Reg:usage of table in popup window

hi all
i am using pop up window for opening very functionality of a button .but when i am using table ui element with type as input fields inside a pop up .when i click on button( details) this pop up is opening with table ui element but in this table as i want to enter experience details of an employee in this table at run time is my scenario.here the problem is this table though it is in the edit mode first row , it not allowing to enter the values in it.(cardinality i have changed to 1:n).
2)how to make all the rows of a table into input fields even though i have taken them as a input fields it showing in display mode .
can any one share ur knowledge on this
regards
Deepika

Hi,
Are you using normal table UI element or ALV.
If you are using the normal table, check the READ_ONLY property should be unchecked for TABLE property.
Also check at the INPUT edtior level.
Regards,
Lekha.

Similar Messages

Issue with records displaying in the advanced table in popup window oaf

Dear All,
I have a requirement as below.
I have a popup search page in that i am displaying the searched data in advanced table, but the issue is all the rows not displaying in the popup window because of poup window size, even i am not able to view the "Next" button in the table to proceed next records, can someone suggest me how to display the "NEXT" button in the table so the i can view all the records in the table.
or is it feasible to implement "SCROLLBAR" in the advanced table in popup window so that i can scroll vertically and horizontally to view records.
Thanks

Actually i have made a mistake, in my advanced table table property palllet i have mentioned maximum rows fetched 20 but in my page i was displaying 10 records only so thats why the navigation button not displaying,
Thnaks

How to pass value from report table to Popup window

suppose i have a report region
from query
"Select * from emp"
i need to get a popup when i click on the row,
i need all the columns should be displayed inthe popup window;
i have written javascript in the report template, by passing #COLUMN_VALUE#
the issue here is iam only getting the column on which i click,
is there any way to refer the next column ?
or am i doing it in wrong manner ?

Hi Mike,
Yes what you said is exactly correct ,
i have a query , but for that i need some PK { three columns } from the the page where this popup will be called,
i have three columns in the row which makes it as PK,
now how can i pass three columns from a page to popup ? provided if i click on the row of an table, i want that rows three column to be passed .

Table events lost after opening a popup window

In an advanced table , I have a column which shows a link. If this link is clicked , a new window opens which displays a popup window.
If the link is not clicked , I can traverse through the advanced table.
If I click on the link, I cannot navigate through the Advanced Table, The show hide does not work.
The new Window is being shown for the link using
a. A OALinkBean
b. The link bean Destination property is set using OA.jsp?xxx
c. The target frame is set to _blank.
Any suggestions on what could be the problem?

The pop up page is a read only page or ur doing some action events on the pop up page?Are you simultaneuosly doing action on pop up and base page?
--Mukul

Table never gets populated inside popup window on customer's site

I'm working on application in ADF (ADF BC, ADF Faces) with JDeveloper 11.1.1.4 (application deployed on customer's site in Weblogic Server 10.3.6)
and in one page I'm having a button behind which is a code to execute a query against a table whose data is going to be shown in popup window.
Query limits the number of records to be shown to 100 (in query: rownum <= 100).
In my development environment this works fine, but there is a problem on customer's site.
For the query to execute it takes about 20 seconds at the site of customer. After that in backing bean there is a code to show popup.
In the page - popup starts showing (it means that query ended) but never fetching data in the table (all the time there is a message - "Fetching data" like framework is retrieving it but nothing happens).
I have tested a query in SQL*plus - it returns data.
I couldn't find out what is the reason for such behaviour.
Do you have any suggestions what to try?
Thanks,
Nebojsa

I've found the reason for not populating table in popup.
Although there is a limitation to the number of rows displayed in table in the form of additional where clause: "rownum <=n" this part of where clause is added to the VO in overridden method: executeQueryForCollection.
Before executing this method framework is executing: getEstimatedRowCount which when executed for the first time through method getQueryHitCount executes a query against the database (select count(1) from... without my rowum <=n which is added to the query afterwards in above mentioned method executeQueryForCollection).
My question is: if I don't want to add rownum <= n at design-time, where it would be the best place to add it to the query so to avoid above described situation and to have that rownum <= n in place for the count query as well?
Nebojsa

Reg: Avoid DSM Terminator popup window in the Portal 7.0

Hello All,
Iam using EP 7.0 SP19. I used Lightweight desktop for the user and assigned default home role. I am getting a popup window in the right top corner with the message as below "Closing Session". I checked that using HTTP Watch, its loading the DSM Terminator Component. How to avoid the popup window ?
It will appear while I am clicking the role and also Logoff. Once whole page refresh means, popup will appeared.
Please help me for this.
Regards
Prakash T

Hi,
Did you search already ?
How to avoid DSM pop-up window in portal
Regards,
Koti Reddy

Reg: Internal popup window from multiple Views

HI All,
I have a Internal Popup window() from 5 views, I am able to open a window and close from view1(according to the docs from SDN).
I tried using the same logic in remaining views(2,3,4,5).
I am able to open but while closing the window event fired is going to CompController and return to the "Parent window" of the Popup. For view2,3,4,5 this not taken as a parent window. Please help me
Thanks
Nagaraju

Hi Naga,
Disable the parent iviews message area before calling the child(popup) window. Then you can get the message in the child(popup) window.
According to documentation, oldest (parent) message area would be used if there are more than one windows (in a layout).
see this thread also How to display messages in pop up windows?
PradeeP

Reg:Internal Popup Window:Error messages

Hi All,
I am using a Internal Popup Window, but the error messages of "Popup window" is shown in the "Parent Window" instead of showing in "Popup Window". please suggest me to get the Error messages in "Internal Popup Window"
Thanks
Nagaraju

Hi Naga,
Disable the parent iviews message area before calling the child(popup) window. Then you can get the message in the child(popup) window.
According to documentation, oldest (parent) message area would be used if there are more than one windows (in a layout).
see this thread also How to display messages in pop up windows?
PradeeP

TIP: Building Modal Popup Windows

Build Modal Popup Pages
Introduction
The following is based on the 'How To Document' - 'Build Custom Popup Pages'.
This How To will show the developer how to create Modal Popup windows with the ability to pass information back to the parent window.
Example Scenario
The example described in this how to adds a custom modal popup LOV to a form on the SCOTT.EMP table. Clicking the popup LOV link on the form page will popup a Modal LOV page that allows users to search by ENAME, JOB, and SAL. Selecting a value from this LOV page will close that popup LOV page and populate the ENAME, JOB, and SAL fields on the form page with the selected values. Additionally, had the user entered some data into the ENAME, JOB, and/or SAL fields on the form page, that data would be used in the initial search when the popup LOV page is first shown.
Step 1 - Create a simple form page on SCOTT.EMP
To create the form page, simply step through the HTML DB "Form on a Table or View" wizard against the EMP table accepting the defaults. For this example, create the form with a page number of one, and make sure to allow the ename, job, and sal fields to be editable. When the wizard completes, page 1 of the application should have the items P1_ENAME, P1_JOB, and P1_SAL on it as text fields.
Step 2 - Create a popup page with search fields
Next, create a page that's to be used as the popup window: Page 2. Ultimately, this page will have javascript, a report region, and some buttons. For now, though, just create a page 2 with the items P2_ENAME, P2_JOB, and P2_SAL on it as text fields.
Step 3 - Set Modal popup page header requirements
A) Modal windows by default cache the information they display. When creating a popup window which displays different information each time it is called or to allow searching the caching default must be switched off.
Add the following meta-tag to the "HTML Header" field of the page-level attributes screen for page 2 to accomplish this:
<META HTTP-EQUIV="Pragma" CONTENT="no-cache">
B) Modal windows by default open a new window when running any redirect calls. When creating a modal popup which passes back parameters to the parent window. The modal window has to be forced to fire redirect calls within its own window rather than open a new window for the redirect.
Add the following tag to the "HTML Header" field of the page-level attributes screen for page 2 to accomplish this:
<base target="_self">
Step 4 - Add Javascript call to the popup page
Because the popup page should filter its result set based on any values that the user might have entered onto the form page, you need to add a javascript function that would pass those values off. Add the following function to the "HTML Header" field of the page-level attributes screen for page 1 to accomplish this:
<script language="JavaScript" type="text/javascript">
function callMyPopup (formItem1,formItem2,formItem3) {
    var formVal1 = document.getElementById(formItem1).value;
    var formVal2 = document.getElementById(formItem2).value;
    var formVal3 = document.getElementById(formItem3).value;
    var url;
url = 'f?p=&APP_ID.:2:&APP_SESSION.::::P2_ENAME,P2_JOB,P2_SAL:' + formVal1 + ',' + formVal2 + ',' + formVal3 ;
// IE Browsers modal popup window
if (window.showModalDialog) {
    w = showModalDialog(url, window.self,"status:0; scroll:1; resizable:1; dialogWidth:25; dialogHeight:43");
    // w is an array returned from the modal popup containing the passback values
    if (w) {
      document.getElementById("P1_ENAME").value = w[0];
      document.getElementById("P1_JOB").value = w[1];
      document.getElementById("P1_SAL").value = w[2];
      document.getElementById("P1_SAL").focus();
else {
// mozilla based browsers modal popup window
w = open(url,"winLov","Scrollbars=1,resizable=1,width=800,height=600", modal="yes");
if (w.opener == null)
    w.opener = self;
w.focus();
</script>Though you don't need to know how to read javascript for this example, it helps to understand that this function only does one important thing: it opens a modal popup window of page two in our application while passing values to P2_ENAME, P2_JOB, and P2_SAL. It gathers those values to pass from the names of the HTML DB items provided to it. The call to this function will be added in the next step below.
Step 5 - Add a popup link next to the P1_SAL field on the form page
Add a link to the form page that will call the callMyPopup function above and pass it the values it needs. To do so, place the following HTML in the "Post Element Text" field attribute of the P1_SAL item:
<~a href="javascript:callMyPopup('P1_ENAME','P1_JOB','P1_SAL');">Click for LOV<~/a>NB. remove ~ from above when deploying
Step 6 - Add the LOV report to the popup page
The next step is to create a report on the popup page based on the values passed from the form on page one. The tricky part of this report is providing a means for the selected values to be passed back to the form page. This can be achieved by having a column of the report render as a javascript link that would close the popup window and pass the ename, job and sal values for that row back. Start by adding a simple report region to our Modal popup page that uses a query such as:
      select ename, job, sal , 'placeholder' the_link
        from emp
       where ename like '%'||:P2_ENAME||'%'
         and (job = :P2_JOB or :P2_JOB is null)
         and (sal = :P2_SAL or :P2_SAL is null)Note that the last column in this query is just a placeholder. once the region is created, turn that placeholder into a link by doing the following:
Navigate to the Page Definition for page 2
Next to the name of the report region created in step 6, Click Q
Next to the column THE_LINK, click the edit icon
In the "Link Text" field enter the string "select"
In the URL field enter: javascript:passBack('#ENAME#','#JOB#','#SAL#'); Click the "Apply Changes" button
Step 7 - Add the javascript function to the Modal popup page to pass selected values to the (parent) form page.
In the previous step you added a call to a javascript function, passBack. Now add that function to the top of Modal popup page 2. In the same manner as step 4 above, add that passBack function to the page 2 by putting it in the "HTML Header" field of the page-level attributes screen. The function should look similar to the following:
<script language="JavaScript">
   function passBack(passVal1, passVal2, passVal3)
     // IE Browser return the passback values in an array
     if (window.showModalDialog) {
       var retVal = new Array(passVal1, passVal2, passVal3);
       window.returnValue = retVal;
       window.close();
     // Mozilla based browsers right the passback values directly into the parent window
     else {
       opener.document.getElementById("P1_ENAME").value = passVal1;
       opener.document.getElementById("P1_JOB").value = passVal2;
       opener.document.getElementById("P1_SAL").value = passVal3;
       opener.document.getElementById("P1_SAL").focus();
       close();
</script>This function simply sets the values of P1_ENAME, P1_JOB, and P1_SAL with the values of the whatever's stored to the three HTML DB item names passed to it. It also closes the current window and puts the cursor back into the P1_SAL field.
Step 8 - Polishing
The basic functionality of this custom modal popup window has been created in steps 1 though 7. To make its usage a little more friendly, it's advisable to add Cancel and Search buttons to the popup window page. The Search button should just be added as a regular button that branches back to the page 2. Adding this button allows users to re-query for LOV options without having to return to our form page. The Cancel button should be created with an "Action" of "Redirect to URL". The "URL Target" of the button should be javascript:window.close(). As the code suggests, the Cancel button would just close the popup window (with no values returned).
Hope this is of use....

Everything said above is working fine but in Mozilla small popup is coming in top left corner of browser..
so please help me so that it is opened in proper width and height in mozilla.

Issue with displaying ALV in a popup window

Hi Experts,
I am trying to create an popup window with an ALV in it. TO display the ALV i have defined the component usage for SALV_WD_TABLE component.When the ALV is displayed for the first time it shows up correctly with required data. When i try to display ALV popup again only the popup window frame gets displayed the ALV is missing from the popup window.
If i refresh the main component by clicking browser refresh buttion and then click for ALV popup dsplay i get the correct popup display the first time and then agin the same issue.
Has anyone else come across this issue before. All your suggestions, responses are welcome.
Thanks,
Vivek

HI,
My popup window has only one embedded view, the TABLE view of used component SALV_WD_TABLE hence i cannot modify the TABLE view.
I tired putting the following code for context node initialization in both the the methods WDDOONOPEN and WDDOINIT of the window which has the embedded view. But it dosen't make any difference i face the same issue even with these changes.
types: begin of ty_belnr,
         belnr type vbkpf-belnr,
       end of ty_belnr.
data: lt_belnr type standard table of ty_belnr,
      lo_node type ref to if_wd_context_node,
      lo_element type ref to if_wd_context_element.
select belnr
from vbkpf
into table lt_belnr
where ausbk = 'UC'
   and bukrs = 'UC'
   and gjahr = '2011'
   and usnam = sy-uname.
if sy-subrc eq 0.
   lo_node = wd_context->get_child_node( 'DOC_NUMBERS').
   lo_node->bind_elements( new_items = lt_belnr[] ).
endif.
Edited by: Vivek Priyadarshi on Sep 14, 2010 5:24 PM

Help needed on table view popup

I have created custom popup(table view) and able to display the data in the same.
I have created the button(BT108H_LEA/LeadOVViewSet) in the toolbar in lead overview screen in web ui and when I clicks the button popup is triggering.
I want to transfer the selected record from popup to products assignment block in the overview.
Please help me how to transfer the data from popup to products.
What I did:
1.     I have created the custom view(popup view) and context node in the component BT108H_LEA.
2.     Created the new window (pop window)and embed the popup view in the runtime repository.
3.     Added in the interface view as pop window.
4.     Created Component Usages with the popup window.
5.     Triggering the popup when the user clicks the button and populating the data in the popup in DO_PREPARE_OUTPUT method of custom view(popup view).
6.     Now I want to transfer the data from popup to products assignment block.
Example: popup data
item     product
10     Mat100
If I select row from the above popup how to fill the data in the below component(view).
Products assignment block in the lead.
item     product     qty     UOM     description
Thanks,
Venkat

You would have to use the outbound plugs to transfer data from your component to the other component. Here you have a parameter IV_DATA_COLLECTION. Fill the entries you want to fill here.
Check the Sold to Party pop up while creating Quotation for Sales cycle when you log in with SALESPRO.
Regards
Kavindra
Edited by: joshi_kavindra on Nov 23, 2011 5:03 PM

How to get the values from popup window to mainwindow

HI all,
   I want to get the details from popup window.
      i have three input fields and one search button in my main window. when i click search button it should display popup window.whenever i click on selected row of the popup window table ,values should be visible in my main window input fields.(normal tables)
   now i am able to display popup window with values.How to get the values from popup window now.
   I can anybody explain me clearly.
Thanks&Regards
kranthi

Hi Kranthi,
Every webdynpro component has a global controller called the component controller which is visible to all other controllers within the component.So whenever you want to share some data in between 2 different views you can just make it a point to use the component controller's context for the same. For your requirement (within your popups view context) you will have have to copy the component controllers context to your view. You then will have to (programmatically) fill this context with your desired data in this popup view. You can then be able to read this context from whichever view you want. I hope that this would have made it clear for you. Am also giving you an [example|http://****************/Tutorials/WebDynproABAP/Modalbox/page1.htm] which you can go through which would give you a perfect understanding of all this. In this example the user has an input field in the main view. The user enters a customer number & presses on a pushbutton. The corresponding sales orders are then displayed in a popup window for the user. The user can then select any sales order & press on a button in the popup. These values would then get copied to the table in the main view.
Regards,
Uday

How to delete the row from the ADF table using popup box

Hi,
I have one requirement like need to delete a record from the table, but that time need to show one popup window for confirmation of the deletion. I am using Delete buttom from the vo operations. I am able to delete the row with out popup but when i used the popup that time deletion is not happening.
Can any one help me in this.
Regards,

Issue was resolved.

Need help with a popup window problem

I have this code within my certAppB.js page :
function AppSubmit() {
     str1 = "Submitting this form will begin the approval process.";
     str2 = "You will not be able to come back to this form to edit it again.";
     str3 = "Do you want to continue submitting this form?";
     if((confirm(str1 + "\n" + str2 + "\n" + str3))){
          document.forms[0].status.value="Submitted";
          document.forms[0].submit();
Which produces a popup windows that says:
Submitting this form will begin the approval process
You will not be able to come back to this form to edit it again
Do you want to continue submitting this form?
OK Cancel (these are 2 buttons)
I want to change this to say:
Submitting this form will begin the approval process. You will not be able to change this form once submitted. You also agree that the following statement is true and correct to the best of your knowledge and belief:
"I, [User Name], hereby certify and state on behalf of [Company Name] that the energy use data contained on this form are accurately determined and stated in accordance with federal test procedures set forth in 10 CFR Part 430 or 431, or 42U.S.C.�6314, as applicable, including authorized waivers, as they currently exist on [Date]."
Do you want to continue submitting this form?
OK           Cancel
So I have to pull the users [User Name], [Company Name], and the [Date].
On the approverView.jsp login page ( which is the first login page users see after loggin) it shows
the users full name, so I nabbed the code from that page:
<body>
<jsp:include page="logo.jsp" />
<jsp:include page="unav-navigate.jsp" />
<table width="100%" border="0" cellspacing="0" cellpadding="5" class="info">
<tr>
<td width="25%" valign="top">
<logic:present name="UserContainer" property="userView" scope="session">
<span class="welcome">Welcome
<bean:write name="UserContainer" property="userView.firstName" scope="session"/>
<bean:write name="UserContainer" property="userView.lastName" scope="session"/>
!</span><br>
</logic:present>
<span class="sm">If you are not this person, please click <html:link styleClass="norm" href="/fake_name/logoff.do">here</html:link>.</span></td>
<td width="2%"> </td>
<td width="73%" valign="top"><jsp:include page="instruction.jsp" /></td>
</tr>
</table>
and made this code out of it to pull the username,companyname:
<logic:present name="UserContainer" property="userView" scope="session">
<span class="User"> User
<bean:write name="UserContainer" property="userView.firstName" scope="session"/>
<bean:write name="UserContainer" property="userView.lastName" scope="session"/>
!</span><br>
</logic:present>
<logic:present name="UserContainer" property="userView" scope="session">
<span class="Company">Company
     <bean:write name="UserContainer" property="userView.companyName" scope="session"/>
!</span><br>
</logic:present>
This is the userView.java page that is referanced :
* Created on Mar 28, 2003
* To change this generated comment go to
* Window>Preferences>Java>Code Generation>Code Template
package org.fake.name.view;
import java.io.Serializable;
import java.util.List;
import org.gama.cafs.businessobjects.TorqueDb;
* @author chris
public class UserView implements Serializable {
     private int userId;
     private int memberId;
     private int companyId;
     private String role;
     private String firstName;
     private String lastName;
     private String companyTitle;
     private String emailAddress;
     private String phoneNumber;
     private String companyName;
     private String address1;
     private String address2;
     private String address3;
     private String city;
     private String state;
     private String province;
     private String postalCode;
     private String countryName;
     private List productTypes = null;
     private List productTypeAcronyms = null;
     private List productTypeIds = null;
     private List tradeNameIds = null;
     private List tradeNames = null;
     private TorqueDb torqueDb = null;
     public UserView() { }
     * @return String
     public String getAddress1() {
          return address1;
     * @return String
     public String getAddress2() {
          return address2;
     * @return String
     public String getAddress3() {
          return address3;
     * @return String
     public String getCity() {
          return city;
     * @return String
     public String getCompanyName() {
          return companyName;
     * @return String
     public String getCompanyTitle() {
          return companyTitle;
     * @return String
     public String getCountryName() {
          return countryName;
     * @return String
     public String getEmailAddress() {
          return emailAddress;
     * @return String
     public String getFirstName() {
          return firstName;
     * @return String
     public String getLastName() {
          return lastName;
     * @return int
     public int getMemberId() {
          return memberId;
     * @return String
     public String getPhoneNumber() {
          return phoneNumber;
     * @return String
     public String getPostalCode() {
          return postalCode;
     * @return Set
     public List getProductTypes() {
          return productTypes;
     * @return String
     public String getProvince() {
          return province;
     * @return String
     public String getRole() {
          return role;
     * @return String
     public String getState() {
          return state;
     * @return int
     public int getUserId() {
          return userId;
     * Sets the address1.
     * @param address1 The address1 to set
     public void setAddress1(String address1) {
          this.address1 = trimString(address1);
     * Sets the address2.
     * @param address2 The address2 to set
     public void setAddress2(String address2) {
          this.address2 = trimString(address2);
     * Sets the address3.
     * @param address3 The address3 to set
     public void setAddress3(String address3) {
          this.address3 = trimString(address3);
     * Sets the city.
     * @param city The city to set
     public void setCity(String city) {
          this.city = trimString(city);
     * Sets the companyName.
     * @param companyName The companyName to set
     public void setCompanyName(String companyName) {
          this.companyName = trimString(companyName);
     * Sets the companyTitle.
     * @param companyTitle The companyTitle to set
     public void setCompanyTitle(String companyTitle) {
          this.companyTitle = trimString(companyTitle);
     * Sets the countryName.
     * @param countryName The countryName to set
     public void setCountryName(String countryName) {
          this.countryName = trimString(countryName);
     * Sets the emailAddress.
     * @param emailAddress The emailAddress to set
     public void setEmailAddress(String emailAddress) {
          this.emailAddress = trimString(emailAddress);
     * Sets the firstName.
     * @param firstName The firstName to set
     public void setFirstName(String firstName) {
          this.firstName = trimString(firstName);
     * Sets the lastName.
     * @param lastName The lastName to set
     public void setLastName(String lastName) {
          this.lastName = trimString(lastName);
     * Sets the memberId.
     * @param memberId The memberId to set
     public void setMemberId(int memberId) {
          this.memberId = memberId;
     * Sets the phoneNumber.
     * @param phoneNumber The phoneNumber to set
     public void setPhoneNumber(String phoneNumber) {
          this.phoneNumber = trimString(phoneNumber);
     * Sets the postalCode.
     * @param postalCode The postalCode to set
     public void setPostalCode(String postalCode) {
          this.postalCode = trimString(postalCode);
     * Sets the productTypes.
     * @param productTypes The productTypes to set
     public void setProductTypes(List productTypes) {
          this.productTypes = productTypes;
     * Sets the province.
     * @param province The province to set
     public void setProvince(String province) {
          this.province = trimString(province);
     * Sets the role.
     * @param role The role to set
     public void setRole(String role) {
          this.role = trimString(role);
     * Sets the state.
     * @param state The state to set
     public void setState(String state) {
          this.state = trimString(state);
     * Sets the userId.
     * @param userId The userId to set
     public void setUserId(int userId) {
          this.userId = userId;
     * @return List
     public List getProductTypeAcronyms() {
          return productTypeAcronyms;
     * Sets the productTypeIds.
     * @param productTypeIds The productTypeIds to set
     public void setProductTypeAcronyms(List productTypeAcronyms) {
          this.productTypeAcronyms = productTypeAcronyms;
     public List getProductTypeIds() {
          return productTypeIds;
     public void setProductTypeIds(List productTypeIds) {
          this.productTypeIds = productTypeIds;
     private String trimString(String str) {
          String tmp = null;
          if (str != null)
               tmp = str.trim();
          else
               tmp = str;
          return tmp;
     public List getTradeNameIds() {
          return tradeNameIds;
     public List getTradeNames() {
          return tradeNames;
     public void setTradeNameIds(List list) {
          tradeNameIds = list;
     public void setTradeNames(List list) {
          tradeNames = list;
     public TorqueDb getTorqueDb() {
          return torqueDb;
     public void setTorqueDb(TorqueDb db) {
          torqueDb = db;
     public int getCompanyId() {
          return companyId;
     public void setCompanyId(int i) {
          companyId = i;
Question:
How do I insert the code I assembled:
<logic:present name="UserContainer" property="userView" scope="session">
<span class="User"> User
<bean:write name="UserContainer" property="userView.firstName" scope="session"/>
<bean:write name="UserContainer" property="userView.lastName" scope="session"/>
!</span><br>
</logic:present>
<logic:present name="UserContainer" property="userView" scope="session">
<span class="Company">Company
     <bean:write name="UserContainer" property="userView.companyName" scope="session"/>
!</span><br>
</logic:present>
INTO the function:
function AppSubmit() {
     str1 = "Submitting this form will begin the approval process.";
     str2 = "You will not be able to come back to this form to edit it again.";
     str3 = "Do you want to continue submitting this form?";
     if((confirm(str1 + "\n" + str2 + "\n" + str3))){
          document.forms[0].status.value="Submitted";
          document.forms[0].submit();
So that the popup window will show the [username], [CompanyName], [Date]. I can�t find any doc�s on how to insert logic into a function with str�s.
Any help would be very much appreciated. Thanks in advance.
Applications used by me: Sun solaris 8 server, Tomcat 4.1.24, pulling from postgresql 7.3, and I edit in Eclipse 2.11.

These two tags:
<logic:present name="UserContainer" property="userView" scope="session">
</logic:present>
surround things you only want to happen if there is a userView object present.
This tag:
<bean:write name="UserContainer" property="userView.firstName" scope="session"/>
is replaced with the value of userView.getFirstName().
So:
<logic:present name="UserContainer" property="userView" scope="session">
<span class="User"> User
<bean:write name="UserContainer" property="userView.firstName" scope="session"/>
<bean:write name="UserContainer" property="userView.lastName" scope="session"/>
!</span><br>
</logic:present>
becomes:
User Jim Steinberger !
if the userView object is present and firstName == Jim and lastName == Steinberger.
To insert those values into your JavaScript function:
<logic:present name="UserContainer" property="userView" scope="session">
function AppSubmit() {
str1 = "Submitting this form will begin the approval process.";
str2 = "You will not be able to come back to this form to edit it again.";
str3 = "You also agree that the following statement is true and correct to the best of your knowledge and belief:";
str4 = "";
str5 = "I, <bean:write name="UserContainer" property="userView.firstName" scope="session"/>
<bean:write name="UserContainer" property="userView.lastName" scope="session"/>, hereby certify and state on behalf of <bean:write name="UserContainer" property="userView.companyName" scope="session"/> that the energy use data contained on this form are accurately determined and stated in accordance with federal test procedures set forth in 10 CFR Part 430 or 431, or 42U.S.C.?6314, as applicable, including authorized waivers, as they currently exist on " + new Date().getDate() + "/" + new Date().getMonth() + "/" + new Date().getFullYear() + ".";
str6 = "Do you want to continue submitting this form?";
if((confirm( str1 + "\n" + str2 + "\n" + str3 + "\n\n\n" + str4 + "\n" + str5 + "\n" + str6 ))){
document.forms[0].status.value="Submitted";
document.forms[0].submit();
</logic:present>
Should become:
function AppSubmit() {
str1 = "Submitting this form will begin the approval process.";
str2 = "You will not be able to come back to this form to edit it again.";
str3 = "You also agree that the following statement is true and correct to the best of your knowledge and belief:";
str4 = "I, Jim Steinberger, hereby certify and state on behalf of Dynamic Edge, Inc. that the energy use data contained on this form are accurately determined and stated in accordance with federal test procedures set forth in 10 CFR Part 430 or 431, or 42U.S.C.?6314, as applicable, including authorized waivers, as they currently exist on " + new Date().getDate() + "/" + new Date().getMonth() + "/" + new Date().getFullYear() + ".";
str6 = "Do you want to continue submitting this form?";
if((confirm( str1 + "\n" + str2 + "\n" + str3 + "\n\n" + str4 + "\n" + str5 + "\n\n" + str6 ))){
document.forms[0].status.value="Submitted";
document.forms[0].submit();
after being processed by Tomcat and Struts. (Note: the function will not appear if userView is missing)
By the way, you might be missing the closing bracket to function AppSubmit() { which might throw a JavaScript error. Just FYI :)
Good luck!
Jim Steinberger
[email protected]

ALV Grid with Popup Window

Hey @all,
I want to make a ALV Grid with a Popup Window. The idea is that there is a field for notes and when you click on this field a popup window should be opened where you can insert more text or if text already exists only the first column of the text is shown in field until you click on the field.
Is there any possibility to do it this way? Do I have to make a second Grid for this Popup Window? Do anybody have an example how to solve this problem?
Thank you in advance for your answers!
Greetings,
Alexander

*& Report Z_VISHVAS_ALV1
report z_vishvas_alv1.
type-pools: slis.
data: begin of i_outtab occurs 0.
        include structure sflight.
data:   w_chk type c.                  "For multiple selection
data: end of i_outtab.
      I_OUTTAB TYPE SFLIGHT OCCURS 0,
data: i_private type slis_data_caller_exit,
      i_selfield type slis_selfield,
      w_exit(1) type c.
parameters: p_title type sy-title.
start-of-selection.
select * from sflight into table i_outtab.
call function 'REUSE_ALV_POPUP_TO_SELECT'
       exporting
            i_title                 = p_title
            i_selection             = 'X'
            i_zebra                 = 'X'
          I_SCREEN_START_COLUMN   = 0
          I_SCREEN_START_LINE     = 0
          I_SCREEN_END_COLUMN     = 0
          I_SCREEN_END_LINE       = 0
            i_checkbox_fieldname    = 'W_CHK'
          I_LINEMARK_FIELDNAME    =
          I_SCROLL_TO_SEL_LINE    = 'X'
            i_tabname               = 'I_OUTTAB'
            i_structure_name        = 'SFLIGHT'
          IT_FIELDCAT             =
          IT_EXCLUDING            =
          I_CALLBACK_PROGRAM      =
          I_CALLBACK_USER_COMMAND =
           IS_PRIVATE             = I_PRIVATE
     importing
            es_selfield             = i_selfield
            e_exit                  = w_exit
       tables
            t_outtab                = i_outtab
       exceptions
            program_error           = 1
            others                  = 2.
if sy-subrc <> 0.
   MESSAGE i000(0k) WITH sy-subrc.
endif.
*****the internal table is modified with a cross sign for marking the
***rows selected
loop at i_outtab where w_chk = 'X'.
    write: / i_outtab-carrid, i_outtab-price.
endloop.

Reg:usage of table in popup window

Similar Messages

Maybe you are looking for