Regarding Back Up of ERP systems

Hi Experts,
I want to know if the back up data of our ERP system is lost then is there any way to recover it again?
Please provide me information regarding this question as early as possible.
Thanks and Regards
Kirtish Doshi

Hi,
For the recover of the database, you don't need another parallel system. But you do need free space to store (temporarily) the archived logs you will restore from the tapes before recover the DB.
If you loose 1 of the needed archived logs, you will not be able to recover to a later point in time.
For exemple, your system crashed at 15H00, you ran an oline backup during the previous night starting 03H00 and ending 05H00; your DB is in archive log mode, and you have on tapes the 100 archived logs generated between 03H00 and 14H55. With this you should be able to restore your system as close as possible to the crash time (around 14h55).
If you miss 1 archive log, let's say one that was generated at 10h00, you will not be able to restore to a later time than close before 10h00. If you loose one that was generated at 03h30, you will be able to restore the online backup, and you have to restore the backup of the day before...
Total down time for your system will be restore time of the online backup + recover time of all the archived logs. The more redologs you have, the longer your downtime will be.
Replay archive logs is fastidious, that's why important systems need to be backed-up everyday.
If your system is important enough, there are solutions with standby database to prevent long downtime in case of crashes. (another system with DB in special mode and recover of the archived logs generated on the first system with a short delay.)
Regards,
Antoine

Similar Messages

  • Vat declaration - configuration in erp system

    Hello experts,
    I configured elster vat declaration in PI system as described in sap note 1293294.
    But what I have to configure at erp system? sap note 1293294 only describes that I have to select the Exchange Infrastructure transfer type in transaction FOTED1 in the ERP system (I could not imagine that thsi is all what I have to configure on erp side?).
    I could not find any documentation regarding the configuration in erp system? can you help me?
    we have PI 7.11 and ECC 6.02 System.
    Thanks and best regards
    Christopher
    Edited by: Christopher Kühn on Nov 11, 2009 4:37 PM
    Edited by: Christopher Kühn on Nov 12, 2009 9:07 AM

    Hello,
    you can find the solution to my question in sap nite 1414411 or under the link http://help.sap.com/saphelp_nw04s/helpdata/en/c9/7a1041ebf0f06fe10000000a1550b0/frameset.htm
    best regards!
    Christopher

  • LORD: ERP Quotation passing custom fields to ERP system

    Hi Gurus
    I extended the ERP quotation screen with custom fields which are same like ERP fields using AET and generated the setter and getter and methods for those fields in CRM system , but after entering the values into the custom fields and pressing enter the values are not getting retained , I mean after pressing enter it will communicate with ERP system using RFC call and return back to the CRM systme after that the custom fields are becoming empty, how can I track those values after coming back to the crm system .
    Thanks & Regards
    Madhu

    Hi Madhu,
    I am facing same problem.
    Could you please share your ideas?? It will be helpful to several guys.
    Thanks in advance,
    S.Meganadhan.

  • Cost rates maintained in ERP system and cost elements from PPM 5.0

    Hello experts,
    I will appreciate it if  you could help me with this subject below.
    I want to search in ERP system what cost rates are maintained for each approved worked hour in PPM system. But, I do not know where should I look for this.
    I take a look on the report of the created internal order:
    You can see, that the actual posting of 25.000 is booking in the ERP PROD system on cost element IT-HOURS
    When I display the booked working times I find 5 Hours taht I booked on my personnel number on Internal Order :
    I want to know where in the system  is  maintained the cost rate that calculates automatically the 5 hours booked on cost element IT-HOURS to 25.000 . So each hour costs 5.000. I want to change the amount of each hour from 5000 to 50. 
    I’m not an ERP expert so I don’t know where such rate can be maintained in ERP. I need your expert help!
    Thanks a lot,
    Ruxandra P.

    Hi Ruxandra!
    You have to distinguish plan costs from actual costs. By doing time confirmation (e.g. via CATS) on your internal order the system posts actual costs.
    Using the Role concept of PPM (role-based or task-based) you are dealing (generally spoken) with plan costs. Derived from your entry message I suppose you are already using accounting integration.
    Accounting Integration is a big topic, that is very difficult to generally describe in a posting. Please have a look to the general information in help.sap.com => General Information About Accounting Integration - SAP Portfolio and Project Management - SAP Library
    Please beware: There are many accounting integration scenarios, therefore there are several aspects and places to maintain cost/revenu rates. On the PPM UI you have the possibility to maintain differing cost/revenu-rates per role/task.The rates in general (plan and actuals) are maintained in KP26.
    Also have a look to your business partner (role-based scenario), if there is a cost/revenu rate.
    For time confirmation you can have a look to PA30 => infotype 0315 for your CATS suggestion values (activity type, costcenter, etc...).
    Please come back with any detailed questions, you would like to have answered.
    Regards,
    Peter

  • Transaction ME23N is not opening in a new session of ERP system

    Hi,
    In Solution manager, tcode -> STWB_2 (Test Plan Management - Test Organizer), when i select test plan and click on "Test Packages", then it will take me into the Test plan.
    Here I will select one of the packages and click on status analysis, in the Status analysis screen when i try to Execute and anything (for example here Display Purchase Order),
    I am getting a message as "Transaction ME23N will be started in a new session in ERP", however no such thing is happening.
    All RFCs are working fine, i tested in both Solman and ERP system.
    Can anyone help me out in solving this issue.
    Thank you,
    Siv

    Hi
    Do you have an RFC with current user settings with Trusted one.
    also do your user id has S_RFC authorization object so that you can do remote logon.
    goto sm59 in solman and choose the RFC pointing towards ECC etc and perform remote logon
    Hope it helps and solv ur problem
    Regards
    Prakhar
    Edited by: Prakhar Saxena on Aug 20, 2010 2:01 AM

  • How to active a PDF Based Form in ERP System

    Hi ,
    One of user facing problem "When I try to active a PDF Based Form in ERD, I got the following error: u201CINVALID http CONNECTION : ADSu201D
    Please can anyone help me in this ,what should i do and how to proceed it slove this issue.
    Thanks and Regards
    Brijesh Prasad

    You need
    - an application server JAVA with Adobe Document Service installed
    - you need to configure the connection between that Java instance and your ERP system
    https://www.sdn.sap.com/irj/sdn/adobe
    Markus

  • How to count through put of ABAP Proxy in ERP system

    Hi PI expert.
    At the moment, I am looking for the way to find out
    the number of processed ABAP proxy and also the combination
    of sender/receiver in ERP system.
    Since the number of processed message is a lot,
    I cannot used SXI_MONITOR to count the number and to check
    the combination.
    if there any good way, or report that can be used ?
    Best Regards
    Keiji Mishima

    Hi VJ
    thanks for the information.
    Let me try whether it works.
    Best Regards
    Keiji

  • RFC lookup to PI system or other ERP system.Which is better?

    Hello experts,
    I have a scenario[RFC>PI(RFCLOOKUP,SOAP LOOKUP)->SOAP] where I have to  fetch or update  the data in the table using RFC lookup in the mapping.
    To store or update  the data ,I have created a table in PI system and through RFC LOOKUP I am fetching the data in the message mapping.
                                                                                    Some PI developers prefers not to create this elements in the PI system  and suggested a way to create them in the ERP. 
    I wanted to crosscheck with you all  whether Lookup to PI system is better or to ERP system in terms of  performance, security and std maintenance.
    -Conceptually, they see PI as a communication tool, not the best option for storing data, which is an ERP function.                                                                               
    some prefer  ERP option  to Simplify the upgrade / system patching processes. As No Z-Objects makes the checking process much easier and there is no need to adapt those objects to the new release environment.     
    I appreciate your valuable suggestions.

    Hello Souvik,
    Thank you so much for your reply.
    But in my case the RFC lookup will be executed twice because the authorization data(token ans sign values which is stored in PI) is valid for 12 hours.
    if I find that these data is expired ,I have to do a soap lookup to get these details from a webservice and also have to update the same in the PI table using RFC lookup.All these activities are done in message mapping.
    so first RFC LOOKUP is used  to fetch the data and if expired,I get these details from a webservice and update(executing second time RFC LOOKUP) in PI table ,so that next time when request comes ,I will fetch these details from PI table instead from webservice to send message  to the receiver.
    same functionality is required for 4-5 scenarios,all acessing the same PI table.
    So Kindly advice considering these situation,will the performance,security,maintenance  be good when doing RFC lookup to other ERP instead of doing RFC lookup to PI system .
    Kind Regards,
    Kubra.

  • Transaction launcher parameter not handed over to ERP system

    Hi experts,
    We generated an R3 transaction launcher via the wizzard. We try to hand over the BP_NUMBER to the ERP system.
    This does not work. The entitiy collection in the gdc is not filled.
    Actually it gets the gdc form the view controller of the action box view (GV_VIEW_CONTROLLER->VIEW_ID  = UICMP_LTX/ABoxExecution). See also the coding below.
    method IF_CRM_IC_ACTION_HANDLER~PREPARE_DATA_FLOW.
      data: __gdc    type ref to if_crm_ui_data_context,
            __source type        string,
            __line   type        string,
            __path   type        crmt_ic_ac_identify_path.
    __gdc ?=
    cl_crm_ui_data_context_srv=>get_instance( gv_view_controller ).
    ********** Begin of parameter declaration ***********
    data ICWCPROCESSEDOBJECT
    type ty_ICWCPROCESSEDOBJECT .
    data BP
    type ty_BP .
    data ICWEBCLIENTBORKEYPARAMETER
    type ty_ICWEBCLIENTBORKEYPARAMETER .
    concatenate
    space
    'CURRENTCONTACT/BuilContactPersonStandardAddressRel/BP_NUMBER'
    into __source.
         if __gdc is bound.
           try.
               call method __gdc->GET_ENTITY_ATTRIBUTE_AS_VALUE
                 exporting
                   path = __source
                 importing
                   value = BP .
             catch cx_crm_bdc_no_data cx_crm_bdc_xpath_error cx_root.
               clear BP .
           endtry.
         endif.
    me->set_container_data(
       iv_name  = gc_BP
        iv_value = BP ).
    * Data flow is complete - set to false if data is missing
    gv_data_flow_complete = abap_true.
    endmethod.
    Please help if you have any ideas.
    Regards,
    Thea

    Hi Thea,
    a stupid question, did you confirm the customer previously?
    what happens, when you use the following coding to get current customer?
    *   get confirmed customer of GDC
        TRY.
            lo_customer = __gdc->get_entity( if_iccmp_global_data_cont_con=>gdc_currentcustomer ).
            BP = lo_customer->get_property_as_string( 'BP_NUMBER' ).
          CATCH cx_root.
        ENDTRY.
    maybe this will help...
    best wishes,
    Hakan

  • How to Perform ERP system configuration ?

    Could any one let me know regarding this ERP system configuration. ?
    Thanks in advance,
    Hawkin

    Hi,
    Look for the file --->Installation Guides of SAP ECC 5.0 SR1, which will guide you to setup your system.
    https://websmp104.sap-ag.de/instguides

  • SAP BRIM with FICAX and DIMPS  in a single ERP system

    In our existing the ERP system, the DIMP (Industry extension)  business function set is activated, but we are not using any features or capabiliities that DIMP offers. We now plan to use FI-CAX, Does any one know how to deactivate DIMP and turn 'ON' FI-CAX.
    For example, Can we builld a new instance with DIMP off and FI-CAX 'ON' and do a database copy (refresh) from our our exisitng system to this new instance, does it work or are there any challenges with this approach?

    Yes Finally I Got the solution.
    please check
    >r3trans -d   To Check Conectivity between Apps and DB Server.
    If 000 then its OK- mean connectivity is OK, in this case all work.
    when I was installing Second system then tnsname.ora and listner file was creating and privios system entry was removed.  DUE to that reasion First one goes down.
    Solution:-  Both system entry should be Listner and tnsname file. Then Both server will work.
    **********THANKS TO "AC"**************
    Regards,
    Gokul Chandola

  • How to integrate a sales process across multiple ERP systems with SOA?

    Over time we have merged with multiple companies that used to run on their own ERP system.  In the past we concerted them to our own R/3 instance.  Having recently upgraded from R/3 4.6 to ERP 6.0, we want to transition to a SOA architecture for integrating stand-alone ERP systems.  We are looking for best practices on how to start this transition; i.e., how to use SOA to implement an Order-to-Cash process across separate ERP systems. 
    Here is our scenario:
    The same products are sold through ERP system A and ERP system B.  However, each system represents a different company code with its separate manufacturing plants.  Both systems evolved independently and presently have separate master data.  How do you enable a sales process that dynamically (depending on inventory availability) gets the product either from a plant on system A or B? How do you implement a triangular sale that covers both ERP systems?
    I am looking forward to learn from your experiences and your advice.

    Hi Bernard,
    Like most SOA scenarios, first your scenario requires a detailed fit gap analysis to see which of your existing ERP systems best meet which business process that you want to accomplish at an organisation level. It is only after that, that you can decide which capabilities of SAP SOA can you leverage and how.
    Broadly speaking, SAP's SOA paradigm provides several approaches which you could use depending on your scenarios. For example, if you only need a brokerage between two or more systems (updating or retrieval of data) either synchronously or asynchronously, your best bet is PI (preferably 7.1 because of its ESR and Services Registry). On the other hand, if you require a new application that acts as a controller of flow or processing across various systems, you could use the Composition Environment which provides you with a toolset to build composite applications across various systems (for instance, by registering services from multiple systems on the Services Registry, and then consuming it from say a WebDynpro application).
    The following document might provide you with more insight on this:
    https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/809db91f-9bdf-2910-93be-ca4f0853f929
    Hope this helps!
    Regards,
    Romit

  • PI Integration between SAP ERP system and Cloud for Customer

    Hi,
    We have set up integration between Cloud for Customer tenant and our SAP ERP system via PI.
    For performing initial load, when we try to activate change pointers for Message types in the SALE transaction, we don't find the MATMAS_CFS and DEBMAS_CFS in the ERP system(IDES ECC 6.0 EhP6).
    CODERINT 600(SP1 &2) are installed and BC set COD_BYD_ERP_INT is activated in the system.
    Could anyone let us know what are we missing here, so that we can get the message types.
    Also we tried using Message type MATMAS for sending a message from ERP to Cloud for Customer. In PI message monitoring, the status shows as 'Processed successfully', however we do not find the message in Business Communication Monitoring in the Cloud system. neither do we see the Business Object created for that Material master.
    Please let me know how to debug such a scenario.
    Regards,
    Sangeeta

    Hi Vatsav,
    Yes the outbound works now with the following urls with channel id as param. With the 'BusinessSystem used as the sender(COD) business system ID. Thanks for your help and the document
    Customer Replication
    /XISOAPAdapter/MessageServlet?channel=:<business system>:COD_SOAP_BusinessPartnerReplication_Send
    Customer Address Replication
    /XISOAPAdapter/MessageServlet?channel=:<business system>:COD_SOAP_BusinessPartnerAddress_Send
    Customer Contact Replication
    /XISOAPAdapter/MessageServlet?channel=:<business system>:COD_SOAP_BusinessParterContact_Send
    Regards,
    Sangeeta

  • ERP System Design

    Hii Freinds,
    Myself Priyanka ,and fresher in .net ,I have some queries Please suggest me Right Path,
    I have to Develop ERP Sytem in asp.net MVC4 ,so what steps i have to follow,which platform required for that,Is Visual studio12 Internet Templet used for designing ERP System.
    Regards,
    Priyanka
    [email protected]

    This forum supports .NET Framework setup.
    Your question about MVC4 should be asked in a forum where MVC is discussed.
    I suggest you ask here: http://forums.asp.net/1146.aspx/1?MVC
    Thank you for your understanding.

  • ERP System Failure

    hi guys
    I am getting open error while creating Quote in CRM system
    We have crm and  ecc  systems .We create  quote in CRM in same  gets replicated in ECC system in SD then  goes  for order creation
    Now suddenly  when i click on quote creation in CRM .system  gives  error saying " ERP System failure " Exception condition "EXC_NO_ATTRIBUTES" raised.
    What could be the reason for  same  kindly explain

    Hello Amit,
    Can you please add more information or dump error regarding this issue?
    thanks
    Willie

Maybe you are looking for