Cost rates maintained in ERP system and cost elements from PPM 5.0

Hello experts,
I will appreciate it if  you could help me with this subject below.
I want to search in ERP system what cost rates are maintained for each approved worked hour in PPM system. But, I do not know where should I look for this.
I take a look on the report of the created internal order:
You can see, that the actual posting of 25.000 is booking in the ERP PROD system on cost element IT-HOURS
When I display the booked working times I find 5 Hours taht I booked on my personnel number on Internal Order :
I want to know where in the system  is  maintained the cost rate that calculates automatically the 5 hours booked on cost element IT-HOURS to 25.000 . So each hour costs 5.000. I want to change the amount of each hour from 5000 to 50. 
I’m not an ERP expert so I don’t know where such rate can be maintained in ERP. I need your expert help!
Thanks a lot,
Ruxandra P.

Hi Ruxandra!
You have to distinguish plan costs from actual costs. By doing time confirmation (e.g. via CATS) on your internal order the system posts actual costs.
Using the Role concept of PPM (role-based or task-based) you are dealing (generally spoken) with plan costs. Derived from your entry message I suppose you are already using accounting integration.
Accounting Integration is a big topic, that is very difficult to generally describe in a posting. Please have a look to the general information in help.sap.com => General Information About Accounting Integration - SAP Portfolio and Project Management - SAP Library
Please beware: There are many accounting integration scenarios, therefore there are several aspects and places to maintain cost/revenu rates. On the PPM UI you have the possibility to maintain differing cost/revenu-rates per role/task.The rates in general (plan and actuals) are maintained in KP26.
Also have a look to your business partner (role-based scenario), if there is a cost/revenu rate.
For time confirmation you can have a look to PA30 => infotype 0315 for your CATS suggestion values (activity type, costcenter, etc...).
Please come back with any detailed questions, you would like to have answered.
Regards,
Peter

Similar Messages

  • How to Create an R/3 source system and load data from there

    Hello All,
    Till now I have only worked with Flat files. I want to create an R/3 source system and extract data from there on to my Info Providers.
    Does anyone has detailed steps for that. I am using BW 3.5 system
    Thanks n Regards,
    Abhishek

    1. Type Transaction WE30. Check iDoc types
    2. Type Transaction SM59. Maintain RFC destinations
    a.) Open the RFC Destinations. b.) Find your Source System and double click on it. c.) Technical setting should contain information regarding yoursource system d.) Logon Information should contain source system client and name & password for you remote logon. We use RFC_SAB for BW logon to R/3 and RFC_AAE for R/3 logon to BW. Password for both is always xxxxxxx. e.) Execute your 'Test Connection' & 'Remote Logon'. You should NOT be prompted for a password, if you are then the logon info is incorrect. f.) Repeat above to verify RFCs for other systems (CRM etc)
    3. Type Transaction WE21. iDoc Processing Ports.
    a.) Select 'Ports' and then 'Transactional RFC'. b.) Click on the Port # for you source system. c.) Verify description & SAP R/3 version.(BW 2.1C should be release 4.x) d.) RFC Destination should be one created in SM59. If non-existent then create one
    4. Type Transaction SE16. Data browser (for R/3  BW Connections)
    5. Type Transaction SM30. Msg Types & Assignment to iDocs
    Enter 'EDIMSG' in the Table/View field. Click on the 'Enter Conditions' option for Restrict Data Range. Click 'Maintain'. Select Message Type. Then enter 'RSSEND' in "From' field. Verify that the Basic Type matches what is in your RSBASIDOCtable for each of your connections. If any are missing any entries you must create them as follows: Create another session and type Transaction WE30. Enter IDoc Type (ZSBAXXX) in Obj. Name field (Suggestion: Start new type with 'ZS' + Transfer Structure Prefix + (3)#'s) Select Create. Select "Create from Copy'. Enter 'RSSEND" in 'Copy From' field Enter Description (i.e. IDoc Type for BW Development) Execute (Green Check). Repeat for other missingentries.
    6. Go to the SM30 main screen. Clients Overview
    Enter 'T000' in the Table/View field. Click 'Maintain'. Verify correct Client and Description. If incorrect enter.
    8. On BW Type Transaction WE20. Partner Profiles
    9. On R/3 Type Transaction WE20. Partner Profiles
    10. Check all is correct

  • Results analysis: any way to exclude certain cost element from calculation?

    Hi everyone!
    We are implementing Results Analysis for projects. But the client is asking if there is a way to exclude some cost elements of the results analysis calculation. We are using method 07, POC based in the project milestones.
    This is why they need this. They say that very often they they have costs higher to what they should be according to the month's billing. So they need to send the corresponding part to a WIP account. But not all the costs. They have internal costs (like the hours of internal resources) and external costs (like materials procurement or external services contracts). They only want to send to WIP the exceeding external costs. But leave all the internal costs in a cost account. So to do this we need to exclude these kind of cost elements (secondary cost elements) from the results analysis calculation. Is there any way to do this? Any ideas?
    Thanks in advance!
    Regards,
    Thalos.

    Hi,
    In OKG4, next to Line ID there is a field where you can set "N" which means not to include. Make this settinng for required cost elements / Line ID's and then test the changes.
    Regards
    Sreekanth

  • How to get the values of all elements and sub elements from  following xml

    how to get the values of all elements and sub elements from following xml...
    <?xml version="1.0" encoding="UTF-8" ?>
    <List_AML_Finacle xmlns="http://3i-infotech.com/Cust_AML_Finacle.xsd"
    xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
    xsi:schemaLocation="http://3i-infotech.com/Cust_AML_Finacle.xsd List_AML_Finacle.xsd">
    <TransactionID>TransactionID</TransactionID>
    <Match>
    <Src_Matched_Field>Src_Matched_Field</Src_Matched_Field>
    <List_Matched_Field>
    <FSFM_Matches>
    <NUMBER>NUMBER</NUMBER>
    <TERROR>TERROR</TERROR>
    <TU>TU</TU>
    <NAMEU>NAMEU</NAMEU>
    <DESCRIPT>DESCRIPT</DESCRIPT>
    <KODCR>KODCR</KODCR>
    <KODCN>KODCN</KODCN>
    <AMR>AMR</AMR>
    <ADDRESS>ADDRESS</ADDRESS>
    <SD>SD</SD>
    <RG>RG</RG>
    <ND>ND</ND>
    <VD>VD</VD>
    <GR>GR</GR>
    <YR>YR</YR>
    <MR>MR</MR>
    <CB_DATE>CB_DATE</CB_DATE>
    <CE_DATE>CE_DATE</CE_DATE>
    <DIRECTOR>DIRECTOR</DIRECTOR>
    <FOUNDER>FOUNDER</FOUNDER>
    <TERRTYPE>TERRTYPE</TERRTYPE>
    </FSFM_Matches>
    <OfacMatchDetails>
    <UID>UID</UID>
    <TITLE>TITLE</TITLE>
    <SDNTYPE>SDNTYPE</SDNTYPE>
    <REMARKS>REMARKS</REMARKS>
    <ID_UID>ID_UID</ID_UID>
    <IDTYPE>IDTYPE</IDTYPE>
    <IDNUMBER>IDNUMBER</IDNUMBER>
    <IDCOUNTRY>IDCOUNTRY</IDCOUNTRY>
    <ISSUEDATE>ISSUEDATE</ISSUEDATE>
    <EXPIRATIONDATE>EXPIRATIONDATE</EXPIRATIONDATE>
    <ADDRESS1>ADDRESS1</ADDRESS1>
    <ADDRESS2>ADDRESS2</ADDRESS2>
    <ADDRESS3>ADDRESS3</ADDRESS3>
    <CITY>CITY</CITY>
    <STATEORPROVINCE>STATEORPROVINCE</STATEORPROVINCE>
    <POSTALCODE>POSTALCODE</POSTALCODE>
    <COUNTRY>COUNTRY</COUNTRY>
    </OfacMatchDetails>
    </List_Matched_Field>
    </Match>
    </List_AML_Finacle>

    avoid multi post
    http://forum.java.sun.com/thread.jspa?threadID=5249519

  • PI Integration between SAP ERP system and Cloud for Customer

    Hi,
    We have set up integration between Cloud for Customer tenant and our SAP ERP system via PI.
    For performing initial load, when we try to activate change pointers for Message types in the SALE transaction, we don't find the MATMAS_CFS and DEBMAS_CFS in the ERP system(IDES ECC 6.0 EhP6).
    CODERINT 600(SP1 &2) are installed and BC set COD_BYD_ERP_INT is activated in the system.
    Could anyone let us know what are we missing here, so that we can get the message types.
    Also we tried using Message type MATMAS for sending a message from ERP to Cloud for Customer. In PI message monitoring, the status shows as 'Processed successfully', however we do not find the message in Business Communication Monitoring in the Cloud system. neither do we see the Business Object created for that Material master.
    Please let me know how to debug such a scenario.
    Regards,
    Sangeeta

    Hi Vatsav,
    Yes the outbound works now with the following urls with channel id as param. With the 'BusinessSystem used as the sender(COD) business system ID. Thanks for your help and the document
    Customer Replication
    /XISOAPAdapter/MessageServlet?channel=:<business system>:COD_SOAP_BusinessPartnerReplication_Send
    Customer Address Replication
    /XISOAPAdapter/MessageServlet?channel=:<business system>:COD_SOAP_BusinessPartnerAddress_Send
    Customer Contact Replication
    /XISOAPAdapter/MessageServlet?channel=:<business system>:COD_SOAP_BusinessParterContact_Send
    Regards,
    Sangeeta

  • ERP system to accept tickets from more than one source

    I have the following scenario.
    My back end ERP system accepts tickets from my EP. The EP cert is imported into ERP.
    I want to enable SSO between CRM and ERP. CRM does not interact with the EP.
    Can I have more than 1 certificate imported and added to the ACL in my ERP system(i.e. from my EP and ALSO from CRM)?
    Many Thanks,
    Derek.

    Yes. We have portal and another standalone java instance doing SSO to ERP.
    -RK

  • Exclude cost elements from settlements

    Hi,
    we are trying to run a settlement from WBS to AuC. When running the settlement we receive error KD503 ( 'Complete allocation structure &'). We have postings on the WBS of which some are relevant for capitalization and some are not. We excluded the cost elements not relevant for capitalization from the allocation structure.
    Is there any way to run a summary settlement and to exclude specific cost elements?
    regards, simon

    Hi Simonderine,
    Check all the debited cost elements on WBSE are included or not for capitalizing and for settlemenet to Cost center as per your Allocation structure mentioned in the settlement profile.
    Make sure that all cost elements should be included in the allocation structure.
    This error is mainly occurs, if any one of the cost element with debit entry at WBS Element level is not included in the allocation structure, whether it may be settled to AUC or CC as per your business requirement.
    Hope this helps you !!
    Br
    Hari.

  • COPA- Cost-Based Chagning KSTAR(Cost Element) from technical to fixed field

    In the PA module-
    What are the implications with modifying the COPA field catalog in table v_tkef. That is changing a technical field (T) into a fixed characteristic or alternatively modifying the function module rke_external_data_get to allow technical fields to do the same functionality as B, S, U, or V.
    B- Basic key figure
    D- Dimension (characteristic)
    F- Fixed characteristic
    K- Key figure
    S- Fixed basic key figure
    T- Technical field
    U- Unit
    V- Fixed unit
    Details of Issue-
    We are using Cost-based COPA and there a requirement to post actual and plan documents by cost element in PA. However Cost element (KSTAR) is a technical field in cost based COPA.
    We would like the implications of modifying the field characteristics of KSTAR from technical to Fixed characteristic and setup the KSTAR as a characteristic within the Operating Concern.
    Your answers will be helpful in knowing the implications, feasibility and recommendations.
    Thanks,
    Krishna

    Hi,
    YOu are making that kink on CJIC where you can assign fix asset to WBS , before doing that you needs to check procured items agaist that particular WBS(on CJI3) & get create fix asset. To my knowledge that is the standard way to link fix asset & WBS rather than having ABAP validation.
    Regards,
    SL

  • HIde Menu,System and Command Promt from transaction ivew

    Hi,
    Our client has implemented SAP HR module, year back.
    Now they are implementing ESS and they have done some developments for CLAIMS in R/3 earlier. Now they want to see those claims in portal. For that we have created transactional iview. Its coming fine in portal. But the only problem is that, its displaying sap standard menu. i.e menu, system and command promt in portal. Now my concern is how to hide these things ???
    Useful Answer's will rewarded.

    Put these parameters
    ~noHeaderOkCode = 1
    ~webTransactionType = EWT.
    in transaction sicf
    ->sap->bc->gui->sap->its-> Webgui
    push button gui configuration and set the parameters
    check with se93 if transaction is web enabled
    regards

  • Price of Upgrade to Photoshop Elements 13 and Premier Elements from both in version 10

    Since the Adobe site is almost impossible to use in resolving problems, and any reference to Contact Us means Forums not Adobe themselves (fancy a Customer wanting to Contact the Company themselves - the cheek of it!) could anyone please advise what the cost would be to upgrade from Photoshop Elements 10 and Premier Elements 10 to their respective 13 versions. Thank you.

    Thank you for your quick response. Unfortunately after clicking through this link (and then a further 7 or 8 more) I got to a page that quoted £100 for the two. I''m sure this is a discounted price for a new purchase, and whilst I understand you will always get the full product when upgrading from one version of Adobe to the next, I do not think it is acceptable to charge such a large amount when I have already paid full price for a not very old previous version. Have I clicked to the wrong page? Does anyone have a link for direct access to upgrade that is at a much more reasonable price? Whilst I know software developers do not try and compete with large high street retailers, I believe I can purchase both Adobe suites as a package from a well known one for much less than this! Thank you.

  • How to install Lightroom and Photoshop Elements from my old pc to my new pc?

    I have a new pc and want to install Lightroom 5.7 and Photoshop Elements 12 from my old pc to the new one.

    For LR here is a useful link:
    http://www.lightroomqueen.com/how-move-lightroom-to-new-computer/
    There is also a video tutorial which covers moving a LR catalog to a new computer:
    http://tv.adobe.com/watch/the-complete-picture-with-julieanne-kost/how-to-migrate-lr-to-an other-computer/
    For Elements you can simply install the application and then set up the Elements Editor for external editing in the LR Library prefs. I’m assuming you won’t be using Oranizer as well as LR. That can lead to confusion and broken links unless you are very disciplined.
    If you do intend to use Organizer the method is backup and restore, starting with an Organizer backup on the old PC.
    http://helpx.adobe.com/photoshop-elements/kb/backup-restore-move-catalog-photoshop.html

  • How can I play my ITunes music stored on my IMac via Apple TV through my home theatre system and control it from my IMac?

    My ITunes library is stored on my IMac which is connected to B&W desktop speakers. My music system is connected to my IMac via USB through a Benchmark DAC. I use Pure Music software and am able to simultaneously play music on my IMac in my study and my main music system in the living room.
    My home theatre system is connected by Apple TV via the home network to the IMac. I can access my ITunes library from the TV using the Apple TV remote control. But when I try to play music from the computer and stream to the TV / home theatre, I am unable to make the connection. I tried activating Airplay, but I still cannot get the music to play.
    I would appreciate any advice on how to set this up.

    Thanks for the suggestion. I subsequently realized that my Airplay settings on ITunes are ok. The problem is with the settings on Pure Music. I still havent figured this out. When i stream using just ITunes, it works fine, but when I play music using ITunes / Pure Magic, I still have an issue with Apple TV.

  • Upgraded operating system and Photoshop elements says invalid license key

    HI i used PSE 7 on my windows 7 PC. Now i have upgraded to windows8.1
    I redownlaoded PSE7 from adobe site and when i enter old serial it says inavalid serial. please helip to install it on the new OS

    Error "The serial number is not valid for this product" | Creative Suite

  • Dynamically create empty mcs and asign elements from array and loadmovie

    I'm creating an educational game for my school students.
    A little boy is flying through the city when he encounters objects flying from left to right.
    He hears a SOUND eg: Dog - he must go and click the dog image with the flying cursor. There are at least 5 DIFFERENT objects that should be flying on the screen. There could be various of them at any one time.
    I have the roots of the images in an xml file. And the actual swf are in a file called IMAGE and the sounds in SOUND.
    My problem is that most tutorials I see use the attachmovie method but I don't want to put all the swf's in the library as there are hundreds.
    I have to use the loadmovie method.
    I take it I have to loop through the array and assign each element to an empty movieclip which in turn is in the loop so you get 5 empty clips - I will use i (index). It doesn't seem to be working. I shall keep trying and post back here if I get any luck but I'm running out of ideas.
    Then the objects have to float across the screen. Don't know whether to use tween object or onEnterFrame handler or other. AND someone has mentioned using setinterval to "spit out" the objects.
    BUT if I have five flying across the screen I'm left without clips to stick in any more.
    Oh my head hurts but I will keep going.
    CHEERS if any help is around. This should be quite a standard thng for game developpers. Code at the moment
    function loadEnemies():Void {
    enemy_xml = new XML();
    enemy_xml.ignoreWhite = true;
    enemy_xml.onLoad = function(success:Boolean) {
    if (success) {
    _root.parseEnemyXML();
    //enemy_xml.load("level_"+level+".xml");
    enemy_xml.load("data/animal_catch.xml");
    function parseEnemyXML():Void {
    rows = enemy_xml.firstChild.childNodes.length;
    for (var i:Number = 0; i<rows; i++) {
    var row_string:String = String(enemy_xml.firstChild.childNodes[i].firstChild.firstChild);
    _root["row_"+i+"_array"] = row_string; //MAIN ARRAY holds an array images/dog_a.swf/ images/cat_a.swf etc... all five
    _root.createEmptyMovieClip("enemyObjects", 1);
    enemyObjects.createEmptyMovieClip("holder_"+i, i);
    _root["object"+i] = new Sound(enemyObjects["holder_"+i]);
    trace(row_string);
    loadMovie["row_"+i+"_array"], ["holder_"+i]
    if (level == 1) {
    alerts_mc.play();
    } else {
    currRow = 0;
    rowCounter = 0;
    OK got to about here BUT
    a. I started to get confused around the createEmptyMovieClip part
    b. I KNOW I shouldn't have Sound(enemyObjetcs etc... BUT I copied the code from a tutorial and I don't know what to replace it with.
    I'm close but I need a little polishing.

    It doesn't do you much good to work with borrowed code that you do not understand.  Your best bet will be to start small, creating one functional piece of the puzzle at a time, and work your way up.  Start with making sure you are loading and parsing the xml properly, then set about loading the external content, then see about making that content move around, etc...
    In the code you show, your loadMovie line of code does not resemble anything I have seen before, looking more like (but not quite like) a multi-dimensional array element than a loadMovie() function call.  If you find you need to have control of the items as soon as they load, then you should consider using MovieClipLoader.loadClip instead of loadMovie.  The MovieClipLoader class provides features, such as to be able to determine when items have fully loaded.

  • I bought and downloaded Elements from the app store. Why are most of the items prayed out?

    Why is it that Adobe Photoshop Elements 12, downloaded via the App store shows all items on the file menu grayed out?

    No, you bought Photoshop Elements Editor when you bought it from the app store. No organizer. You don't import photos, merely use File>Open to get them into the editor. You can't access your iphoto library because that's not how you do it. The iphoto library is a proprietary database for iphoto's own use and poking around in it from outside iphoto is the fastest way to corrupt it and lose all your pics. If you use iphoto you have two choices:
    1. Set PSE as your external editor in iphoto and send the photos from there. Save, not Save As and iphoto will remember your original plus the last saved edits, although you must lose the edits to revert to the original again. If you see the Save As window, it's not going to work. You may need to set the PSE prefs>saving files>on first save to Save Over Original to get this working.
    2. Export the photos from iphoto, edit the exports and save them, making all the changes you want, then import the edited pics back to iphoto as new files.

Maybe you are looking for