProcessImpl.<init>(Unknown Source)
     at java.lang.ProcessImpl.start(Unknown Source)
     at java.lang.ProcessBuilder.start(Unknown Source)
     at java.lang.Runtime.exec(Unknown Source)
     at java.lang.Runtime.exec(Unknown Source)
     at java.lang.Runtime.exec(Unknown Source)
     at DecryptTest.main(DecryptTest.java:18)
Can anyone please help

Error while executing unix shell script from java program

Hi All,
I am trying to execute unix shell script from a java program using Runtime.execute() method by passing script name and additional arguments.
Code snippet :
Java Class :
try{
     String fileName ="test.ksh";
     String argValue ="satish"; // value passed to the script
     String exeParam = "/usr/bin/ksh "+fileName+" "+argValue;
     Process proc = Runtime.getRuntime().exec(exeParam);
     int exitValue = proc.waitFor();
     sop("Exit Value is : "+exitValue);
catch(Exception e)
e.printStackTrace();
}Test.ksh
export -- application realated paths..
nohup abc.exe 1> test.log 2>&1;
$1
exit.By running the above java class , i am getting exit Value: 139 and log file test.log of 0 bytes.
when i am running the same command (/usr/bin/ksh test.ksh satish) manually, it's calling abc.exe file successfully
and able generate the logs properly.
Pls let us know where exactly i am stuck..
Thanks in advance,
Regards,
Satish

Hi Sabre,
As per the guidelines provided by the article, i had done below changes..
InputStream is = null;
InputStreamReader iStreamReader = null;
BufferedReader bReader = null;
String line = null;
try{
String fileName ="test.ksh";
String argValue ="satish"; // value passed to the script
String exeParam = "/usr/bin/ksh "+fileName+" "+argValue;
Process proc = Runtime.getRuntime().exec(exeParam);
is = proc.getErrorStream();
iStreamReader = new InputStreamReader(is);
bReader = new BufferedReader(iStreamReader);
System.out.println("<ERROR>");
while((line = bReader.readLine()) != null)
System.out.println("Error is : "+line);
System.out.println("</ERROR>");
int exitValue = proc.waitFor();
sop("Exit Value is : "+exitValue);
catch(Exception e)
e.printStackTrace();
Now , it's showing something like..
<ERROR>
</ERROR>

Need Help in creating Unix Shell Script for database

Would be appreciable if some one can help in creating unix shell script for the Oracle DB 10,11g.
Here is the condition which i want to implement.
1. Create shell script to create the database with 10GB TB SPACE and 3 groups of redo log file(Each 300MB).
2. Increase size of redolog file.
3. Load sample schema.
4. dump the schema.
5. Create empty db (Script should check if db already exists and drop it in this case).
6. Create backup using rman.
7. restore backup which you have backed up.

This isn't much of a "code-sharing" site but a "knowledge-sharing" site. Code posted me may be from a questioner who has a problem / issue / error with his code. But we don't generally see people writing entire scripts as responses to such questions as yours. There may be other sites where you can get coding done "for free".
What you could do is to write some of the code and test it and, if and when it fails / errors, post it for members to make suggestions.
But the expectation here is for you to write your own code.
Hemant K Chitale

Script in file adapter

Hi,
I have gone through the blog:https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/2411. [original link is broken] [original link is broken] [original link is broken]
I need to convert .xml to .csv ...
here in this blog it is said to use unix shell script and put in the path.
Our Os is windows 2003.How do i make and place the script and how will the script get recognised.
Kindly clarify.
Thanks,
srinivas

Hi srinivas,
In windows 2003 you can create a batch file (.bat) and trigger it from the XI file comm channel.
From the batch file you can call the pgm (.exe) which will do the required conversion.
FCC is another option http://help.sap.com/saphelp_nw04/helpdata/en/d2/bab440c97f3716e10000000a155106/content.htm
These are a collection of blogs on content conversion (both receiver and sender)
/people/venkat.donela/blog/2005/03/02/introduction-to-simplefile-xi-filescenario-and-complete-walk-through-for-starterspart1
/people/venkat.donela/blog/2005/03/03/introduction-to-simple-file-xi-filescenario-and-complete-walk-through-for-starterspart2
Chemmanz

Sending email attachments using unix shell script

hi
I want to send report generated my spooled file as attachment using unix shell script.
Can somebody help me out ?
many thanks

thanks a tonn it worked.
but i have another issue is it possible to add names in CC also ?
Also here is my code which spools the output of SP to a txt file. the File name is generated dynamically.
as shown below:
I need to send this generated file as attachement.
how do I do this? Here the shell script
=========================================================
#!/bin/sh
ORA_USER=scott
ORA_PWD=tiger
#Get the input parameter
if [ ! "$1" ]; then
STR="NULL"
else
STR="'"$1"'"
fi
#echo "exec pkg1($STR);"
#Connecting to oracle
sqlplus -s <<EOF
$ORA_USER/$[email protected]
---sql plus enviornment settings
set linesize 160
set pagesize 60
set serveroutput on size 1000000 for wra
set feedback off
set termout off
column dcol new_value mydate noprint
select to_char(sysdate,'YYYYMMDDHH24MISS') dcol from dual;
spool &mydate.report.txt
exec pkg1($STR);
spool off
EOF
exit
=========================================================
the file name will take sysdate as name so that every time a new file will be generated.
this file I need to send as attachment.
null

Please provide me unix shell script (export and import of database schema)

please i am new in unix
\please give me sample unix shell script (export and import of database schema)

please i am new in unix
\please give me sample unix shell script (export and import of database schema)Instead of providing you the readymade unix shell script for your requirement, I will give you the hints to prepare the same at your own.
Create a file with .sh extension.
# Specify and set all required Environment variables.
ORACLE_HOME, PATH, NLS_LANG, etc.,
# Use the export command with all clauses
export scott/tiger@orcl file=scott.dmp log=scott_emp.log
# Compress it.
compress scott.dmp
Refer any unix/linux documents for scripting basics.
http://www.bijoos.com/ora7/oracle_unix.htm
Regards,
Sabdar Syed.

Comment in Unix shell script

i have a doubt as to how to comment a line in a shell script as i have to do that in a config. file of Oracle 9i Application Server. Is it a "--" in a line. Please help.
regards

Try to use # as a comment in unix shell script.
The config files in Oracle AS are xml based so the comment
therefore is

Hope that helps.

Reg: UNIX shell script at File Adapter

Similar Messages

Maybe you are looking for